Efficient decolorization and detoxification of the sulfonated azo dye Reactive Orange 16 and simulated textile wastewater containing Reactive Orange 16 by the white-rot fungus Ganoderma sp. En3 isolated from the forest of Tzu-chin Mountain in China

Improved productivity and dye removal performance of Trametes versicolor pellets using rice husk as a co-substrate

Pellet production represents a critical step for several processes requiring fungal biomass, nevertheless, its optimization is seldom reported. The use of finely ground rice husk as a microcarrier and co-substrate permitted a marked increase (≈ 2.7×) in the productivity of fungal pellet production using Trametes versicolor compared to traditional production methods. The pellets show similar structure and smaller size compared to typical sole-mycelium pellets, as well as comparable laccase activity. The efficiency of the pellets for biodegradation was confirmed by the removal of the crystal violet dye, achieving significantly faster decolorization rates compared to the traditionally produced pellets. The use of these pellets during the continuous treatment of the dye in a stirred tank bioreactor resulted in 97% decolorization operating at a hydraulic residence time of 4.5 d.

Exploring fungal-mediated solutions and its molecular mechanistic insights for textile dye decolorization

Decolorization of textile dyes and study of their intermediate compounds is necessary to comprehend the mechanism of dye degradation. In the present study, different fungal mediated solutions were explored to provide an alternative to treat the reactive dyes. Growing biomass of Pleurotus sajor caju showed 83% decolorization (249.99 mg L-1 removal) of Reactive Blue 13 (RB 13) and 63% decolorization (188.83 mg L-1) of Reactive Black 5 (RB 5) at 300 mg L-1 initial concentration on 8 d. Higher laccase activity was positively correlated with increase in decolorization. However, increasing dye concentration has inhibitory effect on fungal biomass due to increase in toxicity. In laccase mediated decolorization, laccase produced from P. sajor caju using carbon rich waste material as substrate showed 89% decolorization (276.36 mg L-1 removal) of RB 13 and 33% decolorization (105.37 mg L-1 removal) of RB 5 at 300 mg L-1 initial dye concentration in 100 min at 30 °C and pH 3.0'. Comparing the two methods, laccase-mediated decolorization shows better decolorization in less time and does not produce sludge. Further, the present work also attempted to study the dye degradation pathway for Reactive blue 13 via laccase mediated process. Fourier-transform infrared spectroscopy (FTIR), high-performance liquid chromatography (HPLC), and gas chromatography-mass spectrometry (GC-MS) were utilized to identify the degraded products. The GC-MS analysis showed the formation of naphthalene, naphthalene 2-ol, benzene,1-2, dicarboxylic acid, 4, amino, 6,chloro, 1-3-5, triazin-2-ol as the final degraded products after enzymatic degradation of RB 13. These findings provide in-depth study of laccase-mediated textile dye degradation mechanism.

A review on simultaneous heavy metal removal and organo-contaminants degradation by potential microbes: Current findings and future outlook

Industrial processes result in the production of heavy metals, dyes, pesticides, polyaromatic hydrocarbons (PAHs), pharmaceuticals, micropollutants, and PFAS (per- and polyfluorinated substances). Heavy metals are currently a significant problem in drinking water and other natural water bodies, including soil, which has an adverse impact on the environment as a whole. The heavy metal is highly poisonous, carcinogenic, mutagenic, and teratogenic to humans as well as other animals. Multiple polluted sites, including terrestrial and aquatic ecosystems, have been observed to co-occur with heavy metals and organo-pollutants. Pesticides and heavy metals can be degraded and removed concurrently from various metals and pesticide-contaminated matrixes due to microbial processes that include a variety of bacteria, both aerobic and anaerobic, as well as fungi. Numerous studies have examined the removal of heavy metals and organic-pollutants from different types of systems, but none of them have addressed the removal of these co-occurring heavy metals and organic pollutants and the use of microbes to do so. Therefore, the main focus of this review is on the recent developments in the concurrent microbial degradation of organo-pollutants and heavy metal removal. The limitations related to the simultaneous removal and degradation of heavy metals and organo-pollutant pollutants have also been taken into account.

Potential of low-cost TiO2-PVC composite in photoelectrocatalytic degradation of reactive orange 16 under visible light

In recent years, previously reported studies revealed a high efficiency of pollutant degradation by coupling photocatalysis and electrochemical processes (PECs) using titanium dioxide (TiO₂) photoelectrode rather than using photocatalysis or electrocatalysis alone. However, some of the TiO₂ photoelectrodes that have been reported were not cost-effective. This is due to the use of expensive chemicals and certain expensive equipment in the fabrication process, other than involving complicated preparation steps. Therefore, this study is aimed at investigating the PEC performance and stability of low-cost TiO₂-polyvinyl chloride (TiO₂-PVC) composite photoelectrode for Reactive Orange 16 (RO16) degradation. The materials characterisation using the ATR-FTIR, XRD and UV-Vis DRS proved that TiO₂ and TiO₂-PVC were successfully synthesised. The micrograph obtained for the surface characterisation using the FESEM showed that the smooth surface of freshly prepared photoelectrodes turned slightly rough with tiny pits formation after five continuous PEC processes. Nevertheless, the photoelectrode retained its original shape in good condition for further PEC processes. By PEC process, the fabricated photoelectrode showed 99.4% and 51.1% of colour and total organic carbon (TOC) removal, respectively, at optimised PEC parameters (1.0 mol L^-1 NaCl concentration, 10 V applied voltage, 120 min degradation time and initial pH 2). Moreover, the fabricated photoelectrode demonstrated sufficient reusability potential (~ 96.3%) after five cycles of PEC processes. In summary, a low-cost and stable composite photoelectrode with high efficiency in RO16 degradation was successfully fabricated and could be potentially applied for other emerging pollutants degradation via the PEC degradation technique.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Optimization of mycoremediation treatment for the chemical oxygen demand (COD) and ammonia nitrogen (AN) removal from domestic effluent using wild-Serbian Ganoderma lucidum (WSGL)

The fungi-based technology, wild-Serbian Ganoderma lucidum (WSGL) as myco-alternative to existing conventional microbial-based wastewater treatment is introduced in this study as a potential alternative treatment. The mycoremediation is highly persistent for its capability to oxidatively breakdown pollutant substrates and widely researched for its medicinal properties. Utilizing the nonhazardous properties and high degradation performance of WSGL, this research aims to optimize mycoremediation treatment design for chemical oxygen demand (COD) and ammonia nitrogen (AN) removal in domestic wastewater based on proposed Model 1 (temperature and treatment time) and Model 2 (volume of pellet and treatment time) via response surface methodology (RSM). Combined process variables were temperature (0C) (Model 1) and the volume of mycelial pellets (%) (Model 2) against treatment time (hour). Response variables for these two sets of central composite design (CCD) were the removal efficiencies of COD (%) and AN (%). The regression line fitted well with the data with R2 values of 0.9840 (Model 1-COD), 0.9477 (Model 1-AN), 0.9988 (Model 2-COD), and 0.9990 (Model 2-AN). The lack of fit test gives the highest value of sum of squares equal to 9494.91 (Model 1-COD), 9701.68 (Model 1-AN), 23786.55 (Model 2-COD), and 13357.02 (Model 2-AN), with probability F values less than 0.05 showing significant models. The optimized temperature for Model 1 was at 25 °C within 24 h of treatment time with 95.1% COD and 96.3% AN removals. The optimized condition (temperature) in Model 1 was further studied in Model 2. The optimized volume of pellet for Model 2 was 0.25% in 24-h treatment time with 76.0% COD and 78.4% AN removals. Overall, the ascended sequence of high volume of pellet considered in Model 2 will slow down the degradation process. The best fit volume of pellet with maximum degradation of COD and AN is equivalent to 0.1% at 25 °C in 24 h. The high performance achieved demonstrates that the mycoremediation of G. lucidum is highly potential as part of the wastewater treatment system in treating domestic wastewater of high organic loadings.

Impacts of holmium and lithium to the growth of selected basidiomycetous fungi and their ability to degrade textile dyes

The impacts of Ho and Li (0, 10, 50, 200 mg/L) were tested towards the growth of four basidiomycetous fungal species, their ability to decolorise synthetic dyes (Reactive Green 19, Reactive Orange 16, Reactive Black 5), and produce oxidative enzymes. All species; Agrocybe dura, Skeletocutis biguttulata, Exidia saccharina and Galerina paludosa; grew with and without supplemented Ho or Li. The growth of S. biguttulata was the most tolerant species towards Ho or Li (200 mg/L), whereas the growth of G. paludosa was the most sensitive of the studied species to both 200 mg Ho or Li/L. All fungi oxidized ABTS [2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)] forming colour zone on plate tests indicating production of lignin modifying laccase enzyme. A. dura and G. paludosa, formed black MnO₂ zone in Mn²⁺ plates, which indicates the production of manganese peroxidase (MnP). A. dura and G. paludosa decolorised Reactive Black 5 indicating the production of versatile peroxide (VP) enzyme. Our study presents two new candidate species able to produce VP. A. dura was capable of decolorising all tested synthetic dyes in the presence of Ho or Li (0-200 mg/L) suggesting that this fungus is a promising species for bioremediation of multi dye-containing wastes.

A study on the utility of immobilized cells of indigenous bacteria for biodegradation of reactive azo dyes

Azo dyes are recalcitrant compounds used as a colorant in various industries. The pollution caused by their extensive usage has adversely affected the environment for years. The existing physicochemical methods for dye pollution remediation are rather inefficient and hence there is a dearth of low-cost, potential systems capable of dye degradation. The current research studies the biodegradation potential of immobilized bacterial cells against azo dyes Reactive Orange 16 (RO-16) and Reactive Blue 250 (RB-250). Two indigenous dye degrading bacteria Bacillus sp. VITAKB20 and Lysinibacillus sp. KPB6 was isolated from textile sludge sample. Free cells of Bacillus. sp. VITAKB20 degraded 92.38% of RO-16 and that of Lysinibacillus sp. KPB6 degraded 95.36% of RB-250 within 72 h under static conditions. Upon immobilization with calcium alginate, dye degradation occurred rapidly. Bacillus. sp. VITAKB20 degraded 97.5% of RO-16 and Lysinibacillus sp. KPB6 degraded 98.2% of RB-250 within 48 h under shaking conditions. Further, the nature of dye decolorization was biodegradation as evident by high-performance liquid chromatography (HPLC), and Fourier-transform infrared spectroscopy (FTIR) results. Phytotoxicity and biotoxicity assays revealed that the degraded dye products were less toxic in nature than the pure dyes. Thus, immobilization proved to be a highly likely alternative treatment for dye removal.

Study of simultaneous bioremediation of mixed reactive dyes and Cr(VI) containing wastewater through designed experiments

Xenobiotic azo dyes and chromate (Cr(VI)) containing industrial wastewaters cause severe ecological problems. The present bioremediation study aims to treat wastewater containing Cr(VI) ions and mixed azo dyes (reactive red 21 (RR21) and reactive orange 16 (RO16)) by Pseudomonas aeruginosa 23N1. The process optimization of bioremediation is investigated using statistical designed experimental tool of response surface methodology. The ANOVA analysis is performed to evaluate optimal biodecolourization condition. This study shows that the amount of yeast extract has major influence on biodecolourization performance. The decolourization of individual RO16 and RR21 dye in presence of 60 mg/L of Cr(VI) ions is obtained as 88.5 ± 0.8 and 92.3 ± 0.7% for 100 and 150 mg/L initial dye concentrations, respectively. In this study, bacteria exhibit high Cr(VI) removal potential of ~ 99.1% against initial Cr(VI) concentration of 150 mg/L. The negative influence of Cr(VI) ions on biodecolourization is only noticed when initial Cr(VI) concentration in wastewater is found above 150 mg/L. The results reveal that bacteria studied here could be used to biodecolourize dyes even in high saline condition (> 6000 mg/L). The reduction of ~ 80% in American Dye Manufacturers Institute colour index value is achieved for mixed dyes solution containing 50 mg/L of both RR21 and RO16 dyes along with 50 mg/L Cr(VI) ions. Significant changes in the UV-visible and ATR-FTIR spectra are observed in treated water that confirms the biodegradation of dyes. Toxicity study with Vigna radiata reveals the non-toxicity of degraded metabolites and strain 23N1 is recommended as an effective bioremediation agent.

Determination of the color removal efficiency of laccase enzyme depending on dye class and chromophore

The aim of this article was to clarify which type of dye chromophores could be decolorized efficiently with the use of laccase enzyme. For this purpose, enzymatic degradation of different type of dye classes (4 reactive, 2 acid and 1 basic dye) having various chromophore groups was investigated by using commercial laccase from Cerrena unicolor. It was observed that the chromophore structure of dye is very important on enzymatic color removal efficiency. According to the experimental results, it was found that color removal efficiencies (20 mg/L initial dye) were 98.7% for RB220 (0.1 g/L enzyme after 6 h), 95.1% for RB19 (0.1 g/L enzyme after 48 h), 90.8% for AR42 (0.1 g/L enzyme after 48 h) while they were 60.9% for AR114 (0.25 g/L enzyme), 58.6% for RB21 (0.5 g/L enzyme), 39.7% for RR239 (0.25 g/L enzyme) even after seven days. As a result, it can be said that the highest decolorization rate was achieved for the reactive dye having formazan copper complex (RB220) chromophore. On the other hand, the enzymatic degradation of basic dye (BB9) was found to be rather difficult compared to the acid and reactive dyes used in this study and the maximum color removal was 42.8% after seven days.

Decolorization and detoxification of water-insoluble Sudan dye by Shewanella putrefaciens CN32 co-cultured with Bacillus circulans BWL1061

Effluents loaded with various synthetic dyes are considered as a huge burden to the surrounding ecosystems. Sudan dyes are relatively difficult to decolorize due to its water-insolubility. In the present study, the strain Shewanella putrefaciens CN32 was firstly applied to decolorize Sudan dyes under the anaerobic condition, and the physicochemical parameters on the decolorization were optimized. The results demonstrated that the suitable decolorization condition was temperature 26 °C, initial pH 7.0-8.0 and NaCl concentrations 0-20 g/L. Electron competitive acceptors including nitrite, nitrate, dimethyl sulphoxide and oxygen could cause the significant inhibition to the decolorization of Sudan dyes. Biosurfactant rhamnolipid played a positive role in enhancing the decolorization of Sudan I. The co-culture of S. putrefaciens CN32 and Bacillus circulans BWL1061 is reported for the first time to accelerate the decolorization through improving the synergistic effect of enzymatic degradation and biological reductive effect. The highest decolorization of 90.23% to Sudan I was achieved within 108 h, suggesting that co-culture technique has a good potential in the treatment of dyeing wastewater. Furthermore, the microbial toxicity tests indicated that the toxicity of Sudan I to Escherichia coli BL21 and Bacillus subtilis 168 was obviously decreased after the decolorization.

Process optimization for effective bio-decolourization of reactive orange 16 using chemometric methods

Azo group containing reactive dyes are most commonly used in textile and tannery industries due to its bright appearance and stable color. This study aims to investigate the decolourization of reactive orange 16 (RO16) dye by Pseudomonas aeruginosa 23N1 along with removal of chromate (Cr(VI)) and evaluation of optimal process condition. The regular two-level factorial design is used to screen out operational parameters and selects their levels for further optimization process through central composite design (CCD) based response surface methodology (RSM). The result revealed that glucose and peptone have a negative effect on the performance of dye decolourization. Bacteria exhibit high decolourization potential in yeast extract supplemented culture medium with no addition of external carbon sources. The percentages of decolourization obtained in model validated experiments are obtained as 95.0 ± 0.4% and 95.1 ± 0.5% for initial dye 50 mg/L and 150 mg/L, respectively, which exhibit satisfactory correlation with model predicted response. The simultaneous dye and Cr(VI) removal has been explored in this study. The decolourization of dye is only affected due to presence of high Cr(VI) concentration (>120 mg/L). Bacteria have shown satisfactorily decolourization for RO16 contaminated industrial wastewater. The strain 23N1 could be a good biological agent for decolourization of RO16 dye.

Optimization and mechanisms for biodecoloration of a mixture of dyes by Trichosporon akiyoshidainum HP 2023

Trichosporon akiyoshidainum HP2023 is a basidiomycetous yeast isolated from Las Yungas rainforest (Tucumán, Argentina) and selected based on its outstanding textile-dye-decolorizing ability. In this work, the decolorization process was optimized using Reactive Black 5 as dye model. Lactose and urea were chosen as carbon and nitrogen sources through a one-at-time approach. Afterwards, factorial designs were employed for medium optimization, leading to the formulation of a simpler optimized medium which contains in g L^-1: lactose 10, yeast extract 1, urea 0.5, KH₂PO₄ 1 and MgSO₄ 1. Temperature and agitation conditions were also optimized. The optimized medium and incubation conditions for dye removal were extrapolated to other dyes individually and a mixture of them. Dye removal process happened through both biosorption and biodegradation mechanisms, depending primarily on the dye structure. A positive relation between initial inoculum and dye removal rate and a negative relation between initial dye concentration and final dye removal percentages were found. Under optimized conditions, T. akiyoshidainum HP2023 was able to completely remove a mixture of dyes up to a concentration of 300 mg L^-1, a concentration much higher than those expected in real effluents.

Characterization of a manganese peroxidase from white-rot fungus Trametes sp.48424 with strong ability of degrading different types of dyes and polycyclic aromatic hydrocarbons

Manganese peroxidase, MnP-Tra-48424, was purified and characterized from the white-rot fungus Trametes sp.48424. MnP-Tra-48424 was strongly resistant to metal ions such as Ni²⁺, Li⁺, Ca²⁺, K⁺, Mn²⁺. MnP-Tra-48424 was also resistant to organic solvents such as propanediol, glycerol, and glycol. MnP-Tra-48424 decolorized dyes (indigo, anthraquinone, azo and triphenylmethane) and degraded different polycyclic aromatic hydrocarbons (PAHs). Indigo Carmine, Remazol Brilliant Blue R, Remazol Brilliant Violet 5R and Methyl Green were efficiently decolorized by MnP-Tra-48424. MnP-Tra-48424 also decolorized Indigo Carmine and Methyl Green combined with metal ions and organic solvents. The decolorization capability of MnP-Tra-48424 was not inhibited by selected metal ions and organic solvents. A combination of MnP-Tra-48424 and Lac-Tra-48424 improved the decolorization rate. In addition to dyes, MnP-Tra-48424 was effective at degrading individual PAHs (fluorene, fluoranthene, pyrene, phenanthrene, anthracene) and also PAHs in mixtures.

Evaluation of cellobiose dehydrogenase and laccase containing culture fluids of Termitomyces sp. OE147 for degradation of Reactive blue 21

•

Use of culture filtrates of Termitomyces sp. OE147.

•

Decolourization and degradation of Reactive blue 21.

•

Cellobiose dehydrogenase and laccase as effective redox couple.

This study evaluates culture filtrate, rich in cellobiose dehydrogenase and laccases, of Termitomyces sp. OE 147, in decolouration and degradation of Reactive blue (RB) 21. About 35% decolouration was achieved at low volumes of the culture supernatant without addition of external redox mediators. An optimized dye to culture fluid ratio (75 ppm: 0.1 ml) at a pH of 4–5 resulted in removal of colour by 60%. The degradation products of RB21 were analysed by Electron Spray Ionization-Mass Spectrometry and several small molecules (of m/z 106–199) were detected. These were concluded to be o-Xylene, 2,3-Dihydro-1H-isoindole, Isoindole-1,3-dione, 2,Benzenesulfonyl-ethanol, (4-Hydroxy-phenyl)-sulfamic acid, 2,3-Dihydro-1H-isoindole-5-sulfonic acid and proposed to result from joint action of cellobiose dehydrogenase, laccase, peroxidases and unidentified oxidoreductases present in the culture fluids. Based on the products formed and the known reactions of these enzymes, a degradation pathway was proposed for RB21. The culture fluid was also effective in decolouration (by about 50%) and detoxification (by ∼25%) of the combined effluent collected from a local mill indicating a treatment process that bypasses use of H₂O₂ and toxic mediators.

Diverse Metabolic Capacities of Fungi for Bioremediation

Bioremediation refers to cost-effective and environment-friendly method for converting the toxic, recalcitrant pollutants into environmentally benign products through the action of various biological treatments. Fungi play a major role in bioremediation owing to their robust morphology and diverse metabolic capacity. The review focuses on different fungal groups from a variety of habitats with their role in bioremediation of different toxic and recalcitrant compounds; persistent organic pollutants, textile dyes, effluents from textile, bleached kraft pulp, leather tanning industries, petroleum, polyaromatic hydrocarbons, pharmaceuticals and personal care products, and pesticides. Bioremediation of toxic organics by fungi is the most sustainable and green route for cleanup of contaminated sites and we discuss the multiple modes employed by fungi for detoxification of different toxic and recalcitrant compounds including prominent fungal enzymes viz., catalases, laccases, peroxidases and cyrochrome P450 monooxygeneses. We have also discussed the recent advances in enzyme engineering and genomics and research being carried out to trace the less understood bioremediation pathways.

High Laccase Expression by Trametes versicolor in a Simulated Textile Effluent with Different Carbon Sources and PHs

Textile effluents are highly polluting and have variable and complex compositions. They can be extremely complex, with high salt concentrations and alkaline pHs. A fixed-bed bioreactor was used in the present study to simulate a textile effluent treatment, where the white-rot fungus, Trametes versicolor, efficiently decolourised the azo dye Reactive Black 5 over 28 days. This occurred under high alkaline conditions, which is unusual, but advantageous, for successful decolourisation processes. Active dye decolourisation was maintained by operation in continuous culture. Colour was eliminated during the course of operation and maximum laccase (Lcc) activity (80.2 U∙L⁻¹) was detected after glycerol addition to the bioreactor. Lcc2 gene expression was evaluated with different carbon sources and pH values based on reverse transcriptase-PCR (polymerase chain reaction). Glycerol was shown to promote the highest lcc2 expression at pH 5.5, followed by sucrose and then glucose. The highest levels of expression occurred between three and four days, which corroborate the maximum Lcc activity observed for sucrose and glycerol on the bioreactor. These results give new insights into the use of T. versicolor in textile dye wastewater treatment with high pHs.

Phylogenetic and metabolic diversity of Tunisian forest wood-degrading fungi: a wealth of novelties and opportunities for biotechnology

In this study, 51 fungal strains were isolated from decaying wood samples collected from forests located in the Northwest of Tunisia in the vicinity of Bousalem, Ain Draham and Kef. Phylogenetic analysis based on the sequences of the internal transcribed spacers of the ribosomal DNA showed a high diversity among the 51 fungal isolates collection. Representatives of 25 genera and 29 species were identified, most of which were members of one of the following phyla (Ascomycota, Basidiomycota and Zygomycota). In addition to the phylogenetic diversity, a high diversity of secreted enzyme profiles was also detected among the fungal isolates. All fungal strains produced at least one of the following enzymes: laccase, cellulase, protease and/or lipase.

Biodecolorization of recalcitrant dye as the sole sourceof nutrition using Curvularia clavata NZ2 and decolorization ability of its crude enzymes

Extensive use of recalcitrant azo dyes in textile and paper industries poses a direct threat to the environment due to the carcinogenicity of their degradation products. The aim of this study was to investigate the efficiency of Curvularia clavata NZ2 in decolorization of azo dyes. The ability of the fungus to decolorize azo dyes can be evaluated as an important outcome as existing effluent treatment is unable to remove the dyes effectively. C. clavata has the ability to decolorize Reactive Black 5 (RB5), Acid Orange 7 (AO7), and Congo Red azo dyes, utilizing these as sole sources of carbon and nitrogen. Ultraviolet-visible (UV-vis) spectroscopy and Fourier infrared spectroscopy (FTIR) analysis of the extracted RB5's metabolites along with desorption tests confirmed that the decolorization process occurred due to degradation and not merely by adsorption. Enzyme activities of extracellular enzymes such as carboxymethylcellulase (CMCase), xylanase, laccase, and manganese peroxidase (MnP) were also detected during the decolorization process. Toxicity expressed as inhibition of germination was reduced significantly in fungal-treated azo dye solution when compared with the control. The cultivation of C. clavata under sequential batch system also recorded a decolorization efficiency of above 90%. The crude enzyme secreted by C. clavata also showed excellent ability to decolorize RB5 solutions with concentrations of 100 ppm (88-92%) and 1000 ppm (70-77%) without redox mediator. This proved that extracellular enzymes produced by C. clavata played a major role in decolorization of RB5.

Low-Cost Biodegradation and Detoxification of Textile Azo Dye C.I. Reactive Blue 172 byProvidencia rettgeriStrain HSL1

Present study focuses on exploitation of agricultural waste wheat bran (WB) as growth medium for degradation of textile azo dye C.I. Reactive Blue 172 (RB 172) using a single bacteriumP. rettgeristrain HSL1 (GenBank accession numberJX853768.1). The bacterium was found to completely decolorize 50 mg L−1of dye RB 172 within 20 h at 30 ± 0.2°C under microaerophilic incubation conditions. Additionally, significant reduction in COD (85%) and TOC (52%) contents of dye decolorized medium was observed which suggested its mineralization. Induction in the activities of azoreductase (159%) and NADH-DCIP reductase (88%) provided an evidence for reductive cleavage of dye RB 172. The HPLC, FTIR, and GC-MS analysis of decolorized products confirmed the degradation of dye into various metabolites. The proposed metabolic pathway for biodegradation of RB 172 has been elucidated which showed the formation of 2 intermediate metabolites, namely, 4-(ethenylsulfonyl) aniline and 1-amino-1-(4-aminophenyl) propan-2-one. The acute and phytotoxicity evaluation of degraded metabolites suggests that bacterial strain favors the detoxification of dye RB 172. Thus, WB could be utilized as a low-cost growth medium for the enrichment of bacteria and their further use for biodegradation of azo dyes and its derivatives containing wastes into nontoxic form.

Induction, purification and characterization of a novel manganese peroxidase from Irpex lacteus CD2 and its application in the decolorization of different types of dye

Manganese peroxidase (MnP) is the one of the important ligninolytic enzymes produced by lignin-degrading fungi which has the great application value in the field of environmental biotechnology. Searching for new MnP with stronger tolerance to metal ions and organic solvents is important for the maximization of potential of MnP in the biodegradation of recalcitrant xenobiotics. In this study, it was found that oxalic acid, veratryl alcohol and 2,6-Dimehoxyphenol could stimulate the synthesis of MnP in the white-rot fungus Irpex lacteus CD2. A novel manganese peroxidase named as CD2-MnP was purified and characterized from this fungus. CD2-MnP had a strong capability for tolerating different metal ions such as Ca2+, Cd2+, Co2+, Mg2+, Ni2+ and Zn2+ as well as organic solvents such as methanol, ethanol, DMSO, ethylene glycol, isopropyl alcohol, butanediol and glycerin. The different types of dyes including the azo dye (Remazol Brilliant Violet 5R, Direct Red 5B), anthraquinone dye (Remazol Brilliant Blue R), indigo dye (Indigo Carmine) and triphenylmethane dye (Methyl Green) as well as simulated textile wastewater could be efficiently decolorized by CD2-MnP. CD2-MnP also had a strong ability of decolorizing different dyes with the coexistence of metal ions and organic solvents. In summary, CD2-MnP from Irpex lacteus CD2 could effectively degrade a broad range of synthetic dyes and exhibit a great potential for environmental biotechnology.

Conducting polypyrrole films as a potential tool for electrochemical treatment of azo dyes in textile wastewaters

In this paper, we demonstrate conducting polypyrrole films as a potential green technology for electrochemical treatment of azo dyes in wastewaters using Acid Red 1 as a model analyte. These films were synthesised by anodically polymerising pyrrole in the presence of Acid Red 1 as a supporting electrolyte. In this way, the anionic Acid Red 1 is electrostatically attracted to the cationic polypyrrole backbone formed to maintain electroneutrality, and is thus entrapped in the film. These Acid Red 1-entrapped polypyrrole films were characterised by electrochemical, microscopic and spectroscopic techniques. Based on a two-level factorial design, the solution pH, Acid Red 1 concentration and polymerisation duration were identified as significant parameters affecting the entrapment efficiency. The entrapment process will potentially aid in decolourising Acid Red 1-containing wastewaters. Similarly, in a cathodic process, electrons are supplied to neutralise the polypyrrole backbone, liberating Acid Red 1 into a solution. In this work, following an entrapment duration of 480 min in 2000 mg L(-1) Acid Red 1, we estimated 21% of the dye was liberated after a reduction period of 240 min. This allows the recovery of Acid Red 1 for recycling purposes. A distinctive advantage of this electrochemical Acid Red 1 treatment, compared to many other techniques, is that no known toxic by-products are generated in the treatment. Therefore, conducting polypyrrole films can potentially be applied as an environmentally friendly treatment method for textile effluents.