Acidity-triggered charge-convertible nanoparticles that can cause bacterium-specific aggregation in situ to enhance photothermal ablation of focal infection

Physiological Microenvironment Dependent Self-Cross-Linking of Multifunctional Nanohybrid for Prolonged Antibacterial Therapy via Synergistic Chemodynamic-Photothermal-Biological Processes

Herein, a multifunctional nanohybrid (PL@HPFTM nanoparticles) was fabricated to perform the integration of chemodynamic therapy, photothermal therapy, and biological therapy over the long term at a designed location for continuous antibacterial applications. The PL@HPFTM nanoparticles consisted of a polydopamine/hemoglobin/Fe2+ nanocomplex with comodification of tetrazole/alkene groups on the surface as well as coloading of antimicrobial peptides and luminol in the core. During therapy, the PL@HPFTM nanoparticles would selectively cross-link to surrounding bacteria via tetrazole/alkene cycloaddition under chemiluminescence produced by the reaction between luminol and overexpressed H2O2 at the infected area. The resulting PL@HPFTM network not only significantly damaged bacteria by Fe2+-catalyzed ROS production, effective photothermal conversion, and sustained release of antimicrobial peptides but dramatically enhanced the retention time of these therapeutic agents for prolonged antibacterial therapy. Both in vitro and in vivo results have shown that our PL@HPFTM nanoparticles have much higher bactericidal efficiency and remarkably longer periods of validity than free antibacterial nanoparticles.

Engineering Platelet Membrane-Coated Bimetallic MOFs as Biodegradable Nanozymes for Efficient Antibacterial Therapy

Nanocatalytic-based wound therapeutics present a promising strategy for generating reactive oxygen species (ROS) to antipathogen to promote wound healing. However, the full clinical potential of these nanocatalysts is limited by their low reactivity, limited targeting ability, and poor biodegradability in the wound microenvironment. Herein, a bio-organic nanozyme is developed by encapsulating a FeZn-based bimetallic organic framework (MOF) (MIL-88B-Fe/Zn) in platelet membranes (PM@MIL-88B-Fe/Zn) for antimicrobial activity during wound healing. The introduction of Zn in MIL-88B-Fe/Zn modulates the electronic structure of Fe thus accelerating the catalytic kinetics of its peroxidase-like activity to catalytically generate powerful ROS. The platelet membrane coating of MOF innovatively enhanced the interaction between nanoparticles and the biological environment, further developing bacterial-targeted therapy with excellent antibacterial activity against both gram-positive and gram-negative bacteria. Furthermore, this nanozyme markedly suppressed the levels of inflammatory cytokines and promoted angiogenesis in vivo to effectively treat skin surface wounds and accelerate wound healing. PM@MIL-88B-Fe/Zn exhibited superior biodegradability, favourable metabolism and non-toxic accumulation, eliminating concerns regarding side effects from long-term exposure. The high catalytic reactivity, excellent targeting features, and biodegradability of these nanoenzymes developed in this study provide useful insights into the design and synthesis of nanocatalysts/nanozymes for practical biomedical applications.

Theranostic antibacterial hydrogel based on biopolymers cross-linked and doped with phytic acid from rice bran for wound healing

Theranostic antibacterial wound dressing is highly recommended in practical applications. The conventional methods of integrating diagnostic and therapeutic functions have the disadvantages of complicated preparation, mutual interference, inability to effectively broad spectrum antibacterial property, and easy to induce drug-resistant bacteria. Herein, a pH and light-responsive theranostic antibacterial hydrogel is developed by biopolymers polyvinyl alcohol (PVA) and polyaniline (PANI), and cross-linking with phytic acid (PA), which is widely present in rice bran. The biological polymer-based conductive hydrogel enables timely diagnosis and photothermal sterilization in-situ for wound healing. Because PANI is highly sensitive to pH changes in the bacterial microenvironment, the hydrogel can detect bacterial infections at concentrations as low as 103 CFU/mL. Subsequently, PANI absorbs near-infrared light to achieve on-demand exothermic sterilization (under 808 nm irradiation for 20 min, the killing ratios for Staphylococcus aureus and Escherichia coli reached almost 100 %). In addition, the hydrogel can monitor the intensity of joint movement to avoid wound re-tearing sensitively. In vitro cytotoxicity and hemocompatibility experiments and in vivo full-thickness infected wound model indicate that the hydrogel has good biocompatibility, antibacterial ability, and can accelerate the wound healing effectively. This work will promote the development of wearable electronic devices and precision medicine.

Surface Charge-Switchable Antifouling Block Copolymer with Bacteriostatic Properties

Zwitterionic polymers are an emerging family of effective, low-fouling materials that can withstand unintended interactions with biological systems while exhibiting enhanced activity in bacterial matrix deterioration and biofilm eradication. Herein, we modularly synthesized an amphiphilic block copolymer, ZABCP, featuring potential bacteriostatic properties composed of a charge-switchable polyzwitterionic segment and a redox-sensitive pendant disulfide-labeled polymethacrylate block. The leucine-appended polyzwitterionic segment with alternatively positioned cationic amine and anionic carboxylate functionalities undergoes charge alterations (+ve → 0 → -ve) on pH variation. By introducing appropriate amphiphilicity, ZABCP forms distinct vesicles with redox-sensitive bilayer membranes and zwitterionic shielding coronas, enabling switching of surface charge. ZABCP vesicles exhibit 180 ± 20 nm hydrodynamic diameter, and its charge switching behavior in response to pH was confirmed by the change of zeta potential value from -23 to +36 mV. The binding interaction between ZABCP vesicles with lysozyme and pepsin proteins strengthens when the surface charge shifts from neutral (pH 7.4) to either anionic or cationic. This surface-charge-switchable phenomenon paves the way for implementing cationic ZABCP vesicles for bacterial cell growth inhibition, which is shown by the pronounced transition of cellular morphology, including clustering, aggregation, or elongation as well as membrane disruption for both Bacillus subtilis (Gram-positive) and Escherichia coli (Gram-negative). Such enhanced bacteriostatic activity could be ascribed to a strong electrostatic interaction between cationic vesicles and negatively charged bacterial membranes, leading to cell membrane disruption. Overall, this study provides a tailor-made approach to adopt low-fouling properties and potential bacteriostatic activity using zwitterionic polymers through precise control of pH.

Electrochemical and Electrical Biosensors for Wearable and Implantable Electronics Based on Conducting Polymers and Carbon-Based Materials

Bioelectronic devices are designed to translate biological information into electrical signals and vice versa, thereby bridging the gap between the living biological world and electronic systems. Among different types of bioelectronics devices, wearable and implantable biosensors are particularly important as they offer access to the physiological and biochemical activities of tissues and organs, which is significant in diagnosing and researching various medical conditions. Organic conducting and semiconducting materials, including conducting polymers (CPs) and graphene and carbon nanotubes (CNTs), are some of the most promising candidates for wearable and implantable biosensors. Their unique electrical, electrochemical, and mechanical properties bring new possibilities to bioelectronics that could not be realized by utilizing metals- or silicon-based analogues. The use of organic- and carbon-based conductors in the development of wearable and implantable biosensors has emerged as a rapidly growing research field, with remarkable progress being made in recent years. The use of such materials addresses the issue of mismatched properties between biological tissues and electronic devices, as well as the improvement in the accuracy and fidelity of the transferred information. In this review, we highlight the most recent advances in this field and provide insights into organic and carbon-based (semi)conducting materials' properties and relate these to their applications in wearable/implantable biosensors. We also provide a perspective on the promising potential and exciting future developments of wearable/implantable biosensors.

Photo-Controlled Gating of Selective Bacterial Membrane Interaction and Enhanced Antibacterial Activity for Wound Healing

Reversible biointerfaces are essential for on-demand molecular recognition to regulate stimuli-responsive bioactivity such as specific interactions with cell membranes. The reversibility on a single platform allows the smart material to kill pathogens or attach/detach cells. Herein, we introduce a 2D-MoS2 functionalized with cationic azobenzene that interacts selectively with either Gram-positive or Gram-negative bacteria in a light-gated fashion. The trans conformation (trans-Azo-MoS2 ) selectively kills Gram-negative bacteria, whereas the cis form (cis-Azo-MoS2 ), under UV light, exhibits antibacterial activity against Gram-positive strains. The mechanistic investigation indicates that the cis-Azo-MoS2 exhibits higher affinity towards the membrane of Gram-positive bacteria compared to trans-Azo-MoS2 . In case of Gram-negative bacteria, trans-Azo-MoS2 internalizes more efficiently than cis-Azo-MoS2 and generates intracellular ROS to kill the bacteria. While the trans-Azo-MoS2 exhibits strong electrostatic interactions and internalizes faster into Gram-negative bacterial cells, cis-Azo-MoS2 primarily interacts with Gram-positive bacteria through hydrophobic and H-bonding interactions. The difference in molecular mechanism leads to photo-controlled Gram-selectivity and enhanced antibacterial activity. We found strain-specific and high bactericidal activity (minimal bactericidal concentration, 0.65 μg/ml) with low cytotoxicity, which we extended to wound healing applications. This methodology provides a single platform for efficiently switching between conformers to reversibly control the strain-selective bactericidal activity regulated by light.

Photothermal antibacterial materials to promote wound healing

Wound healing is a crucial process that restores the integrity and function of the skin and other tissues after injury. However, external factors, such as infection and inflammation, can impair wound healing and cause severe tissue damage. Therefore, developing new drugs or methods to promote wound healing is of great significance. Photothermal therapy (PTT) is a promising technique that uses photothermal agents (PTAs) to convert near-infrared radiation into heat, which can eliminate bacteria and stimulate tissue regeneration. PTT has the advantages of high efficiency, controllability, and low drug resistance. Hence, nanomaterial-based PTT and its related strategies have been widely explored for wound healing applications. However, a comprehensive review of PTT-related strategies for wound healing is still lacking. In this review, we introduce the physiological mechanisms and influencing factors of wound healing, and summarize the types of PTAs commonly used for wound healing. Then, we discuss the strategies for designing nanocomposites for multimodal combination treatment of wounds. Moreover, we review methods to improve the therapeutic efficacy of PTT for wound healing, such as selecting the appropriate wound dressing form, controlling drug release, and changing the infrared irradiation window. Finally, we address the challenges of PTT in wound healing and suggest future directions.

An integrated quorum quenching biocatalytic nanoplatform for synergistic chemo-photothermal eradication of P. aeruginosa biofilm infections

Decontamination of biofilm-associated infections presents a significant challenge due to the physical and chemical barrier created by the formation of extracellular matrices. This barrier restricts the access of antibiotics to the bacterial communities within the biofilm and provides protection to the persister cells, potentially leading to antibiotic resistance. In this study, we have developed an integrated quorum quenching biocatalytic nanoplatform for the synergistic chemo-photothermal eradication of P. aeruginosa biofilm infections. Ciprofloxacin (Cip), a model antibiotic, was absorbed onto PDA NPs through π-π stacking. Additionally, acylase (AC) was immobilized on PDA NPs through Schiff base reaction and Michael addition, resulting in the formation of the biocatalytic nanoplatform (PDA-Cip-AC NPs). This biocatalytic nanoplatform was able to enzymatically degrade AHL signaling molecules, thus achieving efficient quorum quenching activity to prevent biofilm formation. Furthermore, the NIR light-triggered on-demand Ciprofloxacin release further enhanced the eradication of P. aeruginosa biofilm infections with a synergy of local hyperthermia. We envision that this integrated quorum quenching nanoplatform provides a reliable tool for combating P. aeruginosa biofilm infections. STATEMENT OF SIGNIFICANCE: An integrated quorum quenching biocatalytic nanoplatform has been developed for the eradication of P. aeruginosa biofilm infections. Quorum-sensing signals play a crucial role in modulating bacterial cell-to-cell communication, biofilm formation, and secretion of virulence factors. This biocatalytic nanoplatform efficiently degrades AHL signaling molecules, thereby blocking cell-to-cell communication and preventing biofilm formation. Additionally, local hyperthermia and on-demand Ciprofloxacin release were achieved through NIR irradiation, working synergistically to eradicate P. aeruginosa biofilm infections.

Platelet-mimetic nano-sensor for combating postoperative recurrence and wound infection of triple-negative breast cancer

Tumor recurrence mainly triggered by tumor residual cells significantly contributes to mortality following breast tumor resection, and meanwhile post-surgical bacterial wound infections may accelerate tumor recurrence due to a series of infection-related complications. In this study, a nano-sensor system, Van-ICG@PLT, is constructed by a membrane camouflage and small molecule drug self-assembly strategy. This nano-sensor harnesses the innate tropism of platelets (PLT) to deliver vancomycin (Van) and indocyanine green (ICG) to surgical incisions, effectively eliminating both residual tumor cells and bacterial infections. Our findings demonstrate that Van-ICG@PLT preferentially accumulates at surgical wound. Under near-infrared (NIR) laser irradiation, Van-ICG@PLT exhibits significant cytotoxicity against 4T1 cells. Additionally, it is found to significantly promote ROS production thus inhibiting Staphylococcus aureus (S. aureus) growth, underscoring the synergistic benefits of phototherapy in combination with antibiotic treatment. In the 4T1 post-surgery recurrence mice model, Van-ICG@PLT is shown to efficiently ablate tumors in tumor-bearing mice (tumor inhibition rate of about 83%), and it demonstrates an excellent anti-infective effect in mice abscess models. Taken together, Van-ICG@PLT represents a promising paradigm in post-surgical adjuvant therapy (PAT). Its dual benefit in inhibiting cancer growth and promoting antibacterial activity makes Van-ICG@PLT a valuable addition to the existing arsenal of therapeutic options available for breast cancer patients.

Trends in Photothermal Nanostructures for Antimicrobial Applications

The rapid development of antimicrobial resistance due to broad antibiotic utilisation in the healthcare and food industries and the non-availability of novel antibiotics represents one of the most critical public health issues worldwide. Current advances in nanotechnology allow new materials to address drug-resistant bacterial infections in specific, focused, and biologically safe ways. The unique physicochemical properties, biocompatibility, and wide range of adaptability of nanomaterials that exhibit photothermal capability can be employed to develop the next generation of photothermally induced controllable hyperthermia as antibacterial nanoplatforms. Here, we review the current state of the art in different functional classes of photothermal antibacterial nanomaterials and strategies to optimise antimicrobial efficiency. The recent achievements and trends in developing photothermally active nanostructures, including plasmonic metals, semiconductors, and carbon-based and organic photothermal polymers, and antibacterial mechanisms of action, including anti-multidrug-resistant bacteria and biofilm removal, will be discussed. Insights into the mechanisms of the photothermal effect and various factors influencing photothermal antimicrobial performance, emphasising the structure-performance relationship, are discussed. We will examine the photothermal agents' functionalisation for specific bacteria, the effects of the near-infrared light irradiation spectrum, and active photothermal materials for multimodal synergistic-based therapies to minimise side effects and maintain low costs. The most relevant applications are presented, such as antibiofilm formation, biofilm penetration or ablation, and nanomaterial-based infected wound therapy. Practical antibacterial applications employing photothermal antimicrobial agents, alone or in synergistic combination with other nanomaterials, are considered. Existing challenges and limitations in photothermal antimicrobial therapy and future perspectives are presented from the structural, functional, safety, and clinical potential points of view.

Hybrid materials based on chitosan functionalized with green synthesized copper nanoparticles: Physico-chemical and antimicrobial analysis

Recently, the development of materials with antimicrobial properties has become a challenge under scrutiny. The incorporation of copper nanoparticles (NpCu) into a chitosan matrix appears to represent a viable strategy to contain the particles and prevent their oxidation. Regarding the physical properties, the nanocomposite films (CHCu) showed a decrease in the elongation at break (5 %) and an increase in the tensile strength of 10 % concerning chitosan films (control). They also showed solubility values lower than 5 % while the swelling diminished by 50 %, on average. The dynamical mechanical analysis (DMA) of nanocomposites revealed two thermal events located at 113° and 178 °C, which matched the glass transitions of the CH-enriched phase and nanoparticles-enriched phase, respectively. In addition, the thermogravimetric analysis (TGA) detected a greater stability of the nanocomposites. Chitosan films and the NpCu-loaded nanocomposites demonstrated excellent antibacterial capacity against Gram-negative and Gram-positive bacteria, proved through diffusion disc, zeta potential, and ATR-FTIR techniques. Additionally, the penetration of individual NpCu particles into bacterial cells and the leakage of cell content were verified by TEM. The mechanism of the antibacterial activity of the nanocomposites involved the interaction of chitosan with the bacterial outer membrane or cell wall and the diffusion of the NpCu through the cells. These materials could be applied in diverse fields of biology, medicine, or food packaging.

Biocompatible Glycol Chitosan Microgels as Effective Drug Carriers

Glycol chitosan (GC) is a chitosan (CH) derivative with improved water solubility with regards to CH which affords significant solubility advantages. In this study, microgels of GC as p(GC) were synthesized by a microemulsion technique at various crosslinking ratios e.g., 5%, 10%, 50%, 75%, and 150% based on the repeating unit of GC using divinyl sulfone (DVS) as a crosslinker. The prepared p(GC) microgels were tested for blood compatibility and it was found that p(GC) microgels at 1.0 mg/mL concentration possessed a 1.15 ± 0.1% hemolysis ratio and 89 ± 5% blood clotting index value confirming their hemocompatibility. In addition, p(GC) microgels were found biocompatible with 75.5 ± 5% cell viability against L929 fibroblasts even at a 2.0 mg/mL concentration. By loading and releasing tannic acid (TA) (a polyphenolic compound with high antioxidant activity) as an active agent, p(GC) microgels' possible drug delivery device application was examined. The TA loading amount of p(GC) microgels was determined as 323.89 mg/g, and TA releases from TA loaded microgels (TA@p(GC)) were found to be linear within 9 h and a total amount of TA released was determined as 42.56 ± 2 mg/g within 57 h. According to the Trolox equivalent antioxidant capacity (TEAC) test, 400 µL of the sample added to the ABTS+ solution inhibited 68.5 ± 1.7% of the radicals. On the other hand, the total phenol content (FC) test revealed that 2000 μg/mL of TA@p(GC) microgels resulted in 27.5 ± 9.5 mg/mL GA eq antioxidant properties.

Precise Localization and Simultaneous Bacterial Eradication of Biofilms Based on Nanocontainers with Successive Responsive Property toward pH and ATP

The bacterial colonization of surfaces and subsequent biofilm formation are a great threat in medical therapy and clinical diagnosis. The complex internal structure and composition sets an enormous obstacle for the localization and removal of biofilms. In this study, we proposed a novel biofilm-targeted nanocontainer with successive responsive property toward pH and ATP for precise localization and simultaneous bacterial eradication, with an acidic and adenosine triphosphate (ATP)-rich microenvironment within biofilms, formed due to the accumulation of fatty acids and ATP in the three-dimensional enclosed structure, integrated as two successive indicators to improve the precision of biofilm identification and removal. The biofilm-targeted nanocontainer was composed of a ATP-responsive zeolitic imidazolate framework-90 (ZIF-90) core loaded with Rho 6G and doxorubicin hydrochloride (DOX) encapsulated in the pH-responsive amorphous calcium carbonate/poly(acrylic acid) (ACC/PAA) shell. In the presence of biofilms, the ACC/PAA shell and ZIF-90 core were successively degraded by the accumulated H⁺ and ATP within biofilms, resulting in the release of fluorescence indicators and antimicrobial agents. On the other hand, to meet the application requirements of different biofilm scenarios, the pH response ability of the nanocontainers could be adjusted by changing the metallic ions (Ni²⁺, Zn²⁺, and Cu²⁺) doped into the structure of the ACC/PAA shell. Owing to excellent water dispersion of the pH/ATP double-responsive ZIF-90@Zn-ACC/PAA nanocontainer, precise localization and simultaneous bacterial eradication was successfully realized via a simple spray process. The successive pH/ATP two-step unlocking processes endowed the nanocontainers high precision for localization and simultaneous eradication of biofilms, which made the proposed nanocontainers high promising in food safety and medical treatment.

Photothermally Controlled Drug Release of Poly(d,l-lactide) Nanofibers Loaded with Indocyanine Green and Curcumin for Efficient Antimicrobial Photodynamic Therapy

Chronic wound infections with antibiotic-resistant bacteria have become a significant problem for modern healthcare systems since they are often associated with high costs and require profound topical wound management. Successful wound healing is achieved by reducing the bacterial load of the wound and providing an environment that enhances cell growth. In this context, nanofibers show remarkable success because their structure offers a promising drug delivery platform that can mimic the native extracellular matrix and accelerate cell proliferation. In our study, single-needle electrospinning, a versatile and cost-efficient technique, was used to shape polymers into an applicable and homogeneous fleece capable of a photothermally triggered drug release. It was combined with antimicrobial photodynamic therapy, a promising procedure against resistant bacteria. Therefore, poly(d,l-lactide) nanofibers loaded with curcumin and indocyanine green (ICG) were produced for local antimicrobial treatment. The mesh had a homogeneous structure, and the nanofibers showed a smooth surface. Recordings with a thermal camera showed that near-infrared light irradiation of ICG increased the temperature (>44 °C) in the surrounding medium. Release studies confirmed more than 29% enhanced curcumin release triggered by elevated temperature. The antimicrobial activity was tested against the gram-positive strain Staphylococcus saprophyticus subsp. bovis and the gram-negative strain Escherichia coli DH5 alpha. The nanofibers loaded with both photosensitizers and irradiated with both wavelengths reduced the bacterial viability (~4.4 log₁₀, 99.996%) significantly more than the nanofibers loaded with only one photosensitizer (<1.7 log₁₀, 97.828%) or irradiated with only one wavelength (<2.0 log₁₀, 98.952%). In addition, our formulation efficiently eradicated persistent adhered bacteria by >4.3 log₁₀ (99.995%), which was also confirmed visually. Finally, the produced nanofibers showed good biocompatibility, proven by the cellular viability of mouse fibroblasts (L929). The data demonstrate that we have developed a new economic nanofiber formulation, which offers a triggered drug release, excellent antimicrobial properties, and good biocompatibility.

Advances in image-guided drug delivery for antibacterial therapy

The emergence of antibiotic-resistant bacterial strains is seriously endangering the global healthcare system. There is an urgent need for combining imaging with therapies to realize the real-time monitoring of pathological condition and treatment progress. It also provides guidance on exploring new medicines and enhance treatment strategies to overcome the antibiotic resistance of existing conventional antibiotics. In this review, we provide a thorough overview of the most advanced image-guided approaches for bacterial diagnosis (e.g., computed tomography imaging, magnetic resonance imaging, photoacoustic imaging, ultrasound imaging, fluorescence imaging, positron emission tomography, single photon emission computed tomography imaging, and multiple imaging), and therapies (e.g., photothermal therapy, photodynamic therapy, chemodynamic therapy, sonodynamic therapy, immunotherapy, and multiple therapies). This review focuses on how to design and fabricate photo-responsive materials for improved image-guided bacterial theranostics applications. We present a potential application of different image-guided modalities for both bacterial diagnosis and therapies with representative examples. Finally, we highlighted the current challenges and future perspectives image-guided approaches for future clinical translation of nano-theranostics in bacterial infections therapies. We envision that this review will provide for future development in image-guided systems for bacterial theranostics applications.

Advanced Multifunctional Wound Dressing Hydrogels as Drug Carriers

Skin injuries, especially chronic wounds, remain a significant healthcare system problem. The number of burns, diabetic patients, pressure ulcers, and other damages is also growing, particularly in elderly populations. Several investigations are pursued in designing more effective therapeutics for treating different wound injuries. These efforts have resulted in developing multifunctional wound dressings to improve wound repair. For this, preparing multifunctional dressings using various methods has provided a new attitude to support effective skin regeneration. This review focuses on the recent developments in designing multifunctional hydrogel dressings with hemostasis, adhesiveness, antibacterial, and antioxidant properties.

Acidity-Activatable Nanoparticles with Glucose Oxidase-Enhanced Photoacoustic Imaging and Photothermal Effect, and Macrophage-Related Immunomodulation for Synergistic Treatment of Biofilm Infection

The pH-responsive theragnostics exhibit great potential for precision diagnosis and treatment of diseases. Herein, acidity-activatable nanoparticles of GB@P based on glucose oxidase (GO) and polyaniline are developed for treatment of biofilm infection. Catalyzed by GO, GB@P triggers the conversion of glucose into gluconic acid and hydrogen peroxide (H₂ O₂ ), enabling an acidic microenvironment-activated simultaneously enhanced photothermal (PT) effect/amplified photoacoustic imaging (PAI). The synergistic effects of the enhanced PT efficacy of GB@P and H₂ O₂ accelerate biofilm eradication because the penetration of H₂ O₂ into biofilm improves the bacterial sensitivity to heat, and the enhanced PT effect destroys the expressions of extracellular DNA and genomic DNA, resulting in biofilm destruction and bacterial death. Importantly, GB@P facilitates the polarization of proinflammatory M1 macrophages that initiates macrophage-related immunity, which enhances the phagocytosis of macrophages and secretion of proinflammatory cytokines, leading to a sustained bactericidal effect and biofilm eradication by the innate immunomodulatory effect. Accordingly, the nanoplatform of GB@P exhibits the synergistic effects on the biofilm eradication and bacterial residuals clearance through a combination of the enhanced PT effect with immunomodulation. This study provides a promising nanoplatform with enhanced PT efficacy and amplified PAI for diagnosis and treatment of biofilm infection.

Sweet light o' mine: Photothermal and photodynamic inactivation of tenacious pathogens using conjugated polymers

Each year a rising number of infections can not be successfully treated owing to the increasing pandemic of antibiotic resistant pathogens. The global shortage of innovative antibiotics fuels the emergence and spread of drug resistant microbes. Basic research, development, and applications of alternative therapies are urgently needed. Since the 90´s, light-mediated therapies have promised to be the next frontier combating multidrug-resistance microbes. These platforms have demonstrated to be a reliable, rapid, and efficient alternative to eliminate tenacious pathogens while avoiding the emergence of resistance mechanisms. Among the materials showing antimicrobial activity triggered by light, conjugated polymers (CPs) have risen as the most promising option to tackle this complex situation. These materials present outstanding characteristics such as high absorption coefficients, great photostability, easy processability, low cytotoxicity, among others, turning them into a powerful class of photosensitizer (PS)/photothermal agent (PTA) materials. Herein, we summarize and discuss the advances in the field of CPs with applications in photodynamic inactivation and photothermal therapy towards bacteria elimination. Additionally, a section of current challenges and needs in terms of well-defined benchmark experiments and conditions to evaluate the efficiency of phototherapies is presented.

Nanostructured Cu-doped TiO2 with photothermal effect for prevention of implant-associated infection

Bacterial infection of titanium (Ti) dental implants is still a major clinical complication. In this study, a combination of copper (Cu) ions and photothermal therapy is used to combat implant-associated infection. Cu doped TiO₂ (TiO₂-Cu) films were prepared on Ti by magnetron sputtering and subsequently annealing. TiO₂-Cu films had efficient photothermal conversion ability due to the generated nanostructure during the annealing process. Under the irradiation of 808 near infrared light, the combined actions of hyperthermia and Cu ions gave rise to excellent antibacterial activity against Streptococcus mutans on Ti as demonstrated by the experiments conducted in vitro and in vivo. The TiO₂-Cu films also exhibited excellent biocompatibility. In addition, the surface hardness and corrosion resistance of TiO₂-Cu films were greatly improved.

Organic photosensitizers for antimicrobial phototherapy

Microbial infectious diseases, especially those caused by new and antibiotic-resistant pathogenic microbes, have become a significant threat to global human health. As an antibiotic-free therapy, phototherapy is a promising approach to treat microbial infections due to its spatiotemporal selectivity, non-invasiveness, minimal side effects, and broad antimicrobial spectrum. Although organic photosensitizer-based antimicrobial phototherapy has been extensively studied over the last decade, there has been no specific review article on this topic yet. It is important and timely to summarize recent research progress in this field. This tutorial review highlights the concept and significance of phototherapy and summarizes innovative types of organic photosensitizers with design strategies to deal with microbial infections. In addition, examples of organic antimicrobial photosensitizers, including antibacterial photosensitizers, antiviral photosensitizers, and antifungal photosensitizers are discussed. Finally, current challenges and future directions of organic photosensitizer-based phototherapy for clinical antimicrobial applications are presented. We believe that this tutorial review will provide general guidance for the future development of efficient photosensitizers and encourage preclinical and clinical studies for phototherapy-mediated antimicrobial treatments.

Stimuli-Responsive Antibacterial Materials: Molecular Structures, Design Principles, and Biomedical Applications

Infections are regarded as the most severe complication associated with human health, which are urgent to be solved. Stimuli-responsive materials are appealing therapeutic platforms for antibacterial treatments, which provide great potential for accurate theranostics. In this review, the advantages, the response mechanisms, and the key design principles of stimuli-responsive antibacterial materials are highlighted. The biomedical applications, the current challenges, and future directions of stimuli-responsive antibacterial materials are also discussed. First, the categories of stimuli-responsive antibacterial materials are comprehensively itemized based on different sources of stimuli, including external physical environmental stimuli (e.g., temperature, light, electricity, salt, etc.) and bacterial metabolites stimuli (e.g., acid, enzyme, redox, etc.). Second, structural characteristics, design principles, and biomedical applications of the responsive materials are discussed, and the underlying interrelationships are revealed. The molecular structures and design principles are closely related to the sources of stimuli. Finally, the challenging issues of stimuli-responsive materials are proposed. This review will provide scientific guidance to promote the clinical applications of stimuli-responsive antibacterial materials.

Supramolecular Thermo-Contracting Adhesive Hydrogel with Self-Removability Simultaneously Enhancing Noninvasive Wound Closure and MRSA-Infected Wound Healing

Conventional wound closure and dressing are two crucial, time-consuming but isolated principles in wound care. Even though tissue adhesive opens a new era for wound closure, the method and biomaterial that can simultaneously achieve noninvasive wound closure and promote wound healing are highly appreciated. Herein, a novel supramolecular poly(N-isopropylacrylamide) hybrid hydrogel dressing composed of quaternized chitosan-graft-β-cyclodextrin, adenine, and polypyrrole nanotubes via host-guest interaction and hydrogen bonds is developed. The hydrogel demonstrates thermal contraction of 47% remaining area after 2 h at 37 ℃ and tissue adhesion of 5.74 kPa, which are essential for noninvasive wound closure, and multiple mechanical and biological properties including suitable mechanical properties, self-healing, on-demand removal, antioxidant, hemostasis, and photothermal/intrinsic antibacterial activity (higher 99% killing ratio within 5 min after irradiation). In both full-thickness skin incision and excision wound models, the hydrogel reveals significant wound closure after 24 h post-surgery. In acute and methicillin-resistant Staphylococcus aureus-infected wound and photothermal/intrinsic antibacterial activity assays, wounds treated with the hydrogel demonstrate enhanced wound healing with rapid wound closure rate, mild inflammatory response, advanced angiogenesis, and well-arranged collagen fibers. Altogether, the results indicate the hydrogel is promising in synchronously noninvasive wound closure and enhanced wound healing.

A carboxylatopillar[5]arene-based pH-triggering supramolecular photosensitizer for enhanced photodynamic antibacterial efficacy

A pH-triggering supramolecular antibacterial photosensitizer was constructed by host-guest interaction between a water-soluble porphyrin photosensitizer and carboxylatopillar[5]arene (P[5]). The formation of the supramolecular complex not only improves the biocompatibility of the photosensitizer, but also enhances antibacterial efficacy by pH-triggering dissociation under the low pH bacterial microenvironment.

Photoactivated Release of Nitric Oxide and Antimicrobial Peptide Derivatives for Synergistic Therapy of Bacterial Skin Abscesses

It is of paramount importance to develop novel approaches for combating bacterial resistance and the integration of different antibacterial mechanisms is essential to achieve synergistic bactericidal efficiency while reducing the associated side effects. Herein, amphiphilic antimicrobial copolymers derived from poly-l-lysine (PLL), black phosphorus quantum dots (BPQDs) as near-infrared (NIR) sensitizer, and S-nitrosocysteamine (SNO) as nitric oxide (NO) donor, are assembled into PELI@BPQD-SNO nanoparticles through electrostatic interactions. Amphiphilic copolymers with isopentanyl grafts on PLL at a ratio of 50% achieve an optimal balance between antibacterial activity and hemolysis rate. Photothermal effect of BPQDs leads to NIR-responsive release of NO and the combination with amphiphilic copolymers mutually enhances long-term inhibition of bacterial growth. In an S. aureus-infected subcutaneous abscess model, the bactericidal rate of PELI@BPQD-SNO/NIR treatment reaches nearly 99.6%, which is significantly higher than those without NO release (38%) or amphiphilic copolymers (24%) or NIR irradiation (17%). PELI@BPQD-SNO/NIR treatment shows full recovery of infected wounds, efficient retardation of inflammatory cells, and reconstruction of blood vessels similar to those of healthy skin. Therefore, the electrostatic assembly demonstrates a promising strategy to deliver charged therapeutic agents and the photoactivated release of NO and amphiphilic copolymers achieves synergistic antibacterial efficacy without using any antibiotics.

Silver Mesoporous Silica Nanoparticles: Fabrication to Combination Therapies for Cancer and Infection

The integration of silver nanoparticles (Ag NPs) with mesoporous silica nanoparticles (MSNs) protects the former from aggregation and promotes the controlled release of silver ions, resulting in therapeutic significance on cancer and infection. The unique size, shape, pore structure and silver distribution of silver mesoporous silica nanoparticles (Ag-MSNs) embellish them with the potential to perform combined imaging and therapeutic actions via modulating optical and drug release properties. Here, we comprehensively review the recent progress in the fabrication and application of Ag-MSNs for combination therapies for cancer and infection. We first elaborate on the fabrication of star-shaped structure, core-shell structure, and Janus structure Ag-MSNs. We then highlight Ag-MSNs as a multifunctional nanoplatform to surface-enhanced Raman scattering-based detection, non-photo-based cancer theranostics and photo-based cancer theranostics. In addition, we detail Ag-MSNs for combined antibacterial therapy via drug delivery and phototherapy. Overall, we summarize the challenges and future perspectives of Ag-MSNs that make them promising for diagnosis and therapy of cancer and infection.

A Polyaniline Nanoparticles Crosslinked Hydrogel with Excellent Photothermal Antibacterial and Mechanical Properties for Wound Dressing

Antibacterial hydrogel wound dressing is highly desirable in wound healing and infection control. However, the development of antibacterial hydrogels with controllable antibacterial properties and adequate mechanical properties without bacterial resistance and potential toxicity remains a challenge. Herein, a double bonds-ended polyaniline nanoparticle (Me-PANI NP) is synthesized, which can convert light energy into heat upon near-infrared (NIR) irradiation, and it is used as a novel photothermal antibacterial agent. The obtained bonds-ended Me-PANI NPs are subsequently involved in polyacrylamide (PAM) polymerization and served as chemical crosslinking points to form the Me-PANI NPs@PAM hydrogel, endowing the hydrogel with controllable photothermal antibacterial abilities upon NIR irradiation without time and space limit. Importantly, due to the energy dissipation of Me-PANI NPs under stretch, the Me-PANI NPs@PAM hydrogel achieves a maximum stretching ratio of 400% mechanical flexibility. The developed hydrogel can be potentially applied as a novel wound dressing to realize controllable treatment of bacterial infections and accelerate skin wound healing.

Conductive Biomaterials as Bioactive Wound Dressing for Wound Healing and Skin Tissue Engineering

Conductive biomaterials based on conductive polymers, carbon nanomaterials, or conductive inorganic nanomaterials demonstrate great potential in wound healing and skin tissue engineering, owing to the similar conductivity to human skin, good antioxidant and antibacterial activities, electrically controlled drug delivery, and photothermal effect. However, a review highlights the design and application of conductive biomaterials for wound healing and skin tissue engineering is lacking. In this review, the design and fabrication methods of conductive biomaterials with various structural forms including film, nanofiber, membrane, hydrogel, sponge, foam, and acellular dermal matrix for applications in wound healing and skin tissue engineering and the corresponding mechanism in promoting the healing process were summarized. The approaches that conductive biomaterials realize their great value in healing wounds via three main strategies (electrotherapy, wound dressing, and wound assessment) were reviewed. The application of conductive biomaterials as wound dressing when facing different wounds including acute wound and chronic wound (infected wound and diabetic wound) and for wound monitoring is discussed in detail. The challenges and perspectives in designing and developing multifunctional conductive biomaterials are proposed as well.

Encapsulation of Photothermal Nanoparticles in Stealth and pH-Responsive Micelles for Eradication of Infectious Biofilms In Vitro and In Vivo

Photothermal nanoparticles can be used for non-antibiotic-based eradication of infectious biofilms, but this may cause collateral damage to tissue surrounding an infection site. In order to prevent collateral tissue damage, we encapsulated photothermal polydopamine-nanoparticles (PDA-NPs) in mixed shell polymeric micelles, composed of stealth polyethylene glycol (PEG) and pH-sensitive poly(β-amino ester) (PAE). To achieve encapsulation, PDA-NPs were made hydrophobic by electrostatic binding of indocyanine green (ICG). Coupling of ICG enhanced the photothermal conversion efficacy of PDA-NPs from 33% to 47%. Photothermal conversion was not affected by micellar encapsulation. No cytotoxicity or hemolytic effects of PEG-PAE encapsulated PDA-ICG-NPs were observed. PEG-PAE encapsulated PDA-ICG-NPs showed good penetration and accumulation in a Staphylococcus aureus biofilm. Penetration and accumulation were absent when nanoparticles were encapsulated in PEG-micelles without a pH-responsive moiety. PDA-ICG-NPs encapsulated in PEG-PAE-micelles found their way through the blood circulation to a sub-cutaneous infection site after tail-vein injection in mice, yielding faster eradication of infections upon near-infrared (NIR) irradiation than could be achieved after encapsulation in PEG-micelles. Moreover, staphylococcal counts in surrounding tissue were reduced facilitating faster wound healing. Thus, the combined effect of targeting and localized NIR irradiation prevented collateral tissue damage while eradicating an infectious biofilm.

Enhancing the drug sensitivity of antibiotics on drug-resistant bacteria via the photothermal effect of FeTGNPs

The growing problem of bacterial resistance caused by the abuse of antibiotics is a serious challenge for the world. In order to make the clinically available antibiotics regain their bactericidal effect, our study introduced photothermal therapy (PTT) to assist antibiotics to annihilate drug-resistant bacteria. To achieve the synergistic effect, nanoparticles (FeTGNPs) with an antibiotic core (gatifloxacin complexing with tannins) and a photothermal shell (ferric iron coordinating with tannins) were prepared directly in aqueous solution by a convenient yet efficient one-pot synthesis. The excellent photothermal properties of the shell of FeTGNPs were used to break the mechanism of bacterial resistance, and the sustained-release of gatifloxacin from the core regained the killing effect against drug-resistant bacteria. From the results of antibacterial experiments, with the synergistic effect of APTT and antibiotics, FeTGNPs (400 μg/mL) could effectively kill methicillin-resistant Staphylococcus aureus (sterilizing rate up to 96.5 %) and gatifloxacin-resistant Staphylococcus aureus (sterilizing rate up to 98.7 %) than equivalent antibiotics. Moreover, under slightly acidic microenvironment, such as infection area, gatifloxacin could accelerate its release from the core of FeTGNPs. Therefore, FeTGNPs would be a highly effective antibacterial agent against drug-resistant bacterial infections in the future.

Organic Photo-antimicrobials: Principles, Molecule Design, and Applications

The emergence of multi-drug-resistant pathogens threatens the healthcare systems world-wide. Recent advances in phototherapy (PT) approaches mediated by photo-antimicrobials (PAMs) provide new opportunities for the current serious antibiotic resistance. During the PT treatment, reactive oxygen species or heat produced by PAMs would react with the cell membrane, consequently leaking cytoplasm components and effectively eradicating different pathogens like bacteria, fungi, viruses, and even parasites. This Perspective will concentrate on the development of different organic photo-antimicrobials (OPAMs) and their application as practical therapeutic agents into therapy for local infections, wound dressings, and removal of biofilms from medical devices. We also discuss how to design highly efficient OPAMs by modifying the chemical structure or conjugating with a targeting component. Moreover, this Perspective provides a discussion of the general challenges and direction for OPAMs and what further needs to be done. It is hoped that through this overview, OPAMs can prosper and will be more widely used for microbial infections in the future, especially at a time when the global COVID-19 epidemic is getting more serious.

Bioresponsive Nanoarchitectonics-Integrated Microneedles for Amplified Chemo-Photodynamic Therapy against Acne Vulgaris

The excessive colonization of Propionibacterium acnes (P. acnes) is responsible for the genesis of acne vulgaris, a common inflammatory disease of skin. However, the conventional anti-acne therapies are always limited by various side effects, drug resistance, and poor skin permeability. Microneedles (MNs) are emerging topical drug delivery systems capable of noninvasively breaking through the skin stratum corneum barrier to efficiently enhance the transdermal drug penetration. Herein, MNs loaded with intelligent pH-sensitive nanoplatforms were constructed for amplified chemo-photodynamic therapy against acne vulgaris, jointly exerting antimicrobial and anti-inflammatory effects. The photosensitizer indocyanine green (ICG) was loaded into the zeolitic imidazolate framework-8 (ZIF-8) to improve its photostability, which would be triggered by 808 nm laser irradiation to generate cytotoxic reactive oxygen species (ROS) to result in oxidative damage and disturbed metabolic activities of P. acnes. In addition to the efficient drug delivery, the ZIF-8 carrier could selectively degrade in response to the acidic microenvironment of acne lesions, and the released Zn2+ also exhibited a potent antimicrobial activity. The fabricated ZIF-8-ICG@MNs presented an outstanding synergistic anti-acne efficiency both in vitro and in vivo. This bioresponsive microneedle patch is expected to be readily adapted as a generalized, modular strategy for noninvasive therapeutics delivery against superficial skin diseases.

A multimodal antimicrobial platform based on MXene for treatment of wound infection

Featured with a three-dimensional network structure, electrostatic spinning nanofibrous membranes can maintain the hygroscopic balance in the wound place and promote the wound healing, thus have been extensively studied as a promising wound healing dressing. In this study, amoxicillin (AMX), MXene, and polyvinyl alcohol (PVA) were mixed and electrospun into an antibacterial nanofibrous membrane (MXene-AMX-PVA nanofibrous membrane). In the composite nanofibrous membrane, the PVA matrix could control the release of AMX to combat bacterial infection, while the MXene could transform the near-infrared laser into heat, leading to local hyperthermia to promote the AMX release. Meanwhile, the local hyperthermia could also destroy the noncellular components of bacteria and synergistically cause the bacterial inactivation. The bacteriostatic activity and wound healing ability of the composite nanofibrous membrane were systematically verified on the S. aureus in vitro and the S. aureus-infected mouse skin defect model in vivo. This membrane not only functioned as a physical barrier to co-load the AMX and MXene, but also exhibited the high antibacterial and accelerated wound healing capacity, which will advance the design of novel wound healing dressings and antibacterial strategies.

Fabrication of litchi-like lignin/zinc oxide composites with enhanced antibacterial activity and their application in polyurethane films

Lignin has been demonstrated to be green and effective for the modification of ZnO-based materials. In this work, quaternized lignin/zinc oxide nanostructured hybrid composites (QLS/ZnO NCs) were synthesized with good dispersion and uniform particle size via a facile hydrothermal method. Sodium lignosulfonate (LS) was modified by quaternization to endow the positive charges, which effectively captured bacteria due to the electrostatic interactions. Interestingly, QLS/ZnO NCs show a litchi-like morphology consisting of nanorods with diameters of 5-10 nm, which further resulted in damage to the bacterial cell membrane. Owing to the surface charge and rough surface topology for bacterial capture, QLS/ZnO NCs exhibited greatly enhanced antibacterial activity compared with bare ZnO. After being treated with QLS/ZnO NCs for 90 min, the sterilization rates of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reached 97.54% and 99.55%, respectively. Due to the reactive oxygen species (ROS) produced by ZnO under light irradiation, the antibacterial activity of QLS/ZnO NCs could be further enhanced. In addition, the minimal inhibition concentrations (MICs) of QLS/ZnO NCs towards E. coli and S. aureus were both 100 μg/mL, and the minimum bactericidal concentrations (MBCs) were 100 μg/mL and 200 μg/mL, respectively. Moreover, with the incorporation of QLS/ZnO NCs into polyurethane films, the composite films showed excellent antibacterial activity, strong tensile strength and enhanced ultraviolet light blocking performance.

Stimuli-Responsive Lysozyme Nanocapsule Engineered Microfiltration Membranes with a Dual-Function of Anti-Adhesion and Antibacteria for Biofouling Mitigation

Biofouling remains as a persistent problem impeding the applications of membranes for water and wastewater treatment. Green anti-biofouling of membranes made of natural and environmentally friendly materials and methods is a promising strategy to tackle this problem. Herein, we have developed a functionalized PVDF membrane with stimuli-responsive lysozyme nanocapsules (NCP). These nanocapsules can responsively release lysozyme according to environmental stimuli (pH and redox) induced by bacteria. Results showed that (i) the surface of the functionalized membrane with NCP had enhanced hydrophilicity, reduced roughness, and negative charge, (ii) a remarkable reduction of adsorption of proteins, polysaccharides, and bacteria was achieved by the functionalized membrane, and (iii) the colony forming unit (CFU) of bacteria on a membrane surface was reduced more than 80% within 24 h of contact. In addition, the NCP membrane showed excellent anti-biofouling activity regarding the bacterial viability being 12.5 and 8.3% on the membrane after filtration with 10⁸ CFU mL^-1 Escherichia coli and Staphylococcus aureus solution as feed, respectively. The coating layer and assembled nanocapsules endowed the membrane with improved lysozyme stability, anti-adhesion performance, and antibacterial activity. Stimuli-responsive lysozyme nanocapsule engineered microfiltration membranes show great potential for anti-biofouling in future practical application.

Photothermal nanoparticles for ablation of bacteria associated with kidney stones

OBJECTIVE

To determine whether photothermal polymer nanoparticles (NPs) can interface with bacteria associated with kidney stones, generate heat when stimulated with near infrared (NIR) light, and aid in reducing bacterial burden.

METHODS

Two types of kidney stones, artificial, and those removed during percutaneous nephrolithotomy (PCNL), were inoculated with Escherichia coli (E. coli) and then incubated with NPs composed of FITC-labeled Poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']-dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe). Association of the PCPDTBSe NPs was evaluated using fluorescence microscopy. Infected stones were incubated with NPs and exposed to 800 nm light to generate temperature increases from 25.4 to 68.6 °C on the stones. Following photothermal treatment, the stones were homogenized and the bacteria was enumerated via colony counting assays to evaluate the bactericidal effect. The photothermal effect was also evaluated using scanning electron microscopy of the treated biofilms.

RESULTS

Both kidney stone types sequestered E. coli. Control stones and stones treated with laser only had growth of numerous bacterial colonies, while stones exposed to NPs and laser grew significantly less, or none (p = 0.02).

CONCLUSIONS

The polymer NPs interface with E. coli on artificial and patient-derived kidney stones, and they can impart a bactericidal effect, when stimulated with NIR to generate heat. This technique may possibly be extended to treating infected kidney stones in patients.

Cationic chitosan@Ruthenium dioxide hybrid nanozymes for photothermal therapy enhancing ROS-mediated eradicating multidrug resistant bacterial infection

Antibiotic resistanceand biofilm formation are the main challenges of bacterial infectious diseases, and enhancing the permeability of drugs to biofilms may be a promising strategy. Herein, we constructed a cationic chitosan coated ruthenium dioxide nanozyme (QCS-RuO₂@RBT, SRT NSs)。RuO₂ nanosheets (RuO₂ NSs) are modified with positively charged Quaternary ammonium-chitosan (QCS) to improve biocompatibility, and enhance the interaction between RuO₂ nanozymes and bacterial membranes. An antibacterial drug, [Ru(bpy)₂(tip)]²⁺ (RBT) can be loaded onto QCS-RuO₂ by π-π stacking and hydrophobic interaction. SRT NSs exhibit NIR light enhanced peroxidase-like catalytic activity, thereby effectively fighting against planktonic bacteria and damaging biofilms. In the biofilm, extracellular DNA (eDNA) was cleaved by high levels of hydroxyl radicals (•OH) catalyzed by SRT NSs, thereby disrupting the rigid biofilm. In addition, in vivo studies demonstrate that SRT NSs can significantly rescue skin wound infections and the chronic lung infection in mice caused by P. aeruginosa, and hold the same therapeutic efficacy as first-line clinically anchored anti P. aeruginosa drug ciprofloxacin. Accordingly, the research work has realized the efficient production of ·OH, and the permeability of drugs to biofilms.it provides a promising response strategy for the management of biofilm-associated infections, including chronic lung infection.

Nanoparticles as therapeutic options for treating multidrug-resistant bacteria: research progress, challenges, and prospects

Resistance to antimicrobial agents has been alarming in recent years and poses a huge public health threat globally according to the WHO. The increase in morbidity and mortality resulting from microbial infections has been attributed to the emergence of multidrug-resistant microbes. Associated with the increase in multidrug resistance is the lack of new and effective antimicrobials. This has led to global initiatives to identify novel and more effective antimicrobial agents in addition to discovering novel and effective drug delivery and targeting methods. The use of nanoparticles as novel biomaterials to fully achieve this feat is currently gaining global attention. Nanoparticles could become an indispensable viable therapeutic option for treating drug-resistant infections. Of all the nanoparticles, the metals and metal oxide nanoparticles appear to offer the most promise and have attracted tremendous interest from many researchers. Moreover, the use of nanomaterials in photothermal therapy has received considerable attention over the years. This review provides current insight on antimicrobial resistance as well as the mechanisms of nanoparticle antibacterial activity. It offers an in-depth review of all the recent findings in the use of nanomaterials as agents against multi-resistant pathogenic bacteria. Also, nanomaterials that can respond to light stimuli (photothermal therapy) to kill microbes and facilitate enhanced drug delivery and release are discussed. Moreover, the synergistic interactions of nanoparticles with antibiotics and other nanomaterials, microbial adaptation strategies to nanoparticles, current challenges, and future prospects were extensively discussed.

Theranostic platforms for specific discrimination and selective killing of bacteria

Bacterial infections are serious threats to public health due to lack of advanced techniques to rapidly and accurately diagnose these infections in clinics. Although bacterial infections can be treated with broad-spectrum antibiotics based on empirical judgment, the emergence of antimicrobial resistance has attracted global attention due to long-term misuse and abuse of antibiotics by humans in recent decades. Therefore, it is imperative to selectively discriminate and precisely eliminate pathogenic bacteria. Herein, in addition to the conventional methods for bacterial identification, we comprehensively reviewed the recently developed theranostic platforms for specific discrimination and selective killing of bacteria according to their different interactions with the target bacteria, such as electrostatic and hydrophobic interactions, molecular recognition, microenvironment response, metabolic labeling, bacteriophage targeting, and others. These theranostic agents not only benefit from improved therapeutic efficiency but also present limited susceptibility to induce bacterial resistance. The strategies summarized in this review will open up new avenues in developing effective antimicrobial materials to accurately diagnose and treat bacterial infections in the post-antibiotic era. STATEMENT OF SIGNIFICANCE: Bacterial infections are difficult to be rapidly and accurately diagnosed, and are generally treated with broad-spectrum antibiotics, which leads to the development of drug resistance. By integrating imaging modalities and therapeutic methods in a single treatment, various theranostic agents have been developed to address the abovementioned issues. Therefore, the emerging theranostic platforms for selective identification and elimination of bacteria based on the distinct interactions of the theranostic agents with the target bacteria are summarized in this review. We believe that the information provided in this review will guide researchers in designing advanced antibacterial theranostics for practical applications in the post-antibiotic era.

The recent progress in photothermal-triggered bacterial eradication

Increasing evidence suggested that bacterial infection diseases posed a great threat to human health and became the leading cause of mortality. However, the abuse of antibiotics and their residues in the environment result in the emergence and prevalence of drug-resistant bacteria. Photothermal therapy (PTT) has received considerable attention owing to its noninvasiveness, and proved to be promising in preventing bacterial infection diseases. In this review, we first surveyed the recent progress of PTT-based responsive targeting strategies for bacterial killing. We then highlighted the PTT-based smart designs of bio-films, hydrogels and synergistic methods for treating bacterial infections. Existing challenges and perspectives are also discussed to inspire the future development of a PTT-based platform for the efficient therapy of bacterial infections.

Conductive Materials for Healing Wounds: Their Incorporation in Electroactive Wound Dressings, Characterization, and Perspectives

The use of conductive materials to promote the activity of electrically responsive cells is an effective means of accelerating wound healing. This article focuses on recent advancements in conductive materials, with emphasis on overviewing their incorporation with non-conducting polymers to fabricate electroactive wound dressings. The characteristics of these electroactive dressings are deliberated, and the mechanisms on how they accelerate the wound healing process are discussed. Potential directions for the future development of electroactive wound dressings and their potential in monitoring the course of wound healing in vivo concomitantly are also proposed.

Smart nanomicelles with bacterial infection-responsive disassembly for selective antimicrobial applications

Electrostatic nanomicelles remain stable and biocompatible under physiological conditions, but readily burst and spill out cationic antimicrobial peptide to kill bacteria at infection sites.

Stimulus-responsive nanocarriers for targeted drug delivery

Cancer is a multifactorial disease that involves unique tumor microenvironment (TEM) and abnormal organs with complex structures.

Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa is an opportunistic human pathogen causing devastating acute and chronic infections in individuals with compromised immune systems. Its highly notorious persistence in clinical settings is attributed to its ability to form antibiotic-resistant biofilms. Biofilm is an architecture built mostly by autogenic extracellular polymeric substances which function as a scaffold to encase the bacteria together on surfaces, and to protect them from environmental stresses, impedes phagocytosis and thereby conferring the capacity for colonization and long-term persistence. Here we review the current knowledge on P. aeruginosa biofilms, its development stages, and molecular mechanisms of invasion and persistence conferred by biofilms. Explosive cell lysis within bacterial biofilm to produce essential communal materials, and interspecies biofilms of P. aeruginosa and commensal Streptococcus which impedes P. aeruginosa virulence and possibly improves disease conditions will also be discussed. Recent research on diagnostics of P. aeruginosa infections will be investigated. Finally, therapeutic strategies for the treatment of P. aeruginosa biofilms along with their advantages and limitations will be compiled.