Single molecular mechanics of a cholesterol-bearing pullulan nanogel at the hydrophobic interfaces

Effect of surface functionalization and loading on the mechanical properties of soft polymeric nanoparticles prepared by nano-emulsion templating

Drug and gene delivery systems based on polymeric nanoparticles offer a greater efficacy and a reduced toxicity compared to traditional formulations. Recent studies have evidenced that their internalization, biodistribution and efficacy can be affected, among other factors, by their mechanical properties. Here, we analyze by means of Atomic Force Microscopy force spectroscopy how composition, surface functionalization and loading affect the mechanics of nanoparticles. For this purpose, nanoparticles made of Poly(lactic-co-glycolic) (PLGA) and Ethyl cellulose (EC) with different functionalizations and loading were prepared by nano-emulsion templating using the Phase Inversion Composition method (PIC) to form the nano-emulsions. A multiparametric nanomechanical study involving the determination of the Young's modulus, maximum deformation and breakthrough force was carried out. The obtained results showed that composition, surface functionalization and loading affect the nanomechanical properties in a different way, thus requiring, in general, to consider the overall mechanical properties after the addition of a functionalization or loading. A graphical representation method has been proposed enabling to easily identify mechanically equivalent formulations, which is expected to be useful in the development of soft polymeric nanoparticles for pre-clinical and clinical use.

Microbial polysaccharides: An emerging family of natural biomaterials for cancer therapy and diagnostics

Microbial polysaccharides (MPs) offer immense diversity in structural and functional properties. They are extensively used in advance biomedical science owing to their superior biodegradability, hemocompatibility, and capability to imitate the natural extracellular matrix microenvironment. Ease in tailoring, inherent bio-activity, distinct mucoadhesiveness, ability to absorb hydrophobic drugs, and plentiful availability of MPs make them prolific green biomaterials to overcome the significant constraints of cancer chemotherapeutics. Many studies have demonstrated their application to obstruct tumor development and extend survival through immune activation, apoptosis induction, and cell cycle arrest by MPs. Synoptic investigations of MPs are compulsory to decode applied basics in recent inclinations towards cancer regimens. The current review focuses on the anticancer properties of commercially available and newly explored MPs, and outlines their direct and indirect mode of action. The review also highlights cutting-edge MPs-based drug delivery systems to augment the specificity and efficiency of available chemotherapeutics, as well as their emerging role in theranostics.

Immunological response of polysaccharide nanogel-incorporating PEG hydrogels in an in vivo diabetic model

Cell-based therapies hold significant advantages in comparison with the traditional drug-based or injection-based treatments. However, for long-term functional cellular implants, immune acceptance must be established. To accomplish the acceptance of the implanted cells, various biomaterial systems have been studied. Nanogels have shown great potential for modulation of cellular microenvironments, acting as a physical barrier between the immune system and the implant. However, internalization of nano-scale materials by implanted cells is not desirable and is yet to be overcome. In this study, we incorporated acrylate modified cholesterol-bearing pullulan (CHPOA) nanogels into poly (ethylene glycol) diacrylate (PEGDA) hydrogels through covalent crosslinking, where we used visible light-induced photopolymerization. We characterized morphology and swelling properties of CHPOA incorporated PEG composite hydrogels using FE-SEM and gravimetric analysis. Also, we investigated the biocompatibility properties of composite hydrogels in vivo, where we used both healthy and diabetic mice. We induced diabetes in mice using a low dose streptozotocin (STZ) injections and implanted composite hydrogels in both diabetic and healthy mice through subcutaneous route. Immune cell infiltration of the retrieved tissue was examined through histological analysis, where we observed minimum immune response levels of 0-2 rareness, according to ISO standard of biological evaluation of medical devices. Our observation suggests that the composite hydrogel developed here can be used to introduce nanostructured domains into bulk hydrogels and that this system has potential to be used as immunologically acceptable composite material in cellular therapy without internalization of nanoparticles.

NANO-BIOTECHNOLOGY AND ITS INNOVATIVE PERSPECTIVE IN DIABETES MANAGEMENT

Diabetes occurs due to the imbalance of glucose in the body known as glucose homeostasis, thus leading to metabolic changes in the body. The two stages hypoglycemia or hyperglycemia classify diabetes into various categories. Various bio-nanotechnological approaches are coupled up with nano particulates, polymers, liposome, various gold plated and solid lipid particulates, regulating transcellular transport, non specific cellular uptake, and paracellular transport, leading to oral, trans-dermal , pulmonary, buccal , nasal , specific gene oriented administration to avoid the patient's non compliance with the parental routes of administration. Phytochemicals are emerging strategies for the future prospects of diabetes management.

Strategies to load therapeutics into polysaccharide-based nanogels with a focus on microfluidics: A review

Nowadays nanoparticles are increasingly investigated for the targeted and controlled delivery of therapeutics, as suggested by the high number of research articles (2400 in 2000 vs 8500 in 2020). Among them, almost 2% investigated nanogels in 2020. Nanogels or nanohydrogels (NGs) are nanoparticles formed by a swollen three-dimensional network of synthetic polymers or natural macromolecules such as polysaccharides. NGs represent a highly versatile nanocarrier, able to deliver a number of therapeutics. Currently, NGs are undergoing clinical trials for the delivery of anti-cancer vaccines. Herein, the strategies to load low molecular weight drugs, (poly)peptides and genetic material into polysaccharide NGs as well as to formulate NGs-based vaccines are summarized, with a focus on the microfluidics approach.

Pullulan in biomedical research and development - A review

Pullulan is an imperative microbial exo-polymer commercially produced by yeast like fungus Aureobasidium pullulans. Its structure contains maltosyl repeating units which comprises two α-(1 → 4) linked glucopyranose rings attached to one glucopyranose ring through α-(1 → 6) glycosidic bond. The co-existence of α-(1 → 6) and α-(1 → 4) glycosidic linkages endows distinctive physico-chemical properties to pullulan. It is highly biocompatible, non-toxic and non-carcinogenic in nature. It is extremely resistant to any mutagenicity or immunogenicity. The unique properties of pullulan make it a potent candidate for biomedical applications viz. drug delivery, gene delivery, tissue engineering, molecular chaperon, plasma expander, vaccination, etc. This review highlights the potential of pullulan in biomedical research and development.

Research progress of self-assembled nanogel and hybrid hydrogel systems based on pullulan derivatives

Polymer nano-sized hydrogels (nanogels) as drug delivery carriers have been investigated over the last few decades. Pullulan, a nontoxic and nonimmunogenic hydrophilic polysaccharide derived from fermentation of black yeast like Aureobasidium pullulans with great biocompatibility and biodegradability, is one of the most attractive carriers for drug delivery systems. In this review, we describe the preparation, characterization, and 'switch-on/off' mechanism of typical pullulan self-assembled nanogels (self-nanogels), and then introduce the development of hybrid hydrogels that are numerous resources applied for regenerative medicine. A major section is used for biomedical applications of different nanogel systems based on modified pullulan, which exert smart stimuli-responses at ambient conditions such as charge, pH, temperature, light, and redox. Pullulan self-nanogels have found increasingly extensive application in protein delivery, tissue engineering, vaccine development, cancer therapy, and biological imaging. Functional groups are incorporated into self-nanogels and contribute to expressing desirable results such as targeting and modified release. Various molecules, especially insoluble or unstable drugs and encapsulated proteins, present improved solubility and bioavailability as well as reduced side effects when incorporated into self-nanogels. Finally, the advantages and disadvantages of pullulan self-nanogels will be analyzed accordingly, and the development of pullulan nanogel systems will be reviewed.

A user-friendly herbicide derived from photo-responsive supramolecular vesicles

Paraquat, as one of the most widely used herbicides globally, is highly toxic to humans, and chronic exposure and acute ingestion leads to high morbidity and mortality rates. Here, we report user-friendly, photo-responsive paraquat-loaded supramolecular vesicles, prepared via one-pot self-assembly of amphiphilic, ternary host-guest complexes between cucurbit[8]uril, paraquat, and an azobenzene derivative. In this vesicle formulation, paraquat is only released upon UV or sunlight irradiation that converts the azobenzene derivative from its trans- to its cis- form, which in turn dissociates the ternary host-guest complexations and the vesicles. The cytotoxicity evaluation of this vesicle formulation of paraquat on in vitro cell models, in vivo zebrafish models, and mouse models demonstrates an enhanced safety profile. Additionally, the PQ-loaded vesicles' herbicidal activity against a model of invasive weed is nearly identical to that of free paraquat under natural sunlight. This study provides a safe yet effective herbicide formulation.

Oxidoreductase-Initiated Radical Polymerizations to Design Hydrogels and Micro/Nanogels: Mechanism, Molding, and Applications

Due to their 3D cross-linked networks and tunable physicochemical properties, polymer hydrogels with different sizes are applied widely in tissue engineering, drug-delivery systems, pollution regulation, ionic conducting electrolytes, agricultural drought-resistance, cosmetics, and the food industry. Novel, environmentally friendly, and efficient oxidoreductase-initiated radical polymerizations to design hydrogels and micro/nanogels have gained increasing attention. Herein, the recent advances on the use of novel enzyme-initiated systems for hydrogel polymerization, including the mechanisms, and molding of polymeric and hybrid-polymeric networks are reviewed. Preliminary progress related to interfacial enzymatic polymerization for the generation of hybrid micro/nanogels is introduced as an emerging initiating approach. In addition, certain biological applications in tissue engineering, bioimaging, and therapy are demonstrated step by step. Finally, some perspectives on the safety profile of enzymatic formed hydrogels, new enzymatic systems, and potential theranostic applications are discussed.

Sequential Coating of Insulin Secreting Beta Cells within Multilayers of Polysaccharide Nanogels

Pancreatic islet transplantation has emerged as a promising treatment for type-1 diabetes (T1D); however, its clinical application is still limited by the life-long use of immunosuppressive drugs, insufficient number of islets to achieve normoglycemia, and large transplantation volume. This paper reports a unique approach for nanothin coating of insulin secreting beta cell aggregates. The coating is based on hydrophobic and covalent interactions between natural acrylate modified cholesterol bearing pullulan (CHPOA) nanogels and MIN6 beta cell aggregates. Beta cell aggregates are prepared as spheroids through hanging drop method, which is optimized with respect to hanging drop volume and initial number of beta cells. These aggregates, defined as pseudoislets, are coated with sequential layers of nanogels and are evaluated as viable and functional for insulin secretion. Coating experiments are carried out using physiologically compatible medium, where pseudoislets are not brought in contact with toxic prepolymer solutions used in existing approaches. This study offers new opportunities through coating of islets with advanced functional materials under completely physiological conditions for clinical translation of cell transplantation technology. The technique developed here will establish a new paradigm for creating tolerable grafts for other chronic diseases such as anemia, cancer, central nervous system (CNS) diseases.

Basic concepts and recent advances in nanogels as carriers for medical applications

Nanogels in biomedical field are promising and innovative materials as dispersions of hydrogel nanoparticles based on crosslinked polymeric networks that have been called as next generation drug delivery systems due to their relatively high drug encapsulation capacity, uniformity, tunable size, ease of preparation, minimal toxicity, stability in the presence of serum, and stimuli responsiveness. Nanogels show a great potential in chemotherapy, diagnosis, organ targeting and delivery of bioactive substances. The main subjects reviewed in this article concentrates on: (i) Nanogel assimilation in the nanomedicine domain; (ii) Features and advantages of nanogels, the main characteristics, such as: swelling capacity, stimuli sensitivity, the great surface area, functionalization, bioconjugation and encapsulation of bioactive substances, which are taken into account in designing the structures according to the application; some data on the advantages and limitations of the preparation techniques; (iii) Recent progress in nanogels as a carrier of genetic material, protein and vaccine. The majority of the scientific literature presents the multivalency potential of bioconjugated nanogels in various conditions. Today's research focuses over the overcoming of the restrictions imposed by cost, some medical requirements and technological issues, for nanogels' commercial scale production and their integration as a new platform in biomedicine.

Microencapsulation of Ascorbic Acid for Cosmetic by Utilizing Self-assembly of Phase Separated Polymer

Micrometer-sized polymer particles encapsulated ascorbic acid (vitamin C; VC) were successfully prepared by the three types of the self-assembling method, those are, phase separation and self-assembly of added polymer at the oil-water interface in emulsion, microsuspension polymerization utilizing the self-assembling of phase separated polymer (SaPSeP) method, and their hybrid method. In the stability study at 50°C for 2 months, the three kinds of capsule particles exhibited effective protection of VC from the interaction with other components in cosmetic consisting of water-in-oil (W/O) emulsion. The encapsulated VC was easily released from the capsule particles by an excess of water. These encapsulation methods will be useful for the stabilization of water-soluble substances in cosmetic consisting of W/O emulsion.

Dynamic light scattering of xanthan gum biopolymer in colloidal dispersion

The dynamical properties of nanogels of xanthan gum (XG) with hydrodynamic radius controlled in a size range from 5 nm to 35 nm, were studied at the different XG concentrations in water/sodium bis-2-ethylhexyl-sulfosuccinate (AOT)/decane reverse micelles (RMs) vs. mass fraction of nano-droplet (MFD) at W = 40, using dynamic light scattering (DLS). The diffusion study of nanometer-sized droplets by DLS technique indicated that enhancing concentration of the XG polysaccharide resulted in exchanging the attractive interaction between nano-gels to repulsive interaction, as the mass fraction of nano-droplets increased. The reorientation time (τr ) of water nanodroplets decreased with MFD for water-in-oil AOT micro-emulsion comprising high concentration (0.0000625) of XG. On the other hand, decreasing concentration of biopolymer led to increasing the rotational correlation time of water nanodroplets with MFD. In conclusion, a single relaxation curve was observed for AOT inverse microemulsions containing different XG concentrations. Furthermore, the interaction between nanogels was changed from attractive to repulsive versus concentration of XG in the AOT RMs.

Waterborne physically crosslinked antimicrobial nanogels

Aqueous solutions of poly(ethylene imine) functionalized with decyl- and azetidinium groups form physically cross-linked antimicrobial nanogels.

Novel imaging technologies for characterization of microbial extracellular polysaccharides

Understanding of biology is underpinned by the ability to observe structures at various length scales. This is so in a historical context and is also valid today. Evolution of novel insight often emerges from technological advancement. Recent developments in imaging technologies that is relevant for characterization of extraceullar microbiological polysaccharides are summarized. Emphasis is on scanning probe and optical based techniques since these tools offers imaging capabilities under aqueous conditions more closely resembling the physiological state than other ultramicroscopy imaging techniques. Following the demonstration of the scanning probe microscopy principle, novel operation modes to increase data capture speed toward video rate, exploitation of several cantilever frequencies, and advancement of utilization of specimen mechanical properties as contrast, also including their mode of operation in liquid, have been developed on this platform. Combined with steps in advancing light microscopy with resolution beyond the far field diffraction limit, non-linear methods, and combinations of the various imaging modalities, the potential ultramicroscopy toolbox available for characterization of exopolysaccharides (EPS) are richer than ever. Examples of application of such ultramicroscopy strategies range from imaging of isolated microbial polysaccharides, structures being observed when they are involved in polyelectrolyte complexes, aspects of their enzymatic degradation, and cell surface localization of secreted polysaccharides. These, and other examples, illustrate that the advancement in imaging technologies relevant for EPS characterization supports characterization of structural aspects.

Polysaccharide nanoparticles for protein and Peptide delivery: exploring less-known materials

Finding adequate carriers for protein and peptide delivery has become an urgent need, owing to the growing number of macromolecules identified as having therapeutic potential. Nanoparticles have emerged in the field as very promising vehicles and much work has been directed to testing the capacity of different materials to compose the matrix of these carriers. Natural materials and, specifically, polysaccharides have been taking the forefront of the challenge, because of several favoring properties that include the higher propensity to exhibit biodegradability and biocompatibility, and also the high structural flexibility. The majority of works found in the literature regarding polysaccharide nanoparticles uses very popular materials like chitosan or hyaluronic acid. This review is aimed at describing and exploring the potential of polysaccharides that are not so well known or that are less explored. For those, the main properties will be described, together with an overview of the reported applications as nanoparticle matrix materials.

Self-assembled nanoparticles of glycyrrhetic acid-modified pullulan as a novel carrier of curcumin

Glycyrrhetic acid (GA)-modified pullulan nanoparticles (GAP NPs) were synthesized as a novel carrier of curcumin (CUR) with a degree of substitution (DS) of GA moieties within the range of 1.2-6.2 groups per hundred glucose units. In the present study, we investigated the physicochemical characteristics, release behavior, in vitro cytotoxicity and cellular uptake of the particles. Self-assembled GAP NPs with spherical shapes could readily improve the water solubility and stability of CUR. The CUR release was sustained and pH-dependent. The cellular uptake of CUR-GAP NPs was confirmed by green fluorescence in the cells. An MTT study showed CUR-GAP NPs with higher cytotoxicity in HepG2 cells than free CUR, but GAP NPs had no significant cytotoxicity. GAP is thus an excellent carrier for the solubilization, stabilization, and controlled delivery of CUR.

Noncovalent interaction-assisted polymeric micelles for controlled drug delivery

Various individual or synergistic noncovalent interactions were employed to mediate polymeric micelles for controlled drug delivery.

Natural and synthetic biomaterials for controlled drug delivery

A wide variety of delivery systems have been developed and many products based on the drug delivery technology are commercially available. The development of controlled-release technologies accelerated new dosage form design by altering pharmacokinetic and pharmacodynamics profiles of given drugs, resulting in improved efficacy and safety. Various natural or synthetic polymers have been applied to make matrix, reservoir or implant forms due to the characteristics of polymers, especially ease of control for modifications of biocompatibility, biodegradation, porosity, charge, mechanical strength and hydrophobicity/hydrophilicity. Hydrogel is a hydrophilic, polymeric network capable of imbibing large amount of water and biological fluids. This review article introduces various applications of natural and synthetic polymer-based hydrogels from pharmaceutical, biomedical and bioengineering points of view.

Effect of pullulan nanoparticle surface charges on HSA complexation and drug release behavior of HSA-bound nanoparticles

Nanoparticle (NP) compositions such as hydrophobicity and surface charge are vital to determine the presence and amount of human serum albumin (HSA) binding. The HSA binding influences drug release, biocompatibility, biodistribution, and intercellular trafficking of nanoparticles (NPs). Here, we prepared 2 kinds of nanomaterials to investigate HSA binding and evaluated drug release of HSA-bound NPs. Polysaccharides (pullulan) carboxyethylated to provide ionic derivatives were then conjugated to cholesterol groups to obtain cholesterol-modified carboxyethyl pullulan (CHCP). Cholesterol-modified pullulan (CHP) conjugate was synthesized with a similar degree of substitution of cholesterol moiety to CHCP. CHCP formed self-aggregated NPs in aqueous solution with a spherical structure and zeta potential of -19.9 ± 0.23 mV, in contrast to -1.21 ± 0.12 mV of CHP NPs. NPs could quench albumin fluorescence intensity with maximum emission intensity gradually decreasing up to a plateau at 9 to 12 h. Binding constants were 1.12 × 10(5) M(-1) and 0.70 × 10(5) M(-1) to CHP and CHCP, respectively, as determined by Stern-Volmer analysis. The complexation between HSA and NPs was a gradual process driven by hydrophobic force and inhibited by NP surface charge and shell-core structure. HSA conformation was altered by NPs with reduction of α-helical content, depending on interaction time and particle surface charges. These NPs could represent a sustained release carrier for mitoxantrone in vitro, and the bound HSA assisted in enhancing sustained drug release.

DNA separation by cholesterol-bearing pullulan nanogels

We present an application of a novel DNA separation matrix, cholesterol-bearing pullulan (CHP) nanogels, for microchip electrophoresis. The solution of the CHP showed a unique phase transition around 30 mg∕ml and formed gel phase over this critical concentration. This gel phase consists of the weak hydrophobic interactions between the cholesterols could be easily deformed by external forces, and thus, loading process of the CHP nanogels into microchannels became easier. The high concentration of the CHP nanogels provided excellent resolutions especially for small DNA fragments from 100 to 1500 bp. The separation mechanism was discussed based on Ogston and Reptation models which had developed in gels or polymer solutions. The result of a single molecule imaging gave us an insight of the separation mechanism and the nanogel structures as well.

An efficient esterification of pullulan using carboxylic acid anhydrides activated with iodine

Acylation of alcohols (esterification) with anhydride is an important and routinely utilized transformation in organic synthesis. Iodine is a cheap and one of the most powerful anhydride activating agents for the esterification of alcohols. Therefore, an efficient and cost effective method was developed for the acylation of pullulan polysaccharide by using different acid anhydrides activated with iodine. A series of organo-soluble pullulan esters were successfully synthesized, purified and characterized. Under solvent free conditions, it was feasible to fabricate pullulan nonaacetate and pullulan stearate. Attachment (covalent) of the pendant groups onto polymer backbone was verified by spectroscopic techniques. All of the products were characterized by using thermal analysis, FTIR and 1H NMR spectroscopy.

Micro/nanostructured polymeric systems for biomedical and pharmaceutical applications

This review provides an outline of the polymeric micro/nanostructured advanced systems that are suited for the controlled and targeted administration of, specifically, nonconventional drugs. The contribution of new trends in drug-delivery technology is focused on two major parts, dealing with brief surveys of: the biodegradable/bioerodible polymeric systems used in the formulation of micro/nanoparticles and techniques used in the preparation of micro/nanoparticles for their biomedical application in cancer treatment specifically, in inflammation pathologies, as oxygen carriers (blood substitutes) and in tissue-engineering practice. A small discussion of the future perspectives of the described systems is also given.

Polysaccharide hydrogels for modified release formulations

Hydrogels are three-dimensional, hydrophilic, polymeric networks, with chemical or physical cross-links, capable of imbibing large amounts of water or biological fluids. Among the numerous macromolecules that can be used for hydrogel formation, polysaccharides are extremely advantageous compared to synthetic polymers being widely present in living organisms and often being produced by recombinant DNA techniques. Coming from renewable sources, polysaccharides also have frequently economical advantages over synthetic polymers. Polysaccharides are usually non-toxic, biocompatible and show a number of peculiar physico-chemical properties that make them suitable for different applications in drug delivery systems. We review here a selection of the most important polysaccharides that have been studied and exploited in several fields related to pharmaceutics. Particular attention has been focused on the techniques used for the hydrogel network preparation, on the drug delivery results, on clinical applications as well as on the possible use of such systems as scaffolds for tissue engineering.

In vitro Stimulation of CD8 and CD4 T Cells by Dendritic Cells Loaded with a Complex of Cholesterol-Bearing Hydrophobized Pullulan and NY-ESO-1 Protein: Identification of a New HLA-DR15–Binding CD4 T-Cell Epitope

PURPOSE

NY-ESO-1 belongs to a class of cancer/testis antigens and has been shown to be immunogenic in cancer patients. We synthesized a complex of cholesterol-bearing hydrophobized pullulan and NY-ESO-1 protein (CHP/ESO) and investigated the in vitro stimulation of CD8 and CD4 T cells from peripheral blood mononuclear cells in healthy donors with autologous CHP/ESO-loaded dendritic cells as antigen-presenting cells.

EXPERIMENTAL DESIGN

In vitro stimulation of CD8 or CD4 T cells was determined by IFNgamma ELISPOT assays against autologous EBV-B cells infected with vaccinia/NY-ESO-1 recombinant virus or wild-type vaccinia virus as targets and by ELISA measuring secreted IFNgamma.

RESULTS

NY-ESO-1-specific CD8 and CD4 T cells were induced. In a donor expressing HLA-A2, CD8 T cells stimulated with CHP/ESO-loaded dendritic cells recognized naturally processed NY-ESO-1(157-165), an HLA-A2-binding CD8 T cell epitope. NY-ESO-1 CD4 T cells were Th1-type. We identified a new HLA-DR15-binding CD4 T cell epitope, NY-ESO-1(37-50).

CONCLUSIONS

These findings indicate that CHP/ESO is a promising polyvalent cancer vaccine targeting NY-ESO-1.

Thermoresponsive Controlled Association of Protein with a Dynamic Nanogel of Hydrophobized Polysaccharide and Cyclodextrin: Heat Shock Protein-Like Activity of Artificial Molecular Chaperone

Dynamic CHP-CD nanogels, which consisted of a self-assembly of cholesteryl-group-bearing pullulan (CHP) and beta-cyclodextrin (CD), were characterized by SEC and SEC-MALS methods. The nanogels prevented the thermal aggregation of carbonic anhydrase B (CAB) by selective trapping of the heat-denatured protein. After the complex between the CHP-CD nanogels and CAB was cooled, the enzyme activity of CAB spontaneously recovered upon release from the complex. The dynamic nanogels self-regulated an association of heat denatured protein and dissociation of native protein depending on the concentration of CD. The thermal stability of CAB was improved by thermoresponsive controlled association between the proteins and the artificial molecular chaperone.

Hard-tissue-engineered zirconia porous scaffolds with hydroxyapatite sol-gel and slurry coatings

A zirconia (ZrO(2)) porous scaffold was coated with a gradient apatite layer to induce osteoconductivity with the use of a combination of sol-gel and powder slurry methods. The ZrO(2) was used to impart mechanical strength and the apatite layer was coated for functional biocompatibility. The coating layer, from the outside in, was composed of sol-gel hydroxyapatite (HA)/slurry HA/slurry FA. The sol-gel coating powder had a lower crystallinity than the slurry coating powder. The sol-gel HA coating over the HA/FA slurry coating layer made the surface very smooth. The sol-gel coating over the slurry coating layer enhanced the bonding strength up to 33 MPa. The dissolution rate of the sol-gel/slurry coating layer was much higher than that of the slurry coating. Moreover, the rate could be controlled by altering the heat-treatment temperature of the sol-gel HA layer. The MG63 cells cultured on these materials grew and spread in a different manner, depending on the coating layer. However, the proliferation rates of the cells on both coating systems were not much different.