Fabrication and characterization of porous cellulose beads with high strength and specific surface area via preliminary chemical cross-linking reaction for protein separation

Exploring the effects of resin particle sizes on enhancing antibody binding capacity of a hybrid biomimetic ligand

Particle size is a critical parameter of chromatographic resins that significantly affects protein separation. In this study, effects of resin particle sizes (31.26 μm, 59.85 μm and 85.22 μm named Aga-31, Aga-60 and Aga-85, respectively) on antibody adsorption capacity and separation performance of a hybrid biomimetic ligand were evaluated. Their performance was investigated through static adsorption and breakthrough assays to quantify static and dynamic binding capacity (Qmax and DBC). The static adsorption results revealed that the Qmax for hIgG was 152 mg/g resin with Aga-31, 151 mg/g resin with Aga-60, and 125 mg/g resin with Aga-85. Moreover, the DBC at 10% breakthrough for hIgG with a residence time of 2 min was determined to be 49.4 mg/mL for Aga-31, 45.9 mg/mL for Aga-60, and 38.9 mg/mL for Aga-85. The resins with smaller particle sizes exhibited significantly higher capacity compared to typical commercial agarose resins and a Protein A resin (MabSelect SuRe). Furthermore, the Aga-31 resin with the hybrid biomimetic ligand demonstrated exceptional performance in terms of IgG purity (>98%) and recovery (>96%) after undergoing 20 separation cycles from CHO cell supernatant. These findings are helpful in further chromatographic resin design for the industrial application of antibody separation and purification.

pH-Responsive Cellulose/Silk/Fe3O4 Hydrogel Microbeads Designed for Biomedical Applications

In this study, cellulose/Fe3O4 hydrogel microbeads were prepared through the sol-gel transition of a solvent-in-oil emulsion using various cellulose-dissolving solvents and soybean oil without surfactants. Particularly, 40% tetrabutylammonium hydroxide (TBAH) and 40% tetrabutylphosphonium hydroxide (TBPH) dissolved cellulose at room temperature and effectively dispersed Fe3O4, forming cellulose/Fe3O4 microbeads with an average diameter of ~15 µm. Additionally, these solvents co-dissolved cellulose and silk, allowing for the manufacture of cellulose/silk/Fe3O4 hydrogel microbeads with altered surface characteristics. Owing to the negatively charged surface characteristics, the adsorption capacity of the cellulose/silk/Fe3O4 microbeads for the cationic dye crystal violet was >10 times higher than that of the cellulose/Fe3O4 microbeads. When prepared with TBAH, the initial adsorption rate of bovine serum albumin (BSA) on the cellulose/silk/Fe3O4 microbeads was 18.1 times higher than that on the cellulose/Fe3O4 microbeads. When preparing TBPH, the equilibrium adsorption capacity of the cellulose/silk/Fe3O4 microbeads for BSA (1.6 g/g) was 8.5 times higher than that of the cellulose/Fe3O4 microbeads. The pH-dependent BSA release from the cellulose/silk/Fe3O4 microbeads prepared with TBPH revealed 6.1-fold slower initial desorption rates and 5.2-fold lower desorption amounts at pH 2.2 than those at pH 7.4. Cytotoxicity tests on the cellulose and cellulose/silk composites regenerated with TBAH and TBPH yielded nontoxic results. Therefore, cellulose/silk/Fe3O4 microbeads are considered suitable pH-responsive supports for orally administered protein pharmaceuticals.

Utilization of an aqueous two-phase emulsification to prepare bimodal porous cellulose monolith for efficient adsorption of bovine serum albumin

Cellulose monolith has garnered significant interest in the field of biochromatography, which lies in its interconnected porous structure, large surface area and biocompatibility. In this context, we propose a novel approach for preparing cellulose monoliths using an aqueous two-phase system devoid of any organic solvents and surfactants. In this strategy, emulsifying cellulose solution into PEG 20,000 solution gives bicontinuous aqueous phases and further porous cellulose monolith after regeneration of dissolved cellulose. And the macroporous channels are derived from the removal of the PEG 20,000 aqueous phase while the micropores are from the phase separation of the cellulose phase. Physical characterizations reveal the obtained cellulose monolith exhibits exceptional column permeability of 1.36 × 10-11 m2 and a substantial surface area of 39.34 m2/g. Furthermore, cellulose monolith is functionalized with diethyl ethylamine hydrochloride (DEAE-HCl) to evaluate its potential as an anion adsorbent. Experimental results reveal that the DEAE-modified cellulose monolith possesses of adsorptive capacity of 316.58 mg/g of bovine serum albumin, along with fast adsorption kinetic. This study introduces an innovative strategy for fabricating porous cellulose monoliths tailored for biochromatography applications.

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

Novel PVA/carboxylated cellulose antimicrobial hydrogel grafted with curcumin and ε-polylysine for chilled chicken preservation

PVA/CC/CUR/PL composite films containing curcumin (CUR) and ε-polylysine (PL) were prepared by casting and chemical grafting methods to address the threat to food spoilage. Morphological analysis showed that the grafting of CUR and PL resulted in a rough cross-section of the polymer matrix. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the grafting of CUR and PL into the polymer matrix via esterification and amidation reactions, respectively. Thermal weight loss analysis showed that grafting process positively improved the thermal stability. The PVA/CC/CUR/PL films exhibited strong bactericidal activity, reaching 99.0% and 99.8% for Pseudomonas lundensis and Shewanella putrefaciens, respectively. After 8 days of storage, the total number of colonies and the TVB-N content in the PVA/CC/CUR/PL group decreased by 1.51 lg CFU/g and 13.77 mg/100 g, respectively. Therefore, PVA/CC/CUR/PL films are considered as a promising bactericidal material with good mechanical properties, functionality, and other excellent characteristics.

A Review on the Modification of Cellulose and Its Applications

The latest advancements in cellulose and its derivatives are the subject of this study. We summarize the characteristics, modifications, applications, and properties of cellulose. Here, we discuss new breakthroughs in modified cellulose that allow for enhanced control. In addition to standard approaches, improvements in different techniques employed for cellulose and its derivatives are the subject of this review. The various strategies for synthetic polymers are also discussed. The recent advancements in polymer production allow for more precise control, and make it possible to make functional celluloses with better physical qualities. For sustainability and environmental preservation, the development of cellulose green processing is the most abundant renewable substance in nature. The discovery of cellulose disintegration opens up new possibilities for sustainable techniques. Based on the review of recent scientific literature, we believe that additional chemical units of cellulose solubility should be used. This evaluation will evaluate the sustainability of biomass and processing the greenness for the long term. It appears not only crucial to dissolution, but also to the greenness of any process.

Magnetic porous cellulose surface-imprinted polymers synthetized with assistance of deep eutectic solvent for specific recognition and purification of bisphenols

Magnetic porous cellulose molecularly imprinted polymers-based bisphenols have been developed using Fe₃O₄ as the magnetic material, a deep eutectic solvent as the assisted solvent, and N-isopropylacrylamide as the functional monomer. The resulting magnetic porous cellulose molecularly imprinted polymers were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometry, thermal gravimetric analysis, and Brunauer-Emmett-Teller analysis. Moreover, the adsorption properties of the magnetic porous cellulose molecularly imprinted polymers toward bisphenol A, bisphenol F, and bisphenol AF were investigated using static, dynamic, and selective adsorption experiments. The introduction of porous cellulose materials significantly improves the capabilities of the material. The adsorption capacity, mass transfer efficiency, and selectivity of the magnetic porous cellulose molecularly imprinted polymers toward bisphenol A were 5.9, 4.0, and 4.4 times those of traditional molecularly imprinted polymers. Moreover, the adsorption stability of the magnetic porous cellulose molecularly imprinted polymers was investigated under different temperature and pH conditions. The adsorption characteristics of the magnetic porous cellulose molecularly imprinted polymers toward the target molecules were investigated using adsorption isotherm, kinetic, and thermodynamic models. Hydrogen bonding is the main interaction formed between the magnetic porous cellulose molecularly imprinted polymers and the target molecules. Magnetic porous cellulose molecularly imprinted polymers have great application value with excellent stability and reusability. Finally, the combination of the magnetic porous cellulose molecularly imprinted polymers and high-performance liquid chromatography or ultra-performance liquid chromatography-mass spectrometry was successfully used for the purification and detection of bisphenols in milk (1.349 ng/mL bisphenol F and 3.014 ng/mL bisphenol AF), canned fruits (1129 ng/mL bisphenol A, 10.11 ng/mL bisphenol F, and 91.87 ng/mL bisphenol AF), and fish (11.91 ng/mL bisphenol AF) samples. Furthermore, the magnetic porous cellulose molecularly imprinted polymer method is more selective, sensitive, and accurate than the traditional precipitation method.

Tentacle-type poly(hydroxamic acid)-modified macroporous cellulose beads: Synthesis, characterization, and application for heavy metal ions adsorption

Herein, a facile yet efficient template method to fabricate macroporous cellulose beads (MCBs) is reported. In this method, micro-size CaCO₃ is utilized to create macroporous structure for fast mass transfer, and tentacle-type poly(hydroxamic acid) as adsorption ligand is immobilized on the MCBs to improve adsorption capacity. The obtained tentacle-type poly(hydroxamic acid)-modified MCMs (TP-CMCBs) show uniform spherical shape (about 80 μm), bimodal pore system (macropores≈3.0 μm; diffusional pores≈14.5 nm), and high specific surface area (52.7 m²/g). The adsorption performance of TP-CMCBs is evaluated by heavy metal ions adsorption. TP-CMCBs exhibit not only high adsorption capacities (342.5, 261.5 and 243.2 mg/g for Cu²⁺, Mn²⁺ and Ni²⁺, respectively.), but also fast adsorption rate (>70% of its equilibrium uptake within 30 min). Additionally, TP-CMCBs have excellent reusability, as evidenced by that the adsorption capacities have no obvious change even after five-time consecutive adsorption-desorption cycles. All results demonstrate that the proposed TP-CMCBs have great potential in removal of heavy metal ions.

Preparation of PEG-modified wool keratin/sodium alginate porous scaffolds with elasticity recovery and good biocompatibility

To improve mechanical properties of keratin (KR) porous scaffolds, we prepared a PEGylated keratin through thiol-ene click reaction. Several porous scaffolds were prepared by blending PEGylated keratin with sodium alginate (SA). The surface morphology, mechanical properties, and porosity of scaffolds were detailed studied at different KR/SA proportions. The results showed the content of SA had an effect on pore formation and mechanical properties. When the mass ratio of KR to SA was 2:1, the stress of yield point of the keratin porous scaffold reached 1.24 MPa, and also showed good deformation recovery ability. The PEGylated keratin porous scaffold had a high porosity and great cytocompatibility. Its' porosity is up to 81.7% and the cell viability is about 117.78%. This allows it to absorb the simulated plasma quickly (9.20 ± 0.37 g/g). In addition, the structural stability and acid-base stability of the keratin porous scaffold were also improved after PEGylation. Overall, the PEGylated keratin porous scaffold will be promising in tissue materials due to its great physical, chemical, and biological properties.

Recent advances in protein chromatography with polymer-grafted media

The strategy of using polymer-grafted media is effective to create protein chromatography of high capacity and uptake rate, giving rise to an excellent performance in high-throughput protein separation due to its high dynamic binding capacity. Taking the scientific development and technological innovation of protein chromatography as the objective, this review is devoted to an overview of polymer-grafted media reported in the last five years, including their fabrication routes, protein adsorption and chromatography, mechanisms behind the adsorption behaviors, limitations of polymer-grafted media and chromatographic operation strategies. Particular emphasis is placed on the elaboration and discussion on the behaviors of ion-exchange chromatography (IEC) with polymer-grafted media because IEC is the most suitable chromatographic mode for this kind of media. Recent advances in both the theoretical and experimental investigations on polymer-grafted media are discussed by focusing on their implications to the rational design of novel chromatographic media and mobile phase conditions for the development of high-performance protein chromatography. It is concluded that polymer-grafted media are suitable for development of IEC and mixed-mode chromatography with charged and low hydrophobic ligands, but not for hydrophobic interaction chromatography with high hydrophobic ligands and affinity chromatography with ligands that have single binding site on the protein.

Direct preparation of porous cellulose microspheres via a self-growth process on bamboo fibers and their functionalization for specific adsorption of histidine-rich proteins

The traditional preparation of cellulose microspheres always involves tedious synthetic procedures (e.g., dissolution, emulsification and regeneration) and inevitable organic solvents, which undergoes both high production cost and environmental contamination. To overcome these issues, a feasible and green synthesis strategy is proposed to construct porous cellulose microspheres (PCMs) via one-step spontaneous formation relying on sodium periodate oxidation of pure bamboo fibers. By this strategy, a cluster of robust cellulose microspheres grow up on the surface of bamboo fibers in aqueous phase through amorphous oxidized cellulose self-assembly accumulation and then drop out when their sizes increase to about 15 µm. After being immobilized with Cu(II), the prepared cellulose microspheres serve as metal affinity adsorbent for proteins adsorption, showing high adsorption capacity, good selectivity and excellent reusability for bovine hemoglobin (BHb). Together with green and easy synthesis, the novel cellulose microspheres show a promising alternative to commercially available adsorbent support.