Degradation performance and microbial community analysis of microbial electrolysis cells for erythromycin wastewater treatment

Elucidating applied voltage on the fate of antibiotic resistance genes in microbial electrolysis cell: Focusing on its transmission between anolyte and biofilm microbes

Microbial electrolysis cell (MEC) system to treat wastewater containing antibiotics has been researched actively in past years. However, the fate of antibiotic resistant genes (ARGs) in MEC is not fully revealed. The effect of applied voltage on the migration of ARGs between anolyte and biofilm microbes via examining the microbial physiology and abundances of macrolide resistance genes (MRGs) and mobile genetic elements (MGEs) was elucidated in this research. Results showed that the abundance of MRGs and MGEs was decreased in the anolyte, but their abundances were increased on the electrode biofilm, indicating their transmission from anolyte to biofilm microbes. Increased applied voltage enhanced adenosine triphosphate (ATP), reactive oxygen species (ROS), and cell membrane permeability of electrode microorganisms. The structure of the electrode microbial community was shifted through applied voltage, and the abundance of electroactive microorganisms (Geobacter, Azospirillum and Dechlorobacter) was significantly improved. Network analysis revealed that Geobacter and Geothrix were potential hosts for MRGs. Therefore, the horizontal and vertical gene transfer of ARGs could be increased by the applied voltage, leading to the enriched ARGs at the electrode biofilm. This study provides evidence and insights into the transmission of ARGs between anolyte and biofilm microbes in MEC system. SYNOPSIS: This study revealed the effect of applied voltage on ARGs in MEC and the potential migration mechanism of ARGs.

Deciphering the Role of WWTPs in Cold Environments as Hotspots for the Dissemination of Antibiotic Resistance Genes

Cold environments are the most widespread extreme habitats in the world. However, the role of wastewater treatment plants (WWTPs) in the cryosphere as hotspots in antibiotic resistance dissemination has not been well established. Hence, a snapshot of the resistomes of WWTPs in cold environments, below 5 °C, was provided to elucidate their role in disseminating antibiotic resistance genes (ARGs) to the receiving waterbodies. The resistomes of two natural environments from the cold biosphere were also determined. Quantitative PCR analysis of the aadA, aadB, ampC, blaSHV, blaTEM, dfrA1, ermB, fosA, mecA, qnrS, and tetA(A) genes indicated strong prevalences of these genetic determinants in the selected environments, except for the mecA gene, which was not found in any of the samples. Notably, high abundances of the aadA, ermB, and tetA(A) genes were found in the influents and activated sludge, highlighting that WWTPs of the cryosphere are critical hotspots for disseminating ARGs, potentially worsening the resistance of bacteria to some of the most commonly prescribed antibiotics. Besides, the samples from non-disturbed cold environments had large quantities of ARGs, although their ARG profiles were highly dissimilar. Hence, the high prevalences of ARGs lend support to the fact that antibiotic resistance is a common issue worldwide, including environmentally fragile cold ecosystems.

Enhanced biodegradation of fluoroquinolones and the changes of bacterial communities and antibiotic-resistant genes under intermittent electrical stimulation

In this study, an anaerobic-aerobic coupling system under intermittent electrical stimulation was used to improve the biodegradation of synthetic wastewater containing fluoroquinolones (FQs). The effect of electrical stimulation on FQ removal performance is more pronounced with appropriate voltage and hydraulic retention time. In addition, the combination of anaerobic-anodic and aerobic-cathodic chambers is more conducive to improving the removal efficiency of FQs. Under 0.9 V, the removal efficiencies of ofloxacin, norfloxacin, ciprofloxacin, and enrofloxacin were significantly improved in the anaerobic-anodic and aerobic-cathodic system. The contribution of the anaerobic/aerobic anodic chambers to FQ removal was greater than that of the anaerobic/aerobic cathodic chambers. Electrical stimulation selectively enriched electroactive bacteria related to biodegradation (Desulfovibrio and Terrimonas), antibiotic-resistant bacteria (Atopobium and Neochlamydia), and nitrifying bacteria (SM1A02 and Reyranella). This study indicated the potential effectiveness of intermittent electrical stimulation in treating fluoroquinolone-containing wastewater in a biofilm reactor. However, electrical stimulation led to an increase in mobile genetic elements , induced horizontal gene transfer and enriched resistant bacteria, which accelerated the spread of antibiotic-resistant genes (ARGs) in the system, indicating that the diffusion of ARGs remains a challenge.

Effect of erythromycin on epiphytic bacterial communities and water quality in wetlands

The occurrence of antibiotics such as erythromycin (ERY) under macrolide group, has long been acknowledged for negatively affecting ecosystems in freshwater environments. However, the effects of ERY on water quality and microbial communities in epiphytic biofilms are poorly understood. Here, Scanning Electron Microscopy (SEM), High-throughput sequencing, and physicochemical analytical methods were employed to unravel the impact of ERY on the water quality and bacterial morphology, biodiversity, composition, interaction, and ecological function in epiphytic biofilms attached to Vallisneria natans and artificial plants in mesocosmic wetlands. The study showed that ERY exposure significantly impaired the nutrient removal capacity (TN, TP, and COD) and altered the epiphytic bacterial morphology of V. natans and artificial plants. ERY did not affect the bacterial α-diversity. Notwithstanding ERY decreased the bacterial composition, but the relative abundance of Proteobacteria and Patescibacteria spiked by 62.2 % and 54 %, respectively, in V. natans, while Desulfobacteria and Chloroflexi increased by 8.9 % and 11.2 %, respectively, in artificial plants. Notably, ERY disturbed the food web structure and metabolic pathways such as carbohydrate metabolism, amino acid metabolism, energy metabolism, cofactor and vitamin metabolism, membrane transport, and signal transduction. This study revealed that ERY exposure disrupted the bacterial morphology, composition, interaction or food web structure, and metabolic functions in epiphytic biofilm. These data underlined that ERY negatively impacts epiphytic bacterial communities and nutrient removal in wetlands.

Binder-free NiO/MnO2 coated carbon based anodes for simultaneous norfloxacin removal, wastewater treatment and power generation in dual-chamber microbial fuel cell

Norfloxacin (NFX) is a commonly consumed synthetic antibiotic drug to cure many adverse infectious diseases of humans worldwide, but their presence in almost all aquatic environments has grown into severe global health concerns. In this study, the power performance of dual-chamber microbial fuel cells (MFCs) with two different types of base anodes (graphite felt and activated carbon cloth) were tested with a coating of NiO/MnO₂ for removal of NFX in wastewater. As transition metal oxides have excellent electrochemical stability and a higher specific capacitance, their application in MFC for antibiotic removal and wastewater treatment would be an interesting study. Four different NFX concentrations were studied in two different base material with a coating of NiO/MnO₂. Coating was done with 2 step hydro solvothermal method and modified anode surface was characterized by XRD and XPS analyses. Extracellular electron transfer between microorganisms and the modified anode improved significantly as a consequence of reduced internal resistance and a more biocompatible surface as measured by Electroscopy Impedance Spectroscopy (EIS) and polarization curves. NiO/MnO₂ coated graphite felt performed 1.2 fold better than the control plain graphite felt. Similar results were found for activated carbon cloth (ACC). Modified ACC performed 1.3 fold better than the control plain ACC.

Erythromycin Scavenging from Aqueous Solutions by Zeolitic Materials Derived from Fly Ash

Erythromycin (EA) is an antibiotic whose concentration in water and wastewater has been reported to be above the standard levels. Since the methods used so far to remove EA from aquatic environments have not been effective, the development of effective methods for EA removal is necessary. In the present study, fly ash (FA)-based zeolite materials, which have not been investigated as EA sorbents before, were used. The possibilities of managing waste FA and using its transformation products for EA sorption were presented. The efficiency of EA removal from experimental solutions and real wastewater was evaluated. In addition, the sorbents' mineral composition, chemical composition, and physicochemical properties and the effects of adsorbent mass, contact time, initial EA concentration, and pH on EA removal were analyzed. The EA was removed within the first 2 min of the reaction with an efficiency of 99% from experimental solutions and 94% from real wastewater. The maximum adsorption capacities were 314.7 mg g^-1 for the fly ash-based synthetic zeolite (NaP1_FA) and 363.0 mg g^-1 for the carbon-zeolite composite (NaP1_C). A fivefold regeneration of the NaP1_FA and NaP1_C showed no significant loss of adsorption efficiency. These findings indicate that zeolitic materials effectively remove EA and can be further investigated for removing other pharmaceuticals from water and wastewater.

Influence of Nanomaterials and Other Factors on Biohydrogen Production Rates in Microbial Electrolysis Cells-A Review

Microbial Electrolysis Cells (MECs) are one of the bioreactors that have been used to produce bio-hydrogen by biological methods. The objective of this comprehensive review is to study the effects of MEC configuration (single-chamber and double-chamber), electrode materials (anode and cathode), substrates (sodium acetate, glucose, glycerol, domestic wastewater and industrial wastewater), pH, temperature, applied voltage and nanomaterials at maximum bio-hydrogen production rates (Bio-HPR). The obtained results were summarized based on the use of nanomaterials as electrodes, substrates, pH, temperature, applied voltage, Bio-HPR, columbic efficiency (CE) and cathode bio-hydrogen recovery (C Bio-HR). At the end of this review, future challenges for improving bio-hydrogen production in the MEC are also discussed.

Microbial Interactions in Electroactive Biofilms for Environmental Engineering Applications: A Role for Nonexoelectrogens

Microbial electrochemical systems have gained much attention over the past decade due to their potential for various environmental engineering applications ranging from energy production to wastewater treatment to bioproduction. At the heart of these systems lie exoelectrogens-microorganisms capable of exporting electrons generated during metabolism to external electron acceptors such as electrodes. The bacterial biofilm communities on these electrodes are dominated by exoelectrogens but are nonetheless extremely diverse. So far, within the field, the main focus has been on the electroactive bacteria. However, to broaden our understanding of these communities, it is crucial to clarify how the remaining inhabitants of electrode-respiring biofilms contribute to the overall function of the biofilm. Ultimately, such insights may enable improvement of microbial electrochemical systems by reshaping the community structure with naturally occurring beneficial strains.

Deciphering the fate of antibiotic resistance genes in norfloxacin wastewater treated by a bio-electro-Fenton system

The misuse of antibiotics has increased the prevalence of antibiotic resistance genes (ARGs), considered a class of critical environmental contaminants due to their ubiquitous and persistent nature. Previous studies reported the potentiality of bio-electro-Fenton processes for antibiotic removal and ARGs control. However, the production and fate of ARGs in bio-electro-Fenton processes triggered by microbial fuel cells are rare. In this study, the norfloxacin (NFLX) average residual concentrations within two days were 2.02, 6.07 and 14.84 mg/L, and the average removal efficiency of NFLX was 79.8 %, 69.6 % and 62.9 % at the initial antibiotic concentrations of 10, 20 and 40 mg/L, respectively. The most prevalent resistance gene type in all processes was the fluoroquinolone antibiotic gene. Furthermore, Proteobacteria was the dominant ARG-carrying bacteria. Overall, this study can provide theoretical support for the efficient treatment of high antibiotics-contained wastewater by bio-electro-Fenton systems to better control ARGs from the perspective of ecological security.

Current Progress in Natural Degradation and Enhanced Removal Techniques of Antibiotics in the Environment: A Review

Antibiotics are used extensively throughout the world and their presence in the environment has caused serious pollution. This review summarizes natural methods and enhanced technologies that have been developed for antibiotic degradation. In the natural environment, antibiotics can be degraded by photolysis, hydrolysis, and biodegradation, but the rate and extent of degradation are limited. Recently, developed enhanced techniques utilize biological, chemical, or physicochemical principles for antibiotic removal. These techniques include traditional biological methods, adsorption methods, membrane treatment, advanced oxidation processes (AOPs), constructed wetlands (CWs), microalgae treatment, and microbial electrochemical systems (such as microbial fuel cells, MFCs). These techniques have both advantages and disadvantages and, to overcome disadvantages associated with individual techniques, hybrid techniques have been developed and have shown significant potential for antibiotic removal. Hybrids include combinations of the electrochemical method with AOPs, CWs with MFCs, microalgal treatment with activated sludge, and AOPs with MFCs. Considering the complexity of antibiotic pollution and the characteristics of currently used removal technologies, it is apparent that hybrid methods are better choices for dealing with antibiotic contaminants.

Anaerobic electrochemical membrane bioreactor effectively mitigates antibiotic resistance genes proliferation under high antibiotic selection pressure

The spread of antibiotics and antibiotic resistance genes (ARGs) in environments has posed potential threats to public health. Unfortunately, conventional biological wastewater treatment technologies generally show insufficient removal of antibiotics and ARGs. Bioelectrochemical systems, which can effectively degrade refractory organic pollutants via enhancing microbial metabolisms through electrochemical redox reaction, may provide an alternative for the control of antibiotics and ARGs. Herein, an anaerobic electrochemical membrane bioreactor (AnEMBR) was conducted by combining bioelectrochemical system and anaerobic membrane bioreactor to treat antibiotic-containing wastewater. The AnEMBR at open circuit showed stable CH4 production and high removal of COD and chlortetracycline (CTC) in treating 2.5-15 mg/L CTC. However, increasing CTC to 45 mg/L completely inhibited the methanogenesis of AnEMBR at open circuit. After applying external voltage in AnEMBR, the performances of AnEMBR were significantly improved (e.g., increased CH4 production and CTC removal). Moreover, CTC exposure significantly increased the relative abundances of ARGs in sludge, supernatant, and effluent in AnEMBR at open circuit. Applying voltage greatly attenuated the total relative abundances of ARGs in the supernatant and effluent of AnEMBR compared to those at open circuit. This could be attributed to the enrichment of tetracycline degradation gene tetX, which greatly enhanced the removal of CTC by the AnEMBR and thus reduced the selective pressure of CTC on the microorganisms in supernatant and effluent for ARGs proliferation. These results would provide an effective wastewater treatment technology for treating high-level antibiotic-containing wastewater to mitigate the potential risk of ARGs and antibiotics spread in receiving water body.

Integration of microbial electrochemical systems and photocatalysis for sustainable treatment of organic recalcitrant wastewaters: Main mechanisms, recent advances, and present prospects

In recent years, microbial electrochemical systems (MESs) have demonstrated to be an environmentally friendly technology for wastewater treatment and simultaneous production of value-added products or energy. However, practical applications of MESs for the treatment of recalcitrant wastewater are limited by their low power output and slow rates of pollutant biodegradation. As a novel technology, hybrid MESs integrating biodegradation and photocatalysis have shown great potential to accelerate the degradation of bio-recalcitrant pollutants and increase the system output. In this review, we summarize recent advances of photo-assisted MESs for enhanced removal of recalcitrant pollutants, and present further discussion about the synergistic effect of biodegradation and photocatalysis. In addition, we analyse in detail different set-up configurations, discuss mechanisms of photo-enhanced extracellular electron transfer, and briefly present ongoing research cases. Finally, we highlight the current limitations and corresponding research gaps, and propose insights for future research.

Sustainable adsorptive removal of antibiotic residues by chitosan composites: An insight into current developments and future recommendations

During COVID-19 crisis, water pollution caused by pharmaceutical residuals have enormously aggravated since millions of patients worldwide are consuming tons of drugs daily. Antibiotics are the preponderance pharmaceutical pollutants in water bodies that surely cause a real threat to human life and ecosystems. The excellent characteristics of chitosan such as nontoxicity, easy functionality, biodegradability, availability in nature and the abundant hydroxyl and amine groups onto its backbone make it a promising adsorbent. Herein, we aimed to provide a comprehensive overview of recent published research papers regarding the removal of antibiotics by chitosan composite-based adsorbents. The structure, ionic form, optimum removal pH and λ_max of the most common antibiotics including Tetracycline, Ciprofloxacin, Amoxicillin, Levofloxacin, Ceftriaxone, Erythromycin, Norfloxacin, Ofloxacin, Doxycycline, Cefotaxime and Sulfamethoxazole were summarized. The development of chitosan composite-based adsorbents in order to enhance their adsorption capacity, reusability and validity were presented. Moreover, the adsorption mechanisms of these antibiotics were explored to provide more information about adsorbate-adsorbent interactions. Besides the dominant factors on the adsorption process including pH, dosage, coexisting ions, etc. were discussed. Moreover, conclusions and future recommendations are provided to inspire for further researches.

An Overview of Antibiotic Resistance and Abiotic Stresses Affecting Antimicrobial Resistance in Agricultural Soils

Excessive use of antibiotics in the healthcare sector and livestock farming has amplified antimicrobial resistance (AMR) as a major environmental threat in recent years. Abiotic stresses, including soil salinity and water pollutants, can affect AMR in soils, which in turn reduces the yield and quality of agricultural products. The objective of this study was to investigate the effects of antibiotic resistance and abiotic stresses on antimicrobial resistance in agricultural soils. A systematic review of the peer-reviewed published literature showed that soil contaminants derived from organic and chemical fertilizers, heavy metals, hydrocarbons, and untreated sewage sludge can significantly develop AMR through increasing the abundance of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARBs) in agricultural soils. Among effective technologies developed to minimize AMR’s negative effects, salinity and heat were found to be more influential in lowering ARGs and subsequently AMR. Several strategies to mitigate AMR in agricultural soils and future directions for research on AMR have been discussed, including integrated control of antibiotic usage and primary sources of ARGs. Knowledge of the factors affecting AMR has the potential to develop effective policies and technologies to minimize its adverse impacts.

Migration, Transformation and Removal of Macrolide Antibiotics in The Environment: A Review

Macrolide antibiotics (MAs), as a typical emerging pollutant, are widely detected in environmental media. When entering the environment, MAs can interfere with the growth, development and reproduction of organisms, which has attracted extensive attention. However, there are few reviews on the occurrence characteristics, migration and transformation law, ecotoxicity and related removal technologies of MAs in the environment. In this work, combined with the existing relevant research, the migration and transformation law and ecotoxicity characteristics of MAs in the environment are summarized, and the removal mechanism of MAs is clarified. Currently, most studies on MAs are based on laboratory simulation experiments, and there are few studies on the migration and transformation mechanism between multiphase states. In addition, the cost of MAs removal technology is not satisfactory. Therefore, the following suggestions are put forward for the future research direction. The migration and transformation process of MAs between multiphase states (such as soil-water-sediment) should be focused on. Apart from exploring the new treatment technology of MAs, the upgrading and coupling of existing MAs removal technologies to meet emission standards and reduce costs should also be concerned. This review provides some theoretical basis and data support for understanding the occurrence characteristics, ecotoxicity and removal mechanism of MAs.

Performance and bacterial community of bio-electrochemical system treating simulated domestic wastewater containing low concentration of cephalosporin antibiotics

This study investigated the effects of five cephalosporin antibiotics (ceftazidime, ceftriaxone, cefdinir, cefixime and cefepime) on performance and bacterial community structure in bio-electrochemical systems (BES) and sequencing batch biofilm reactor (SBBR). The results showed that the external electric field had no significant effect on the removal of COD and ammonia nitrogen in water. The removal rates of five antibiotics in BES increased by 28.5%, 20.0%, 9.1%, 21.0%, and 11.5%, respectively. High-through sequencing showed that microbial membrane-growing process increased species diversity, and antibiotics had a significant inhibitory effect on the initial biofilm of the reactor. As time progressed, the inhibitory effect was weakened, and the microorganism were tolerated and re-enriched. The increase in the type and concentration of antibiotics and the applied electric field had a significant effect on the microorganisms in the reactor. The dominant microorganisms for antibiotic removal in the SBBR were Luteococcus, Cloacibacterium, Dysgonomonas, and Ottowia. The dominant bacteria in the BES were Ottowia and Tahibacte. The abundance of these strains increased significantly during antibiotic acclimation. The abundance of Ottowia, Tahibacter, and Nakamurella were significantly higher than SBBR. Thus the BES system had a good antibiotic degradation effect. The BES can effectively treat simulated domestic sewage containing multiple antibiotics, laying a theoretical foundation for the actual wastewater treatment.

Algae-mediated antibiotic wastewater treatment: A critical review

The existence of continually increasing concentrations of antibiotics in the environment is a serious potential hazard due to their toxicity and persistence. Unfortunately, conventional treatment techniques, such as those utilized in wastewater treatment plants, are not efficient for the treatment of wastewater containing antibiotic. Recently, algae-based technologies have been found to be a sustainable and promising technique for antibiotic removal. Therefore, this review aims to provide a critical summary of algae-based technologies and their important role in antibiotic wastewater treatment. Algal removal mechanisms including bioadsorption, bioaccumulation, and biodegradation are discussed in detail, with using algae-bacteria consortia for antibiotic treatment, integration of algae with other microorganisms (fungi and multiple algal species), hybrid algae-based treatment and constructed wetlands, and the factors affecting algal antibiotic degradation comprehensively described and assessed. In addition, the use of algae as a precursor for the production of biochar is highlighted, along with the modification of biochar with other materials to improve its antibiotic removal capacity and hybrid algae-based treatment with advanced oxidation processes. Furthermore, recent novel approaches for enhancing antibiotic removal, such as the use of genetic engineering to enhance the antibiotic degradation capacity of algae and the integration of algal antibiotic removal with bioelectrochemical systems are discussed. Finally, some based on the critical review, key future research perspectives are proposed. Overall, this review systematically presents the current progress in algae-mediated antibiotic removal technologies, providing some novel insights for improved alleviation of antibiotic pollution in aquatic environments.

Magnetite-enhanced bioelectrochemical stimulation for biodegradation and biomethane production of waste activated sludge

Microbial electrolytic cell (MEC) and magnetite (M) have shown excellent performance in promoting anaerobic digestion (AD) of biowastes. In this study, four types of anaerobic systems (i.e. single AD, M-AD, MEC-AD, and M-MEC-AD) were developed to comprehensively investigate the potential effects of magnetite-enhanced bioelectrochemical stimulation on the biodegradation of waste activated sludge (WAS) and methane (CH₄) production. Results showed that M-MEC-AD system produced the highest cumulative CH₄ yield, 9.4% higher than that observed in MEC-AD system. Bioelectrochemical stimulation enriched electroactive Geobacter, and classical methanogens (Methanosaeta and Methanobacterium), and the proliferation was further promoted when coupling with magnetite. The relative abundance of Geobacter (6.9%), Methanosaeta (0.3%), and Methanobacterium (12.6%) in M-MEC-AD system was about 10.8, 1.2, and 1.2 times of MEC-AD system, respectively. The integration of magnetite could serve as the conductive materials, and promote inherent indirect electron transfer (IET) and emerging direct electron transfer (DET) between methanogens and fermentative bacteria, building a more energy-efficient route for interspecies electron transfer and methane productivity. This study demonstrated the positive promotion of the coupled bioelectrochemical regulation and magnetite on organic biodegradation, process stability and CH₄ productivity, providing some references for the integrated technology in sludge treatment and bioenergy recovery.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

The influence of external resistance on the performance of microbial fuel cell and the removal of sulfamethoxazole wastewater

Microbial fuel cells (MFCs) are promising equipment for simultaneous treatment of sewage and power generation. External resistance (R_ext) plays a crucial impact in the performance of MFCs in antibiotic wastewater treatment and antibiotic resistance genes (ARGs) reduction. In this study, R_ext and whether to add 20 mg/L sulfamethoxazole (SMX) as variables, it was observed that the performance of several chemical properties of MFCs was optimal when R_ext was 1000 Ω. The power density before and after addition of SMX was 1220.5 ± 24.5 mW/m² and 1186.2 ± 9.2 mW/m², respectively; Furthermore, the degradation rate of SMX was as high as 87.52 ± 1.97% within 48 h. High-throughput sequencing results showed that both R_ext and SMX affected the microbial community and relative abundance of the phylum and genera. Meanwhile, the MFCs with 1000 Ω R_ext generated less the targeted ARGs. Experimental results showed that 1000 Ω was the most suitable R_ext for MFCs in the treatment of antibiotic wastewater.

Comparative analysis of fecal microbiota composition diversity in Tibetan piglets suffering from diarrheagenic Escherichia coli (DEC)

This study was ascertained to investigate the adverse effects of pathogenic E. coli on gut microbiota of Tibetan piglets with history of yellow and white dysentery. For this purpose, a total of 18 fecal samples were collected from infected and healthy Tibetan piglets for 16S rRNA gene amplification and sequencing of V3-V4 region. Results showed that Firmicutes, Bacteroidia Fusobacteriota, Proteobacteria and Actinobacteriota were the predominant bacteria in Tibetan piglets at the level of phylum classification. Results on classification at family level showed that Lactobacillus, Bacteroidota, Fusobacteriota and Enterobacteriaceae were the dominant bacteria. Results on classification of bacteria at phylum level compared with normal piglets indicated that Bacteroidota, Actinobacteriota, Euryarchaota and Spirochaetota in fecal microbial community in Tibetan piglets showing yellow dysenteric and diarrhea group were significantly decreased (P ≤ 0.05). Compared with the feces of healthy Tibetan piglets, the abundance of Escherichia-Shigella, Lactobacillus and Enterococcus increased significantly in feces of Tibetan piglets having yellow dysentery and white dysentery. Moreover, results exhibited that the Proteobacteria and Fusobacteriota were significantly increased (P ≤ 0.05) suggesting dominant microbial community. Results revealed that E. coli induced different pathological alterations in intestine including damage to intestinal epithelial cells, infiltration of inflammatory cells, presence of red blood cells in spaces of tissues, hemorrhages and necrosis of intestinal villi in piglets with history of yellow dysentery. This study for the first time reported the composition, characteristics, and differences of the fecal microflora diversity of Tibetan piglets with yellow and white dysentery in Qinghai-Tibet Plateau, which can provide a suitable support for effective control of diarrhoeal disease in these animals.

Microbial community dynamic shifts associated with sulfamethoxazole degradation in microbial fuel cells

Though sulfamethoxazole (SMX) degradation at the low or medium concentration (SMX< 30 mg/L) has been reported in the microbial fuel cell (MFC), further exploration is still urgently required to investigate how the high concentration of SMX affect the anode biofilm formation. In this study, the degradation mechanism of SMX and the response of microbial community to SMX at different initial concentrations (0, 0.5, 5 and 50 mg/L) were investigated in MFCs. The highest SMX removal efficiency of 98.4% was obtained in MFC (5 mg/L). SMX at optimal concentration (5 mg/L) could serve as substrate accelerating the extracellular electron transfer. However, high concentration of SMX (50 mg/L) conferred significant inhibition on the electron transfer with SMX removal decline to 84.4%. The 16S rRNA high-throughput sequencing revealed the significant shift of the anode biofilms communities with different initial SMX concentrations were observed in MFCs. Thauera and Geobacter were the predominant genus, with relative abundance of 31.9% in MFC (50 mg/L SMX) and 52.7% in MFC (5 mg/L SMX). Methylophilus exhibited a huge increase with the highest percentage of 16.4% in MFC (50 mg/L). Hence, the functional bacteria of Thauera, Geobacter and Methylophilus endowed significant tolerance to the selection pressure from high concentration of SMX in MFCs. Meanwhile, some bacteria including Ornatilinea, Dechloromonas and Longilinea exhibited a decrease or even disappeared in MFCs. Therefore, initial concentrations of SMX played a fundamental role in modifying the relative abundance of predominant populations. This finding would promote theories support for understanding the evolution of anode biofilm formation related to the different initial concentrations of SMX in MFCs.

Recent trends in advanced oxidation process-based degradation of erythromycin: Pollution status, eco-toxicity and degradation mechanism in aquatic ecosystems

Wide spread documentation of antibiotic pollution is becoming a threat to aquatic environment. Erythromycin (ERY), a macrolide belonging antibiotic is at the top of this list with its concentrations ranging between ng/L to a few μg/L in various global waterbodies giving rise to ERY-resistance genes (ERY-RGs) and ERY- resistance bacteria (ERY-RBs) posing serious threat to the aquatic organisms. ERY seems resistant to various conventional water treatments, remained intact and even increased in terms of mass loads after treatment. Enhanced oxidation potential, wide pH range, elevated selectivity, adaptability and greater efficiency makes advance oxidation processes (AOPs) top priority for degrading pollutants with aromatic rings and unsaturated bonds like ERY. In this manuscript, recent developments in AOPs for ERY degradation are reported along with the factors that affect the degradation mechanism. ERY, marked as a risk prioritized macrolide antibiotic by 2015 released European Union watch list, most probably due to its protein inhibition capability considered third most widely used antibiotic. The current review provides a complete ERY overview including the environmental entry sources, concentration in global waters, ERY status in STPs, as well as factors affecting their functionality. Along with that this study presents complete outlook regarding ERY-RGs and provides an in depth detail regarding ERY's potential threats to aquatic biota. This study helps in figuring out the best possible strategy to tackle antibiotic pollution keeping ERY as a model antibiotic because of extreme toxicity records.

Simultaneous sulfamethoxazole degradation with electricity generation by microbial fuel cells using Ni-MOF-74 as cathode catalysts and quantification of antibiotic resistance genes

Antibiotic wastewater presents serious challenges in water treatment. Metal-organic frameworks (MOFs) have received significant attention as promising precursors and sacrificial templates in the preparation of porous carbon-supported catalysts. Herein, we investigated the sulfamethoxazole (SMX) degradation and electrochemical performance of microbial fuel cells (MFCs) that applied as-prepared Ni-MOF-74 and Ni-N-C (Ni-MOF-74 underwent pyrolysis treatment at different temperatures) as air-cathode catalyst. Firstly, the electrocatalytic activity towards oxygen reduction reaction (ORR) of the catalyst was investigated by rotating disk electrode. The results showed that electron transfer number for Ni-MOF-74 was 2.12, while that of 800Ni-N-C was 3.44, which was close to four-electron reduction. Applying Ni-MOF-74 in MFCs, a maximum power density of 446 mW/m² was obtained, which was close to that of 800Ni-N-C. Besides, using Ni-MOF-74 as cathode catalyst, a chemical oxygen demand removal rate of about 84% was obtained, and the degradation rate of 10 mg/L SMX was 61%. The degradation rate decreased with increasing antibiotic concentration, but the average degradation efficiency increased stepwise. Additionally, the relative abundance of resistant gene sul1 in the reactors of the new catalytic material was about 62% lower than that of sul1 in the control (Pt/C) reactors, and the relative abundance of sul2 was about 73% lower. Moreover, cost assessments related to the catalyst performance are presented. The findings of this study demonstrated that Ni-MOF-74 could be considered as a two-electron transfer ORR catalyst, and offers a promising technique for preparation of Ni-N-C for use as four-electron transfer ORR catalysts. In comparison, Ni-MOF-74 could be a promising ORR catalyst of MFCs for antibiotic degradation.

Electrochemical performance and response of bacterial community during phenanthrene degradation in single-chamber air-cathode microbial fuel cells

Polycyclic aromatic hydrocarbons have attracted considerable attention for their carcinogenic, teratogenic, and mutagenic properties in humans. Phenanthrene is one of the most abundant polycyclic aromatic hydrocarbons in aquatic environments. In this study, different concentrations of phenanthrene were degraded by single-chamber air-cathode microbial fuel cells. The electrochemical parameter of microbial fuel cells and biofilm changes on the anode were observed. The results showed that the addition of phenanthrene reduced the power output of the microbial fuel cell which affected the process of microbial electricity generation. Meanwhile, microorganisms destroyed the original structure of phenanthrene through anaerobic metabolism, and achieved good average degradation of 94.9-98.4%. Observation of the anodic biofilm found that the microbes had tolerance to phenanthrene and the biofilm exhibited to be well-constructed. Bacterial community distribution showed a decrease in the relative abundance of Acidovorax and Aquamicrobium, whereas the relative content of the main electroactive organism, Geobacter, increased by a factor of three. The results show that it is feasible for microbial fuel cells to biodegrade phenanthrene, and provide some references for the changes of microbial community during degradation process.

Antibiotics in wastewater: From its occurrence to the biological removal by environmentally conscious technologies

In this critical review, we explored the most recent advances about the fate of antibiotics on biological wastewater treatment plants (WWTP). Although the occurrence of these pollutants in wastewater and natural streams has been investigated previously, some recent publications still expose the need to improve the detection strategies and the lack of information about their transformation products. The role of the antibiotic properties and the process operating conditions were also analyzed. The pieces of evidence in the literature associate several molecular properties to the antibiotic removal pathway, like hydrophobicity, chemical structure, and electrostatic interactions. Nonetheless, the influence of operating conditions is still unclear, and solid retention time stands out as a key factor. Additionally, the efficiencies and pathways of antibiotic removals on conventional (activated sludge, membrane bioreactor, anaerobic digestion, and nitrogen removal) and emerging bioprocesses (bioelectrochemical systems, fungi, and enzymes) were assessed, and our concern about potential research gaps was raised. The combination of different bioprocess can efficiently mitigate the impacts generated by these pollutants. Thus, to plan and design a process to remove and mineralize antibiotics from wastewater, all aspects must be addressed, the pollutant and process characteristics and how it is the best way to operate it to reduce the impact of antibiotics in the environment.

Environmental aspects of hormones estriol, 17β-estradiol and 17α-ethinylestradiol: Electrochemical processes as next-generation technologies for their removal in water matrices

Hormones as a group of emerging contaminants have been increasingly used worldwide, which has increased their concern at the environmental level in various matrices, as they reach the water bodies through effluents due to the ineffectiveness of conventional treatments. Here we review the environmental scenario of hormones estriol (E3), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2), explicitly their origins, their characteristics, interactions, how they reach the environment, and, above all, the severe pathological and toxicological damage to animals and humans they produce. Furthermore, studies for the treatment of these endocrine disruptors (EDCs) are deepened using electrochemical processes as the remediation methods of the respective hormones. In the reported studies, these micropollutants were detected in samples of surface water, underground, soil, and sediment at concentrations that varied from ng L^-1 to μg L^-1 and are capable of causing changes in the endocrine system of various organisms. However, although there are studies on the ecotoxicological effects concerning E3, E2, and EE2 hormones, little is known about their environmental dispersion and damage in quantitative terms. Moreover, biodegradation becomes the primary mechanism of removal of steroid estrogens removal by sewage treatment plants, but it is still inefficient, which shows the importance of studying electrochemically-driven processes such as the Electrochemical Advanced Oxidation Processes (EAOP) and electrocoagulation for the removal of emerging micropollutants. Thus, this review covers information on the occurrence of these hormones in various environmental matrices, their respective treatment, and effects on exposed organisms for ecotoxicology purposes.

Tetracycline inhibition and transformation in microbial fuel cell systems: Performance, transformation intermediates, and microbial community structure

Tetracycline (TC) transformation in the anode of an air cathode microbial fuel cell (MFC) and in the cathode of an MFC-Fenton system was investigated. TC at 10 mg/L in the anolyte was removed by 43-74% in 14-d cycles, mainly attributed to adsorption. The electrochemical activity, COD and acetate consumption of the anodic biofilm were inhibited by TC; inhibition was reversed when TC addition was stopped. Over 84 d of MFC operation with TC, Geobacter and Mycobacterium in the anode biofilm decreased, while Janthinobacterium and Comamonas increased. Over 99% of TC at 10-40 mg/L was removed within 8 h in the MFC-Fenton cathode. O₂^-•/HO₂• and •OH were responsible for the cathodic TC degradation. The maximum current was 0.93 mA (at 250 Ω) and increased by 36.3% by the MFC-Fenton reaction. Cathodic MFC-Fenton is an efficient and energy-saving process for TC removal, compared to slow and problematic anodic TC bio-oxidation.

Dynamic evolution of electrochemical and biological features in microbial fuel cells upon chronic exposure to increasing oxytetracycline dosage

Dynamic changes in power generation and electrochemical properties were compared between the control microbial fuel cells (C-MFC) and an oxytetracycline (OTC)-treated MFC (O-MFC) on days 84, 139, 174, 224, 295, 307 and 353. The results showed that a high concentration of OTC (>5 mg·L^-1) could inhibit microbial activity and result in a decline of voltage output and power density compared with the same C-MFC. However, with the prolongation of incubation time, the inhibitory effect was gradually weakened. Electrochemical analyses demonstrated that long-term OTC acclimation reduced the ohmic and polarisation resistance of the anode, which was conducive to the recovery of electrochemical performance. More than 99% of 10 mg·L^-1 OTC could be removed within 48 h, and the antibacterial activity of the MFC effluent on Escherichia coli DH5α was conclusively eliminated. High-throughput sequencing analysis revealed that the diversity and richness of the microbial community decreased significantly after long-term OTC enrichment. Acinetobacter, Petrimonas, Spirochaetaceae and Delftia were enriched and played a dominant role in C-MFC stability and power generation. The promotion by Cupriavidus, Geobacter and Stenotrophomonas in simultaneous OTC degradation and bioelectricity generation in the O-MFC was demonstrated.

Simultaneous removal and high tolerance of norfloxacin with electricity generation in microbial fuel cell and its antibiotic resistance genes quantification

Norfloxacin (NFLX) is a synthetic antibiotic widely used in the treatment of infectious diseases. In this work, the performance of microbial fuel cells (MFCs) toward NFLX degradation, electricity production and the antibiotics resistances genes (ARGs) generation was investigated. NFLX degradation efficiency and COD removal reached 65.5% and 94.5% respectively. The increase in NFLX concentration (128 mg/L) had no significant influence on NFLX degradation efficiency, COD removal and MFCs voltage output while the electricity was successfully generated. The quantitative polymerase chain reaction (qPCR) indicated low absolute abundances of ARGs (mdtk, mdtm, and pmra) compared with the traditional wastewater treatment plants (WWTPs). Anodic bacteria can survive in the presence of high NFLX concentration and sustain its degradation and electricity production. In terms of NFLX degradation, COD removal, diminished ARGs generation and simultaneous energy production, MFC seems to be a promising technology for antibiotics wastewater treatment with a potential to overcome the ARGs challenge.

Electrodes bioaugmentation promotes the removal of antibiotics from concentrated sludge in microbial electrolysis cells

Microbial electrolysis cells (MECs) had a potential to improve antibiotics removal from wastewater. However, research on antibiotics removal from concentrated sludge using MECs is still very limited. In this study, antibiotics removal and microbial responses in MECs treating concentrated sludge under different applied voltages (0.3 V-1.5 V) were investigated. Results showed that antibiotics removal efficiencies at 0.6 V and 1.0 V were 16.7%-26.6% higher than other applied voltages. The applied voltages had no obvious effects on the viability, activity and composition of microorganisms in the suspended sludge even up to 1.5 V. Bioelectrodes exhibited higher bioelectrocatalytic activity and denser microbial aggregation at 0.6 V and 1.0 V, under which higher antibiotics removal was also achieved. The enhanced removal of antibiotics at the optimal applied voltages was mainly contributed by the bioaugmentation of electrodes, but was irrelative with the electrochemical reaction and the microbial responses in suspended sludge.

Degradation pathways, microbial community and electricity properties analysis of antibiotic sulfamethoxazole by bio-electro-Fenton system

Sulfamethoxazole (SMX) is a general antibiotic that is frequently identified in wastewater and surface water. In this study, the degradation and metabolic pathway of SMX by bio-electro-Fenton systems equipped with a CNT/r-FeOOH cathode were investigated. When initial SMX = 25 mg/L, the removal efficiency of SMX reached 94.66% by the bio-electro-Fenton system. The concentrations of sul1, sul2, sul3, sulA, intI1 and 16S rRNA genes were examined in effluents. Four out of the six ARGs analysed were detected. Among all quantified sul genes, sul1 and sulA were the most abundant. High-throughput sequencing revealed that the microbial communities and relative abundance at the phylum and genus levels were affected by different SMX concentrations. In addition, the intermediates were detected and the possible SMX degradation pathway by the bio-electro-Fenton process in the present system was proposed. Furthermore, the highest power density obtained was 283.32 ± 16.35 mW/m² (SMX = 25 mg/L). This study provides an efficient and cost effective method for degrading antibiotics.

Microbial electro-Fenton: A promising system for antibiotics resistance genes degradation and energy generation

The widespread use of antibiotics has accelerated the development of antibiotic resistance genes (ARGs), which are now recognized as emerging environmental contaminants that pose a high risk to public health. In this study, simultaneous antibiotic and ARGs removal and bioelectricity generation was explored in a microbial electro-Fenton system using erythromycin (ERY) as a model antibiotic compound. The results showed that ERY could be degraded, with an average removal efficiency of 88.73% in 48 h, and the average removal efficiency of chemical oxygen demand in the microbial electro-Fenton with 50 μg L^-1 ERY reached 86.84% in 48 h, which was lower than that in the control group (89.11%). The produced ARGs were analyzed and degraded in a cathode chamber. The quantity of ermB was significantly reduced, with log removal reaching a value of 1.96. More importantly, all erm genes (ermB, ermC, ermG) showed a tendency to be degraded. Furthermore, the maximum power density obtained with respect to the electrode area was 0.193 W m^-2 when ERY was added, corresponding to a current density of 0.583 A m^-2 (external resistor = 1000 Ω), which was 14% larger than that of the control group (0.169 W m^-2). The results of this study demonstrate the potential of microbial electro-Fenton for ERY and ARGs removal.