Biologic scaffolds composed of central nervous system extracellular matrix

Adhesion and proliferation of bone marrow stromal cells on acellular spinal cord scaffolds

OBJECTIVES

This study aimed to produce an acellular spinal cord scaffold-bone marrow stromal cell (ASCS-BMSC) complex in which the growth of BMSCs transplanted into the spinal cord of rats could be simulated in vitro, facilitating the observation and evaluation of the growth of BMSCs on the ASCS for the first time.

METHODS

Freeze-thaw, chemical extraction and mechanical shaking approaches were used to remove the cellular components and prepare a rat ASCS containing only the extracellular matrix (ECM) structure from the rat spinal cord. BMSCs were embedded into ASCSs and freeze-dried agarose scaffolds (FASs), and cell migration and proliferation were observed via fluorescence microscopy and the MTT assay.

RESULTS

Compared with the normal rat spinal cord, the ASCS had no cell structure and retained ECM components such as type IV collagen, fibronectin and laminin, showing a three-dimensional network structure with good voids. The growth and proliferation of BMSCs on the ASCS was good, as shown by the MTT assay. Scanning electron microscopy showed that BMSCs covered 65% of the ASCS surface, and the mitochondria of BMSCs were developed and adhered to collagen fibres, as demonstrated by transmission electron microscopy. HE staining showed that BMSCs could grow inside the ASCS, and immunohistochemical staining showed that BMSCs still expressed CD44 and CD90 on the ASCS and had stem cell characteristics.

CONCLUSIONS

The results of the experiment indicate that the ASCS has the ability to improve cell adhesion and proliferation. Thus, the ASCS-BMSC combination may be used to treat spinal cord injury.

The Effect of Aligned and Random Electrospun Fibers Derived from Porcine Decellularized ECM on Mesenchymal Stem Cell-Based Treatments for Spinal Cord Injury

The impact of traumatic spinal cord injury (SCI) can be extremely devastating, as it often results in the disruption of neural tissues, impeding the regenerative capacity of the central nervous system. However, recent research has demonstrated that mesenchymal stem cells (MSCs) possess the capacity for multi-differentiation and have a proven track record of safety in clinical applications, thus rendering them effective in facilitating the repair of spinal cord injuries. It is urgent to develop an aligned scaffold that can effectively load MSCs for promoting cell aligned proliferation and differentiation. In this study, we prepared an aligned nanofiber scaffold using the porcine decellularized spinal cord matrix (DSC) to induce MSCs differentiation for spinal cord injury. The decellularization method removed 87% of the immune components while retaining crucial proteins in DSC. The electrospinning technique was employed to fabricate an aligned nanofiber scaffold possessing biocompatibility and a diameter of 720 nm. In in vitro and in vivo experiments, the aligned nanofiber scaffold induces the aligned growth of MSCs and promotes their differentiation into neurons, leading to tissue regeneration and nerve repair after spinal cord injury. The approach exhibits promising potential for the future development of nerve regeneration scaffolds for spinal cord injury treatment.

Development of Combinatorial Therapeutics for Spinal Cord Injury using Stem Cell Delivery

Traumatic spinal cord injury (SCI) induces permanent sensorimotor deficit below the site of injury. It affects approximately a quarter million people in the US, and it represents an immeasurable public health concern. Research has been conducted to provide effective therapy; however, SCI is still considered incurable due to the complex nature of the injury site. A variety of strategies, including drug delivery, cell transplantation, and injectable biomaterials, are investigated, but one strategy alone limits their efficacy for regeneration. As such, combinatorial therapies have recently gained attention that can target multifaceted features of the injury. It has been shown that extracellular matrices (ECM) may increase the efficacy of cell transplantation for SCI. To this end, 3D hydrogels consisting of decellularized spinal cords (dSCs) and sciatic nerves (dSNs) were developed at different ratios and characterized. Histological analysis of dSCs and dSNs confirmed the removal of cellular and nuclear components, and native tissue architectures were retained after decellularization. Afterward, composite hydrogels were created at different volumetric ratios and subjected to analyses of turbidity gelation kinetics, mechanical properties, and embedded human adipose-derived stem cell (hASC) viability. No significant differences in mechanical properties were found among the different ratios of hydrogels and decellularized spinal cord matrices. Human ASCs embedded in the gels remained viable throughout the 14-day culture. This study provides a means of generating tissue-engineered combinatorial hydrogels that present nerve-specific ECM and pro-regenerative mesenchymal stem cells. This platform can provide new insights into neuro-regenerative strategies after SCI with future investigations.

Decellularized Brain Extracellular Matrix Hydrogel Aids the Formation of Human Spinal-Cord Organoids Recapitulating the Complex Three-Dimensional Organization

The intricate electrophysiological functions and anatomical structures of spinal cord tissue render the establishment of in vitro models for spinal cord-related diseases highly challenging. Currently, both in vivo and in vitro models for spinal cord-related diseases are still underdeveloped, complicating the exploration and development of effective therapeutic drugs or strategies. Organoids cultured from human induced pluripotent stem cells (hiPSCs) hold promise as suitable in vitro models for spinal cord-related diseases. However, the cultivation of spinal cord organoids predominantly relies on Matrigel, a matrix derived from murine sarcoma tissue. Tissue-specific extracellular matrices are key drivers of complex organ development, thus underscoring the urgent need to research safer and more physiologically relevant organoid culture materials. Herein, we have prepared a rat decellularized brain extracellular matrix hydrogel (DBECMH), which supports the formation of hiPSC-derived spinal cord organoids. Compared with Matrigel, organoids cultured in DBECMH exhibited higher expression levels of markers from multiple compartments of the natural spinal cord, facilitating the development and maturation of spinal cord organoid tissues. Our study suggests that DBECMH holds potential to replace Matrigel as the standard culture medium for human spinal cord organoids, thereby advancing the development of spinal cord organoid culture protocols and their application in in vitro modeling of spinal cord-related diseases.

Decellularized extracellular matrix enriched with GDNF enhances neurogenesis and remyelination for improved motor recovery after spinal cord injury

Motor functional improvement represents a paramount treatment objective in the post-spinal cord injury (SCI) recovery process. However, neuronal cell death and axonal degeneration following SCI disrupt neural signaling, impeding the motor functional recovery. In this study, we developed a multifunctional decellularized spinal cord-derived extracellular matrix (dSECM), crosslinked with glial cell-derived neurotrophic factor (GDNF), to promote differentiation of stem cells into neural-like cells and facilitate axonogenesis and remyelination. After decellularization, the immunogenic cellular components were effectively removed in dSECM, while the crucial protein components were retained which supports stem cells proliferation and differentiation. Furthermore, sustained release of GDNF from the dSECM facilitated axonogenesis and remyelination by activating the PI3K/Akt and MEK/Erk pathways. Our findings demonstrate that the dSECM-GDNF platform promotes neurogenesis, axonogenesis, and remyelination to enhance neural signaling, thereby yielding promising therapeutic effects for motor functional improvement after SCI. STATEMENT OF SIGNIFICANCE: The dSECM promotes the proliferation and differentiation of MSCs or NSCs by retaining proteins associated with positive regulation of neurogenesis and neuronal differentiation, while eliminating proteins related to negative regulation of neurogenesis. After crosslinking, GDNF can be gradually released from the platform, thereby promoting neural differentiation, axonogenesis, and remyelination to enhance neural signaling through activation of the PI3K/Akt and MEK/Erk pathways. In vivo experiments demonstrated that dSECM-GDNF/MSC@GelMA hydrogel exhibited the ability to facilitate neuronal regeneration at 4 weeks post-surgery, while promoting axonogenesis and remyelination at 8 weeks post-surgery, ultimately leading to enhanced motor functional recovery. This study elucidates the ability of neural regeneration strategy to promote motor functional recovery and provides a promising approach for designing multifunctional tissue for SCI treatment.

Exploring the properties and potential of the neural extracellular matrix for next-generation regenerative therapies

The extracellular matrix (ECM) is a dynamic and complex network of proteins and molecules that surrounds cells and tissues in the nervous system and orchestrates a myriad of biological functions. This review carefully examines the diverse interactions between cells and the ECM, as well as the transformative chemical and physical changes that the ECM undergoes during neural development, aging, and disease. These transformations play a pivotal role in shaping tissue morphogenesis and neural activity, thereby influencing the functionality of the central nervous system (CNS). In our comprehensive review, we describe the diverse behaviors of the CNS ECM in different physiological and pathological scenarios and explore the unique properties that make ECM-based strategies attractive for CNS repair and regeneration. Addressing the challenges of scalability, variability, and integration with host tissues, we review how advanced natural, synthetic, and combinatorial matrix approaches enhance biocompatibility, mechanical properties, and functional recovery. Overall, this review highlights the potential of decellularized ECM as a powerful tool for CNS modeling and regenerative purposes and sets the stage for future research in this exciting field. This article is categorized under: Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Nanomedicine for Neurological Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants.

Differentiated mesenchymal stem cells-derived exosomes immobilized in decellularized sciatic nerve hydrogels for peripheral nerve repair

Peripheral nerve injury (PNI) and the limitations of current treatments often result in incomplete sensory and motor function recovery, which significantly impact the patient's quality of life. While exosomes (Exo) derived from stem cells and Schwann cells have shown promise on promoting PNI repair following systemic administration or intraneural injection, achieving effective local and sustained Exo delivery holds promise to treat local PNI and remains challenging. In this study, we developed Exo-loaded decellularized porcine nerve hydrogels (DNH) for PNI repair. We successfully isolated Exo from differentiated human adipose-derived mesenchymal stem cells (hADMSC) with a Schwann cell-like phenotype (denoted as dExo). These dExo were further combined with polyethylenimine (PEI), and DNH to create polyplex hydrogels (dExo-loaded pDNH). At a PEI content of 0.1%, pDNH showed cytocompatibility for hADMSCs and supported neurite outgrowth of dorsal root ganglions. The sustained release of dExos from dExo-loaded pDNH persisted for at least 21 days both in vitro and in vivo. When applied around injured nerves in a mouse sciatic nerve crush injury model, the dExo-loaded pDNH group significantly improved sensory and motor function recovery and enhanced remyelination compared to dExo and pDNH only groups, highlighting the synergistic regenerative effects. Interestingly, we observed a negative correlation between the number of colony-stimulating factor-1 receptor (CSF-1R) positive cells and the extent of PNI regeneration at the 21-day post-surgery stage. Subsequent in vitro experiments demonstrated the potential involvement of the CSF-1/CSF-1R axis in Schwann cells and macrophage interaction, with dExo effectively downregulating CSF-1/CSF-1R signaling.

The Effect of Multilayered Electrospun PLLA Nanofibers Coated with Human Amnion or Bladder ECM Proteins on Epithelialization and Smooth Muscle Regeneration in the Rabbit Bladder

Nanofibrous scaffolds have attracted much attention in bladder reconstruction approaches due to their excellent mechanical properties. In addition, their biological properties can be improved by combination with biological materials. Taking into account the advantages of nanofibrous scaffolds and decellularized extracellular matrix (dECM) in tissue engineering, scaffolds of poly-L-lactic acid (PLLA) coated with decellularized human amnion membrane (hAM) or sheep bladder (SB)-derived ECM proteins are developed (amECM-coated PLLA and sbECM-coated PLLA, respectively). The bladder regenerative potential of modified electrospun PLLA scaffolds is investigated in rabbits. The presence of ECM proteins is confirmed on the nanofibers' surface. Coating the surface of the PLLA nanofibers improves cell adhesion and proliferation. Histological and immunohistochemical evaluations show that rabbits subjected to cystoplasty with a multilayered PLLA scaffold show de novo formation and maturation of the multilayered urothelial layer. However, smooth muscle bundles (myosin heavy chain [MHC] and α-smooth muscle actin [α-SMA] positive) are detected only in ECM-coated PLLA groups. All groups show no evidence of a diverticulumor fistula in the urinary bladder. These results suggest that the biofunctionalization of electrospun PLLA nanofibers with ECM proteins can be a promising option for bladder tissue engineering. Furthermore, hAM can also replace animal-sourced ECM proteins in bladder tissue regeneration approaches.

Decellularization and Their Significance for Tissue Regeneration in the Era of 3D Bioprinting

Three-dimensional bioprinting is an emerging technology that has high potential application in tissue engineering and regenerative medicine. Increasing advancement and improvement in the decellularization process have led to an increase in the demand for using a decellularized extracellular matrix (dECM) to fabricate tissue engineered products. Decellularization is the process of retaining the extracellular matrix (ECM) while the cellular components are completely removed to harvest the ECM for the regeneration of various tissues and across different sources. Post decellularization of tissues and organs, they act as natural biomaterials to provide the biochemical and structural support to establish cell communication. Selection of an effective method for decellularization is crucial, and various factors like tissue density, geometric organization, and ECM composition affect the regenerative potential which has an impact on the end product. The dECM is a versatile material which is added as an important ingredient to formulate the bioink component for constructing tissue and organs for various significant studies. Bioink consisting of dECM from various sources is used to generate tissue-specific bioink that is unique and to mimic different biometric microenvironments. At present, there are many different techniques applied for decellularization, and the process is not standardized and regulated due to broad application. This review aims to provide an overview of different decellularization procedures, and we also emphasize the different dECM-derived bioinks present in the current global market and the major clinical outcomes. We have also highlighted an overview of benefits and limitations of different decellularization methods and various characteristic validations of decellularization and dECM-derived bioinks.

Combined 3D bioprinting and tissue-specific ECM system reveals the influence of brain matrix on stem cell differentiation

We have previously shown that human and murine breast extracellular matrix (ECM) can significantly impact cellular behavior, including stem cell fate determination. It has been established that tissue-specific extracellular matrix from the central nervous system has the capacity to support neuronal survival. However, the characterization of its influence on stem cell differentiation and its adaptation to robust 3D culture models is underdeveloped. To address these issues, we combined our 3D bioprinter with hydrogels containing porcine brain extracellular matrix (BMX) to test the influence of the extracellular matrix on stem cell differentiation. Our 3D bioprinting system generated reproducible 3D neural structures derived from mouse embryonic stem cells (mESCs). We demonstrate that the addition of BMX preferentially influences 3D bioprinted mESCs towards neural lineages compared to standard basement membrane (Geltrex/Matrigel) hydrogels alone. Furthermore, we demonstrate that we can transplant these 3D bioprinted neural cellular structures into a mouse's cleared mammary fat pad, where they continue to grow into larger neural outgrowths. Finally, we demonstrate that direct injection of human induced pluripotent stem cells (hiPSCS) and neural stem cells (NSCs) suspended in pure BMX formed neural structures in vivo. Combined, these findings describe a unique system for studying brain ECM/stem cell interactions and demonstrate that BMX can direct pluripotent stem cells to differentiate down a neural cellular lineage without any additional specific differentiation stimuli.

Nerve regeneration using decellularized tissues: challenges and opportunities

In tissue engineering, the decellularization of organs and tissues as a biological scaffold plays a critical role in the repair of neurodegenerative diseases. Various protocols for cell removal can distinguish the effects of treatment ability, tissue structure, and extracellular matrix (ECM) ability. Despite considerable progress in nerve regeneration and functional recovery, the slow regeneration and recovery potential of the central nervous system (CNS) remains a challenge. The success of neural tissue engineering is primarily influenced by composition, microstructure, and mechanical properties. The primary objective of restorative techniques is to guide existing axons properly toward the distal end of the damaged nerve and the target organs. However, due to the limitations of nerve autografts, researchers are seeking alternative methods with high therapeutic efficiency and without the limitations of autograft transplantation. Decellularization scaffolds, due to their lack of immunogenicity and the preservation of essential factors in the ECM and high angiogenic ability, provide a suitable three-dimensional (3D) substrate for the adhesion and growth of axons being repaired toward the target organs. This study focuses on mentioning the types of scaffolds used in nerve regeneration, and the methods of tissue decellularization, and specifically explores the use of decellularized nerve tissues (DNT) for nerve transplantation.

A comparative study of human and porcine-derived decellularised nerve matrices

Decellularised extracellular matrix (dECM) biomaterials originating from allogeneic and xenogeneic tissues have been broadly studied in the field of regenerative medicine and have already been used in clinical treatments. Allogeneic dECMs are considered more compatible, but they have the drawback of extremely limited human tissue sources. Their availability is also restricted by the health and age of the donors. To investigate the viability of xenogeneic tissues as a substitute for human tissues, we fabricated both porcine decellularised nerve matrix (pDNM) and human decellularised nerve matrix for a comprehensive comparison. Photomicrographs showed that both dECM scaffolds retained the ECM microstructures of native human nerve tissues. Proteomic analysis demonstrated that the protein compositions of both dECMs were also very similar to each other. Their functional ECM contents effectively promoted the proliferation, migration, and maturation of primary human Schwann cells in vitro. However, pDNM contained a few antigens that induced severe host immune responses in humanised mice. Interestingly, after removing the α-galactosidase antigen, the immune responses were highly alleviated and the pre-treated pDNM maintained a human decellularised nerve matrix-like pro-regenerative phenotype. Therefore, we believe that an α-galactosidase-free pDNM may serve as a viable substitute for human decellularised nerve matrix in future clinical applications.

Electrospun decellularized extracellular matrix scaffolds promote the regeneration of injured neurons

Traumatic injury to the spinal cord (SCI) causes the transection of neurons, formation of a lesion cavity, and remodeling of the microenvironment by excessive extracellular matrix (ECM) deposition and scar formation leading to a regeneration-prohibiting environment. Electrospun fiber scaffolds have been shown to simulate the ECM and increase neural alignment and neurite outgrowth contributing to a growth-permissive matrix. In this work, electrospun ECM-like fibers providing biochemical and topological cues are implemented into a scaffold to represent an oriented biomaterial suitable for the alignment and migration of neural cells in order to improve spinal cord regeneration. The successfully decellularized spinal cord ECM (dECM), with no visible cell nuclei and dsDNA content < 50 ng/mg tissue, showed preserved ECM components, such as glycosaminoglycans and collagens. Serving as the biomaterial for 3D printer-assisted electrospinning, highly aligned and randomly distributed dECM fiber scaffolds (< 1 µm fiber diameter) were fabricated. The scaffolds were cytocompatible and supported the viability of a human neural cell line (SH-SY5Y) for 14 days. Cells were selectively differentiated into neurons, as confirmed by immunolabeling of specific cell markers (ChAT, Tubulin ß), and followed the orientation given by the dECM scaffolds. After generating a lesion site on the cell-scaffold model, cell migration was observed and compared to reference poly-ε-caprolactone fiber scaffolds. The aligned dECM fiber scaffold promoted the fastest and most efficient lesion closure, indicating superior cell guiding capabilities of dECM-based scaffolds. The strategy of combining decellularized tissues with controlled deposition of fibers to optimize biochemical and topographical cues opens the way for clinically relevant central nervous system scaffolding solutions.

Neural Differentiation of Induced Pluripotent Stem Cells for a Xenogeneic Material-Free 3D Neurological Disease Model Neurulation from Pluripotent Cells Using a Human Hydrogel

Alzheimer's Disease (AD) is characterized by synapse and neuronal loss and the accumulation of neurofibrillary tangles and Amyloid β plaques. Despite significant research efforts to understand the late stages of the disease, its etiology remains largely unknown. This is in part because of the imprecise AD models in current use. In addition, little attention has been paid to neural stem cells (NSC), which are the cells responsible for the development and maintenance of brain tissue during an individual's lifespan. Thus, an in vitro 3D human brain tissue model using induced pluripotent stem (iPS) cell-derived neural cells in human physiological conditions may be an excellent alternative to standard models to investigate AD pathology. Following the differentiation process mimicking development, iPS cells can be turned into NSCs and, ultimately, neural cells. During differentiation, the traditionally used xenogeneic products may alter the cells' physiology and prevent accurate disease pathology modeling. Hence, establishing a xenogeneic material-free cell culture and differentiation protocol is essential. This study investigated the differentiation of iPS cells to neural cells using a novel extracellular matrix derived from human platelet lysates (PL Matrix). We compared the stemness properties and differentiation efficacies of iPS cells in a PL matrix against those in a conventional 3D scaffold made of an oncogenic murine-matrix. Using well-defined conditions without xenogeneic material, we successfully expanded and differentiated iPS cells into NSCs via dual-SMAD inhibition, which regulates the BMP and TGF signaling cascades in a manner closer to human conditions. This in vitro, 3D, xenogeneic-free scaffold will enhance the quality of disease modeling for neurodegenerative disease research, and the knowledge produced could be used in developing more effective translational medicine.

Decellularized brain extracellular matrix slice glioblastoma culture model recapitulates the interaction between cells and the extracellular matrix without a nutrient-oxygen gradient interference

Decellularized extracellular matrix (dECM) is a valuable tool for generating three-dimensional in vitro tumor models that effectively recapitulate tumor-extracellular matrix (ECM) interactions. However, in current culture models, the components and structures of dECM are enzymatically disrupted to form hydrogels, making it difficult to recapitulate the native ECM. Additionally, when studying ECM-cell interactions, large-volume tumor culture models are incompatible with traditional experimental techniques and the nutrient-oxygen concentration gradient, which is a significant confounding factor. To address these issues, we developed a decellularized brain extracellular matrix slice (dBECMS) glioblastoma (GBM) culture model. This model possesses good light transmittance and substance diffusivity, making it compatible with traditional experimental techniques without forming nutrient-oxygen concentration gradients. Through transcriptomic analysis, we found that native brain ECM has a broad impact on glioma cells; the impact involves the ECM-ECM receptor interactions and the ECM and metabolic reprogramming. Further experiments demonstrated that dBECMS promoted glucose consumption and lactate production in GBM cells. Silver staining experiments revealed abundant proteins in the media of dBECMS, suggesting the degradation of the brain ECM by GBM cells. Transcriptome analysis also showed that the dBECMS-GBM culture model more accurately recapitulated the transcriptional profile of GBM than the two-dimensional culture. We experimentally demonstrated that the dBECMS-GBM model enhanced the resistance of GBM cells to temozolomide and increased the stemness of GBM cells. Additionally, we demonstrated the feasibility of the dBECMS-GBM model as a platform for drug response modeling. STATEMENT OF SIGNIFICANCE: The decellularized brain extracellular matrix (ECM) slice glioblastoma culture model mimics the interaction between native brain ECM and glioblastoma when glioblastoma infiltrates the brain and reveals the effects of native brain ECM on glioblastoma metabolism, ECM reprogramming, drug responsiveness, and stemness.

Development of Brain-Derived Bioscaffolds for Neural Progenitor Cell Culture

Biomaterials derived from brain extracellular matrix (ECM) have the potential to promote neural tissue regeneration by providing instructive cues that can direct cell survival, proliferation, and differentiation. This study focused on the development and characterization of microcarriers derived from decellularized brain tissue (DBT) as a platform for neural progenitor cell culture. First, a novel detergent-free decellularization protocol was established that effectively reduced the cellular content of porcine and rat brains, with a >97% decrease in the dsDNA content, while preserving collagens (COLs) and glycosaminoglycans (GAGs). Next, electrospraying methods were applied to generate ECM-derived microcarriers incorporating the porcine DBT that were stable without chemical cross-linking, along with control microcarriers fabricated from commercially sourced bovine tendon COL. The DBT microcarriers were structurally and biomechanically similar to the COL microcarriers, but compositionally distinct, containing a broader range of COL types and higher sulfated GAG content. Finally, we compared the growth, phenotype, and neurotrophic factor gene expression levels of rat brain-derived progenitor cells (BDPCs) cultured on the DBT or COL microcarriers within spinner flask bioreactors over 2 weeks. Both microcarrier types supported BDPC attachment and expansion, with immunofluorescence staining results suggesting that the culture conditions promoted BDPC differentiation toward the oligodendrocyte lineage, which may be favorable for cell therapies targeting remyelination. Overall, our findings support the further investigation of the ECM-derived microcarriers as a platform for neural cell derivation for applications in regenerative medicine.

A simple method to isolate structurally and chemically intact brain vascular basement membrane for neural regeneration following traumatic brain injury

BACKGROUND

The brain vascular basement membrane (brain-VBM) is an important component of the brain extracellular matrix, and the three-dimensional structure of the cerebrovascular network nested with many cell-adhesive proteins may provide guidance for brain tissue regeneration. However, the potential of ability of brain-VBM to promote neural tissue regeneration has not been examined due to the technical difficulty of isolating intact brain-VBM.

METHODS

The present study developed a simple, effective method to isolate structurally and compositionally intact brain-VBM. Structural and component properties of the brain-VBM were characterized to confirm the technique. Seed cells were cocultured with brain-VBM in vitro to analyze biocompatibility and neurite extension. An experimental rat model of focal traumatic brain injury (TBI) induced by controlled cortical impact were conducted to further test the tissue regeneration ability of brain-VBM.

RESULTS

Brain-VBM isolated using genipin showed significantly improved mechanical properties, was easy to handle, supported high cell viability, exhibited strong cell adhesive properties, and promoted neurite extension and outgrowth. Further testing of the isolated brain-VBM transplanted at lesion sites in an experimental rat model of focal TBI demonstrated considerable promise for reconstructing a complete blood vessel network that filled in the lesion cavity and promoting repopulation of neural progenitor cells and neurons.

CONCLUSION

The technique allows isolation of intact brain-VBM as a 3D microvascular scaffold to support brain tissue regeneration following TBI and shows considerable promise for the production of naturally-derived biomaterials for neural tissue engineering.

A Dual-network Nerve Adhesive with Enhanced Adhesion Strength Promotes Transected Peripheral Nerve Repair

Peripheral nerve transection has a high prevalence and results in functional loss of affected limbs. The current clinical treatment using suture anastomosis significantly limits nerve recovery due to severe inflammation, secondary damage, and fibrosis. Fibrin glue, a commercial nerve adhesive as an alternative, avoids secondary damage but suffers from poor adhesion strength. To address their limitations, a highly efficacious nerve adhesive based on dual-crosslinking of dopamine-isothiocyanate modified hyaluronic acid and decellularized nerve matrix is reported in this paper. This dual-network nerve adhesive (DNNA) shows controllable gelation behaviors feasible for surgical applications, robust adhesion strength, and promoted axonal outgrowth in vitro. The in vivo therapeutic efficacy is tested using a rat-based sciatic nerve transection model. The DNNA decreases fibrosis and accelerates axon/myelin debris clearance at 10 days post-surgery, compared to suture and commercial fibrin glue treatments. At 10 weeks post-surgery, the strong adhesion and bioactivity allow DNNA to significantly decrease intraneural inflammation and fibrosis, enhance axon connection and remyelination, aid motor and sensory function recovery, as well as improve muscle contraction, compared to suture and fibrin treatments. Overall, this dual-network hydrogel with robust adhesion provides a rapid and highly efficacious nerve transection treatment to facilitate nerve repair and neuromuscular function recovery.

Spinal cord decellularized matrix scaffold loaded with engineered basic fibroblast growth factor-overexpressed human umbilical cord mesenchymal stromal cells promoted the recovery of spinal cord injury

Spinal cord injury (SCI) will lead to irreversible damage of sensory and motor function of central nervous system, which seriously affects patient's quality of life. A variety of nerve engineering materials carrying various stem cells and cell growth factors had used to promote the repair of SCI, but they could not mimic the actual matric niche at spinal cord to promote cell proliferation and differentiation. Thus, developing novel biomaterial providing better niche of spinal cord is a new strategy to treat the severe SCI. In this study, we constructed porcine spinal cord decellularized matrix scaffold (SC-DM) with biocompatibility to load engineered basic fibroblast growth factor-overexpressing human umbilical cord mesenchymal stromal cells (bFGF-HUCMSCs) for treating SCI. The continuously released bioactive bFGF factors from grafted bFGF-HUCMSCs and three-dimensional niche by SC-DM promoted the differentiation of endogenous stem cells into neurons with nerve conduction function, leading a markedly motor function recovery of SCI. These results indicated that the functional bFGF-HUCMSCs/SC-DM scaffold provided more suitable matric niche for nerve cells, that would be a promising strategy for the clinical application of SCI.

Message in a Scaffold: Natural Biomaterials for Three-Dimensional (3D) Bioprinting of Human Brain Organoids

Brain organoids are invaluable tools for pathophysiological studies or drug screening, but there are still challenges to overcome in making them more reproducible and relevant. Recent advances in three-dimensional (3D) bioprinting of human neural organoids is an emerging approach that may overcome the limitations of self-organized organoids. It requires the development of optimal hydrogels, and a wealth of research has improved our knowledge about biomaterials both in terms of their intrinsic properties and their relevance on 3D culture of brain cells and tissue. Although biomaterials are rarely biologically neutral, few articles have reviewed their roles on neural cells. We here review the current knowledge on unmodified biomaterials amenable to support 3D bioprinting of neural organoids with a particular interest in their impact on cell homeostasis. Alginate is a particularly suitable bioink base for cell encapsulation. Gelatine is a valuable helper agent for 3D bioprinting due to its viscosity. Collagen, fibrin, hyaluronic acid and laminin provide biological support to adhesion, motility, differentiation or synaptogenesis and optimize the 3D culture of neural cells. Optimization of specialized hydrogels to direct differentiation of stem cells together with an increased resolution in phenotype analysis will further extend the spectrum of possible bioprinted brain disease models.

Decellularized matrix for repairing intervertebral disc degeneration: Fabrication methods, applications and animal models

Intervertebral disc degeneration (IDD)-induced low back pain significantly influences the quality of life, placing a burden on public health systems worldwide. Currently available therapeutic strategies, such as conservative or operative treatment, cannot effectively restore intervertebral disc (IVD) function. Decellularized matrix (DCM) is a tissue-engineered biomaterial fabricated using physical, chemical, and enzymatic technologies to eliminate cells and antigens. By contrast, the extracellular matrix (ECM), including collagen and glycosaminoglycans, which are well retained, have been extensively studied in IVD regeneration. DCM inherits the native architecture and specific-differentiation induction ability of IVD and has demonstrated effectiveness in IVD regeneration in vitro and in vivo. Moreover, significant improvements have been achieved in the preparation process, mechanistic insights, and application of DCM for IDD repair. Herein, we comprehensively summarize and provide an overview of the roles and applications of DCM for IDD repair based on the existing evidence to shed a novel light on the clinical treatment of IDD.

Neural progenitor cell-derived extracellular matrix as a new platform for neural differentiation of human induced pluripotent stem cells

The culture microenvironment has been demonstrated to regulate stem cell fate and to be a crucial aspect for quality-controlled stem cell maintenance and differentiation to a specific lineage. In this context, extracellular matrix (ECM) proteins are particularly important to mediate the interactions between the cells and the culture substrate. Human induced pluripotent stem cells (hiPSCs) are usually cultured as anchorage-dependent cells and require adhesion to an ECM substrate to support their survival and proliferation in vitro. Matrigel, a common substrate for hiPSC culture is a complex and undefined mixture of ECM proteins which are expensive and not well suited to clinical application. Decellularized cell-derived ECM has been shown to be a promising alternative to the common protein coatings used in stem cell culture. However, very few studies have used this approach as a niche for neural differentiation of hiPSCs. Here, we developed a new stem cell culture system based on decellularized cell-derived ECM from neural progenitor cells (NPCs) for expansion and neural differentiation of hiPSCs, as an alternative to Matrigel and poly-l-ornithine/laminin-coated well plates. Interestingly, hiPSCs were able to grow and maintain their pluripotency when cultured on decellularized ECM from NPCs (NPC ECM). Furthermore, NPC ECM enhanced the neural differentiation of hiPSCs compared to poly-l-ornithine/laminin-coated wells, which are used in most neural differentiation protocols, presenting a statistically significant enhancement of neural gene expression markers, such as βIII-Tubulin and MAP2. Taken together, our results demonstrate that NPC ECM provides a functional microenvironment, mimicking the neural niche, which may have interesting future applications for the development of new strategies in neural stem cell research.

Construction of a decellularized spinal cord matrix/GelMA composite scaffold and its effects on neuronal differentiation of neural stem cells

Spinal cord injury (SCI) leads to severe loss of motor and sensory functions, and the rehabilitation of SCI is a worldwide problem. Tissue-engineered scaffolds offer new hope for SCI patients, while the newly developed materials encountered a challenge in modeling the microenvironment around the lesion site. We constructed a new composite scaffold by mixing decellularized spinal cord extracellular matrix (dECM) with gelatin methacryloyl (GelMA). The dECM, as a natural biological material, retained a large number of proteins and growth factors related to neurogenesis. GelMA was a photopolymerizable material, harbored a polymer network structure, soft texture, certain shape and plenty of water. The viability, proliferation, and differentiation of neural stem cells (NSCs) on the composite scaffold were evaluated by cell count kit-8 (CCK8), Live/Dead assay, phalloidin staining, 5-Ethynyl-2'-deoxyurdine (EdU), immunofluorescence staining and western blot. The Live/Dead assay, phalloidin staining, EdU, and CCK8 assay showed that the composite scaffold had good biocompatibility and provided better support for proliferation of NSCs. Results of immunocytochemistry and western blot showed that the composite scaffolds promoted the specific differentiation of NSCs into neuron cells. Together, this dECM/GelMA composite scaffold can be used as a cell culture coating, the isolated NSCs seeded on the surface of composite scaffold expressed neuronal markers and assumed neuronal morphology. Our work provided a new method that would be widely used in tissue engineering of SCI.

In vitro study of decellularized rat tissues for nerve regeneration

Peripheral nerve injuries cause an absence or destruction of nerves. Decellularized nerves, acting as a replacement for autografts, have been investigated in the promotion of nerve repair and regeneration, always being incorporated with stem cells or growth factors. However, such a strategy is limited by size availability. The potential application in heterotopic transplantation of other decellularized tissues needs to be further explored. In this study, rat decellularized kidney (dK) was selected to be compared with decellularized peripheral nerve (dN), since dK has aboundant ECM components and growth factors. The PC-12 cells were cultured on dK and dN scaffolds, as shown in the similar behaviors of cell metabolism and viability, but have a more regular arrangement on dN compared to dK, indicating that the natural structure plays an important role in guiding cell extension. However, we found significant upregulation of axon–growth–associated genes and proteins of PC-12 cells in the dK group compared to the dN group by qRT-PCR, immunofluorescence, and western blotting. Furthermore, various neurotrophic factors and growth factors of acellular kidney and nerve were evaluated by ELISA assay. The lower expression of neurotrophic factors but higher expression of growth factors such as VEGF and HGF from dK suggests that axon growth and extension for PC-12 cells may be partially mediated by VEGF and HGF expression from decellularized kidney, which further points to a potential application in nerve repair and regeneration.

Development of Bio-artificial Esophageal Tissue Engineering Utilization for Circumferential Lesion Transplantation: A Narrative Review

The esophagus is the gastrointestinal tract's primary organ that transfers bolus into the stomach with peristaltic motion. Therefore, its lesions cause a significant disturbance in the nutrition and digestive system. Esophageal disease treatment sometimes requires surgical procedures that involve removal and circumferential full-thickness replacement. Unlike other organs, the esophagus has a limited regeneration ability and cannot be transplanted from donors. There are various methods of restoring the esophageal continuity; however, they are associated with certain flaws that lead to a non-functional recovery. As an exponentially growing science, tissue engineering has become a leading technique for the development of tissue replacement to repair damaged esophageal segments. Scaffold plays a significant role in the process of tissue engineering, as it acts as a template for the regeneration of growing tissue. A variety of scaffolds have been studied to replace the esophagus. Due to the many tissue quality challenges, the results are still inadequate and need to be improved. The success of esophageal tissue regeneration will finally depend on the scaffold's capability to mimic natural tissue properties and provide a qualified environment for regeneration. Thereby, scaffold fabrication techniques are fundamental. This article reviews the recent developments in esophageal tissue engineering for the treatment of circumferential lesions based on scaffold biomaterial engineering approaches.

Decellularization alters the unfavorable regenerative adverse microenvironment of the injured spinal cord to support neurite outgrowth

Background

Acellular tissue has been transplanted into the injury site as an external microenvironment to intervene with imbalance microenvironment that occurs after spinal cord injury (SCI) and stimulating axonal regeneration, although the mechanism is unclear. Given decellularization is the key means to obtain acellular tissues, we speculated changes in the internal components of tissue caused by decellularization may be the key reason why acellular tissues affect remodeling of the microenvironment.

Methods

Complete spinal cord crush in a mouse model was established, and the dynamic of extracellular matrix (ECM) expression and distribution during SCI was studied with immunohistochemistry (IHC). Normal spinal cord (NSC) and 14-day injury spinal cord (ISC) were obtained to prepare the decellularized NSC (DNSC) and decellularized ISC (DISC) through a well-designed decellularization method, and the decellularization effects were evaluated by residual DNA content determination, hematoxylin and eosin staining (H&E), and IHC. Rat dorsal root ganglia (DRG) were co-cultured with NSC, ISC, DNSC, and DISC to evaluate their effect on neurite outgrowth. Furthermore, the mechanisms by which decellularized tissue promotes axonal growth were explored with proteomics analysis of the protein components and function of 14-day ISC and DISC.

Results

We found the expression of the four main ECM components (collagen type I and IV, fibronectin, and laminin) gradually increased with the progression of SCI compared to NSC, peaking at 14 days of injury then slightly decreasing at 21 days, and the distribution of the four ECM proteins in the ISC also changed dynamically. H&E staining, residual DNA content determination, and IHC showed decellularization removed cellular components and preserved an intact ECM. The results of co-cultured DRG with NSCs, ISCs, DNSCs, and DISCs showed DNSCs and DISCs had a stronger ability in supporting neurite outgrowth than NSC and ISC. We found through proteomics that decellularization could remove proteins associated with inflammatory responses, scarring, and other pathological factors, while completely retaining the ECM proteins.

Conclusions

Taken together, our findings demonstrate decellularization can optimize the imbalanced microenvironment after SCI by removing components that inhibit spinal cord regeneration, providing a theoretical basis for clinical application of acellular tissue transplantation to repair SCI.

A decellularized spinal cord extracellular matrix-gel/GelMA hydrogel three-dimensional composite scaffold promotes recovery from spinal cord injury via synergism with human menstrual blood-derived stem cells

Spinal cord injury (SCI), as a serious disabling disease, is still haunted by lacking of effective treatments. We previously found that transplantation of menstrual blood-derived mesenchymal stem cells (MenSCs) promoted axon regeneration in rats with SCI, while the abominable microenvironment after the SCI inhibited the survival of stem cells after transplantation. Biomaterials can support the activity of stem cells and accelerate the functional reconstruction of the injured spinal cord. In this study, we constructed a novel composite scaffold consisting of the decellularized spinal cord extracellular matrix-gel (DSCG) and the GelMA hydrogel, which harbored high water retention, wettability, degradability and soft mechanical property. In vitro, the DSCG/GelMA composite scaffold provided a dual bionic microenvironment with optimized bioactive components and favorable microstructures for the adhesion, proliferation and differentiation of MenSCs. After that, we prepared MenSC-encapsulated DSCG/GelMA composite scaffolds to bridge the 2 mm gap in rats with completely transected SCI. The in vivo results showed that the combined use of the DSCG/GelMA composite scaffold with MenSCs improved the motor function, reduced the inflammatory response, promoted neuronal differentiation, and inhibited the proliferation of reactive astrocytes after spinal cord injury. Altogether, our study provided a promising novel therapeutic option of using bioactive materials synergistic with stem cells for the treatment of SCI.

Peripheral Nerve Decellularization for In Vitro Extracellular Matrix Hydrogel Use: A Comparative Study

The rise of tissue-engineered biomaterials has introduced more clinically translatable models of disease, including three-dimensional (3D) decellularized extracellular matrix (dECM) hydrogels. Specifically, decellularized nerve hydrogels have been utilized to model peripheral nerve injuries and disorders in vitro; however, there lacks standardization in decellularization methods. Here, rat sciatic nerves of varying preparations were decellularized using previously established methods: sodium deoxycholate (SD)-based, 3-((3-cholamidopropyl)dimethylammonio)-1-propanesulfonate (CHAPS)-based, and apoptosis-mediated. These nerves were characterized for cellular debris removal, ECM retention, and low cytotoxicity with cultured Schwann cells. The best preparations of each decellularization method were digested into dECM hydrogels, and rheological characterization, gelation kinetics, and confocal reflectance imaging of collagen fibril assembly were performed. It was determined that the SD-based method with nerve epineurial removal best maintained the overall ECM composition and mechanical properties of physiological peripheral nerves while efficiently stripping the scaffolds of tissue-specific cells and debris. This method was then utilized as a culture platform for quiescent Schwann cells and cancer-nerve crosstalk. Hydrogel-embedded Schwann cells were found to have high viability and act in a more physiologically relevant manner than those cultured in monolayers, and the hydrogel platform allowed for the activation of Schwann cells following treatment with cancer secreted factors. These findings establish a standard for peripheral nerve decellularization for usage as a dECM hydrogel testbed for in vitro peripheral nerve disease modeling and may facilitate the development of treatments for peripheral nerve disease and injury.

Mechanotransduction: Exploring New Therapeutic Avenues in Central Nervous System Pathology

Cells are continuously exposed to physical forces and the central nervous system (CNS) is no exception. Cells dynamically adapt their behavior and remodel the surrounding environment in response to forces. The importance of mechanotransduction in the CNS is illustrated by exploring its role in CNS pathology development and progression. The crosstalk between the biochemical and biophysical components of the extracellular matrix (ECM) are here described, considering the recent explosion of literature demonstrating the powerful influence of biophysical stimuli like density, rigidity and geometry of the ECM on cell behavior. This review aims at integrating mechanical properties into our understanding of the molecular basis of CNS disease. The mechanisms that mediate mechanotransduction events, like integrin, Rho/ROCK and matrix metalloproteinases signaling pathways are revised. Analysis of CNS pathologies in this context has revealed that a wide range of neurological diseases share as hallmarks alterations of the tissue mechanical properties. Therefore, it is our belief that the understanding of CNS mechanotransduction pathways may lead to the development of improved medical devices and diagnostic methods as well as new therapeutic targets and strategies for CNS repair.

Decellularized extracellular matrix scaffolds: Recent trends and emerging strategies in tissue engineering

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Regulation of Schwann Cell and DRG Neurite Behaviors within Decellularized Peripheral Nerve Matrix

Decellularized nerve hydrogels (dNHs) containing bioactive molecules are promising biomaterials for peripheral nerve injury (PNI) treatment and have been extensively applied in clinical and preclinical practice. However, most previous research projects studied their influences on nerve-related cellular behaviors in two dimensions (2D) without taking hydrogel biomechanics into consideration. The molecular mechanisms underlying the beneficial microenvironment provided by dNHs also remain unclear. In this study, dNHs from rat sciatic nerves were prepared, and their effects on Schwann cell (SC) and dorsal root ganglion (DRG) neurite behaviors were evaluated and compared to commercial rat tail type I collagen (Col) hydrogels in three-dimensional (3D) environments. We found that dNHs could promote SC proliferation and neurite outgrowth, and both the hydrogel mechanics and components contributed to the dNH functionalization. Through proteomics analysis, we found that laminin (LAM) and type V collagen (COLV) exclusively and abundantly existed in dNHs. By adding exogenous LAM and COLV into Col hydrogels, we demonstrated that they regulated SC gene expression and that LAM could promote SC spreading and neurite outgrowth, while COLV improved SC proliferation. Lastly, dNHs were fabricated into paper-like, aligned nerve scaffolds through unidirectional freezing to expand the dNH applications in PNI treatment.

Decellularized extracellular matrix mediates tissue construction and regeneration

Contributing to organ formation and tissue regeneration, extracellular matrix (ECM) constituents provide tissue with three-dimensional (3D) structural integrity and cellular-function regulation. Containing the crucial traits of the cellular microenvironment, ECM substitutes mediate cell-matrix interactions to prompt stem-cell proliferation and differentiation for 3D organoid construction in vitro or tissue regeneration in vivo. However, these ECMs are often applied generically and have yet to be extensively developed for specific cell types in 3D cultures. Cultured cells also produce rich ECM, particularly stromal cells. Cellular ECM improves 3D culture development in vitro and tissue remodeling during wound healing after implantation into the host as well. Gaining better insight into ECM derived from either tissue or cells that regulate 3D tissue reconstruction or organ regeneration helps us to select, produce, and implant the most suitable ECM and thus promote 3D organoid culture and tissue remodeling for in vivo regeneration. Overall, the decellularization methodologies and tissue/cell-derived ECM as scaffolds or cellular-growth supplements used in cell propagation and differentiation for 3D tissue culture in vitro are discussed. Moreover, current preclinical applications by which ECM components modulate the wound-healing process are reviewed.

Decellularised extracellular matrix-based biomaterials for repair and regeneration of central nervous system

The central nervous system (CNS), consisting of the brain and spinal cord, regulates the mind and functions of the organs. CNS diseases, leading to changes in neurological functions in corresponding sites and causing long-term disability, represent one of the major public health issues with significant clinical and economic burdens worldwide. In particular, the abnormal changes in the extracellular matrix under various disease conditions have been demonstrated as one of the main factors that can alter normal cell function and reduce the neuroregeneration potential in damaged tissue. Decellularised extracellular matrix (dECM)-based biomaterials have been recently utilised for CNS applications, closely mimicking the native tissue. dECM retains tissue-specific components, including proteoglycan as well as structural and functional proteins. Due to their unique composition, these biomaterials can stimulate sensitive repair mechanisms associated with CNS damages. Herein, we discuss the decellularisation of the brain and spinal cord as well as recellularisation of acellular matrix and the recent progress in the utilisation of brain and spinal cord dECM.

Construction of a niche-specific spinal white matter-like tissue to promote directional axon regeneration and myelination for rat spinal cord injury repair

Directional axon regeneration and remyelination are crucial for repair of spinal cord injury (SCI), but existing treatments do not effectively promote those processes. Here, we propose a strategy for construction of niche-specific spinal white matter-like tissue (WMLT) using decellularized optic nerve (DON) loaded with neurotrophin-3 (NT-3)-overexpressing oligodendrocyte precursor cells. A rat model with a white matter defect in the dorsal spinal cord of the T10 segment was used. The WMLT transplantation group showed significant improvement in coordinated motor functions compared with the control groups. WMLT transplants integrated well with host spinal cord white matter, effectively addressing several barriers to directional axonal regeneration and myelination during SCI repair. In WMLT, laminin was found to promote development of oligodendroglial lineage (OL) cells by binding to laminin receptors. Interestingly, laminin could also guide linear axon regeneration via interactions with specific integrins on the axon surface. The WMLT developed here utilizes the unique microstructure and bioactive matrix of DON to create a niche rich in laminin, NT-3 and OL cells to achieve significant structural repair of SCI. Our protocol can help to promote research on repair of nerve injury and construction of neural tissues and organoids that form specific cell niches.

Safety and efficacy of an injectable nerve-specific hydrogel in a rodent crush injury model

INTRODUCTION/AIMS

While the peripheral nervous system has the inherent ability to recover following injury, results are often unsatisfactory, resulting in permanent functional deficits and disability. Therefore, methods that enhance regeneration are of significant interest. The present study investigates an injectable nerve-tissue-specific hydrogel as a biomaterial for nerve regeneration in a rat nerve crush model.

METHODS

Nerve-specific hydrogels were injected into the subepineurial space in both uninjured and crushed sciatic nerves of rats to assess safety and efficacy, respectively. The animals were followed longitudinally for 12 wk using sciatic functional index and kinematic measures. At 12 wk, electrophysiologic examination was also performed, followed by nerve and muscle histologic assessment.

RESULTS

When the hydrogel was injected into an uninjured nerve, no differences in sciatic functional index, kinematic function, or axon counts were observed. A slight reduction in muscle fiber diameter was observed in the hydrogel-injected animals, but overall muscle area and kinematic function were not affected. Hydrogel injection following nerve crush injury resulted in multiple modest improvements in sciatic functional index and kinematic function with an earlier return to normal function observed in the hydrogel treated animals as compared to untreated controls. While no improvements in supramaximal compound motor action potential were observed in hydrogel treated animals, increased axon counts were observed on histologic assessment.

DISCUSSION

These improvements in functional and histologic outcomes in a rapidly and fully recovering model suggest that injection of a nerve-specific hydrogel is safe and has the potential to improve outcomes following nerve injury.

Preparation of decellularized optic nerve grafts

BACKGROUND

Decellularized tissues based on well-conserved extracellular matrices (ECMs) are a common area of research in tissue engineering. Although several decellularization protocols have been suggested for several types of tissues, studies on the optic nerve have been limited.

METHODS

We report decellularization protocol with different detergent for the preparation of acellular optic nerve and tissues were examined. DNA, glycosaminoglycan (GAG), and collagen content of the groups were evaluated with biochemical analyses and examined with histological staining. Mechanical properties, chemical components as well as cytotoxic properties of tissues were compared.

RESULTS

According to the results, it was determined that TX-100 (Triton X-100) was insufficient in decellularization when used alone. In addition, it was noticed that 85% of GAG content was preserved by using TX-100 and TX-100-SD (sodium deoxycholate), while this ratio was calculated as 30% for SDS. In contrast, the effect of the decellularization protocols on ECM structure of the tissues was evaluated by scanning and transmission electron microscopy (SEM and TEM) and determined their mechanical properties. Cytotoxicity analyses were exhibited minimum 95% cell viability for all groups, suggesting that there are no cytotoxic properties of the methods on L929 mouse fibroblast cells.

CONCLUSIONS

The combination of TX-100-SD and TX-100-SDS (sodium dodecyl sulfate) were was determined as the most effective methods to the literature for optic nerve decellularization.

Self-Assembling Hydrogel Structures for Neural Tissue Repair

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Decellularized spinal cord meninges extracellular matrix hydrogel that supports neurogenic differentiation and vascular structure formation

Decellularization of extracellular matrices offers an alternative source of regenerative biomaterials that preserve biochemical structure and matrix components of native tissues. In this study, decellularized bovine spinal cord meninges (dSCM)-derived extracellular matrix hydrogel (MeninGEL) is fabricated by employing a protocol that involves physical, chemical, and enzymatic processing of spinal meninges tissue and preserves the biochemical structure of meninges. The success of decellularization is characterized by measuring the contents of residual DNA, glycosaminoglycans, and hydroxyproline, while a proteomics analysis is applied to reveal the composition of MeninGEL. Frequency and temperature sweep rheometry show that dSCM forms self-supporting hydrogel at physiological temperature. The MeninGEL possesses excellent cytocompatibility. Moreover, it is evidenced with immuno/histochemistry and gene expression studies that the hydrogel induces growth-factor free differentiation of human mesenchymal stem cells into neural-lineage cells. Furthermore, MeninGEL instructs human umbilical vein endothelial cells to form vascular branching. With its innate bioactivity and low batch-to-batch variation property, the MeninGEL has the potential to be an off-the-shelf product in nerve tissue regeneration and restoration.

Evaluation of PC12 Cells' Proliferation, Adhesion and Migration with the Use of an Extracellular Matrix (CorMatrix) for Application in Neural Tissue Engineering

The use of extracellular matrix (ECM) biomaterials for soft tissue repair has proved extremely successful in animal models and in some clinical settings. The aim of the study was to investigate the effect of the commercially obtained CorMatrix bioscaffold on the viability, proliferation and migration of rat pheochromocytoma cell line PC12. PC12 cells were plated directly onto a CorMatrix flake or the well surface of a 12-well plate and cultured in RPMI-1640 medium and a medium supplemented with the nerve growth factor (NGF). The surface of the culture plates was modified with collagen type I (Col I). The number of PC12 cells was counted at four time points and then analysed for apoptosis using a staining kit containing annexin V conjugate with fluorescein and propidium iodide (PI). The effect of CorMatrix bioscaffold on the proliferation and migration of PC12 cells was tested by staining the cells with Hoechst 33258 solution for analysis using fluorescence microscopy. The research showed that the percentage of apoptotic and necrotic cells was low (less than 7%). CorMatrix stimulates the proliferation and possibly migration of PC12 cells that populate all levels of the three-dimensional architecture of the biomaterial. Further research on the mechanical and biochemical capabilities of CorMatrix offers prospects for the use of this material in neuro-regenerative applications.

Design Challenges in Polymeric Scaffolds for Tissue Engineering

Numerous surgical procedures are daily performed worldwide to replace and repair damaged tissue. Tissue engineering is the field devoted to the regeneration of damaged tissue through the incorporation of cells in biocompatible and biodegradable porous constructs, known as scaffolds. The scaffolds act as host biomaterials of the incubating cells, guiding their attachment, growth, differentiation, proliferation, phenotype, and migration for the development of new tissue. Furthermore, cellular behavior and fate are bound to the biodegradation of the scaffold during tissue generation. This article provides a critical appraisal of how key biomaterial scaffold parameters, such as structure architecture, biochemistry, mechanical behavior, and biodegradability, impart the needed morphological, structural, and biochemical cues for eliciting cell behavior in various tissue engineering applications. Particular emphasis is given on specific scaffold attributes pertaining to skin and brain tissue generation, where further progress is needed (skin) or the research is at a relatively primitive stage (brain), and the enumeration of some of the most important challenges regarding scaffold constructs for tissue engineering.

Microphysiological models of the central nervous system with fluid flow

There are over 1,000 described neurological and neurodegenerative disorders affecting nearly 100 million Americans - roughly one third of the U.S. population. Collectively, treatment of neurological conditions is estimated to cost $800 billion every year. Lowering this societal burden will require developing better model systems in which to study these diverse disorders. Microphysiological systems are promising tools for modeling healthy and diseased neural tissues to study mechanisms and treatment of neuropathology. One major benefit of microphysiological systems is the ability to incorporate biophysical forces, namely the forces derived from biological fluid flow. Fluid flow in the central nervous system (CNS) is a complex but important element of physiology, and pathologies as diverse as traumatic or ischemic injury, cancer, neurodegenerative disease, and natural aging have all been found to alter flow pathways. In this review, we summarize recent advances in three-dimensional microphysiological systems for studying the biology and therapy of CNS disorders and highlight the ability and growing need to incorporate biological fluid flow in these miniaturized model systems.

Biomaterials for Neural Tissue Engineering

The therapy of neural nerve injuries that involve the disruption of axonal pathways or axonal tracts has taken a new dimension with the development of tissue engineering techniques. When peripheral nerve injury (PNI), spinal cord injury (SCI), traumatic brain injury (TBI), or neurodegenerative disease occur, the intricate architecture undergoes alterations leading to growth inhibition and loss of guidance through large distance. To improve the limitations of purely cell-based therapies, the neural tissue engineering philosophy has emerged. Efforts are being made to produce an ideal scaffold based on synthetic and natural polymers that match the exact biological and mechanical properties of the tissue. Furthermore, through combining several components (biomaterials, cells, molecules), axonal regrowth is facilitated to obtain a functional recovery of the neural nerve diseases. The main objective of this review is to investigate the recent approaches and applications of neural tissue engineering approaches.

Decellularized Disc Hydrogels for hBMSCs tissue-specific differentiation and tissue regeneration

Tissue specificity, a key factor in the decellularized tissue matrix (DTM), has shown bioactive functionalities in tuning cell fate-e.g., the differentiation of mesenchymal stem cells. Notably, cell fate is also determined by the living microenvironment, including material composition and spatial characteristics. Herein, two neighboring tissues within intervertebral discs, the nucleus pulposus (NP) and annulus fibrosus (AF), were carefully processed into DTM hydrogels (abbreviated DNP-G and DAF-G, respectively) to determine the tissue-specific effects on stem cell fate, such as specific components and different culturing methods, as well as in vivo regeneration. Distinct differences in their protein compositions were identified by proteomic analysis. Interestingly, the fate of human bone marrow mesenchymal stem cells (hBMSCs) also responds to both culturing methods and composition. Generally, hBMSCs cultured with DNP-G (3D) differentiated into NP-like cells, while hBMSCs cultured with DAF-G (2D) underwent AF-like differentiation, indicating a close correlation with the native microenvironments of NP and AF cells, respectively. Furthermore, we found that the integrin-mediated RhoA/LATS/YAP1 signaling pathway was activated in DAF-G (2D)-induced AF-specific differentiation. Additionally, the activation of YAP1 determined the tendency of NP- or AF-specific differentiation and played opposite regulatory effects. Finally, DNP-G and DAF-G specifically promoted tissue regeneration in NP degeneration and AF defect rat models, respectively. In conclusion, DNP-G and DAF-G can specifically determine the fate of stem cells through the integrin-mediated RhoA/LATS/YAP1 signaling pathway, and this tissue specificity is both compositional and spatial, supporting the utilization of tissue-specific DTM in advanced treatments of intervertebral disc degeneration.

Decellularization of porcine whole lung to obtain a clinical-scale bioengineered scaffold

Whole-organ engineering is emerging as an alternative source for xenotransplantation in end-stage diseases. Utilization of decellularized whole lung scaffolds created by detergent perfusion is an effective strategy for organ replacement. In the current study, we attempted to decellularize porcine whole lungs to generate an optimal and reproducible decellularized matrix for future clinical use. Porcine whole lungs were decellularized via perfusion of various detergents (sodium dodecyl sulfate (SDS)/Triton X-100, sodium lauryl ether sulfate (SLES)/Triton X-100, dextrose/SDS/Triton X-100 and dextrose/SLES/Triton X-100) through the pulmonary artery and bronchus of the lung. The decellularized scaffolds were evaluated for decellularization efficiency, extracellular matrix (ECM) component preservation, xenoantigen removal and compatibility. The resulting lung scaffolds obtained from treatment with the dextrose/SLES/Triton X-100 cocktail showed minimal residual cellular components and xenoantigens, including DNA and protein, and good preservation of ECM composition. Evaluation of the porcine lung ECM by specific staining and immunofluorescence confirmed that the three-dimensional ultrastructure of the ECM was noticeably preserved in the SLES-treated groups. In addition, the decellularized lung scaffolds originating from the dextrose/SLES/Triton X-100 cocktail supported cell adhesion and growth. In summary, the novel detergent SLES alleviated the damage to retain a better-preserved ECM than SDS. Sequential Triton X-100 perfusion eliminated SLES. Moreover, performing dextrose perfusion in advance further protected scaffold components, especially collagen. We developed an optimal dextrose/SLES/Triton X-100 cocktail method that can be used for the decellularization of porcine whole lung to obtain a clinical-scale bioengineered scaffold.

Photooxidation crosslinking to recover residual stress in decellularized blood vessel

Decellularization method based on trypsin-digestion is widely used to construct small diameter vascular grafts. However, this method will reduce the opening angle of the blood vessel and result in the reduction of residual stress. Residual stress reduced has an adverse effect on the compliance and permeability of small diameter vascular grafts. To improve the situation, acellular blood vessels were treated with glutaraldehyde and photooxidation crosslinking respectively, and the changes of opening angle, circumferential residual strain of native blood vessels, decellularized arteries and crosslinked blood vessels were measured by means of histological examination, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) in this study. The opening angle of decellularized arteries significantly restored after photooxidation crosslinking (P = 0.0216), while that of glutaraldehyde crosslinking blood vessels reduced. The elastic fibers inside the blood vessels became densely rearranged after photooxidation crosslinking. The results of finite element simulation showed that the residual stress increased with the increase of opening angle. In this study, we found at the first time that photooxidation crosslinking method could significantly increase the residual stress of decellularized vessels, which provides biomechanical support for the development of new biomaterials of vascular grafts.

Sterilization and disinfection methods for decellularized matrix materials: Review, consideration and proposal

Sterilization is the process of killing all microorganisms, while disinfection is the process of killing or removing all kinds of pathogenic microorganisms except bacterial spores. Biomaterials involved in cell experiments, animal experiments, and clinical applications need to be in the aseptic state, but their physical and chemical properties as well as biological activities can be affected by sterilization or disinfection. Decellularized matrix (dECM) is the low immunogenicity material obtained by removing cells from tissues, which retains many inherent components in tissues such as proteins and proteoglycans. But there are few studies concerning the effects of sterilization or disinfection on dECM, and the systematic introduction of sterilization or disinfection for dECM is even less. Therefore, this review systematically introduces and analyzes the mechanism, advantages, disadvantages, and applications of various sterilization and disinfection methods, discusses the factors influencing the selection of sterilization and disinfection methods, summarizes the sterilization and disinfection methods for various common dECM, and finally proposes a graphical route for selecting an appropriate sterilization or disinfection method for dECM and a technical route for validating the selected method, so as to provide the reference and basis for choosing more appropriate sterilization or disinfection methods of various dECM.

•

Asepsis is the prerequisite for the experiment and application of biomaterials.

•

Sterilization or disinfection affects physic-chemical properties of biomaterials.

•

Mechanism, advantages and disadvantages of sterilization or disinfection methods.

•

Factors influencing the selection of sterilization or disinfection methods.

•

Selection of sterilization or disinfection methods for decellularized matrix.