The modulation of platelet adhesion and activation by chitosan through plasma and extracellular matrix proteins

Nanofibrous composite from chitosan-casein polyelectrolyte complex for rapid hemostasis in rat models in vivo

Bleeding causes ∼5.8 million deaths globally; half of the patients die if rapid hemostasis is not achieved. Here, we report a chitosan-casein (CC)-based nanofibrous polyelectrolyte complex (PEC) that could clot blood within 10 s in the rat femoral artery model in vivo. The nanofiber formation by self-assembly was also optimized for process parameters (concentration, mixing ratio, pH, and ultrasonication). Results showed that increasing the concentration of chitosan from 10 % to 90 % in the formulation increased the productivity (r = 0.99) of PECs but led to increased blood clotting time (r = 0.90) due to an increase in zeta potential (r = 0.98), fiber diameter (r = 0.93), and decreased surface porosity (r = -0.99), absorption capacity (r = -0.99). The pH also influenced the zeta potential of PEC, with an optimized pH of 8.0 ± 0.1 yielding clear nanofibers. Sonication improved the segregation of nanofibers by promoting water removal. The optimized PECs containing chitosan and casein in the ratio of 30:70 (CC30) at a pH of 8.0 and dehydration under sonication could clot the blood within 9 ± 2 s in vitro and 9 ± 2 s in rat femoral artery puncture model. The CC30 formulation did not cause any irritation or corrosion on rat skin. Histopathology and immunohistochemistry of various organs showed that CC30 was biocompatible and non-immunogenic under in vivo conditions.

Exploring the potential of jujube seed powder in polysaccharide based functional film: Characterization, properties and application in fruit preservation

In this study, we fabricated a novel biodegradable functional film using natural polysaccharides by adding jujube seed powder as an active ingredient. Scanning electron microscopy analysis showed agglomerate formation in the film with increasing concentration of seed powder. Fourier transform-infrared spectroscopy study demonstrated an electrostatic interaction between pectin and chitosan. The water solubility and swelling degree significantly decreased from 55.5 to 47.7 % and 66.0 to 41.9 %, respectively, depicting the film's water resistance properties. Higher opacity and lower transmittance value of the film indicated its protective effect towards light-induced oxidation of food. It was observed that the fabricated active film biodegraded to 82.33 % in 6 days. The DPPH radical scavenging activity of 98.02 % was observed for the functional film. The film showed antifungal activity against B. cinerea and P. chrysogenum. The highest zone of inhibition was obtained against food spoiling bacteria B. subtilis followed by S. aureus, P. aeruginosa and E. coli. Genotoxicity studies with the fabricated film showed a mitotic index of 8 % compared to 3 % in the control film. We used the fabricated film to preserve grapefruits, and the result showed that it could preserve grapes for ten days with an increase in antioxidant activity and polyphenolic content.

Recent advances of chitosan as a hemostatic material: Hemostatic mechanism, material design and prospective application

Uncontrolled hemorrhage arising from surgery or trauma may cause morbidity and even mortality. Therefore, facilitating control of severe bleeding is imperative for health care worldwide. Among diverse hemostatic materials, chitosan (CS) is becoming the most promising material owing to its non-toxic feature, as well as inherently hemostatic performance. However, further enhancing hemostatic property of CS-based materials without compromising more beneficial functions remains a challenge. In this review, representative hemostatic mechanisms of CS-based materials are firstly discussed in detail, mostly including red blood cells (RBCs) aggregation, platelet adherence and aggregation, as well as interaction with plasma proteins. Also, various forms (involving powder/particle, sponge, hydrogel, nanofiber, and other forms) of CS-based hemostatic materials are systematically summarized, mainly focusing on their design and preparation, characteristics, and comparative analysis of various forms. In addition, varied hemostatic applications are described in detail, such as skin wound hemostasis, liver hemostasis, artery hemostasis, and heart hemostasis. Finally, current challenges and future directions of functional design of CS-based hemostatic materials in diverse hemostatic applications are proposed to inspire more intensive researches.

Facilitation of Cell Cycle and Cellular Migration of Rat Schwann Cells by O-Carboxymethyl Chitosan to Support Peripheral Nerve Regeneration

O-carboxymethyl chitosan (CM-chitosan), holds high potential as a valuable biomaterial for nerve guidance conduits (NGCs). However, the lack of explicit bioactivity on neurocytes and poor duration that does not match nerve repair limit the restorative effects. Herein, CM-chitosan-based NGC is designed to induce the reconstruction of damaged peripheral nerves without addition of other activation factors. CM-chitosan possesses excellent performance in vitro for nerve tissue engineering, such as increasing the organization of filamentous actin and the expression of phospho-Akt, and facilitating the cell cycle and migration of Schwann cells. Moreover, CM-chitosan exhibits increased longevity upon cross-linking (C-CM-chitosan) with 1, 4-Butanediol diglycidyl ether, and C-CM-chitosan fibers possess appropriate biocompatibility. In order to imitate the structure of peripheral nerves, multichannel bioactive NGCs are prepared from lumen fillers of oriented C-CM-chitosan fibers and outer warp-knitted chitosan pipeline. Implantation of the C-CM-chitosan NGCs to rats with 10-mm defects of peripheral nerves effectively improve nerve function reconstruction by increasing the sciatic functional index, decreasing the latent periods of heat tingling, enhancing the gastrocnemius muscle, and promoting nerve axon recovery, showing regenerative efficacy similar to that of autograft. The results lay a theoretical foundation for improving the potential high-value applications of CM-chitosan-based bioactive materials in nerve tissue engineering.

Antibacterial Activity and Biocompatibility of Ag-Montmorillonite/Chitosan Colloidal Dressing in a Skin Infection Rat Model: An In Vitro and In Vivo Study

(1) Background: Traditional dressings can only superficially cover the wound, they have widespread issues with inadequate bacterial isolation and liquid absorption, and it is simple to inflict secondary wound injury when changing dressings. Therefore, it is crucial for wound healing to develop a new kind of antimicrobial colloidal dressing with good antibacterial, hygroscopic, and biocompatible qualities. (2) Methods: Ag-montmorillonite/chitosan (Ag-MMT/CS) colloid, a new type of antibacterial material, was prepared from two eco-friendly materials-namely, montmorillonite and chitosan-as auxiliary materials, wherein these materials were mixed with the natural metal Ag, which is an antibacterial agent. The optimum preparation technology was explored, and Ag-MMT/CS was characterized. Next, Staphylococcus aureus, which is a common skin infection bacterium, was considered as the experimental strain, and the in vitro antibacterial activity and cytocompatibility of the Ag-MMT/CS colloid were investigated through various experiments. Subsequently, a rat skin infection model was established to explore the in vivo antibacterial effect. (3) Results: In vitro studies revealed that the Ag-MMT/CS colloid had a good antibacterial effect on S. aureus, with an inhibition zone diameter of 18 mm and an antibacterial rate of 99.18%. After co-culture with cells for 24 h and 72 h, the cell survival rates were 88% and 94%, respectively. The cells showed normal growth and proliferation, and no evident dead cells were observed under the laser confocal microscope. After applying the colloid to the rat skin infection model, the Ag-MMT/CS treatment group exhibited faster wound healing and better local exudation and absorption in the wound than the control group, suggesting that the Ag-MMT/CS colloid exhibited a better antibacterial effect on the S. aureus. (4) Conclusions: Ag+, chitosan, and MMT present in the Ag-MMT/CS colloid dressing exert synergistic effects, and it has good antibacterial effects, cytocompatibility, and hygroscopicity, indicating that this colloid has the potential to become a next-generation clinical antibacterial dressing.

Effect of natural polymer materials on skin healing based on internal wound microenvironment: a review

The concept of wound microenvironment has been discussed for a long time. However, the mechanism of the internal microenvironment is relatively little studied. Here, we present a systematic discussion on the mechanism of natural polymer materials such as chitosan, cellulose, collagen and hyaluronic acid through their effects on the internal wound microenvironment and regulation of wound healing, in order to more comprehensively explain the concept of wound microenvironment and provide a reference for further innovative clinical for the preparation and application of wound healing agents.

Catechol-chitosan/carboxymethylated cotton-based Janus hemostatic patch for rapid hemostasis in coagulopathy

Uncontrolled bleeding is the leading cause of death, and the death risk of bleeding from coagulopathy is even higher. By infusing the relevant coagulation factors, bleeding in patients with coagulopathy can be clinically treated. However, there are not many emergency hemostatic products accessible for coagulopathy patients. In response, a Janus hemostatic patch (PCMC/CCS) with a two-layer structure of partly carboxymethylated cotton (PCMC) and catechol-grafted chitosan (CCS) was developed. Ultra-high blood absorption (4000 %) and excellent tissue adhesion (60 kPa) were both displayed by PCMC/CCS. The proteomic analysis revealed that PCMC/CCS has significantly contributed to the creative generation of FV, FIX, and FX, as well as to the substantial enrichment of FVII and FXIII, re-paving the initially blocked coagulation pathway of coagulopathy to promote hemostasis. The in vivo bleeding model of coagulopathy demonstrated that PCMC/CCS was substantially more effective than gauze and commercial gelatin sponge at achieving hemostasis in just 1 min. The study provides one of the first investigations on procoagulant mechanisms in anticoagulant blood conditions. Rapid hemostasis in coagulopathy will be significantly affected by the results of this experiment.

A Commercial Nonbinding Surface Effectively Reduces Fibrinogen Adsorption but Does Not Prevent Platelet Adhesion to Fibrinogen

A commercial nonbinding surface effectively prevents protein adsorption; however, the platelet phenotype on this surface has yet to be defined. This study evaluates platelet adhesion and adsorption of several plasma/extracellular matrix (ECM) proteins to the nonbinding surface compared to other commonly used nontreated and high-binding surfaces. Platelet adhesion to uncoated microplates and those coated with fibrinogen or collagen is quantified by colorimetric assay. The binding capacity of the examined surfaces for plasma/ECM proteins is evaluated by measuring the relative and absolute protein adsorption. Compared to other surfaces, the nonbinding surface effectively prevents platelet adsorption, i.e. by 61-93% (Enzyme-Linked Immunosorbent Assay, ELISA), and reduces platelet adhesion, i.e. by 92%, when not coated with any protein. The nonbinding surface also decreases platelet deposition on collagen (up to 31%), but not fibrinogen. The nonbinding surface seems to be more of a low-fouling than nonfouling material, as it is able to reduce fibrinogen adsorption but not prevent platelet adhesion to fibrinogen. This feature should be considered when using the nonbinding surface for in vitro platelet testing.

Chitosan-based hydrogel wound dressing: From mechanism to applications, a review

As promising biomaterials, hydrogels are widely used in the medical engineering field, especially in wound repairing. Compared with traditional wound dressings, such as gauze and bandage, hydrogel could absorb and retain more water without dissolving or losing its three-dimensional structure, thus avoiding secondary injury and promoting wound healing. Chitosan and its derivatives have become hot research topics for hydrogel wound dressing production due to their unique molecular structure and diverse biological activities. In this review, the mechanism of wound healing was introduced systematically. The mechanism of action of chitosan in the first three stages of wound repair (hemostasis, antimicrobial properties and progranulation), the effect of chitosan deacetylation and the molecular weight on its performance are analyzed. Additionally, the recent progress in intelligent and drug-loaded chitosan-based hydrogels and the features and advantages of chitosan were discussed. Finally, the challenges and prospects for the future development of chitosan-based hydrogels were discussed.

Natural TEMPO oxidized cellulose nano fiber/alginate/dSECM hybrid aerogel with improved wound healing and hemostatic ability

Natural biopolymers have attracted considerable attention in a variety of biomedical applications. Herein, tempo-oxidized-cellulose nanofibers (T) were incorporated into sodium alginate/chitosan (A/C) to reinforce the physicochemical properties and further modified with decellularized skin extracellular matrix (E). A unique ACTE aerogel was successfully prepared, and its nontoxic behavior was validated using mouse fibroblast L929 cells. In vitro hemolysis results revealed excellent platelet adhesion and fibrin network formation abilities of the obtained aerogel. A high speed of homeostasis was attained based on the quick clotting in <60 s. Skin regeneration in vivo experiments were conducted using the ACT1E0 and ACT1E10 groups. In comparison to ACT1E0 samples, ACT1E10 samples demonstrated enhanced skin wound healing with increased neo-epithelialization, increased collagen deposition, and extracellular matrix remodeling. ACT1E10 was found to be a promising aerogel for skin defect regeneration due to its improved wound-healing ability.

Decellularized liver extracellular matrix and thrombin loaded biodegradable TOCN/Chitosan nanocomposite for hemostasis and wound healing in rat liver hemorrhage model

During deep noncompressible wound management, surgery, transplantation or post-surgical hemorrhage, rapid blood absorption and hemostasis are the key factors to be taken into consideration to reduce unexpected deaths from severe trauma. In this study, a novel hemostatic biodegradable nanocomposite was fabricated where decellularized liver extracellular matrix (L-ECM) was loaded with two natural polymers (oxidized cellulose and chitosan) in association with thrombin. Plant-derived oxidized cellulose nanofiber (TOCN) and Chitosan (CS) from deacylated chitin were self-assembled with each other by electrostatic interactions. ECM was prepared by the whole tissue decellularization process and incorporated into the composite as a source of collagen and other integrated growth factors to promote wound healing. Thrombin was also anchored with the polymers by freeze drying for enhanced hemostatic efficiency of the composite. This study is the first of its kind to report non-solubilized L-ECM and thrombin loaded TOCN and CS composite, CN/CS/EM-Th for faster hemostasis effect in a rat tail amputation (~71 s) and liver avulsion model (~41 s). Furthermore, excellent liver wound regeneration efficacy was observed in-vivo in comparison to the commercially available oxidized regenerated cellulose product SURGICEL gauge.

Recent advances in biopolymer-based hemostatic materials

Hemorrhage is the leading cause of trauma-related deaths, in hospital and pre-hospital settings. Hemostasis is a complex mechanism that involves a cascade of clotting factors and proteins that result in the formation of a strong clot. In certain surgical and emergency situations, hemostatic agents are needed to achieve faster blood coagulation to prevent the patient from experiencing a severe hemorrhagic shock. Therefore, it is critical to consider appropriate materials and designs for hemostatic agents. Many materials have been fabricated as hemostatic agents, including synthetic and naturally derived polymers. However, compared to synthetic polymers, natural polymers or biopolymers, which include polysaccharides and polypeptides, have greater biocompatibility, biodegradability, and processibility. Thus, in this review, we focus on biopolymer-based hemostatic agents of different forms, such as powder, particles, sponges, and hydrogels. Finally, we discuss biopolymer-based hemostats currently in clinical trials and offer insight into next-generation hemostats for clinical translation.

Optimization of Oligomer Chitosan/Polyvinylpyrrolidone Coating for Enhancing Antibacterial, Hemostatic Effects and Biocompatibility of Nanofibrous Wound Dressing

A synergistic multilayer membrane design is necessary to satisfy a multitude of requirements of an ideal wound dressing. In this study, trilayer dressings with asymmetric wettability, composed of electrospun polycaprolactone (PCL) base membranes coated with oligomer chitosan (COS) in various concentrations of polyvinylpyrrolidone (PVP), are fabricated for wound dressing application. The membranes are expected to synergize the hygroscopic, antibacterial, hemostatic, and biocompatible properties of PCL and COS. The wound dressing was coated by spraying the solution of 3% COS and 6% PVP on the PCL base membrane (PVP6–3) three times, which shows good interaction with biological subjects, including bacterial strains and blood components. PVP6–3 samples confirm the diameter of inhibition zones of 20.0 ± 2.5 and 17.9 ± 2.5 mm against Pseudomonas aeruginosa and Staphylococcus aureus, respectively. The membrane induces hemostasis with a blood clotting index of 74% after 5 min of contact. In the mice model, wounds treated with PVP6–3 closed 95% of the area after 10 days. Histological study determines the progression of skin regeneration with the construction of granulation tissue, new vascular systems, and hair follicles. Furthermore, the newly-growth skin shares structural resemblances to that of native tissue. This study suggests a simple approach to a multi-purpose wound dressing for clinical treatment.

Injectable shape memory hydroxyethyl cellulose/soy protein isolate based composite sponge with antibacterial property for rapid noncompressible hemorrhage and prevention of wound infection

Uncontrollable hemorrhage and subsequent wound infection are severe threats to life, especially for the deep noncompressible massive bleeding. However, traditional hemostatic materials are ineffective for extreme bleeding and subsequent wound infection. Here, we prepared an injectable shape memory hydroxyethyl cellulose/soy protein isolate based composite sponge (EHSS) for rapid noncompressible hemorrhage and prevention of wound infection. The nano silver (AgNPs)-loaded shape memory sponge (EHP@Ag) was fabricated by mussel-inspired polydopamine coating EHSS sponge, then reducing and immobilizing AgNPs in situ. The EHP@Ag sponges showed rapid blood-triggered shape recovery speed, which is beneficial for administering noncompressible hemorrhage. The results of the hemostatic experiment in vivo demonstrated that EHP@Ag sponge exhibited a desirable hemostasis effect (hemostasis time: 22.75 ± 3.86 s, blood loss: 285.25 ± 24.93 mg) compared to the commercial gelatin sponge (hemostasis time: 49.25 ± 3.30 s, blood loss: 755.50 ± 24.45 mg). Meanwhile, the EHP@Ag sponge has an efficient antibacterial property. Furthermore, the antibacterial experiment in vivo showed that the EHP@Ag sponges could kill bacteria effectively and reduce the bacteria-induced inflammatory response. In summary, the shape memory sponges can quickly control bleeding and avoid bacterial infection, which shows great potential for clinical application as a multifunctional hemostatic agent.

Development of a Hemostatic Urinary Catheter for Transurethral Prostatic Surgical Applications

OBJECTIVE

To investigate a novel transurethral hemostatic catheter device with an integrated chitosan endoluminal hemostatic dressing (CEHD). Development and implementation of this technology may help address bleeding following surgery such as transurethral resection of prostate (TURP). Bleeding remains the most common complication following TURP, leading to increased morbidity and hospitalization.

METHODS

Investigation of hemostasis, delivery, safety and efficacy of the CEHD device is conducted using Female Yorkshire swine (N = 23). Hemostatic efficacy of the CEHD (N = 12) is investigated against a control of gauze (N = 12) in a splenic injury model (3 swine). The delivery, safety, and efficacy of the CEHD device (N = 10) are investigated against Foley-catheter control (N = 10) for 7 days using a swine bladder-neck-injury model.

RESULTS

In the splenic injury study, 9/12 CEHD dressings successfully achieved hemostasis within 150 seconds (mean 83 seconds) vs success of 6/12 (mean 150 seconds) for gauze (P = .04). In the 7-day study, the CEHD was successfully deployed in 10/10 animals and all dressings were tolerated without histologic or clinical adverse effect. Hemostasis of the CEHD device was found to be noninferior to control catheters. Noninferiority is attributed to low bleeding rates in the swine bladder neck injury model.

CONCLUSION

This investigation successfully demonstrated the feasibility of transurethral deployment of the CEHD in vivo. Routine use of safe and slowly dissolvable CEHDs could reduce the rate of complications and hospitalizations associated with bleeding and blood loss in TURP procedures. Further investigation is warranted.

Chitosans and Nanochitosans: Recent Advances in Skin Protection, Regeneration, and Repair

Chitosan displays a dual function, acting as both an active ingredient and/or carrier for pharmaceutical bioactive molecules and metal ions. Its hydroxyl- and amino-reactive groups and acetylation degree can be used to adjust this biopolymer's physicochemical and pharmacological properties in different forms, including scaffolds, nanoparticles, fibers, sponges, films, and hydrogels, among others. In terms of pharmacological purposes, chitosan association with different polymers and the immobilization or entrapment of bioactive agents are effective strategies to achieve desired biological responses. Chitosan biocompatibility, water entrapment within nanofibrils, antioxidant character, and antimicrobial and anti-inflammatory properties, whether enhanced by other active components or not, ensure skin moisturization, as well as protection against bacteria colonization and oxidative imbalance. Chitosan-based nanomaterials can maintain or reconstruct skin architecture through topical or systemic delivery of hydrophilic or hydrophobic pharmaceuticals at controlled rates to treat skin affections, such as acne, inflammatory manifestations, wounds, or even tumorigenesis, by coating chemotherapy drugs. Herein, chitosan obtention, physicochemical characteristics, chemical modifications, and interactions with bioactive agents are presented and discussed. Molecular mechanisms involved in chitosan skin protection and recovery are highlighted by overlapping the events orchestrated by the signaling molecules secreted by different cell types to reconstitute healthy skin tissue structures and components.

Antibacterial porous sponge fabricated with capric acid-grafted chitosan and oxidized dextran as a novel hemostatic dressing

This work aims to fabricate multifunctional hemostatic sponges (C-ODs). Porous C-ODs were first constructed by using capric acid-modified chitosan (CSCA) and oxidized dextrans (ODs) with different oxidation degrees. Batches of experiments showed that (i) CSCA (33.39% of grafting degree), ODs, and C-ODs (100-200 μm in pore size) were synthesized, evidenced by FT-IR, ¹H NMR, elemental analysis, hydroxylamine hydrochloride titration, and SEM results; (ii) among C-ODs, C-OD₂ had appropriate porosity (85.0%), swelling (20 times its dry weight), absorption, water retention, water vapor transmission, and mechanical properties; (iii) C-OD₂ possessed low toxicity (relative cell viability > 86%), low hemolysis rate (0.65%), suitable tissue adhesion (4.74 kPa), and strong antibacterial efficacy (five strains); and (iv) C-OD₂'s dynamic blood clotting was within 30 s. In three animal injury models, C-OD₂'s hemostasis time and blood loss were fairly lower than commercial gelatin sponge. Totally, C-OD₂ might serve as an ideal hemostatic dressing.

Effects and treatment applications of polymeric nanoparticles on improving platelets' storage time: a review of the literature from 2010 to 2020

Maintaining the quality of platelet products and increasing their storage time are priorities for treatment applications. The formation of platelet storage lesions that limit the storage period and preservation temperature, which can prepare a decent environment for bacterial growth, are the most important challenges that researchers are dealing with in platelet preservation. Nanotechnology is an emerging field of science that has introduced novel solutions to resolve these problems. Here, we reviewed the reported effects of polymeric nanoparticles-including chitosan, dendrimers, polyethylene glycol (PEG), and liposome-on platelets in articles from 2010 to 2020. As a result, we concluded that the presence of dendrimer nanoparticles with a smaller size, negative charge, low molecular weight, and low concentration along with PEGylation can increase the stability and survival of platelets during storage. In addition, PEGylation of platelets can also be a promising approach to improve the quality of platelet bags during storage.

Management of recurrent aphthous ulcers exploiting polymer-based Muco-adhesive sponges: in-vitro and in-vivo evaluation

Recurrent aphthous ulcer (RAU) is a well-known painful, inflammatory disease with uncertain etiology for which local symptomatic therapy is only available. The aim of this study was to formulate and characterize muco-adhesive sponges containing a mixture of tenoxicam and miconazole nitrate to manage pain, inflammation and avoid candida infection that may accompany RAU due to poor oral hygiene. Two polymers at different concentrations were used to prepare sponges applying simple freeze-drying. Medicated chitosan (2%) sponges (mC2) showed acceptable physical appearance, surface pH (6.3 ± 0.042), porosity (25.7% ± 1.8), swelling index (5.7 ± 0.11), in-vivo and ex-vivo muco-adhesion time (115 min.±0.813 and 155 min.±1.537, respectively), ex-vivo muco-adhesion force (0.09 N ± 0.002) and scanning electron microscope (SEM) images. For concurrent clear-cut determination of tenoxicam and miconazole nitrate from mC2, a new UPLC method was developed and validated. mC2 sponges exhibited superior in-vitro drug release profiles where ∼100% of tenoxicam released within 5 min for fast pain relief with a more prolonged miconazole nitrate release. Furthermore, in-vivo animal study revealed that mC2 caused a significant decrease in the acetic acid-induced ulcer size in rats after 6 days of treatment (p < .0001) compared to negative and positive controls. Additionally, histopathological examination showed faster healing with complete restoration of the normal oral histology in rats. The present study concludes that chitosan sponge loaded with a combination of tenoxicam and miconazole nitrate could improve healing of RAU cases.

Biomimetic silk biomaterials: Perlecan-functionalized silk fibroin for use in blood-contacting devices

Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain, and compared to physisorbed and carbodiimide immobilized rDV. Untreated and treated silk biomaterials were examined for interactions with blood components with varying degrees of complexity, including isolated platelets, platelet rich plasma, blood plasma, and whole blood, both under agitated and flow conditions. rDV-biofunctionalized silk biomaterials were shown to be blood compatible in terms of platelet and whole blood interactions and the PIII treatment was shown to be an effective and efficient means of covalently immobilizing rDV in its bioactive form. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications. STATEMENT OF SIGNIFICANCE: Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V (rDV) of the human basement membrane proteoglycan perlecan towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications.

Highly Segregated Biocomposite Membrane as a Functionally Graded Template for Periodontal Tissue Regeneration

Guided tissue regeneration (GTR) membranes are used for treating chronic periodontal lesions with the aim of regenerating lost periodontal attachment. Spatially designed functionally graded bioactive membranes with surface core layers have been proposed as the next generation of GTR membranes. Composite formulations of biopolymer and bioceramic have the potential to meet these criteria. Chitosan has emerged as a well-known biopolymer for use in tissue engineering applications due to its properties of degradation, cytotoxicity and antimicrobial nature. Hydroxyapatite is an essential component of the mineral phase of bone. This study developed a GTR membrane with an ideal chitosan to hydroxyapatite ratio with adequate molecular weight. Membranes were fabricated using solvent casting with low and medium molecular weights of chitosan. They were rigorously characterised with scanning electron microscopy, Fourier transform infrared spectroscopy in conjunction with photoacoustic sampling accessory (FTIR-PAS), swelling ratio, degradation profile, mechanical tensile testing and cytotoxicity using human osteosarcoma and mesenchymal progenitor cells. Scanning electron microscopy showed two different features with 70% HA at the bottom surface packed tightly together, with high distinction of CH from HA. FTIR showed distinct chitosan dominance on top and hydroxyapatite on the bottom surface. Membranes with medium molecular weight showed higher swelling and longer degradation profile as compared to low molecular weight. Cytotoxicity results indicated that the low molecular weight membrane with 30% chitosan and 70% hydroxyapatite showed higher viability with time. Results suggest that this highly segregated bilayer membrane shows promising potential to be adapted as a surface layer whilst constructing a functionally graded GTR membrane on its own and for other biomedical applications.

Evaluation of the effects of nanoparticles on the therapeutic function of platelet: a review

OBJECTIVES

Nanotechnology and nanoparticles are used in different applications in disease monitoring and therapy in contact with blood. Nanoparticles showed different effects on blood components and reduced or improved the function of therapeutic platelet during the storage time. This review study was performed to evaluate the impacts of various sizes and charges of nanoparticles on platelet function and storage time. The present review contains the literature between 2010 and 2020. The data have been used from different sites such as PubMed, Wiley, ScienceDirect and online electronic journals.

KEY FINDINGS

From the literature survey, it has been demonstrated that among various properties, size and charge of nanoparticles were critical on the function of therapeutic platelet during the storage and inhibition of their aggregation. Overall, this study described that nanoparticles with smaller size and negative charge were more effective in increasing the survival time, inhibition of aggregation and improving the function of therapeutic platelet.

SUMMARY

Based on the current review, it can be confirmed that nanoparticles such as dendrimer, Au, Ag and iron oxide nanoparticles with smaller size and negative charge have significant advantages for improving the efficacy of platelets during the storage chain and inhibition of their aggregation.

Effect of Recombinant Human Perlecan Domain V Tethering Method on Protein Orientation and Blood Contacting Activity on Polyvinyl Chloride

Surface modification of biomaterials is a promising approach to control biofunctionality while retaining the bulk biomaterial properties. Perlecan is the major proteoglycan in the vascular basement membrane that supports low levels of platelet adhesion but not activation. Thus, perlecan is a promising bioactive for blood-contacting applications. This study furthers the mechanistic understanding of platelet interactions with perlecan by establishing that platelets utilize domains III and V of the core protein for adhesion. Polyvinyl chloride (PVC) is functionalized with recombinant human perlecan domain V (rDV) to explore the effect of the tethering method on proteoglycan orientation and bioactivity. Tethering of rDV to PVC is achieved via either physisorption or covalent attachment via plasma immersion ion implantation (PIII) treatment. Both methods of rDV tethering reduce platelet adhesion and activation compared to the pristine PVC, however, the mechanisms are unique for each tethering method. Physisorption of rDV on PVC orientates the molecule to hinder access to the integrin-binding region, which inhibits platelet adhesion. In contrast, PIII treatment orientates rDV to allow access to the integrin-binding region, which is rendered antiadhesive to platelets via the glycosaminoglycan (GAG) chain. These effects demonstrate the potential of rDV biofunctionalization to modulate platelet interactions for blood contacting applications.

Fast acting hemostatic agent based on self-assembled hybrid nanofibers from chitosan and casein

Hemorrhage is a leading cause of preventable death in both military combat and civilian accidents. To overcome these challenges, an affordable and effective bandage is must required substance. A novel strategy is reported for developing chitosan-casein (CC) based self-assembled nanofibrous polyelectrolyte complex (PEC) for rapid blood clotting. The amide group (1630 cm^-1) and phosphate group (910 cm^-1) of chitosan-casein can form PEC at pH 8.2 ± 0.2. The PECs contain intertwined nanofibers (≤100 nm diameter) with a high surface area. Increasing chitosan percentage from 30% (CC30) to 50% (CC50) or 70% (CC70) results, increase in zeta potential of PEC from -9.14 ± 3.3 to 7.46 ± 3.7 and 14.8 ± 3.3 mV, respectively. Under in vitro conditions, the CC30, CC50, and CC70 PECs allow platelet adhesion and rapidly absorbs blood fluid to form mechanically stable blood clots within 9 ± 3, 16 ± 3, and 30 ± 4 s, respectively, which are better than Celox™ (90 ± 3 s). In vivo application of PEC (CC50) causes clotting within 37 ± 6 s of large (1 cm) arterial incision in rabbit models. The PEC is biocompatible with promising hemostatic efficiency. This is the first report of nanofibrous PEC from chitosan and casein for rapid clotting, to the best of our knowledge.

Recent advances of emerging green chitosan-based biomaterials with potential biomedical applications: A review

Chitosan is the most abundant natural biopolymer, after cellulose. It is mainly derived from the fungi, shrimp's shells, and exoskeleton of crustaceans, through the deacetylation of chitin. The ecological sustainability associated with its exercise and the flexibility of chitosan owing to its active functional hydroxyl and amino groups makes it a promising candidate for a wide range of applications through a variety of modifications. The biodegradability and biocompatibility of chitosan and its derivatives along with their various chemical functionalities make them promising carriers for pharmaceutical, nutritional, medicinal, environmental, agriculture, drug delivery, and biotechnology applications. The present work aims to provide a detailed and organized description of modified chitosan and its derivatives-based nanomaterials for biomedical applications. We addressed the biological and physicochemical benefits of nanocomposite materials made up of chitosan and its derivatives in various formulations, including improved physicochemical stability and cells/tissue interaction, controlled drug release, and increased bioavailability and efficacy in clinical practice. Moreover, several modification techniques and their effective utilization are also reviewed and collected in this review.

Preparation and evaluation of an innovative antibacterial bi-layered composite dressing for skin wound healing

AIM OF THE STUDY

The aim of the current study was to develop collagen-based bi-layered composite dressings with antibacterial property and evaluate the efficiency for wound healing.

MATERIALS AND METHODS

A bi-layered composite wound dressing was fabricated using two marine biomacromolecules (collagen and chitosan or carboxymethyl chitosan). Non-crosslinked and N-Ethyl-N'-(3-dimethylaminopropyl) carbodiimide/N-Hydroxy succinimide (EDC/NHS) cross-linked collagen sponges fabricated by vacuum freeze-drying technology was used as the inner layer. The medical spun-laced nonwoven coated with chitosan and carboxymethyl chitosan was used as the outer layer. The antibacterial activities against E. coli and S. aureus were evaluated by the inhibition zone assay. Deep second-degree scald model was performed to evaluate the efficiency of bi-layered composite dressings for wound healing.

RESULTS

In view of comprehensive evaluation of appearance and in vitro antibacterial activity, medical spun-laced nonwoven coated with 3% of chitosan solution was chosen to be used as the optimized preparation conditions to produce the outer layer of composite dressing, which acted as a barrier against microorganisms and provided mechanical support. Furthermore, the results of wound closure and histopathological analysis indicated that EDC/NHS cross-linked collagen-based bi-layered composite dressing was superior to non-crosslinked and commercial products, which stimulated the wound healing process and accomplished deep second-degree scalded skin healing within a time span of 28 days.

CONCLUSION

The EDC/NHS cross-linked collagen-based bi-layered composite dressing had immense potential to be applied for an ideal wound dressing for more efficient and faster wound healing. Therefore, the findings provided the essential theoretical basis for great potential of collagen-based composite dressing used in wound healing applications.

Synthesis of a novel nanocomposite containing chitosan as a three-dimensional printed wound dressing technique: Emphasis on gene expression

In this study, a highly porous three-dimensional (3D)-printed wound healing core/shell scaffold fabricated using poly-lactic acid (PLA). The core of scaffold was composed of hyaluronic acid (HA), copper carbon dots (Cu-CDs), rosmarinic acid, and chitosan hydrogel. Cu-CDs were synthesized using ammonium hydrogen citrate under hydrothermal conditions. Formulation containing 1 mg ml^-1 concentration of Cu-CDs showed an excellent antibacterial activity against gram bacteria. At 0.25 mg ml^-1 of Cu-CDs concentration, scaffold had a good biocompatibility as confirmed by cytotoxicity assay on L929 fibroblast stem cells. in vivo wound healing experiments on groups of rats revealed that after 15 days of treatment, the optimal formulation of composite scaffold significantly improves the wound healing process compared to the PLA scaffold. This finding was confirmed by histological analysis and the relative expression of PDGF, TGF-β, and MMP-1 genes. The biocompatible antibacterial CU-CDS/PLA/HA/chitosan/rosmarinic acid nanocomposite is a promising wound healing scaffold which highly accelerates the process of skin regeneration.

Chitosan-Based Functional Materials for Skin Wound Repair: Mechanisms and Applications

Skin wounds not only cause physical pain for patients but also are an economic burden for society. It is necessary to seek out an efficient approach to promote skin repair. Hydrogels are considered effective wound dressings. They possess many unique properties like biocompatibility, biodegradability, high water uptake and retention etc., so that they are promising candidate materials for wound healing. Chitosan is a polymeric biomaterial obtained by the deacetylation of chitin. With the properties of easy acquisition, antibacterial and hemostatic activity, and the ability to promote skin regeneration, hydrogel-like functional wound dressings (represented by chitosan and its derivatives) have received extensive attentions for their effectiveness and mechanisms in promoting skin wound repair. In this review, we extensively discussed the mechanisms with which chitosan-based functional materials promote hemostasis, anti-inflammation, proliferation of granulation in wound repair. We also provided the latest information about the applications of such materials in wound treatment. In addition, we summarized the methods to enhance the advantages and maintain the intrinsic nature of chitosan via incorporating other chemical components, active biomolecules and other substances into the hydrogels.

Intermolecular interactions of chitosan: Degree of acetylation and molecular weight

The degree of acetylation (DA), which determines as the molar proportion of N-acetyl-D-glucosamine units on chitosan, characterizes the physical, chemical, and biological properties of chitosan. Thus, DA can be a critical factor in the utilization of chitosan. Nevertheless, quantitative studies on the molecular interactions of chitosan as a function of DA are lacking. Here, we directly measured the molecular interaction (adhesion and cohesion) of molecularly thin chitosan films, dependent on the molecular weight and DA, using a surface forces apparatus. Using low molecular weight (LMW, ∼5 kDa) and high molecular weight (HMW, ∼135 kDa) chitosan, we obtained several DA ranges through a reacetylation method. The interactions of LMW chitosan were greatly influenced by the intrinsic charge of the chitosan units, whereas for HMW chitosan, chain flexibility was found to be the major factor affecting molecular interaction Taken together, our comprehensive data provides a holistic understanding of the interaction mechanism of chitosan.

Injectable Self-Healing Hydrogels Containing CuS Nanoparticles with Abilities of Hemostasis, Antibacterial activity, and Promoting Wound Healing

Injectable self-healing hydrogels containing functional nanoparticles (NPs) have attracted much attention in many fields of biomedicine. A series of injectable self-healing hydrogels containing PEGylation CuS NPs based on N-carboxyethyl chitosan (CEC) and oxidized sodium alginate (OA) were developed by taking advantages of the unique functions of CuS NPs and chitosan, referred to as CuS NP hydrogels or CEC-OA_m-CuS_n, where "m" stands for the concentration percentage of the added OA solution (w/v) and "n" represents the molar concentration of CuS NPs in the hydrogels. The physical properties of CuS NP hydrogels, syringeability, rapid self-repair ability, and photothermal performance were systematically investigated. The multiple functions for CuS NP hydrogels requested in the skin healing process were explored. The results showed that CuS NP hydrogels had not only adjustable physical properties and good injectable self-healing characteristics but also excellent functionalities, concurrently including hemostatic ability, bacteria killing capability, and cell migration and proliferation promotion. In vivo wound healing and histomorphological examinations of immunofluorescence staining in a mouse full-thickness wound model demonstrated good acceleration effects of these hydrogels for infected wound healing. Therefore, these injectable self-healing CuS NP hydrogels which possess the abilities of hemostasis, antibacterial activity, and infected-wound healing promotion exhibit great potential as in situ wound dressings.

A glimpse on the function of chitosan as a dental hemostatic agent

Managing a bleeding patient can be a challenge during dental surgery. Profuse hemorrhage due to platelet defects, coagulation disorders, vascular anomalies, medication-induced patients, as well as inherited bleeding ailments result in soft tissue hematoma, septic shock, compromised airway, and in some severe cases, death could occur. A vast array of surgical hemostatic agents are available to stop bleeding, including chitosan-based hemostatic agents. Chitosan has an advantage over other topical hemostatic materials for its ability to promote shorter bleeding times and assist in healing. Massive behind-the-scene research and development efforts are ongoing to increase the performance of chitosan as a hemostatic agent. Numerous studies on chitosan use in dental hemostasis have registered it as being safe, biodegradable, biocompatible, promoting healing, antimicrobial and bioactive. This article reviews the application of chitosan in managing hemostasis in dental patients.

Active delivery of multi-layer drug-loaded microneedle patches using magnetically driven capsule

In this paper, we propose the active delivery of multi-layer drug-loaded microneedle (MN) patches using a capsule that can be driven by an external magnetic field. Firstly, the multi-layer drug-loaded MN patches consist of three delivered MN patches which are composed of a drug-loaded MN patch and polydimethylsiloxane layer. The drug-loaded MN patch is made of a 10% gelatin solution and a drug. The multi-layer MN patches are attached to a permanent magnet in a magnetically driven capsule. Under an external magnetic field generated by an electromagnetic actuation system, the capsule with the multi-layer MN patches can reach the target lesions, and each MN patch can be delivered to the target lesions for medical treatment. The active delivery of the multi-layer MN patches using the proposed magnetically driven capsule was confirmed via phantom experiments. Accordingly, the adhesion of the three separated faces of the multi-layer MN patches and the adhesion between the porcine small intestine and the MN patch were measured using a load cell. We demonstrate the feasibility of the active delivery of the multi-layer MN patches to the target lesions on a porcine small intestine. Consequently, we expect that the active delivery of the multi-layer drug-loaded MN patches using the magnetically driven capsule presented in this study can be a useful method for drug delivery to lesions at various locations in the gastrointestinal tract.

Considerations in the Development of Small-Diameter Vascular Graft as an Alternative for Bypass and Reconstructive Surgeries: A Review

BACKGROUND

Current design strategies for small diameter vascular grafts (< 6 mm internal diameter; ID) are focused on mimicking native vascular tissue because the commercially available grafts still fail at small diameters, notably due to development of intimal hyperplasia and thrombosis. To overcome these challenges, various design approaches, material selection, and surface modification strategies have been employed to improve the patency of small-diameter grafts.

REVIEW

The purpose of this review is to outline various considerations in the development of small-diameter vascular grafts, including material choice, surface modifications to enhance biocompatibility/endothelialization, and mechanical properties of the graft, that are currently being implanted. Additionally, we have taken into account the general vascular physiology, tissue engineering approaches, and collective achievements of the authors in this area. We reviewed both commercially available synthetic grafts (e-PTFE and PET), elastic polymers such as polyurethane and biodegradable and bioresorbable materials. We included naturally occurring materials by focusing on their potential application in the development of future vascular alternatives.

CONCLUSION

Until now, there are few comprehensive reviews regarding considerations in the design of small-diameter vascular grafts in the literature. Here-in, we have discussed in-depth the various strategies employed to generate engineered vascular graft due to their high demand for vascular surgeries. While some TEVG design strategies have shown greater potential in contrast to autologous or synthetic ePTFE conduits, many are still hindered by high production cost which prevents their widespread adoption. Nonetheless, as tissue engineers continue to develop on their strategies and procedures for improved TEVGs, soon, a reliable engineered graft will be available in the market. Hence, we anticipate a viable TEVG with resorbable property, fabricated via electrospinning approach to hold a greater potential that can overcome the challenges observed in both autologous and allogenic grafts. This is because they can be mechanically tuned, incorporated/surface-functionalized with bioactive molecules and mass-manufactured in a reproducible manner. It is also found that most of the success in engineered vascular graft approaching commercialization is for large vessels rather than small-diameter grafts used as cardiovascular bypass grafts. Consequently, the field of vascular engineering is still available for future innovators that can take up the challenge to create a functional arterial substitute.

Rapid hemostatic chitosan/cellulose composite sponge by alkali/urea method for massive haemorrhage

Here, a simple and efficient strategy to produce porous and hydrophilic chitosan/cellulose sponge using surfactant and pore-forming agent is demonstrated. The preparation of composite sponge by LiOH/KOH/urea solvent system effectively solve the problems of uneven distribution of chitosan, poor softness and acid residue caused by soaking in chitosan acid solution. The obtained chitosan/cellulose sponges exhibit high water absorption capacity and rapid shape recoverability, as well as good mechanical properties. Effective inhibitory on Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa are particularly proved. Besides, the result of the dynamic whole blood clotting time indicated that the chitosan/cellulose composite sponge has better coagulation ability than those of traditional gauze and gelatin sponge. Animal experiment further showed that rapid hemostasis within 34 s can be reached with the composite sponge. Better biocompatibility of the composite sponge is proved by the results of hemocompatibility and cytotoxicity, indicating an excellent candidate for rapid hemostasis in massive haemorrhage.

Use of hemostatic agents for surgical bleeding in laparoscopic partial nephrectomy: Biomaterials perspective

In recent years, there was an abrupt increase in the incidence of renal tumors, which prompt up the appearance of cutting-edge technology, including minimally invasive and organ-preserving approaches, such as laparoscopic partial nephrectomy (LPN). LPN is an innovative technique used to treat small renal masses that have been gaining popularity in the last few decades due to its promissory results. However, the bleeding control remains the main challenge since the majority of currently available hemostatic agents (HAs) used in other surgical specialities are inefficient in LPN. This hurried the search for effective HAs adapted for LPN surgical peculiarities, which resulted on the emergence of different types of topical HAs. The most promising are the natural origin HAs because of their inherent biodegradability, biocompatibility, and lowest toxicity. These properties turn them top interests' candidates as HAs in LPN. In this review, we present a deep overview on the progress achieved in the design of HAs based on natural origin polymers, highlighting their distinguishable characteristics and providing a clear understanding of their hemostat's role in LPN. This way it may be possible to establish a structure-composition properties relation, so that novel HAs for LPN can be designed to explore current unmet medical needs.

Antibacterial and Hemostatic Thiol-Modified Chitosan-Immobilized AgNPs Composite Sponges

Wound bleeding and infection are two of the major threats to patients' lives, but developing safe materials with high hemostasis efficiency and antibacterial activity remains a major challenge. Silver nanoparticles (AgNPs) are suitable as antibacterial agents in the hemostatic process, but the application is hampered because of easy accumulation of toxicity. Herein, thiol-modified chitosan (TMC) was prepared by modifying with mercaptosuccinic acid and then was used to immobilize AgNPs to obtain composite sponges (TMC/AgNPs) for stemming the bleeding and preventing infection. TMC/AgNPs sponges had complex interlaced tubular porous structure with high porosity (99.42%), indicating high absorption. TMC had high immobilization efficiency for AgNPs-the release rate of AgNPs was 14.35% after 14 days-but the TMC/AgNPs sponge still had excellent antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. In vitro and in vivo experiments confirm that the TMC/AgNPs sponge had fast and efficient hemostatic performance in comparison with the PVF sponge, and its possible mechanism was the synergistic effect of high blood absorption capacity and the interaction between amino, sulfydryl, and blood cells. Furthermore, the TMC/AgNPs sponge can promote wound healing by preventing wound infection, while the PVF sponge cannot. More importantly, the sponges had good safety due to the immobilization of TMC for AgNPs.

Efficacy of a chitosan tampon in the loop electrosurgical excision procedure: A prospective randomized controlled study

It has been reported that chitosan has a hemostatic effect and an antibiotic activity. This study aimed to evaluate the efficacy and feasibility of using a chitosan tampon (Hemoblock-Tampon) in preventing hemorrhage and enhancing wound healing after the loop electrosurgical excision procedure (LEEP).This single-blind, prospective, randomized study included 62 consecutive patients who underwent LEEP for cervical intraepithelial neoplasia. A chitosan tampon (31 patients; treatment group), or a general tampon (31 patients; control group) was applied to the uterine cervix immediately after LEEP. One patient in the treatment group declined to participate in this study. Thus, 30 patients in the treatment group and 31 patients in the control group completed this study. For objective analysis of hemorrhage in the postoperative 2 weeks, the amounts of bleeding were checked daily with a pictorial blood assessment chart. We evaluated vaginal discharge, abdominal pain, and impairment in daily living during the postoperative 2 weeks using 5 visual analogue scale questionnaires.The bleeding count was significantly lower in the treatment group than in the control group (21.37 ± 16.86 vs. 40.52 ± 16.55, p = 0.0014). The sum of the scores of the 5 questionnaires was significantly lower in the treatment group than in the control group (6.53 ± 2.84 vs. 8.59 ± 2.88, p = 0.0079). The incidence of vaginal discharge was significantly lower in the treatment group than in the control group (20.0% vs. 48.4%, p = 0.0207). According to logistic regression, only the use of chitosan tampon reduced the risk of moderate to severe vaginal bleeding 2 weeks after surgery (Odd ratio, 0.213; 95% confidence interval, 0.06-0.76; p = 0.0172). Complete healing of the uterine cervix occurred in 86.7% of patients in the treatment group and in 61.3% of patients in the control group at 4 weeks after surgery (p = 0.0255).The use of chitosan tampons can reduce hemorrhage, vaginal discharge, abdominal pain, and impairment of daily living after LEEP. Moreover, chitosan tampon may help enhance wound healing.

Characterization and biological evaluation of a novel silver nanoparticle-loaded collagen-chitosan dressing

Effective coverage and protection is a priority in wound treatment. Collagen and chitosan have been widely used for wound dressings due to their excellent biological activity and biocompatibility. Silver nanoparticles (AgNPs) have a powerful antibacterial effect. In this study, a macromolecular and small-molecular collagen mixed solution, a macromolecular and small-molecular chitosan mixed solution were prepared, and a silver nanoparticle-loaded collagen-chitosan dressing (AgNP-CCD) has been proposed. First, the effects of a collagen-chitosan mixed solution on the proliferation of human umbilical vein endothelial cells and the secretion of cytokines were evaluated. Then, the characteristics and antibacterial effects of the AgNP-CCD were tested, and the effects on wound healing and the influence of wound cytokine expression were investigated via a deep second-degree burn wound model. The results showed that at the proper proportion and concentration, the collagen-chitosan mixed solution effectively promoted cell proliferation and regulated the levels of growth factors (vascular endothelial growth factor [VEGF], epidermal growth factor [EGF], platelet-derived growth factor [PDGF], transforming growth factor [TGF-β1], basic fibroblastic growth factor [bFGF]) and inflammatory factors (TNF-α, IL-1β, IL-6, IL-8). Moreover, AgNP solutions at lower concentrations exerted limited inhibitory effects on cell proliferation and had no effect on cytokine secretion. The AgNP-CCD demonstrated satisfactory morphological and physical properties as well as efficient antibacterial activities. An in vivo evaluation indicated that AgNP-CCD could accelerate the healing process of deep second-degree burn wounds and played an important role in the regulation of growth and inflammatory factors, including VEGF, EGFL-7, TGF-β1, bFGF, TNF-α and IL-1β. This AgNP-CCD exerted excellent biological effects on wound healing promotion and cytokine expression regulation.