Evaluation of the osteoinductive potential of a bio-inspired scaffold mimicking the osteogenic niche for bone augmentation

Design, clinical applications and post-surgical assessment of bioresorbable 3D-printed craniofacial composite implants

This study details the design, fabrication, clinical trials' evaluation, and analysis after the clinical application of 3D-printed bone reconstruction implants made of nHAp@PLDLLA [nanohydroxyapatite@poly(L-lactide-co-D,L-lactide)] biomaterial. The 3D-printed formulations have been tested as bone reconstruction Cranioimplants in 3 different medical cases, including frontal lobe, mandibular bone, and cleft palate reconstructions. Replacing one of the implants after 6 months provided a unique opportunity to evaluate the post-surgical implant obtained from a human patient. This allowed us to quantify physicochemical changes and develop a spatial map of osseointegration and material degradation kinetics as a function of specific locations. To the best of our knowledge, hydrolytic degradation and variability in the physicochemical and mechanical properties of the biomimetic, 3D-printed implants have not been quantified in the literature after permanent placement in the human body. Such analysis has revealed the constantly changing properties of the implant, which should be considered to optimize the design of patient-specific bone substitutes. Moreover, it has been proven that the obtained composition can produce biomimetic, bioresorbable and bone-forming alloplastic substitutes tailored to each patient, allowing for shorter surgery times and faster patient recovery than currently available methods.

Novel artificial tricalcium phosphate and magnesium composite graft facilitates angiogenesis in bone healing

BACKGROUND

Bone grafting is the standard treatment for critical bone defects, but autologous grafts have limitations like donor site morbidity and limited availability, while commercial artificial grafts may have poor integration with surrounding bone tissue, leading to delayed healing. Magnesium deficiency negatively impacts angiogenesis and bone repair. Therefore, incorporating magnesium into a synthetic biomaterial could provide an excellent bone substitute. This study aims to evaluate the morphological, mechanical, and biological properties of a calcium phosphate cement (CPC) sponge composed of tetracalcium phosphate (TTCP) and monocalcium phosphate monohydrate (MCPM), which could serve as an excellent bone substitute by incorporating magnesium.

METHODS

This study aims to develop biomedical materials composed mainly of TTCP and MCPM powder, magnesium powder, and collagen. The materials were prepared using a wet-stirred mill and freeze-dryer methods. The particle size, composition, and microstructure of the materials were investigated. Finally, the biological properties of these materials, including 3-(4,5-dimethylthiazol-2-yl)-2,5- diphenyltetrazolium bromide (MTT) assay for biocompatibility, effects on bone cell differentiation by alkaline phosphatase (ALP) activity assay and tartrate-resistant acid phosphatase (TRAP) activity assay, and endothelial cell tube formation assay for angiogenesis, were evaluated as well.

RESULTS

The data showed that the sub-micron CPC powder, composed of TTCP/MCPM in a 3.5:1 ratio, had a setting time shorter than 15 minutes and a compressive strength of 4.39±0.96 MPa. This reveals that the sub-micron CPC powder had an adequate setting time and mechanical strength. We found that the sub-micron CPC sponge containing magnesium had better biocompatibility, including increased proliferation and osteogenic induction effects without cytotoxicity. The CPC sponge containing magnesium also promoted angiogenesis.

CONCLUSION

In summary, we introduced a novel CPC sponge, which had a similar property to human bone promoted the biological functions of bone cells, and could serve as a promising material used in bone regeneration for critical bone defects.

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

A Mechanistic and Preclinical Assessment of BioRestore Bioactive Glass as a Synthetic Bone Graft Extender and Substitute for Osteoinduction and Spine Fusion

STUDY DESIGN

Preclinical animal study.

OBJECTIVE

Evaluate the osteoinductivity and bone regenerative capacity of BioRestore bioactive glass.

SUMMARY OF BACKGROUND DATA

BioRestore is a Food and Drug Administration (FDA)-approved bone void filler that has not yet been evaluated as a bone graft extender or substitute for spine fusion.

METHODS

In vitro and in vivo methods were used to compare BioRestore with other biomaterials for the capacity to promote osteodifferentiation and spinal fusion. The materials evaluated (1) absorbable collagen sponge (ACS), (2) allograft, (3) BioRestore, (4) Human Demineralized Bone Matrix (DBM), and (5) MasterGraft. For in vitro studies, rat bone marrow-derived stem cells (BMSC) were cultured on the materials in either standard or osteogenic media (SM, OM), followed by quantification of osteogenic marker genes (Runx2, Osx, Alpl, Bglap, Spp1) and alkaline phosphatase (ALP) activity. Sixty female Fischer rats underwent L4-5 posterolateral fusion (PLF) with placement of 1 of 5 implants: (1) ICBG from syngeneic rats; (2) ICBG+BioRestore; (3) BioRestore alone; (4) ICBG+Allograft; or (5) ICBG+MasterGraft. Spines were harvested 8 weeks postoperatively and evaluated for bone formation and fusion via radiography, blinded manual palpation, microCT, and histology.

RESULTS

After culture for 1 week, BioRestore promoted similar expression levels of Runx2 and Osx to cells grown on DBM. At the 2-week timepoint, the relative ALP activity for BioRestore-OM was significantly higher (P<0.001) than that of ACS-OM and DBM-OM (P<0.01) and statistically equivalent to cells grown on allograft-OM. In vivo, radiographic and microCT evaluation showed some degree of bridging bone formation in all groups tested, with the exception of BioRestore alone, which did not produce successful fusions.

CONCLUSIONS

This study demonstrates the capacity of BioRestore to promote osteoinductivity in vitro. In vivo, BioRestore performed similarly to commercially available bone graft extender materials but was incapable of producing fusion as a bone graft substitute.

LEVEL OF EVIDENCE

Level V.

Systemic Cisplatin Does Not Affect the Bone Regeneration Process in a Critical Size Defect Murine Model

Osteosarcoma (OS) is the most common primary malignant bone tumor, and the current standard of care for OS includes neoadjuvant chemotherapy, followed by an R0 surgical resection of the primary tumor, and then postsurgical adjuvant chemotherapy. Bone reconstruction following OS resection is particularly challenging due to the size of the bone voids and because patients are treated with adjuvant and neoadjuvant systemic chemotherapy, which theoretically could impact bone formation. We hypothesized that an osteogenic material could be used in order to induce bone regeneration when adjuvant or neoadjuvant chemotherapy is given. We utilized a biomimetic, biodegradable magnesium-doped hydroxyapatite/type I collagen composite material (MHA/Coll) to promote bone regeneration in the presence of systemic chemotherapy in a murine critical size defect model. We found that in the presence of neoadjuvant or adjuvant chemotherapy, MHA/Coll is able to enhance and increase bone formation in a murine critical size defect model (11.16 ± 2.55 or 13.80 ± 3.18 versus 8.70 ± 0.81 mm3) for pre-op cisplatin + MHA/Coll (p-value = 0.1639) and MHA/Coll + post-op cisplatin (p-value = 0.1538), respectively, at 12 weeks. These findings indicate that neoadjuvant and adjuvant chemotherapy will not affect the ability of a biomimetic scaffold to regenerate bone to repair bone voids in OS patients. This preliminary data demonstrates that bone regeneration can occur in the presence of chemotherapy, suggesting that there may not be a necessity to modify the current standard of care concerning neoadjuvant and adjuvant chemotherapy for the treatment of metastatic sites or micrometastases.

Histomorphometric evaluation, SEM, and synchrotron analysis of the biological response of biodegradable and ceramic hydroxyapatite-based grafts: from the synthesis to the bed application

This study aimed to analyze the physicochemical and histological properties of nanostructured hydroxyapatite and alginate composites produced at different temperatures with and without sintering and implanted in rabbit tibiae. Hydroxyapatite-alginate (HA) microspheres (425-600 µm) produced at 90 and 5 °C without (HA90 and HA5) or with sintering at 1000 °C (HA90S and HA5S) were characterized and applied to evaluate thein vitrodegradation; also were implanted in bone defects on rabbit's tibiae (n= 12). The animals were randomly divided into five groups (blood clot, HA90S, HA5S, HA90, and HA5) and euthanized after 7 and 28 d. X-ray diffraction and Fourier-transform infrared analysis of the non-sintered biomaterials showed a lower crystallinity than sintered materials, being more degradablein vitroandin vivo. However, the sinterization of HA5 led to the apatite phase's decomposition into tricalcium phosphate. Histomorphometric analysis showed the highest (p< 0.01) bone density in the blood clot group, similar bone levels among HA90S, HA90, and HA5, and significantly less bone in the HA5S. HA90 and HA5 groups presented higher degradation and homogeneous distribution of the new bone formation onto the surface of biomaterial fragments, compared to HA90S, presenting bone only around intact microspheres (p< 0.01). The elemental distribution (scanning electron microscope and energy dispersive spectroscopy andμXRF-SR analysis) of Ca, P, and Zn in the newly formed bone is similar to the cortical bone, indicating bone maturity at 28 d. The synthesized biomaterials are biocompatible and osteoconductive. The heat treatment directly influenced the material's behavior, where non-sintered HA90 and HA5 showed higher degradation, allowing a better distribution of the new bone onto the surface of the biomaterial fragments compared to HA90S presenting the same level of new bone, but only on the surface of the intact microspheres, potentially reducing the bone-biomaterial interface.

External fixator-assisted plating osteosynthesis in a rabbit model of femoral bone defects appears to be a feasible and reproducible surgical technique: preliminary insights from a bone substitute study

PURPOSE

The aims of this study were to assess the complications associated with the use of an external fixator-assisted plate osteosynthesis technique to stabilize a femoral bone defect in a rabbit model and to evaluate if this technique could avoid the mispositioning and the displacement of the femoral fragments during the surgical procedure.

METHODS

A preliminary cadaveric animal study was conducted to develop a new technique of external fixator-assisted plating. Thirty rabbits underwent a surgical procedure consisting in the creation of a femoral bone defect and, subsequently an implantation of a bone substitute through the assistance of a temporary external fixator. The fixator's ability to maintain length and alignment during surgery was documented. All intraoperative complications were prospectively collected.

RESULTS

No complications related to the use of the temporary external fixator were reported. The technique successfully prevented mispositioning and dislocation during plating in all the rabbits.

CONCLUSION

In a rabbit animal model, the use of an external fixator-assisted plate osteosynthesis technique appears to be feasible and effective in avoiding misposition and rotation of femoral fragments when performing osteotomy and plating to create a mid-diaphyseal femoral defect.

Functionalization of biomimetic mineralized collagen for bone tissue engineering

Mineralized collagen (MC) is the basic unit of bone structure and function and is the main component of the extracellular matrix (ECM) in bone tissue. In the biomimetic method, MC with different nanostructures of neo-bone have been constructed. Among these, extra-fibrous MC has been approved by regulatory agencies and applied in clinical practice to play an active role in bone defect repair. However, in the complex microenvironment of bone defects, such as in blood supply disorders and infections, MC is unable to effectively perform its pro-osteogenic activities and needs to be functionalized to include osteogenesis and the enhancement of angiogenesis, anti-infection, and immunomodulation. This article aimed to discuss the preparation and biological performance of MC with different nanostructures in detail, and summarize its functionalization strategy. Then we describe the recent advances in the osteo-inductive properties and multifunctional coordination of MC. Finally, the latest research progress of functionalized biomimetic MC, along with the development challenges and future trends, are discussed. This paper provides a theoretical basis and advanced design philosophy for bone tissue engineering in different bone microenvironments.

Bone defect filling with a novel rattan-wood based not-sintered hydroxyapatite and beta-tricalcium phosphate material (b.Bone™) after tricortical bone graft harvesting - A consecutive clinical case series of 9 patients

Harvesting of tricortical bone graft from the iliac crest is an integral part of bone defect reconstruction in orthopaedic surgery. There are several options for filling the iliac crest defect area to avoid hematoma, pain, hernias and cosmetic issues, including different gelatin-based and other alternative biomaterials. Recently, a novel rattan-wood based not-sintered hydroxyapatite and beta-tricalcium phosphate material (b.Bone™, GreenBone ORTHO S.p.A Faenza, Italy) was shown to promote bone healing in an experimental setting. The goal of the current work is to report clinical and radiographical outcomes of a consecutive case series of 9 patients with defect filling at the iliac crest with this novel scaffold biomaterial after tricortical bone graft harvesting with a minimum follow-up of 6 months. All 9 patients (8 male, 1 female) with an average age of 42.7 years (range: 18-76 years) had tricortical bone graft harvesting from the iliac crest for different reconstructive procedures at the extremities and received blocks of the biomaterial with an average size of 26.3 × 16.8 × 10 mm (length, height, width; range: 15 × 15 × 10 to 40 × 20 × 10 mm). Intraoperative handling of the biomaterial was easy and the blocks could be customized to the individual size of the defect with standard surgical instruments and were press-fitted into the defect. All 9 patients showed uneventful wound healing at the iliac crest and 7 patients reported no pain (VAS: 0) and two patients only mild pain (VAS:1 and VAS:3) after an average follow-up of 9.8 months (range: 6-16 months). There was no post-operative hematoma, surgical revision or other implant-related complications at the iliac crest. In all patients, good radiographical integration without dislocation of the implant and good bony integration was observed. The use of this novel biomaterial for iliac crest defect filling was associated with good clinical and radiographical outcomes after an average follow-up of 9.8 months.

Recent advances in biofunctional guided bone regeneration materials for repairing defective alveolar and maxillofacial bone: A review

The anatomy of the oral and maxillofacial sites is complex, and bone defects caused by trauma, tumors, and inflammation in these zones are extremely difficult to repair. Among the most effective and reliable methods to attain osteogenesis, the guided bone regeneration (GBR) technique is extensively applied in defective oral and maxillofacial GBR. Furthermore, endowing biofunctions is crucial for GBR materials applied in repairing defective alveolar and maxillofacial bones. In this review, recent advances in designing and fabricating GBR materials applied in oral and maxillofacial sites are classified and discussed according to their biofunctions, including maintaining space for bone growth; facilitating the adhesion, migration, and proliferation of osteoblasts; facilitating the migration and differentiation of progenitor cells; promoting vascularization; providing immunoregulation to induce osteogenesis; suppressing infection; and effectively mimicking natural tissues using graded biomimetic materials. In addition, new processing strategies (e.g., 3D printing) and new design concepts (e.g., developing bone mimetic extracellular matrix niches and preparing scaffolds to suppress connective tissue to actively acquire space for bone regeneration), are particularly worthy of further study. In the future, GBR materials with richer biological functions are expected to be developed based on an in-depth understanding of the mechanism of bone-GBR-material interactions.

An Observational Prospective Clinical Study for the Evaluation of a Collagen-Hydroxyapatite Composite Scaffold in Hip Revision Surgery

One of the greatest challenges of hip revision surgery is the need to restore extensive bone loss by creating a stable reconstruction with long-term durability. The present observational, investigator-initiated prospective study was carried out to evaluate the clinical and radiological results of the use of a commercial biomimetic collagen-hydroxyapatite composite biomaterial (RegenOss) applied in hip revision surgery. Thirty-three patients who underwent hip revision were included in this study, and 29 received up to 2 years of follow-up. The acetabulum was reconstructed using an uncemented hemispherical shell both with or without an iliac fixation stem. Functional recovery was assessed according to the Harris Hip Score (HHS) at the pre-hospitalisation check-up, and at 6-, 12-, and 24-month follow-ups. Radiological evaluation consisting of X-ray analyses (6, 12, and 24 month follow-ups) and CT scan exams (within 10 weeks post-surgery and at 12-month follow-up) were performed to evaluate the reduction in bone defect and new bone regeneration. All the patients reported a complete recovery and a considerable improvement in functional outcome assessed by the HHS, which was significantly higher at all the follow-ups than at pre-hospitalisation. Moreover, radiological assessments revealed good scaffold integration. Overall, collected data suggest that RegenOss is a valid and safe alternative to restoring acetabular bone loss in revision hip arthroplasty.

Smart biomaterials and their potential applications in tissue engineering

Smart biomaterials have been rapidly advancing ever since the concept of tissue engineering was proposed. Interacting with human cells, smart biomaterials can play a key role in novel tissue morphogenesis. Various aspects of biomaterials utilized in or being sought for the goal of encouraging bone regeneration, skin graft engineering, and nerve conduits are discussed in this review. Beginning with bone, this study summarizes all the available bioceramics and materials along with their properties used singly or in conjunction with each other to create scaffolds for bone tissue engineering. A quick overview of the skin-based nanocomposite biomaterials possessing antibacterial properties for wound healing is outlined along with skin regeneration therapies using infrared radiation, electrospinning, and piezoelectricity, which aid in wound healing. Furthermore, a brief overview of bioengineered artificial skin grafts made of various natural and synthetic polymers has been presented. Finally, by examining the interactions between natural and synthetic-based biomaterials and the biological environment, their strengths and drawbacks for constructing peripheral nerve conduits are highlighted. The description of the preclinical outcome of nerve regeneration in injury healed with various natural-based conduits receives special attention. The organic and synthetic worlds collide at the interface of nanomaterials and biological systems, producing a new scientific field including nanomaterial design for tissue engineering.

Application of Nano-Inspired Scaffolds-Based Biopolymer Hydrogel for Bone and Periodontal Tissue Regeneration

This review’s objectives are to provide an overview of the various kinds of biopolymer hydrogels that are currently used for bone tissue and periodontal tissue regeneration, to list the advantages and disadvantages of using them, to assess how well they might be used for nanoscale fabrication and biofunctionalization, and to describe their production processes and processes for functionalization with active biomolecules. They are applied in conjunction with other materials (such as microparticles (MPs) and nanoparticles (NPs)) and other novel techniques to replicate physiological bone generation more faithfully. Enhancing the biocompatibility of hydrogels created from blends of natural and synthetic biopolymers can result in the creation of the best scaffold match to the extracellular matrix (ECM) for bone and periodontal tissue regeneration. Additionally, adding various nanoparticles can increase the scaffold hydrogel stability and provide a number of biological effects. In this review, the research study of polysaccharide hydrogel as a scaffold will be critical in creating valuable materials for effective bone tissue regeneration, with a future impact predicted in repairing bone defects.

Electrospun electroconductive constructs of aligned fibers for cardiac tissue engineering

Myocardial infarction remains the leading cause of death in the western world. Since the heart has limited regenerative capabilities, several cardiac tissue engineering (CTE) strategies have been proposed to repair the damaged myocardium. A novel electrospun construct with aligned and electroconductive fibers combining gelatin, poly(lactic-co-glycolic) acid and polypyrrole that may serve as a cardiac patch is presented. Constructs were characterized for fiber alignment, surface wettability, shrinkage and swelling behavior, porosity, degradation rate, mechanical properties, and electrical properties. Cell-biomaterial interactions were studied using three different types of cells, Neonatal Rat Ventricular Myocytes (NRVM), human lung fibroblasts (MRC-5) and induced pluripotent stem cells (iPSCs). All cell types showed good viability and unique organization on construct surfaces depending on their phenotype. Finally, we assessed the maturation status of NRVMs after 14 days by confocal images and qRT-PCR. Overall evidence supports a proof-of-concept that this novel biomaterial construct could be a good candidate patch for CTE applications.

In Vitro Models of Bone Marrow Remodelling and Immune Dysfunction in Space: Present State and Future Directions

Spaceflight affects the body on every level. Reports on astronaut health identify bone marrow remodelling and dysfunction of the innate immune system as significant health risks of long-term habitation in space. Microgravity-induced alterations of the bone marrow induce physical changes to the bone marrow stem cell niche. Downstream effects on innate immunity are expected due to impaired hematopoiesis and myelopoiesis. To date, few studies have investigated these effects in real microgravity and the sparsely available literature often reports contrasting results. This emphasizes a need for the development of physiologically relevant in vitro models of the bone marrow stem cell niche, capable of delivering appropriate sample sizes for robust statistics. Here, we review recent findings on the impact of spaceflight conditions on innate immunity in in vitro and animal models and discusses the latest in vitro models of the bone marrow stem cell niche and their potential translatability to gravitational biology research.

Mechanomimetic 3D Scaffolds as a Humanized In Vitro Model for Ovarian Cancer

The mechanical homeostasis of tissues can be altered in response to trauma or disease, such as cancer, resulting in altered mechanotransduction pathways that have been shown to impact tumor development, progression, and the efficacy of therapeutic approaches. Specifically, ovarian cancer progression is parallel to an increase in tissue stiffness and fibrosis. With in vivo models proving difficult to study, tying tissue mechanics to altered cellular and molecular properties necessitate advanced, tunable, in vitro 3D models able to mimic normal and tumor mechanic features. First, we characterized normal human ovary and high-grade serous (HGSC) ovarian cancer tissue stiffness to precisely mimic their mechanical features on collagen I-based sponge scaffolds, soft (NS) and stiff (MS), respectively. We utilized three ovarian cancer cell lines (OVCAR-3, Caov-3, and SKOV3) to evaluate changes in viability, morphology, proliferation, and sensitivity to doxorubicin and liposomal doxorubicin treatment in response to a mechanically different microenvironment. High substrate stiffness promoted the proliferation of Caov-3 and SKOV3 cells without changing their morphology, and upregulated mechanosensors YAP/TAZ only in SKOV3 cells. After 7 days in culture, both OVCAR3 and SKOV3 decreased the MS scaffold storage modulus (stiffness), suggesting a link between cell proliferation and the softening of the matrix. Finally, high matrix stiffness resulted in higher OVCAR-3 and SKOV3 cell cytotoxicity in response to doxorubicin. This study demonstrates the promise of biomimetic porous scaffolds for effective inclusion of mechanical parameters in 3D cancer modeling. Furthermore, this work establishes the use of porous scaffolds for studying ovarian cancer cells response to mechanical changes in the microenvironment and as a meaningful platform from which to investigate chemoresistance and drug response.

3D Printed Scaffold Based on Type I Collagen/PLGA_TGF-β1 Nanoparticles Mimicking the Growth Factor Footprint of Human Bone Tissue

In bone regenerative strategies, the controlled release of growth factors is one of the main aspects for successful tissue regeneration. Recent trends in the drug delivery field increased the interest in the development of biodegradable systems able to protect and transport active agents. In the present study, we designed degradable poly(lactic-co-glycolic)acid (PLGA) nanocarriers suitable for the release of Transforming Growth Factor-beta 1 (TGF-β1), a key molecule in the management of bone cells behaviour. Spherical TGF-β1-containing PLGA (PLGA_TGF-β1) nanoparticles (ca.250 nm) exhibiting high encapsulation efficiency (ca.64%) were successfully synthesized. The TGF-β1 nanocarriers were subsequently combined with type I collagen for the fabrication of nanostructured 3D printed scaffolds able to mimic the TGF-β1 presence in the human bone extracellular matrix (ECM). The homogeneous hybrid formulation underwent a comprehensive rheological characterisation in view of 3D printing. The 3D printed collagen-based scaffolds (10 mm × 10 mm × 1 mm) successfully mimicked the TGF-β1 presence in human bone ECM as assessed by immunohistochemical TGF-β1 staining, covering ca.3.4% of the whole scaffold area. Moreover, the collagenous matrix was able to reduce the initial burst release observed in the first 24 h from about 38% for the PLGA_TGF-β1 alone to 14.5%, proving that the nanocarriers incorporation into collagen allows achieving sustained release kinetics.

Osteogenic differentiation of human mesenchymal stem cells on substituted calcium phosphate/chitosan composite scaffold

Ionic substitutions are a promising strategy to enhance the biological performance of calcium phosphates (CaP) and composite materials for bone tissue engineering applications. However, systematic studies have not been performed on multi-substituted organic/inorganic scaffolds. In this work, highly porous composite scaffolds based on CaPs substituted with Sr²⁺, Mg²⁺, Zn²⁺ and SeO₃^2- ions, and chitosan have been prepared by freeze-gelation technique. The scaffolds have shown highly porous structure, with very well interconnected pores and homogeneously dispersed CaPs, and high stability during 28 days in the degradation medium. Osteogenic potential of human mesenchymal stem cells seeded on scaffolds has been determined by histological, immunohistochemical and RT-qPCR analysis of cultured cells in static and dynamic conditions. Results indicated that ionic substitutions have a beneficial effect on cells and tissues. The scaffolds with multi-substituted CaPs have shown increased expression of osteogenesis related markers and increased phosphate deposits, compared to the scaffolds with non-substituted CaPs.

Studying Activated Fibroblast Phenotypes and Fibrosis-Linked Mechanosensing Using 3D Biomimetic Models

Fibrosis and solid tumor progression are closely related, with both involving pathways associated with chronic wound dysregulation. Fibroblasts contribute to extracellular matrix (ECM) remodeling in these processes, a crucial step in scarring, organ failure, and tumor growth, but little is known about the biophysical evolution of remodeling regulation during the development and progression of matrix-related diseases including fibrosis and cancer. A 3D collagen-based scaffold model is employed here to mimic mechanical changes in normal (2 kPa, soft) versus advanced pathological (12 kPa, stiff) tissues. Activated fibroblasts grown on stiff scaffolds show lower migration and increased cell circularity compared to those on soft scaffolds. This is reflected in gene expression profiles, with cells cultured on stiff scaffolds showing upregulated DNA replication, DNA repair, and chromosome organization gene clusters, and a concomitant loss of ability to remodel and deposit ECM. Soft scaffolds can reproduce biophysically meaningful microenvironments to investigate early stage processes in wound healing and tumor niche formation, while stiff scaffolds can mimic advanced fibrotic and cancer stages. These results establish the need for tunable, affordable 3D scaffolds as platforms for aberrant stroma research and reveal the contribution of physiological and pathological microenvironment biomechanics to gene expression changes in the stromal compartment.

Novel, degradable, and cytoactive bone cements based on magnesium polyphosphate and calcium citrate

Ideal bone-filling materials should be degradable and efficient for fast bone remodeling.

Osteogenesis in the presence of chemotherapy: A biomimetic approach

Osteosarcoma (OS) is the most common bone tumor in pediatrics. After resection, allografts or metal endoprostheses reconstruct bone voids, and systemic chemotherapy is used to prevent recurrence. This urges the development of novel treatment options for the regeneration of bone after excision. We utilized a previously developed biomimetic, biodegradable magnesium-doped hydroxyapatite/type I collagen composite material (MHA/Coll) to promote bone regeneration in the presence of chemotherapy. We also performed experiments to determine if human mesenchymal stem cells (hMSCs) seeded on MHA/Coll scaffold migrate less toward OS cells, suggesting that hMSCs will not contribute to tumor growth and therefore the potential of oncologic safety in vitro. Also, hMSCs seeded on MHA/Coll had increased expression of osteogenic genes (BGLAP, SPP1, ALP) compared to hMSCs in the 2D condition, even when exposed to chemotherapeutics. This is the first study to demonstrate that a highly osteogenic scaffold can potentially be oncologically safe because hMSCs on MHA/Coll tend to differentiate and lose the ability to migrate toward tumor cells. Therefore, hMSCs on MHA/Coll could potentially be utilized for bone regeneration after OS excision.

The Role of Long Non-Coding RNAs and Circular RNAs in Bone Regeneration: Modulating MiRNAs Function

Although bone is a self-healing organ and is able to repair and restore most fractures, large bone fractures, about 10%, are not repairable. Bone grafting, as a gold standard, and bone tissue engineering using biomaterials, growth factors, and stem cells have been developed to restore large bone defects. Since bone regeneration is a complex and multiple-step process and the majority of the human genome, about 98%, is composed of the non-protein-coding regions, non-coding RNAs (ncRNAs) play essential roles in bone regeneration. Recent studies demonstrated that long ncRNAs (lncRNAs) and circular RNAs (circRNAs), as members of ncRNAs, are widely involved in bone regeneration by interaction with microRNAs (miRNAs) and constructing a lncRNA or circRNA/miRNA/mRNA regulatory network. The constructed network regulates the differentiation of stem cells into osteoblasts and their commitment to osteogenesis. This review will present the structure and biogenesis of lncRNAs and circRNAs, the mechanism of bone repair, and the bone tissue engineering in bone defects. Finally, we will discuss the role of lncRNAs and circRNAs in osteogenesis and bone fracture healing through constructing various lncRNA or circRNA/miRNA/mRNA networks and the involved pathways. This article is protected by copyright. All rights reserved.

Decellularized natural 3D cellulose scaffold derived from Borassus flabellifer (Linn.) as extracellular matrix for tissue engineering applications

In this study, Borassus flabellifer (Linn.) (BF) immature endosperm was decellularized to produce three dimensional (3D) cellulose scaffolds that can support mammalian 3D cell culture. To this regard, we first evaluated the chemical composition, nutritive profile and pharmacological activities of BF endosperm. The results demonstrated that the BF tissue represented a complex concoction of polysaccharides with intrinsic phyto-ingredients which provide excellent pharmacological properties. Furthermore cellulosic scaffolds (CS) obtained from BF was treated with chitosan to produce cellulose-chitosan (CS/CHI) hybrid scaffolds. The comparative investigation on both scaffolds exhibited adequate swelling with controlled porosity and pore-size distribution. The physiochemical characterization showed reduced biodegradation, improved thermal stability and enhanced compressive strength in CS/CHI group. Biological studies reported favorable adhesion and proliferation of fibroblasts with evident cellular penetration and colonization on the both scaffolds. Taken together, plant derived cellulosic scaffolds could be used as an alternative scaffolding material in regenerative medicine.

Improved Posterolateral Lumbar Spinal Fusion Using a Biomimetic, Nanocomposite Scaffold Augmented by Autologous Platelet-Rich Plasma

Remodeling of the human bony skeleton is constantly occurring with up to 10% annual bone volume turnover from osteoclastic and osteoblastic activity. A shift toward resorption can result in osteoporosis and pathologic fractures, while a shift toward deposition is required after traumatic, or surgical injury. Spinal fusion represents one such state, requiring a substantial regenerative response to immobilize adjacent vertebrae through bony union. Autologous bone grafts were used extensively prior to the advent of advanced therapeutics incorporating exogenous growth factors and biomaterials. Besides cost constraints, these applications have demonstrated patient safety concerns. This study evaluated the regenerative ability of a nanostructured, magnesium-doped, hydroxyapatite/type I collagen scaffold (MHA/Coll) augmented by autologous platelet-rich plasma (PRP) in an orthotopic model of posterolateral lumbar spinal fusion. After bilateral decortication, rabbits received either the scaffold alone (Group 1) or scaffold with PRP (Group 2) to the anatomic right side. Bone regeneration and fusion success compared to internal control were assessed by DynaCT with 3-D reconstruction at 2, 4, and 6 weeks postoperatively followed by comparative osteogenic gene expression and representative histopathology. Both groups formed significantly more new bone volume than control, and Group 2 subjects produced significantly more trabecular and cortical bone than Group 1 subjects. Successful fusion was seen in one Group 1 animal (12.5%) and 6/8 Group 2 animals (75%). This enhanced effect by autologous PRP treatment appears to occur via astounding upregulation of key osteogenic genes. Both groups demonstrated significant gene upregulation compared to vertebral bone controls for all genes. Group 1 averaged 2.21-fold upregulation of RUNX2 gene, 3.20-fold upregulation of SPARC gene, and 3.67-fold upregulation of SPP1 gene. Depending on anatomical subgroup (cranial, mid, caudal scaffold portions), Group 2 had significantly higher average expression of all genes than both control and Group 1–RUNX2 (8.23–19.74 fold), SPARC (18.67–55.44 fold), and SPP1 (46.09–90.65 fold). Our data collectively demonstrate the osteoinductive nature of a nanostructured MHA/Coll scaffold, a beneficial effect of augmentation with autologous PRP, and an ability to achieve clinical fusion when applied together in an orthotopic model. This has implications both for future study and biomedical innovation of bone-forming therapeutics.

Beta-phase Stabilization and Increased Osteogenic Differentiation of Stem Cells by Solid-State Synthesized Magnesium Tricalcium Phosphate

In this study, magnesium and strontium-doped β-tricalcium phosphates were synthesized to understand dopant impact on substrate chemistry and morphology, and proliferation and osteogenic differentiation of mesenchymal stem cells. Under solid-state synthesis, magnesium doping stabilized the β-phase in tricalcium phosphate, with 22% less α-phase content than control. Strontium doping increased α-phase formation by 17%, and also resulted in greater surface porosity, leading to greater crystal precipitation in vitro. Magnesium also significantly enhanced the proliferation of stem cells (P < 0.05) and differentiation into osteoblasts with increased alkaline phosphatase production (P < 0.05) at all time points. These results indicated that magnesium stabilizes β-tricalcium phosphate in vitro and enhanced early and late-time-point osteoconduction and osteoinduction of mesenchymal stem cells.

Atomistic insights into the structure and elasticity of densified 45S5 bioactive glasses

Glasses have applications in regenerative medicine due to their bioactivity, enabling interactions with hard and soft tissues. Soda-lime phosphosilicate glasses, such as 45S5, represent a model system of bioactive glasses. Regardless of their importance as bioactive materials, the relationship between the structure, density, and cooling process has not been studied in detail. This hinders further development of glasses as biomaterials. We used molecular dynamics simulations to study the elastic and structural properties of densified 45S5 bioactive glass and liquids over a wide range of densities. We performed a systematic analysis of the glass structure to density relationship to correlate the change in the properties with the structural change to enhance the mechanical properties of bioactive glasses while preserving their bioactive nature. The results show that the glass structure tends to be repolymerized, as indicated by increased network connectivity and a tetrahedral to octahedral polyhedral transition. We were able to tailor the elastic properties while keeping the bioactivity of the glass. The results presented here will provide some guidance to develop bioactive glasses with enhanced mechanical properties.

3D Cocultures of Osteoblasts and Staphylococcus aureus on Biomimetic Bone Scaffolds as a Tool to Investigate the Host-Pathogen Interface in Osteomyelitis

Osteomyelitis (OM) is an infectious disease of the bone primarily caused by the opportunistic pathogen Staphylococcus aureus (SA). This Gram-positive bacterium has evolved a number of strategies to evade the immune response and subvert bone homeostasis, yet the underlying mechanisms remain poorly understood. OM has been modeled in vitro to challenge pathogenetic hypotheses in controlled conditions, thus providing guidance and support to animal experimentation. In this regard, traditional 2D models of OM inherently lack the spatial complexity of bone architecture. Three-dimensional models of the disease overcome this limitation; however, they poorly reproduce composition and texture of the natural bone. Here, we developed a new 3D model of OM based on cocultures of SA and murine osteoblastic MC3T3-E1 cells on magnesium-doped hydroxyapatite/collagen I (MgHA/Col) scaffolds that closely recapitulate the bone extracellular matrix. In this model, matrix-dependent effects were observed in proliferation, gene transcription, protein expression, and cell–matrix interactions both of the osteoblastic cell line and of bacterium. Additionally, these had distinct metabolic and gene expression profiles, compared to conventional 2D settings, when grown on MgHA/Col scaffolds in separate monocultures. Our study points to MgHA/Col scaffolds as biocompatible and bioactive matrices and provides a novel and close-to-physiology tool to address the pathogenetic mechanisms of OM at the host–pathogen interface.

Osteoinductivity and biomechanical assessment of a 3D printed demineralized bone matrix-ceramic composite in a rat spine fusion model

We recently developed a recombinant growth factor-free bone regenerative scaffold composed of stoichiometric hydroxyapatite (HA) ceramic particles and human demineralized bone matrix (DBM) particles (HA-DBM). Here, we performed the first pre-clinical comparative evaluation of HA-DBM relative to the industry standard and established positive control, recombinant human bone morphogenetic protein-2 (rhBMP-2), using a rat posterolateral spinal fusion model (PLF). Female Sprague-Dawley rats underwent bilateral L4-L5 PLF with implantation of the HA-DBM scaffold or rhBMP-2. Fusion was evaluated using radiography and blinded manual palpation, while biomechanical testing quantified the segmental flexion-extension range-of-motion (ROM) and stiffness of the fused segments at 8-weeks postoperatively. For mechanistic studies, pro-osteogenic gene and protein expression at 2-days and 1-, 2-, and 8-weeks postoperatively was assessed with another cohort. Unilateral fusion rates did not differ between the HA-DBM (93%) and rhBMP-2 (100%) groups; however, fusion scores were higher with rhBMP-2 (p = 0.008). Both treatments resulted in significantly reduced segmental ROM (p < 0.001) and greater stiffness (p = 0.009) when compared with non-operated controls; however, the degree of stabilization was significantly higher with rhBMP-2 treatment relative to the HA-DBM scaffold. In the mechanistic studies, PLGA and HA scaffolds were used as negative controls. Both rhBMP-2 and HA-DBM treatments resulted in significant elevations of several osteogenesis-associated genes, including Runx2, Osx, and Alp. The rhBMP-2 treatment led to significantly greater early, mid, and late osteogenic markers, which may be the mechanism in which early clinical complications are seen. The HA-DBM scaffold also induced osteogenic gene expression, but primarily at the 2-week postoperative timepoint. Overall, our findings show promise for this 3D-printed composite as a recombinant growth factor-free bone graft substitute for spinal fusion. STATEMENT OF SIGNIFICANCE: Despite current developments in bone graft technology, there remains a significant void in adequate materials for bone regeneration in clinical applications. Two of the most efficacious bone graft options are the gold-standard iliac crest bone graft and recombinant human-derived bone morphogenetic protein-2 (rhBMP-2), available commercially as Infuse™. Although efficacious, autologous graft is associated with donor-site morbidity, and Infuse™ has known side effects related to its substantial host inflammatory response, possibly associated with a immediate, robust osteoinductive response. Hence, there is a need for a bone graft substitute that provides adequate osteogenesis without associated adverse events. This study represents a significant step in the design of off-the-shelf growth factor-free devices for spine fusion.

A review of biomimetic scaffolds for bone regeneration: Toward a cell-free strategy

In clinical terms, bone grafting currently involves the application of autogenous, allogeneic, or xenogeneic bone grafts, as well as natural or artificially synthesized materials, such as polymers, bioceramics, and other composites. Many of these are associated with limitations. The ideal scaffold for bone tissue engineering should provide mechanical support while promoting osteogenesis, osteoconduction, and even osteoinduction. There are various structural complications and engineering difficulties to be considered. Here, we describe the biomimetic possibilities of the modification of natural or synthetic materials through physical and chemical design to facilitate bone tissue repair. This review summarizes recent progresses in the strategies for constructing biomimetic scaffolds, including ion-functionalized scaffolds, decellularized extracellular matrix scaffolds, and micro- and nano-scale biomimetic scaffold structures, as well as reactive scaffolds induced by physical factors, and other acellular scaffolds. The fabrication techniques for these scaffolds, along with current strategies in clinical bone repair, are described. The developments in each category are discussed in terms of the connection between the scaffold materials and tissue repair, as well as the interactions with endogenous cells. As the advances in bone tissue engineering move toward application in the clinical setting, the demonstration of the therapeutic efficacy of these novel scaffold designs is critical.

Bioinspired mineralized collagen scaffolds for bone tissue engineering

Successful regeneration of large segmental bone defects remains a major challenge in clinical orthopedics, thus it is of important significance to fabricate a suitable alternative material to stimulate bone regeneration. Due to their excellent biocompatibility, sufficient mechanical strength, and similar structure and composition of natural bone, the mineralized collagen scaffolds (MCSs) have been increasingly used as bone substitutes via tissue engineering approaches. Herein, we thoroughly summarize the state of the art of MCSs as tissue-engineered scaffolds for acceleration of bone repair, including their fabrication methods, critical factors for osteogenesis regulation, current opportunities and challenges in the future. First, the current fabrication methods for MCSs, mainly including direct mineral composite, in-situ mineralization and 3D printing techniques, have been proposed to improve their biomimetic physical structures in this review. Meanwhile, three aspects of physical (mechanics and morphology), biological (cells and growth factors) and chemical (composition and cross-linking) cues are described as the critical factors for regulating the osteogenic feature of MCSs. Finally, the opportunities and challenges associated with MCSs as bone tissue-engineered scaffolds are also discussed to point out the future directions for building the next generation of MCSs that should be endowed with satisfactorily mimetic structures and appropriately biological characters for bone regeneration.

Matrix stiffening by self-mineralizable guided bone regeneration

Collagen membranes produced in vitro with different degrees of intrafibrillar mineralization are potentially useful for guided bone regeneration (GBR). However, highly-mineralized collagen membranes are brittle and difficult for clinical manipulation. The present study aimed at developing an intrafibrillar self-mineralization strategy for GBR membrane by covalently conjugating high-molecular weight polyacrylic acid (HPAA) on Bio-Gide® membranes (BG). The properties of the self-mineralizable membranes (HBG) and their potential to induce bone regeneration were investigated. The HBG underwent the progressive intrafibrillar mineralization as well as the increase in stiffness after immersed in supersaturated calcium phosphate solution, osteogenic medium, or after being implanted into a murine calvarial bone defect. The HBG promoted in-situ bone regeneration via stimulating osteogenic differentiation of mesenchymal stromal cells (MSCs). Hippo signaling was inhibited when MSCs were cultured on the self-mineralized HBG, and in HBG-promoted MSC osteogenesis during in-situ bone regeneration. This resulted in translocation of the transcription co-activators Yes-associated protein (YAP) and transcriptional coactivator with PDZ-binding motif (TAZ) into the nucleus to induce transcription of genes promoting osteogenic differentiation of MSCs. Taken together, these findings indicated that HBG possessed the ability to self-mineralize in situ via intrafibrillar mineralization. The increase in stiffness of the extracellular matrix expedited in-situ bone regeneration by inactivating the Hippo-YAP/TAZ signaling cascade. STATEMENT OF SIGNIFICANCE: Guided bone regeneration (GBR) membranes made of naturally derived collagen have been widely used in the bone defect restoration. However, application of collagen GBR membranes run into the bottleneck with the challenges like insufficient stress strength, relatively poor dimensional stability and unsatisfactory osteoinductivity. This study develops a modified GBR membrane that can undergo progressive self-mineralization and matrix stiffening in situ. Increase in extracellular matrix stiffness provides the mechanical cues required for MSCs differentiation and expedites in-situ bone regeneration by inactivating the Hippo-YAP/TAZ signaling cascade.

Bioinspired inorganic nanoparticles and vascular factor microenvironment directed neo-bone formation

Various strategies have been explored to stimulate new bone formation. These strategies include using angiogenic stimulants in combination with inorganic biomaterials. Neovascularization during the neo-bone formation provides nutrients along with bone-forming minerals. Therefore, it is crucial to design a bone stimulating microenvironment composed of both pro-angiogenic and osteogenic factors. In this respect, human vascular endothelial growth factor (hVEGF) has been shown to promote blood vessel formation and bone formation. Furthermore, in recent years, whitlockite (WH), a novel phase of magnesium-containing calcium phosphate derivatives that exist in our bone tissue, has been synthesized and applied in bone tissue engineering. In this study, our aim is to explore the potential use of hVEGF and WH for bone tissue engineering. Our study demonstrated that hVEGF and a WH microenvironment synergistically stimulated osteogenic commitment of mesenchymal stem cells both in vitro and in vivo.

Bioactive and Topographically-Modified Electrospun Membranes for the Creation of New Bone Regeneration Models

Bone injuries that arise from trauma, cancer treatment, or infection are a major and growing global challenge. An increasingly ageing population plays a key role in this, since a growing number of fractures are due to diseases such as osteoporosis, which place a burden on healthcare systems. Current reparative strategies do not sufficiently consider cell-substrate interactions that are found in healthy tissues; therefore, the need for more complex models is clear. The creation of in vitro defined 3D microenvironments is an emerging topographically-orientated approach that provides opportunities to apply knowledge of cell migration and differentiation mechanisms to the creation of new cell substrates. Moreover, introducing biofunctional agents within in vitro models for bone regeneration has allowed, to a certain degree, the control of cell fate towards osteogenic pathways. In this research, we applied three methods for functionalizing spatially-confined electrospun artificial microenvironments that presented relevant components of the native bone stem cell niche. The biological and osteogenic behaviors of mesenchymal stromal cells (MSCs) were investigated on electrospun micro-fabricated scaffolds functionalized with extracellular matrix (ECM) proteins (collagen I), glycosaminoglycans (heparin), and ceramic-based materials (bioglass). Collagen, heparin, and bioglass (BG) were successfully included in the models without modifying the fibrous structures offered by the polycaprolactone (PCL) scaffolds. Mesenchymal stromal cells (MSCs) were successfully seeded in all the biofunctional scaffolds and they showed an increase in alkaline phosphatase production when exposed to PCL/BG composites. This research demonstrates the feasibility of manufacturing smart and hierarchical artificial microenvironments for studying stem cell behavior and ultimately the potential of incorporating these artificial microenvironments into multifunctional membranes for bone tissue regeneration

Alternate soaking enables easy control of mineralized collagen scaffold mechanics from nano- to macro-scale

The mechanical properties of biologic scaffolds are critical to cellular interactions and hence functional response within the body. In the case of scaffolds for bone tissue regeneration, engineered scaffolds created by combining collagen with inorganic mineral are increasingly being explored, due to their favourable structural and chemical characteristics. Development of a method for controlling the mechanics of these scaffolds could lead to significant additional advantages by harnessing the intrinsic mechnotransduction pathways of stem cells via appropriate control of scaffold mechanical properties. Here we present a method for controlling the macroscale flexural modulus of mineralized collagen sheets, and the radial indentation modulus of the sheets' constituent collagen fibrils. Scaffolds were created starting with sheets of highly aligned, natively structured collagen fibrils, prepared via cryosectioning of decellularized tendon. Sheets underwent an alternate soaking mineralization procedure, with sequential exposure to citrate-doped calcium and carbonate-containing phosphate solutions, both of which included poly aspartic acid. The extent of scaffold mineralization was controlled via number of repeated mineralization cycles: 0 (unmineralized), 5, 10, and 20 cycles were trialed. Following scaffold preparation, ultrastructure, macroscale flexural modulus, and nanoscale indentation modulus were assessed. Surface architecture studied by SEM, and inspection of individual extracted fibrils by TEM and AFM confirmed that fibrils became increasingly laden with mineral as the number of mineralization cycles increased. Measurements of collagen fibril nanomechanics using AFM showed that the radial modulus of collagen fibrils increased linearly with mineralization cycles completed, from 215 ± 125 MPa for fibrils from unmineralized (0 cycle) scaffolds to 778 ± 302 MPa for fibrils from the 20 mineralization cycle scaffolds. Measurements of scaffold macromechanics via flexural testing also showed a linear increase in flexural modulus with increasing number of mineralization cycles completed, from 18 ± 7 MPa for the 5 cycle scaffolds to 156 ± 50 MPa for the 20 cycle scaffolds. The process detailed herein provides a way to create mineralized collagen scaffolds with easily controllable mechanical properties.

Nanostructured Biomaterials for Bone Regeneration

This review article addresses the various aspects of nano-biomaterials used in or being pursued for the purpose of promoting bone regeneration. In the last decade, significant growth in the fields of polymer sciences, nanotechnology, and biotechnology has resulted in the development of new nano-biomaterials. These are extensively explored as drug delivery carriers and as implantable devices. At the interface of nanomaterials and biological systems, the organic and synthetic worlds have merged over the past two decades, forming a new scientific field incorporating nano-material design for biological applications. For this field to evolve, there is a need to understand the dynamic forces and molecular components that shape these interactions and influence function, while also considering safety. While there is still much to learn about the bio-physicochemical interactions at the interface, we are at a point where pockets of accumulated knowledge can provide a conceptual framework to guide further exploration and inform future product development. This review is intended as a resource for academics, scientists, and physicians working in the field of orthopedics and bone repair.

Identification of ultrasound imaging markers to quantify long bone regeneration in a segmental tibial defect sheep model in vivo

The healing of large bone defects has been investigated for decades due to its complexity and clinical relevance. Ultrasound (US) methods have shown promise in monitoring bone healing, but no quantitative method to assess regenerated bone morphology in US images has been presented yet. In this study, we investigate new US morphometric parameters to quantify bone regeneration in vivo. A segmental tibial defect was surgically created and stabilized in a sheep animal model. US and computed tomography (CT) imaging data were collected two months post-surgery. New bone was assessed, reconstructed and quantified from the US and CT data using 3 morphometric parameters: the new-bone bulk (NBB), new-bone surface (NBS) and new-bone contact (NBC). The distance (mm) between surface reconstructions from repeated US was \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.49\pm 0.30$$\end{document}0.49±0.30 and from US and CT was \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.89\pm 0.49$$\end{document}0.89±0.49. In the mid-shaft of the defected tibia, US measurements of NBB, NBS and NBC were significantly higher than the corresponding CT measurements (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p < 0.001$$\end{document}p<0.001). Based on our results, we conclude that US may complement CT to reconstruct and quantify bone regrowth, especially in its early stages.

Bioinspired Scaffold Action Under the Extreme Physiological Conditions of Simulated Space Flights: Osteogenesis Enhancing Under Microgravity

Prolonged exposure to microgravity (MG) during long-duration space flights is known to induce severe dysregulation of osteoblast functions connected to a significant bone loss, similar to the condition induced by osteoporosis. Hence, we here present MG as a promising model to challenge the effectiveness of new scaffolds designed for bone regeneration in counteracting bone loss. To this end, we carried out an integrative study aimed to evaluate, in the extreme condition of Random Positioning Machine-simulated MG, the osteoinductive potential of nanocrystalline magnesium-doped hydroxyapatite/type I collagen composite scaffold (MHA/Coll), that we previously demonstrated to be an excellent tool for bone tissue engineering. Initially, to test the osteoinductive properties of our bioinspired-scaffold, MHA/Coll structure was fully characterized under MG condition and compared to its static counterpart. Human bone marrow-derived mesenchymal stem cells were used to investigate the scaffold biocompatibility and ability to promote osteogenic differentiation after long-duration exposure to MG (up to 21 days). The results demonstrate that the nanostructure of MHA/Coll scaffold can alleviate MG-induced osteoblast dysfunction, promoting cell differentiation along the osteogenic lineage, with a consequent reduction in the expression of the surface markers CD29, CD44, and CD90. Moreover, these findings were corroborated by the ability of MHA/Coll to induce the expression of genes linked to osteogenesis, including alkaline phosphatase and osteocalcin. This study confirmed MHA/Coll capabilities in promoting osteogenesis even in extreme long-term condition of MG, suggesting MG as an effective challenging model to apply in future studies to validate the ability of advanced scaffolds to counteract bone loss, facilitating their application in translational Regenerative Medicine and Tissue Engineering.

Mimicking the Organic and Inorganic Composition of Anabolic Bone Enhances Human Mesenchymal Stem Cell Osteoinduction and Scaffold Mechanical Properties

Engineered bone graft designs have been largely inspired by adult bone despite functionally significant differences from the composition of anabolic bone in both the mineralized and non-mineralized fractions. Specifically, anabolic bone contains hydroxyapatite with ionic substitutions that facilitate bone turnover and relatively rare collagens type VI and XII that are important for normal bone development. In this work, human mesenchymal stem cells (hMSCs) were cultured in lyophilized collagen type I scaffolds mineralized with hydroxyapatite containing Mg²⁺ substitutions, then induced to deposit an extracellular matrix (ECM) containing collagens VI and XII by exposure to GW9662, a PPARγ inhibitor. Delivery of GW9662 was accomplished through either Supplemented Media or via composite microspheres embedded in the scaffolds for localized delivery. Furthermore, hMSCs and scaffolds were cultured in both static and perfuse conditions to investigate the interaction between GW9662 treatment and perfusion and their effects on ECM deposition trends. Perfusion culture enhanced cell infiltration into the scaffold, deposition of collagen VI and XII, as well as osteogenic differentiation, as determined by gene expression of osteopontin, BMP2, and ALP. Furthermore, scaffold mineral density and compressive modulus were increased in response to both GW9662 treatment and perfusion after 3 weeks of culture. Local delivery of GW9662 with drug-eluting microspheres had comparable effects to systemic delivery in the perfusate. Together, these results demonstrate a strategy to create a scaffold mimicking both organic and inorganic characteristics of anabolic bone and its potential as a bone graft.

Three-dimensional environment and vascularization induce osteogenic maturation of human adipose-derived stem cells comparable to that of bone-derived progenitors

While human adipose‐derived stem cells (hADSCs) are known to possess osteogenic differentiation potential, the bone tissues formed are generally considered rudimentary and immature compared with those made by bone‐derived precursor cells such as human bone marrow‐derived mesenchymal stem cells (hBMSCs) and less commonly studied human calvarium osteoprogenitor cells (hOPs). Traditional differentiation protocols have tended to focus on osteoinduction of hADSCs through the addition of osteogenic differentiation media or use of stimulatory bioactive scaffolds which have not resulted in mature bone formation. Here, we tested the hypothesis that by reproducing the physical as well as biochemical bone microenvironment through the use of three‐dimensional (3D) culture and vascularization we could enhance osteogenic maturation in hADSCs. In addition to biomolecular characterization, we performed structural analysis through extracellular collagen alignment and mineral density in our bone tissue engineered samples to evaluate osteogenic maturation. We further compared bone formed by hADSCs, hBMSCs, and hOPs against mature human pediatric calvarial bone, yet not extensively investigated. Although bone generated by all three cell types was still less mature than native pediatric bone, a fibrin‐based 3D microenvironment together with vascularization boosted osteogenic maturation of hADSC making it similar to that of bone‐derived osteoprogenitors. This demonstrates the important role of vascularization and 3D culture in driving osteogenic maturation of cells easily available but constitutively less committed to this lineage and suggests a crucial avenue for recreating the bone microenvironment for tissue engineering of mature craniofacial bone tissues from pediatric hADSCs, as well as hBMSCs and hOPs.

Overcoming the Design Challenge in 3D Biomimetic Hybrid Scaffolds for Bone and Osteochondral Regeneration by Factorial Design

Scaffolds for bone regeneration have been engineered by a plethora of manufacturing technologies and biomaterials. However, the performance of these systems is often limited by lack of robustness in the process design, that hampers their scalability to clinical application. In the present study, Design of Experiment (DoE) was used as statistical tool to design the biofabrication of hybrid hydroxyapatite (HA)/collagen scaffolds for bone regeneration and optimize their integration in a multilayer osteochondral device. The scaffolds were synthesized via a multi-step bioinspired process consisting in HA nano-crystals nucleation on the collagen self-assembling fibers and ribose glycation was used as collagen cross-linking method to modulate the mechanical and physical properties. The process design was performed by selecting hydrogel concentration, HA/collagen ratio and cross-linker content as key variables and the fabrication was carried out basing on a full factorial design. Scaffold performances were tested by evaluating porosity, swelling ratio, degradation rate and mechanical behavior as model output responses while physicochemical properties of the constructs were evaluated by TGA, ICP, FT-IR spectroscopy, and XRD analysis. Physicochemical characterizations confirmed the nucleation of a biomimetic inorganic phase and the interaction of the HA and collagenic components. The DoE model revealed a significant interaction between HA content and collagen cross-linking in determining porosity, swelling and mechanical properties of the scaffolds. The combined effect of hydrogel concentration and mineral phase played a key role on porosity and swelling while degradation resulted to be mainly affected by the HA loading and ribose content. The model was then used to determine the suitable input parameters for the synthesis of multi-layer scaffolds with graded mineralization rate, that can be used to mimic the whole cartilage-bone interface. This work proved that experimental design applied to complex biofabrication processes represents an effective and reliable way to design hybrid constructs with standardized and tunable properties for osteochondral tissue engineering.

Natural Polymeric Scaffolds in Bone Regeneration

Despite considerable advances in microsurgical techniques over the past decades, bone tissue remains a challenging arena to obtain a satisfying functional and structural restoration after damage. Through the production of substituting materials mimicking the physical and biological properties of the healthy tissue, tissue engineering strategies address an urgent clinical need for therapeutic alternatives to bone autografts. By virtue of their structural versatility, polymers have a predominant role in generating the biodegradable matrices that hold the cells in situ to sustain the growth of new tissue until integration into the transplantation area (i.e., scaffolds). As compared to synthetic ones, polymers of natural origin generally present superior biocompatibility and bioactivity. Their assembly and further engineering give rise to a wide plethora of advanced supporting materials, accounting for systems based on hydrogels or scaffolds with either fibrous or porous architecture. The present review offers an overview of the various types of natural polymers currently adopted in bone tissue engineering, describing their manufacturing techniques and procedures of functionalization with active biomolecules, and listing the advantages and disadvantages in their respective use in order to critically compare their actual applicability potential. Their combination to other classes of materials (such as micro and nanomaterials) and other innovative strategies to reproduce physiological bone microenvironments in a more faithful way are also illustrated. The regeneration outcomes achieved in vitro and in vivo when the scaffolds are enriched with different cell types, as well as the preliminary clinical applications are presented, before the prospects in this research field are finally discussed. The collection of studies herein considered confirms that advances in natural polymer research will be determinant in designing translatable materials for efficient tissue regeneration with forthcoming impact expected in the treatment of bone defects.

Drug-eluting PCL/graphene oxide nanocomposite scaffolds for enhanced osteogenic differentiation of mesenchymal stem cells

Recently, drug-eluting nanofibrous scaffolds have attracted a great attention to enhance the cell differentiation through biomimicking the extracellular matrix (ECM) in regenerative medicine. In this study, electrospun nanocomposite polycaprolactone (PCL)-based scaffolds containing synthesized graphene oxide (GO) nanosheets and osteogenic drugs, i.e. dexamethasone and simvastatin were fabricated. The physicochemical and surface properties of the scaffolds were investigated through FTIR, wettability, pH, and drug release studies. The cell viability, differentiation, and biomineralization were studied on mesenchymal stem cells (MSCs) by Alamar Blue, alkaline phosphatase (ALP) activity, and Alizarin Red-S staining, respectively. Uniformly distributed GO (thickness < 1 nm) in PCL nanofibers was observed by electron microscopy. It was revealed that the addition of GO and the drugs improved the hydrophilicity, cell viability, and osteogenic differentiation, in addition to pH changes, in comparison with PCL scaffolds. Despite the notable reduction in the cell viability, significant differentiation was revealed by ALP assay on PCL/GO-Dex scaffolds. Noteworthy, a twofold increase in the osteogenic differentiation was observed in comparison with the cells cultured in osteogenic differentiation medium, while a significant biomineralization was observed. The results of this study indicate the synergistic effect of GO and dexamethasone on improving osteogenic differentiation of drug-eluting nanocomposite scaffolds in bone tissue engineering applications.

A novel bovine serum albumin and sodium alginate hydrogel scaffold doped with hydroxyapatite nanowires for cartilage defects repair

Cartilage tissue engineering has become the trend of cartilage defect repair owing to the engineered biomimetic tissue that can mimic the structural, biological and functional characteristics of natural cartilage. Biomaterials with high biocompatibility and regeneration capacity are expected to be used in cartilage tissue engineering. Herein, in this study, a dual-network bovine serum albumin/sodium alginate with hydroxyapatite nanowires composite (B-S-H) hydrogel scaffold has been prepared for cartilage repair. The obtained B-S-H hydrogel scaffold exhibits ideal physical properties, such as excellent mechanical strength, high porosity and swelling ratio, as well as the excellent biological activity to promote the human bone marrow derived mesenchymal stem cells (hBMSCs) proliferation and differentiation. The in vivo study further shows that the B-S -H hydrogel scaffold can obviously promote the generation of new cartilage that integrates well with surrounding tissues and is similar to adjacent cartilage in terms of thickness. It is considered that the B-S-H hydrogel scaffold has great potential in the application of cartilage defects repair.

In vivo studies on osteoinduction: A systematic review on animal models, implant site, and type and postimplantation investigation

Musculoskeletal diseases involving loss of tissue usually require management with bone grafts, among which autografts are still the gold standard. To overcome autograft disadvantages, the development of new scaffolds is constantly increasing, as well as the number of in vivo studies evaluating their osteoinductivity in ectopic sites. The aim of the present systematic review is to evaluate the last 10 years of osteoinduction in vivo studies. The review is focused on: (a) which type of animal model is most suitable for osteoinduction evaluation; (b) what are the most used types of scaffolds; (c) what kind of post-explant evaluation is most used. Through three websites (www.pubmed.com, www.webofknowledge.com and www.embase.com), 77 in vivo studies were included. Fifty-eight studies were conducted in small animal models (rodents) and 19 in animals of medium or large size (rabbits, dogs, goats, sheep, and minipigs). Despite the difficulty in establishing the most suitable animal model for osteoinductivity studies, small animals (in particular mice) are the most utilized. Intramuscular implantation is more frequent than subcutis, especially in large animals, and synthetic scaffolds (especially CaP ceramics) are preferred than natural ones, also in combination with cells and growth factors. Paraffin histology and histomorphometric evaluations are usually employed for postimplantation analyses.

Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration

Natural bone is a mineralized biological material, which serves a supportive and protective framework for the body, stores minerals for metabolism, and produces blood cells nourishing the body. Normally, bone has an innate capacity to heal from damage. However, massive bone defects due to traumatic injury, tumor resection, or congenital diseases pose a great challenge to reconstructive surgery. Scaffold-based tissue engineering (TE) is a promising strategy for bone regenerative medicine, because biomaterial scaffolds show advanced mechanical properties and a good degradation profile, as well as the feasibility of controlled release of growth and differentiation factors or immobilizing them on the material surface. Additionally, the defined structure of biomaterial scaffolds, as a kind of mechanical cue, can influence cell behaviors, modulate local microenvironment and control key features at the molecular and cellular levels. Recently, nano/micro-assisted regenerative medicine becomes a promising application of TE for the reconstruction of bone defects. For this reason, it is necessary for us to have in-depth knowledge of the development of novel nano/micro-based biomaterial scaffolds. Thus, we herein review the hierarchical structure of bone, and the potential application of nano/micro technologies to guide the design of novel biomaterial structures for bone repair and regeneration.