Parameters modulating the maximum insertion pressure of proteins and peptides in lipid monolayers

Promising antibacterial efficacy of arenicin peptides against the emerging opportunistic pathogen Mycobacterium abscessus

BACKGROUND

Mycobacterium abscessus, a fast-growing non-tuberculous mycobacterium, is an emerging opportunistic pathogen responsible for chronic bronchopulmonary infections in people with respiratory diseases such as cystic fibrosis (CF). Due to its intrinsic polyresistance to a wide range of antibiotics, most treatments for M. abscessus pulmonary infections are poorly effective. In this context, antimicrobial peptides (AMPs) active against bacterial strains and less prompt to cause resistance, represent a good alternative to conventional antibiotics. Herein, we evaluated the effect of three arenicin isoforms, possessing two or four Cysteines involved in one (Ar-1, Ar-2) or two disulfide bonds (Ar-3), on the in vitro growth of M. abscessus.

METHODS

The respective disulfide-free AMPs, were built by replacing the Cysteines with alpha-amino-n-butyric acid (Abu) residue. We evaluated the efficiency of the eight arenicin derivatives through their antimicrobial activity against M. abscessus strains, their cytotoxicity towards human cell lines, and their hemolytic activity on human erythrocytes. The mechanism of action of the Ar-1 peptide was further investigated through membrane permeabilization assay, electron microscopy, lipid insertion assay via surface pressure measurement, and the induction of resistance assay.

RESULTS

Our results demonstrated that Ar-1 was the safest peptide with no toxicity towards human cells and no hemolytic activity, and the most active against M. abscessus growth. Ar-1 acts by insertion into mycobacterial lipids, resulting in a rapid membranolytic effect that kills M. abscessus without induction of resistance.

CONCLUSION

Overall, the present study emphasized Ar-1 as a potential new alternative to conventional antibiotics in the treatment of CF-associated bacterial infection related to M. abscessus.

Structural and functional insights into the delivery of a bacterial Rhs pore-forming toxin to the membrane

Bacterial competition is a significant driver of toxin polymorphism, which allows continual compensatory evolution between toxins and the resistance developed to overcome their activity. Bacterial Rearrangement hot spot (Rhs) proteins represent a widespread example of toxin polymorphism. Here, we present the 2.45 Å cryo-electron microscopy structure of Tse5, an Rhs protein central to Pseudomonas aeruginosa type VI secretion system-mediated bacterial competition. This structural insight, coupled with an extensive array of biophysical and genetic investigations, unravels the multifaceted functional mechanisms of Tse5. The data suggest that interfacial Tse5-membrane binding delivers its encapsulated pore-forming toxin fragment to the target bacterial membrane, where it assembles pores that cause cell depolarisation and, ultimately, bacterial death.

Biocidal and antibiofilm activities of arginine-based surfactants against Candida isolates

Amino-acid-based surfactants are a group of compounds that resemble natural amphiphiles and thus are expected to have a low impact on the environment, owing to either the mode of surfactant production or its means of disposal. Within this context, arginine-based tensioactives have gained particular interest, since their cationic nature-in combination with their amphiphilic character-enables them to act as broad-spectrum biocides. This capability is based mainly on their interactive affinity for the microbial envelope that alters the latter's structure and ultimately its function. In the work reported here, we investigated the efficiency of Nα-benzoyl arginine decyl- and dodecylamide against Candida spp. to further our understanding of the antifungal mechanism involved. For the assays, both a Candida albicans and a Candida tropicalis clinical isolates along with a C. albicans-collection strain were used as references. As expected, both arginine-based compounds proved to be effective against the strains tested through inhibiting both the planktonic and the sessile growth. Furthermore, atomic force microscopy techniques and lipid monolayer experiments enabled us to gain insight into the effect of the surfactant on the cellular envelope. The results demonstrated that all the yeasts treated exhibited changes in their exomorphologic structure, with respect to alterations in both roughness and stiffness, relative to the nontreated ones. This finding-in addition to the amphiphiles' proven ability to insert themselves within this model fungal membrane-could explain the changes in the yeast-membrane permeability that could be linked to viability loss and mixed-vesicle release.

The biological role of charge distribution in linear antimicrobial peptides

INTRODUCTION

Antimicrobial peptides (AMP) have received particular attention due to their capacity to kill bacteria. Although much is known about them, peptides are currently being further researched. A large number of AMPs have been discovered, but only a few have been approved for topical use, due to their promiscuity and other challenges, which need to be overcome.

AREAS COVERED

AMPs are diverse in structure. Consequently, they have varied action mechanisms when targeting microorganisms or eukaryotic cells. Herein, the authors focus on linear peptides, particularly those that are alpha-helical structured, and examine how their charge distribution and hydrophobic amino acids could modulate their biological activity.

EXPERT OPINION

The world currently needs urgent solutions to the infective problems caused by resistant pathogens. In order to start the race for antimicrobial development from the charge distribution viewpoint, bioinformatic tools will be necessary. Currently, there is no software available that allows to discriminate charge distribution in AMPs and predicts the biological effects of this event. Furthermore, there is no software available that predicts the side-chain length of residues and its role in biological functions. More specialized software is necessary.

Simultaneous membrane and RNA binding by tick-borne encephalitis virus capsid protein

Tick-borne encephalitis virus is an enveloped, pathogenic, RNA virus in the family Flaviviridae, genus Flavivirus. Viral particles are formed when the nucleocapsid, consisting of an RNA genome and multiple copies of the capsid protein, buds through the endoplasmic reticulum membrane and acquires the viral envelope and the associated proteins. The coordination of the nucleocapsid components to the sites of assembly and budding are poorly understood. Here, we investigate the interactions of the wild-type and truncated capsid proteins with membranes with biophysical methods and model membrane systems. We show that capsid protein initially binds membranes via electrostatic interactions with negatively-charged lipids, which is followed by membrane insertion. Additionally, we show that membrane-bound capsid protein can recruit viral genomic RNA. We confirm the biological relevance of the biophysical findings by using mass spectrometry to show that purified virions contain negatively-charged lipids. Our results suggest that nucleocapsid assembly is coordinated by negatively-charged membrane patches on the endoplasmic reticulum and that the capsid protein mediates direct contacts between the nucleocapsid and the membrane.

The P. aeruginosa effector Tse5 forms membrane pores disrupting the membrane potential of intoxicated bacteria

The type VI secretion system (T6SS) of Pseudomonas aeruginosa injects effector proteins into neighbouring competitors and host cells, providing a fitness advantage that allows this opportunistic nosocomial pathogen to persist and prevail during the onset of infections. However, despite the high clinical relevance of P. aeruginosa, the identity and mode of action of most P. aeruginosa T6SS-dependent effectors remain to be discovered. Here, we report the molecular mechanism of Tse5-CT, the toxic auto-proteolytic product of the P. aeruginosa T6SS exported effector Tse5. Our results demonstrate that Tse5-CT is a pore-forming toxin that can transport ions across the membrane, causing membrane depolarisation and bacterial death. The membrane potential regulates a wide range of essential cellular functions; therefore, membrane depolarisation is an efficient strategy to compete with other microorganisms in polymicrobial environments.

Histidine 19 Residue Is Essential for Cell Internalization of Antifungal Peptide SmAPα1-21 Derived from the α-Core of the Silybum marianum Defensin DefSm2-D in Fusarium graminearum

The synthetic peptide SmAP_α1-21 (KLCEKPSKTWFGNCGNPRHCG) derived from DefSm2-D defensin α-core is active at micromolar concentrations against the phytopathogenic fungus Fusarium graminearum and has a multistep mechanism of action that includes alteration of the fungal cell wall and membrane permeabilization. Here, we continued the study of this peptide’s mode of action and explored the correlation between the biological activity and its primary structure. Transmission electron microscopy was used to study the ultrastructural effects of SmAP_α1-21 in conidial cells. New peptides were designed by modifying the parent peptide SmAP_α1-21 (SmAPH19R and SmAPH19A, where His19 was replaced by Arg or Ala, respectively) and synthesized by the Fmoc solid phase method. Antifungal activity was determined against F. graminearum. Membrane permeability and subcellular localization in conidia were studied by confocal laser scanning microscopy (CLSM). Reactive oxygen species (ROS) production was assessed by fluorescence spectroscopy and CLSM. SmAP_α1-21 induced peroxisome biogenesis and oxidative stress through ROS production in F. graminearum and was internalized into the conidial cells’ cytoplasm. SmAPH19R and SmAPH19A were active against F. graminearum with minimal inhibitory concentrations (MICs) of 38 and 100 µM for SmAPH19R and SmAPH19A, respectively. The replacement of His19 by Ala produced a decrease in the net charge with a significant increase in the MIC, thus evidencing the importance of the positive charge in position 19 of the antifungal peptide. Like SmAP_α1-21, SmAP2H19A and SmAP2H19R produced the permeabilization of the conidia membrane and induced oxidative stress through ROS production. However, SmAPH19R and SmAPH19A were localized in the conidia cell wall. The replacement of His19 by Ala turned all the processes slower. The extracellular localization of peptides SmAPH19R and SmAPH19A highlights the role of the His19 residue in the internalization.

The Complete Phase Diagram of Monolayers of Enantiomeric N-Stearoyl-threonine Mixtures with Preferred Heterochiral Interactions

Langmuir monolayers of chiral amphiphiles are well-controlled model systems for the investigation of phenomena related to stereochemistry. Here, we have investigated mixed monolayers of one pair of enantiomers (l and d) of the amino-acid-based amphiphile N-stearoyl-threonine. The monolayer characteristics were studied by pressure-area isotherm measurements and grazing incidence X-ray diffraction (GIXD) over a wide range of mixing ratios defined by the d-enantiomer mole fraction x_D. While the isotherms provide insights into thermodynamical aspects, such as transition pressure, compression/decompression hysteresis, and preferential homo- and heterochiral interactions, GIXD reveals the molecular structural arrangements on the Ångström scale. Dominant heterochiral interactions in the racemic mixture lead to compound formation and the appearance of a nonchiral rectangular lattice, although the pure enantiomers form a chiral oblique lattice. Miscibility was found to be limited to mixtures with 0.27 ≲ x_D ≲ 0.73, as well as to both outer edges (x_D ≲ 0.08 and x_D ≳ 0.92). Beyond this range, coexistence of oblique and rectangular lattices occurs, as is clearly seen in the GIXD patterns. Based on the results, a complete phase diagram with two eutectic points at x_D ≈ 0.25 and x_D ≈ 0.75 is proposed. Moreover, N-stearoyl-threonine was found to have a strong tendency to form a hydrogen-bonding network between the headgroups, which promotes superlattice formation.

Mixing Behavior of the Binary Monolayers of Fatty Acids Based on Their Cohesive Energy Differences

The morphology involving the height difference and the surface roughness of the binary monolayers of saturated fatty acids were evaluated using atomic force microscopy (AFM) to investigate the mixing behavior of their monolayers. AFM observations revealed that the mixed monolayers of (palmitic acid/arachidic acid) and (arachidic acid/lignoceric acid), which had four methylene group differences between fatty acids, were in a molecularly mixed state. Further, the mixed monolayer of (stearic acid/lignoceric acid), which had six methylene group differences, was in a phase-separated state. From the results of the present and previous studies, it became clear that the difference in the cohesive energy between fatty acids, which corresponds to the enthalpy difference, was an important factor in determining whether the molecular aggregation state of a fatty acid mixed monolayer was in a molecularly mixed or phase-separated state. Moreover, the boundary value of cohesive energy difference was approximately 2.5 kJ mol^-1 at a subphase temperature of 293 K.

Ceramide enhances binding of LC3/GABARAP autophagy proteins to cardiolipin-containing membranes

Macroautophagy, or autophagy, is a process in which cell macromolecules, or even organelles, are engulfed in a double-membrane vesicle, the autophagosome, and directed to a lysosome. Among autophagy-related proteins, LC3/GABARAP constitute a protein family derived from yeast Atg8. They play important roles in autophagosome formation, binding future cargo organelles and promoting autophagosome growth. The involvement of specific lipids in this process is poorly understood. The present study explores the interaction of LC3/GABARAP proteins with phospholipid monolayers and bilayers based on phosphatidylcholine or on sphingomyelin. Cardiolipin is found to be essential for the protein interaction with such bilayers, as measured through gradient centrifugation experiments, while ceramide markedly increases binding. Giant unilamellar vesicles examined under confocal fluorescence microscopy reveal that ceramide segregates laterally into very rigid domains, while GABARAP binds only the more fluid regions, suggesting that the enhancing role of ceramide is exerted by the minority of ceramide molecules dispersed in the fluid phase. Although in further autophagy steps the LC3/GABARAP proteins are covalently bound to a phospholipid, this is not the case in our system, thus it is proposed that the observed ceramide effects would correspond to very early stages in the process, such as cargo recognition.

Membrane insertion mechanism of the caveola coat protein Cavin1

Caveolae are cholesterol-enriched membrane invaginations linked to severe muscle and lipid disorders. Their formation is dependent on assembly of the protein Cavin1 at the lipid membrane interface driving membrane curvature. In this work, we dissect the mechanism for how Cavin1 binds and inserts into membranes using a combination of biochemical and biophysical characterization as well as computational modeling. The proposed model for membrane assembly potentiates dynamic switching between shielded and exposed hydrophobic helices used for membrane insertion and clarifies how Cavin1 can drive membrane curvature and the formation of caveolae.

Caveolae are small plasma membrane invaginations, important for control of membrane tension, signaling cascades, and lipid sorting. The caveola coat protein Cavin1 is essential for shaping such high curvature membrane structures. Yet, a mechanistic understanding of how Cavin1 assembles at the membrane interface is lacking. Here, we used model membranes combined with biophysical dissection and computational modeling to show that Cavin1 inserts into membranes. We establish that initial phosphatidylinositol (4, 5) bisphosphate [PI(4,5)P₂]–dependent membrane adsorption of the trimeric helical region 1 (HR1) of Cavin1 mediates the subsequent partial separation and membrane insertion of the individual helices. Insertion kinetics of HR1 is further enhanced by the presence of flanking negatively charged disordered regions, which was found important for the coassembly of Cavin1 with Caveolin1 in living cells. We propose that this intricate mechanism potentiates membrane curvature generation and facilitates dynamic rounds of assembly and disassembly of Cavin1 at the membrane.

Is It Possible to Find an Antimicrobial Peptide That Passes the Membrane Bilayer with Minimal Force Resistance? An Attempt at a Predictive Approach by Molecular Dynamics Simulation

There is still no answer to the mechanism of penetration of AMP peptides through the membrane bilayer. Several mechanisms for such a process have been proposed. It is necessary to understand whether it is possible, using the molecular dynamics method, to determine the ability of peptides of different compositions and lengths to pass through a membrane bilayer. To explain the passage of a peptide through a membrane bilayer, a method for preparing a membrane phospholipid bilayer was proposed, and 656 steered molecular dynamics calculations were carried out for pulling 7 amyloidogenic peptides with antimicrobial potential, and monopeptides (homo-repeats consisting of 10 residues of the same amino acid: Poly (Ala), Poly (Leu), Poly (Met), Poly (Arg), and Poly (Glu)) with various sequences through the membrane. Among the 15 studied peptides, the peptides exhibiting the least force resistance when passing through the bilayer were found, and the maximum reaction occurred at the boundary of the membrane bilayer entry. We found that the best correlation between the maximum membrane reaction force and the calculated parameters corresponds to the instability index (the correlation coefficient is above 0.9). One of the interesting results of this study is that the 10 residue amyloidogenic peptides and their extended peptides, with nine added residue cell-penetrating peptides and four residue linkers, both with established antimicrobial activity, have the same bilayer resistance force. All calculated data are summarized and posted on the server.

Autophagy protein LC3C binding to phospholipid and interaction with lipid membranes

Autophagy is a process in which parts of the eukaryotic cell are selectively degraded in the lysosome. The materials to be catabolized are first surrounded by a double-membrane structure, the autophagosome. Autophagosome generation is a complex event, in which many proteins are involved. Among the latter, yeast Atg8 or its mammalian orthologues are essential in autophagosome membrane elongation, shaping and closure. A subfamily of the human Atg8 orthologues is formed by the proteins LC3A, LC3B, and LC3C. Previous studies suggest that, at variance with the other two, LC3C does not participate in cardiolipin-mediated mitophagy. The present study was devoted to exploring the binding of LC3C to lipid vesicles, bilayers and monolayers, and the ensuing protein-dependent perturbing effects, in the absence of the mitochondrial lipid cardiolipin. All Atg8 orthologues are covalently bound to a phospholipid prior to their involvement in autophagosome elongation. In our case, a mutant in the C-terminal amino acid, LC3C G126C, together with the use of a maleimide-derivatized phosphatidyl ethanolamine, ensured LC3C lipidation, up to 100% under certain conditions. Ultracentrifugation, surface pressure measurements, spectroscopic and cryo-electron microscopic techniques revealed that lipidated LC3C induced vesicle aggregation (5-fold faster in sonicated than in large unilamellar vesicles) and inter-vesicular lipid mixing (up to 82%), including inner-monolayer lipid mixing (up to 32%), consistent with in vitro partial vesicle fusion. LC3C was also able to cause the release of 80-90% vesicular aqueous contents. The data support the idea that LC3C would be able to help in autophagosome elongation/fusion in autophagy phenomena.

The Interaction of Gb3 Glycosphingolipids with ld and lo Phase Lipids in Lipid Monolayers Is a Function of Their Fatty Acids

The glycosphingolipid Gb₃ is a specific receptor of the bacterial Shiga toxin (STx). Binding of STx to Gb₃ is a prerequisite for its internalization into the host cells, and the ceramide's fatty acid of Gb₃ has been shown to influence STx binding. In in vitro studies on liquid ordered (l_o)/liquid disordered (l_d) coexisting artificial membranes, Shiga toxin B (STxB) binds solely to l_o domains, thus harboring Gb₃ concomitant with an observed lipid redistribution process. These findings raise the question of how the molecular structure of the fatty acid of Gb₃ influences the interaction of Gb₃ with the different lipids preferentially either found in the l_o phase, namely, sphingomyelin and cholesterol, or in the l_d phase. We addressed this question by using a series of synthetically available and unlabeled Gb₃ glycosphingolipids carrying different long chain C₂₄ fatty acids (saturated, monounsaturated, and α-hydroxylated). In conjunction with surface tension experiments on Langmuir monolayers, we quantified the excess of free energy of mixing of the different Gb₃ species in monolayers composed of either sphingomyelin or cholesterol or composed of a fluid phase lipid (DOPC). From a calculation of the total free energy of mixing, we conclude that mixing of the saturated Gb₃ species with the l_d lipid DOPC is energetically less favorable than all other combinations, while the unsaturated species mix equally well with the l_o phase lipids sphingomyelin and cholesterol and the l_d phase lipid DOPC. Furthermore, we found that STxB partially penetrates in mixed lipid monolayers (DOPC/sphingomyelin/cholesterol) containing the Gb₃ sphingolipid with a saturated or a monounsaturated C₂₄ fatty acid. The maximum insertion pressure, as a measure for protein insertion, is >30 mN/m for both Gb₃ molecules and is not significantly different for the two Gb₃ species.

Farnesylation and lipid unsaturation are critical for the membrane binding of the C-terminal segment of G-Protein Receptor Kinase 1

Many proteins are modified by the covalent addition of different types of lipids, such as myristoylation, palmitoylation and prenylation. Lipidation is expected to promote membrane association of proteins. Visual phototransduction involves many lipid-modified proteins. The G-Protein-coupled receptor of rod photoreceptors, rhodopsin, is inactivated by G-Protein-coupled Receptor Kinase 1 (GRK1). The C-terminus of GRK1 is farnesylated and its truncation has been shown to result in a very high decrease of its enzymatic activity, most likely because of the loss of its membrane localization. Little information is available on the membrane binding of GRK1 as well as of most prenylated proteins. Measurements of the membrane binding of the non-farnesylated and farnesylated C-terminal segment of GRK1 were thus performed using lipids typical of those found in rod outer segment disk membranes. Their random coil secondary structure was determined using circular dichroism and infrared spectroscopy. The non-farnesylated C-terminal segment of GRK1 has no surface activity. In contrast, the farnesylated C-terminal segment of GRK1 shows a particularly strong binding to lipid monolayers bearing at least one unsaturated fatty acyl chain. No binding is observed in the presence of monolayers of saturated phospholipids, in agreement with the low affinity of farnesylated Ras proteins for lipids in the liquid-ordered state. Altogether, these data demonstrate that the farnesyl group of the C-terminal segment of GRK1 is mandatory for its membrane binding, which is favored by particular lipids or lipid mixtures. This information will also be useful for the understanding of the membrane binding of other prenylated proteins.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Enhancement of Phospholipid Binding and Catalytic Efficiency of Streptomyces klenkii Phospholipase D by Increasing Hydrophobicity of the Active Site Loop

The mechanism of active site loops of Streptomyces phospholipase D (PLD) binding to the lipid-water interface for catalytic reactions still remains elusive. A flexible loop (residues 376-382) in the active site of Streptomyces klenkii PLD (SkPLD) is conserved within PLDs in most of the Streptomyces species. The residue Ser380 was found to be essential for the enzyme's adsorption to the interface and its substrate recognition. The S380V mutant showed a 4.8 times higher catalytic efficiency and nearly seven times higher adsorption equilibrium coefficient compared to the wild-type SkPLD. The monolayer film technique has confirmed that the substitution of Ser380 with valine in the loop exhibited positive interaction between the enzyme and PCs with different acyl chain lengths. The results of the interfacial binding properties indicated that the S380V mutant might display suitable phosphatidylserine synthesis activity. The present study will be helpful to explain the role of residue 380 in the active site loops of Streptomyces PLD.

Interactions between the Cell Membrane Repair Protein S100A10 and Phospholipid Monolayers and Bilayers

Protein S100A10 participates in different cellular mechanisms and has different functions, especially at the membrane. Among those, it forms a ternary complex with annexin A2 and the C-terminal of AHNAK and then joins the dysferlin membrane repair complex. Together, they act as a platform enabling membrane repair. Both AHNAK and annexin A2 have been shown to have membrane binding properties. However, the membrane binding abilities of S100A10 are not clear. In this paper, we aimed to study the membrane binding of S100A10 in order to better understand its role in the cell membrane repair process. S100A10 was overexpressed by E. coli and purified by affinity chromatography. Using a Langmuir monolayer as a model membrane, the binding parameters and ellipsometric angles of the purified S100A10 were measured using surface tensiometry and ellipsometry, respectively. Phosphorus-31 solid-state nuclear magnetic resonance spectroscopy was also used to study the interaction of S100A10 with lipid bilayers. In the presence of a lipid monolayer, S100A10 preferentially interacts with unsaturated phospholipids. In addition, its behavior in the presence of a bilayer model suggests that S100A10 interacts more with the negatively charged polar head groups than the zwitterionic ones. This work offers new insights on the binding of S100A10 to different phospholipids and advances our understanding of the parameters influencing its membrane behavior.

Interaction of Two Amphipathic α-Helix Bundle Proteins, ApoLp-III and ApoE 3, with the Oil-Aqueous Interface

Protein-lipid interactions govern the structure and function of lipoprotein particles, which transport neutral lipids and other hydrophobic cargo through the blood stream. Apolipoproteins cover the surface of lipoprotein particles, including low-density (LDL) and high-density (HDL) lipoproteins, and determine their function. Previous work has focused on small peptides derived from these apolipoproteins or used such artificial lipid systems as Langmuir monolayers or the lipid disc assay to determine how apolipoproteins interact with the neutral lipid interface. Here, we focus on a recurring protein domain found in many neutral lipid-binding proteins, the amphipathic α-helix bundle. We use liquid droplet tensiometry to investigate protein-lipid interactions on an oil droplet, which mimics the real lipoprotein interface. The N-terminus of apoE 3 and full-length apoLp-III serve as model proteins. We find that each protein interacts with lipid monolayers at the oil-aqueous interface in unique ways. For the first time, we show that helix bundle unfolding is critical for proper protein insertion into the lipid monolayer at the oil-aqueous interface and that specific membrane lipids promote the rebinding of protein upon fluctuation in droplet size. These results shed new light on how amphipathic apolipoprotein α-helix bundles interact with neutral lipid particles.

The C-Terminus of Perilipin 3 Shows Distinct Lipid Binding at Phospholipid-Oil-Aqueous Interfaces

Lipid droplets (LDs) are ubiquitously expressed organelles; the only intracellular organelles that contain a lipid monolayer rather than a bilayer. Proteins localize and bind to this monolayer as they do to intracellular lipid bilayers. The mechanism by which cytosolic LD binding proteins recognize, and bind, to this lipid interface remains poorly understood. Amphipathic α-helix bundles form a common motif that is shared between cytosolic LD binding proteins (e.g., perilipins 2, 3, and 5) and apolipoproteins, such as apoE and apoLp-III, found on lipoprotein particles. Here, we use pendant drop tensiometry to expand our previous work on the C-terminal α-helix bundle of perilipin 3 and the full-length protein. We measure the recruitment and insertion of perilipin 3 at mixed lipid monolayers at an aqueous-phospholipid-oil interface. We find that, compared to its C-terminus alone, the full-length perilipin 3 has a higher affinity for both a neat oil/aqueous interface and a phosphatidylcholine (PC) coated oil/aqueous interface. Both the full-length protein and the C-terminus show significantly more insertion into a fully unsaturated PC monolayer, contrary to our previous results at the air-aqueous interface. Additionally, the C-terminus shows a preference for lipid monolayers containing phosphatidylethanolamine (PE), whereas the full-length protein does not. These results strongly support a model whereby both the N-terminal 11-mer repeat region and C-terminal amphipathic α-helix bundle domains of perilipin 3 have distinct lipid binding, and potentially biological roles.

Measuring protein insertion areas in lipid monolayers by fluorescence correlation spectroscopy

Membrane insertion of protein domains is an important step in many membrane remodeling processes, for example, in vesicular transport. The membrane area taken up by the protein insertion influences the protein binding affinity as well as the mechanical stress induced in the membrane and thereby its curvature. To our knowledge, this is the first optical measurement of this quantity on a system in equilibrium with direct determination of the number of inserted protein and no further assumptions concerning the binding thermodynamics. Whereas macroscopic total area changes in lipid monolayers are typically measured on a Langmuir film balance, finding the number of inserted proteins without perturbing the system and quantitating any small area changes has posed a challenge. Here, we address both issues by performing two-color fluorescence correlation spectroscopy directly on the monolayer. With a fraction of the protein being fluorescently labeled, the number of inserted proteins is determined in situ without resorting to invasive techniques such as collecting the monolayer by aspiration. The second color channel is exploited to monitor a small fraction of labeled lipids to determine the total area increase. Here, we use this method to determine the insertion area per molecule of Sar1, a protein of the COPII complex, which is involved in transport vesicle formation. Sar1 has an N-terminal amphipathic helix, which is responsible for membrane binding and curvature generation. An insertion area of (3.4 ± 0.8) nm² was obtained for Sar1 in monolayers from a lipid mixture typically used in COPII reconstitution experiments, in good agreement with the expected insertion area of the Sar1 amphipathic helix. By using the two-color approach, determining insertion areas relies only on local fluorescence measurements. No macroscopic area measurements are needed, giving the method the potential to also be applied to laterally heterogeneous monolayers and bilayers.

Dengue fusion peptide in Langmuir monolayers: A binding parameter study

Membrane fusion is known to be the primary mechanism of entry of flaviviruses into host cells. Several studies reported the investigation of the membrane fusion mechanism mediated by the fusion peptide, a component of the membrane protein surrounding the flaviviruses. In this study, we investigated the interaction of Dengue fusion peptide (FLAg) with Langmuir monolayers to uncover the role of membrane charges and organization in its membrane binding. Binding parameters of FLAg were obtained by measuring its adsorption onto Langmuir monolayers of different types of individual lipids, as well as their mixtures. Specific peptide binding was observed in the presence of charged lipid monolayers at different pHs, revealing that the lipid composition of the membrane modulates peptide interaction, and the preference of the peptide for negatively charged lipids.

Non-ionic surfactants as innovative skin penetration enhancers: insight in the mechanism of interaction with simple 2D stratum corneum model system

Transdermal drug delivery is a passive diffusion process of an active compound through the skin which is affected by drug solubility in the multilamellar lipidic matrix of the stratum corneum (SC). Widely used non-ionic surfactants (NIS) can be added into transdermal formulations to enhance the penetration of drugs by influencing the packing of the stratum corneum lipidic matrix. Objective of our study was to analyse the interaction between selected NIS and a simple SC lipidic matrix model system using a variety of surface-sensitive techniques based on the application of Langmuir monolayers. In this work, the well-known surfactant Polysorbate 80 was compared with a modern surfactant Sucrose monolaurate. Infrared reflection-absorption spectroscopy (IRRAS) and epifluorescence microscopy provide information about the effects of those surfactants on the SC model system. Monolayer isotherms of the SC model mixture indicate a very stiff and well-packed layer, however, packing defects are evidenced in epifluorescence studies. The injection of the two NIS underneath the SC monolayers proved their potential to penetrate into the SC model at the air-water interface having a maximum insertion pressure (MIP) above the assumed lateral pressure of biological membranes. The NIS adsorbed preferentially into packing defects seen in epifluorescence microscopy studies with Sucrose monolaurate being more active than Polysorbate 80 in disordering the SC monolayer.

Structural information and membrane binding of truncated RGS9-1 Anchor Protein and its C-terminal hydrophobic segment

Visual phototransduction takes place in photoreceptor cells. Light absorption by rhodopsin leads to the activation of transducin as a result of the exchange of its GDP for GTP. The GTP-bound ⍺-subunit of transducin then activates phosphodiesterase (PDE), which in turn hydrolyzes cGMP leading to photoreceptor hyperpolarization. Photoreceptors return to the dark state upon inactivation of these proteins. In particular, PDE is inactivated by the protein complex R9AP/RGS9-1/Gβ5. R9AP (RGS9-1 anchor protein) is responsible for the membrane anchoring of this protein complex to photoreceptor outer segment disk membranes most likely by the combined involvement of its C-terminal hydrophobic domain as well as other types of interactions. This study thus aimed to gather information on the structure and membrane binding of the C-terminal hydrophobic segment of R9AP as well as of truncated R9AP (without its C-terminal domain, R9AP∆TM). Circular dichroism and infrared spectroscopic measurements revealed that the secondary structure of R9AP∆TM mainly includes ⍺-helical structural elements. Moreover, intrinsic fluorescence measurements of native R9AP∆TM and individual mutants lacking one tryptophan demonstrated that W79 is more buried than W173 but that they are both located in a hydrophobic environment. This method also revealed that membrane binding of R9AP∆TM does not involve regions near its tryptophan residues, while infrared spectroscopy validated its binding to lipid vesicles. Additional fluorescence measurements showed that the C-terminal segment of R9AP is membrane embedded. Maximum insertion pressure and synergy data using Langmuir monolayers suggest that interactions with specific phospholipids could be involved in the membrane binding of R9AP∆TM.

N-terminal acetylation of a mastoparan-like peptide enhances PE/PG segregation in model membranes

The synthetic peptides L1A and its acetylated analog (acL1A) display potent Gram-negative bactericidal activities without being hemolytic. We have gathered evidence that the N-terminal acetylation of L1A enhances the lytic activity in anionic vesicles with high capability to insert into and disturb lipid packing of model membranes. Here, the impact of L1A and acL1A was evaluated on a model membrane that mimics the cytoplasmic membrane of Gram-negative bacteria, which is rich in phosphatidylethanolamine (PE) and phosphatidylglycerol (PG), using 3:1 mixture of POPE/DOPG and a variety of techniques. We followed peptide adsorption and penetration by zeta potential determination of large unilamellar vesicles, accessibility of tryptophan residue to acrylamide by quenching assays, and Gibbs isotherms. The secondary structure of the peptide on the membranes was assessed using circular dichroism. Peptide mixing ability with the lipids and phase segregation was assessed by the observation of Langmuir monolayers with fluorescence microscopy, as well as with differential scanning calorimetry thermograms of multilamellar vesicles. All in all, the results indicate that both peptides adsorb and penetrate POPE/DOPG membranes with similar affinities, decreasing the surface charge, and adopting alpha structures. Both peptides mix with DOPG and demix from POPE, and consequently, persist at the interface to larger surface pressures in the presence of PG than in pure PE monolayers. This selective degree of mixing of the peptides with PE and PG leads to peptide-induced segregation of PG from PE, being the less charged peptide, acL1A, able to segregate the lipids more efficiently.

Lipid-Dependent Interaction of Human N-BAR Domain Proteins with Sarcolemma Mono- and Bilayers

The N-BAR domain of the human Bin1 protein is indispensable for T-tubule biogenesis in skeletal muscles. It binds to lipid mono- and bilayers that mimic the sarcolemma membrane composition, and it transforms vesicles into uniform tubules by generating a decorating protein scaffold. We found that Δ(1-33)BAR, lacking the N-terminal amphipathic helix (H0), and H0 alone bind to sarcolemma monolayers, although both proteins are not able to tubulate sarcolemma vesicles. By variation of the lipid composition, we elucidated the role of PI(4,5)P₂, cholesterol, and an asymmetric sarcolemma composition for Bin1-N-BAR binding and sarcolemma tubulation. Our results indicate that Bin1-N-BAR binding is low in the absence of PI(4,5)P₂ and it is affected by additional changes in the negative headgroup charge and lipid acyl chain composition. However, it is not dependent on the cholesterol content. The results from Langmuir monolayer experiments are complementary to lipid bilayer studies using electron microscopy that provides information on membrane curvature generation.

Mechanism of activation of plant monogalactosyldiacylglycerol synthase 1 (MGD1) by phosphatidylglycerol

Mono- and digalactosyldiacylglycerol are essential galactolipids for the biogenesis of plastids and functioning of the photosynthetic machinery. In Arabidopsis, the first step of galactolipid synthesis is catalyzed by monogalactosyldiacylglycerol synthase 1 (MGD1), a monotopic protein located in the inner envelope membrane of chloroplasts, which transfers a galactose residue from UDP-galactose to diacylglycerol (DAG). MGD1 needs anionic lipids such as phosphatidylglycerol (PG) to be active, but the mechanism by which PG activates MGD1 is still unknown. Recent studies shed light on the catalytic mechanism of MGD1 and on the possible PG binding site. Particularly, Pro189 was identified as a potential residue implicated in PG binding and His155 as the putative catalytic residue. In the present study, using a multifaceted approach (Langmuir membrane models, atomic force microscopy, molecular dynamics; MD), we investigated the membrane binding properties of native MGD1 and mutants (P189A and H115A). We demonstrated that both residues are involved in PG binding, thus suggesting the existence of a PG-His catalytic dyad that should facilitate deprotonation of the nucleophile hydroxyl group of DAG acceptor. Interestingly, MD simulations showed that MGD1 induces a reorganization of lipids by attracting DAG molecules to create an optimal platform for binding.

Interaction of chitosan derivatives with cell membrane models in a biologically relevant medium

HYPOTHESIS

The interaction of chitosan, a natural biopolymer with various biomedical applications, with lipid Langmuir films has been widely investigated as a simple model for cell membranes. However, to ensure polymer solubility, up to now only acidic subphases with pH significantly below biological fluids have been used. To increase the biological significance of these investigations, here we evaluated the effects of two chitosan derivatives (low molecular weight - CH, and positively charged - CH-P40) on phospholipid films (either zwitterionic DPPC or anionic DPPG) using phosphate buffered saline solutions (PBS) as a subphase.

EXPERIMENTS

Surface pressure - area (π-A) isotherms were used to evaluate the expansion and changes in film elasticity, while Sum-Frequency Generation (SFG) vibrational spectroscopy provided information about the chain conformation of lipids.

FINDINGS

It was found that chitosans caused a small expansion of the DPPC film by its insertion within the monolayer. In contrast, they distinctly expanded DPPG monolayers by both chitosan insertion within the lipid monolayer and by interacting with the anionic head group. Therefore, PBS buffer can be used as a subphase for more biologically relevant studies of chitosan interactions with Langmuir films, shedding light on why chitosan is antibacterial but not toxic to mammals, as the interaction mechanism depends on lipid headgroup charge.

AHNAK C-Terminal Peptide Membrane Binding-Interactions between the Residues 5654-5673 of AHNAK and Phospholipid Monolayers and Bilayers

The dysferlin membrane repair complex contains a small complex, S100A10-annexin A2, which initiates membrane repair by recruiting the protein AHNAK to the membrane, where it interacts via binding sites in the C-terminal region. However, no molecular data are available for the membrane binding of the various proteins involved in this complex. Therefore, the present study investigated the membrane binding of AHNAK to elucidate its role in the cell membrane repair process. A chemically synthesized peptide (pAHNAK), comprising the 20 amino acids in the C-terminal domain of AHNAK, was applied to Langmuir monolayer models, and the binding parameters and insertion angles were measured with surface tensiometry and ellipsometry. The interaction of pAHNAK with lipid bilayers was studied using ³¹P solid-state nuclear magnetic resonance. pAHNAK preferentially and strongly interacted with phospholipids that comprised negatively charged polar head groups with unsaturated lipids. This finding provides a better understanding of AHNAK membrane behavior and the parameters that influence its function in membrane repair.

Quantified Membrane Permeabilization Indicates the Lipid Selectivity of Membrane-Active Antimicrobials

Most antimicrobial peptides (AMPs) and their synthetic mimics (SMAMPs) are thought to act by permeabilizing cell membranes. For antimicrobial therapy, selectivity for pathogens over mammalian cells is a key requirement. Understanding membrane selectivity is thus essential for designing AMPs and SMAMPs to complement classical antibiotics in the future. This study focuses on membrane permeabilization induced by SMAMPs and their selectivity for membranes with different lipid compositions. We measure release and fluorescence lifetime of a self-quenching dye in lipid vesicles. Apart from the dose-response, we quantify the strength of individual leakage events, and, employing cumulative kinetics, categorize permeabilization behavior. We propose that differing selectivities in a series of SMAMPs arise from a combination of the effect of the antimicrobial agent and the susceptibility of the membrane (with a given lipid composition) for certain types of leakage behavior. The unselective and hemolytic SMAMP is found to act mainly by the asymmetry stress mechanism, mediated by hydrophobic insertion of SMAMPs into lipid layers. The more selective SMAMPs induced leakage events occurring stochastically over several hours. Lipid intrinsic properties might additionally amplify the efficiency of leakage events. Leakage behavior changes with both the design of the SMAMP and the lipid composition of the membrane. Understanding how leakage behavior contributes to the selectivity and activity of antimicrobial agents will aid the design and screening of antimicrobials. An understanding of the underlying processes facilitates the comparison of membrane permeabilization across in vitro and in vivo assays.

Myelin basic protein (MBP) charge variants show different sphingomyelin-mediated interactions with myelin-like lipid monolayers

Multiple sclerosis (MS) is correlated with increased deimination of myelin basic protein (MBP) in the central nervous system. Here, the interaction of MBP C1 (charge: +19) and MBP C8 (charge: +13) with the major lipids of the cytoplasmic side of the oligodendrocyte membrane is analysed using monolayer adsorption experiments and epifluorescence microscopy. Our findings show that the electrostatic attraction between the positively charged proteins and negatively charged lipids in the myelin-like monolayers competes with the incorporation of MBP into regions directly bordering cholesterol-rich domains. The latter is favoured to avoid additional lipid condensation and reduction in fluidity of the phospholipid layer. We find that MBP C1 does not incorporate at the cholesterol-rich domains if sphingomyelin (SM) is absent from the lipid composition. In contrast, MBP C8 is still incorporated near cholesterol-enriched regions without SM. Thus, the highly charged C1 variant needs a specific interaction with SM, whereas for C8 the incorporation at the cholesterol-rich regions is ensured due to its reduced net positive charge. This phenomenon may be relevant for the correlation of higher amounts of MBP C8 in brains of adult MS patients and healthy children, in which the amount of SM is reduced compared to healthy adults.

Insights into the Relationships Between Herbicide Activities, Molecular Structure and Membrane Interaction of Cinnamon and Citronella Essential Oils Components

Since the 50's, the massive and "environmental naïve" use of synthetic chemistry has revolutionized the farming community facing the dramatic growth of demography. However, nowadays, the controversy grows regarding the long-term harmful effects of these products on human health and the environment. In this context, the use of essential oils (EOs) could be an alternative to chemical products and a better understanding of their mode of biological action for new and optimal applications is of importance. Indeed, if the biocidal effects of some EOs or their components have been at least partly elucidated at the molecular level, very little is currently known regarding their mechanism of action as herbicides at the molecular level. Here, we showed that cinnamon and Java citronella essential oils and some of their main components, i.e.,, cinnamaldehyde (CIN), citronellal (CitA), and citronellol (CitO) could act as efficient herbicides when spread on A. thaliana leaves. The individual EO molecules are small amphiphiles, allowing for them to cross the mesh of cell wall and directly interact with the plant plasma membrane (PPM), which is one of the potential cellular targets of EOs. Hence, we investigated and characterized their interaction with biomimetic PPM while using an integrative biophysical approach. If CitO and CitA, maintaining a similar chemical structure, are able to interact with the model membranes without permeabilizing effect, CIN belonging to the phenylpropanoid family, is not. We suggested that different mechanisms of action for the two types of molecules can occur: while the monoterpenes could disturb the lipid organization and/or domain formation, the phenylpropanoid CIN could interact with membrane receptors.

Exploring the influence of phospholipid monolayer conformation and environmental conditions on the interfacial binding of Gibberella Zeae lipase

The involvement of different parameters on Gibberella zeae lipase (GZEL) membrane binding were characterized by using monomolecular film technology and circular dichroism spectroscopy. Among four kinds of phospholipid monolayers, 1,2‑dimyristoyl‑sn‑glycero‑3‑phosphoethanolamine have the highest maximum insertion pressure (MIP) value. Comparing the GZEL adsorption to phosphatidylcholine monolayers with different acyl chains in sn-1 and sn-2 positions, the higher MIP values were found for 1,2‑dilauroyl‑sn‑glycero‑3‑phosphocholine. Significantly improvement between 1,2‑dioleoyl‑sn‑glycero‑3‑phosphocholine and 1,2‑distearoyl‑sn‑glycero‑3‑phosphocholine suggested that the presence of fatty acid unsaturation may affect protein adsorption by changing the chemical structure in each phospholipid. The MIP value was shown higher (48.6 mN m^-1) at pH 5 and pH 6 (47.5 ± 1.9 mN m^-1) but decreased significantly (34.2 mN m^-1) at pH 9. This may indicate that the proportion of helices in the protein decreases with the alteration of the catalytic center, thus affecting the binding of the protein to its substrate. The MIP values obviously decreased with increasing salt ion concentration, suggesting that excessive salt ion concentration may destabilize the secondary and tertiary structures of the protein, thereby affecting the characteristics of its adsorption at the interfaces. Present studies improve our understanding on the protein-membrane interaction of this enzyme.

Deletion the C-terminal peptides of Vibrio harveyi phospholipase D significantly improved its enzymatic properties

A novel phospholipase D that originate from marine Vibrio harveyi (VhPLD) was recombinant expressed and biochemically characterized. Moreover, effects of C-terminal peptides on catalytic and interfacial binding properties of VhPLD were investigated by constructing two truncated mutants (VhPLD-Δ(472-483) and VhPLD-Δ(437-483)). Optimal reaction temperature and pH value for wild-type VhPLD (VhPLD-WT) was 45 °C and pH 8.0. However, optimal reaction temperature of VhPLD-Δ(437-483) increased to 50 °C. Meanwhile, catalytic efficiency (k_cat/K_M) of VhPLD-Δ(472-483) and VhPLD-Δ(437-483) to the 1,2-Dioctanoyl-sn-glycero-3-phosphatidyl-p-nitrophenol (PpNP) was 12.9 and 14.2 times higher than that of VhPLD-WT. However, when compare the catalytic efficiency between VhPLD-Δ(472-483) and VhPLD-Δ(437-483), no significant change can be found between the two mutants. These results strongly indicated that the C-terminal 12 amino acids (472-483) have important role on the activity of VhPLD. Effects of C-terminal peptides on the interfacial binding properties of VhPLD to different phospholipid monolayers were also investigated by using monolayer film technology. Results of the maximum insertion pressure (MIP) indicated that deletion the C-terminal segment of VhPLD improved its interfacial binding properties to different phospholipid monolayers.

Interaction of Short Pentavalent Cationic Peptides with Negatively Charged DPPG Monolayers and Bilayers: Influence of Peptide Modifications on Binding

The binding of oligopeptides with the structure (RX)₄R and (KXX)₄K, with X being the amino acid G or A, to lipid monolayers and bilayers of dipalmitoyl-phosphatidylglycerol (DPPG) was studied and compared to the binding effects of peptides with the structure (KX)₄K. The monolayer adsorption experiments again showed the superposition of condensation effects due to charge compensation and insertion of amino acid side chains leading to expansion of the monolayer. The latter effect was enhanced when glycine was replaced by alanine. The thermotropic phase behavior of dipalmitoyl-phosphatidylglycerol (DPPG) bilayer membranes and their mixtures with short cationic model peptides was investigated by differential scanning calorimetry and infrared spectroscopy. Increasing the charge distance of the lysine residues in the series (K)₅, (KG)₄K, and (KGG)₄K results in an upshift of the main phase transition of DPPG up to 5 K, as predicted for pure electrostatic binding. All peptides exhibit only unordered structures in bulk solution as well as when bound to DPPG bilayers. (KGG)₄K additionally shows a high propensity of turn structures due to its flexibility. The exchange of glycine by alanine in (KAA)₄K leads only to a marginal increase in T_m, in contrast to the binding of (KA)₄K where the formation of intervesicular antiparallel β-sheets occurs, leading to a much more pronounced stabilization of the gel phase. This shows that the sequence and flexibility of the oligopeptides has an important influence on the formation of secondary structures bound to the bilayers. Binding of (RX)₄R peptides to DPPG bilayers has almost no influence on the lipid phase transition in bilayers. Here, condensation and insertion effects almost compensate, as the results of monolayer experiments show. This is due to the higher propensity of arginine side chains to insert into the lipid headgroup region.

Effect of N- and C-Terminal Amino Acids on the Interfacial Binding Properties of Phospholipase D from Vibrio parahaemolyticus

The effects of N-terminal (1–34 amino acids) and C-terminal (434–487 amino acids) amino acid sequences on the interfacial binding properties of Phospholipase D from Vibrio parahaemolyticus (VpPLD) were characterized by using monomolecular film technology. Online tools allowed the prediction of the secondary structure of the target N- and C-terminal VpPLD sequences. Various truncated forms of VpPLD with different N- or C-terminal deletions were designed, based on their secondary structure, and their membrane binding properties were examined. The analysis of the maximum insertion pressure (MIP) and synergy factor “a” indicated that the loop structure (1–25 amino acids) in the N-terminal segment of VpPLD had a positive effect on the binding of VpPLD to phospholipid monolayers, especially to 1,2-dimyristoyl-sn-glycero-3-phosphoserine and 1,2-dimyristoyl-sn-glycero-3-phosphocholine. The deletion affecting the N-terminus loop structure caused a significant decrease of the MIP and synergy factor a of the protein for these phospholipid monolayers. Conversely, the deletion of the helix structure (26–34 amino acids) basically had no influence on the binding of VpPLD to phospholipid monolayers. The deletion of the C-terminal amino acids 434–487 did not significantly change the binding selectivity of VpPLD for the various phospholipid monolayer tested here. However, a significant increase of the MIP value for all the phospholipid monolayers strongly indicated that the three-strand segment (434–469 amino acids) had a great negative effect on the interfacial binding to these phospholipid monolayers. The deletion of this peptide caused a significantly greater insertion of the protein into the phospholipid monolayers examined. The present study provides detailed information on the effect of the N- and C-terminal segments of VpPLD on the interfacial binding properties of the enzyme and improves our understanding of the interactions between this enzyme and cell membranes.

Function of C-terminal peptides on enzymatic and interfacial adsorption properties of lipase from Gibberella zeae

BACKGROUND

The crystal structure of lipase from Gibberella zeae (GZEL) indicates that its C-terminal extension is composed of a loop and a α-helix. This structure is unique, possibly providing novel evidence on lipase mechanisms.

METHODS

Two C-terminally truncated mutants (GZEL-Δ(α-helix) and GZEL-Δ(α-helix+loop)) were constructed. The role of these secondary structure segments on enzymatic activities and interfacial binding properties of GZEL was investigated by using conventional pH-stat method and monomolecular film techniques. In addition, inactive variants (Ser144Ala) of wild-type GZEL and two truncated mutants were constructed and produced specifically for interfacial binding experiments.

RESULTS

Compared to the wild-type GZEL, lipase and phospholipase activities were significantly decreased in the two mutants. Deletion of the α-helix had great influence on the lipase activity of GZEL, resulting in residual 7.3% activity; the additional deletion of the loop led to 8.1% lipase activity. As for the phospholipase function, residual activities of 63.0% and 35.4% were maintained for GZEL-Δ(α-helix) and GZEL-Δ(α-helix+loop), respectively. Findings obtained with monomolecular film experiments further indicated that the reduction in phospholipase activity occurred with the anionic phospholipid as substrate, but was not seen with zwitterionic phospholipid. Results of the maximum insertion pressure, synergy factor and binding kinetic parameters documented that the α-helix structure of GZEL strongly influence the binding and insertion of enzyme to the phospholipid monolayer. Moreover, the interfacial binding function of α-helix was partly conformed by connecting to the C-terminal of Aspergillus oryzae lipase.

GENERAL SIGNIFICANCE

Our results provide important information on the understanding of the structure-function relationship of GZEL.

Interaction of Myelin Basic Protein with Myelin-like Lipid Monolayers at Air-Water Interface

Interaction of myelin basic protein (MBP) and the cytoplasmic leaflets of the oligodendrocyte membrane is essential for the formation and compaction of the myelin sheath of the central nervous system and is altered aberrantly and implicated in the pathogenesis of neurodegenerative diseases like multiple sclerosis. To gain more detailed insights into this interaction, the adsorption of MBP to model lipid monolayers of similar composition to the myelin of the central nervous system was studied at the air-water interface with monolayer adsorption experiments. Measuring the surface pressure and the related maximum insertion pressure of MBP for different myelin-like lipid monolayers provided information about the specific role of each of the single lipids in the myelin. Depending on the ratio of negatively charged lipids to uncharged lipids and the distance between charges, the adsorption process was found to be determined by two counteracting effects: (i) protein incorporation, resulting in an increasing surface pressure and (ii) lipid condensation due to electrostatic interaction between the positively charged protein and negatively charged lipids, resulting in a decreasing surface pressure. Although electrostatic interactions led to high insertion pressures, the associated lipid condensation lowered the fluidity of the myelin-like monolayer.

Atomistic Model for Nearly Quantitative Simulations of Langmuir Monolayers

Lung surfactant and a tear film lipid layer are examples of biologically relevant macromolecular structures found at the air-water interface. Because of their complexity, they are often studied in terms of simplified lipid layers, the simplest example being a Langmuir monolayer. Given the profound biological significance of these lipid assemblies, there is a need to understand their structure and dynamics on the nanoscale, yet there are not many techniques able to provide this information. Atomistic molecular dynamics simulations would be a tool fit for this purpose; however, the simulation models suggested until now have been qualitative instead of quantitative. This limitation has mainly stemmed from the challenge to correctly describe the surface tension of water with simulation parameters compatible with other biomolecules. In this work, we show that this limitation can be overcome by using the recently introduced four-point OPC water model, whose surface tension for water is demonstrated to be quantitatively consistent with experimental data and which is also shown to be compatible with the commonly employed lipid models. We further establish that the approach of combining the OPC four-point water model with the CHARMM36 lipid force field provides nearly quantitative agreement with experiments for the surface pressure-area isotherm for POPC and DPPC monolayers, also including the experimentally observed phase coexistence in a DPPC monolayer. The simulation models reported in this work pave the way for nearly quantitative atomistic studies of lipid-rich biological structures at air-water interfaces.