Subcritical water and dilute acid pretreatments for bioethanol production from Melaleuca leucadendron shedding bark

Zirconium based metal-organic framework in-situ assisted hydrothermal pretreatment and enzymatic hydrolysis of Platanus X acerifolia exfoliating bark for bioethanol production

Metal-organic framework (MOF) assisted hydrothermal pretreatment and co-catalysis strategy based on UiO-66 MOF is developed for the first time. The Planetree exfoliating bark was pretreated with or without UiO-66 assisted hydrothermal method at a temperature ranging from 160 to 240 °C for 1-3 h residence. With the rise of pretreatment severity, the total reducing sugar (TRS) was increased till reached maximum, 180 mg g^-1, in the presence of UiO-66. The fitting models validate the optimal hydrothermal condition was at 180 °C and 1 h, which was characterized with high TRS and very low yield of furfural and HMF. The TRS from enzymatic hydrolysis reaches maximum, 391 mg g^-1, in the presence of MOF co-catalysis and the maximum ethanol yield achieved was 73%. Altered morphology, higher surface area and porosity are noticed after MOF assisted hydrothermal pretreatment. This study insights the MOFs' application in lignocellulose biomass processing.

Hydrolysis of cellulose using cellulase physically immobilized on highly stable zirconium based metal-organic frameworks

Developing a new cellulase-MOF composite system with enhanced stability and reusability for cellulose hydrolysis was aimed. Physical adsorption strategy was employed to fabricate two cellulase composites, and the activity of composite was characterized by hydrolysis of carboxymethyl cellulose. The NH₂ functionalized UiO-66-NH₂ MOF exhibited higher protein loading than the precursor UiO-66, due to the extra anchor sites of NH₂ groups. The immobilized cellulase showed enhanced thermostability, pH tolerance and lifetime. The maximum activity attained at 55 °C could be kept 85% when used at 80 °C, and the residual activities were 72% after ten cycles and 65% after 30 days storage. The abundant NH₂ and COOH groups of MOF adsorb cellulase and enhance its stability, and the resulted heterogeneity offered the opportunity of recovering composite via mild centrifuge. The findings suggest the promising future of developing cellulase-MOF composite with ultrahigh activities and stabilities for practical application.

In-Situ Vacuum Assisted Gas Stripping Recovery System for Ethanol Removal from a Column Bioreactor

A three-step process consisting of biomass hydrolysis, fermentation and in-situ gas stripping by a vacuum assisted recovery system, was optimized to increase the ethanol production from sugar beet pulp. The process combines the advantages of stripping and vacuum separation and enhances the fermentation productivity through in-situ ethanol removal. Using the design of experiment and response surface methodology, the effect of major factors in the process, such as pressure, recycling ratio and solids concentration, was tested to efficiently remove ethanol after the combined hydrolysis and fermentation step. Statistical analysis indicates that a decreased pressure rate and an increased liquid phase recycling ratio enhance the productivity and the yield of the strip-vacuum fermentation process. The results also highlight further possibilities of this process to improve integrated bioethanol production processes. According to the statistical analysis, ethanol production is strongly influenced by recycling ratio and vacuum ratio. Mathematical models that were established for description of investigated processes can be used for the optimization of the ethanol production.

Acid-catalyzed autohydrolysis of wheat straw to improve sugar recovery

A comparison study of autohydrolysis and acid-catalyzed autohydrolysis of wheat straw was performed to understand the impact of acid addition on overall sugar recovery. Autohydrolysis combined with refining is capable of achieving sugar recoveries in the mid 70s. If the addition of a small amount of acid is capable of increasing the sugar recovery even higher it may be economically attractive. Acetic, sulfuric, hydrochloric and sulfurous acids were selected for acid-catalyzed autohydrolysis pretreatments. Autohydrolysis with no acid at 190 °C showed the highest total sugar in the prehydrolyzate. Enzymatic hydrolysis was performed for all the post-treated solids with and without refining at enzyme loadings of 4 and 10 FPU/g for 96 h. Acid-catalyzed autohydrolysis at 190 °C with sulfurous acid showed the highest total sugar recovery of 81.2% at 4 FPU/g enzyme charge compared with 64.3% at 190 °C autohydrolysis without acid.

Impact of pretreatments on morphology and enzymatic saccharification of shedding bark of Melaleuca leucadendron

The effects of subcritical water (SCW) and dilute acid pretreatments on the shedding bark of Melaleuca leucadendron (paper bark tree, PBT) biomass morphology, crystallinity index (CrI) and enzymatic saccharification were studied. The morphology of PBT bark was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. SCW pretreatment mainly extracted amorphous parts of the biomass hence its CrI increased, partial decrystallization of cellulose and exposing of intact nanofibers of cellulose were observed for SCW pretreatment at 180°C. On the other hand, dilute acid pretreatment at 160°C exhibited a large decrease in CrI, an increase in surface area, a decrease in lignin content and decrystallization of cellulose as well as the peel-off and degradation of some nanofiber bundles. Dilute acid and SCW pretreatments of PBT biomass resulted in about 4.5 fold enhancement in glucose release relative to the untreated one.