Driving forces of protein partitioning in an ionic liquid-based aqueous two-phase system

Novel Biorefinery Approach for Phycocyanin Extraction and Purification and Biocrude Production from Arthrospira platensis

A new biorefinery from Arthrospira platensis was proposed to obtain phycocyanin (PC) and a biocrude by hydrothermal liquefaction (HTL). PC is a high-added-value phycobiliprotein widely used as a food colorant and in the nutraceutical and pharmaceutical industries. However, the use of conventional solvents in the extraction process and the purity grade of the extract are shortcomings in bioproduct production. PC was extracted using a reusable ionic liquid [EMIM][EtSO₄], achieving a PC purity of the lowest commercial grade. Therefore, two downstream processes were applied: (1) dialysis + precipitation and (2) aqueous two-phase system (ATPS) + dialysis + precipitation. After the second purification process, the PC purity increased remarkably to reach the analytical grade for pharmaceutical and nutraceutical applications. The waste biomass (WB) obtained in the PC extraction was valorized by hydrothermal liquefaction (HTL) to produce a biocrude. The biocrude yield and composition remarkably enhanced using isopropanol at 350 °C as a cosolvent.

Microalgae biomass deconstruction using green solvents: Challenges and future opportunities

Microalgae enablefixation of CO₂into carbohydrates, lipids, and proteins through inter and intracellularly biochemical pathways. These cellular components can be extracted and transformed into renewable energy, chemicals, and materials through biochemical and thermochemical transformation processes.However, recalcitrant cell wall andlack of environmentally benign efficient pretreatment processes are key obstacles in the commercialization of microalgal biorefineries.Thus,current article describes the microalgal chemical structure, type, and structural rigidity and summarizes the traditional pretreatment methods to extract cell wall constituents. Green solvents such as ionic liquid (ILs), deep eutectic solvents (DES), and natural deep eutectic solvents (NDESs) have shown interesting solvent characteristics to pretreat biomass with selective biocomponent extraction from microalgae. Further research is needed in task-specific IL/DES design, cation-anion organization, structural activity understanding of ILs-biocomponents, environmental toxicity, biodegradability, and recyclability for deployment of carbon-neutral technologies. Additionally, coupling the microalgal industry with biorefineries may facilitate waste management, sustainability, and gross revenue.

Molecular interaction of di-ester bonded cationic Gemini surfactants with pepsin: in vitro and in silico perspectives

The implications of surfactant-enzyme/protein interactions in a variety of fields, including biotechnology, cosmetics, paints and pharmaceuticals, have attracted a lot of attention in contemporary studies. Herein, we have employed several in vitro and in silico techniques such as excitation and absorption spectroscopies, circular dichroism and FT-IR spectroscopies, density functional and molecular dynamics simulations to understand the interaction behavior of oxy-diester-based green cationic Gemini surfactants, N1,N1,N14,N14-tetramethyl-2,13-dioxo-N1,N14-dialkyl-3,6,12-tetraoxateradecane-1,14-diaminiumdichloride (abbreviated as Cm-E2O2-Cm, where 'm' stands for alkyl chain length, m = 12 and 14) with one of the main digestive proteins, pepsin. The spectroscopic techniques confirm the static quenching effect of surfactants on pepsin. The calculated physical parameters (Ksv, Kb and ΔG) and their order reveal the distinguished implications for the surfactants' chain lengths. The spontaneity of interaction was also confirmed by negative Gibbs free energy change values. The extrinsic spectroscopic study with pyrene as fluorescence probe, FT-IR and CD techniques indicated a potential conformational change in pepsin induced by the Gemini surfactants. DFT, docking and MD simulations provided the theoretical understanding regarding the quantum mechanical environment, location of binding and stability of the protein-surfactant complexation in energy terms. We believe this study will be a humble addition to our existing knowledge in the field of protein-surfactant interactions.Communicated by Ramaswamy H. Sarma.

Efficient Separation of Proteins and Polysaccharides from Dendrobium huoshanense Using Aqueous Two-Phase System with Ionic Liquids

By applying the hydrophilic ionic liquid, 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl), and inorganic salts (K₃PO₄), an ionic liquid aqueous two-phase system (ILATPS) was established for the separation of Dendrobium huoshanense polysaccharides (DhPs) and proteins. The effects of inorganic salt concentration, IL quantity, crude DhPs concentration, pH value and temperature were studied to achieve the optimal condition. With the best combination of ILATPS (1.75 g K₃PO₄, 1.25 g [C₄mim]Cl, 10 mg crude DhPs and 5.0 mL ddH₂O at pH 7.0 under 25 °C), the extraction efficiency rates for DhPs and proteins were 93.4% and 90.2%, respectively. The processed DhPs retrieved from the lower salt-rich phase comprised mannose, glucose, galactose, arabinose, and galacturonic acid with a molar ratio of 185:71:1.5:1:1 and the molecular weight was 2.14 × 10⁵ Da. This approach is fast, simple and environmentally friendly. It provides a new insight into purifying functional polysaccharides of plant origin.

Separation of Albumin from Bovine Serum Applying Ionic-Liquid-Based Aqueous Biphasic Systems

In this work, the extraction and separation of bovine serum albumin (BSA) from its original matrix, i.e., bovine serum, was performed using a novel ionic-liquid-based aqueous biphasic system (IL-based ABS). To this end, imidazolium-, phosphonium-, and ammonium-based ILs, combined with the anions’ acetate, arginate and derived from Good Buffers, were synthesized, characterized, and applied in the development of ABS with K2HPO4/KH2PO4 buffer aqueous solutions at pH 7. Initial studies with commercial BSA revealed a preferential migration of the protein to the IL-rich phase, with extraction efficiencies of 100% obtained in a single-step. BSA recovery yields ranging between 64.0% and 84.9% were achieved, with the system comprising the IL tetrabutylammonium acetate leading to the maximum recovery yield. With this IL, BSA was directly extracted and separated from bovine serum using the respective ABS. Different serum dilutions were further investigated to improve the separation performance. Under the best identified conditions, BSA can be extracted from bovine serum with a recovery yield of 85.6% and a purity of 61.2%. Moreover, it is shown that the BSA secondary structure is maintained in the extraction process, i.e., after being extracted to the IL-rich phase. Overall, the new ABS herein proposed may be used as an alternative platform for the purification of BSA from serum samples and can be applied to other added-value proteins.

High-Throughput Method for Natural Organic Matter Hydrophobicity Assessment Using an Ionic Liquid-Based Aqueous Two-Phase System

Hydrophobicity of natural organic matter (NOM) is one of its fundamental properties that influence the environmental fate of pollutants and the performance of many water treatment unit processes. In this study, a high-throughput method was developed for NOM hydrophobicity measurement based on the phase separation technique in the 96-well format. It measures the partition coefficients of NOM (K_ATPS,IL) in an ionic liquid (IL)-based aqueous two-phase system (ATPS). The ATPS was made of 1-butyl-3-methylimidazole bromide solution and a salt solution containing potassium phosphate monobasic and potassium phosphate dibasic. The partition of NOM in IL-based ATPS is mainly affected by its hydrophobicity. log K_ATPS,IL linearly correlated with the commonly used NOM hydrophobicity scales, including (O + N)/C, O/C, and aromatic carbons. K_ATPS,IL provided a more accurate assessment of NOM hydrophobicity than spectroscopic indices. Furthermore, K_ATPS,IL can predict the organic carbon-water partition coefficients for hydrophobic organic chemical sorption to NOM based on the two-phase system model. The high-throughput K_ATPS,IL measurement and the two-phase system model can be applied to real surface water samples. Our results suggest that the proposed high-throughput method has great potential to be applied to monitor NOM hydrophobicity for environmental risk assessment and water treatment purposes.

Evaluation of Aqueous Biphasic Electrophoresis System Based on Halide-Free Ionic Liquids for Direct Recovery of Keratinase

Aqueous biphasic electrophoresis system (ABES) incorporates electric fields into the biphasic system to separate the target biomolecules from crude feedstock. Ionic liquid (IL) is regarded as an excellent candidate as the phase-forming components for ABES because of the great electrical conductivity, which can promote the electromigration of biomolecules in ABES, and thereby enhances the separation efficiency of the target biomolecules from crude feedstock. The application of electric fields to the conventional biphasic system expedites the phase settling time of the biphasic system, which eases the subsequent scaling-up steps and reduces the overall processing time of the recovery process. Alkyl sulphate-based IL is a green and economical halide-free surfactant when compared to the other halide-containing IL. The feasibility of halide-free IL-based ABES to recover Kytococcus sedentarius TWHK01 keratinase was studied. Optimum partition coefficient (Ke = 7.53 ± 0.35) and yield (YT = 80.36% ± 0.71) were recorded with IL-ABES comprised of 15.0% (w/w) [EMIM][ESO4], 20.0% (w/w) sodium carbonate and 15% (w/w) crude feedstock. Selectivity (S) of 5.75 ± 0.27 was obtained with the IL-ABES operated at operation time of 5 min with 10 V voltage supplied. Halide-free IL is proven to be a potential phase-forming component of IL-ABES for large-scale recovery of keratinase.

Effects of Ionic Liquids on Metalloproteins

In the past decade, innovative protein therapies and bio-similar industries have grown rapidly. Additionally, ionic liquids (ILs) have been an area of great interest and rapid development in industrial processes over a similar timeline. Therefore, there is a pressing need to understand the structure and function of proteins in novel environments with ILs. Understanding the short-term and long-term stability of protein molecules in IL formulations will be key to using ILs for protein technologies. Similarly, ILs have been investigated as part of therapeutic delivery systems and implicated in numerous studies in which ILs impact the activity and/or stability of protein molecules. Notably, many of the proteins used in industrial applications are involved in redox chemistry, and thus often contain metal ions or metal-associated cofactors. In this review article, we focus on the current understanding of protein structure-function relationship in the presence of ILs, specifically focusing on the effect of ILs on metal containing proteins.

Use of Ionic Liquids in Protein and DNA Chemistry

Ionic liquids (ILs) have been receiving much attention as solvents in various areas of biochemistry because of their various beneficial properties over the volatile solvents and ILs availability in myriad variants (perhaps as many as 108) owing to the possibility of paring one cation with several anions and vice-versa as well as formulations as zwitterions. Their potential as solvents lies in their tendency to offer both directional and non-directional forces toward a solute molecule. Because of these forces, ionic liquids easily undergo intermolecular interactions with a range of polar/non-polar solutes, including biomolecules such as proteins and DNA. The interaction of genomic species in aqueous/non-aqueous states assists in unraveling their structure and functioning, which have implications in various biomedical applications. The charge density of ionic liquids renders them hydrophilic and hydrophobic, which retain intact over long-range of temperatures. Their ability in stabilizing or destabilizing the 3D-structure of a protein or the double-helical structure of DNA has been assessed superior to the water and volatile organic solvents. The aptitude of an ion in influencing the structure and stability of a native protein depends on their ranking in the Hofmeister series. However, at several instances, a reverse Hofmeister ordering of ions and specific ion-solute interaction has been observed. The capability of an ionic liquid in terms of the tendency to promote the coiling/uncoiling of DNA structure is noted to rely on the basicity, electrostatic interaction, and hydrophobicity of the ionic liquid in question. Any change in the DNA's double-helical structure reflects a change in its melting temperature (T m), compared to a standard buffer solution. These changes in DNA structure have implications in biosensor design and targeted drug-delivery in biomedical applications. In the current review, we have attempted to highlight various aspects of ionic liquids that influence the structure and properties of proteins and DNA. In short, the review will address the issues related to the origin and strength of intermolecular interactions, the effect of structural components, their nature, and the influence of temperature, pH, and additives on them.

Effective separation of prolyl endopeptidase from Aspergillus Niger by aqueous two phase system and its characterization and application

Aspergillus niger prolyl endopeptidase (An-PEP) has become a research focus because of its advantages in specifically cleaving the C-terminal peptide bond of proline residues, especially it was an industrial food-grade acidic PEP. Aqueous two-phase system (ATPS) was first applied for separating An-PEP from fermentation broth. Via response surface method (RSM) experiment, an effectively separation of An-PEP was achieved by ATPS containing27% (w/w) ethanol and 14.5% (w/w) (NH₄)₂SO₄ at pH 6.0 with the recovery of 90.29 ± 0.23% and purification coefficient of 15.35 ± 0.30. The purified An-PEP was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fourier transform infrared (FTIR) and fluorescence spectrometry. The optimum temperature and pH of An-PEP were 40 °C and 4.5-5.0, respectively. An-PEP was activated and stabilized by Ca²⁺ but inhibited by Fe³⁺. The enzymatic application of purified An-PEP was evaluated by hydrolyzing egg white protein (EWP) to prepare bioactive peptides. The obtained hydrolysates had good scavenging ability of OH and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radicals, angiotensin converting enzyme (ACE) inhibitory activity and anti-gout activity. This research realized a low-cost, high-efficiency and simple separation technology of An-PEP and provided a broader idea for the preparation of bioactive peptides and the application of An-PEP.

Polyethyleneimine as a tool for compounds fractionation by flocculation in a microalgae biorefinery context

In the context of emerging biorefinery for microalgae, polyethyleneimine (PEI), has been tested in order to achieve separation of fat-soluble and water-soluble compounds from Haematococcus pluvialis. Several parameters were taken into account (ratio between sample and PEI, pH, and ionic strength) and 2 conditions (0.075% PEI pH 7.4, and 0.100% PEI pH8.5) were studied for up-scalability, with a recovery of flocculated compounds (lipids and pigments), and a complete characterization of both phases. Using 0.075% PEI, pH7.4, 100% sugars and 89.8% proteins were retained in the supernatant, but some trace of beta-carotene were also detected. For 0.100% PEI, pH 8.5, a loss in proteins content was highlighted (61.2% proteins retained), but no residual lipids or pigments were detected. PEI could therefore be considered as an efficient method to fractionate fat-soluble and water-soluble compounds from microalgae.

Efficiency of Ionic Liquids-Based Aqueous Two-phase Electrophoresis for Partition of Cytochrome c

Cytochrome c is a small water-soluble protein that is abundantly found in the mitochondrial intermembrane space of microorganism, plants and mammalians. Ionic liquids (ILs)-based aqueous two-phase electrophoresis system (ATPES) was introduced in this study to investigate the partition efficiency of cytochrome c to facilitate subsequent development of two-phase electrophoresis for the separation of cytochrome c from microbial fermentation. The 1-Hexyl-3-methylimidazolium bromide, (C₆mim)Br and potassium citrate salt were selected as the phase-forming components. Effects of phase composition; position of electrodes; pH and addition of neutral salt on the partition efficiency of cytochrome c in the ATPES were evaluated. Highest partition coefficient (K = 179.12 ± 0.82) and yield of cytochrome c in top phase (Y_T = 99.63% ± 0.00) were recorded with IL/salt ATPES composed of 30% (w/w) (C₆mim)Br and 20% (w/w) potassium citrate salt of pH 7 and 3.0% (w/w) NaCl addition with anode at the bottom phase and cathode at the top phase. The SDS-PAGE profile revealed that cytochrome c with a molecular weight of 12 kDa was preferably partitioned to the IL-rich top phase. Present findings suggested that the single-step ATPES is a potential separation approach for the recovery of cytochrome c from microbial fermentation. Graphical Abstract.

Effects of charge balance and hydrophobicity of the surface of cytochrome c on the distribution behaviour in an ionic liquid/buffer biphasic system

Factors contributing to the different distribution behaviour of cytochrome c were investigated in a biphasic tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate and potassium phosphate buffer system, which shows a lower critical solution temperature. To change charge balance and hydrophobicity of cytochrome c, surface modification with a few modifier molecules was applied. Surface charge and hydrophobicity affected the distribution behavior of chemically modified cytochrome c in the tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate and potassium phosphate buffer biphasic system. The distribution ratio into tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate decreased with decreasing isoelectric point of cytochrome c. Furthermore, cytochrome c possessing a low isoelectric point showed different distribution ratio depending on surface hydrophobicity. Taken together, these findings indicate that isoelectric point and surface hydrophobicity of cytochrome c are important factors controlling the distribution behavior in temperature sensitive biphasic systems.

Investigation of binding interactions between BSA and [EPMpyr][Sal] through spectroscopy studies, thermophysical and thermodynamic properties

The intensity of research, probing the interactions between proteins and ionic liquid (IL), has been increasing and parallels the fast-growing applications of ILs in biotechnology. The specific aspects which have attracted the involvement of researchers are stabilization, separation, biochemical and enzymatic reactions of proteins. In this work the synthesis of IL, epoxypropyl and N-methyl substituted 2‑oxopyrrolidinium cation with salicylate anion, [EPMpyr][Sal], and its interaction with aqueous BSA{BSA_(aq)-[EPMpyr][Sal]}. Measurements of thermophysical properties (density (ρ), and speed of sound (u)) showed that both moderately strong and weak interactions occur on treatment of BSA with that chosen IL. H-bond formation, dipole-dipole interactions and ionic interactions occurring in this system were investigated via thermophysical and thermodynamic properties as well as spectroscopic data. Thermodynamic data (excess molar volume (V_m^E), isentropic compressibility (k_s), deviation in isentropic compressibility (∆k_s) and intermolecular free length (L_f)) showed that there were stronger interaction between IL and BSA at higher temperature. The data from all the studies were correlated with Redlich Kister polynomial equation. The blue shift observed in the fluorescent spectra was interpreted to indicate that thetryptophan (Trp) residue of BSA moves to a more hydrophobic environment. It was also observed that the addition of more IL to BSA resulted in denaturation of BSA due to high hydrophobic nature of IL. Circular dichroism studies show that there were significant changes in the fine structure of BSA on interaction with IL. From the FTIR spectra the position of H-bond in the secondary structure of BSA was deduced.

Eco-Innovation in Reusing Food By-Products: Separation of Ovalbumin from Salted Egg White Using Aqueous Two-Phase System of PEG 1000/(NH₄)₂SO₄

For the purpose of reducing pollution and the rational use of salted egg white, which is a byproduct of the manufacturing process of salted egg yolk, an aqueous two-phase system (ATPS) composed of polyethylene glycols (PEG 1000) and (NH₄)₂SO₄ was investigated to selectively separate ovalbumin (OVA) from salted egg white. With the aim of optimizing the selective separation of OVA using ATPS, a response surface method (RSM) experiment was carried out on the basis of a single-factor experiment. The OVA was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS⁻PAGE), reversed-phase high-performance liquid chromatography (RP-HPLC), liquid chromatography-nano electrospray ionization mass spectrometry (Nano LC-ESI-MS/MS), and Fourier transform infrared spectroscopy (FT-IR). Under the optimal conditions, the recovery yield of OVA through ATPS (Y) and the purity of OVA (P) could reach 89.25% and 96.28%, respectively. In conclusion, OVA was successfully separated from the salted egg white by PEG/(NH₄)₂SO₄ ATPS.

Understanding the Effect of Ionic Liquids as Adjuvants in the Partition of Biomolecules in Aqueous Two-Phase Systems Formed by Polymers and Weak Salting-Out Agents

Ionic liquids (ILs) as adjuvants in polymer-salt aqueous two-phase systems (ATPS) have been used to improve the extraction of biomolecules. However, the impact of ILs as adjuvants on the partition of biomolecules is still poorly understood. Previous works mostly focused on ATPS based on strong salting-out agents, which may mask the IL effect. In this work, ATPS formed by polyethylene glycol (PEG 400) and a weak salting-out salt ((NH₄)₂SO₄) with a wide number of ILs as adjuvants (chloride-based combined with cholinium, imidazolium, pyrrolidinium, piperidinium, tetralkylammonium and tetralkylphosphonium cations) were investigated. The respective phase diagrams were determined, and the systems extraction performance for a wide range of biomolecules (phenolic compounds, alkaloids and amino acids) was investigated. The results obtained show that ILs as adjuvants in polymer-salt ATPS modulate the partition of biomolecules. In particular, more hydrophobic ILs significantly enhance the partition of more hydrophobic biomolecules to the PEG-rich phase (where the IL is enriched). Furthermore, the intensity of the IL effect is more pronounced when using weak salting-out agents. A linear correlation between the biomolecules and the ILs partition coefficients, and with the biomolecules octanol-water partition coefficients, was found. In most ATPS formed by polymers and salts using ILs as adjuvants, the biomolecules partition is driven by the ILs partition and by the difference in hydrophobicity between the coexisting phases.

Purification of the Recombinant Green Fluorescent Protein Using Aqueous Two-Phase System Composed of Recyclable CO2-Based Alkyl Carbamate Ionic Liquid

The formation of aqueous two-phase system (ATPS) with the environmentally friendly and recyclable ionic liquid has been gaining popularity in the field of protein separation. In this study, the ATPSs comprising N,N-dimethylammonium N′,N′-dimethylcarbamate (DIMCARB) and thermo-responsive poly(propylene) glycol (PPG) were applied for the recovery of recombinant green fluorescent protein (GFP) derived from Escherichia coli. The partition behavior of GFP in the PPG + DIMCARB + water system was investigated systematically by varying the molecular weight of PPG and the total composition of ATPS. Overall, GFP was found to be preferentially partitioned to the hydrophilic DIMCARB-rich phase. An ATPS composed of 42% (w/w) PPG 1000 and 4.4% (w/w) DIMCARB gave the optimum performance in terms of GFP selectivity (1,237) and yield (98.8%). The optimal system was also successfully scaled up by 50 times without compromising the purification performance. The bottom phase containing GFP was subjected to rotary evaporation of DIMCARB. The stability of GFP was not affected by the distillation of DIMCARB, and the DIMCARB was successfully recycled in three successive rounds of GFP purification. The potential of PPG + DIMCARB + water system as a sustainable protein purification tool is promising.

The role of ionic liquid [C4 C1 im]Br as an adjuvant on the two-phase formation and the extraction of l-phenylalanine in ABS composed of PEG400 and potassium citrate at different temperatures

The potential of {polyethylene glycol 400 + potassium citrate} aqueous biphasic system (ABS) with ionic liquid (IL) 1-butyl-3-methylimidazolium bromide ([C₄ C₁ im]Br) as an adjuvant is examined for the extraction of l-phenylalanine (Phe), as a model biomolecule, at different temperatures and system compositions. The binodal curves and liquid-liquid equilibrium data were determined by the addition of 5 wt% IL to investigate its effect on phase diagrams and Phe partition coefficients. The results indicate that binodal curves of systems with and without IL are more deviated from each other with decreasing temperature. Moreover, IL has a high tendency to partition into the PEG-rich phase. This tendency increases with increasing temperature and system compositions. For Phe, the partition coefficients obtained in this work (K_Phe ≈ 5.5-81.2) are significantly higher than those observed in other conventional PEG-inorganic salt ABS (K_Phe ≈ 0.5-2.5), water-immiscible ILs two-phase extraction systems (K_Phe ≈ 0.02-1.2), or even, in the IL-based ABS with the same IL as the main phase-forming component (K_Phe ≈ 3.2). The phase hydrophobicity, salting-out and π⋯π stacking seem to be the main driving forces to affect the extraction aptitude of the studied ABS for Phe. Furthermore, the performance of using [C₄ C₁ im]Br as adjuvant to improve the partition of Phe in the studied ABS at different temperatures seems to be ruled by the differences in the phases hydrophobicities. Finally, the experimental tie lines and partition coefficients are accurately correlated using the NRTL model. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018 © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1149-1166, 2018.

Quantification of amino acids and peptides in an ionic liquid based aqueous two-phase system by LC-MS analysis

Aqueous two-phase systems (ATPS) occur by the mixture of two polymers or a polymer and an inorganic salt in water. It was shown that not only polymers but also ionic liquids in combination with inorganic cosmotrophic salts are able to build ATPS. Suitable for the formation of ionic liquid-based ATPS systems are hydrophilic water miscible ionic liquids. To understand the driving force for amino acid and peptide distribution in IL-ATPS at different pH values, the ionic liquid Ammoeng 110™ and K₂HPO₄ have been chosen as a test system. To quantify the concentration of amino acids and peptides in the different phases, liquid chromatography and mass spectrometry (LC-MS) technologies were used. Therefore the peptides and amino acids have been processed with EZ:faast™-Kit from Phenomenex for an easy and reliable quantification method even in complex sample matrices. Partitioning is a surface-dependent phenomenon, investigations were focused on surface-related amino acid respectively peptide properties such as charge and hydrophobicity. Only a very low dependence between the amino acids or peptides hydrophobicity and the partition coefficient was found. Nevertheless, the presented results show that electrostatic respectively ionic interactions between the ionic liquid and the amino acids or peptides have a strong impact on their partitioning behavior.

Partitioning Behavior of Lysozyme and α-lactalbumin in Aqueous Two-Phase System Formed by Ionic Liquids and Potassium Phosphate

Nowadays ionic liquids (ILs), because of their “green” characteristics, have been used for analytical and separation processes. Therefore the partitioning of lysozyme and α-lactalbumin using aqueous two-phase systems (ATPSs) composed of an ionic liquid (chloride 1-ethyl-3-methylimidazolium) and inorganic salts (K2HPO4, KH2PO4) was studied. Phase equilibrium diagrams were obtained to explore the effect of the different temperatures (293.15, 303.15, 313.15, and 323.15) K and pH (7.5, 8.0, and 8.5) used for the partitioning studies. For both proteins, partition coefficients decreased with increasing temperature. The pH influenced the partition coefficients of lysozyme and α-lactalbumin. The thermodynamic parameters (ΔH◦, ΔS◦, ΔG◦) indicate thermodynamic differences between the partitioning of lysozyme and α-lactalbumin in this system. The ΔH◦, ΔS◦, and ΔG◦values of the process studied showed that this process is spontaneous. This work demonstrates the possible use of ATPSs with ILs and inorganic salts as a methodology for the partitioning of lysozyme and α-lactalbumin.

Separation and Enrichment of Lectin from Zihua Snap-Bean (Phaseolus vulgaris) Seeds by PEG 600-Ammonium Sulfate Aqueous Two-Phase System

A fast and efficient method based on a polyethylene glycol (PEG) 600/(NH₄)₂SO₄ aqueous two-phase system for extracting lectin from Zihua snap-bean (Phaseolus vulgaris) seeds was established. According to a Box-Behnken design (BBD), involving four factors at three levels each subjected to analysis of variance (ANOVA) and response surface analysis, the protein recovery and the purification factor of lectin in the top phase were used as the response values of the variance analysis to acquire the multivariate quadratic regression model. SDS-PAGE electrophoresis and the hemagglutination test were used to detect the distribution of lectin in the aqueous two-phase system (ATPS). The obtained data indicated that lectin was preferentially partitioned into the PEG-rich phase, and the ATPS, composed of 15% (NH₄)₂SO₄ (w/w), 18% PEG 600 (w/w), 0.4 g/5 g NaCl and 1 mL crude extract, showed good selectivity for lectin when the pH value was 7.5. Under the optimal conditions, most of the lectin was assigned to the top phase in the ATPS, and the hemagglutination activity of the purified lectin in the top phase was 3.08 times that of the crude extract. Consequently, the PEG 600/(NH₄)₂SO₄ aqueous two-phase system was an effective method for separating and enriching lectin directly from the crude extract of Zihua snap-bean seeds.

Good's Buffer Ionic Liquids as Relevant Phase-Forming Components of Self-Buffered Aqueous Biphasic Systems

A series of new self-buffering ionic liquids (ILs) based on Good's buffers (GBs) anions and the tetrabutylphosphonium cation ([P₄₄₄₄]⁺) was here synthesized and characterized. The self-buffering behaviour of the GB-ILs was confirmed by measuring their protonation constants by potentiometry. Further, their ability to form aqueous biphasic systems with the biodegradable potassium citrate salt was evaluated, and further investigated for the extraction of proteins, using bovine serum albumin (BSA) as a model protein. If these ionic structures display self-buffering characteristics as well as a low toxicity towards the luminescent bacteria Vibrio fischeri, they were additionally found to be highly effective in the formation of ABS and in the extraction of BSA - extraction efficiencies of 100% to the IL-rich phase obtained in a single-step. The BSA secondary structure in the aqueous IL-rich solutions was evaluated through infrared spectroscopic studies revealing the protein-friendly nature of the synthesized ILs. Dynamic light scattering (DLS), "COnductor-like Screening MOdel for Real Solvents" (COSMO-RS), and molecular docking studies were finally carried out to better understand the main driving forces of the extraction process. The results suggest that van der Waals and hydrogen-bonding interactions are important driving forces of the protein migration towards the GB-IL-rich phase, while the molecular docking investigations demonstrated a stabilizing effect of the studied ILs over the protein.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.