Electricity generation and microbial communities in microbial fuel cell powered by macroalgal biomass

Unveiling microbial community structure and metabolic pathway over carbon cloth-titanium nitride-polyaniline biocathode for effective dichloromethane transformation

Chlorinated volatile organic compounds (Cl-VOCs) have dramatically biotoxicity and environmental persistence due to the presence of chlorine atoms, seriously jeopardizing ecological security and human health. Dichloromethane (DCM) as a model pollutant, is widely applied in solvents, extractants and cleaning agents in the pharmaceutical, chemical and food industries. In this study, highly biocompatible and conductive carbon cloth-titanium nitride-polyaniline (CC-TiN-PANI) bioelectrodes were obtained for DCM degradation in microbial electrolysis cell (MEC). The good adhesion of TiN and PANI on the electrode surface was demonstrated. The degradation kinetics were fitted by the Haldane model, compared to the CC bioelectrode (0.8 h-1), the proportion of maximum degradation rates to half-saturation concentration (Vmax/Km) of CC-TiN (1.4 h-1) and CC-TiN-PANI (2.2 h-1) bioelectrodes were enhanced by 1.8 and 2.8 times, respectively. Microbial community structure analysis illuminated that the dominant genera on the biofilm were Alicycliphilus and Hyphomicrobium, and the abundance was enhanced significantly with the modification of TiN and PANI. The dechlorination of DCM to formaldehyde could be catalyzed by DCM dehalogenase (DcmA) or by haloalkane dehalogenase (DhlA). And further oxidized to formate: 1) direct catalyzed by formaldehyde dehydrogenase (FdhA); 2) conjugated with glutathione by S-(hydroxymethyl)-glutathione synthase (Gfa), S-(hydroxymethyl)-glutathione dehydrogenase (FrmA) and S-formyl-glutathione hydrolase (FrmB); 3) conjugation with tetrahydrofolate (H4F) and/or tetrahydromethanopterin.

Batch and semi-continuous treatment of cassava wastewater using microbial fuel cells and metataxonomic analysis

The treatment of agroindustrial wastewater using microbial fuel cells (MFCs) is a technological strategy to harness its chemical energy while simultaneously purifying the water. This manuscript investigates the organic load effect as chemical oxygen demand (COD) on the production of electricity during the treatment of cassava wastewater by means of a dual-chamber microbial fuel cell in batch mode. Additionally, specific conditions were selected to evaluate the semi-continuous operational mode. The dynamics of microbial communities on the graphite anode were also investigated. The maximum power density delivered by the batch MFC (656.4 μW m- 2 ) was achieved at the highest evaluated organic load (6.8 g COD L- 1 ). Similarly, the largest COD removal efficiency (61.9%) was reached at the lowest organic load (1.17 g COD L- 1 ). Cyanide degradation percentages (50-70%) were achieved across treatments. The semi-continuous operation of the MFC for 2 months revealed that the voltage across the cell is dependent on the supply or suspension of the organic load feed. The electrode polarization resistance was observed to decreases over time, possibly due to the enrichment of the anode with electrogenic microbial communities. A metataxonomic analysis revealed a significant increase in bacteria from the phylum Firmicutes, primarily of the genus Enterococcus.

Plastic pollution and degradation pathways: A review on the treatment technologies

In recent years, the production of plastic has been estimated to reach 300 million tonnes, and nearly the same amount has been dumped into the waters. This waste material causes long-term damage to the ecosystem, economic sectors, and aquatic environments. Fragmentation of plastics to microplastics has been detected in the world's oceans, which causes a serious global impact. It is found that most of this debris ends up in water environments. Hence, this research aims to review the microbial degradation of microplastic, especially in water bodies and coastal areas. Aerobic bacteria will oxidize and decompose the microplastic from this environment to produce nutrients. Furthermore, plants such as microalgae can employ this nutrient as an energy source, which is the byproduct of microplastic. This paper highlights the reduction of plastics in the environment, typically by ultraviolet reduction, mechanical abrasion processes, and utilization by microorganisms and microalgae. Further discussion on the utilization of microplastics in the current technologies comprised of mechanical, chemical, and biological methods focusing more on the microalgae and microbial pathways via fuel cells has been elaborated. It can be denoted in the fuel cell system, the microalgae are placed in the bio-cathode section, and the anode chamber consists of the colony of microorganisms. Hence, electric current from the fuel cell can be generated to produce clean energy. Thus, the investigation on the emerging technologies via fuel cell systems and the potential use of microplastic pollutants for consumption has been discussed in the paper. The biochemical changes of microplastic and the interaction of microalgae and bacteria towards the degradation pathways of microplastic are also being observed in this review.

Pyrolyzed sediment accelerates electron transfer and regulates rhodamine B biodegradation

Electron transfer efficiency is a key factor that determined the removal of environmental pollution through biodegradation. Electron shuttles exogenously addition is one of the measures to improve the electron transfer efficiency. In this study, the sediment was pyrolyzed at different temperature to investigate its properties of mediating electron transfer and removing of rhodamine B (RhB) in microbial electrochemical systems (MESs). Sediments pyrolyzed at 300 °C (PS300) and 600 °C (PS600) have promoted electron transfer which led to 16 % enhancement of power generation while the result is reversed at 900 °C (PS900). Although power output of PS300 and PS600 are similar, the removal efficiency of RhB is not consistent, which may be caused by the biofilm structure difference. Microbial community analysis revealed that the abundance of EAB and toxicity-degrading bacteria (TDB) in PS600 was 6 % higher than that in PS300. The differentiation of microbial community also affected the metabolic pathway, the amino synthesis and tricarboxylic acid cycle were primarily upregulated with PS600 addition, which enhanced the intracellular metabolism. However, a more active cellular anabolism occurred with PS300, which may have been triggered by RhB toxicity. This study showed that pyrolytic sediment exhibits an excellent ability to mediate electron transport and promote pollutant removal at 600 °C, which provides a techno-economically feasible scenario for the utilization of low-carbon-containing solid wastes.

Electrodeposited copper enhanced removal of 2,4-dichlorophenol in batch and flow reaction in Cu@CC-PS-MFC system

Combination of microbial fuel cell (MFC) and advanced oxidation process (AOP) is promising for pollutant removal. In this paper, Cu0-loaded carbon cloth cathode by electrodeposition (Cu@CC-PS-MFC) was applied to enhance 2,4-dichlorophenol (2,4-DCP) degradation based on persulfate (PS) activation in microbial fuel cell. Cu0 exhibited a typical structure of face-centered cubic metal polyhedron on carbon cloth. The removal of 2,4-DCP by Cu@CC-PS-MFC (75.6%) was enhanced by more than 50% compared to CC-PS-MFC (49.2%) after 1 h of reaction. 30 mg/L 2,4-DCP in Cu@CC-PS-MFC was completely removed and achieved a high mineralization (80.6%) after 9 h of reaction under optimized condition with low dissolved copper ion concentration (0.615 mg/L). Meanwhile, more than 90% removal of 2,4-DCP was stably achieved with flow operation condition (hydraulic residence time of 7.2 h). The change of copper valent state Cu0/Cu2O/CuO was the main mechanism of PS activation with main reactive species of O•H and O21. The bioanode of MFC enhanced the in-situ regeneration of ≡Cu+ and ≡Cu0 on the catalyst surface by transporting electrons, which was believed to contribute to good catalyst lifetime and excellent 2,4-DCP removal. Electrodeposited copper contributes to the enhanced degradation of 2,4-DCP with energy recovery at the same time which can further broaden the application MFC.

Application of alkali-heated corncobs enhanced nitrogen removal and microbial diversity in constructed wetlands for treating low C/N ratio wastewater

Lack of carbon source is the main limiting factor in the denitrification of low C/N ratio wastewater in the constructed wetlands (CWs). Agricultural waste has been considered as a supplementary carbon source but research is still limited. To solve this problem, ferric carbon (Fe-C) + zeolite, Fe-C + gravel, and gravel were used as substrates to build CWs in this experiment, aiming to investigate the effects of different carbon sources (rice straw, corncobs, alkali-heated corncobs) on nitrogen removal performance and microbial community structure in CWs for low C/N wastewater. The results demonstrated that the microbial community and effluent nitrogen concentration of CWs were mainly influenced by the carbon source rather than the substrate. Alkali-heated corncobs significantly enhanced the removal of NO2--N, NH4+-N, NO3-N, and TN. Carbon sources addition increased microbial diversity. Alkali-heated corncobs addition significantly increased the abundance of heterotrophic denitrifying bacteria (Proteobacteria and Bacteroidota). Furthermore, alkali-heated corncobs addition increased the copy number of nirS, nosZ, and nirK genes while greenhouse gas fluxes were lower than common corncobs. In summary, alkali-heated corncobs can be considered as an effective carbon source.

Polyhydroxyalkanoate-driven current generation via acetate by an anaerobic methanotrophic consortium

Anaerobic oxidation of methane (AOM) is an important microbial process mitigating methane (CH₄) emission from natural sediments. Anaerobic methanotrophic archaea (ANME) have been shown to mediate AOM coupled to the reduction of several compounds, either directly (i.e. nitrate, metal oxides) or in consortia with syntrophic bacterial partners (i.e. sulfate). However, the mechanisms underlying extracellular electron transfer (EET) between ANME and their bacterial partners or external electron acceptors are poorly understood. In this study, we investigated electron and carbon flow for an anaerobic methanotrophic consortium dominated by 'Candidatus Methanoperedens nitroreducens' in a CH₄-fed microbial electrolysis cell (MEC). Acetate was identified as a likely intermediate for the methanotrophic consortium, which stimulated the growth of the known electroactive genus Geobacter. Electrochemical characterization, stoichiometric calculations of the system, along with stable isotope-based assays, revealed that acetate was not produced from CH₄ directly. In the absence of CH₄, current was still generated and the microbial community remained largely unchanged. A substantial portion of the generated current in the absence of CH₄ was linked to the oxidation of the intracellular polyhydroxybutyrate (PHB) and the breakdown of extracellular polymeric substances (EPSs). The ability of 'Ca. M. nitroreducens' to use stored PHB as a carbon and energy source, and its ability to donate acetate as a diffusible electron carrier expands the known metabolic diversity of this lineage that likely underpins its success in natural systems.

Increase in Electrical Parameters Using Sucrose in Tomato Waste

The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2, while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale.

Use of Banana Waste as a Source for Bioelectricity Generation

The large amounts of organic waste thrown into the garbage without any productivity, and the increase in the demand for electrical energy worldwide, has led to the search for new eco-friendly ways of generating electricity. Because of this, microbial fuel cells have begun to be used as a technology to generate bioelectricity. The main objective of this research was to generate bioelectricity through banana waste using a low-cost laboratory-scale method, achieving the generation of maximum currents and voltages of 3.71667 ± 0.05304 mA and 1.01 ± 0.017 V, with an optimal pH of 4.023 ± 0.064 and a maximum electrical conductivity of the substrate of 182.333 ± 3.51 µS/cm. The FTIR spectra of the initial and final substrate show a decrease in the peaks belonging to phenolic compounds, alkanes, and alkenes, mainly. The maximum power density was 5736.112 ± 12.62 mW/cm2 at a current density of 6.501 A/cm2 with a peak voltage of 1006.95 mV. The molecular analysis of the biofilm formed on the anode electrode identified the species Pseudomonas aeruginosa (100%), and Paenalcaligenes suwonensis (99.09%), Klebsiella oxytoca (99.39%) and Raoultella terrigena (99.8%), as the main electricity generators for this type of substrate. This research gives a second use to the fruit with benefits for farmers and companies dedicated to exporting and importing because they can reduce their expenses by using their own waste.

Microbial fuel cells with Photosynthetic-Cathodic chamber in vertical cascade for integrated Bioelectricity, biodiesel feedstock production and wastewater treatment

This study aimed to develop efficient microbial fuel cells (MFCs) for integrated bioelectricity, biodiesel feedstock production and wastewater treatment. Among wastewaters tested, MFC fed with anaerobic digester effluent from rubber industry gave the maximum power density (55.43 ± 1.08 W/m³) and simultaneously removed COD, nitrogen and phosphorus (by 72.4 ± 0.9%, 40.5 ± 0.8% and 24.4 ± 1.5%, respectively). 16S rRNA gene analysis revealed that dominant microbial communities were: Firmicutes (43.68%), Bacteroidetes (25.41%) and Chloroflexi (15.02%), which mostly contributed to bioelectricity generation. After optimizing organic loading rate, photosynthetic oleaginous microalgae were applied in cathodic chamber in order to increase oxygen availability, secondarily treat anodic chamber effluent and produce lipids as biodiesel feedstocks. Four MFCs with photosynthetic-cathodic chamber connected in vertical cascade could improve power density up to 116.9 ± 15.5 W/m³, sequentially treat wastewater, and also produce microalgal biomass (465 ± 10 g/m³) with high lipid content (38.17 ± 0.01%). These strategies may greatly contribute to sustainable development of integrated bioenergy generation and environment.

Quinones contained in wastewater as redox mediators for the synergistic removal of azo dye in microbial fuel cells

The present paper aimed to investigate the roles of quinones contained in wastewater and the enhanced effects on microbial fuel cells (MFCs) under different redox conditions. The feasibility of using wastewater rich in quinones to act as co-substrate and redox mediators (RMs) library to strengthen the synergistic removal of azo dye in MFCs was evaluated. The results demonstrated that quinones achieved enhanced effects on electricity generation and COD removal of MFC better at higher current intensity. The addition of pure quinone decreased electron transfer resistance (Rct) of MFCs from 4.76 Ω to 2.13 Ω under 1000 Ω resistance and 1.16 Ω-0.75 Ω under 50 Ω resistance. Meanwhile, higher coulombic efficiency was achieved. Compared with sodium acetate, using quinone-rich traditional Chinese medicine (TCM) wastewater as the co-substrate enhanced the synergistic removal of reactive red 2 (RR2) in MFCs from 79.58% to 92.45% during 24 h. RR2 was also degraded more thoroughly due to the accelerated electron transfer process mediated by RMs. Microbial community analysis demonstrated that the presence of quinone in TCM wastewater can enrich different exoelectrogens under varied redox conditions and thus influenced the enhanced effects on MFC. Metagenomic functional prediction results further indicated that the abundance of functional genes involved in carbohydrate metabolism, membrane transport metabolism, biofilm formation, and stress tolerance increased significantly in presence of RMs. Redundancy analyses revealed that RMs addition was the more important factor driving the variation of the microorganism community. This study revealed the potential effect of quinones as redox mediators on the bioelectrochemical system for pollutants removal.

Bio-electrochemically extracted nitrogen from residual resources for microbial protein production

Upcycling of nutrients from residual resources for producing microbial protein (MP) is an attractive method to valorize residues. In this study, we investigated bio-electrochemical methods to recover ammonia-N, for further production of MP. Reject water and digestate were used for ammonia-N recovery in microbial fuel cell (MFC) system. In one-stage process, ammonia-N recovery was 32 - 42% with 57 - 154 kJ/m³ waste stream of electricity generation. For further enhancing recovery efficiency, a two-stage process was developed, achieving efficiency of 53 - 61%. Subsequently, MP was grown with the extracted ammonia-N, and amino acid concentration was 421 and 272 mg/L under 25 °C and 35 °C, respectively. Similar essential amino acid content of MP (especially under 25 °C) with the one from fish demonstrated the attractiveness of upcycling residues to proteins. Based on simplified economic evaluation, the produced energy performed the potential to catch 1.63 - 6.54 €/m³ waste stream.

Progress in microbial fuel cell technology for wastewater treatment and energy harvesting

The global energy crisis has stimulated the development of various forms of green energy technology such as microbial fuel cells (MFCs) that can be applied synergistically and simultaneously toward wastewater treatment and bioenergy generation. This is because electricigens in wastewater can act as catalysts for destroying organic pollutants to produce bioelectricity through bacterial metabolism. In this review, the factors affecting energy production are discussed to help optimize MFC processes with respect to design (e.g., single, double, stacked, up-flow, sediment, photosynthetic, and microbial electrolysis cells) and operational conditions/parameters (e.g., cell potential, microorganisms, substrate (in wastewater), pH, temperature, salinity, external resistance, and shear stress). The significance of electron transfer mechanisms and microbial metabolism is also described to pursue the maximum generation of power by MFCs. Technically, the generation of power by MFCs is still a significant challenge for real-world applications due to the difficulties in balancing between harvesting efficiency and upscaling of the system. This review summarizes various techniques used for MFC-based energy harvesting systems. This study aims to help narrow such gaps in their practical applications. Further, it is also expected to give insights into the upscaling of MFC technology while assisting environmental scientists to gain a better understanding on this energy harvesting approach.

Co-production of hydrogen and electricity from macroalgae by simultaneous dark fermentation and microbial fuel cell

In this study, a hybrid process of dark fermentation (DF) and microbial fuel cell (MFC), sDFMFC, was investigated for simultaneous H₂ and electricity production from Saccharina japonica in a single reactor. The sDFMFC exhibited a considerably enhanced energy recovery owing to simultaneous H₂/carboxylic acids (CAs) production by DF and electricity production by MFC consuming CAs. The co-production of H₂ and electricity was confirmed by a time course of CAs concentration in sDFMFC. An excellent energy recovery of 17.3% was obtained from S. japonica with H₂ yield of 110 mL/g-VS and maximum power density of 1.82 W/m². The sDFMFC showed a diverse microbial community for a desirable microbial conversion of organic substrates. The results indicate that sDFMFC can be a promising single reactor process to produce H₂ and electricity from various biomass feedstock with considerable cost savings while ensuring the strength of the individual DF and MFC process.

The influence of external resistance on the performance of microbial fuel cell and the removal of sulfamethoxazole wastewater

Microbial fuel cells (MFCs) are promising equipment for simultaneous treatment of sewage and power generation. External resistance (R_ext) plays a crucial impact in the performance of MFCs in antibiotic wastewater treatment and antibiotic resistance genes (ARGs) reduction. In this study, R_ext and whether to add 20 mg/L sulfamethoxazole (SMX) as variables, it was observed that the performance of several chemical properties of MFCs was optimal when R_ext was 1000 Ω. The power density before and after addition of SMX was 1220.5 ± 24.5 mW/m² and 1186.2 ± 9.2 mW/m², respectively; Furthermore, the degradation rate of SMX was as high as 87.52 ± 1.97% within 48 h. High-throughput sequencing results showed that both R_ext and SMX affected the microbial community and relative abundance of the phylum and genera. Meanwhile, the MFCs with 1000 Ω R_ext generated less the targeted ARGs. Experimental results showed that 1000 Ω was the most suitable R_ext for MFCs in the treatment of antibiotic wastewater.

Recent advances on biomass-fueled microbial fuel cell

Biomass is one of the most abundant renewable energy resources on the earth, which is also considered as one of the most promising alternatives to traditional fuel energy. In recent years, microbial fuel cell (MFC) which can directly convert the chemical energy from organic compounds into electric energy has been developed. By using MFC, biomass energy could be directly harvested with the form of electricity, the most convenient, wide-spread, and clean energy. Therefore, MFC was considered as another promising way to harness the sustainable energies in biomass and added new dimension to the biomass energy industry. In this review, the pretreatment methods for biomass towards electricity harvesting with MFC, and the microorganisms utilized in biomass-fueled MFC were summarized. Further, strategies for improving the performance of biomass-fueled MFC as well as future perspectives were highlighted.

Limitation of voltage reversal in the degradation of azo dye by a stacked double-anode microbial fuel cell and characterization of the microbial community structure

In this study, two double-anode microbial fuel cells (MFCs) were connected in series for degradation of the azo dye reactive brilliant red X-3B. After the series connection, the electricity generation of one of the MFCs decreased, and the other was not affected too much. Due to the special structure in the double-anode MFC reduced the imbalanced performance between the MFC units, the occurrence of voltage reversal was limited. The removal efficiencies in two MFC reactors were not consistent after the series connection, the results showed that the MFC with the reduced electricity generation had the higher removal efficiencies, it was 12.90, 11.66, and 40.05% higher than in the MFC in which the power generation capacity was not affected after the series connection, the MFC without serial connection, and the control group, respectively. Meanwhile, the microbial communities related to the degradation of refractory organic compounds increased and related to electricity generation decreased in the MFC with the reduced electricity generation, the changes of the microbial communities were consistent with its electricity generation and the removal efficiencies. The degradation products in the effluent from two MFC units showed that had the products generated from the MFC with the reduced electricity generation had simpler structures comparing the other MFC unit.

A Novel Design Portable Plugged-Type Soil Microbial Fuel Cell for Bioelectricity Generation

Soil microbial fuel cells (SMFCs) are a promising cost-effective power source for on-demand electricity generation applications. So far, reported SMFC configurations are usually bulky and hard to setup. In this study, a low-cost portable plugged-type SMFC (PSMFC) was designed and fabricated for on-demand micropower generation. The PSMFC can be activated just by plugging into natural wet soil, which is easy to access in the natural condition. The PSMFC uses carbon-based electrodes for cost-effectiveness. After setting the PSMFC into the soil to activate, it started to produce electricity after 1 h and reached the power density of 7.3 mW/m2 after 48 h. The proposed PSMFC can potentially generate electricity for remote sensors or soil sensing systems.

Acidolysis as a biorefinery approach to producing advanced bioenergy from macroalgal biomass: A state-of-the-art review

Facing fossil fuels consumption and its accompanying environmental pollution, macroalgae, as a major part of the third-generation (3G) biomass, has great potential for bioenergy development due to its species-abundant, renewable and carbohydrate-rich properties. Diluted acid treatment is one of the most effective approaches to releasing fermentable sugars from macroalgal biomass in a short period, but the optimal conditions need to be explored to maximize the hydrolytic yield for the subsequent microbial conversion. Therefore, this review aims to summarize the latest advances in various acids and other auxiliary methods adopted to increase the hydrolytic efficiency of macroalgae. Following an overview of the strategies of different algal types, methods involved in the bioconversion of biofuels and microbial fuel cells (MFC) from algal hydrolysates are also described. For the 3G biorefinery development, the review further discusses key challenges and trends for future utilizing marine biomass to achieve the large-scale industrial production.

Diffusion-layer-free air cathode based on ionic conductive hydrogel for microbial fuel cells

High hydraulic pressure in air-cathode microbial fuel cells (MFCs) can lead to severe cathodic water leakage and power reduction, thereby hindering the practical applications of MFCs. In this study, an alternative air cathode without a diffusion layer was developed using a cross-linked hydrogel, oxidized konjac glucomannan/2-hydroxypropytrimethyl ammonium chloride chitosan (OKH), for ion bridging. The cathode was placed horizontally to avoid hydraulic pressure on its surface. Ion transportation was sustained with a minimal OKH hydrogel loading of 10 mg/cm². A maximum power density of 1.0 ± 0.04 W/m² was achieved, which was only slightly lower than the 1.28 ± 0.02 W/m² of common air cathodes. Moreover, the cost of the OKH hydrogel is only $0.12/m², which can reduce ~85% of the cathode cost without using the advanced polyvinylidene fluoride diffusion layer. Therefore, the development of this new diffusion-layer-free air cathode using conductive ionic hydrogel provides a low-cost strategy for stable MFC operation, thereby demonstrating great potential for practical applications of MFC technology.

Degradation of 2-mercaptobenzothizaole in microbial electrolysis cells: Intermediates, toxicity, and microbial communities

The compound 2-mercaptobenzothizaole (MBT) has been frequently detected in wastewater and surface water and is a potential threat to both aquatic organisms and human health (its mutagenic potential has been demonstrated). This study investigated the degradation routes of MBT in the anode of a microbial electrolysis cell (MEC) and the involved microbial communities. The results indicated that graphene-modified anodes promoted the presence of more enriched, developed, and specific communities compared to bare anodes. Moreover, consecutive additions of the OH substituent to the benzene ring of MBT were only detected in the reactor equipped with the graphene-treated electrode. Both phenomena, together with the application of an external voltage, may be related to the larger reduction of biotoxicity observed in the MEC equipped with graphene-modified anodes (46.2 eqtox∙m^-3 to 27.9 eqtox∙m^-3).

Performance evaluation of algae assisted microbial fuel cell under outdoor conditions

This study reports for the first time an operation of an outdoor algae assisted Microbial Fuel Cell (MFC). The MFC (10 L) comprised of low-cost materials like rock phosphate blended clayware & low-density polyethylene bags as anodic & cathodic chamber respectively. Algae biomass after lipid extraction at 2 g/l served as electron donor at the anode. Chlorella vulgaris at cathode provided oxygen as electron acceptor and served as lipid source. The MFCs performed well in all aspects namely energy recovery, algae productivity, and cost of operation. The 5% RP-MFCs gave 0.307 kg/m³d algal productivity, 0.09 kg/m³d lipid productivity, and 11.5318 kWh/m³ of net energy recovery (NER). Rock phosphate served as a slow and constant source of phosphorus supporting algae growth. Proteobacteria (45.14%) were the dominant phyla while Alicyliphilus (5.46%) and Dechloromonas (4.74%) were the dominant genera at the anode. The estimated cost of the system was $11.225 only.

Simultaneous removal and high tolerance of norfloxacin with electricity generation in microbial fuel cell and its antibiotic resistance genes quantification

Norfloxacin (NFLX) is a synthetic antibiotic widely used in the treatment of infectious diseases. In this work, the performance of microbial fuel cells (MFCs) toward NFLX degradation, electricity production and the antibiotics resistances genes (ARGs) generation was investigated. NFLX degradation efficiency and COD removal reached 65.5% and 94.5% respectively. The increase in NFLX concentration (128 mg/L) had no significant influence on NFLX degradation efficiency, COD removal and MFCs voltage output while the electricity was successfully generated. The quantitative polymerase chain reaction (qPCR) indicated low absolute abundances of ARGs (mdtk, mdtm, and pmra) compared with the traditional wastewater treatment plants (WWTPs). Anodic bacteria can survive in the presence of high NFLX concentration and sustain its degradation and electricity production. In terms of NFLX degradation, COD removal, diminished ARGs generation and simultaneous energy production, MFC seems to be a promising technology for antibiotics wastewater treatment with a potential to overcome the ARGs challenge.

Carbon nanomaterial-modified graphite felt as an anode enhanced the power production and polycyclic aromatic hydrocarbon removal in sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) can be used to generate electricity and remove organic contaminants. For electricity generation and contaminant removal, the anode material is one of important factors influencing the performance of SMFCs. In this study, graphene (GR), graphene oxide (GO) and carbon nanotubes (CNTs) were applied to modify the graphite felt (GF) anode in SMFCs during 110 d operation. An economical and easy modification method with the carbon nanomaterials was applied. The carbon nanomaterials increased the electrochemically active surface areas and biomass content of the anodes and correspondingly effectively enhanced the generation of electricity and the removal rates of loss on ignition (LOI) and polycyclic aromatic hydrocarbons (phenanthrene and pyrene). During the steady period from 50 d to 110 d, the GO-SMFCs favored the enrichment of EAB and thus output the highest voltages of 30.60-48.61 mV. The GR-SMFCs and GO-SMFCs generated high electric power of approximate 0.98 ± 0.14 kJ and 0.87 ± 0.04 kJ, followed by CNT-SMFCs (0.57 ± 0.06 kJ) and GF-SMFCs (0.49 ± 0.07 kJ) during the 110 d operation. The PAH degradation was not directly related to the electric current in the SMFCs. Near the anodes, the order of the phenanthrene removal rates was CNT-SMFCs (78.1%) > GR-SMFCs (73.0%) ≈ GO-SMFCs (71.2%) > GF-SMFCs (45.6%), and the order of the pyrene removal rates was GO-SMFCs (69.6%) ≈ GR-SMFCs (68.2%) ≈ CNT-SMFCs (66.7%) > GF-SMFCs (42.3%). The three carbon nanomaterials increased the microbial community diversity and slightly changed the microbial community distribution of biofilms on the anodes. Correlation analysis indicated that the degradation of phenanthrene was positively correlated with the abundances of Pseudomonas, Thauera, Diaphorobacter, Tumebacillus and Lysobacter. Pyrene degradation was strongly correlated with LOI degradation.

Enhanced denitrification and power generation of municipal wastewater treatment plants (WWTPs) effluents with biomass in microbial fuel cell coupled with constructed wetland

A microbial fuel cell-constructed wetland (MFC-CW) with water hyacinth is established to remove the nitrogen and organics from municipal wastewater treatment plants (WWTPs) effluents. Because insufficient carbon sources in influent might decrease pollutants removal efficiency and electricity generation, this research aimed to select high-quality and low-cost biomass as additional carbon source to improve the performance of MFC-CW. Cellulose and hemicellulose (xylan) were chosen as the biomass. Results indicated that xylan displayed a higher nitrate removal (above 92%) compared with cellulose (10.9%). With xylan as carbon source, the anode packing removed nitrate above 80%, while the cathode packing only removed around 50%. With glucose as sole carbon source, the maximum total nitrogen (TN) removal of MFC-CW was 87.66 ± 4.23%, which was higher than that of MFC (85.58 ± 4.14%). The chemical oxygen demand (COD) and TN in the effluent of MFC-CW were maintained below 25 mg/L and 1.5 mg/L, respectively, with the COD/TN ratio around 5.4 and hydraulic retention time (HRT) at 48 h. The TN removal reached the maximum efficiency of 88.78 ± 3.98% when glucose and xylan ratio was in 40%:60% as composite carbon sources, and COD and TN in the effluent were below 20 mg/L and 1.5 mg/L, respectively. In addition, xylan as the additional carbon source significantly promoted the power density compared with sole glucose. Microbial community diversity in the MFC-CW was significantly higher than that in the single MFC or CW. Proteobacteria and Cyanobacteria_norank were relatively more dominant in the MFC-CW than those in the single MFC or CW, which accounted for high nitrogen removal and power generation. Findings in this study proved that MFC-CW with biomass addition enhanced nitrogen removal and power generation.

Development of efficient electroactive biofilm in urine-fed microbial fuel cell cascades for bioelectricity generation

The Microbial fuel cell (MFC) technology harnesses the potential of some naturally occurring bacteria for electricity generation. Digested sludge is commonly used as the inoculum to initiate the process. There are, however, health hazards and practical issues associated with the use of digested sludge depending on its origin as well as the location for system deployment. This work reports the development of an efficient electroactive bacterial community within ceramic-based MFCs fed with human urine in the absence of sludge inoculum. The results show the development of a uniform bacterial community with power output levels equal to or higher than those generated from MFCs inoculated with sludge. In this case, the power generation begins within 2 days of the experimental set-up, compared to about 5 days in some sludge-inoculated MFCs, thus significantly reducing the start-up time. The metagenomics analysis of the successfully formed electroactive biofilm (EAB) shows significant shifts between the microbial ecology of the feeding material (fresh urine) and the developed anodic biofilm. A total of 21 bacteria genera were detected in the urine feedstock whilst up to 35 different genera were recorded in the developed biofilm. Members of Pseudomonas (18%) and Anaerolineaceae (17%) dominate the bacterial community of the fresh urine feed while members of Burkholderiaceae (up to 50%) and Tissierella (up to 29%) dominate the anodic EAB. These results highlight a significant shift in the bacterial community of the feedstock towards a selection and adaptation required for the various electrochemical reactions essential for survival through power generation.

Degradation pathways, microbial community and electricity properties analysis of antibiotic sulfamethoxazole by bio-electro-Fenton system

Sulfamethoxazole (SMX) is a general antibiotic that is frequently identified in wastewater and surface water. In this study, the degradation and metabolic pathway of SMX by bio-electro-Fenton systems equipped with a CNT/r-FeOOH cathode were investigated. When initial SMX = 25 mg/L, the removal efficiency of SMX reached 94.66% by the bio-electro-Fenton system. The concentrations of sul1, sul2, sul3, sulA, intI1 and 16S rRNA genes were examined in effluents. Four out of the six ARGs analysed were detected. Among all quantified sul genes, sul1 and sulA were the most abundant. High-throughput sequencing revealed that the microbial communities and relative abundance at the phylum and genus levels were affected by different SMX concentrations. In addition, the intermediates were detected and the possible SMX degradation pathway by the bio-electro-Fenton process in the present system was proposed. Furthermore, the highest power density obtained was 283.32 ± 16.35 mW/m² (SMX = 25 mg/L). This study provides an efficient and cost effective method for degrading antibiotics.

Exoelectrogenic Anaerobic Granular Sludge for Simultaneous Electricity Generation and Wastewater Treatment

A thick and electroactive biofilm is the key to the successful development of microbial electrochemical systems and technologies (METs). In this study, intact anaerobic granular sludge (AGS), which is a spherical and dense microbial association, was successfully demonstrated as a novel and efficient biocatalyst in METs such as microbial fuel cells. Three different strategies were explored to shift the microbial composition of AGS from methanogenic to exoelectrogenic microbes, including varying the external resistance and organic loading and manipulating the anode potential. Among all the strategies, only with positive anode potential, AGS was successfully shifted from methanogenic to exoelectrogenic conditions, as indicated by the significantly high current response (10.32 A/m²) and 100% removal of organic carbon from wastewater. Moreover, the AGS bioanode showed no significant decrease in current generation and organic removal at pH 5, indicating good tolerance of AGS to acidic conditions. Finally, 16S rRNA sequencing revealed the enrichment of exoelectrogens and inhibition of methanogens in the microbial community of AGS after anode potential control. This study provides a proof of concept for extracting electrical energy from organic wastes by exoelectrogenic AGS along with simultaneous wastewater treatment and meanwhile opens up a new paradigm to create an efficient and cost-effective exoelectrogenic biocatalyst for boosting the industrial application of METs.

Characterization of electricity generation and microbial community structure over long-term operation of a microbial fuel cell

In this study, a continuous-flow microbial fuel cell (MFC) system was constructed to treat azo dye wastewater for 400 days. The electrical properties of the MFC after 400-day operation and the removal efficiencies of the MFC after long- and short-term operation were analyzed with respect to co-substrate concentrations. The power output of the MFC system decreased from 586 to 330 mV with increasing operating time, and the removal efficiencies of the MFC remained stable after long-term operation in comparison to those after short-term operation, even when the co-substrate concentration was reduced. Analysis of the degradation products showed that products generated from long-term operation of the MFC were present at low concentrations. The microbial community analysis revealed that the relative abundance of microorganisms related to the degradation of organics in the MFC increased after long-term operation, and microorganisms related to electricity generation decreased.