Physically crosslinked alginate/N,O-carboxymethyl chitosan hydrogels with calcium for oral delivery of protein drugs

Novel hybrid system based on carboxymethyl chitosan hydrogel encapsulating drug loaded nanoparticles for prolonged release of Vancomycin in the treatment of bacterial infection

Current bacterial infections clinical treatments, such as intravenous antibiotic administration and local injection, suffer from short action duration, repeated administrations, and severe cell toxicity. To address these limitations, it is imperative to develop sustained drug release system with prolonged antimicrobial effects. In this work, a hybrid system was prepared using EDC/NHS catalyzed crosslinking-based carboxymethyl chitosan (CMCS) hydrogel as a carrier to encapsulate biodegradable nanoparticles (NPs) loaded with vancomycin, an efficient antibacterial drug. First, ring opening polymerization of L-lactide or L-lactide/glycolide mixture was performed in the presence of poly(ethylene glycol) (PEG) to yield PEG-PLA or PEG-PLGA block copolymers. Vancomycin was loaded in PEG-PLA or PEG-PLGA NPs using double emulsion method. Drug-loaded NPs were then encapsulated in the CMCS hydrogel. Drug release from NPs, CMCS hydrogel and hybrid NPs-hydrogel systems was performed, and release kinetics were analyzed using Korsmeyer-Peppas model. The established hybrid system exhibited prolonged drug release without burst release. Finally, the biocompatibility of the hybrid system was evidenced by the MTT, hemolysis, dynamic clotting time, and zebrafish embryotoxicity tests. Last but not least, the hybrid system displayed outstanding long-lasting antimicrobial activity as shown by co-culture with Monoclonal S. aureus, thus suggesting great potential for applications in bacterial infection treatment.

Precisely controlled electrostatically sprayed sodium alginate/carboxymethyl chitosan hydrogel microbeads as super-adsorbent for adsorption of cationic dye

In this pioneering study, electrostatic spraying (ES) technology with high voltages is proposed to reduce the size of hydrogel microbeads further, aiming to enhance the adsorption rate of cationic methylene blue (MB) dye. The increased voltages, ranging from 0.0 to 13.0 kV, further decreased the size of electrostatically sprayed hydrogel microbeads crosslinked by hydrogen bonds between sodium alginate (SA) and carboxymethyl chitosan (CMCS) in hydrochloric acid. The size of SA/CMCS hydrogel microbeads was successfully reduced from 2000 ± 121 μm (SC-2000) to 400 ± 15 μm (SC-400). Notably, SC-400 exhibits the highest maximum adsorption capacity (qm) and rate constant (k2) at 840.3 mg/g and 0.0598 g/mg/min, respectively, at pH 9.0 and a temperature of 25 °C in the absence of ionic compounds, which is three times higher than that of SC-2000, due to their high specific surface area and pore volume. Through a series of adsorption studies and characterization analyses, SA/CMCS hydrogel microbeads displayed heterogeneous adsorption behaviors towards MB dye through electrostatic interactions between the deprotonated carboxylic groups and cationic MB molecules, where MB adsorption efficiency could be significantly influenced by pH and ionic strength. These findings suggest that ES technology is effective in synthesizing smaller SA/CMCS hydrogel microbeads with enhanced MB removal rates and stable adsorption capacities and their applications could be further explored for removing other organic dyes and toxic metals in subsequent research studies.

Optimization of alginate/carboxymethyl chitosan microbeads for the sustained release of celecoxib and attenuation of intestinal inflammation in vitro

Multiple anti-inflammatory medications have helped treat inflammatory bowel disease (IBD). However, oral administration has minimal absorption and systemic side effects. This study aims to investigate the potential of encapsulating anti-inflammatory drug celecoxib (Cele) within microbeads for the treatment of IBD. Microbeads were formed by cross-linking carboxymethyl chitosan (CMCs) with sodium alginate (Alg) through the ionic gelation method and optimized through response surface methodology. Additionally, the study revealed a mucoadhesivity value of 59.32 ± 0.74 % for the optimized microbead system. The drug release study demonstrated the sustained release of Cele CMCs/Alg microbeads upto 24 h compared to quick release of the free drug. The results of the cell viability assay indicated that the Cele-Alg/CMCs microbeads exhibited a non-toxic nature within the concentration range of 100-250 μM. A significant decrease in nitric oxide (NO) generation (61.14 ± 3.67 %) was seen in HCT-116 cells stimulated with lipopolysaccharide (LPS) upon treatment with Cele-250μM/CMCs/Alg microbeads. The results of the reactive oxygen species and wound healing assay suggest that Cele-250μM/CMCs/Alg microbeads had improved anti-inflammatory characteristics comparable to those of free drug treatment. The western blot analysis demonstrated that the microbeads composed of CMCs/Alg-Cele possess the capacity to inhibit the expression of COX-2 in vitro supressing inflammation.

Recent advances in chitosan-based smart hydrogel for drug delivery systems

Achieving sustainable and controllable drug delivery is a highly effective disease treatment approach. Chitosan hydrogels, with their unique three-dimensional (3D) porous structures, offer tunable capacity, controllable degradation, various stimuli sensitivities, and the ability to encapsulate therapeutic agents. These characteristics provide chitosan hydrogels with inherent advantages as vehicles for drug delivery systems. In recent years, there has been a notable shift toward embracing the "back-to-nature" ethos, with biomass materials emerging as promising candidates for constructing chitosan hydrogels used in controlled drug release applications. This trend is sustained by their biodegradability, biocompatibility, and non-toxic properties, emphasizing their unique benefits and innovative features. These hydrogels exhibit sensitivity to various factors such as temperature, pH, ion concentration, light, magnetic fields, redox, ultrasound, and multi-responsiveness, offering opportunities for finely tuned drug release mechanisms. This review comprehensively outlines fabrication methods, properties, and biocompatibility of chitosan hydrogel, as well as modification strategies and stimuli-responsive mechanisms. Furthermore, their potential applications in subcutaneous (wound dressing), parental (transdermal drug delivery), oral (gastrointestinal tract), and facial (ophthalmic and brain) drug delivery are briefly discussed. The challenges in clinical application and the future outlook of chitosan-based smart hydrogel are also highlighted.

A novel macroporous carboxymethyl chitosan/sodium alginate sponge dressing capable of rapid hemostasis and drug delivery

Carboxymethyl chitosan (CMCS) and sodium alginate (SA), which are excellent polysaccharide-based hemostatic agents, are capable of forming polyelectrolyte complexes (PEC) through electrostatic interactions. However, CMCS/SA PEC sponges prepared by the conventional sol-gel process exhibited slow liquid absorption rate and poor mechanical properties post-swelling. In this work, a novel strategy involving freeze casting followed by acetic acid vapor treatment to induce electrostatic interactions was developed to fabricate novel PEC sponges with varying CMCS/SA mass ratios. Compared to sol-gel process sponge, the novel sponge exhibited a higher density of electrostatic interactions, resulting in denser pore walls that resist re-gelation and swelling according to FTIR, XRD, and SEM analyses. Additionally, the liquid absorption kinetics, as well as compression and tension tests, demonstrated that the novel sponge had significantly improved rapid blood absorption capacity and mechanical properties. Furthermore, in vitro coagulation and drug release studies showed that the novel sponge had a lower blood clotting index and clotting time, along with a slower drug release rate after loading with berberine hydrochloride, showcasing its potential as a rapid hemostatic dressing with controlled drug release capabilities.

Advances in Stimuli-Responsive Chitosan Hydrogels for Drug Delivery Systems

Sustainable and controllable drug transport is one of the most efficient ways of disease treatment. Due to high biocompatibility, good biodegradability, and low costs, chitosan and its derivatives are widely used in biomedical fields. Specifically, chitosan hydrogel enables drugs to pass through biological barriers because of their abundant amino and hydroxyl groups that can interact with human tissues. Moreover, the multi-responsive nature (pH, temperature, ions strength, and magnetic field, etc.) of chitosan hydrogels makes precise drug release a possibility. Here, the synthesis methods, modification strategies, stimuli-responsive mechanisms of chitosan-based hydrogels, and their recent progress in drug delivery are summarized. Chitosan hydrogels that carry and release drugs through subcutaneous (dealing with wound dressing), oral (dealing with gastrointestinal tract), and facial (dealing with ophthalmic, ear, and brain) are reviewed. Finally, challenges toward clinic application and the future prospects of stimuli-responsive chitosan-based hydrogels are indicated.

Fabrication of yeast β-glucan/sodium alginate/γ-polyglutamic acid composite particles for hemostasis and wound healing

Particles with a porous structure can lead to quick hemostasis and provide a good matrix for cell proliferation during wound healing. Recently, many particle-based wound healing materials have been clinically applied. However, these products show good hemostatic ability but with poor wound healing ability. To solve this problem, this study fabricated APGG composite particles using yeast β-glucan (obtained from Saccharomyces cerevisiae), sodium alginate, and γ-polyglutamic acid as the starting materials. The structure of yeast β-glucan was modified with many carboxymethyl groups to obtain carboxymethylated β-glucan, which could coordinate with Ca2+ ions to form a crosslinked structure. A morphology study indicated that the APGG particles showed an irregular spheroidal structure with a low density (<0.1 g cm-3) and high porosity (>40%). An in vitro study revealed that the particles exhibited a low BCI value, low hemolysis ratio, and good cytocompatibility against L929 cells. The APGG particles could quickly stop bleeding in a mouse liver injury model and exhibited better hemostatic ability than the commercially available product Celox. Furthermore, the APGG particles could accelerate the healing of non-infected wounds, and the expression levels of CD31, α-SMA, and VEGF related to angiogenesis were significantly enhanced.

Preparation, characterization and drug release properties of pH sensitive Zingiber officinale polysaccharide hydrogel beads

The aim of this study was to prepare a drug carrier that could deliver oral insulin to the intestine. A hydrogel beads composed of sodium carboxymethyl cellulose (CMC), Zingiber offtcinale polysaccharide (ZOP) and chitosan (CS) were prepared by ionic gel method as insulin carrier. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning electron microscopy (SEM) and thermogravimetric (TGA) showed that the hydrogel was formed by metal ion coordination between ZOP and CMC and Fe3+, and CS was coated on the surface of the hydrogel ball in the form of non covalent bond. The results showed that the swelling process of hydrogel spheres has significant pH sensitivity. In addition, the hydrogel beads successfully coated insulin, and the drug loading rate (DL) of (ZOP/CMC-Fe3+)@CS could reach 69.43 ± 7.32 mg/g, and the entrapment efficiency (EE) could reach 66.94 ± 7.43 %. In vitro release experiments, the release rate of (CMC/ZOP-Fe3+)@CS in simulated gastric fluid (SGF) for 2 h was <20 %, and the cumulative release rate of insulin after 9 h in simulated intestinal fluid (SIF) reached over 90 %. The results showed that the hydrogel beads prepared in this work could be used as a potential carrier for delivering oral insulin.

Prevention of Hypercholesterolemia with "Liposomes in Microspheres" Composite Carriers: A Promising Approach for Intestinal-Targeted Oral Delivery of Astaxanthin

Cardiovascular diseases are caused by hypercholesterolemia. Astaxanthin (AST) has been reported to exhibit antioxidant and anti-inflammatory properties. However, its bioavailability is poor because of low solubility and instability. In order to improve the bioavailability of AST, we developed an intestinal-responsive composite carrier termed as "liposomes in micropheres" incorporating N-succinyl-chitosan (NSC)-poly(ethylene glycol) (PEG) liposomes that functionalized by neonatal Fc receptors (FcRn) into hydrogels of sodium alginate (SA) and carboxymethyl chitosan (CMCS). In the AST NSC/HSA-PEG liposomes@SA/CMCS microspheres, the AST's encapsulation efficiency (EE) was 96.26% (w/w) and its loading capacity (LC) was 6.47% (w/w). AST NSC/HSA-PEG liposomes had stability in the gastric conditions and achieved long-term release of AST in intestinal conditions. Then, AST NSC/HSA-PEG liposomes@SA/CMCS bind to intestinal epithelial cell targets by the neonatal Fc receptor. In vitro permeation studies show that there was a 4-fold increase of AST NSC/HSA-PEG liposomes@SA/CMCS in AST permeation across the intestinal epithelium. Subsequent in vivo experiments demonstrated that the composite carrier exhibited a remarkable mucoadhesive capacity, allowing for extended intestinal retention of up to 12 h, and it displayed deep penetration through the mucus layer, efficiently entering the intestinal villi epithelial cells, and enhancing the absorption of AST and its bioavailability in vivo. And oral administration of AST NSC/HSA-PEG liposomes@SA/CMCS could effectively prevent hypercholesterolemia caused by a high-fat, high-cholesterol diet (HFHCD). These advancements highlight the potential of NSC/HSA-PEG liposomes@SA/CMCS composite carriers for targeted and oral uptake of hydrophobic bioactives.

Selenium nanoparticles/carboxymethyl chitosan/alginate antioxidant hydrogel for treating steroid-induced osteonecrosis of the femoral head

Oxidative stress plays a crucial role in steroid-induced osteonecrosis of the femoral head (SONFH). Although several antioxidant strategies have been investigated for treating SONFH, their antioxidant efficiencies and therapeutic effects remain unsatisfactory. Here, we developed a selenium nanoparticles/carboxymethyl chitosan/alginate (SeNPs/CMC/Alg) antioxidant hydrogel and evaluated its ability to treat SONFH. In vitro assays indicated that the SeNPs/CMC/Alg hydrogel exhibited excellent properties, such as low cytotoxicity, sustained SeNPs release, and favorable antioxidant activity. Under oxidative stress, the SeNPs/CMC/Alg hydrogel promoted reactive oxygen species (ROS) elimination and enhanced the osteogenic and proangiogenic abilities of bone marrow mesenchymal stem cells (BMSCs). After establishing a rabbit model of SONFH, the SeNPs/CMC/Alg hydrogel was transplanted into the femoral head after core decompression (CD) surgery. Radiographic and histological analyses revealed that the hydrogel treatment alleviated SONFH by eliminating ROS and promoting osteogenesis and angiogenesis compared to those in the CD and CMC/Alg groups. In vitro and in vivo studies indicated that the Wnt/β-catenin signaling pathway was activated by the SeNPs/CMC/Alg hydrogel in both hydrogen peroxide-conditioned BMSCs and necrotic femoral heads. These findings indicate that local transplantation of the SeNPs/CMC/Alg hydrogel is beneficial for treating SONFH, as it promotes ROS elimination and activation of the Wnt/β-catenin signaling pathway.

Development of hydrogel-based composite scaffolds containing eggshell particles for bone regeneration applications

This study describes the development and characterization of novel composite scaffolds, made of an alginate-chitosan hydrogel matrix containing eggshell (ES) particles, for bone tissue engineering applications. Scaffolds with ES particles, either untreated or treated with phosphoric acid to create a nanotextured particle surface, were compared to scaffolds without particles. Results indicate that the nanotexturing process exposed occluded ES proteins orthologous to those in human bone extracellular matrix. Scaffolds with ES or nanotextured ES (NTES) particles had a higher porosity (81 ± 4% and 89 ± 5%, respectively) than scaffolds without particles (59 ± 5%) (p = .002 and p < .001, respectively). Scaffolds with NTES particles had a larger median pore size (113 μm [interquartile range [IQ]: 88-140 μm]) than scaffolds with ES particles (94 μm [IQ: 75-112 μm]) and scaffolds without particles (99 μm [IQ: 74-135 μm]) (p < .001 and p = .011, respectively). The compressive modulus of the scaffolds with ES or NTES particles remained low (3.69 ± 0.70 and 3.14 ± 0.62 kPa, respectively), but these scaffolds were more resistant to deformation following maximum compression than those without particles. Finally, scaffolds with ES or NTES particles allowed better retention of human mesenchymal stem cells during seeding (53 ± 12% and 57 ± 8%, respectively, vs. 17 ± 5% for scaffolds without particles; p < .001 in both cases), as well as higher cell viability up to 21 days of culture (67 ± 17% and 61 ± 11%, respectively, vs. 15 ± 7% for scaffolds without particles; p < .001 in both cases). In addition, alkaline phosphatase (ALP) activity increased up to 558 ± 164% on day 21 in the scaffolds with ES particles, and up to 567 ± 217% on day 14 in the scaffolds with NTES particles (p = .006 and p = .002, respectively, relative to day 0). Overall, this study shows that the physicochemical properties of the alginate-chitosan hydrogel scaffolds with ES or NTES particles are similar to those of cancellous bone. In addition, scaffolds with particles supported early osteogenic differentiation and therefore represent a promising new bone substitute, especially for non-load bearing applications.

Engineered cyclodextrin-based supramolecular hydrogels for biomedical applications

Cyclodextrin (CD)-based supramolecular hydrogels are polymer network systems with the ability to rapidly form reversible three-dimensional porous structures through multiple cross-linking methods, offering potential applications in drug delivery. Although CD-based supramolecular hydrogels have been increasingly used in a wide range of applications in recent years, a comprehensive description of their structure, mechanical property modulation, drug loading, delivery, and applications in biomedical fields from a cross-linking perspective is lacking. To provide a comprehensive overview of CD-based supramolecular hydrogels, this review systematically describes their design, regulation of mechanical properties, modes of drug loading and release, and their roles in various biomedical fields, particularly oncology, wound dressing, bone repair, and myocardial tissue engineering. Additionally, this review provides a rational discussion on the current challenges and prospects of CD-based supramolecular hydrogels, which can provide ideas for the rapid development of CD-based hydrogels and foster their translation from the laboratory to clinical medicine.

Double network structure via ionic bond and covalent bond of carboxymethyl chitosan and poly(ethylene glycol): Factors affecting hydrogel formation

The factors were studied that affect the formation of DN hydrogel, which was prepared using a water-based, environmental-friendly system. The DN hydrogel was designed and prepared based on a cross-linked, polysaccharide-based, polymer carboxymethyl chitosan (CMCS) via an ionic crosslinking reaction for the first network structure. UV irradiation created a radical crosslinking reaction of poly(ethylene glycol) from a double bond at the chain end for the second network structure. It was found that the optimum hydrogel was produced using 9.5 %v/v of 1000PEGGMA, CMCS 5%w/v, and CaCl₂ 3%w/v. The results showed the highest percentage of the gel fraction was 87.84 % and the hydrogel was stable based on its rheological properties. Factors affecting the hydrogel formation were the concentration and molecular weight of PEGGMA and the concentrations of CMCS and calcium chloride (CaCl₂). The DN hydrogel had bioactivity due to its octacalcium phosphate (OCP) hydroxyapatite crystal form. In addition, the composite DN scaffold with a conductive polymer of chitosan-grafted-polyaniline (CS-g-PANI) had conduction of 2.33 × 10^-5 S/cm when the concentration of CS-g-PANI was 3 mg/ml, confirming the semi-conductive nature of the material. All the results indicated that DN hydrogel could be a candidate to apply in tissue-engineering applications.

Cancer Immunotherapy Using Bioengineered Micro/Nano Structured Hydrogels

Hydrogels, a class of materials with a 3D network structure, are widely used in various applications of therapeutic delivery, particularly cancer therapy. Micro and nanogels as miniaturized structures of the bioengineered hydrogels may provide extensive benefits over the common hydrogels in encapsulation and controlled release of small molecular drugs, macromolecular therapeutics, and even cells. Cancer immunotherapy is rapidly developing, and micro/nanostructured hydrogels have gained wide attention regarding their engineered payload release properties that enhance systemic anticancer immunity. Additionally, they are a great candidate due to their local administration properties with a focus on local immune cell manipulation in favor of active and passive immunotherapies. Although applied locally, such micro/nanostructured can also activate systemic antitumor immune responses by releasing nanovaccines safely and effectively inhibiting tumor metastasis and recurrence. However, such hydrogels are mostly used as locally administered carriers to stimulate the immune cells by releasing tumor lysate, drugs, or nanovaccines. In this review, the latest developments in cancer immunotherapy are summarized using micro/nanostructured hydrogels with a particular emphasis on their function depending on the administration route. Moreover, the potential for clinical translation of these hydrogel-based cancer immunotherapies is also discussed.

A Review of the Mechanism, Properties, and Applications of Hydrogels Prepared by Enzymatic Cross-linking

Hydrogels, as biological materials, are widely used in food, tissue engineering, and biomedical applications. Nevertheless, many issues remain in the preparation of hydrogels by physical and chemical methods, such as low bioaffinity, weak mechanical properties, and unstable structures, which also limit their applications in other fields. However, the enzymatic cross-linking method has the advantages of high catalytic efficiency, mild reaction conditions, and the presence of nontoxic substances. In this review, we evaluated the chemical, physical, and biological methods of preparing hydrogels and introduced three common cross-linking enzymes and their principles for preparing hydrogels. This review introduced the applications and properties of hydrogels prepared by the enzymatic method and also provided some suggestions regarding the current situation and future development of hydrogels prepared by enzymatic cross-linking.

Functionalized chitosan and sodium alginate for the effective removal of recalcitrant organic pollutants

In this work, the study of an oxidative-coupling reaction by immobilization of laccase or horseradish peroxidase (HRP) onto chitosan and sodium alginate was reported. The oxidative-coupling reaction of three recalcitrant organic pollutants (ROPs) such as chlorophenol compounds including 2,4-dichlorophenol (DCP), 2,4,6- trichlorophenol (TCP), pentachlorophenol (PCP) was studied. The results showed that the systems with immobilized laccase or horseradish peroxidase had broader range of optimum pH and temperature when compared to that of free laccase and horseradish peroxidase. The removal efficiencies of DCP, TCP and PCP within 6 h were found to be 77 %, 90 % and 83 %, respectively. The rate constants of the first order reactions for laccase were arranged as 0.30 h^-1 (TCP) > 0.13 h^-1 (DCP) > 0.11 h^-1 (PCP) and the rate constants for HRP were arranged as 0.42 h^-1 (TCP) > 0.32 h^-1 (PCP) > 0.25 h^-1 (DCP). The removal rate of TCP was found to be the highest among all and the removal efficiency of ROPs by HRP was always better than that of laccase. The major products of the reaction were identified by LC-MS and confirmed as humic-like polymers.

A self-healable metallohydrogel for drug encapsulations and drug release

A self-healable metallohydrogel (MOG) of Mn(ii) has been prepared using a low molecular weight gelator, Na₂HL {H₃L = l-(3,5-di-tert-butyl-2-hydroxy-benzyl)amino aspartic acid}. The MOG has been characterized by MALDI TOF mass spectrometry, rheological studies, IR spectroscopy, and microscopic techniques. Non-steroidal anti-inflammatory drug (NSAID), indomethacin (IND) and anti-cancer drug gemcitabine (GEM) were encapsulated into the metallohydrogel. The GEM-loaded metallogel (MOG_GEM) shows better delivery and more adverse cytotoxicity than the drug against breast cancer cell lines MDA-MB-468 and 4T1. The anti-cancer property was evaluated with in vitro MTT cytotoxic assay, live-dead assay and cell migration assay. In vitro cytotoxicity assay against RAW 264.7 cell line with the treatment of MOG_IND shows the improved anti-inflammatory response in the case of MOG_IND compared to the drug alone.

Amino acid modified OCMC-g-Suc-β-CD nanohydrogels carrying lapatinib and ginsenoside Rg1 exhibit high anticancer activity in a zebrafish model

Nanohydrogels show great potential as efficient drug carriers due to their biocompatibility, low toxicity, and high water absorbability. In this paper, we prepared two O-carboxymethylated chitosan (OCMC)-based polymers functionalized with β-cyclodextrin (β-CD) and amino acid. The structures of the polymers were characterized by Fourier Transform Infrared (FTIR) Spectroscopy. Morphological study was carried out on a Transmission Electron Microscope (TEM), and the results indicated that the two polymers had irregular spheroidal structure with some pores distributed on their surface. The average particle diameter was below 500 nm, and the zeta potential was above +30 mV. The two polymers were further used for preparing nanohydrogels loaded with anticancer drugs lapatinib and ginsenoside Rg1, and the resulting nanohydrogels showed high drug loading efficiency and pH-sensitive (pH = 4.5) drug release behavior. In vitro cytotoxicity investigation revealed that the nanohydrogels exhibited high cytotoxicity against lung cancer (A549) cells. In vivo anticancer investigation was performed in a transgenic Tg(fabp10:rtTA2s-M2; TRE2:EGFP-kras ^V12) zebrafish model. The results showed that the synthesized nanohydrogels significantly inhibited the expression of EGFP-kras ^v12 oncogene in zebrafish liver, and the L-arginine modified OCMC-g-Suc-β-CD nanohydrogels loading lapatinib and ginsenoside Rg1 showed the best results.

Rotenone encapsulated in pH-responsive alginate-based microspheres reduces toxicity to zebrafish

Rotenone is a botanical pesticide and has long been used for control of insect pests and also as a natural piscicide for management of fish populations in many countries. Field application for pest control, however, often encounters the movement of rotenone into surface water due to spray drift or surface runoff after rainfall, which could potentially result in water pollution and unexpected death of fishes. To minimize its effect on freshwater and the problem of fish dying, one solution was to encapsulate rotenone in specific microspheres, limiting its release and reducing its toxicity since rotenone can be quickly degraded under sunlight. In this study, pH-responsive alginate-based microspheres were synthesized to encapsulating rotenone, which were designated as rotenone beads. The rotenone beads, along with alginate beads (devoid of rotenone) were characterized and evaluated for their responses to pH and effects on zebrafish. Results showed that the microspheres had high loading efficiency (4.41%, w/w) for rotenone, and rotenone beads well responded to solution pH levels. The cumulative release rates of rotenone from the beads were 27.91%, 42.72%, and 90.24% at pH 5.5, 7.0, and 9.0, respectively. Under acidic conditions, the rotenone release rate was lower due to hydrogen bonding. On the contrary, rotenone became more quickly released at the high pH due to intermolecular repulsion. The toxicity of rotenone beads to zebrafish and fish embryos at a pH of 5.5 was reduced by 2- and 4-fold than chemical rotenone. Since pH levels in most freshwater lakes, ponds, and streams vary from 6 to 8, rotenone release from the beads in such freshwater could be limited. Thus, the synthesized rotenone beads could be relatively safely used for pest control with limited effects on freshwater fishers.

Bioprinting of alginate-carboxymethyl chitosan scaffolds for enamel tissue engineeringin vitro

Tissue engineering offers a great potential in regenerative dentistry and to this end, three dimensional (3D) bioprinting has been emerging nowadays to enable the incorporation of living cells into the biomaterials (such a mixture is referred as a bioink in the literature) to create scaffolds. However, the bioinks available for scaffold bioprinting are limited, particularly for dental tissue engineering, due to the complicated, yet compromised, printability, mechanical and biological properties simultaneously imposed on the bioinks. This paper presents our study on the development of a novel bioink from carboxymethyl chitosan (CMC) and alginate (Alg) for bioprinting scaffolds for enamel tissue regeneration. CMC was used due to its antibacterial ability and superior cell interaction properties, while Alg was added to enhance the printability and mechanical properties as well as to regulate the degradation rate. The bioinks with three mixture ratios of Alg and CMC (2-4, 3-3 and 4-2) were prepared, and then printed into the calcium chloride crosslinker solution (100 mM) to form a 3D structure of scaffolds. The printed scaffolds were characterized in terms of structural, swelling, degradation, and mechanical properties, followed by theirin vitrocharacterization for enamel tissue regeneration. The results showed that the bioinks with higher concentrations of Alg were more viscous and needed higher pressure for printing; while the printed scaffolds were highly porous and showed a high degree of printability and structural integrity. The hydrogels with higher CMC ratios had higher swelling ratios, faster degradation rates, and lower compressive modulus. Dental epithelial cell line, HAT-7, could maintain high viability in the printed constructs after 1, 7 and 14 d of culture. HAT-7 cells were also able to maintain their morphology and secrete alkaline phosphatase after 14 d of culture in the 3D printed scaffolds, suggesting the capacity of these cells for mineral deposition and enamel-like tissue formation. Among all combinations Alg4%-CMC2% and in a less degree 2%Alg-4%CMC showed the higher potential to promote ameloblast differentiation, Ca and P deposition and matrix mineralizationin vitro. Taken together, Alg-CMC has been illustrated to be suitable to print scaffolds with dental epithelial cells for enamel tissue regeneration.

Encapsulation of Human-Bone-Marrow-Derived Mesenchymal Stem Cells in Small Alginate Beads Using One-Step Emulsification by Internal Gelation: In Vitro, and In Vivo Evaluation in Degenerate Intervertebral Disc Model

Cell microencapsulation in gel beads contributes to many biomedical processes and pharmaceutical applications. Small beads (<300 µm) offer distinct advantages, mainly due to improved mass transfer and mechanical strength. Here, we describe, for the first time, the encapsulation of human-bone-marrow-derived mesenchymal stem cells (hBM-MSCs) in small-sized microspheres, using one-step emulsification by internal gelation. Small (127−257 µm) high-mannuronic-alginate microspheres were prepared at high agitation rates (800−1000 rpm), enabling control over the bead size and shape. The average viability of encapsulated hBM-MSCs after 2 weeks was 81 ± 4.3% for the higher agitation rates. hBM-MSC-loaded microspheres seeded within a glycosaminoglycan (GAG) analogue, which was previously proposed as a mechanically equivalent implant for degenerate discs, kept their viability, sphericity, and integrity for at least 6 weeks. A preliminary in vivo study of hBM-MSC-loaded microspheres implanted (via a GAG-analogue hydrogel) in a rat injured intervertebral disc model demonstrated long-lasting viability and biocompatibility for at least 8 weeks post-implantation. The proposed method offers an effective and reproducible way to maintain long-lasting viability in vitro and in vivo. This approach not only utilizes the benefits of a simple, mild, and scalable method, but also allows for the easy control of the bead size and shape by the agitation rate, which, overall, makes it a very attractive platform for regenerative-medicine applications.

Recent development in fabrication and evaluation of phenolic-dietary fiber composites for potential treatment of colonic diseases

Phenolics have been shown by in vitro and animal studies to have multiple pharmacological effects against various colonic diseases. However, their efficacy against colonic diseases, such as inflammatory bowel diseases, Crohn's disease, and colorectal cancer, is significantly compromised due to their chemical instability and susceptibility to modification along the gastrointestinal tract (GIT) before reaching the colonic site. Dietary fibers are promising candidates that can form phenolic-dietary fiber composites (PDC) to carry phenolics to the colon, as they are natural polysaccharides that are non-digestible in the upper intestinal tract but can be partially or fully degradable by gut microbiota in the colon, triggering the release at this targeted site. In addition, soluble and fermentable dietary fibers confer additional health benefits as prebiotics when used in the PDC fabrication, and the possibility of synergistic relationship between phenolics and fibers in alleviating the disease conditions. The functionalities of PDC need to be characterized in terms of their particle characteristics, molecular interactions, release profiles in simulated digestion and colonic fermentation to fully understand the metabolic fate and health benefits. This review examines recent advancements regarding the approaches for fabrication, characterization, and evaluation of PDC in in vitro conditions.

Facile synthesis of pH-responsive sodium alginate/carboxymethyl chitosan hydrogel beads promoted by hydrogen bond

In this work, a novel synthesis strategy of sodium alginate/carboxymethyl chitosan hydrogel beads promoted by hydrogen bond was described. The beads were prepared by dropping the blends of two polymers into the citric acid solution. Besides hydrogen bonding, electrostatic interactions were also involved in the formation of the hydrogel beads. The thermal stability experiments revealed that the more the content of carboxymethyl chitosan, the better the thermal stability of the beads. The beads exhibited excellent pH sensitivity, pH reversibility, and lactoferrin loading capacity. The swelling ratio of the bead and its protein releasing profile was pH-dependent, which could prevent premature protein release in the gastric environment. Also, the circular dichroism results demonstrated that lactoferrin could maintain its structure during the loading and releasing process. The obtained results revealed that the hydrogel beads prepared in this work could be used as a potential protein carrier for oral delivery.

Gastric acid-response chitosan/alginate/tilapia collagen peptide composite hydrogel: Protection effects on alcohol-induced gastric mucosal injury

Long-term excessive alcohol intake can easily lead to gastritis, gastric ulcer, and gastric bleeding. In this paper, the gastric acid-responsive hydrogel of CS-NAC/alginate/tilapia collagen peptide (CS-NAC/ALG/TCP) was developed. Its structure and properties were determined. The alcohol-induced gastric mucosal injury models in mice were established to evaluate the protective effects of CS-NAC/ALG/TCP. The results showed that CS-NAC/ALG/TCP was successfully fabricated, and it showed a sustained release of TCP, strong mucoadhesion, and excellent biodegradability in vitro. In the animal experiments, CS-NAC/ALG/TCP improved the oxidative stress status of the gastric mucosa by increasing the levels of SOD, GSH, and CAT in tissues. It also down-regulated the expression of MPO, TNF-α, IL-1β, and IL-6, and increased the production of gastric protective factors such as PGE2 and NO in mouse stomach, thereby reducing the alcohol-induced inflammation and protecting the gastric mucosal injury. Besides, CS-NAC/ALG/TCP can also increase the activities of alcohol metabolism enzymes to improve alcohol metabolism, thereby reducing alcoholic damage. In conclusion, CS-NAC/ALG/TCP is a promising candidate for the treatment of alcohol-induced gastric injury.

Microparticles coated with proteins in their natural state and in vitro gastrointestinal simulation

Abstract This study aimed to produce pectin and alginate microparticles by ionic gelation coated with different concentrations of bovine blood and egg white protein in their natural state. The coated microparticles were characterized, and their physical resistance and morphology were evaluated, as well as the released protein during in vitro gastrointestinal simulation. The highest protein adsorption (65.47%) was shown by pectin microparticles coated with bovine blood (10%), regardless of the protein type and concentration used. Likewise, higher amounts of adsorbed protein resulted as protein concentration increased, regardless of the type of microparticle. Nevertheless, the physical resistance of coated microparticles was affected more by the type of polysaccharide, being alginate microparticles more resistant. Adsorbed proteins on microparticles surface showed higher solubility values in vitro gastrointestinal simulation regardless of protein type. Bovine blood and egg white proteins in their natural state can be used as alternative coating materials for microparticles.

Review of Recent Advances and Their Improvement in the Effectiveness of Hydrogel-Based Targeted Drug Delivery: A Hope for Treating Cancer

Using hydrogels for delivering cancer therapeutics is advantageous in pharmaceutical usage as they have an edge over traditional delivery, which is tainted due to the risk of toxicity that it imbues. Hydrogel usage leads to the development of a more controlled drug release system owing to its amenability for structural metamorphosis, its higher porosity to seat the drug molecules, and its ability to shield the drug from denaturation. The thing that makes its utility even more enhanced is that they make themselves more recognizable to the body tissues and hence can stay inside the body for a longer time, enhancing the efficiency of the delivery, which otherwise is negatively affected since the drug is identified by the human immunity as a foreign substance, and thus, an attack of the immunity begins on the drug injected. A variety of hydrogels such as thermosensitive, pH-sensitive, and magnetism-responsive hydrogels have been included and their potential usage in drug delivery has been discussed in this review that aims to present recent studies on hydrogels that respond to alterations under a variety of circumstances in "reducing" situations that mimic the microenvironment of cancerous cells.

Advanced biomedical hydrogels: molecular architecture and its impact on medical applications

Hydrogels are cross-linked polymeric networks swollen in water, physiological aqueous solutions or biological fluids. They are synthesized by a wide range of polymerization methods that allow for the introduction of linear and branched units with specific molecular characteristics. In addition, they can be tuned to exhibit desirable chemical characteristics including hydrophilicity or hydrophobicity. The synthesized hydrogels can be anionic, cationic, or amphiphilic and can contain multifunctional cross-links, junctions or tie points. Beyond these characteristics, hydrogels exhibit compatibility with biological systems, and can be synthesized to render systems that swell or collapse in response to external stimuli. This versatility and compatibility have led to better understanding of how the hydrogel's molecular architecture will affect their physicochemical, mechanical and biological properties. We present a critical summary of the main methods to synthesize hydrogels, which define their architecture, and advanced structural characteristics for macromolecular/biological applications.

Alginate enriched with phytic acid for hydrogels preparation. Therapeutic applications

In the last decade, numerous innovative strategies have been used to obtain highly efficient synthetic or semi-synthetic biomaterials. Between these innovative biomaterials, hydrogels occupy a distinct place due to their superior biological and physico-chemical characteristics. Alginate is a natural linear polysaccharide with important physico-chemical and biological properties. Recently, we obtained a new hydrogel based on alginate and phytic acid with improved physico-chemical properties. In the present study, the hydrogels previously obtained were tested in terms of their biological properties and possibilities of use in the biomedical field. For this purpose, the hydrogels were loaded with norfloxacin (NRF), an antibacterial compound utilised in the treatment against Gram-negative and Gram-positive organisms. Unfortunately, NRF has low solubility and permeability. In order to provide protection against loss, but also for enhanced bioavailability, and controlled-release of norfloxacin, a drug inclusion complex with cyclodextrin was realized. The effect of complexation on the release profile was highlighted. The addition of NRF to the hydrogel matrices greatly improved the antibacterial activity of the tested compounds. The presence of CD did not affect the homogeneity of the drug distribution. Changes in the polymeric matrix structure were registered after the incorporation of the drug, which were attributed to the relaxation of the network subsequently to the penetration and diffusion of the drug solution simultaneously with the swelling process. The release of NRF from Alg_PA polymeric network has been successfully modulated by the use of CD as a host molecule.

Preparation of MSZ Hydrogel and Its Treatment of Colitis

In order to control the release of mesalazine (MSZ) in the gastrointestinal tract to achieve better pharmacological effects in the colon, in this study, MSZ was added to hydroxypropyl-β-cyclodextrin (HP-β-CD) to form a water-soluble HP-β-CD/MSZ inclusion complex. Then, the inclusion compound was loaded into the structure of the bilayer polyelectrolyte complex microsphere formed by alginate (Alg), chitosan (Cs), and kappa carrageenan (κ-Car) as the hydrogel carrier, and the hydrogel beads with colon-specific release MSZ after oral administration were formed. The formed hydrogel beads have different swelling capabilities in different pH media and have the greatest swelling degree under pH 7.4. The encapsulation efficiency and drug loading of hydrogel beads can reach up to 83.23 and 18.31%, respectively, and the size of hydrogel beads can be reduced to less than 1 mm after drying, so that the size of oral administration can be reached. In vivo experiments also showed that the formed hydrogel beads had a better therapeutic effect on colitis than free drugs, and the microspheres were biodegradable, so the double-layer pH-sensitive microspheres could be effectively used in colon-targeting drug delivery.

Preparation and characterization of a dual cross-linking injectable hydrogel based on sodium alginate and chitosan quaternary ammonium salt

The development of cheap and easily available injectable hydrogel is an urgent problem in the field of biomedical engineering. Herein, we used chitosan quaternary ammonium salt and sodium alginate to prepare a dual crosslinking hydrogel. The hydrogel formed in-situ crosslinking and can be injected continuously. Interestingly, the formed hydrogel possessed a homogeneous 3D network structure and exhibited reasonable mechanical properties. Moreover, the hydrogels had excellent injectability, and the compression strength of the hydrogel (Gel-0.5) was up to 27.65 kPa. Additionally, the hydrogel showed good biocompatibility that evaluated by cytotoxicity. Notably, the hydrogel was nontoxic toward NIH-3T3 cells. In summary, the hydrogel we produced can be used as an ideal biomaterial for further applications in the field of biomedical engineering.

pH-sensitive polymer-based carriers as a useful approach for oral delivery of therapeutic protein: A review

There are many proteins and enzymes in the human body, and their dysfunction can lead to disease. The use of proteins as a drug is common in various diseases such as diabetes. Proteins are hydrophilic molecules whose spatial structure is critical to their correct function. There are different ways to the administration of proteins. Protein structures are degraded by gastric acid and enzymes in the gastrointestinal tract and have a slight ability to permeation from the gastrointestinal epithelium due to their large hydrophilic nature. Therefore, their oral use has limitations. Since the oral use of drugs is one of the best and easiest routes for patients, many studies have been done to increase the stability, penetration and ultimately increase the bioavailability of proteins through oral administration. One of the studied strategies for oral delivery of protein is the use of pH-sensitive polymer-based carriers. These carriers use different pH-sensitive polymers such as eudragit®, chitosan, dextran, and alginate. The use of pH-sensitive polymer-based carriers by protecting the protein from stomach acid (low pH) and degrading enzymes, increasing permeability, and maintaining the spatial structure of the protein leads to increased bioavailability. In this review, we focus on the various polymers used to prepare pH-sensitive polymer-based carriers for the oral delivery of proteins.

Novel synthesis of natural cation exchange resin by crosslinking the sodium alginate as a natural polymer with 1,6-hexamethylene diisocyanate in inert solvents: Characteristics and applications

Novel synthesis of natural polymeric cation exchanger from sodium alginate reagent as natural polymer (CAlg-Na)_n has been developed. This procedure takes place by crosslinking the solid sodium alginate with 1,6-hexamethylene diisocyanate (HDI) in dryness benzene as inert solvent (DB). The experimental results for crosslinking the alginate using different degrees of crosslinking of HDI/DB (w/w) showed that the capacity of the synthesized resin for binding the polyvalent metal ions reached its maximum at 30% of (HDI/D) ratio. This work aims to present a novel synthesis of cation exchange resin from natural polymers as an alternative promising competitor of low-cost, high performance and non-toxicity for removal of the toxic heavy metal ions in wastewater remediation and radionuclide pollutants from environmental contaminated media. The results obtained from various applied techniques for determining the bounded metal ion concentrations with (CAlg-Na)_n indicated that the resin capacity was followed the order U(VI) > Cu(II) > Sr(II) > Ca(II) at 25 °C, respectively. The factors influenced the alginate affinity for chelating the metal ions were explained in some correlation terms between the alginate capacity and some physicochemical properties of chelated metal ions and its respective formed complexes. Speculated geometrical configurations for chelation were suggested and discussed.

Examining the effect of bovine serum albumin on the properties and drug release behavior of β-lactoglobulin-derived amyloid fibril-based hydrogels

Herein, we report the use of β-lactoglobulin (β-LG) combined with bovine serum albumin (BSA) for the preparation of amyloid-based hydrogels with aim of delivering riboflavin. The incorporation of BSA enhanced β-LG fibrillogenesis and protected β-LG fibrils from losing fibrillar structure due to the pH shift. The mechanical properties of hydrogels were observed to be positively correlated with the number of amyloid fibrils. While the addition of BSA induced amyloid fibril formation, its presence between the fibril chains interfered with the entanglement of fibril chains, thus adversely affecting the hydrogels' mechanical properties. Hydrogels' surface microstructure became more compact as the number of amyloid fibrils rose and the presence of BSA could improve hydrogels' surface homogeneity. In vitro riboflavin (RF) release rate was found to be correlated with the number of fibrils and BSA-RF binding affinity. However, when the digestive enzymes were present, the influence of BSA-RF affinity was alleviated due to enzymes' destructive and/or degradative effects on BSA and/or hydrogels, thus the release rate relied on the number of fibrils, which could be adjusted by the amount of BSA. Results indicate that the additional component, BSA, plays an important role in modulating the properties and functions of β-LG fibril-based hydrogels.

A facile, versatile hydrogel bioink for 3D bioprinting benefits long-term subaqueous fidelity, cell viability and proliferation

Both of the long-term fidelity and cell viability of three-dimensional (3D)-bioprinted constructs are essential to precise soft tissue repair. However, the shrinking/swelling behavior of hydrogels brings about inadequate long-term fidelity of constructs, and bioinks containing excessive polymer are detrimental to cell viability. Here, we obtained a facile hydrogel by introducing 1% aldehyde hyaluronic acid (AHA) and 0.375% N-carboxymethyl chitosan (CMC), two polysaccharides with strong water absorption and water retention capacity, into classic gelatin (GEL, 5%)-alginate (ALG, 1%) ink. This GEL-ALG/CMC/AHA bioink possesses weak temperature dependence due to the Schiff base linkage of CMC/AHA and electrostatic interaction of CMC/ALG. We fabricated integrated constructs through traditional printing at room temperature and in vivo simulation printing at 37°C. The printed cell-laden constructs can maintain subaqueous fidelity for 30 days after being reinforced by 3% calcium chloride for only 20 s. Flow cytometry results showed that the cell viability was 91.38 ± 1.55% on day 29, and the cells in the proliferation plateau at this time still maintained their dynamic renewal with a DNA replication rate of 6.06 ± 1.24%. This work provides a convenient and practical bioink option for 3D bioprinting in precise soft tissue repair.

Microfluidic-based synthesized carboxymethyl chitosan nanoparticles containing metformin for diabetes therapy: In vitro and in vivo assessments

This work was aimed to synthesize novel crosslinked carboxymethyl chitosan nanoparticles (CMCS NPs) containing metformin hydrochloride (MET) using microfluidics (MF) and evaluate their performance for diabetes therapy. The field emission-scanning electron microscopy (FE-SEM) images and dynamic light scattering (DLS) results showed that the NPs average size was 77 ± 19 nm with a narrow size distribution. They exhibited a high encapsulation efficiency (∼90 %) and the controlled drug release while crosslinking using CaCl₂. Eventually, the in vivo assessments dedicated an increased body weight up to 7.94 % and a decreased blood glucose level amount of 43.58 % for MF MET-loaded CMCS NPs with respect to the free drug in diabetic rats. Also, the results of histopathological studies revealed the size of the pancreatic islets to be 2.32 μm² and β cells intensity to be 64 cells per islet for the diabetic rats after treating with the MF-based sample. These data were close to those obtained for the healthy rats.

Biobased dynamic hydrogels by reversible imine bonding for controlled release of thymopentin

Thymopentin (TP5) is widely used in the treatment of autoimmune diseases, but the short in vivo half-life of TP5 strongly restricts its clinical applications. A series of blank and TP5 loaded hydrogels were synthesized via reversible dual imine bonding by mixing water soluble O-carboxymethyl chitosan (CMCS) with a dynamer (Dy) prepared from Jeffamine and benzene-1,3,5-tricarbaldehyde. TP5 release from hydrogels was studied at 37 °C under in vitro conditions. The molar mass of CMCS, drug loading conditions and drug content were varied to elucidate their effects on hydrogel properties and drug release behaviors. Density functional theory was applied to theoretically confirm the chemical connections between TP5 or CMCS with Dy. All hydrogels exhibited interpenetrating porous architecture with average pore size from 59 to 83 μm, and pH-sensitive swelling up to 10,000% at pH 8. TP5 encapsulation affected the rheological properties of hydrogels as TP5 was partially attached to the network via imine bonding. Higher TP5 loading led to higher release rates. Faster release was observed at pH 5.5 than at pH 7.4 due to lower stability of imine bonds in acidic media. Fitting of release data using Higuchi model showed that initial TP5 release was essentially diffusion controlled. All these findings proved that the dynamic hydrogels are promising carriers for controlled delivery of hydrophilic drugs, and shed new light on the design of drug release systems by both physical mixing and reversible covalent bonding.

Overcoming the protein corona in chitosan-based nanoparticles

Numerous properties of chitosan have led to its extensive use in the formulation of nanomaterials for drug delivery. However, the cationic surface of chitosan-based nanoparticles adsorbs proteins upon exposure to biological fluids, forming a phenomenon known as 'protein corona'. This causes several effects such as decreased bioavailability and limited in vivo clinical applications of chitosan nanoparticles. Understanding and overcoming the effects of protein adsorption on chitosan nanoparticles is key for drug delivery purposes. This review focuses on the strategies implemented to increase the stability of chitosan nanoparticles in the systemic circulation by averting the formation of protein corona and the limitations of PEGylation.

Synthesis and characterization of hydrogels based on carboxymethyl chitosan and poly(vinylpyrrolidone) blends prepared by electron beam irradiation having anticancer efficacy, and applications as drug carrier for controlled release of drug

Herein, carboxymethyl chitosan and poly(vinylpyrrolidone) based hydrogels were synthesized by electron beam irradiation with dose variations (15 kGy, 30 kGy, and 45 kGy) for drug delivery applications. Irradiation crosslinked hydrogels were characterized for swellings in different medias, chemical, thermal, cell cytotoxicity, and drug release aspects. Swelling analysis was evaluated in distilled water, buffer, and saline solutions. Fourier transform infrared analysis revealed the establishment of physical interactions and confirmed the presence of functional groups present in the drug carriers. Scanning electron microscopy depicted the porous structure, which is responsible for swelling, drug loading, and release. Cell cytotoxicity assays indicated good cell viability on RAW 264.7 cells and anticancer activity on cancerous AGS cell lines. Cumulative drug release (%) of kanamycin in PBS at pH 7.4 was more than 90 % at 168 h. These drug carriers show promise to be developed as a sustained drug delivery system.

Recent Development of Alginate-Based Materials and Their Versatile Functions in Biomedicine, Flexible Electronics, and Environmental Uses

Alginate is a natural polysaccharide that is easily chemically modified or compounded with other components for various types of functionalities. The alginate derivatives are appealing not only because they are biocompatible so that they can be used in biomedicine or tissue engineering but also because of the prospering bioelectronics that require various biomaterials to interface between human tissues and electronics or to serve as electronic components themselves. The study of alginate-based materials, especially hydrogels, have repeatedly found new frontiers over recent years. In this Review, we document the basic properties of alginate, their chemical modification strategies, and the recent development of alginate-based functional composite materials. The newly thrived functions such as ionically conductive hydrogel or 3D or 4D cell culturing matrix are emphasized among other appealing potential applications. We expect that the documentation of relevant information will stimulate scientific efforts to further develop biocompatible electronics or smart materials and to help the research domain better address the medicine, energy, and environmental challenges faced by human societies.

The immunostimulatory effects of hydroxypropyltrimethyl ammonium chloride chitosan-carboxymethyl chitosan nanoparticles

In this study, we generated chitosan nanoparticles by exploiting the electrostatic interactions between positively charged hydroxypropyltrimethyl ammonium chloride chitosan (HACC) and negatively charged carboxymethyl chitosan (CMC), and examined the effects of altering the molecular weight and carboxymethyl substitution sites of the chitosan molecules. Particle size, potential, and encapsulation efficiency of the various chitosan nanoparticles were examined; the particle size range was 162.40-332.80 nm, the charge range was 19.50-40.60 mV, and the encapsulation efficiency range was 48.4-70.7%. We then examined the immunostimulatory effects of the nanoparticle variants on dendritic cells (DCs); we found that the site of carboxymethyl substitution significantly affected the immunostimulatory effects of the nanoparticles. Two nanoparticle types, 200 kDa N,O-carboxymethyl chitosan-HACC (NO-CMC-HACC) and N-carboxymethyl chitosan-HACC (N-CMC-HACC), greatly promoted the expression of interleukin-6, tumor necrosis factor, and interleukin-1β in DCs. Moreover, NO-CMC-HACC nanoparticles caused an increase in major histocompatibility complex-II (MHC-II), CD11c, CD80, and CD86 secretion in DCs, indicating that these nanoparticles promoted antigen presentation. We then examined chitosan nanoparticle uptake by DCs using laser confocal microscopy; we found that the NO-CMC-HACC nanoparticles were more readily absorbed by DCs compared to the N-CMC-HACC nanoparticles. Therefore, we concluded that 200 kDa NO-CMC-HACC nanoparticles exhibited strong potential as immunological adjuvants.

pH-Sensitive Alginate/Carboxymethyl Chitosan/Aminated Chitosan Microcapsules for Efficient Encapsulation and Delivery of Diclofenac Sodium

To develop an effective pH-sensitive drug carrier, alginate (Alg), carboxymethyl chitosan (CMCs), and aminated chitosan (AmCs) derivatives were employed in this study. A simple ionic gelation technique was employed to formulate Alg-CMCs@AmCs dual polyelectrolyte complexes (PECs) microcapsules as a pH-sensitive carrier for efficient encapsulation and release of diclofenac sodium (DS) drug. The developed microcapsules were characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analyzer (TGA), and scanning electron microscope (SEM). The results clarified that formation of dual PECs significantly protected Alg microcapsules from rapid disintegration at colon conditions (pH 7.4), and greatly reduced their porosity. In addition, the dual PECs microcapsules can effectively encapsulate 95.4% of DS-drug compared to 86.3 and 68.6% for Alg and Alg-CMCs microcapsules, respectively. Higher DS-release values were achieved in simulated colonic fluid [SCF; pH 7.4] compared to those obtained in simulated gastric fluid [SGF; pH 1.2]. Moreover, the drug burst release was prevented and a sustained DS-release was achieved as the AmCs concentration increased. The results confirmed also that the developed microcapsules were biodegradable in the presence of the lysozyme enzyme. These findings emphasize that the formulated pH-sensitive microcapsules could be applied for the delivery of diclofenac sodium.

Recent progress in preparation and applications of chitosan/calcium phosphate composite materials

Studying the development of unique materials from sustainable and renewable resources has gained increasing concern due to the depletion of fossil resources. Chitosan and its derivatives have been considered as versatile candidates for preparing attractive materials. The fabrication of chitosan/calcium phosphate composite compounds has received much attention for the development of numerous promising products in different fields. In this short review, recent preparation strategies for chitosan/calcium phosphate composites such as freeze casting, vacuum-assisted filtration, and biomimetic mineralization were discussed. The review presented their advances for diverse applications such as bone tissue engineering implants, drug delivery, wound healing, dental caries, as well adsorption of organic and heavy metals from polluted water. The challenges and future perspectives for the application of chitosan/calcium phosphate materials in biomedical and environmental applications were also involved in this review article.