Polyester based nerve guidance conduit design

Development of a Tri-Layered Vascular Construct and In Vitro Evaluation of Endothelization

Advances in the development of vascular substitutes for small-sized arteries are ongoing because the present grafts do not entirely meet the requirements of native equivalents and are suboptimal in clinical performance. This study aims to develop a tri-layered vascular construct mimicking natural tissue using polyester blends and to investigate its endothelization through in vitro studies as a potential small-caliber vascular graft. The innermost layer is obtained by dip coating as a tubular porous film with a lumen diameter of 3 mm and a pore size of ≤8 µm. Circumferentially aligned electrospun fiber (diameter 100-800 nm) with a deviation angle of 15° are deposited over the porous film forming the intermediate layer. The random electrospun fibers (diameter 100-1100 nm) deviating at different angles are wrapped as the outermost layer. The mechanical properties of the tri-layered vascular construct are determined to be 44.80 ± 14.80 MPa for Young's modulus and 4.25 ± 0.75 MPa for ultimate tensile strength. MTS and cell behavior studies show that the isolated human umbilical cord vein endothelial cells proliferate and line the lumen of the vascular substitute. The vascular construct developed, with its biomimetic architecture, mechanical features, size, and endothelization, can be tested with in vivo studies.

Revealing an important role of piezoelectric polymers in nervous-tissue regeneration: A review

Nerve injuries pose a drastic threat to nerve mobility and sensitivity and lead to permanent dysfunction due to low regenerative capacity of mature neurons. The electrical stimuli that can be provided by electroactive materials are some of the most effective tools for the formation of soft tissues, including nerves. Electric output can provide a distinctly favorable bioelectrical microenvironment, which is especially relevant for the nervous system. Piezoelectric biomaterials have attracted attention in the field of neural tissue engineering owing to their biocompatibility and ability to generate piezoelectric surface charges. In this review, an outlook of the most recent achievements in the field of piezoelectric biomaterials is described with an emphasis on piezoelectric polymers for neural tissue engineering. First, general recommendations for the design of an optimal nerve scaffold are discussed. Then, specific mechanisms determining nerve regeneration via piezoelectric stimulation are considered. Activation of piezoelectric responses via natural body movements, ultrasound, and magnetic fillers is also examined. The use of magnetoelectric materials in combination with alternating magnetic fields is thought to be the most promising due to controllable reproducible cyclic deformations and deep tissue permeation by magnetic fields without tissue heating. In vitro and in vivo applications of nerve guidance scaffolds and conduits made of various piezopolymers are reviewed too. Finally, challenges and prospective research directions regarding piezoelectric biomaterials promoting nerve regeneration are discussed. Thus, the most relevant scientific findings and strategies in neural tissue engineering are described here, and this review may serve as a guideline both for researchers and clinicians.

Research advancements on nerve guide conduits for nerve injury repair

Peripheral nerve injury (PNI) is one of the most serious causes of disability and loss of work capacity of younger individuals. Although PNS has a certain degree of regeneration, there are still challenges like disordered growth, neuroma formation, and incomplete regeneration. Regarding the management of PNI, conventional methods such as surgery, pharmacotherapy, and rehabilitative therapy. Treatment strategies vary depending on the severity of the injury. While for the long nerve defect, autologous nerve grafting is commonly recognized as the preferred surgical approach. Nevertheless, due to lack of donor sources, neurological deficits and the low regeneration efficiency of grafted nerves, nerve guide conduits (NGCs) are recognized as a future promising technology in recent years. This review provides a comprehensive overview of current treatments for PNI, and discusses NGCs from different perspectives, such as material, design, fabrication process, and composite function.

The Porous Structure of Peripheral Nerve Guidance Conduits: Features, Fabrication, and Implications for Peripheral Nerve Regeneration

Porous structure is an important three-dimensional morphological feature of the peripheral nerve guidance conduit (NGC), which permits the infiltration of cells, nutrients, and molecular signals and the discharge of metabolic waste. Porous structures with precisely customized pore sizes, porosities, and connectivities are being used to construct fully permeable, semi-permeable, and asymmetric peripheral NGCs for the replacement of traditional nerve autografts in the treatment of long-segment peripheral nerve injury. In this review, the features of porous structures and the classification of NGCs based on these characteristics are discussed. Common methods for constructing 3D porous NGCs in current research are described, as well as the pore characteristics and the parameters used to tune the pores. The effects of the porous structure on the physical properties of NGCs, including biodegradation, mechanical performance, and permeability, were analyzed. Pore structure affects the biological behavior of Schwann cells, macrophages, fibroblasts, and vascular endothelial cells during peripheral nerve regeneration. The construction of ideal porous structures is a significant advancement in the regeneration of peripheral nerve tissue engineering materials. The purpose of this review is to generalize, summarize, and analyze methods for the preparation of porous NGCs and their biological functions in promoting peripheral nerve regeneration to guide the development of medical nerve repair materials.

Advances in Biomimetic Nerve Guidance Conduits for Peripheral Nerve Regeneration

Injuries to the peripheral nervous system are a common clinical issue, causing dysfunctions of the motor and sensory systems. Surgical interventions such as nerve autografting are necessary to repair damaged nerves. Even with autografting, i.e., the gold standard, malfunctioning and mismatches between the injured and donor nerves often lead to unwanted failure. Thus, there is an urgent need for a new intervention in clinical practice to achieve full functional recovery. Nerve guidance conduits (NGCs), providing physicochemical cues to guide neural regeneration, have great potential for the clinical regeneration of peripheral nerves. Typically, NGCs are tubular structures with various configurations to create a microenvironment that induces the oriented and accelerated growth of axons and promotes neuron cell migration and tissue maturation within the injured tissue. Once the native neural environment is better understood, ideal NGCs should maximally recapitulate those key physiological attributes for better neural regeneration. Indeed, NGC design has evolved from solely physical guidance to biochemical stimulation. NGC fabrication requires fundamental considerations of distinct nerve structures, the associated extracellular compositions (extracellular matrices, growth factors, and cytokines), cellular components, and advanced fabrication technologies that can mimic the structure and morphology of native extracellular matrices. Thus, this review mainly summarizes the recent advances in the state-of-the-art NGCs in terms of biomaterial innovations, structural design, and advanced fabrication technologies and provides an in-depth discussion of cellular responses (adhesion, spreading, and alignment) to such biomimetic cues for neural regeneration and repair.

Prospects of Using Chitosan-Based Biopolymers in the Treatment of Peripheral Nerve Injuries

Peripheral nerve injuries are common neurological disorders, and the available treatment options, such as conservative management and surgical repair, often yield limited results. However, there is growing interest in the potential of using chitosan-based biopolymers as a novel therapeutic approach to treating these injuries. Chitosan-based biopolymers possess unique characteristics, including biocompatibility, biodegradability, and the ability to stimulate cell proliferation, making them highly suitable for repairing nerve defects and promoting nerve regeneration and functional recovery. Furthermore, these biopolymers can be utilized in drug delivery systems to control the release of therapeutic agents and facilitate the growth of nerve cells. This comprehensive review focuses on the latest advancements in utilizing chitosan-based biopolymers for peripheral nerve regeneration. By harnessing the potential of chitosan-based biopolymers, we can pave the way for innovative treatment strategies that significantly improve the outcomes of peripheral nerve injury repair, offering renewed hope and better prospects for patients in need.

Exploiting Polyhydroxyalkanoates for Biomedical Applications

Polyhydroxyalkanoates (PHA) are biodegradable plastic. Numerous bacteria produce PHAs under environmental stress conditions, such as excess carbon-rich organic matter and limitations of other nutritional elements such as potassium, magnesium, oxygen, phosphorus, and nitrogen. In addition to having physicochemical properties similar to fossil-fuel-based plastics, PHAs have unique features that make them ideal for medical devices, such as easy sterilization without damaging the material itself and easy dissolution following use. PHAs can replace traditional plastic materials used in the biomedical sector. PHAs can be used in a variety of biomedical applications, including medical devices, implants, drug delivery devices, wound dressings, artificial ligaments and tendons, and bone grafts. Unlike plastics, PHAs are not manufactured from petroleum products or fossil fuels and are, therefore, environment-friendly. In this review, a recent overview of applications of PHAs with special emphasis on biomedical sectors, including drug delivery, wound healing, tissue engineering, and biocontrols, are discussed.

Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review

The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.

3D Printed Personalized Nerve Guide Conduits for Precision Repair of Peripheral Nerve Defects

The treatment of peripheral nerve defects has always been one of the most challenging clinical practices in neurosurgery. Currently, nerve autograft is the preferred treatment modality for peripheral nerve defects, while the therapy is constantly plagued by the limited donor, loss of donor function, formation of neuroma, nerve distortion or dislocation, and nerve diameter mismatch. To address these clinical issues, the emerged nerve guide conduits (NGCs) are expected to offer effective platforms to repair peripheral nerve defects, especially those with large or complex topological structures. Up to now, numerous technologies are developed for preparing diverse NGCs, such as solvent casting, gas foaming, phase separation, freeze-drying, melt molding, electrospinning, and three-dimensional (3D) printing. 3D printing shows great potential and advantages because it can quickly and accurately manufacture the required NGCs from various natural and synthetic materials. This review introduces the application of personalized 3D printed NGCs for the precision repair of peripheral nerve defects and predicts their future directions.

Fabrication of a 3D Printed PCL Nerve Guide: In Vitro and In Vivo Testing

Nerve guides are medical devices designed to guide proximal and distal ends of injured peripheral nerves in order to assist regeneration of the damaged nerves. A 3D-printed polycaprolactone (PCL) nerve guide using an aligned gelatin-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) electrospun mat, seeded with PC12 and Schwann cells (SCs) is produced. During characterization with microCT and SEM porosity (55%), pore sizes (675 ± 40 µm), and fiber diameters (382 ± 25 µm) are determined. Electrospun fibers have degree of alignment of 7°, indicating high potential for guidance. On Day 14, PC12 cells migrated from proximal to distal end of nerve guide when SCs are seeded on the guide. After 28 days, over 95% of PC12 are alive and aligned. PC12 cells express early differentiation marker beta-tubulin 10 times more than late marker NeuN. In a 10 mm rat sciatic nerve injury, functional recovery evaluated by using static sciatic index (SSI) is observed in mat-free guides and guides containing mat and SCs. Nerve conduction velocities are also improved in these groups. Histological stainings showed tissue growth around nerve guides with highest new tissue organization being observed with mat and cell-free guides. These suggest 3D-printed PCL nerve guides have significant potential for treatment of peripheral nerve injuries.

Development and Advantages of Biodegradable PHA Polymers Based on Electrospun PHBV Fibers for Tissue Engineering and Other Biomedical Applications

Biodegradable polymeric biomaterials offer a significant advantage in disposable or fast-consuming products in medical applications. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is an example of a polyhydroxyalkanoate (PHA), i.e., one group of natural polyesters that are byproducts of reactions taking place in microorganisms in conditions with an excess carbon source. PHA polymers are a promising material for the production of everyday materials and biomedical applications. Due to the high number of monomers in the group, PHAs permit modifications enabling the production of copolymers of different compositions and with different proportions of individual monomers. In order to change and improve the properties of polymer fibers, PHAs are combined with either other natural and synthetic polymers or additives of inorganic phases. Importantly, electrospun PHBV fibers and mats showed an enormous potential in both the medical field (tissue engineering scaffolds, plasters, wound healing, drug delivery systems) and industrial applications (filter systems, food packaging). This Review summarizes the current state of the art in processing PHBV, especially by electrospinning, its degradation processes, and biocompatibility studies, starting from a general introduction to the PHA group of polymers.

Self-Assembling Hydrogel Structures for Neural Tissue Repair

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Hollow Fiber and Nanofiber Membranes in Bioartificial Liver and Neuronal Tissue Engineering

To date, the creation of biomimetic devices for the regeneration and repair of injured or diseased tissues and organs remains a crucial challenge in tissue engineering. Membrane technology offers advanced approaches to realize multifunctional tools with permissive environments well-controlled at molecular level for the development of functional tissues and organs. Membranes in fiber configuration with precisely controlled, tunable topography, and physical, biochemical, and mechanical cues, can direct and control the function of different kinds of cells toward the recovery from disorders and injuries. At the same time, fiber tools also provide the potential to model diseases in vitro for investigating specific biological phenomena as well as for drug testing. The purpose of this review is to present an overview of the literature concerning the development of hollow fibers and electrospun fiber membranes used in bioartificial organs, tissue engineered constructs, and in vitro bioreactors. With the aim to highlight the main biomedical applications of fiber-based systems, the first part reviews the fibers for bioartificial liver and liver tissue engineering with special attention to their multifunctional role in the long-term maintenance of specific liver functions and in driving hepatocyte differentiation. The second part reports the fiber-based systems used for neuronal tissue applications including advanced approaches for the creation of novel nerve conduits and in vitro models of brain tissue. Besides presenting recent advances and achievements, this work also delineates existing limitations and highlights emerging possibilities and future prospects in this field.

Polyhydroxyalkanoates: Next generation natural biomolecules and a solution for the world's future economy

Petrochemical plastics have become a cause of pollution for decades and finding alternative plastics that are environmental friendly. Polyhydroxyalkanoate (PHA), a biopolyester produced by microbial cells, has characteristics (biocompatible, biodegradable, non-toxic) that make it appropriate as a biodegradable plastic substance. The different forms of PHA make it suitable to a wide choice of products, from packaging materials to biomedical applications. The major challenge in commercialization of PHA is the cost of manufacturing. There are a lot of factors that could affect the efficiency of a development method. The development of new strategic parameters for better synthesis, including consumption of low cost carbon substrates, genetic modification of PHA-producing strains, and fermentational strategies are discussed. Recently, many efforts have been made to develop a method for the cost-effective production of PHAs. The isolation, analysis as well as characterization of PHAs are significant factors for any developmental process. Due to the biodegradable and biocompatible properties of PHAs, they are majorly used in biomedical applications such as vascular grafting, heart tissue engineering, skin tissue repairing, liver tissue engineering, nerve tissue engineering, bone tissue engineering, cartilage tissue engineering and therapeutic carrier. The emerging and interesting area of research is the development of self-healing biopolymer that could significantly broaden the operational life and protection of the polymeric materials for a broad range of uses. Biodegradable and biocompatible polymers are considered as the green materials in place of petroleum-based plastics in the future.

3D Printing and Bioprinting Nerve Conduits for Neural Tissue Engineering

Fabrication of nerve conduits for perfectly repairing or replacing damaged peripheral nerve is an urgent demand worldwide, but it is also a formidable clinical challenge. In the last decade, with the rapid development of manufacture technologies, 3D printing and bioprinting have been becoming remarkable stars in the field of neural engineering. In this review, we explore that the biomaterial inks (hydrogels, thermoplastic, and thermoset polyesters and composite) and bioinks have been selected for 3D printing and bioprinting of peripheral nerve conduits. This review covers 3D manufacturing technologies, including extrusion printing, inkjet printing, stereolithography, and bioprinting with inclusion of cells, bioactive molecules, and drugs. Finally, an outlook on the future directions of 3D printing and 4D printing in customizable nerve therapies is presented.

Microfluidic array chip based on excimer laser processing technology for the construction of in vitro graphical neuronal network

To construct a graphical neural network in vitro and explore the morphological effects of neural network structural changes on neurons, this study aimed to introduce a method for fabricating microfluidic array chips with different graphical structures based on 248-nm excimer laser one-step etching. Through the comparative analysis of the graphical neural network cultured on our microfluidic array chip with the one on the glass slide, the morphological effects of the neural network on the morphology of the neurons were studied. First, the design of the chip was completed according to the specific structure of the neurons and the simulation of the flow field. The chips were fabricated by excimer laser processing combined with the casting technology. Neurons were cultured on the chip, and a graphical neural network was formed. The growth status of the neural network was analyzed by microscopy and immunofluorescence technology, and compared with the random neural network cultured on glass slides. The results showed that the neurons on the array chips grew in microchannels, and neurites grew along the direction of the channel, interlacing to form a neural network. Furthermore, when the structure of the neural network was graphically changed, the internal neuron morphology changed: on the same culture days, the maximum length of the neurites of the graphical neural network was higher than the average length of the neurites of the random neural network. This research can provide the foundation for the exploration of the neural network mechanism of neurological diseases.

Nerve guide conduits for peripheral nerve injury repair: A review on design, materials and fabrication methods

Peripheral nerves can sustain injuries due to loss of structure and/or function of peripheral nerves because of accident, trauma and other causes, which leads to partial or complete loss of sensory, motor, and autonomic functions and neuropathic pain. Even with the extensive knowledge on the pathophysiology and regeneration mechanisms of peripheral nerve injuries (PNI), reliable treatment methods that ensure full functional recovery are scant. Nerve autografting is the current gold standard for treatment of PNI. Given the limitations of autografts including donor site morbidity and limited supply, alternate treatment methods are being pursued by the researchers. Neural guide conduits (NGCs) are increasingly being considered as a potential alternative to nerve autografts. The anatomy of peripheral nerves, classification of PNI, and current treatment methods are briefly yet succinctly reviewed. A detailed review on the various designs of NGCs, the different materials used for making the NGCs, and the fabrication methods adopted is presented in this work. Much progress had been made in all the aspects of making an NGC, including the design, materials and fabrication techniques. The advent of advanced technologies such as additive manufacturing and 3D bioprinting could be beneficial in easing the production of patient-specific NGCs. NGCs with supporting cells or stem cells, NGCs loaded with neurotropic factors and drugs, and 4D printed NGCs are some of the futuristic areas of interest. STATEMENT OF SIGNIFICANCE: Neural guide conduits (NGCs) are increasingly being considered as a potential alternative to nerve autografts in the treatment of peripheral nerve injuries. A detailed review on the various designs of NGCs, the different materials used for making the NGCs, and the fabrication methods (including Additive Manufacturing) adopted is presented in this work.

Fabrication and characterization of 3D microtubular collagen scaffolds for peripheral nerve repair

Understanding the structure-function relationship in biomaterial constructs is critical in optimizing biological outcomes. For ensheathed structures such as peripheral nerve, engineering implantable tissue substitutes has been challenging. This is due to a unique geometry of thin-walled microtube arrays composed mostly of basement membrane. In this work, we propose a sacrificial templating method to create Matrigel scaffolds that resemble endogenous peripheral nerve. These paralleled microtube constructs possess high void space and membrane-like walls. Additionally, we investigated the effect of chemical crosslinking in altering the physical, mechanical, and biologic properties of Matrigel. Results show that both glutaraldehyde and genipin increased the modulus and failure stress of Matrigel while also improving degradation resistance. However, glutaraldehyde crosslinking induced some cytotoxicity whereas genipin showed good biocompatibility. PC-12 cells, Schwann cells, and primary chick dorsal root ganglia cultured onto microtube scaffolds demonstrated viability up to 10 days. Strong cellular alignment along the channels was observed in Schwann cells whereas neurite outgrowth in primary chick dorsal root ganglia was also biased along the major axis of the microtubes. This suggests that the microtubes may mediate cell orientation and axon pathfinding. This proof of concept study provides a tunable workflow that may be adapted to other collagen types.

Peripheral Nerve Conduit: Materials and Structures

Peripheral nerve injuries (PNIs) are the most common injury types to affect the nervous system. Restoration of nerve function after PNI is a challenging medical issue. Extended gaps in transected peripheral nerves are only repaired using autologous nerve grafting. This technique, however, in which nerve tissue is harvested from a donor site and grafted onto a recipient site in the same body, has many limitations and disadvantages. Recent studies have revealed artificial nerve conduits as a promising alternative technique to substitute autologous nerves. This Review summarizes different types of artificial nerve grafts used to repair peripheral nerve injuries. These include synthetic and natural polymers with biological factors. Then, desirable properties of nerve guides are discussed based on their functionality and effectiveness. In the final part of this Review, fabrication methods and commercially available nerve guides are described.

The advances in nerve tissue engineering: From fabrication of nerve conduit to in vivo nerve regeneration assays

Peripheral nerve damage is a common clinical complication of traumatic injury occurring after accident, tumorous outgrowth, or surgical side effects. Although the new methods and biomaterials have been improved recently, regeneration of peripheral nerve gaps is still a challenge. These injuries affect the quality of life of the patients negatively. In the recent years, many efforts have been made to develop innovative nerve tissue engineering approaches aiming to improve peripheral nerve treatment following nerve injuries. Herein, we will not only outline what we know about the peripheral nerve regeneration but also offer our insight regarding the types of nerve conduits, their fabrication process, and factors associated with conduits as well as types of animal and nerve models for evaluating conduit function. Finally, nerve regeneration in a rat sciatic nerve injury model by nerve conduits has been considered, and the main aspects that may affect the preclinical outcome have been discussed.

Computational Design and Optimization of Nerve Guidance Conduits for Improved Mechanical Properties and Permeability

Nerve guidance conduits (NGCs) are tubular tissue engineering scaffolds used for nerve regeneration. The poor mechanical properties and porosity have always compromised their performances for guiding and supporting axonal growth. Therefore, in order to improve the properties of NGCs, the computational design approach was adopted to investigate the effects of different NGC structural features on their various properties, and finally design an ideal NGC with mechanical properties matching human nerves and high porosity and permeability. Three common NGC designs, namely hollow luminal, multichannel, and microgrooved, were chosen in this study. Simulations were conducted to study the mechanical properties and permeability. The results show that pore size is the most influential structural feature for NGC tensile modulus. Multichannel NGCs have higher mechanical strength but lower permeability compared to other designs. Square pores lead to higher permeability but lower mechanical strength than circular pores. The study finally selected an optimized hollow luminal NGC with a porosity of 71% and tensile modulus of 8 MPa to achieve multiple design requirements. The use of computational design and optimization was shown to be promising in future NGC design and nerve tissue engineering research.

Synthetic bioresorbable poly-α-hydroxyesters as peripheral nerve guidance conduits; a review of material properties, design strategies and their efficacy to date

Implantable tubular devices known as nerve guidance conduits (NGCs) have drawn considerable interest as an alternative to autografting in the repair of peripheral nerve injuries.

Micro and Nanofabrication methods to control cell-substrate interactions and cell behavior: A review from the tissue engineering perspective

Cell-substrate interactions play a crucial role in the design of better biomaterials and integration of implants with the tissues. Adhesion is the binding process of the cells to the substrate through interactions between the surface molecules of the cell membrane and the substrate. There are several factors that affect cell adhesion including substrate surface chemistry, topography, and stiffness. These factors physically and chemically guide and influence the adhesion strength, spreading, shape and fate of the cell. Recently, technological advances enabled us to precisely engineer the geometry and chemistry of substrate surfaces enabling the control of the interaction cells with the substrate. Some of the most commonly used surface engineering methods for eliciting the desired cellular responses on biomaterials are photolithography, electron beam lithography, microcontact printing, and microfluidics. These methods allow production of nano- and micron level substrate features that can control cell adhesion, migration, differentiation, shape of the cells and the nuclei as well as measurement of the forces involved in such activities. This review aims to summarize the current techniques and associate these techniques with cellular responses in order to emphasize the effect of chemistry, dimensions, density and design of surface patterns on cell-substrate interactions. We conclude with future projections in the field of cell-substrate interactions in the hope of providing an outlook for the future studies.

Poly(glycerol-sebacate)/poly(caprolactone)/graphene nanocomposites for nerve tissue engineering

In this study, mechanical, electrical, physical, and biological properties of polymeric matrixes comprising poly(glycerol-sebacate) (PGS) and poly(caprolactone) (PCL) with various weight ratio of PGS:PCL (1:3 and 1:1) were evaluated in order to apply as nerve guidance conduit. For this purpose, synthetic PGS pre-polymer was acquired using poly-condensation of glycerol and sebacic acid and characterized by attenuated total reflection-fourier transformed infrared (ATR-FTIR) and X-ray diffraction (XRD) spectroscopies. Furthermore, the effect of 1 wt% graphene (Gr) Nano sheets incorporation as filler, was investigated. Blending PGS with PCL significantly improves the hydrophilicity of the samples and improves cells attachment; however, their mechanical properties decreased dramatically. Presence of Gr within the polymeric matrix, significantly increased elastic modulus and tensile strength, which is possibly attributed to its superior mechanical properties and high aspect of ratio. Moreover, aforementioned polymeric matrixes, turned to conductive membranes by addition of Gr, which affected drastically on their biological properties; that way, 3, 4, 5-dimethylthiazol-2, 5-diphenyl tetrazolium bromide assay elucidated that only addition of 1 wt% Gr to the polymeric films resulted in improved cell survival and cell attachment for 7 days of cell seeding. In addition, cell attachment was enhanced considerably by increasing PGS up to 50 wt%, due to positive role of PGS on contact angle reduction. Therefore, the nano-composite film (50PGS-50PCL-1Gr) can be a promising substrate to use as a nerve guidance conduit.

Micropatterned biodegradable polyesters clicked with CQAASIKVAV promote cell alignment, directional migration, and neurite outgrowth

The interplay of microstructures and biological cues is critical to regulate the behaviors of Schwann cells (SCs) in terms of cellular spatial arrangement and directional migration as well as neurite orientation for bridging the proximal and distal stumps of the injured peripheral nervous system. In this study, stripe micropatterns having ridges/grooves of width 20/20 and 20/40 μm were fabricated on the surface of maleimide-functionalized biodegradable poly(ester carbonate) (P(LLA-MTMC)) films by the polydimethylsiloxane mold-pressing method, respectively. The laminin-derived CQAASIKVAV peptides end-capped with an SH group were then grafted by the thiol-ene click reaction under mild conditions to obtain micropatterned and peptide-grafted films. SCs cultured on these films, especially on the 20/40-μm film, displayed faster and aligned adhesion as well as a larger number of elongated cells with a higher length-to-width (L/W) ratio along the stripe direction than those on the flat-pep film. The migration rate of SCs was significantly enhanced in parallel to the stripe direction with a large net displacement. The micropatterned and peptide-grafted films, especially the 20/40-μm film, could promote SC proliferation and nerve growth factor (NGF) secretion in a manner similar to that of the peptide-grafted planar film. Moreover, the neurites of rat pheochromocytoma 12 (PC12) cells sprouted along the ridges with a longer average length on the micropatterned and peptide-grafted films. The synergistic effect of physical patterns and biological cues was evaluated by considering the results of cell adhesion force; immunofluorescence staining of vinculin; fluorescence staining of F-actin and the nucleus; as well as gene expression of neural cadherin (NCAD), neurocan (NCAN), and myelin protein zero (P0).

STATEMENT OF SIGNIFICANCE

The interplay of microstructures and biological cues is critical to regulate the behaviors of Schwann cells (SCs) and nerve cells, and thereby the regeneration of peripheral nerve system. In this study, the combined micropatterning and CQAASIKVAV grafting endowed the modified P(LLA-MTMC) films with both contact guidance and bioactive chemical cues to enhance cell proliferation, directional alignment and migration, longer net displacement and larger NGF secretion, and stronger neurite outgrowth of SCs and PC12 cells. Hence, the integration of physical micropatterns and bioactive molecules is an effective way to obtain featured biomaterials for the regeneration of nerves and other types of tissues.

Toward the Development of an Artificial Brain on a Micropatterned and Material-Regulated Biochip by Guiding and Promoting the Differentiation and Neurite Outgrowth of Neural Stem/Progenitor Cells

An in vitro model mimicking the in vivo environment of the brain must be developed to study neural communication and regeneration and to obtain an understanding of cellular and molecular responses. In this work, a multilayered neural network was successfully constructed on a biochip by guiding and promoting neural stem/progenitor cell differentiation and network formation. The biochip consisted of 3 × 3 arrays of cultured wells connected with channels. Neurospheroids were cultured on polyelectrolyte multilayer (PEM) films in the culture wells. Neurite outgrowth and neural differentiation were guided and promoted by the micropatterns and the PEM films. After 5 days in culture, a 3 × 3 neural network was constructed on the biochip. The function and the connections of the network were evaluated by immunocytochemistry and impedance measurements. Neurons were generated and produced functional and recyclable synaptic vesicles. Moreover, the electrical connections of the neural network were confirmed by measuring the impedance across the neurospheroids. The current work facilitates the development of an artificial brain on a chip for investigations of electrical stimulations and recordings of multilayered neural communication and regeneration.

Biomedical Applications of Polyhydroxyalkanoates

Polyhydroxyalkanoates (PHA) are produced by a large number of microbes under stress conditions such as high carbon (C) availability and limitations of nutrients such as nitrogen, potassium, phosphorus, magnesium, and oxygen. Here, microbes store C as granules of PHAs-energy reservoir. PHAs have properties, which are quite similar to those of synthetic plastics. The unique properties, which make them desirable materials for biomedical applications is their biodegradability, biocompatibility, and non-toxicity. PHAs have been found suitable for various medical applications: biocontrol agents, drug carriers, biodegradable implants, tissue engineering, memory enhancers, and anticancer agents.

Development of Nanofiber Sponges-Containing Nerve Guidance Conduit for Peripheral Nerve Regeneration in Vivo

In the study of hollow nerve guidance conduit (NGC), the dispersion of regenerated axons always confused researchers. To address this problem, filler-containing NGC was prepared, which showed better effect in the application of nerve tissue engineering. In this study, nanofiber sponges with abundant macropores, high porosity, and superior compressive strength were fabricated by electrospinning and freeze-drying. Poly(l-lactic acid-co-ε-caprolactone)/silk fibroin (PLCL/SF) nanofiber sponges were used as filler to prepare three-dimensional nanofiber sponges-containing (NS-containing) NGC. In order to study the effect of fillers for nerve regeneration, hollow NGC was set as control. In vitro cell viability studies indicated that the NS-containing NGC could enhance the proliferation of Schwann cells (SCs) due to the macroporous structure. The results of hematoxylin-eosin (HE) and immunofluorescence staining confirmed that SCs infiltrated into the nanofiber sponges. Subsequently, the NS-containing NGC was implanted in a rat sciatic nerve defect model to evaluate the effect in vivo. NS-containing NGC group performed better in nerve function recovery than hollow NGC group. In consideration of the walking track and triceps weight analysis, NS-containing NGC was close to the autograft group. In addition, histological and morphological analyses with HE and toluidine blue (TB) staining, and transmission electron microscope (TEM) were conducted. Better nerve regeneration was observed on NS-containing NGC group both quantitatively and qualitatively. Furthermore, the results of three indexes' immuno-histochemistry and two indexes' immunofluorescence all indicated good nerve regeneration of NS-containing NGC as well, compared with hollow NGC. The results demonstrated NS-containing NGC had great potential in the application of peripheral nerve repair.

Direct Laser Writing of Tubular Microtowers for 3D Culture of Human Pluripotent Stem Cell-Derived Neuronal Cells

As the complex structure of nervous tissue cannot be mimicked in two-dimensional (2D) cultures, the development of three-dimensional (3D) neuronal cell culture platforms is a topical issue in the field of neuroscience and neural tissue engineering. Computer-assisted laser-based fabrication techniques such as direct laser writing by two-photon polymerization (2PP-DLW) offer a versatile tool to fabricate 3D cell culture platforms with highly ordered geometries in the size scale of natural 3D cell environments. In this study, we present the design and 2PP-DLW fabrication process of a novel 3D neuronal cell culture platform based on tubular microtowers. The platform facilitates efficient long-term 3D culturing of human neuronal cells and supports neurite orientation and 3D network formation. Microtower designs both with or without intraluminal guidance cues and/or openings in the tower wall are designed and successfully fabricated from Ormocomp. Three of the microtower designs are chosen for the final culture platform: a design with openings in the wall and intralumial guidance cues (webs and pillars), a design with openings but without intraluminal structures, and a plain cylinder design. The proposed culture platform offers a promising concept for future 3D cultures in the field of neuroscience.

Nerve guidance conduit with a hybrid structure of a PLGA microfibrous bundle wrapped in a micro/nanostructured membrane

Nerve repair in tissue engineering involves the precise construction of a scaffold to guide nerve cell regeneration in the desired direction. However, improvements are needed to facilitate the cell migration/growth rate of nerves in the center of a nerve conduit. In this paper, we propose a nerve guidance conduit with a hybrid structure comprising a microfibrous poly(lactic-co-glycolic acid) (PLGA) bundle wrapped in a micro/nanostructured PLGA membrane. We applied sequential fabrication processes, including photolithography, nano-electroforming, and polydimethylsiloxane casting to manufacture master molds for the repeated production of the PLGA subelements. After demolding it from the master molds, we rolled the microfibrous membrane into a bundle and then wrapped it in the micro/nanostructured membrane to form a nerve-guiding conduit. We used KT98/F1B-GFP cells to estimate the migration rate and guidance ability of the fabricated nerve conduit and found that both elements increased the migration rate 1.6-fold compared with a flat PLGA membrane. We also found that 90% of the cells in the hybrid nano/microstructured membrane grew in the direction of the designed patterns. After 3 days of culturing, the interior of the nerve conduit was filled with cells, and the microfiber bundle was also surrounded by cells. Our conduit cell culture results also demonstrate that the proposed micro/nanohybrid and microfibrous structures can retain their shapes. The proposed hybrid-structured conduit demonstrates a high capability for guiding nerve cells and promoting cell migration, and, as such, is feasible for use in clinical applications.

Third generation poly(hydroxyacid) composite scaffolds for tissue engineering

Bone tissue engineering based on scaffolds is quite a complex process as a whole gamut of criteria needs to be satisfied to promote cellular attachment, proliferation and differentiation: biocompatibility, right surface properties, adequate mechanical performance, controlled bioresorbability, osteoconductivity, angiogenic cues, and vascularization. Third generation scaffolds are more of composite types to maximize biological-mechanical-chemical properties. In the present review, our focus is on the performance of micro-organism-derived polyhydroxyalkanoates (PHAs)-polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-valerate (PHBV)-composite scaffolds with ceramics and natural polymers for tissue engineering applications with emphasis on bone tissue. We particularly emphasize on how material properties of the composites affect scaffold performance. PHA-based composites have demonstrated their biocompatibility with a range of tissues and their capacity to induce osteogenesis due to their piezoelectric properties. Electrospun PHB/PHBV fiber mesh in combination with human adipose tissue-derived stem cells (hASCs) were shown to improve vascularization in engineered bone tissues. For nerve and skin tissue engineering applications, natural polymers such as collagen and chitosan remain the gold standard but there is scope for development of scaffolds combining PHAs with other natural polymers which can address some of the limitations such as brittleness, lack of bioactivity and slow degradation rate presented by the latter. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1667-1684, 2017.

Conductive composite fibres from reduced graphene oxide and polypyrrole nanoparticles

Wet–spun composite fibres from graphene and polypyrrole nanoparticles show appropriate mechanical properties, high electrical conductivity and good cytocompatibility.

Nanostructured Polyaniline Coating on ITO Glass Promotes the Neurite Outgrowth of PC 12 Cells by Electrical Stimulation

A conducting polymer polyaniline (PANI) with nanostructure was synthesized on indium tin oxide (ITO) glass. The effect of electrical stimulation on the proliferation and the length of neurites of PC 12 cells was investigated. The dynamic protein adsorption on PANI and ITO surfaces in a cell culture medium was also compared with and without electrical stimulation. The adsorbed proteins were characterized using SDS-PAGE. A PANI coating on ITO surface was shown with 30-50 nm spherical nanostructure. The number of PC 12 cells was significantly greater on the PANI/ITO surface than on ITO and plate surfaces after cell seeding for 24 and 36 h. This result confirmed that the PANI coating is nontoxic to PC 12 cells. The electrical stimulation for 1, 2, and 4 h significantly enhanced the cell numbers for both PANI and ITO conducting surfaces. Moreover, the application of electrical stimulation also improved the neurite outgrowth of PC 12 cells, and the number of PC 12 cells with longer neurite lengths increased obviously under electrical stimulation for the PANI surface. From the mechanism, the adsorption of DMEM proteins was found to be enhanced by electrical stimulation for both PANI/ITO and ITO surfaces. A new band 2 (around 37 kDa) was observed from the collected adsorbed proteins when PC 12 cells were cultured on these surfaces, and culturing PC 12 cells also seemed to increase the amount of band 1 (around 90 kDa). When immersing PANI/ITO and ITO surfaces in a DMEM medium without a cell culture, the number of band 3 (around 70 kDa) and band 4 (around 45 kDa) proteins decreased compared to that of PC 12 cell cultured surfaces. These results are valuable for the design and improvement of the material performance for neural regeneration.