Enzymatically crosslinked collagen-mimetic dendrimers that promote integrin-targeted cell adhesion

Collagen and derivatives-based materials as substrates for the establishment of glioblastoma organoids

Glioblastoma (GBM) is a common primary brain malignancy known for its ability to invade the brain, resistance to chemotherapy and radiotherapy, tendency to recur frequently, and unfavorable prognosis. Attempts have been undertaken to create 2D and 3D models, such as glioblastoma organoids (GBOs), to recapitulate the glioma microenvironment, explore tumor biology, and develop efficient therapies. However, these models have limitations and are unable to fully recapitulate the complex networks formed by the glioma microenvironment that promote tumor cell growth, invasion, treatment resistance, and immune escape. Therefore, it is necessary to develop advanced experimental models that could better simulate clinical physiology. Here, we review recent advances in natural biomaterials (mainly focus on collagen and its derivatives)-based GBO models, as in vitro experimental platforms to simulate GBM tumor biology and response to tested drugs. Special attention will be given to 3D models that use collagen, gelatin, further modified derivatives, and composite biomaterials (e.g., with other natural or synthetic polymers) as substrates. Application of these collagen/derivatives-constructed GBOs incorporate the physical as well as chemical characteristics of the GBM microenvironment. A perspective on future research is given in terms of current issues. Generally, natural materials based on collagen/derivatives (monomers or composites) are expected to enrich the toolbox of GBO modeling substrates and potentially help to overcome the limitations of existing models.

Development of Self-Assembled Biomimetic Nanoscale Collagen-like Peptide-Based Scaffolds for Tissue Engineering: An In Silico and Laboratory Study

Development of biocomposite scaffolds has gained tremendous attention due to their potential for tissue regeneration. However, most scaffolds often contain animal-derived collagen that may elicit an immunological response, necessitating the development of new biomaterials. Herein, we developed a new collagen-like peptide,(Pro-Ala-His)10 (PAH)10, and explored its ability to be utilized as a functional biomaterial by incorporating it with a newly synthesized peptide-based self-assembled gel. The gel was prepared by conjugating a pectin derivative, galataric acid, with a pro-angiogenic peptide (LHYQDLLQLQY) and further functionalized with a cortistatin-derived peptide, (Phe-Trp-Lys-Thr)4 (FWKT)4, and the bio-ionic liquid choline acetate. The self-assembly of (PAH)10 and its interactions with the galactarate-peptide conjugates were examined using replica exchange molecular dynamics (REMD) simulations. Results revealed the formation of a multi-layered scaffold, with enhanced stability at higher temperatures. We then synthesized the scaffold and examined its physicochemical properties and its ability to integrate with aortic smooth muscle cells. The scaffold was further utilized as a bioink for bioprinting to form three-dimensional cell-scaffold matrices. Furthermore, the formation of actin filaments and elongated cell morphology was observed. These results indicate that the (PAH)10 hybrid scaffold provides a suitable environment for cell adhesion, proliferation and growth, making it a potentially valuable biomaterial for tissue engineering.

Recent Advances in Biodegradable and Biocompatible Synthetic Polymers Used in Skin Wound Healing

The treatment of skin wounds caused by trauma and pathophysiological disorders has been a growing healthcare challenge, posing a great economic burden worldwide. The use of appropriate wound dressings can help to facilitate the repair and healing rate of defective skin. Natural polymer biomaterials such as collagen and hyaluronic acid with excellent biocompatibility have been shown to promote wound healing and the restoration of skin. However, the low mechanical properties and fast degradation rate have limited their applications. Skin wound dressings based on biodegradable and biocompatible synthetic polymers can not only overcome the shortcomings of natural polymer biomaterials but also possess favorable properties for applications in the treatment of skin wounds. Herein, we listed several biodegradable and biocompatible synthetic polymers used as wound dressing materials, such as PVA, PCL, PLA, PLGA, PU, and PEO/PEG, focusing on their composition, fabrication techniques, and functions promoting wound healing. Additionally, the future development prospects of synthetic biodegradable polymer-based wound dressings are put forward. Our review aims to provide new insights for the further development of wound dressings using synthetic biodegradable polymers.

Targeted nanomedicine: Lessons learned and future directions

Designing a therapeutic modality that will reach a certain organ, tissue, or cell type is crucial for both the therapeutic efficiency and to limit off-target adverse effects. Nanoparticles carrying various drugs, such as nucleic acids, small molecules and proteins, are promoting modalities to this end. Beyond the need to identify a target for a specific indication, an adequate design has to address the multiple biological barriers, such as systemic barriers, dilution and unspecific distribution, tissue penetration and intracellular trafficking. The field of targeted delivery has developed rapidly in recent years, with tremendous progress made in understating the biological barriers, and new technologies to functionalize nanoparticles with targeting moieties for an accurate, specific and highly selective delivery. Implementing new approaches like multi-functionalized nanocarriers and machine learning models will advance the field for designing safe, cell -specific nanoparticle delivery systems. Here, we will critically review the current progress in the field and suggest novel strategies to improve cell specific delivery of therapeutic payloads.

Dendritic Polymers in Tissue Engineering: Contributions of PAMAM, PPI PEG and PEI to Injury Restoration and Bioactive Scaffold Evolution

The capability of radially polymerized bio-dendrimers and hyperbranched polymers for medical applications is well established. Perhaps the most important implementations are those that involve interactions with the regenerative mechanisms of cells. In general, they are non-toxic or exhibit very low toxicity. Thus, they allow unhindered and, in many cases, faster cell proliferation, a property that renders them ideal materials for tissue engineering scaffolds. Their resemblance to proteins permits the synthesis of derivatives that mimic collagen and elastin or are capable of biomimetic hydroxy apatite production. Due to their distinctive architecture (core, internal branches, terminal groups), dendritic polymers may play many roles. The internal cavities may host cell differentiation genes and antimicrobial protection drugs. Suitable terminal groups may modify the surface chemistry of cells and modulate the external membrane charge promoting cell adhesion and tissue assembly. They may also induce polymer cross-linking for healing implementation in the eyes, skin, and internal organ wounds. The review highlights all the different categories of hard and soft tissues that may be remediated with their contribution. The reader will also be exposed to the incorporation of methods for establishment of biomaterials, functionalization strategies, and the synthetic paths for organizing assemblies from biocompatible building blocks and natural metabolites.

Biomaterial functionalization with triple-helical peptides for tissue engineering

In the growing field of tissue engineering, providing cells in biomaterials with the adequate biological cues represents an increasingly important challenge. Yet, biomaterials with excellent mechanical properties often are often biologically inert to many cell types. To address this issue, researchers resort to functionalization, i.e. the surface modification of a biomaterial with active molecules or substances. Functionalization notably aims to replicate the native cellular microenvironment provided by the extracellular matrix, and in particular by collagen, its major component. As our understanding of biological processes regulating cell behaviour increases, functionalization with biomolecules binding cell surface receptors constitutes a promising strategy. Amongst these, triple-helical peptides (THPs) that reproduce the architectural and biological properties of collagen are especially attractive. Indeed, THPs containing binding sites from the native collagen sequence have successfully been used to guide cell response by establishing cell-biomaterial interactions. Notably, the GFOGER motif recognising the collagen-binding integrins is extensively employed as a cell adhesive peptide. In biomaterials, THPs efficiently improved cell adhesion, differentiation and function on biomaterials designed for tissue repair (especially for bone, cartilage, tendon and heart), vascular graft fabrication, wound dressing, drug delivery or immunomodulation. This review describes the key characteristics of THPs, their effect on cells when combined to biomaterials and their strong potential as biomimetic tools for regenerative medicine. STATEMENT OF SIGNIFICANCE: This review article describes how triple-helical peptides constitute efficient tools to improve cell-biomaterial interactions in tissue engineering. Triple helical peptides are bioactive molecules that mimic the architectural and biological properties of collagen. They have been successfully used to specifically recognize cell-surface receptors and provide cells seeded on biomaterials with controlled biological cues. Functionalization with triple-helical peptides has enabled researchers to improve cell function for regenerative medicine applications, such as tissue repair. However, despite encouraging results, this approach remains limited and under-exploited, and most functionalization strategies reported in the literature rely on biomolecules that are unable to address collagen-binding receptors. This review will assist researchers in selecting the correct tools to functionalize biomaterials in efforts to guide cellular response.

A pH-responsiveness injectable hyaluronic acid hydrogel towards regulation of inflammation and remodeling of extracellular matrix for diabetic wound

Diabetes is a universal disease in the world. A critical mediator of proper wound healing is the production, assembly, and remodeling of the ECM by fibroblasts, but in the wound...

Poly(amino ester)-Based Polymers for Gene and Drug Delivery Systems and Further Application toward Cell Culture System

Various synthetic polymers based on poly(amino ester) (PAE) are suggested as candidates for gene and drug delivery owing to their pH-responsiveness, which contributes to efficient delivery performance. PAE-based pH-responsive polymers are more biodegradable and hydrophilic than other types of pH-responsive polymers. The functionality of PAE-based polymers can be reinforced by using different chemical modifications to improve the efficiency of gene and drug delivery. Additionally, PAE-based polymers are used in many ways in the biomedical field, such as in transdermal delivery and stem cell culture systems. Here, the recent novel PAE-based polymers designed for gene and drug delivery systems along with their further applications toward adult stem cell culture systems are reviewed. The synthetic tactics are contemplated and pros and cons of each type of polymer are analyzed, and detailed examples of the different types are analyzed.

Application of Dendrimers for Treating Parasitic Diseases

Despite advances in medical knowledge, parasitic diseases remain a significant global health burden and their pharmacological treatment is often hampered by drug toxicity. Therefore, drug delivery systems may provide useful advantages when used in combination with conventional therapeutic compounds. Dendrimers are three-dimensional polymeric structures, characterized by a central core, branches and terminal functional groups. These nanostructures are known for their defined structure, great water solubility, biocompatibility and high encapsulation ability against a wide range of molecules. Furthermore, the high ratio between terminal groups and molecular volume render them a hopeful vector for drug delivery. These nanostructures offer several advantages compared to conventional drugs for the treatment of parasitic infection. Dendrimers deliver drugs to target sites with reduced dosage, solving side effects that occur with accepted marketed drugs. In recent years, extensive progress has been made towards the use of dendrimers for therapeutic, prophylactic and diagnostic purposes for the management of parasitic infections. The present review highlights the potential of several dendrimers in the management of parasitic diseases.

Oxytetracycline versus Doxycycline Collagen Sponges Designed as Potential Carrier Supports in Biomedical Applications

Many research studies are directed toward developing safe and efficient collagen-based biomaterials as carriers for drug delivery systems. This article presents a comparative study of the properties of new collagen sponges prepared and characterized by different methods intended for biomedical applications. The structural integrity is one of the main properties for a biomaterial in order for it to be easily removed from the treated area. Thus, the effect of combining a natural polymer such as collagen with an antimicrobial drug such as oxytetracycline or doxycycline and glutaraldehyde as the chemical cross-linking agent influences the cross-linking degree of the material, which is in direct relation to its resistance to collagenase digestion, the drug kinetic release profile, and in vitro biocompatibility. The enzymatic degradation results identified oxytetracycline as the best inhibitor of collagenase when the collagen sponge was cross-linked with 0.5% glutaraldehyde. The drug release kinetics revealed an extended release of the antibiotic for oxytetracycline-loaded collagen sponges compared with doxycycline-loaded collagen sponges. Considering the behavior of differently prepared sponges, the collagen sponge with oxytetracycline and 0.5% glutaraldehyde could represent a viable polymeric support for the prevention/treatment of infections at the application site, favoring tissue regeneration.

Biopolymers: Applications in wound healing and skin tissue engineering

Wound is a growing healthcare challenge affecting several million worldwide. Lifestyle disorders such as diabetes increases the risk of wound complications. Effective management of wound is often difficult due to the complexity in the healing process. Addition to the conventional wound care practices, the bioactive polymers are gaining increased importance in wound care. Biopolymers are naturally occurring biomolecules synthesized by microbes, plants and animals with highest degree of biocompatibility. The bioactive properties such as antimicrobial, immune-modulatory, cell proliferative and angiogenic of the polymers create a microenvironment favorable for the healing process. The versatile properties of the biopolymers such as cellulose, alginate, hyaluronic acid, collagen, chitosan etc have been exploited in the current wound care market. With the technological advances in material science, regenerative medicine, nanotechnology, and bioengineering; the functional and structural characteristics of biopolymers can be improved to suit the current wound care demands such as tissue repair, restoration of lost tissue integrity and scarless healing. In this review we highlight on the sources, mechanism of action and bioengineering approaches adapted for commercial exploitation.

Controlled release of BMP-2 from a collagen-mimetic peptide-modified silk fibroin–nanohydroxyapatite scaffold for bone regeneration

Controlled release of BMP-2 from a collagen-mimetic peptide-modified scaffold for bone regeneration.

Decreased Mechanical Strength and Collagen Content in SPARC-Null Periodontal Ligament Is Reversed by Inhibition of Transglutaminase Activity

The periodontal ligament (PDL) is a critical tissue that provides a physical link between the mineralized outer layer of the tooth and the alveolar bone. The PDL is composed primarily of nonmineralized fibrillar collagens. Expression of secreted protein acidic and rich in cysteine (SPARC/osteonectin), a collagen-binding matricellular protein, has been shown to be essential for collagen homeostasis in PDL. In the absence of SPARC, PDL collagen fibers are smaller and less dense than fibers that constitute WT PDL. The aim of this study was to identify cellular mechanisms by which SPARC affected collagen fiber assembly and morphology in PDL. Cross-linking of fibrillar collagens is one parameter that is known to affect insoluble collagen incorporation and fiber morphology. Herein, the reduction in collagen fiber size and quantity in the absence of SPARC expression was shown to result in a PDL with reduced molar extraction force in comparison to that of WT mice (C57Bl/6J). Furthermore, an increase in transglutaminase activity was found in SPARC-null PDL by biochemical analyses that was supported by immunohistochemical results. Specifically, collagen I was identified as a substrate for transglutaminase in PDL and transglutaminase activity on collagen I was found to be greater in SPARC-null tissues in comparison to WT. Strikingly, inhibition of transglutaminase activity in SPARC-null PDL resulted in increases in both collagen fiber thickness and in collagen content, whereas transglutaminase inhibitors injected into WT mice resulted in increases in collagen fiber thickness only. Furthermore, PDL treated with transglutaminase inhibitors exhibited increases in molar extraction force in WT and in SPARC-null mice. Thus, SPARC is proposed to act as a critical regulator of transglutaminase activity on collagen I with implications for mechanical strength of tissues.

Review collagen-based biomaterials for wound healing

With its wide distribution in soft and hard connective tissues, collagen is the most abundant of animal proteins. In vitro, natural collagen can be formed into highly organized, three-dimensional scaffolds that are intrinsically biocompatible, biodegradable, nontoxic upon exogenous application, and endowed with high tensile strength. These attributes make collagen the material of choice for wound healing and tissue engineering applications. In this article, we review the structure and molecular interactions of collagen in vivo; the recent use of natural collagen in sponges, injectables, films and membranes, dressings, and skin grafts; and the on-going development of synthetic collagen mimetic peptides as pylons to anchor cytoactive agents in wound beds.

Design of embedded-hybrid antimicrobial peptides with enhanced cell selectivity and anti-biofilm activity

Antimicrobial peptides have attracted considerable attention because of their broad-spectrum antimicrobial activity and their low prognostic to induce antibiotic resistance which is the most common source of failure in bacterial infection treatment along with biofilms. The method to design hybrid peptide integrating different functional domains of peptides has many advantages. In this study, we designed an embedded-hybrid peptide R-FV-I16 by replacing a functional defective sequence RR7 with the anti-biofilm sequence FV7 embedded in the middle position of peptide RI16. The results demonstrated that the synthetic hybrid the peptide R-FV-I16 had potent antimicrobial activity over a wide range of Gram-negative and Gram-positive bacteria, as well as anti-biofilm activity. More importantly, R-FV-I16 showed lower hemolytic activity and cytotoxicity. Fluorescent assays demonstrated that R-FV-I16 depolarized the outer and the inner bacterial membranes, while scanning electron microscopy and transmission electron microscopy further indicated that this peptide killed bacterial cells by disrupting the cell membrane, thereby damaging membrane integrity. Results from SEM also provided evidence that R-FV-I16 inherited anti-biofilm activity from the functional peptide sequence FV7. Embedded-hybrid peptides could provide a new pattern for combining different functional domains and showing an effective avenue to screen for novel antimicrobial agents.

Angiogenic responses are enhanced in mechanically and microscopically characterized, microbial transglutaminase crosslinked collagen matrices with increased stiffness

During angiogenesis, endothelial cells (ECs) use both soluble and insoluble cues to expand the existing vascular network to meet the changing trophic needs of the tissue. Fundamental to this expansion are physical interactions between ECs and extracellular matrix (ECM) that influence sprout migration, lumen formation and stabilization. These physical interactions suggest that ECM mechanical properties may influence sprouting ECs and, therefore, angiogenic responses. In a three-dimensional angiogenic model in which a monolayer of ECs is induced to invade an underlying collagen matrix, angiogenic responses were measured as a function of collagen matrix stiffness by inducing collagen crosslinking with microbial transglutaminase (mTG). By biaxial mechanical testing, stiffer collagen matrices were measured with both mTG treatment and incubation time. Using two-photon excited fluorescence (TPF) and second harmonic generation (SHG), it was shown that collagen TPF intensity increased with mTG treatment, and the TPF/SHG ratio correlated with biaxially tested mechanical stiffness. SHG and OCM were further used to show that other ECM physical properties such as porosity and pore size did not change with mTG treatment, thus verifying that matrix stiffness was tuned independently of matrix density. The results showed that stiffer matrices promote more angiogenic sprouts that invade deeper. No differences in lumen size were observed between control and mTG stiffened matrices, but greater remodeling was revealed in stiffer gels using SHG and OCM. The results of this study show that angiogenic responses are influenced by stiffness and suggest that ECM properties may be useful in regenerative medicine applications to engineer angiogenesis.

Nitric oxide-releasing dendrimers as antibacterial agents

The antibacterial activity of a series of nitric oxide (NO)-releasing poly(propylene imine) (PPI) dendrimers was evaluated against both Gram-positive and Gram-negative pathogenic bacteria, including methicillin-resistant Staphylococcus aureus . A direct comparison of the bactericidal efficacy between NO-releasing and control PPI dendrimers (i.e., non-NO-releasing) revealed both enhanced biocidal action of NO-releasing dendrimers and reduced toxicity against mammalian fibroblast cells. Antibacterial activity for the NO donor-functionalized PPI dendrimers was shown to be a function of both dendrimer size (molecular weight) and exterior functionality. In addition to minimal toxicity against fibroblasts, NO-releasing PPI dendrimers modified with styrene oxide exhibited the greatest biocidal activity (≥99.999% killing) against all bacterial strains tested. The N-diazeniumdiolate NO donor-functionalized PPI dendrimers presented in this study hold promise as effective NO-based therapeutics for combating bacterial infections.

Cellular functions of tissue transglutaminase

Transglutaminase 2 (TG2 or tissue transglutaminase) is a highly complex multifunctional protein that acts as transglutaminase, GTPase/ATPase, protein disulfide isomerase, and protein kinase. Moreover, TG2 has many well-documented nonenzymatic functions that are based on its noncovalent interactions with multiple cellular proteins. A vast array of biochemical activities of TG2 accounts for its involvement in a variety of cellular processes, including adhesion, migration, growth, survival, apoptosis, differentiation, and extracellular matrix organization. In turn, the impact of TG2 on these processes implicates this protein in various physiological responses and pathological states, contributing to wound healing, inflammation, autoimmunity, neurodegeneration, vascular remodeling, tumor growth and metastasis, and tissue fibrosis. TG2 is ubiquitously expressed and is particularly abundant in endothelial cells, fibroblasts, osteoblasts, monocytes/macrophages, and smooth muscle cells. The protein is localized in multiple cellular compartments, including the nucleus, cytosol, mitochondria, endolysosomes, plasma membrane, and cell surface and extracellular matrix, where Ca(2+), nucleotides, nitric oxide, reactive oxygen species, membrane lipids, and distinct protein-protein interactions in the local microenvironment jointly regulate its activities. In this review, we discuss the complex biochemical activities and molecular interactions of TG2 in the context of diverse subcellular compartments and evaluate its wide ranging and cell type-specific biological functions and their regulation.

Self-assembly of collagen-mimetic peptide amphiphiles into biofunctional nanofiber

Molecular assembly of protein and peptide is highly specific and frequently occurs in biological systems. Collagen, which is the most abundant component in extracellular matrix, can assemble into fiber and play an essential role in cell adhesion and growth. Since native collagen is difficult to modify and can engender pathogenic and immunological side effects, its application on tissue regeneration is limited. The preparation of collagen-mimetic materials, hence, is gaining interest in the field of tissue regeneration. Collagen peptides have been synthesized to mimic some properties of collagen, such as its triple helix. However, few studies have been done to prepare artificial collagen fiber to mimic its high-level structure and biofunctions. In this work, a novel collagen-mimetic peptide amphiphile (CPA) was prepared by conjugating a single hydrophobic tail with a collagen-mimetic peptide, supplemented with bioactive glycine-phenylalanine-hydroxyproline-glycine-glutamate-arginine (GFOGER). The physical studies indicated that the CPA had a collagen-mimetic triple-helical conformation and was able to self-assemble into nanofiber. In addition, the CPA conjugated with the integrin-specific GFOGER sequence was shown to promote collagen-mimetic cell adhesion and development. The self-assembled peptide nanofiber was shown to have the ability to structurally and biologically mimic native collagen fiber. We anticipate that this artificial collagen fiber holds great potential as collagen-mimetic materials for tissue regeneration applications.

Collagen Mimetic Peptides: Progress Towards Functional Applications

Traditionally, collagen mimetic peptides (CMPs) have been used for elucidating the structure of the collagen triple helix and the factors responsible for its stabilization. The wealth of fundamental knowledge on collagen structure and cell-extracellular matrix (ECM) interactions accumulated over the past decades has led to a recent burst of research exploring the potential of CMPs to recreate the higher order assembly and biological function of natural collagens for biomedical applications. Although a large portion of such research is still at an early stage, the collagen triple helix has become a promising structural motif for engineering self-assembled, hierarchical constructs similar to natural tissue scaffolds which are expected to exhibit unique or enhanced biological activities. This paper reviews recent progress in the field of collagen mimetic peptides that bears both direct and indirect implications to engineering collagen-like materials for potential biomedical use. Various CMPs and collagen-like proteins that mimic either structural or functional characteristics of natural collagens are discussed with particular emphasis on providing helpful information to bioengineers and biomaterials scientists interested in collagen engineering.

Integrin-mediated adhesion and proliferation of human MSCs elicited by a hydroxyproline-lacking, collagen-like peptide

In this study, we evaluated the competence of a rationally designed collagen-like peptide (CLP-Cys) sequence - containing the minimal essential Glycine-Glutamic acid-Arginine (GER) triplet but lacking the hydroxyproline residue - for supporting human mesenchymal stem cell (hMSC) adhesion, spreading and proliferation. Cellular responses to the CLP-Cys sequence were analyzed by conjugating the peptide to two different substrates - a hard, planar glass surface and a soft hyaluronic acid (HA) particle-based hydrogel. Integrin-mediated cell spreading and adhesion were observed for hMSCs cultivated on the CLP-Cys functionalized surfaces, whereas on control surfaces lacking the peptide motif, cells either did not adhere or maintained a round morphology. On the glass surface, CLP-Cys-mediated spreading led to the formation of extended and well developed stress fibers composed of F-actin bundles and focal adhesion complexes while on the soft gel surface, less cytoskeletal reorganization organization was observed. The hMSCs proliferated significantly on the surfaces presenting CLP-Cys, compared to the control surfaces lacking CLP-Cys. Competitive binding assay employing soluble CLP-Cys revealed a dose-dependent inhibition of hMSC adhesion to the CLP-Cys-presenting surfaces. Blocking the α(2)β(1) receptor on hMSC also resulted in a reduction of cell adhesion on both types of CLP-Cys surfaces, confirming the affinity of CLP-Cys to α(2)β(1) receptors. These results established the competence of the hydroxyproline-free CLP-Cys for eliciting integrin-mediated cellular responses including adhesion, spreading and proliferation. Thus, CLP-Cys-modified HA hydrogels are attractive candidates as bioactive scaffolds for tissue engineering applications.

Biomimetic hydrogels for chondrogenic differentiation of human mesenchymal stem cells to neocartilage

In this study, a collagen mimetic peptide (CMP) containing a GFOGER sequence flanked by GPO repeat units (sequence: (GPO)(4)GFOGER(GPO)(4)GCG, CMP) was synthesized and chemically incorporated into a poly(ethylene glycol) (PEG) hydrogel through Michael addition chemistry. The PEG/collagen mimetic peptide hybrid hydrogel was used as a scaffold for encapsulation, proliferation and differentiation of human mesenchymal stem cells (hMSCs) into neocartilage/chondrocytes. Biophysical studies indicated that this peptide adopts stable triple helical conformation under simulated physiological conditions. Tetra hydroxyl PEG was functionalized to generate an acrylate group and reacted with the peptide, and hydrogels were formed in situ with the addition of cells and tetra sulfhydryl PEG via Michael addition. The effect of CMP on proliferation and chondrogenesis of hMSCs was investigated. The results demonstrated that PEG-CMP hydrogels provided a natural environment, which promoted chondrogenesis of hMSCs and enhanced secretion of cartilage specific ECM as compared to PEG hydrogels without the peptide. This was attributed to enhanced cell/matrix interactions via integrin beta1/GFOGER interactions. Further, chondrogenesis was found to be affected by matrix elasticity. Soft matrix induced a greater degree of chondrogenic differentiation; however, stiff matrix had an opposite effect, inhibiting chondrogenic differentiation probably due to limited mass transport. This soft PEG/CMP hydrogel shows promise as a biomimetic scaffold that provides a desirable environment for the chondrogenic differentiation of hMSCs and is useful for the repair of cartilage defects.

Amine functionalization of collagen matrices with multifunctional polyethylene glycol systems

A method to functionalize collagen-based biomaterials with free amine groups was established in an attempt to improve their potential for tethering of bioactive molecules. Collagen sponges were incorporated with amine-terminated multifunctional polyethylene glycol (PEG) derivatives after N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide and N-hydroxysuccinimide (EDC/NHS) cross-linking. The extent of the incorporation of different amounts and different numbers of active moieties of amine-terminated PEG systems into the collagen scaffolds was evaluated using ninhydrin assay, Fourier transform infrared spectrophotometry (FTIR), collagenase degradation assay, denaturation temperature measurements, and in vitro cell studies. A 3% 8-arm amine-terminated PEG was found to be the minimum required effective concentration to functionalize EDC/NHS stabilized collagen scaffolds. EDC/NHS stabilized scaffolds treated with 3% 8-arm amine-terminated PEG exhibited significantly improved denaturation temperature and resistance to collagenase degradation over non-cross-linked scaffolds (p < 0.002). Biological evaluation using 3T3 cells demonstrated that the produced scaffolds facilitated maintenance of the cells' morphology, metabolic activity, and ability to proliferate in vitro. Overall, our results indicate that amine-terminated PEG systems can be used as means to enhance the functionality of collagenous structures.

Higher order structure of short collagen model peptides attached to dendrimers and linear polymers

Collagen, which is used as a biomaterial, is the most abundant protein in mammals. We have previously reported that a dendrimer modified with collagen model peptides, (Gly-Pro-Pro)(5), formed a collagen-like triple-helical structure, showing thermal reversibility. In this study, various collagen-mimic dendrimers of different generations and at different binding ratios were synthesized, to investigate the relationship between the peptide clustering effect and the higher order structure formation. The formation of the higher order structure was influenced by the binding ratios of the peptide to the dendrimer, but was not influenced by the dendrimer generation. A spacer, placed between the dendrimer terminal group and the peptide, negatively contributed to the formation of the higher order structure. The collagen model peptides were also attached to poly(allylamine) (PAA) and poly-L-lysine (poly(Lys)) to compare them with the collagen-mimic dendrimers. The PAA-based collagen-mimic compound, bearing more collagen model peptides than the dendrimer, exhibited a thermally stable higher order structure. In contrast, this was not observed for the collagen-mimic polymers based on poly(Lys). Therefore, dendrimers and vinyl polymers act as a scaffold for collagen model peptides and subsequently induce higher order structures.

An in situ and in vitro investigation for the transglutaminase potential in tissue engineering

Transglutaminases (TGases) constitute a family of enzymes that stabilize protein assemblies by gamma-glutamyl-epsilon-lysine crosslinks. The role of tissue transglutaminase (TGase 2) in several pathophysiologies, wound healing applications, biomaterials functionalization, and drug delivery systems provides grounds for its use in tissue engineering. Herein, we initially studied the endogenous TGase activity and expression under normal (skin, duodenum, colon, and small bowel) and pathophysiological (keloid scar) conditions on cadaveric human tissues. Successful inhibition was achieved using low concentrations of BOC-DON-QIV-OMe (0.1 mM and 1 mM for normal skin and keloid scar, respectively), iodoacetamide (0.1 mM and 1 mM for normal skin and keloid scar, respectively), and cystamine dihydrochloride (1 mM and 10 mM for normal skin and keloid scar, respectively), whilst di-BOC-cystamine was found ineffective even at 100 mM concentration. Secondly, the addition of exogenous guinea pig liver transglutaminase (gpTGase) onto the inhibited tissues and collagen scaffolds was studied, and results presented advocate its use as potential tissue adhesive and drug delivery tool. However, the investigation of its crosslinking extent using second harmonic generation microscopy and differentially scanning calorimetry revealed rather poor stabilization function. Overall, our study indicates that TGase 2 has a role as a biological glue to consolidate various micro-structural components of tissues and biomaterials.

Synthesis and biological applications of collagen-model triple-helical peptides

Triple-helical peptides (THPs) have been utilized as collagen models since the 1960s. The original focus for THP-based research was to unravel the structural determinants of collagen. In the last two decades, virtually all aspects of collagen structural biochemistry have been explored with THP models. More specifically, secondary amino acid analogs have been incorporated into THPs to more fully understand the forces that stabilize triple-helical structure. Heterotrimeric THPs have been utilized to better appreciate the contributions of chain sequence diversity on collagen function. The role of collagen as a cell signaling protein has been dissected using THPs that represent ligands for specific receptors. The mechanisms of collagenolysis have been investigated using THP substrates and inhibitors. Finally, THPs have been developed for biomaterial applications. These aspects of THP-based research are overviewed herein.

Characterization of amine donor and acceptor sites for tissue type transglutaminase using a sequence from the C-terminus of human fibrillin-1 and the N-terminus of osteonectin

Transglutaminase (TGase)-modified proteins are commonly observed in a wide range of biological systems. Therefore, the identification of TGase substrates and respective consensus sites may contribute to a better understanding of the physiological role of TGase. In this study, we identified enzyme-specific properties of two peptide sequences, EDGFFKI, derived from human fibrillin-1, and the previously characterized APQQEA, derived from human osteonectin. EDGFFKI was identified in a previous publication as an amine donor substrate for tissue TGase; APQ(3)Q(4)EA is an amine acceptor for this enzyme. A widely-used lysine donor mimic, monodansylcadaverine (MDC), was used as a control. EDGFFKI crosslinked specifically only to Q(3) of the acceptor probe. The EDGFFKI sequence also showed enzyme specificity for tissue TGase while no reaction was observed with plasma TGase (Factor XIIIa), consistent with its natural occurrence in vivo. Using this substrate in biotinylated form we demonstrate its value as a tracer probe to detect endogenous TGase activity in human tissues as well as to target potential amine acceptor substrates via an enzyme-directed site-specific labeling. The results of this study show natively derived EDGFFKI and APQQEA are better and more specific indicators of endogenous tissue TGase activity as compared to a small molecule probe; this may be important in diagnostic applications. The specificity with which matrix sequences APQQEA and EDGFFKI interact with tissue TGase but not plasma TGase may also be crucial for understanding and controlling the function of these TGases in vivo and in tissue engineering.

A collagen-mimetic triple helical supramolecule that evokes integrin-dependent cell responses

Collagen is an abundantly distributed extracellular matrix protein in mammalian bodies that maintains structural integrity of the organs and tissues. Besides its function as a structural protein, collagen has various biological functions which regulate cell adhesion, migration and differentiation. In order to develop totally synthetic collagen-surrogates, we recently reported a basic concept for preparing collagen-like triple helical supramolecules based on the self-assembly of staggered trimeric peptides with self-complementary shapes. In this paper, we add one of the specific cellular functions of the native collagen to the collagen-mimetic supramolecule. We synthesized a self-assembling peptide unit containing the integrin-binding sequence Gly-Phe-Hyp-Gly-Glu-Arg. The supramolecule carrying the sequence exhibited significant binding activity to human dermal fibroblasts. The supramolecular structure was found to be essential for function in in vitro cell culture. Cell adhesion was shown to be comparable to that of native collagen, and was further demonstrated to be mediated solely by integrin alpha 2 beta 1. Well-grown focal contacts and stress fibers were observed in cells spread on the supramolecular collagen-mimetic. The results demonstrate the potential of peptide-based artificial collagen as a biomaterial for regulating specific cellular function and fate.

Comparative performance of electrospun collagen nanofibers cross-linked by means of different methods

Collagen, as the major structural protein of the extracellular matrix in animals, is a versatile biomaterial of great interest in various engineering applications. Electrospun nanofibers of collagen are regarded as very promising materials for tissue engineering applications because they can reproduce the morphology of the natural bone but have as a drawback a poor structural consistency in wet conditions. In this paper, a comparative study between the performance of different cross-linking methods such as a milder enzymatic treatment procedure using transglutaminase, the use of N-[3-(dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide, and genipin, and the use of a physical method based on exposure to ultraviolet light was carried out. The chemical and enzymatic treatments provided, in this order, excellent consistency, morphology, cross-linking degree, and osteoblast viability for the collagen nanofibers. Interestingly, the enzymatically cross-linked collagen mats, which are considered to be a more biological treatment, promoted adequate cell adhesion, making the biomaterial biocompatible and with an adequate degree of porosity for cell seeding and in-growth.

Transglutaminase 2 cross-linking of matrix proteins: biological significance and medical applications

This review summarises the functions of the enzyme tissue transglutaminase (TG2) in the extracellular matrix (ECM) both as a matrix stabiliser through its protein cross-linking activity and as an important cell adhesion protein involved in cell survival. The contribution of extracellular TG2 to the pathology of important diseases such as cancer and fibrosis are discussed with a view to the potential importance of TG2 as a therapeutic target. The medical applications of TG2 are further expanded by detailing the use of transglutaminase cross-linking in the development of novel biocompatible biomaterials for use in soft and hard tissue repair.