The improvement of fibroblast growth on hydrophobic biopolyesters by coating with polyhydroxyalkanoate granule binding protein PhaP fused with cell adhesion motif RGD

Nature-inspired material binding peptides with versatile polyester affinities and binding strengths

Biodegradable polyesters, such as polyhydroxyalkanoates (PHAs), are having a tremendous impact on biomedicine. However, these polymers lack functional moieties to impart functions like targeted delivery of molecules. Inspired by native GAPs, such as phasins and their polymer-binding and surfactant properties, we generated small material binding peptides (MBPs) for polyester surface functionalization using a rational approach based on amphiphilicity. Here, two peptides of 48 amino acids derived from phasins PhaF and PhaI from Pseudomonas putida, MinP and the novel-designed MinI, were assessed for their binding towards two types of PHAs, PHB and PHOH. In vivo, fluorescence studies revealed selective binding towards PHOH, whilst in vitro binding experiments using the Langmuir-Blodgett technique coupled to ellipsometry showed KD in the range of nM for all polymers and MBPs. Marked morphological changes of the polymer surface upon peptide adsorption were shown by BAM and AFM for PHOH. Moreover, both MBPs were successfully used to immobilize cargo proteins on the polymer surfaces. Altogether, this work shows that by redesigning the amphiphilicity of phasins, a high affinity but lower specificity to polyesters can be achieved in vitro. Furthermore, the MBPs demonstrated binding to PET, showing potential to bind cargo molecules also to synthetic polyesters.

3D printed Styrax Liquidus (Liquidambar orientalis Miller)-loaded poly (L-lactic acid)/chitosan based wound dressing material: Fabrication, characterization, and biocompatibility results

The medicinal plant of Styrax liquidus (ST) (sweet gum balsam) which extracted from Liquidambar orientalis Mill tree, was loaded into the 3D printed polylactic acid (PLA)/chitosan (CS) based 3D printed scaffolds to investigate its wound healing and closure effect, in this study. The morphological and chemical properties of the ST loaded 3D printed scaffolds with different concentrations (1 %, 2 %, and 3 % wt) were investigated by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FT-IR), respectively. In addition, the mechanical and thermal properties of the materials were investigated by Tensile test and Differential Scanning Calorimetry (DSC), respectively. The antimicrobial activities of the ST loaded 3D printed scaffolds and their incubation media in the PBS (pH 7.4, at 37 °C for 24 h) were investigated on two Gram-positive and two Gram-negative standard pathogenic bacteria with the agar disc diffusion method. The colorimetric MTT assay was used to determine the cell viability of human fibroblast cells (CCD-1072Sk) incubated with free ST, ST loaded, and unloaded 3D printed scaffolds. The 1 % and 2 % (wt) ST loaded PLA/CS/ST 3D printed scaffolds showed an increase in the cell number. Annexin V/PI double stain assay was performed to test whether early or late apoptosis was induced in the PLA/CS/1 % ST and PLA/CS/2 % ST loaded groups and the results were consistent with the MTT assay. Furthermore, a wound healing assay was carried out to investigate the effect of ST loaded 3D printed scaffolds on wound healing in CCD-1072Sk cells. The highest wound closure compared to the control group was observed on cells treated with PLA/CS/1 % ST for 72 h. According to the results, novel biocompatible ST loaded 3D printed scaffolds with antimicrobial effect can be used as wound healing material for potential tissue engineering applications.

3D printed reduced graphene oxide-GelMA hybrid hydrogel scaffolds for potential neuralized bone regeneration

Peripheral nerves participate in bone growth and repair by secreting neurotransmitters, and enable new bone to possess physiological bone-sensing capability. However, it is difficult to achieve synchronized nerve regeneration during the healing process of large bone defects at present. As a bioactive nanomaterial, reduced graphene oxide (rGO) can promote neuronal differentiation and myelination of Schwann cells (SCs), while enhancing the adhesion and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) through its strong non-covalent binding ability. In this study, 3D printing-based rGO/GelMA hydrogels with enhanced osteogenic and neurogenic dual differentiation were used to simultaneously load SCs and BMSCs. By changing the concentration of rGO(0.03%/0.05%/0.1%), the compressive strength, rheological properties and aperture of the hydrogel can be improved. In vitro, cell live/death staining, phalloidin staining and SEM showed that cells loaded on the hydrogel had a high survival rate (85%) and good adhesion ability. In vivo, we found that the rGO/GelMA hydrogel exhibited the same low inflammatory response compared to the pure-GelMA group and the cell-only group, but surrounded by collagen fibers. Meanwhile, the osteogenic and neural proteins in the rGO/GelMA group were found to be highly expressed in immunohistochemistry and immunofluorescence. In this study, a scaffold material containing double cells was used to promote synergistic regeneration of nerves and bone, providing a promising strategy for the preparation of personalized and functionalized biomimetic bone material.

Influence of PHA Substrate Surface Characteristics on the Functional State of Endothelial Cells

The needs of modern regenerative medicine for biodegradable polymers are wide and varied. Restoration of the viability of the vascular tree is one of the most important components of the preservation of the usefulness of organs and tissues. The creation of vascular implants compatible with blood is an important task of vascular bioengineering. The function of the endothelial layer of the vessel, being largely responsible for the development of thrombotic complications, is of great importance for hemocompatibility. The development of surfaces with specific characteristics of biomaterials that are used in vascular technologies is one of the solutions for their correct endothelialization. Linear polyhydroxyalkanoates (PHAs) are biodegradable structural polymeric materials suitable for obtaining various types of implants and tissue engineering, having a wide range of structural and physicomechanical properties. The use of PHA of various monomeric compositions in endothelial cultivation makes it possible to evaluate the influence of material properties, especially surface characteristics, on the functional state of cells. It has been established that PHA samples with the inclusion of 3-hydroxyhexanoate have optimal characteristics for the formation of a human umbilical vein endothelial cell, HUVEC, monolayer in terms of cell morphology as well as the levels of expression of vinculin and VE-cadherin. The obtained results provide a rationale for the use of PHA copolymers as materials for direct contact with the endothelium in vascular implants.

Microbial-Derived Polyhydroxyalkanoate-Based Scaffolds for Bone Tissue Engineering: Biosynthesis, Properties, and Perspectives

Polyhydroxyalkanoates (PHAs) are a class of structurally diverse natural biopolyesters, synthesized by various microbes under unbalanced culture conditions. PHAs as biomedical materials have been fabricated in various forms to apply to tissue engineering for the past years due to their excellent biodegradability, inherent biocompatibility, modifiable mechanical properties, and thermo-processability. However, there remain some bottlenecks in terms of PHA production on a large scale, the purification process, mechanical properties, and biodegradability of PHA, which need to be further resolved. Therefore, scientists are making great efforts via synthetic biology and metabolic engineering tools to improve the properties and the product yields of PHA at a lower cost for the development of various PHA-based scaffold fabrication technologies to widen biomedical applications, especially in bone tissue engineering. This review aims to outline the biosynthesis, structures, properties, and the bone tissue engineering applications of PHA scaffolds with different manufacturing technologies. The latest advances will provide an insight into future outlooks in PHA-based scaffolds for bone tissue engineering.

Inflammatory Modulation of Polyethylene Glycol-AuNP for Regulation of the Neural Differentiation Capacity of Mesenchymal Stem Cells

A nanocomposite composed of polyethylene glycol (PEG) incorporated with various concentrations (~17.4, ~43.5, ~174 ppm) of gold nanoparticles (Au) was created to investigate its biocompatibility and biological performance in vitro and in vivo. First, surface topography and chemical composition was determined through UV-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), free radical scavenging ability, and water contact angle measurement. Additionally, the diameters of the PEG-Au nanocomposites were also evaluated through dynamic light scattering (DLS) assay. According to the results, PEG containing 43.5 ppm of Au demonstrated superior biocompatibility and biological properties for mesenchymal stem cells (MSCs), as well as superior osteogenic differentiation, adipocyte differentiation, and, particularly, neuronal differentiation. Indeed, PEG-Au 43.5 ppm induced better cell adhesion, proliferation and migration in MSCs. The higher expression of the SDF-1α/CXCR4 axis may be associated with MMPs activation and may have also promoted the differentiation capacity of MSCs. Moreover, it also prevented MSCs from apoptosis and inhibited macrophage and platelet activation, as well as reactive oxygen species (ROS) generation. Furthermore, the anti-inflammatory, biocompatibility, and endothelialization capacity of PEG-Au was measured in a rat model. After implanting the nanocomposites into rats subcutaneously for 4 weeks, PEG-Au 43.5 ppm was able to enhance the anti-immune response through inhibiting CD86 expression (M1 polarization), while also reducing leukocyte infiltration (CD45). Moreover, PEG-Au 43.5 ppm facilitated CD31 expression and anti-fibrosis ability. Above all, the PEG-Au nanocomposite was evidenced to strengthen the differentiation of MSCs into various cells, including fat, vessel, and bone tissue and, particularly, nerve cells. This research has elucidated that PEG combined with the appropriate amount of Au nanoparticles could become a potential biomaterial able to cooperate with MSCs for tissue regeneration engineering.

From Residues to Added-Value Bacterial Biopolymers as Nanomaterials for Biomedical Applications

Bacterial biopolymers are naturally occurring materials comprising a wide range of molecules with diverse chemical structures that can be produced from renewable sources following the principles of the circular economy. Over the last decades, they have gained substantial interest in the biomedical field as drug nanocarriers, implantable material coatings, and tissue-regeneration scaffolds or membranes due to their inherent biocompatibility, biodegradability into nonhazardous disintegration products, and their mechanical properties, which are similar to those of human tissues. The present review focuses upon three technologically advanced bacterial biopolymers, namely, bacterial cellulose (BC), polyhydroxyalkanoates (PHA), and γ-polyglutamic acid (PGA), as models of different carbon-backbone structures (polysaccharides, polyesters, and polyamides) produced by bacteria that are suitable for biomedical applications in nanoscale systems. This selection models evidence of the wide versatility of microorganisms to generate biopolymers by diverse metabolic strategies. We highlight the suitability for applied sustainable bioprocesses for the production of BC, PHA, and PGA based on renewable carbon sources and the singularity of each process driven by bacterial machinery. The inherent properties of each polymer can be fine-tuned by means of chemical and biotechnological approaches, such as metabolic engineering and peptide functionalization, to further expand their structural diversity and their applicability as nanomaterials in biomedicine.

Bio-specific immobilization of enzymes on electrospun PHB nanofibers

Enzyme immobilization provides substantial advantages in terms of improving the efficiency of enzymatic process as well as enhancing the reusability of enzymes. Phasins (PhaPs) are naturally occurring polyhydroxyalkanoate (PHA)-binding proteins, and thus can potentially be used as a fusion partner for oriented immobilization of enzymes onto PHA supports. However, presently available granular PHA supports have low surface-area-to-volume ratio and limited configurational flexibility of enzymatic reactions. In this study, we explored the use of electrospun polyhydroxybutyrate (PHB) nanofibers as an alternative support for high density immobilization of a PhaP-fused lipase. As envisioned, the electrospun PHB nanofibers could anchor 120-fold more enzyme than PHB granules of the same weight. Furthermore, the enzymes immobilized onto the PHB nanofibers exhibited markedly higher stability and activity compared to when immobilized on conventional immobilization supports. Our approach combines the advantageous features of nanofibrous material and specificity of biomolecular interaction for the efficient use of enzymes, which can be widely adopted in the development of various enzymatic processes.

Dissecting the Polyhydroxyalkanoate-Binding Domain of the PhaF Phasin: Rational Design of a Minimized Affinity Tag

Phasin PhaF from Pseudomonas putida consists of a modular protein whose N-terminal domain (BioF) has been demonstrated to be responsible for binding to the polyhydroxyalkanoate (PHA) granule. BioF has been exploited for biotechnological purposes as an affinity tag in the functionalization of PHA beads with fusion proteins both in vivo and in vitro The structural model of this domain suggests an amphipathic α-helical conformation with the hydrophobic residues facing the PHA granule. In this work, we analyzed the mean hydrophobicity and the hydrophobic moment of the native BioF tag to rationally design shorter versions that maintain affinity for the granule. Hybrid proteins containing the green fluorescent protein (GFP) fused to the BioF derivatives were studied for in vivo localization on PHA, stability on the surface of the PHA granule against pH, temperature, and ionic strength, and their possible influence on PHA synthesis. Based on the results obtained, a minimized BioF tag for PHA functionalization has been proposed (MinP) that retains similar binding properties but possesses an attractive biotechnological potential derived from its reduced size. The MinP tag was further validated by analyzing the functionality and stability of the fusion proteins MinP-β-galactosidase and MinP-CueO from Escherichia coliIMPORTANCE Polyhydroxyalkanoates (PHAs) are biocompatible, nontoxic, and biodegradable biopolymers with exceptional applications in the industrial and medical fields. The complex structure of the PHA granule can be exploited as a toolbox to display molecules of interest on their surface. Phasins, the most abundant group of proteins on the granule, have been employed as anchoring tags to obtain functionalized PHA beads for high-affinity bioseparation, enzyme immobilization, diagnostics, or cell targeting. Here, a shorter module based on the previously designed BioF tag has been demonstrated to maintain the affinity for the PHA granule, with higher stability and similar functionalization efficiency. The use of a 67% shorter peptide, which maintains the binding properties of the entire protein, constitutes an advantage for the immobilization of recombinant proteins on the PHA surface both in vitro and in vivo.

Biofunctionalization of zirconia with cell-adhesion peptides via polydopamine crosslinking for soft tissue engineering: effects on the biological behaviors of human gingival fibroblasts and oral bacteria

Rapid soft tissue integration is essential for long-term dental implant success. Zirconia is increasingly used as an abutment material owing to its excellent aesthetic properties and biocompatibility; however, it is bioinert, and tissue integration is poor. We developed a feasible surface modification method, exploiting the reactivity of polydopamine (PDA) films to immobilize cell-adhesion peptides (Arg-Gly-Asp, RGD) onto zirconia abutment surfaces. Further, we evaluated the effect thereof on human gingival fibroblast (HGF) behavior and oral bacterial adhesion, which influence the peri-implant soft tissue seal. HGF responses to linear KGGRGDSP and cyclic RGDfK sequences were compared. PDA deposition and covalent coupling of RGD were verified by X-ray photoelectron spectroscopy and fluorescence microscopy. The biological behaviors of HGFs on the modified zirconia; i.e., adhesion, spreading, proliferation, gene and protein expression, were elucidated. Biofunctionalization of zirconia with the adhesion peptides significantly enhanced the biological activities of HGFs. Cyclic RGD induced slightly improved cell attachment, spreading, and proliferation, but similar cell differentiation when compared to linear RGD peptides. To assess their antimicrobial properties, the different substrates were exposed to cultures of the early colonizer Streptococcus mutans or the periodontal pathogen Porphyromonas gingivalis, and bacterial adhesion was evaluated by scanning electron microscopy and live/dead staining. PDA and PDA-RGD coatings decreased zirconia surface colonization by both bacterial species to similar extents. Thus, PDA-RGD-functionalized zirconia modulates specific HGF responses, while maintaining the antimicrobial activity of the PDA coating. The selective bio-interaction pattern of this surface modification holds great promise for improving soft-tissue integration around zirconia abutments in clinical applications.

Biofunctionalization of zirconia with cell-adhesion peptides via polydopamine and its effect on HGFs/bacterial adhesion for enhanced soft tissue seal.

Development of Nontoxic Biodegradable Polyurethanes Based on Polyhydroxyalkanoate and L-lysine Diisocyanate with Improved Mechanical Properties as New Elastomers Scaffolds

A nontoxic and biodegradable polyurethane was prepared, characterized, and evaluated for biomedical applications. Stretchable, biodegradable, and biocompatible polyurethanes (LPH) based on L-lysine diisocyanate (LDI) with poly(ethylene glycol) (PEG) and polyhydroxyalkanoates(PHA) of different molar ratios were synthesized. The chemical and physical characteristics of the LPH films are tunable, enabling the design of mechanically performance, hydrophilic, and biodegradable behavior. The LPH films have a Young's modulus, tensile strength, and elongation at break in the range of 3.07-25.61 MPa, 1.01-9.49 MPa, and 102-998%, respectively. The LPH films demonstrate different responses to a change of temperature from 4 to 37 °C, with the swelling ratio for the same sample at equilibrium varying from 184% to 151%. In vitro degradation tests show the same LPH film has completely different degradation morphologies in pH of 3, 7.4, and 11 phosphate buffered solution (PBS). In vitro cell tests show feasibility that some of the LPH films are suitable for culturing rat bone marrow stem cells (rBMSCs), for future soft-tissue regeneration. The results demonstrate the feasibility of the LPH scaffolds for many biomedical applications.

Peptide-Functionalized Nanostructured Microarchitectures Enable Rapid Mechanotransductive Differentiation

Microenvironmental factors play critical roles in regulating stem cell fate, providing a rationale to engineer biomimetic microenvironments that facilitate rapid and effective stem cell differentiation. Three-dimensional (3D) hierarchical microarchitectures have been developed to enable rapid neural differentiation of multipotent human mesenchymal stromal cells (HMSCs) via mechanotransduction. However, low cell viability during long-term culture and poor cell recovery efficiency from the architectures were also observed. Such problems hinder further applications of the architectures in stem cell differentiation. Here, we present improved 3D nanostructured microarchitectures functionalized with cell-adhesion-promoting arginylglycylaspartic acid (RGD) peptides. These RGD-functionalized architectures significantly upregulated long-term cell viability and facilitated effective recovery of differentiated cells from the architectures while maintaining high differentiation efficiency. Efficient recovery of highly viable differentiated cells enabled the downstream analysis of morphology and protein expression to be performed. Remarkably, even after the removal of the mechanical stimulus provided by the 3D microarchitectures, the recovered HMSCs showed a neuron-like elongated morphology for 10 days and consistently expressed microtubule-associated protein 2, a mature neural marker. RGD-functionalized nanostructured microarchitectures hold great potential to guide effective differentiation of highly viable stem cells.

Integrating 3D-printed PHBV/Calcium sulfate hemihydrate scaffold and chitosan hydrogel for enhanced osteogenic property

We developed the 3D-printed poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/calcium sulfate hemihydrate (PHBV/CaSH) scaffolds by using fused deposition modelling (FDM) technique and then coated the scaffolds with chitosan (CS) acetic acid solution. After drying and neutralization, CS hydrogel was formed on the surface of the scaffolds. The resultant PHBV/CaSH/CS scaffolds could promote the adhesion and proliferation of rat bone marrow stromal cells (rBMSCs) and enhance the osteogenesis of rBMSCs by up-regulating the expression level of osteogenic genes compared to the PHBV and PHBV/CaSH scaffolds. In vivo studies further demonstrated the PHBV/CaSH/CS scaffolds could effectively promote new bone formation. Therefore, integrating 3D-printed PHBV/CaSH scaffold and CS hrydogel represents a novel strategy to promote osteogensis property, showing full potential for bone defects repair.

A Single-Step Surface Modification of Electrospun Silica Nanofibers Using a Silica Binding Protein Fused with an RGD Motif for Enhanced PC12 Cell Growth and Differentiation

In this study, a previously known high-affinity silica binding protein (SB) was genetically engineered to fuse with an integrin-binding peptide (RGD) to create a recombinant protein (SB-RGD). SB-RGD was successfully expressed in Escherichia coli and purified using silica beads through a simple and fast centrifugation method. A further functionality assay showed that SB-RGD bound to the silica surface with an extremely high affinity that required 2 M MgCl₂ for elution. Through a single-step incubation, the purified SB-RGD proteins were noncovalently coated onto an electrospun silica nanofiber (SNF) substrate to fabricate the SNF-SB-RGD substrate. SNF-SB-RGD was characterized by a combination of scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and immunostaining fluorescence microscopy. As PC12 cells were seeded onto the SNF-SB-RGD surface, significantly higher cell viability and longer neurite extensions were observed when compared to those on the control surfaces. These results indicated that SB-RGD could serve as a noncovalent coating biologic to support and promote neuron growth and differentiation on silica-based substrates for neuronal tissue engineering. It also provides proof of concept for the possibility to genetically engineer protein-based signaling molecules to noncovalently modify silica-based substrates as bioinspired material.

Anti-infective biomaterials with surface-decorated tachyplesin I

Implants decorated with antimicrobial peptides (AMPs) can prevent infection and reduce the risk of creating antibiotic resistance. Yet the restricted mobility of surficial AMP often compromises its activity. Here, we report a simple but effective strategy to allow a more flexible display of AMP on the biomaterial surface and demonstrate its efficacy for wound healing. The AMP, tachyplesin I (Tac), is tagged with the polyhydroxyalkanoate-granule-associated protein (PhaP) and immobilized on haloarchaea-produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) via hydrophobic interaction. The PhaP-Tac coating effectively inhibits the growth of both Gram-negative and Gram-positive bacteria. It also increases the surface hydrophilicity to improve fibroblast proliferation in vitro, and accelerates wound healing by decreasing bacterial counts to below 10⁵ CFU per gram of tissue in a deep-wound mouse model in vivo. Taken together, these findings demonstrate an effective strategy to realize the full potential of AMPs in imparting implants with an anti-microbial activity that is localized and potent.

Poly-3-Hydroxybutyrate Functionalization with BioF-Tagged Recombinant Proteins

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters that accumulate in the cytoplasm of certain bacteria. One promising biotechnological application utilizes these biopolymers as supports for protein immobilization. Here, the PHA-binding domain of the Pseudomonas putida KT2440 PhaF phasin (BioF polypeptide) was investigated as an affinity tag for the in vitro functionalization of poly-3-hydroxybutyrate (PHB) particles with recombinant proteins, namely, full-length PhaF and two fusion proteins tagged to BioF (BioF-C-LytA and BioF-β-galactosidase, containing the choline-binding module C-LytA and the β-galactosidase enzyme, respectively). The protein-biopolyester interaction was strong and stable at a wide range of pHs and temperatures, and the bound protein was highly protected from self-degradation, while the binding strength could be modulated by coating with amphiphilic compounds. Finally, BioF-β-galactosidase displayed very stable enzymatic activity after several continuous activity-plus-washing cycles when immobilized in a minibioreactor. Our results demonstrate the potentialities of PHA and the BioF tag for the construction of novel bioactive materials.IMPORTANCE Our results confirm the biotechnological potential of the BioF affinity tag as a versatile tool for functionalizing PHA supports with recombinant proteins, leading to novel bioactive materials. The wide substrate range of the BioF tag presumably enables protein immobilization in vitro of virtually all natural PHAs as well as blends, copolymers, or artificial chemically modified derivatives with novel physicochemical properties. Moreover, the strength of protein adsorption may be easily modulated by varying the coating of the support, providing new perspectives for the engineering of bioactive materials that require a tight control of protein loading.

An integrated multi-layer 3D-fabrication of PDA/RGD coated graphene loaded PCL nanoscaffold for peripheral nerve restoration

As a conductive nanomaterial, graphene has huge potentials in nerve function restoration by promoting electrical signal transduction and metabolic activities with unique topological properties. Polydopamine (PDA) and arginylglycylaspartic acid (RGD) can improve cell adhesion in tissue engineering. Here we report an integrated 3D printing and layer-by-layer casting (LBLC) method in multi-layered porous scaffold fabrication. The scaffold is composed of single-layered graphene (SG) or multi-layered graphene (MG) and polycaprolactone (PCL). The electrically conductive 3D graphene scaffold can significantly improve neural expression both in vitro and in vivo. It promotes successful axonal regrowth and remyelination after peripheral nerve injury. These findings implicate that graphene-based nanotechnology have great potentials in peripheral nerve restoration in preclinical and clinical application.

Polyhydroxyalkanoate-associated phasins as phylogenetically heterogeneous, multipurpose proteins

Polyhydroxyalkanoates (PHAs) are natural polyesters of increasing biotechnological importance that are synthesized by many prokaryotic organisms as carbon and energy storage compounds in limiting growth conditions. PHAs accumulate intracellularly in form of inclusion bodies that are covered with a proteinaceous surface layer (granule-associated proteins or GAPs) conforming a network-like surface of structural, metabolic and regulatory polypeptides, and configuring the PHA granules as complex and well-organized subcellular structures that have been designated as 'carbonosomes'. GAPs include several enzymes related to PHA metabolism (synthases, depolymerases and hydroxylases) together with the so-called phasins, an heterogeneous group of small-size proteins that cover most of the PHA granule and that are devoid of catalytic functions but nevertheless play an essential role in granule structure and PHA metabolism. Structurally, phasins are amphiphilic proteins that shield the hydrophobic polymer from the cytoplasm. Here, we summarize the characteristics of the different phasins identified so far from PHA producer organisms and highlight the diverse opportunities that they offer in the Biotechnology field.

Applications of Microbial Biopolymers in Display Technology

Microorganisms produce a variety of different polymers such as polyamides, polysaccharides, and polyesters. The polyesters, the polyhydroxyalkanoates (PHAs), are the most extensively studied polymers in regard to their use in display technology. The material properties of bacterial PHAs in combination with their biocompatibility and biodegradability make them attractive substrates for use in display technology applications. By translationally fusing bioactive molecules to a gene encoding a PHA-binding domain, the appropriate functionalization for a given application can be achieved such that the need for chemical immobilization is circumvented. By separately extracting and processing the biopolymer, using it to coat a surface, and then treating this surface with the fusion proteins, surface functionalization for immunodiagnostic microarray or tissue engineering applications can be accomplished. Conversely, by expressing the fusion protein directly in the PHA-producing organisms, one-step production of functionalized beads can be achieved. Such beads have been demonstrated in diverse applications, including fluorescence-activated cell sorting, enzyme-linked immunosorbent assays, microarrays, diagnostic skin test for tuberculosis, vaccines, protein purification, and affinity bioseparation.

Structural Insights on PHA Binding Protein PhaP from Aeromonas hydrophila

Phasins or PhaPs are a group of amphiphilic proteins that are found attached to the surface of microbial polyhydroxyalkanoate (PHA) granules. They have both structural and regulatory functions and can affect intracellular PHA accumulation and mediate protein folding. The molecular basis for the diverse functions of the PhaPs has not been fully understood due to the lack of the structural knowledge. Here we report the structural and biochemical studies of the PhaP cloned from Aeromonas hydrophila (PhaP_Ah), which is utilized in protein and tissue engineering. The crystal structure of PhaP_Ah was revealed to be a tetramer with 8 α-helices adopting a coiled-coil structure. Each monomer has a hydrophobic and a hydrophilic surface, rendering the surfactant properties of the PhaP_Ah monomer. Based on the crystal structure, we predicted three key amino acid residues and obtained mutants with enhanced stability and improved emulsification properties. The first PhaP crystal structure, as reported in this study, is an important step towards a mechanistic understanding of how PHA is formed in vivo and why PhaP has such unique surfactant properties. At the same time, it will facilitate the study of other PhaP members that may have significant biotechnological potential as bio-surfactants and amphipathic coatings.

Fabrication, characterization, and biological assessment of multilayer laminin γ2 DNA coatings on titanium surfaces

The purpose of this work was to fabricate a multilayer laminin γ2 DNA coating on a titanium surface and evaluate its biological properties. A multilayer laminin γ2 DNA coating was fabricated on titanium using a layer-by-layer assembly technique. The rate of coating degradation was evaluated by detecting the amount of cDNA remaining. Surface analysis using X-ray photoelectron spectroscopy, atomic force microscopy, and surface contact angle measurements revealed the multilayer structure to consist of cationic lipid and confirmed that a laminin γ2 DNA layer could be fabricated on titanium via the layer-by-layer assembly process. The transfection efficiency was highest for five layers in the multilayer structure. HEK293 cells cultured on the multilayer films displayed significantly higher adhesion activity than the control group. The expression of laminin γ2 and the co-localization of integrin β4 and plectin were more obvious in HN4 cells cultured on the multilayer laminin γ2 DNA coating, while weak immunoreactivities were observed in the control group. We concluded that the DNA-loaded multilayer provided a surface with good biocompatibility and that the multilayer laminin γ2 DNA coating might be effective in improving cell adhesion and the formation of hemidesmosomes on titanium surfaces.

In vitro three-dimensional coculturing poly3-hydroxybutyrate-co-3-hydroxyhexanoate with mouse-induced pluripotent stem cells for myocardial patch application

Identifying a suitable polymeric biomaterial for myocardial patch repair following myocardial infarction, cerebral infarction, and cartilage injury is essential. This study aimed to investigate the effect of the novel polymer material, poly3-hydroxybutyrate- co-3-hydroxyhexanoate, on the adhesion, proliferation, and differentiation of mouse-induced pluripotent stem cells in vitro. Mouse-induced pluripotent stem cells were isolated, expanded, and cultured on either two-dimensional or three-dimensional poly3-hydroxybutyrate- co-3-hydroxyhexanoate films (membranes were perforated to imitate three-dimensional space). Following attachment onto the films, mouse-induced pluripotent stem cell morphology was visualized using scanning electron microscopy. Cell vitality was detected using the Cell Counting Kit-8 assay and cell proliferation was observed using fluorescent 4',6-diamidino-2-phenylindole (DAPI) staining. Mouse-induced pluripotent stem cells were induced into cardiomyocytes by differentiation medium containing vitamin C. A control group in the absence of an inducer was included. Mouse-induced pluripotent stem cell survival and differentiation were observed using immunofluorescence and flow cytometry, respectively. Mouse-induced pluripotent stem cells growth, proliferation, and differentiation were observed on both two-dimensional and three-dimensional poly3-hydroxybutyrate- co-3-hydroxyhexanoate films. Vitamin C markedly improved the efficiency of mouse-induced pluripotent stem cells differentiation into cardiomyocytes on poly3-hydroxybutyrate- co-3-hydroxyhexanoate films. Three-dimensional culture was better at promoting mouse-induced pluripotent stem cell proliferation and differentiation compared with two-dimensional culture.

Biomimetic thermoplastic polyurethane porous membrane with hierarchical structure accelerates wound healing by enhancing granulation tissue formation and angiogenesis

Wound dressing with hierarchical structure enhances wound healing.

Smart polyhydroxyalkanoate nanobeads by protein based functionalization

The development of innovative medicines and personalized biomedical approaches calls for new generation easily tunable biomaterials that can be manufactured applying straightforward and low-priced technologies. Production of functionalized bacterial polyhydroxyalkanoate (PHA) nanobeads by harnessing their natural carbon-storage granule production system is a thrilling recent development. This branch of nanobiotechnology employs proteins intrinsically binding the PHA granules as tags to immobilize recombinant proteins of interest and design functional nanocarriers for wide range of applications. Additionally, the implementation of new methodological platforms regarding production of endotoxin free PHA nanobeads using Gram-positive bacteria opened new avenues for biomedical applications. This prompts serious considerations of possible exploitation of bacterial cell factories as alternatives to traditional chemical synthesis and sources of novel bioproducts that could dramatically expand possible applications of biopolymers.

From the Clinical Editor

In the 21st century, we are coming into the age of personalized medicine. There is a growing use of biomaterials in the clinical setting. In this review article, the authors describe the use of natural polyhydroxyalkanoate (PHA) nanoparticulates, which are formed within bacterial cells and can be easily functionalized. The potential uses would include high-affinity bioseparation, enzyme immobilization, protein delivery, diagnostics etc. The challenges of this approach remain the possible toxicity from endotoxin and the high cost of production.

Cell patterning on polylactic acid through surface-tethered oligonucleotides

Polylactic acid (PLA) is a candidate material to prepare scaffolds for 3-D tissue regeneration. However, cells do not adhere or proliferate well on the surface of PLA because it is hydrophobic. We report a simple and rapid method for inducing cell adhesion to PLA through DNA hybridization. Single-stranded DNA (ssDNA) conjugated to poly(ethylene glycol) (PEG) and to a terminal phospholipid (ssDNA-PEG-lipid) was used for cell surface modification. Through DNA hybridization, modified cells were able to attach to PLA surfaces modified with complementary sequence (ssDNA'). Different cell types can be attached to PLA fibers and films in a spatially controlled manner by using ssDNAs with different sequences. In addition, they proliferate well in a culture medium supplemented with fetal bovine serum. The coexisting modes of cell adhesion through DNA hybridization and natural cytoskeletal adhesion machinery revealed no serious effects on cell growth. The combination of a 3-D scaffold made of PLA and cell immobilization on the PLA scaffold through DNA hybridization will be useful for the preparation of 3-D tissue and organs.

Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds coated with PhaP-RGD fusion protein promotes the proliferation and chondrogenic differentiation of human umbilical cord mesenchymal stem cells in vitro

Human umbilical cord blood-derived mesenchymal stem cells (hUC-MSCs) have been widely used in tissue engineering. The aim of this study is to evaluate the ability of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) scaffolds coated with polyhydroxyalkanoate binding protein fused with arginyl-glycyl-aspartic acid (PhaP-RGD) to promote the proliferation and chondrogenic differentiation of hUC-MSCs seeded on them. The PhaP-RGD fusion protein was expressed by Escherichia coli. PHBHHx films were coated with PhaP-RGD fusion protein and the physiochemical properties were examined. hUC-MSCs were seeded on PHBHHx films with or without PhaP-RGD precoating and tested for changes in morphology, viability, and chondrogenic differentiation. We found that PhaP-RGD-coated PHBHHx films had similar surface morphology to uncoated PHBHHx. The water contact angle of the coated PHBHHx surface was lower than that of the uncoated surface (10.63° vs. 98.69°). At 7 and 14 days after seeding, the PhaP-RGD-coated PHBHHx group showed greater numbers of viable cells compared to the uncoated PHBHHx group. The expression levels of aggrecan and collagen II were enhanced in the PhaP-RGD-coated PHBHHx group relative to the uncoated PHBHHx group. Histological analysis using toluidine blue staining showed elevated formation of proteoglycan producing chondrocytes in the PhaP-RGD-coated PHBHHx group. Additionally, the synthesis of proteoglycan and collagen was significantly enhanced within the PhaP-RGD constructs. Taken together, PhaP-RGD coating promotes the proliferation and chondrogenic differentiation of hUC-MSCs seeded on PHBHHx films. PhaP-RGD-coated PHBHHx may be a useful scaffold for cartilage tissue engineering.

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-based scaffolds for tissue engineering

Development and selection of an ideal scaffold is of importance for tissue engineering. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) is a biocompatible bioresorbable copolymer that belongs to the polyhydroxyalkanoate family. Because of its good biocompatibility, PHBHHx has been widely used as a cell scaffold for tissue engineering. This review focuses on the utilization of PHBHHx-based scaffolds in tissue engineering. Advances in the preparation, modification, and application of PHBHHx scaffolds are discussed.

Evaluation of PHBHHx and PHBV/PLA fibers used as medical sutures

Two types of fibers were prepared by using bio-based materials: a mono-filament made from poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and a multi-filament made from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactic acid (PLA) blend. The two fibers were evaluated for mechanical properties, biocompatibility and degradability for the potential application as medical sutures. The PHBHHx fiber showed remarkable biocompatibility by H.E. Stainning, with very little impact to the surrounding tissues. The degradation of the fiber was observed by SEM after implantation for 36 weeks, and the major degradation product was detected after 96 weeks. Consistently, the PHBHHx fiber maintained more than half of the mechanical properties after 96 weeks. The other fiber was prepared by twisting PHBV/PLA blend strands to a bunch, and showed high biocompatibility and relatively high degradability. The bunched structure loosed after 36 weeks of implantation. These low-cost and easily prepared fibers have great potential in medical applications, since they could avoid the formation of fibrous capsule, reduce the size of scar, and degrade into non-toxic and even beneficial products.

Graphene oxide doped conducting polymer nanocomposite film for electrode-tissue interface

One of the most significant components for implantable bioelectronic devices is the interface between the microelectrodes and the tissue or cells for disease diagnosis or treatment. To make the devices work efficiently and safely in vivo, the electrode-tissue interface should not only be confined in micro scale, but also possesses excellent electrochemical characteristic, stability and biocompatibility. Considering the enhancement of many composite materials by combining graphene oxide (GO) for its multiple advantages, we dope graphene oxide into poly(3,4-ethylenedioxythiophene) (PEDOT) forming a composite film by electrochemical deposition for electrode site modification. As a consequence, not only the enlargement of efficient surface area, but also the development of impedance, charge storage capacity and charge injection limit contribute to the excellent electrochemical performance. Furthermore, the stability and biocompatibility are confirmed by numerously repeated usage test and cell proliferation and attachment examination, respectively. As electrode-tissue interface, this biomaterial opens a new gate for tissue engineering and implantable electrophysiological devices.

Recombinant spider silk with cell binding motifs for specific adherence of cells

Silk matrices have previously been shown to possess general properties governing cell viability. However, many cell types also require specific adhesion sites for successful in vitro culture. Herein, we have shown that cell binding motifs can be genetically fused to a partial spider silk protein, 4RepCT, without affecting its ability to self-assemble into stable matrices directly in a physiological-like buffer. The incorporated motifs were exposed in the formed matrices, and available for binding of integrins. Four different human primary cell types; fibroblasts, keratinocytes, endothelial cells and Schwann cells, were applied to the matrices and investigated under serum-free culture conditions. Silk matrices with cell binding motifs, especially RGD, were shown to promote early adherence of cells, which formed stress fibers and distinct focal adhesion points. Schwann cells acquired most spread-out morphology on silk matrices with IKVAV, where significantly more viable cells were found, also when compared to wells coated with laminin. This strategy is thus suitable for development of matrices that allow screening of various cell binding motifs and their effect on different cell types.

Enhanced proliferation and differentiation of neural stem cells grown on PHA films coated with recombinant fusion proteins

Polyhydroxyalkanoates (PHAs) belong to a family of copolyesters with demonstrated biocompatibility. We hypothesize that genetically fusing evolutionarily preserved cell binding motifs, such as RGD or IKVAV, to the PHA-binding protein phasin (PhaP) for surface functionalization of PHA materials could better support the growth and differentiation of neural stem cells (NSCs). This hypothesis is tested on three polyester materials of the same aliphatic family: poly(L-lactic acid) (PLA) and two PHB copolymers, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) (PHBVHHx). Experimental results indicate that surface coating of the two fusion proteins, PhaP-RGD and PhaP-IKVAV, provides short-term advantages in promoting the adhesion, proliferation and neural differentiation of rat NSCs compared to the PhaP-coated or uncoated material. Among the tested samples, the combination of coating PhaP-IKVAV on an PHBVHHx surface yields the highest levels in cell adhesion and proliferation, while the PLA film coated with PhaP-IKVAV promotes better neural differentiation and neurite outgrowth in the early stage. Because both PhaP-RGD and PhaP-IKVAV could be produced in an inexpensive manner, our data suggest that PhaP-IKVAV is an ideal nonspecific coating agent to functionalize hydrophobic biomaterials in the application of neural tissue engineering.

Polymer films with surfaces unmodified and modified by non-thermal plasma as new substrates for cell adhesion

The surface properties of biomaterials, such as wettability, polar group distribution, and topography, play important roles in the behavior of cell adhesion and proliferation. Gaseous plasma discharges are among the most common means to modify the surface of a polymer without affecting its properties. Herein, we describe the surface modification of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) films using atmospheric pressure plasma processing through exposure to a dielectric barrier discharge (DBD). After treatment the film surface showed significant changes from hydrophobic to hydrophilic as the water contact angle decreasing from 95° to 37°. All plasma-treated films developed more hydrophilic surfaces compared to untreated films, although the reasons for the change in the surface properties of PS and PMMA differed, that is, the PS showed chemical changes and in the case of PMMA they were topographical. Excellent adhesion and cell proliferation were observed in all films. In vitro studies employing flow cytometry showed that the proliferation of L929 cells was higher in the film formed by a 1:1 mixture of PS/PMMA, which is consistent with the results of a previous study. These findings suggest better adhesion of L929 onto the 1:1 PS/PMMA modified film, indicating that this system is a new candidate biomaterial for tissue engineering.

The use of layer by layer self-assembled coatings of hyaluronic acid and cationized gelatin to improve the biocompatibility of poly(ethylene terephthalate) artificial ligaments for reconstruction of the anterior cruciate ligament

In this study layer by layer (LBL) self-assembled coatings of hyaluronic acid (HA) and cationized gelatin (CG) were used to modify polyethylene terephthalate (PET) artificial ligament grafts. Changes in the surface properties were characterized by scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and contact angle and biomechanical measurements. The cell compatibility of this HA-CG coating was investigated in vitro on PET films seeded with human foreskin dermal fibroblasts over 7days. The results of our in vitro studies demonstrated that the HA-CG coating significantly enhanced cell adhesion, facilitated cell growth, and suppressed the expression of inflammation-related genes relative to a pure PET graft. Furthermore, rabbit and porcine anterior cruciate ligament reconstruction models were used to evaluate the effect of this LBL coating in vivo. The animal experiment results proved that this LBL coating significantly inhibited inflammatory cell infiltration and promoted new ligament tissue regeneration among the graft fibers. In addition, the formation of type I collagen in the HA-CG coating group was much higher than in the control group. Based on these results we conclude that PET grafts coated with HA-CG have considerable potential as substitutes for ligament reconstruction.

The recombinant human dentin matrix protein 1-coated titanium and its effect on the attachment, proliferation and ALP activity of MG63 cells

The aim of the present work was to design a bio-interactive implant surface by coating recombinant human dentin matrix protein 1 (hDMP1) onto titanium and to investigate the biological function of this material. Firstly, the plasmid containing the hDMP1 cDNA was constructed and hDMP1 was expressed, purified and characterized. Then, hDMP1 was coated onto the surface of Ti substrates via a biochemical technique and the procedure was divided into three steps: in the beginning, titanium was treated by regular polishing and denoted as Cp-Ti; then, Cp-Ti received alkaline and water treatment and was nominated as AW-Ti; finally, AW-Ti was coated with hDMP1 and referred to as hDMP1-Ti. The inserts of hDMP1 genes were detected by enzyme digestion as well as gel electrophoresis, and the complete nucleotide sequence of hDMP1 was tested. The purified recombinant hDMP1 was electrophoresed on a 10 % SDS-PAGE gel. Cp-Ti, AW-Ti and hDMP1-Ti were characterized by X-ray photoelectron spectroscope and water contact angles tests. The biological activity of MG63 cells cultured in the three groups was investigated by the cell attachment, proliferation and alkaline phosphatase activity assays. The results show that hDMP1 was successfully constructed and coated onto the titanium surface, and hDMP1-Ti had higher hydrophilicity than Cp-Ti. Compared with Cp-Ti and AW-Ti, hDMP1-Ti showed better in vitro bioactivity.

Biocompatibility of Polyhydroxyalkanoates Synthesized by Bacillus cereus BMH

Polyhydroxyalkanoates (PHAs) are biological polyesters synthesized by many bacteria. The polyesters became the focus of research because of their biodegradability, biocompatibility and the similar physical and chemical properties to those of petroleum derived plastics. A gram-positive strain was isolated from domesticated activated sludge and identified as Bacillus cereus BMH. B. cereus BMH can synthesize PHAs using a wide range of carbon sources. After 36h cultivation in shaken flasks, cell dry-weight was 5.31g/l, PHAs content was 61.2% of cell dry weight which is higher than some other B. cereus reported. The PHAs films showed irregular porous structure under scanning electron microscopy. Biocompatibility of the polyester was evaluated in detail in this article. The polymer was proved of good biocompatibility through Scanning Electron Microscopy (SEM), Fluorescence microscopy observation and CCK-8 assay. It was indicated that the biological polymer had desirable material properties as tissue engineering biomaterials

An in situ forming collagen-PEG hydrogel for tissue regeneration

There are limited options for surgeons to repair simple or complex tissue defects due to injury, illness or disease. Consequently, there are few treatments for many serious ailments, including neural-related injuries, myocardial infarction and focal hyaline cartilage defects. Tissue-engineered scaffolds offer great promise for addressing these wide-ranging indications; however, there are many considerations that need to be made when conceptualizing a product. For many applications, an in situ forming scaffold that could completely fill defects with complex geometries, adhere to adjacent tissues and foster cell proliferation would be ideal. Additionally, the scaffold would preferably have tailored mechanical properties similar to native tissues and highly controllable gelation kinetics, and would not require an external trigger, such as ultraviolet light, for gelation. We have developed a unique injectable hydrogel system composed of collagen and multi-armed poly(ethylene glycol) (PEG) that meets all of these criteria. The collagen component enables cellular adhesion and permits enzymatic degradation, while the multi-armed PEG component has amine-reactive chemistry that also binds proteins/tissue and is hydrolytically degradable. We have characterized the mechanical properties, swelling, degradation rates and cytocompatibility of these novel hydrogels. The hydrogels demonstrated tunable mechanics, variable swelling and suitable degradation profiles. Cells adhered and proliferated to near confluence on the hydrogels over 7 days. These data suggest that these collagen and PEG hydrogels exhibit the mechanical, physical and biological properties suitable for use as an injectable tissue scaffold for the treatment of a variety of simple and complex tissue defects.