Multilayer nanoparticles for sustained delivery of exenatide to treat type 2 diabetes mellitus

Fabrication and characterization of nanoparticles with lecithin liposomes and poloxamer micelles: Impact of conformational structures of poloxamers

In this study, we fabricated and characterized nanoparticles with a core/shell structure using lecithin and poloxamer. We also evaluated their ability to load proteins. At a lecithin/poloxamer ratio of 0.2, the sizes of lecithin/P188 (low molecular weight poloxamer) and lecithin/P338 (high molecular weight poloxamer) nanoparticles were 316.1 and 280.7 nm, respectively. Lecithin/P188 nanoparticles easily lost core/shell structure at pH 3 and 7. Lecithin/P338 nanoparticles were stable at pH 7 but unstable at pH 3. Only lecithin/P338 nanoparticles exhibited stability in response to temperature changes, despite an increase in their size with decreasing temperature. Loading a model protein with a high isoelectric point (pI) in liposome/poloxamer nanoparticles seemed impossible. A model protein with low pI was efficiently loaded in lecithin/poloxamer nanoparticles, and the maximum loading capacity of lecithin/P188 and lecithin/P338 nanoparticles was 14.85 and 42.34 mg/g particle, respectively. However, lecithin/P188 nanoparticles loading this model protein lost their core/shell structure.

Novel Approaches for the Management of Type 2 Diabetes Mellitus: An Update

Diabetes mellitus is an irreversible, chronic metabolic disorder indicated by hyperglycemia. It is now considered a worldwide pandemic. T2DM, a spectrum of diseases initially caused by tissue insulin resistance and slowly developing to a state characterized by absolute loss of secretory action of the β cells of the pancreas, is thought to be caused by reduced insulin secretion, resistance to tissue activities of insulin, or a combination of both. Insulin secretagogues, biguanides, insulin sensitizers, alpha-glucosidase inhibitors, incretin mimetics, amylin antagonists, and sodium-glucose co-transporter-2 (SGLT2) inhibitors are the main medications used to treat T2DM. Several of these medication's traditional dosage forms have some disadvantages, including frequent dosing, a brief half-life, and limited absorption. Hence, attempts have been made to develop new drug delivery systems for oral antidiabetics to ameliorate the difficulties associated with conventional dosage forms. In comparison to traditional treatments, this review examines the utilization of various innovative therapies (such as microparticles, nanoparticles, liposomes, niosomes, phytosomes, and transdermal drug delivery systems) to improve the distribution of various oral hypoglycemic medications. In this review, we have also discussed some new promising candidates that have been approved recently by the US Food and Drug Administration for the treatment of T2DM, like semaglutide, tirzepatide, and ertugliflozin. They are used as a single therapy and also as combination therapy with drugs like metformin and sitagliptin.

A review of recent research and development on GLP-1 receptor agonists-sustained-release microspheres

Glucagon-like peptide-1 receptor agonists (GLP-1 RAs) are increasingly used in treating type 2 diabetes (T2D). However, owing to their limited oral bioavailability, most commercially available GLP-1 RAs are administered through frequent subcutaneous injections, which may result in poor patient compliance during clinical treatment. To improve patients' compliance, sustained-release GLP-1 RA-loaded microspheres have been explored. This review is an overview of recent progress and research in GLP-1 RA-loaded microspheres. First, the fabrication methods of GLP-1 RA-loaded microspheres including the coacervation method, emulsion-solvent evaporation method based on agitation, premix membrane emulsification technology, spray drying, microfluidic droplet technology, and supercritical fluid technology are summarized. Next, the strategies for maintaining GLP-1 RAs' stability and activity in microspheres by adding additives and PEGylation are reviewed. Finally, the effect of particle size, drug distribution, the internal structure of microspheres, and the hydrogel/microsphere composite strategy on improved release behavior is summarized.

The insulin long-acting chitosan - Polyethyleneimine nanoparticles to treat the type 2 diabetes mellitus and prevent the associated complications

Type 2 diabetes mellitus (T2DM) is a complex metabolic disorder, which is ultimately treated by the insulin (INS). However, the subcutaneous (s. c.) injection of insulin solution faces the problems of pain and unsatisfactory patient compliance. In this study, the long-acting formulations of insulin are propsed to treat the T2DM and prevent the associated complications. The chitosan (CS) and/or branched polyethyleneimine (bPEI) nanoparticles (bPEI-INS NPs, CS-bPEI-INS NPs) were constructed to load insulin. The long -acting nanoparticles successfully achieved the sustained release of the INS in vitro and in vivo. After s. c. administration, the CS-bPEI-INS NPs greatly improved the INS bioavailability. As a result, the CS-bPEI-INS NPs produced sustained glucose-lowering effects, promising short-term and long-term hypoglycemic efficacy in the T2DM model. Furthermore, the treatment of the CS-bPEI-INS NPs greatly protected the islet in the pancreas and prevented the associated complications of the T2DM, such as cardiac fibrosis in the myocardial interstitium and the perivascular area. In a word, the CS-bPEI-INS NPs was an encouraging long-acting formulation of insulin and had great potential in the treatment of T2DM.

Sustained release of GLP-1 analog from γ-PGA-PAE copolymers for management of type 2 diabetes

GLP-1 has been clinically exploited for treating type 2 diabetes, while its short circulation half-life requires multiple daily injections to maintain effective glycemic control, thus limiting its widespread application. Here we developed a drug delivery system based on self-assembling polymer-amino acid conjugates (γ-PGA-PAE) to provide sustained release of GLP-1 analog (DLG3312). The DLG3312 loaded γ-PGA based nanoparticles (DLG3312@NPs) exhibited a spherical shape with a good monodispersity under transmission electron microscope (TEM) observation. The DLG3312 encapsulation was optimized, and the loading efficiency was as high as 78.4 ± 2.2 %. The transformation of DLG3312@NPs to network structures was observed upon treatment with the fresh serum, resulting in a sustained drug release. The in vivo long-term hypoglycemic assays indicated that DLG3312@NPs significantly reduced blood glucose and glycosylated hemoglobin level. Furthermore, DLG3312@NPs extended the efficacy of DLG3312, leading to a decrease in the dosing schedule that from once a day to once every other day. This approach combined the molecular and materials engineering strategies that offered a unique solution to maximize the availability of anti-diabetic drug and minimize its burdens to type 2 diabetic patients.

Engineering of smart nanoconstructs for delivery of glucagon-like peptide-1 analogs

Glucagon-like peptide-1 (GLP-1) receptor agonists are being increasingly exploited in clinical practice for management of type 2 diabetes mellitus due to their ability to lower blood glucose levels and reduce off-target effects of current therapeutics. Nanomaterials had viewed myriad breakthroughs in protecting peptides against degradation and carrying therapeutics to targeted sites for maximizing their pharmacological activity and overcoming limitations associated with their application. This review highlights the latest advances in designing smart multifunctional nanoconstructs and engineering targeted and stimuli-responsive nanoassemblies for delivery of GLP-1 receptor agonists. Furthermore, advanced nanoconstructs of sophisticated supramolecular assembly yet efficient delivery of GLP-1/GLP-1 analogs, nanodevices that mediate intrinsic GLP-1 secretion per se, and nanomaterials with capabilities to load additional moieties for synergistic antidiabetic effects, are demonstrated.

Nanomedicine for the SARS-CoV-2: State-of-the-Art and Future Prospects

The newly emerged ribonucleic acid (RNA) enveloped human beta-coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection caused the COVID-19 pandemic, severely affects the respiratory system, and may lead to death. Lacking effective diagnostics and therapies made this pandemic challenging to manage since the SARS-CoV-2 transmits via human-to-human, enters via ACE2 and TMPSSR2 receptors, and damages organs rich in host cells, spreads via symptomatic carriers and is prominent in an immune-compromised population. New SARS-CoV-2 informatics (structure, strains, like-cycles, functional sites) motivated bio-pharma experts to investigate novel therapeutic agents that act to recognize, inhibit, and knockdown combinations of drugs, vaccines, and antibodies, have been optimized to manage COVID-19. However, successful targeted delivery of these agents to avoid off-targeting and unnecessary drug ingestion is very challenging. To overcome these obstacles, this mini-review projects nanomedicine technology, a pharmacologically relevant cargo of size within 10 to 200 nm, for site-specific delivery of a therapeutic agent to recognize and eradicate the SARS-CoV-2, and improving the human immune system. Such combinational therapy based on compartmentalization controls the delivery and releases of a drug optimized based on patient genomic profile and medical history. Nanotechnology could help combat COVID-19 via various methods such as avoiding viral contamination and spraying by developing personal protective equipment (PPE) to increase the protection of healthcare workers and produce effective antiviral disinfectants surface coatings capable of inactivating and preventing the virus from spreading. To quickly recognize the infection or immunological response, design highly accurate and sensitive nano-based sensors. Development of new drugs with improved activity, reduced toxicity, and sustained release to the lungs, as well as tissue targets; and development of nano-based immunizations to improve humoral and cellular immune responses. The desired and controlled features of suggested personalized therapeutics, nanomedicine, is a potential therapy to manage COVID-19 successfully. The state-of-the-art nanomedicine, challenges, and prospects of nanomedicine are carefully and critically discussed in this report, which may serve as a key platform for scholars to investigate the role of nanomedicine for higher efficacy to manage the COVID-19 pandemic.

Comparison of ELISA and HPLC-MS methods for the determination of exenatide in biological and biotechnology-based formulation matrices

The development of biotechnology-based active pharmaceutical ingredients, such as GLP-1 analogs, brought changes in type 2 diabetes treatment options. For better therapeutic efficiency, these active pharmaceutical ingredients require appropriate administration, without the development of adverse effects or toxicity. Therefore, it is required to develop several quantification methods for GLP-1 analogs products, in order to achieve the therapeutic goals, among which ELISA and HPLC arise. These methods are developed, optimized and validated in order to determine GLP-1 analogs, not only in final formulation of the active pharmaceutical ingredient, but also during preclinical and clinical trials assessment. This review highlights the role of ELISA and HPLC methods that have been used during the assessment for GLP-1 analogs, especially for exenatide.

Development of composite PLGA microspheres containing exenatide-encapsulated lecithin nanoparticles for sustained drug release

•

PLGA microspheres based on exenatide encapsulated in nanoparticles were developed.

•

Ex-NPs-PLGA-Ms was prepared by modified S/O/W method with a low initial burst.

•

Ex-NPs-PLGA-Ms achieved zero-order controlled release.

•

S/O/W method could preserve the bioactivity of exenatide without cytotoxicity.

This study aimed to prepare poly (D, L-lactic-co-glycolic acid) microspheres (PLGA-Ms) by a modified solid-in-oil-in-water (S/O/W) multi-emulsion technique in order to achieve sustained release with reduced initial burst and maintain efficient drug concentration for a prolonged period of time. Composite PLGA microspheres containing exenatide-encapsulated lecithin nanoparticles (Ex-NPs-PLGA-Ms) were obtained by initial fabrication of exenatide-loaded lecithin nanoparticles (Ex-NPs) via the alcohol injection method, followed by encapsulation of Ex-NPs into PLGA microspheres. Compared to Ms prepared by the conventional water-in-oil-in-water (W/O/W) technique (Ex-PLGA-Ms), Ex-NPs-PLGA-Ms showed a more uniform particle size distribution, reduced initial burst release, and sustained release for over 60 d in vitro. Cytotoxicity studies showed that Ms prepared by both techniques had superior biocompatibility without causing any detectable cytotoxicity. In pharmacokinetic studies, the effective drug concentration was maintained for over 30 d following a single subcutaneous injection of two types of Ms formulation in rats, potentially prolonging the therapeutic action of Ex. In addition, administration of Ex-NPs-PLGA-Ms resulted in a more smooth plasma concentration-time profile with a higher area under the curve (AUC) compared to that of Ex-PLGA-Ms. Overall, Ex-NPs-PLGA-Ms prepared by the novel S/O/W method could be a promising sustained drug release system with reduced initial burst release and prolonged therapeutic efficacy.

Formation Mechanism, In vitro and In vivo Evaluation of Dimpled Exenatide Loaded PLGA Microparticles Prepared by Ultra-Fine Particle Processing System

Spherical poly (D, L-lactic-co-glycolic acid) microparticles (PLGA-MPs) have long been investigated in order to achieve sustained delivery of proteins/peptides. However, the formation mechanism and release characteristics of the specific shape MPs were still unknown. This study aimed to develop a novel-dimpled exenatide-loaded PLGA-MPs (Exe-PLGA-MPs) using an ultra-fine particle processing system (UPPS) and investigate the formation mechanism and release characteristics. Exe-PLGA-MPs were prepared by UPPS and optimized based on their initial burst within the first 24 h and drug release profiles. Physicochemical properties of Exe-PLGA-MPs, including morphology, particle size, and structural integrity of Exe extracted from Exe-PLGA-MPs, were evaluated. Furthermore, pharmacokinetic studies of the optimal formulation were conducted in Sprague-Dawley (SD) rats to establish in vitro-in vivo correlations (IVIVC) of drug release. Exe-PLGA-MPs with dimpled shapes and uniform particle sizes achieved a high encapsulation efficiency (EE%, 91.50 ± 2.65%) and sustained drug release for 2 months in vitro with reduced initial burst (20.42 ± 1.64%). Moreover, the pharmacokinetic studies revealed that effective drug concentration could be maintained for 3 weeks following a single injection of dimpled Exe-PLGA-MPs with high IVIVC. Dimpled PLGA-MPs prepared using the UPPS technique could thus have great potential for sustained delivery of macromolecular proteins/peptides.

Nanoparticulate-based drug delivery systems for small molecule anti-diabetic drugs: An emerging paradigm for effective therapy

Emergence of nanoparticulate drug delivery systems in diabetes has facilitated improved delivery of small molecule drugs which could dramatically improve the quality of life for diabetics. Conventional dosage forms of the anti-diabetic drugs exhibit variable/less bioavailability and short half-life, demanding frequent dosing and causing increased side-effects resulting in ineffectiveness of therapy and non-compliance with the patients. Considering the chronic nature of diabetes, nanotechnology-based approaches are more promising in terms of providing site-specific delivery of drugs with higher bioavailability and reduced dosage regimen. Nanomedicines act at the cellular and molecular levels to enhance the uptake of the drug into the cells or block the efflux mechanisms thus retaining the drug inside the cell for a longer duration of time. Many studies have hinted at the possibility of administering peptide drugs like glucagon like peptides orally by encapsulation into nanoparticles. Nanoparticles also allow further modifications including their encapsulation into microparticles, polyethylene glycol (PEG)-PEGylation- or functionalization with ligands for active targeting. Nevertheless, such remarkable benefits are fraught with their long-term safety concerns, regulatory hurdles, limitations of scale-up and ineffective patent protection which have hindered their commercialization. This review summarizes the latest advances in the area of nanoformulations as applied to the delivery of anti-diabetics. STATEMENT OF SIGNIFICANCE: The present work describes the latest advancements in the area of nanoformulations for anti-diabetic therapy along with highlighting the advantages that these nanoformulations offer at molecular level for diabetes. Although several potent orally active anti-hyperglycemic agents are available, the current challenges in efficient management of diabetes include optimization of the present therapies to ensure an optimum and stable level of glucose, and also to reduce the occurrence of long term complications associated with diabetes. Nanoformulations because of their high surface area to volume ratio provide improved efficacy, targeting their delivery to the desired site of action tends to minimize adverse effects and administration of peptide drugs by oral route is also possible by encapsulating them in nanoparticles. As we reflect on the success and failures of latest research on nanoformulations for the treatment of diabetes, it is important not to dwell on lack of FDA approvals but rather define future directions that guarantee more effective anti-diabetic treatment. In proposed review we have explored the latest advancement in anti-diabetic nanotechnology based formulations.

An intestinal paracellular pathway biased toward positively-charged macromolecules

Lacking an effective mechanism to safely and consistently enhance macromolecular uptake across the intestinal epithelium, prospects for successful development of oral therapeutic peptide drugs remain unlikely. We previously addressed this challenge by identifying an endogenous mechanism that controls intestinal paracellular permeability that can be activated by a peptide, termed PIP 640, which can increase cellular levels of phosphorylated myosin light chain at position S¹⁹ (MLC-pS¹⁹). Apical application in vitro or luminal application in vivo was shown to increase macromolecular solute transport within minutes that recovered completely within a few hours after removal. We now examine the nature of PIP 640-mediated permeability changes. Confluent Caco-2 cell monolayers treated with PIP 640 enhanced apical-to-basolateral (AB) transport of 4-kDa, but not 10-kDa, dextran. Expression and/or cellular distribution changes of tight junction (TJ) proteins were restricted to increased claudin-2 over a time course that correlated with an apparent shift in its distribution from the nucleus to the membrane fraction of the cell. PIP 640-mediated epithelial changes were distinct from the combined actions of the pro-inflammatory cytokines tumor necrosis factor alpha (TNF-α) and interferon gamma (IFN-γ). While TNF-α/IFN-γ treatment also increased MLC-pS¹⁹ levels, these cytokines enhanced AB transport for 70-kDa dextran and decreased occludin expression at TJs. Claudin-2-dependent changes induced by PIP 640 resulted in an AB transport bias for positively-charged macromolecules demonstrated in vitro using charge variants of 4-kDa dextrans and by comparing transport of salmon calcitonin to exenatide. Comparable outcomes of increased TJ localization of claudin-2 and enhanced transport of these therapeutic peptides that biased toward cationic characteristics was demonstrated in vivo following after intra-luminal injection into rat jejunum. Together, these data have shown a potential mechanism for PIP 640 to enhance paracellular permeability of solutes in the size range of small therapeutic peptides that is biased toward positively-charged solutes.

Multiseed liposomal drug delivery system using micelle gradient as driving force to improve amphiphilic drug retention and its anti-tumor efficacy

To improve drug retention in carriers for amphiphilic asulacrine (ASL), a novel active loading method using micelle gradient was developed to fabricate the ASL-loaded multiseed liposomes (ASL-ML). The empty ML were prepared by hydrating a thin film with empty micelles. Then the micelles in liposomal compartment acting as ‘micelle pool’ drove the drug to be loaded after the outer micelles were removed. Some reasoning studies including critical micelle concentration (CMC) determination, influencing factors tests on entrapment efficiency (EE), structure visualization, and drug release were carried out to explore the mechanism of active loading, ASL location, and the structure of ASL-ML. Comparisons were made between pre-loading and active loading method. Finally, the extended drug retention capacity of ML was evaluated through pharmacokinetic, drug tissue irritancy, and in vivo anti-tumor activity studies. Comprehensive results from fluorescent and transmission electron microscope (TEM) observation, encapsulation efficiency (EE) comparison, and release studies demonstrated the formation of ML-shell structure for ASL-ML without inter-carrier fusion. The location of drug mainly in inner micelles as well as the superiority of post-loading to the pre-loading method , in which drug in micelles shifted onto the bilayer membrane was an additional positive of this delivery system. It was observed that the drug amphiphilicity and interaction of micelles with drug were the two prerequisites for this active loading method. The extended retention capacity of ML has been verified through the prolonged half-life, reduced paw-lick responses in rats, and enhanced tumor inhibition in model mice. In conclusion, ASL-ML prepared by active loading method can effectively load drug into micelles with expected structure and improve drug retention.

Improving long-term subcutaneous drug delivery by regulating material-bioenvironment interaction

Subcutaneous long-acting release (LAR) formulations have been extensively developed in the clinic to increase patient compliance and reduce treatment cost. Despite preliminary success for some LAR systems, a major obstacle limiting the therapeutic effect remains on their interaction with surrounding tissues. In this review, we summarize how living bodies respond to injected or implanted materials, and highlight some typical strategies based on smart material design, which may significantly improve long-term subcutaneous drug delivery. Moreover, possible strategies to achieve ultra-long (months, years) subcutaneous drug delivery systems are proposed. Based on these discussions, we believe the well-designed subcutaneous long-acting formulations will hold great promise to improve patient quality of life in the clinic.

Progesterone PLGA/mPEG-PLGA Hybrid Nanoparticle Sustained-Release System by Intramuscular Injection

PURPOSE

To prepare sustained-release PLGA/mPEG-PLGA hybrid nanoparticles of progesterone (PRG), and evaluate the descending required administration dosage in vivo.

METHODS

PRG hybrid nanoparticles (PRG H-NPs) based on PLGA/mPEG-PLGA were compared with PRG nanoparticles (PRG-NPs) of pure PLGA as the matrix and PRG-oil solutions. Nanoparticles (NPs) were formed by the method of nanoemulsion, and the pharmacokinetics of the sustained-release PRG H-NPs in male Sprague dawley (SD) rats were investigated. The rats were randomly divided into four groups, each group received: single dose of PRG H-NPs (14.58 mg/kg, i.m.) and PRG-NPs (14.58 mg/kg, i.m.), repeated dosing for 7 days of PRG-oil (2.08 mg/kg, i.m.) solution (Oil-L) and a higher dosage of PRG-oil (6.24 mg/kg, i.m.) solution (Oil-H), respectively.

RESULTS

In the pharmacokinetic test, the PRG H-NPs exhibited a comparatively good sustained-release effect against the PRG-NPs without mPEG-PLGA and PRG-oil solution. The pharmacokinetic parameters of the PRG H-NPs, PRG-NPs, Oil-L and Oil-H were AUC_0-t(ng·h·mL^-1) 8762.1, 1546.1, 1914.5, and 12,138.9, t_1/2 (h)52.7, 44.1, 8.4 and 44.6 respectively.

CONCLUSIONS

Owing to the modification of PEG, PRG H-NPs can act as safe delivery platforms for sustained-release of drugs with a lower dosage required.

Microneedle-array patches loaded with dual mineralized protein/peptide particles for type 2 diabetes therapy

The delivery of therapeutic peptides for diabetes therapy is compromised by short half-lives of drugs with the consequent need for multiple daily injections that reduce patient compliance and increase treatment cost. In this study, we demonstrate a smart exendin-4 (Ex4) delivery device based on microneedle (MN)-array patches integrated with dual mineralized particles separately containing Ex4 and glucose oxidase (GOx). The dual mineralized particle-based system can specifically release Ex4 while immobilizing GOx as a result of the differential response to the microenvironment induced by biological stimuli. In this manner, the system enables glucose-responsive and closed-loop release to significantly improve Ex4 therapeutic performance. Moreover, integration of mineralized particles can enhance the mechanical strength of alginate-based MN by crosslinking to facilitate skin penetration, thus supporting painless and non-invasive transdermal administration. We believe this smart glucose-responsive Ex4 delivery holds great promise for type 2 diabetes therapy by providing safe, long-term, and on-demand Ex4 therapy.

Diabetes treatments often rely on frequent and scheduled drug administration, which reduces patient compliance and increases treatment cost. Here, the authors develop a microneedle-array patch that separately loads drug-releasing module and glucose-sensing element for on-demand, long-term diabetes therapy.

Long-Acting Release Formulation of Exendin-4 Based on Biomimetic Mineralization for Type 2 Diabetes Therapy

Exendin-4 has been clinically exploited for treating type 2 diabetes, but the short circulation half-life and multiple daily injections limit its widespread application with respect to poor patient compliance, low efficacy, and high treatment cost. In this study, a potent long-acting release system based on biomimetic mineralization was constructed for biocompatible and sustained exendin-4 delivery. Similar to natural biomineralization, exendin-4 can be mineralized to form nanosized mineral solids by means of the reaction between acidic amino acid residues and calcium ions in a supersaturated environment with negligible influence on peptide bioactivity. Mineralized exendin-4 particles may be spontaneously absorbed by a living body under physiologically supersaturated conditions, resulting in gradual dissociation and sustained drug release. In such a way, the glucose level of diabetic mice may be effectively controlled for a long period of time by mineralized exendin-4 without obvious side effects. We believe this biomimetic formulation can serve as a promising candidate for future clinical applications for type 2 diabetes therapies.

Microcosmic mechanism of dication for inhibiting acylation of acidic Peptide

PURPOSE

For long-effective peptide formulation based on poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres, acylation often leads to peptide instability during its release and reduced drug efficacy. Among the reported solving strategies, adding dication such as Ca(2+) and Mn(2+) in the formulation was the most convenient method for inhibiting basic peptide acylation. However, the strategies for the acidic peptide still remain unexplored, possibly due to the peptide's changeable charge state in acid environment within degraded PLGA microspheres. Moreover, the previous studies mainly focusing on the macroscopical adsorption of peptide to PLGA cannot demonstrate the inhibition mechanism.

METHODS

Acylation inhibition for acidic peptide (exenatide) by dications (Ca(2+), Mn(2+) and Zn(2+)) was studied for the first time, and Quartz Crystal Microbalance with Dissipation (QCM-D) was innovatively employed to analyze microcosmic mechanism of the inhibition.

RESULTS

These dications played different roles in acylation inhibition of acidic peptide. The effects of dications on acylation outside or inside PLGA microspheres indicated that Ca(2+) did not work, Mn(2+) played a weak role, and Zn(2+) possessed the greatest inhibition.

CONCLUSIONS

Zn(2+) was the most effective dication for the acylation inhibition because of the complex formation and its steric-hindrance effect, which was a new function for this dication.

Novel drug delivery system: an immense hope for diabetics

CONTEXT

Existing medication systems for the treatment of diabetes mellitus (DM) are inconvenient and troublesome for effective and safe delivery of drugs to the specific site. Therefore, investigations are desired to deliver antidiabetics using novel delivery approaches followed by their commercialization.

OBJECTIVE

The present review aims to provide a compilation on the latest development in the field of novel drug delivery systems (NDDSs) for antidiabetics with special emphasis on particulate, vesicular and miscellaneous systems.

METHODS

Review of literature (restricted to English language only) was done using electronic databases like Pubmed® and Scirus, i.e. published during 2005-2013. The CIMS/MIMS India Medical Drug Information eBook was used regarding available marketed formulation of antidiabetic drugs. Keywords used were "nanoparticle", "microparticle", "liposomes", "niosomes", "transdermal systems", "insulin", "antidiabetic drugs" and "novel drug delivery systems". Single inclusion was made for one article. If in vivo study was not done then article was seldom included in the manuscript.

RESULTS

The curiosity to develop NDDSs of antidiabetic drugs with special attention to the nanoparticulate system followed by microparticulate and lipid-based system is found to emerge gradually to overcome the problems associated with the conventional dosage forms and to win the confidence of end users towards the higher acceptability.

CONCLUSION

In the current scientific panorama when the area of novel drug delivery system has been recognized for its palpable benefits, unique potential of providing physical stability, sustained and site-specific drug delivery for a scheduled period of time can open new vistas for precise, safe and quality treatment of DM.