In vivo stem cell tracking with imageable nanoparticles that bind bioorthogonal chemical receptors on the stem cell surface

Engineered stem cell-based strategy: A new paradigm of next-generation stem cell product in regenerative medicine

Stem cells have garnered significant attention in regenerative medicine owing to their abilities of multi-directional differentiation and self-renewal. Despite these encouraging results, the market for stem cell products yields limited, which is largely due to the challenges faced to the safety and viability of stem cells in vivo. Besides, the fate of cells re-infusion into the body unknown is also a major obstacle to stem cell therapy. Actually, both the functional protection and the fate tracking of stem cells are essential in tissue homeostasis, repair, and regeneration. Recent studies have utilized cell engineering techniques to modify stem cells for enhancing their treatment efficiency or imparting them with novel biological capabilities, in which advances demonstrate the immense potential of engineered cell therapy. In this review, we proposed that the "engineered stem cells" are expected to represent the next generation of stem cell therapies and reviewed recent progress in this area. We also discussed potential applications of engineered stem cells and highlighted the most common challenges that must be addressed. Overall, this review has important guiding significance for the future design of new paradigms of stem cell products to improve their therapeutic efficacy.

Fluorescence-Based Mono- and Multimodal Imaging for In Vivo Tracking of Mesenchymal Stem Cells

The advancement of stem cell therapy has offered transformative therapeutic outcomes for a wide array of diseases over the past decades. Consequently, stem cell tracking has become significant in revealing the mechanisms of action and ensuring safe and effective treatments. Fluorescence stands out as a promising choice for stem cell tracking due to its myriad advantages, including high resolution, real-time monitoring, and multi-fluorescence detection. Furthermore, combining fluorescence with other tracking modalities-such as bioluminescence imaging (BLI), positron emission tomography (PET), photoacoustic (PA), computed tomography (CT), and magnetic resonance (MR)-can address the limitations of single fluorescence detection. This review initially introduces stem cell tracking using fluorescence imaging, detailing various labeling strategies such as green fluorescence protein (GFP) tagging, fluorescence dye labeling, and nanoparticle uptake. Subsequently, we present several combinations of strategies for efficient and precise detection.

Stem Cell-Derived Extracellular Vesicles for Cancer Therapy and Tissue Engineering Applications

Recently, stem cells and their secretomes have attracted great attention in biomedical applications, particularly extracellular vesicles (EVs). EVs are secretomes of cells for cell-to-cell communication. They play a role as intercellular messengers as they carry proteins, nucleic acids, lipids, and therapeutic agents. They have also been utilized as drug-delivery vehicles due to their biocompatibility, low immunogenicity, stability, targetability, and engineerable properties. The therapeutic potential of EVs can be further enhanced by surface engineering and modification using functional molecules such as aptamers, peptides, and antibodies. As a consequence, EVs hold great promise as effective delivery vehicles for enhancing treatment efficacy while avoiding side effects. Among various cell types that secrete EVs, stem cells are ideal sources of EVs because stem cells have unique properties such as self-renewal and regenerative potential for transplantation into damaged tissues that can facilitate their regeneration. However, challenges such as immune rejection and ethical considerations remain significant hurdles. Stem cell-derived EVs have been extensively explored as a cell-free approach that bypasses many challenges associated with cell-based therapy in cancer therapy and tissue regeneration. In this review, we summarize and discuss the current knowledge of various types of stem cells as a source of EVs, their engineering, and applications of EVs, focusing on cancer therapy and tissue engineering.

Capturing nascent extracellular vesicles by metabolic glycan labeling-assisted microfluidics

Extracellular vesicle (EV) secretion is a dynamic process crucial to cellular communication. Temporally sorting EVs, i.e., separating the newly-produced ones from the pre-existing, can allow not only deep understanding of EV dynamics, but also the discovery of potential EV biomarkers that are related to disease progression or responsible to drug intervention. However, the high similarity between the nascent and pre-existing EVs makes temporal separation extremely challenging. Here, by co-translational introduction of azido groups to act as a timestamp for click chemistry labelling, we develop a microfluidic-based strategy to enable selective isolation of nascent EVs stimulated by an external cue. In two mouse models of anti-PD-L1 immunotherapy, we demonstrate the strategy's feasibility and reveal the high positive correlation of nascent PD-L1+ EV level to tumor volume, suggesting an important role of nascent EVs in response to immunotherapy in cancer treatment.

Verification of Therapeutic Effect through Accelerator Mass Spectrometry-Based Single Cell Level Quantification of hESC-Endothelial Cells Distributed into an Ischemic Model

As the potential of pluripotent stem cell-derived differentiated cells has been demonstrated in regenerative medicine, differentiated vascular endothelial cells (ECs) are emerging as a therapeutic agent for the cardiovascular system. To verify the therapeutic efficacy of differentiated ECs in an ischemic model, human embryonic stem cells (hESCs) are induced as EC lineage and produce high-purity ECs through fluorescence-activated cell sorting (FACS). When hESC-ECs are transplanted into a hindlimb ischemic model, it is confirmed that blood flow and muscle regeneration are further improved by creating new blood vessels together with autologous ECs than the primary cell as cord blood endothelial progenitor cells (CB-EPCs). In addition, previously reported studies show the detection of transplanted cells engrafted in blood vessels through various tracking methods, but fail to provide accurate quantitative values over time. In this study, it is demonstrated that hESC-ECs are engrafted approximately sevenfold more than CB-EPCs by using an accelerator mass spectrometry (AMS)-based cell tracking technology that can perform quantification at the single cell level. An accurate quantification index is suggested. It has never been reported in in vivo kinetics of hESC-ECs that can act as therapeutic agents.

Surface-tethered ROS-responsive micelle backpacks for boosting mesenchymal stem cell vitality and modulating inflammation in ischemic stroke treatment

Mesenchymal stem cells (MSCs) exhibited remarkable therapeutic potential in ischemic stroke due to their exceptional immunomodulatory ability and paracrine effect; they have also been regarded as excellent neuroprotectant delivery vehicles with inflammatory tropism. However, the presence of high levels of reactive oxygen species (ROS) and an oxidative stress environment at the lesion site inhibits cell survival and further therapeutic effects. Using bioorthogonal click chemistry, ROS-responsive luteolin-loaded micelles were tethered to the surface of MSCs. As MSCs migrated to the ischemic brain, the micelles would achieve ROS-responsive release of luteolin to protect MSCs from excessive oxidative damage while inhibiting neuroinflammation and scavenging ROS to ameliorate ischemic stroke. This study provided an effective and prospective therapeutic strategy for ischemic stroke and a framework for a stem cell-based therapeutic system to treat inflammatory cerebral diseases.

In vivo toxicity evaluation of tumor targeted glycol chitosan nanoparticles in healthy mice: repeated high-dose of glycol chitosan nanoparticles potentially induce cardiotoxicity

BACKGROUND

Glycol chitosan nanoparticles (CNPs) have emerged as an effective drug delivery system for cancer diagnosis and treatment. Although they have great biocompatibility owing to biodegradable chemical structure and low immunogenicity, sufficient information on in vivo toxicity to understand the potential risks depending on the repeated high-dose have not been adequately studied. Herein, we report the results of in vivo toxicity evaluation for CNPs focused on the number and dose of administration in healthy mice to provide a toxicological guideline for a better clinical application of CNPs.

RESULTS

The CNPs were prepared by conjugating hydrophilic glycol chitosan with hydrophobic 5β-cholanic acid and the amphiphilic glycol chitosan-5β-cholanic acid formed self-assembled nanoparticles with its concentration-dependent homogeneous size distributions (265.36-288.3 nm) in aqueous condition. In cell cultured system, they showed significantly high cellular uptake in breast cancer cells (4T1) and cardiomyocytes (H9C2) than in fibroblasts (L929) and macrophages (Raw264.7) in a dose- and time-dependent manners, resulting in severe necrotic cell death in H9C2 at a clinically relevant highly concentrated condition. In particular, when the high-dose (90 mg/kg) of CNPs were intravenously injected into the healthy mice, considerable amount was non-specifically accumulated in major organs (liver, lung, spleen, kidney and heart) after 6 h of injection and sustainably retained for 72 h. Finally, repeated high-dose of CNPs (90 mg/kg, three times) induced severe cardiotoxicity accompanying inflammatory responses, tissue damages, fibrotic changes and organ dysfunction.

CONCLUSIONS

This study demonstrates that repeated high-dose CNPs induce severe cardiotoxicity in vivo. Through the series of toxicological assessments in the healthy mice, this study provides a toxicological guideline that may expedite the application of CNPs in the clinical settings.

Green Chemistry Principles for Nano- and Micro-Sized Hydrogel Synthesis

The growing demand for drug carriers and green-technology-based tissue engineering materials has enabled the fabrication of different types of micro- and nano-assemblies. Hydrogels are a type of material that have been extensively investigated in recent decades. Their physical and chemical properties, such as hydrophilicity, resemblance to living systems, swelling ability and modifiability, make them suitable to be exploited for many pharmaceutical and bioengineering applications. This review deals with a brief account of green-manufactured hydrogels, their characteristics, preparations, importance in the field of green biomedical technology and their future perspectives. Only hydrogels based on biopolymers, and primarily on polysaccharides, are considered. Particular attention is given to the processes of extracting such biopolymers from natural sources and the various emerging problems for their processing, such as solubility. Hydrogels are catalogued according to the main biopolymer on which they are based and, for each type, the chemical reactions and the processes that enable their assembly are identified. The economic and environmental sustainability of these processes are commented on. The possibility of large-scale processing in the production of the investigated hydrogels are framed in the context of an economy aimed at waste reduction and resource recycling.

Chemically engineering cells for precision medicine

Cell-based therapy holds great potential to address unmet medical needs and revolutionize the healthcare industry, as demonstrated by several therapeutics such as CAR-T cell therapy and stem cell transplantation that have achieved great success clinically. Nevertheless, natural cells are often restricted by their unsatisfactory in vivo trafficking and lack of therapeutic payloads. Chemical engineering offers a cost-effective, easy-to-implement engineering tool that allows for strengthening the inherent favorable features of cells and confers them new functionalities. Moreover, in accordance with the trend of precision medicine, leveraging chemical engineering tools to tailor cells to accommodate patients individual needs has become important for the development of cell-based treatment modalities. This review presents a comprehensive summary of the currently available chemically engineered tools, introduces their application in advanced diagnosis and precision therapy, and discusses the current challenges and future opportunities.

In Vivo Applications of Bioorthogonal Reactions: Chemistry and Targeting Mechanisms

Bioorthogonal chemistry involves selective biocompatible reactions between functional groups that are not normally present in biology. It has been used to probe biomolecules in living systems, and has advanced biomedical strategies such as diagnostics and therapeutics. In this review, the challenges and opportunities encountered when translating in vitro bioorthogonal approaches to in vivo settings are presented, with a focus on methods to deliver the bioorthogonal reaction components. These methods include metabolic bioengineering, active targeting, passive targeting, and simultaneously used strategies. The suitability of bioorthogonal ligation reactions and bond cleavage reactions for in vivo applications is critically appraised, and practical considerations such as the optimum scheduling regimen in pretargeting approaches are discussed. Finally, we present our own perspectives for this area and identify what, in our view, are the key challenges that must be overcome to maximise the impact of these approaches.

Resveratrol-loaded macrophage exosomes alleviate multiple sclerosis through targeting microglia

Despite exosome promise as endogenous drug delivery vehicles, the current understanding of exosome may be insufficient to develop their various applications. Here we synthesized five sialic acid analogues with different length N-acyl side chains and screened out the optimal metabolic precursor for exosome labeling via bio-orthogonal click chemistry. In proof-of-principle labeling experiments, exosomes derived from macrophages (RAW-Exo) strongly co-localized with central nervous system (CNS) microglia. Inspired by this discovery, we developed a resveratrol-loaded RAW-Exo formulation (RSV&Exo) for multiple sclerosis (MS) treatment. Intranasal administration of RSV&Exo significantly inhibited inflammatory responses in the CNS and peripheral system in a mouse model of MS and effectively improved the clinical evolution of MS in vivo. These findings suggested the feasibility and efficacy of engineered RSV&Exo administration for MS, providing a potential therapeutic strategy for CNS diseases.

Recent advances in developing active targeting and multi-functional drug delivery systems via bioorthogonal chemistry

Bioorthogonal chemistry reactions occur in physiological conditions without interfering with normal physiological processes. Through metabolic engineering, bioorthogonal groups can be tagged onto cell membranes, which selectively attach to cargos with paired groups via bioorthogonal reactions. Due to its simplicity, high efficiency, and specificity, bioorthogonal chemistry has demonstrated great application potential in drug delivery. On the one hand, bioorthogonal reactions improve therapeutic agent delivery to target sites, overcoming off-target distribution. On the other hand, nanoparticles and biomolecules can be linked to cell membranes by bioorthogonal reactions, providing approaches to developing multi-functional drug delivery systems (DDSs). In this review, we first describe the principle of labeling cells or pathogenic microorganisms with bioorthogonal groups. We then highlight recent breakthroughs in developing active targeting DDSs to tumors, immune systems, or bacteria by bioorthogonal chemistry, as well as applications of bioorthogonal chemistry in developing functional bio-inspired DDSs (biomimetic DDSs, cell-based DDSs, bacteria-based and phage-based DDSs) and hydrogels. Finally, we discuss the difficulties and prospective direction of bioorthogonal chemistry in drug delivery. We expect this review will help us understand the latest advances in the development of active targeting and multi-functional DDSs using bioorthogonal chemistry and inspire innovative applications of bioorthogonal chemistry in developing smart DDSs for disease treatment.

Copper-Free Click Chemistry: Applications in Drug Delivery, Cell Tracking, and Tissue Engineering

Traditionally, organic chemical reactions require organic solvents, toxic catalysts, heat, or high pressure. However, copper-free click chemistry has been shown to have favorable reaction rates and orthogonality in water, buffer solutions, and physiological conditions without toxic catalysts. Strain-promoted azide-alkyne cycloaddition and inverse electron-demand Diels-Alder reactions are representative of copper-free click chemistry. Artificial chemical reactions via click chemistry can also be used outside of the laboratory in a controllable manner on live cell surfaces, in the cytosol, and in living bodies. Consequently, copper-free click chemistry has many features that are of interest in biomedical research, and various new materials and strategies for its use have been proposed. Herein, recent remarkable trials that have used copper-free click chemistry are described, focusing on their applications in molecular imaging and therapy. The research is categorized as nanoparticles for drug delivery, imaging agents for cell tracking, and hydrogels for tissue engineering, which are rapidly advancing fields based on click chemistry. The content is based primarily on the experience with click chemistry-based biomaterials over the last 10 years.

Tracking Cell Viability for Adipose-Derived Mesenchymal Stem Cell-Based Therapy by Quantitative Fluorescence Imaging in the Second Near-Infrared Window

Cell survival rate determines engraftment efficiency in adipose-derived mesenchymal stem cell (ADSC)-based regenerative medicine. In vivo monitoring of ADSC viability to achieve effective tissue regeneration is a major challenge for ADSC therapy. Here, we developed an activated near-infrared II (NIR-II) fluorescent nanoparticle consisting of lanthanide-based down-conversion nanoparticles (DCNPs) and IR786s (DCNP@IR786s) for cell labeling and real-time tracking of ADSC viability in vivo. In dying ADSCs due to excessive ROS generation, absorption competition-induced emission of IR786s was destroyed, which could turn on the NIR-II fluorescent intensity of DCNPs at 1550 nm by 808 nm laser excitation. In contrast, the NIR-II fluorescent intensity of DCNPs was stable at 1550 nm by 980 nm laser excitation. This ratiometric fluorescent signal was precise and sensitive for tracking ADSC viability in vivo. Significantly, the nanoparticle could be applied to quantitively evaluate stem cell viability in real-time in vivo. Using this method, we successfully sought two small molecules including glutathione and dexamethasone that could improve stem cell engraftment efficiency and enhance ADSC therapy in a liver fibrotic mouse model. Therefore, we provide a potential strategy for real-time in vivo quantitative tracking of stem cell viability in ADSC therapy.

The Applications of Metabolic Glycoengineering

Mammalian cell membranes are decorated by the glycocalyx, which offer versatile means of generating biochemical signals. By manipulating the set of glycans displayed on cell surface, it is vital for gaining insight into the cellular behavior modulation and medical and biotechnological adhibition. Although genetic engineering is proven to be an effective approach for cell surface modification, the technique is only suitable for natural and genetically encoded molecules. To circumvent these limitations, non-genetic approaches are developed for modifying cell surfaces with unnatural but functional groups. Here, we review latest development of metabolic glycoengineering (MGE), which enriches the chemical functions of the cell surface and is becoming an intriguing new tool for regenerative medicine and tissue engineering. Particular emphasis of this review is placed on discussing current applications and perspectives of MGE.

Recent Advances in Bioorthogonal Click Chemistry for Biomedical Applications

Bioorthogonal click chemistry, first introduced in the early 2000s, has become one of the most widely used approaches for designing advanced biomaterials for applications in tissue engineering and regenerative medicine, due to the selectivity and biocompatibility of the associated reactants and reaction conditions. In this review, we present recent advances in utilizing bioorthogonal click chemistry for the development of three-dimensional, biocompatible scaffolds and cell-encapsulated biomaterials. Additionally, we highlight recent examples using these approaches for biomedical applications including drug delivery, imaging, and cell therapy and discuss their potential as next generation biomaterials.

Tracking of Oral and Craniofacial Stem Cells in Tissue Development, Regeneration, and Diseases

PURPOSE OF REVIEW

The craniofacial region hosts a variety of stem cells, all isolated from different sources of bone and cartilage. However, despite scientific advancements, their role in tissue development and regeneration is not entirely understood. The goal of this review is to discuss recent advances in stem cell tracking methods and how these can be advantageously used to understand oro-facial tissue development and regeneration.

RECENT FINDINGS

Stem cell tracking methods have gained importance in recent times, mainly with the introduction of several molecular imaging techniques, like optical imaging, computed tomography, magnetic resonance imaging, and ultrasound. Labelling of stem cells, assisted by these imaging techniques, has proven to be useful in establishing stem cell lineage for regenerative therapy of the oro-facial tissue complex. Novel labelling methods complementing imaging techniques have been pivotal in understanding craniofacial tissue development and regeneration. These stem cell tracking methods have the potential to facilitate the development of innovative cell-based therapies.

Click and Bioorthogonal Chemistry: The Future of Active Targeting of Nanoparticles for Nanomedicines?

Over the years, click and bioorthogonal reactions have been the subject of considerable research efforts. These high-performance chemical reactions have been developed to meet requirements not often provided by the chemical reactions commonly used today in the biological environment, such as selectivity, rapid reaction rate, and biocompatibility. Click and bioorthogonal reactions have been attracting increasing attention in the biomedical field for the engineering of nanomedicines. In this review, we study a compilation of articles from 2014 to the present, using the terms "click chemistry and nanoparticles (NPs)" to highlight the application of this type of chemistry for applications involving NPs intended for biomedical applications. This study identifies the main strategies offered by click and bioorthogonal chemistry, with respect to passive and active targeting, for NP functionalization with specific and multiple properties for imaging and cancer therapy. In the final part, a novel and promising approach for "two step" targeting of NPs, called pretargeting (PT), is also discussed; the principle of this strategy as well as all the studies listed from 2014 to the present are presented in more detail.

Covalent and Noncovalent Conjugation of Degradable Polymer Nanoparticles to T Lymphocytes

Cells are attractive as carriers that can help to enhance control over the biodistribution of polymer nanomedicines. One strategy to use cells as carriers is based on the cell surface immobilization of the nanoparticle cargo. While a range of strategies can be used to immobilize nanoparticles on cell surfaces, only limited effort has been made to investigate the effect of these surface modification chemistries on cell viability and functional properties. This study has explored seven different approaches for the immobilization of poly(lactic acid) (PLA) nanoparticles on the surface of two different T lymphocyte cell lines. The cell lines used were human Jurkat T cells and CD4⁺ T_EM cells. The latter cells possess blood-brain barrier (BBB) migratory properties and are attractive for the development of cell-based delivery systems to the central nervous system (CNS). PLA nanoparticles were immobilized either via covalent active ester-amine, azide-alkyne cycloaddition, and thiol-maleimide coupling, or via noncovalent approaches that use lectin-carbohydrate, electrostatic, or biotin-NeutrAvidin interactions. The cell surface immobilization of the nanoparticles was monitored with flow cytometry and confocal microscopy. By tuning the initial nanoparticle/cell ratio, T cells can be decorated with up to ∼185 nanoparticles/cell as determined by confocal microscopy. The functional properties of the nanoparticle-decorated cells were assessed by evaluating their binding to ICAM-1, a key protein involved in the adhesion of CD4⁺ T_EM cells to the BBB endothelium, as well as in a two-chamber model in vitro BBB migration assay. It was found that the migratory behavior of CD4⁺ T_EM cells carrying carboxylic acid-, biotin-, or Wheat germ agglutinin (WGA)-functionalized nanoparticles was not affected by the presence of the nanoparticle payload. In contrast, however, for cells decorated with maleimide-functionalized nanoparticles, a reduction in the number of migratory cells compared to the nonmodified control cells was observed. Investigating and understanding the impact of nanoparticle-cell surface conjugation chemistries on the viability and properties of cells is important to further improve the design of cell-based nanoparticle delivery systems. The results of this study present a first step in this direction and provide first guidelines for the surface modification of T cells, in particular in view of their possible use for drug delivery to the CNS.

Bioorthogonally surface-edited extracellular vesicles based on metabolic glycoengineering for CD44-mediated targeting of inflammatory diseases

Extracellular vesicles (EVs) are essential mediators in intercellular communication that have emerged as natural therapeutic nanomedicines for the treatment of intractable diseases. Their therapeutic applications, however, have been limited by unpredictable in vivo biodistribution after systemic administration. To control the in vivo fate of EVs, their surfaces should be properly edited, depending on the target site of action. Herein, based on bioorthogonal copper‐free click chemistry (BCC), surface‐edited EVs were prepared by using metabolically glycoengineered cells. First, the exogenous azide group was generated on the cellular surface through metabolic glycoengineering (MGE) using the precursor. Next, PEGylated hyaluronic acid, capable of binding specifically to the CD44‐expressing cells, was labelled as the representative targeting moiety onto the cell surface by BCC. The surface‐edited EVs effectively accumulated into the target tissues of the animal models with rheumatoid arthritis and tumour, primarily owing to prolonged circulation in the bloodstream and the active targeting mechanism. Overall, these results suggest that BCC combined with MGE is highly useful as a simple and safe approach for the surface modification of EVs to modulate their in vivo fate.

Nanoparticles and bioorthogonal chemistry joining forces for improved biomedical applications

Bioorthogonal chemistry comprises chemical reactions that can take place inside complex biological environments, providing outstanding tools for the investigation and elucidation of biological processes. Its use in combination with nanotechnology can lead to further developments in diverse areas of biomedicine, such as molecular bioimaging, targeted delivery, in situ drug activation, study of cell-nanomaterial interactions, biosensing, etc. Here, we summarise the recent efforts to bring together the unique properties of nanoparticles and the remarkable features of bioorthogonal reactions to create a toolbox of new or improved biomedical applications. We show how, by joining forces, bioorthogonal chemistry and nanotechnology can overcome some of the key current limitations in the field of nanomedicine, providing better, faster and more sensitive nanoparticle-based bioimaging and biosensing techniques, as well as therapeutic nanoplatforms with superior efficacy.

Covalent cell surface recruitment of chemotherapeutic polymers enhances selectivity and activity

Synthetic macromolecular chemotherapeutics inspired by host defence peptides can disrupt cell membranes and are emerging as agents for the treatment of cancer and infections. However, their off-target effects remain a major unmet challenge. Here we introduce a covalent recruitment strategy, whereby metabolic oligosaccharide engineering is used to label targeted cells with azido glycans, to subsequently capture chemotherapeutic polymers by a bio-orthogonal click reaction. This results in up to 10-fold reduction in EC50 and widening of the therapeutic window. Cell death is induced by not only membrane leakage, but also by apoptosis due to the conjugated chemotherapeutic being internalised by glycan recycling. Covalent recruitment also lead to increased penetration and significant cell death in a 3-D tumour model in just 3 hours, whereas doxorubicin required 24 hours. This conceptual approach of 'engineering cells to capture polymers' rather than 'engineering polymers to target cells' will bring new opportunities in non-traditional macromolecular therapeutics.

In vivo tracking of 14C thymidine labeled mesenchymal stem cells using ultra-sensitive accelerator mass spectrometry

Despite the tremendous advancements made in cell tracking, in vivo imaging and volumetric analysis, it remains difficult to accurately quantify the number of infused cells following stem cell therapy, especially at the single cell level, mainly due to the sensitivity of cells. In this study, we demonstrate the utility of both liquid scintillator counter (LSC) and accelerator mass spectrometry (AMS) in investigating the distribution and quantification of radioisotope labeled adipocyte derived mesenchymal stem cells (AD-MSCs) at the single cell level after intravenous (IV) transplantation. We first show the incorporation of ¹⁴C-thymidine (5 nCi/ml, 24.2 ng/ml) into AD-MSCs without affecting key biological characteristics. These cells were then utilized to track and quantify the distribution of AD-MSCs delivered through the tail vein by AMS, revealing the number of AD-MSCs existing within different organs per mg and per organ at different time points. Notably, the results show that this highly sensitive approach can quantify one cell per mg which effectively means that AD-MSCs can be detected in various tissues at the single cell level. While the significance of these cells is yet to be elucidated, we show that it is possible to accurately depict the pattern of distribution and quantify AD-MSCs in living tissue. This approach can serve to incrementally build profiles of biodistribution for stem cells such as MSCs which is essential for both research and therapeutic purposes.

Intracellular Uptake Mechanism of Bioorthogonally Conjugated Nanoparticles on Metabolically Engineered Mesenchymal Stem Cells

Nanoparticles have been used for effectively delivering imaging agents and therapeutic drugs into stem cells. However, nanoparticles are not sufficiently internalized into stem cells; thus, new delivery method of nanoparticles into stem cells is urgently needed. Herein, we develop bicyclo[6.1.0]nonyne (BCN)-conjugated gold nanoparticles (BCN-AuNPs), which can be bioorthogonally conjugated to azide (-N₃) groups on the surface of metabolically engineered stem cells via bioorthogonal click chemistry. For incorporating azide groups on the cell surface, first, human adipose-derived mesenchymal stem cells (hMSCs) were metabolically engineered with N-azidoacetylmannosamine-tetraacylated (Ac₄ManNAz). Second, clickable BCN-AuNPs were bioorthogonally conjugated to azide groups on Ac₄ManNAz-treated hMSCs. Importantly, a large amount of BCN-AuNPs was specifically conjugated to metabolically engineered hMSCs and then internalized rapidly into stem cells through membrane turnover mechanism, compared to the conventional nanoparticle-derived endocytosis mechanism. Furthermore, BCN-AuNPs entrapped in endosomal/lysosomal compartment could escape efficiently to the cytoplasm of metabolically engineered stem cells. Finally, BCN-AuNPs in stem cells were very safe, and they did not affect stem cell functions, such as self-renewal and differentiation capacity. These bioorthogonally conjugated nanoparticles on metabolically engineered stem cells can enhance the cellular uptake of nanoparticles via bioorthogonal conjugation mechanism.

In vivo tracking of bioorthogonally labeled T-cells for predicting therapeutic efficacy of adoptive T-cell therapy

Non-invasive tracking of T-cells may help to predict the patient responsiveness and therapeutic outcome. Herein, we developed bioorthogonal T-cell labeling and tracking strategy using bioorthogonal click chemistry. First, ovalbumin (OVA) antigen-specific cytotoxic T-cells (CTLs) were incubated with N-azidoacetyl-D-mannosamine-tetraacylated (Ac₄ManNAz) for incorporating azide (N₃) groups on the surface of CTLs via metabolic glycoengineering. Subsequently, azide groups on the CTLs were chemically labeled with near infrared fluorescence (NIRF) dye, Cy5.5, conjugated dibenzylcyclooctyne (DBCO-Cy5.5) via bioorthogonal click chemistry, resulting in Cy5.5-labeled CTLs (Cy5.5-CTLs). The labeling efficiency of Cy5.5-CTLs could be readily controlled by changing concentrations of Ac₄ManNAz and DBCO-Cy5.5 in cultured cells. Importantly, Cy5.5-CTLs presented the strong NIRF signals in vitro and they showed no significant changes in the functional properties, such as cell viability, proliferation, and antigen-specific cytolytic activity. In ovalbumin (OVA)-expressing E.G-7 tumor-bearing immune-deficient mice, intravenously injected Cy5.5-CTLs were clearly observed at targeted solid tumors via non-invasive NIRF imaging. Moreover, tumor growth inhibition of E.G-7 tumors was closely correlated with the intensity of NIRF signals from Cy5.5-CTLs at tumors after 2-3 days post-injection. The Cy5.5-CTLs showed different therapeutic responses in E.G-7 tumor-bearing immune-competent mice, in which they were divided by their tumor growth efficacy as 'high therapeutic response (TR (+))' and 'low therapeutic response (TR (-))'. These different therapeutic responses of Cy5.5-CTLs were highly correlated with the NIRF signals of Cy5.5-CTLs at targeted tumor tissues in the early stage. Therefore, non-invasive tracking of T-cells can be able to predict and elicit therapeutic responses in the adoptive T-cell therapy.

Anticancer drug-loaded mesenchymal stem cells for targeted cancer therapy

Mesenchymal stem cells (MSCs) have a tumor-homing ability-they accumulate inside tumors after systemic injection, and may thus be useful as carriers for tumor-targeting therapy. To use MSCs effectively as an anti-cancer therapy, they must first be functionalized with a large amount of anti-cancer drugs without causing any significant changes to their tumor-tropism. In the present study, we attempted to modify the cell surface of MSCs with doxorubicin-loaded liposomes (DOX-Lips), using the avidin-biotin complex method, and evaluated delivery efficiency and anti-tumor efficacy of DOX-Lip-modified MSCs. The amount of DOX in DOX-Lip-modified C3H10T1/2 cells, a murine mesenchymal stem cell line, was approximately 21.5 pg per cell, with no significant changes to the tumor-tropism of C3H10T1/2 cells. Notably, DOX-Lip-modified C3H10T1/2 cells significantly suppressed the proliferation of firefly luciferase-expressing murine colon adenocarcinoma colon26/fluc cells, compared to DOX-Lips alone. Fluorescent DOX accumulated at the cell contact surface and inside green fluorescence protein-expressing colon26 (colon26/GFP) in co-cultures of DOX-Lip-modified C3H10T1/2 and colon26/GFP cells. This localized distribution was not observed when only DOX-Lips was added to colon26/GFP cells. These results suggest that DOX-Lips are efficiently delivered from DOX-Lip-modified C3H10T1/2 cells to the neighboring colon26 cells. Furthermore, DOX-Lip-modified C3H10T1/2 cells suppressed tumor growth in subcutaneous tumor-bearing mice, and in a lung metastasis mouse model. Taken together, these results indicate that the intercellular delivery of DOX may be enhanced using DOX-Lip-modified MSCs as an efficient carrier system for targeted tumor therapy.

Predicting in vivo therapeutic efficacy of bioorthogonally labeled endothelial progenitor cells in hind limb ischemia models via non-invasive fluorescence molecular tomography

Human embryonic stem cells-derived endothelial progenitor cells (hEPCs) were utilized as cell therapeutics for the treatment of ischemic diseases. However, in vivo tracking of hEPCs for predicting their therapeutic efficacy is very difficult. Herein, we developed bioorthogonal labeling strategy of hEPCs that could non-invasively track them after transplantation in hind limb ischemia models. First, hEPCs were treated with tetraacylated N-azidomannosamine (Ac₄ManNAz) for generating unnatural azide groups on the hEPCs surface. Second, near-infrared fluorescence (NIRF) dye, Cy5, conjugated dibenzocylooctyne (DBCO-Cy5) was chemically conjugated to the azide groups on the hEPC surface via copper-free click chemistry, resulting Cy5-hEPCs. The bioorthogonally labeled Cy5-hEPCs showed strong NIRF signal without cytotoxicity and functional perturbation in tubular formation, oxygen consumption and paracrine effect of hEPCs in vitro. In hind limb ischemia models, the distribution and migration of transplanted Cy5-hEPCs were successfully monitored via fluorescence molecular tomography (FMT) for 28 days. Notably, blood reperfusion and therapeutic neovascularization effects were significantly correlated with the initial transplantation forms of Cy5-hEPCs such as 'condensed round shape' and 'spread shape' in the ischemic lesion. The condensed transplanted Cy5-hEPCs substantially increased the therapeutic efficacy of hind limb ischemia, compared to that of spread Cy5-hEPCs. Therefore, our new stem cell labeling strategy can be used to predict therapeutic efficacy in hind limb ischemia and it can be applied a potential application in developing cell therapeutics for regenerative medicine.

7-T MRI tracking of mesenchymal stromal cells after lung injection in a rat model

Background

Mesenchymal stromal cells (MSCs) are able to migrate and engraft at sites of inflammation, injuries, and tumours, but little is known about their fate after local injection. The purpose of this study is to perform MSC tracking, combining in vivo 7-T magnetic resonance imaging (MRI) and histological assessment, following lung injection in a rat model.

Methods

Five lungs were injected with ferumoxide-labelled MSCs and five with perfluorocarbon-labelled MSCs and underwent 7-T MRI. MRI acquisitions were recorded immediately (T₀), at 24 h (T₂₄) and/or 48 h (T₄₈) after injection. For each rat, labelled cells were assessed in the main organs by MRI. Target organs were harvested under sterile conditions from rats sacrificed 0, 24, or 48 h after injection and fixed for histological analysis via confocal and structured illumination microscopy.

Results

Ferumoxide-labelled MSCs were not detectable in the lungs, whereas they were not visible in the distant sites. Perfluorocarbon-labelled MSCs were seen in 5/5 injected lungs at T₀, in 1/2 at T₂₄, and in 1/3 at T₄₈. The fluorine signal in the liver was seen in 3/5 at T₀, in 1/2 at T24, and in 2/3 at T₄₈. Post-mortem histology confirmed the presence of MSCs in the injected lung.

Conclusions

Ferumoxide-labelled cells were not seen at distant sites; a linear decay of injected perfluorocarbon-labelled MSCs was observed at T₀, T₂₄, and T₄₈ in the lung. In more than half of the experiments, perfluorocarbon-labelled MSCs scattering to the liver was observed, with a similar decay over time as observed in the lung.

100th Anniversary of Macromolecular Science Viewpoint: Re-Engineering Cellular Interfaces with Synthetic Macromolecules Using Metabolic Glycan Labeling

Cell-surface functionality is largely programmed by genetically encoded information through modulation of protein expression levels, including glycosylation enzymes. Genetic tools enable control over protein-based functionality, but are not easily adapted to recruit non-native functionality such as synthetic polymers and nanomaterials to tune biological responses and attach therapeutic or imaging payloads. Similar to how polymer-protein conjugation evolved from nonspecific PEGylation to site-selective bioconjugates, the same evolution is now occurring for polymer-cell conjugation. This Viewpoint discusses the potential of using metabolic glycan labeling to install bio-orthogonal reactive cell-surface anchors for the recruitment of synthetic polymers and nanomaterials to cell surfaces, exploring the expanding therapeutic and diagnostic potential. Comparisons to conventional approaches that target endogenous membrane components, such as hydrophobic, protein coupling and electrostatic conjugation, as well as enzymatic and genetic tools, have been made to highlight the huge potential of this approach in the emerging cellular engineering field.

Design of experiment (DoE)-driven in vitro and in vivo uptake studies of exosomes for pancreatic cancer delivery enabled by copper-free click chemistry-based labelling

Exosomes (Exo)-based therapy holds promise for treatment of lethal pancreatic cancer (PC). Limited understanding of key factors affecting Exo uptake in PC cells restricts better design of Exo-based therapy. This work aims to study the uptake properties of different Exo by PC cells. Exo from pancreatic carcinoma, melanoma and non-cancer cell lines were isolated and characterised for yield, size, morphology and exosomal marker expression. Isolated Exo were fluorescently labelled using a novel in-house developed method based on copper-free click chemistry to enable intracellular tracking and uptake quantification in cells. Important factors influencing Exo uptake were initially predicted by Design of Experiments (DoE) approach to facilitate subsequent actual experimental investigations. Uptake of all Exo types by PC cells (PANC-1) showed time- and dose-dependence as predicted by the DoE model. PANC-1 cell-derived exosomes (PANC-1 Exo) showed significantly higher uptake in PANC-1 cells than that of other Exo types at the longest incubation time and highest Exo dose. In vivo biodistribution studies in subcutaneous tumour-bearing mice similarly showed favoured accumulation of PANC-1 Exo in self-tissue (i.e. PANC-1 tumour mass) over the more vascularised melanoma (B16-F10) tumours, suggesting intrinsic tropism of PC-derived Exo for their parent cells. This study provides a simple, universal and reliable surface modification approach via click chemistry for in vitro and in vivo exosome uptake studies and can serve as a basis for a rationalised design approach for pre-clinical Exo cancer therapies.

Near-infrared light controlled fluorogenic labeling of glycoengineered sialic acids in vivo with upconverting photoclick nanoprobe

Sialic acid serves as an important determinant for profiling cell activities in diverse biological and pathological processes. The precise control of sialic acid labeling to visualize its biological pathways under endogenous conditions is significant but still challenging due to the lack of reliable methods. Herein, we developed an effective strategy to spatiotemporally label thesialic acids with a near-infrared (NIR) light activated upconverting nanoprobe (Tz-UCNP). With this photoclickable nanoprobe and a stable N-alkene-d-mannosamine (Ac4ManNIPFA), metabolically synthesized alkene sialic acids on the cell surface were labeled and imaged in real time through fluorogenic cycloaddition. More importantly, we achieved spatially selective visualization of sialic acids in specific tumor tissues of the mice under NIR light activation in a spatially controlled manner. This in situ controllable labeling strategy thus enables the metabolic labeling of specific sialic acids in complex biological systems.

In Situ One-Step Fluorescence Labeling Strategy of Exosomes via Bioorthogonal Click Chemistry for Real-Time Exosome Tracking In Vitro and In Vivo

Exosomes are cellular components with promising uses in cancer diagnostics and therapeutics, and their imaging and tracking are essential to study their biological properties. Herein, we report on an in situ one-step fluorescence labeling strategy for exosomes via bioorthogonal click chemistry. First, exosome donor cancer cells were treated with tetraacetylated N-azidoacetyl-d-mannosamine (Ac₄ManNAz) to generate unnatural azide groups (-N₃) on their surface via metabolic glycoengineering. Then, the azide groups were labeled with near-infrared fluorescent dye-conjugated dibenzylcyclooctyne (DBCO-Cy5) via bioorthogonal click chemistry. After 2 days of incubation, the DBCO-Cy5-labeled exosomes (Cy5-Exo) were successfully secreted from the donor cancer cells and were isolated via classical ultracentrifugation, providing a high-yield of fluorescent dye-labeled exosomes. This in situ one-step bioorthogonal click chemistry offers improved labeling efficiency, biocompatibility, and imaging sensitivy compared to standard exosomes (ST-Exo), purified with classical ultracentrifugation or carbocyanine lipophilic dye (DiD)-labeled exosomes (DiD-Exo) in vitro. In particular, the Cy5-Exo were successfully taken up by A549 cells in a time-dependent manner, and they could escape from lysosome confinement, showing their possible use as a delivery carrier of therapeutic drugs or imaging agents. Finally, intraveneously injected Cy5-Exo were noninvasively tracked and imaged via near-infrared fluorescence (NIRF) imaging in tumor-bearing mice. This new fluorescence labeling strategy for natural exosomes may be useful to provide better understanding of their theranostic effects in many biomedical applications.

Bio-orthogonal click-targeting nanocomposites for chemo-photothermal synergistic therapy in breast cancer

Chemo-photothermal synergistic treatment has a high potential to complement traditional cancer therapy and amplify its outcome. Precision in the delivery of these therapeutic agents to tumor cells has been indicated as being key to maximizing their therapeutic effects. Method: We developed a bio-orthogonal copper-free click-targeting nanocomposite system (DLQ/DZ) that markedly improved specific co-delivery of the chemotherapeutic agent doxorubicin and the photosensitizer zinc phthalocyanine to breast cancer cells via a two-step mechanism. In the first step, an azide-modified sugar (tetraacetylated N-azidoacetyl-D-mannosamine, Ac4ManNAz) was injected intratumorally for glycoengineering of the tumor cell surface. Subsequently, DLQ/DZ was administered to achieve tumor enrichment via bio-orthogonal copper-free click-targeting. Results: During the first step in our experiments, high density azide groups (3.23×107/cell) were successfully glycoengineered on the surface of tumor cells following Ac4ManNAz administration in vitro. Subsequently, the highly efficient bio-orthogonal click chemical reaction between receptor-like azide groups on tumor cells and DBCO on nanocomposites significantly enhanced the cellular uptake and tumor-specific distribution (4.6x increase) of the nanocomposites in vivo. Importantly, Ac4ManNAz+DLQ/DZ treatment augmented the anti-cancer effect of combined chemotherapy and PTT (96.1% inhibition rate), nearly ablating the tumor. Conclusions: This bio-orthogonal click-targeting combination strategy may provide a promising treatment approach for surficial breast cancers.

Cell Tracking in Cancer Immunotherapy

The impressive development of cancer immunotherapy in the last few years originates from a more precise understanding of control mechanisms in the immune system leading to the discovery of new targets and new therapeutic tools. Since different stages of disease progression elicit different local and systemic inflammatory responses, the ability to longitudinally interrogate the migration and expansion of immune cells throughout the whole body will greatly facilitate disease characterization and guide selection of appropriate treatment regiments. While using radiolabeled white blood cells to detect inflammatory lesions has been a classical nuclear medicine technique for years, new non-invasive methods for monitoring the distribution and migration of biologically active cells in living organisms have emerged. They are designed to improve detection sensitivity and allow for a better preservation of cell activity and integrity. These methods include the monitoring of therapeutic cells but also of all cells related to a specific disease or therapeutic approach. Labeling of therapeutic cells for imaging may be performed in vitro, with some limitations on sensitivity and duration of observation. Alternatively, in vivo cell tracking may be performed by genetically engineering cells or mice so that may be revealed through imaging. In addition, SPECT or PET imaging based on monoclonal antibodies has been used to detect tumors in the human body for years. They may be used to detect and quantify the presence of specific cells within cancer lesions. These methods have been the object of several recent reviews that have concentrated on technical aspects, stressing the differences between direct and indirect labeling. They are briefly described here by distinguishing ex vivo (labeling cells with paramagnetic, radioactive, or fluorescent tracers) and in vivo (in vivo capture of injected radioactive, fluorescent or luminescent tracers, or by using labeled antibodies, ligands, or pre-targeted clickable substrates) imaging methods. This review focuses on cell tracking in specific therapeutic applications, namely cell therapy, and particularly CAR (Chimeric Antigen Receptor) T-cell therapy, which is a fast-growing research field with various therapeutic indications. The potential impact of imaging on the progress of these new therapeutic modalities is discussed.

Advanced Bottom-Up Engineering of Living Architectures

Bottom-up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom-up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular-rich structures or multicomponent cell-biomaterial synergies are described. An up-to-date critical overview of long-term existing and rapidly emerging technologies for integrative bottom-up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell-biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

On-chip label-free determination of cell survival rate

Cell survival rate (CSR) is a very important parameter in biological and medical fields. Today, the routine method to determine this parameter is time-consuming; it also makes the labeled cells no longer useable for subsequent experiments. Here, we developed an on-chip label-free method for determining the CSR. For the method, a hypertonic stimulus was designed to create volume differences between living and dead cells, and then, the differences were characterized with measurements of impedance as the cells flowed through two electrodes. Based on the method, a microfluidic hypertonic stimulus-based impedance flow cytometry chip (HSIFC) was designed, and the localized function of the HSIFC was verified. Finally, the performance of the HSIFC was confirmed by measuring the different CSRs for the different types of cells. The results show that the HSIFC can accurately determine the CSR, and the accuracy is comparable to that of flow cytometry. This work paves the way for the label-free evaluation of CSR after various cell manipulations and treatments on the chip and promotes the versatility of lab-on-a-chip devices.

Dual-Modal Imaging-Guided Precise Tracking of Bioorthogonally Labeled Mesenchymal Stem Cells in Mouse Brain Stroke

Noninvasive and precise stem cell tracking after transplantation in living subject is very important to monitor both stem cell destinations and their in vivo fate, which is closely related to their therapeutic efficacy. Herein, we developed bicyclo[6.1.0]nonyne (BCN)-conjugated glycol chitosan nanoparticles (BCN-NPs) as a delivery system of dual-modal stem cell imaging probes. Near-infrared fluorescent (NIRF) dye Cy5.5 was chemically conjugated to the BCN-NPs, and then oleic acid-coated superparamagnetic iron oxide nanoparticles (OA-Fe₃O₄ NPs) were encapsulated into BCN-NPs, resulting in Cy5.5-labeled and OA-Fe₃O₄ NP-encapsulated BCN-NPs (BCN-dual-NPs). For bioorthogonal labeling of human adipose-derived mesenchymal stem cells (hMSCs), first, hMSCs were treated with tetra-acetylated N-azidoacetyl-d-mannosamine (Ac₄ManNAz) for generating azide (-N₃) groups onto their surface via metabolic glycoengineering. Second, azide groups on the cell surface were successfully chemically labeled with BCN-dual-NPs via bioorthogonal click chemistry in vitro. This bioorthogonal labeling of hMSCs could greatly increase the cell labeling efficiency, safety, and imaging sensitivity, compared to only nanoparticle-derived labeling technology. The dual-modal imaging-guided precise tracking of bioorthogonally labeled hMSCs was tested in the photothrombotic stroke mouse model via intraparenchymal injection. Finally, BCN-dual-NPs-labeled hMSCs could be effectively tracked by their migration from the implanted site to the brain stroke lesion using NIRF/T₂-weighted magnetic resonance (MR) dual-modal imaging for 14 days. Our observation would provide a potential application of bioorthogonally labeled stem cell imaging in regenerative medicine by providing safety and high labeling efficiency in vitro and in vivo.

Silica-Coated Magnetic Nanoparticles Decrease Human Bone Marrow-Derived Mesenchymal Stem Cell Migratory Activity by Reducing Membrane Fluidity and Impairing Focal Adhesion

For stem cell-based therapies, the fate and distribution of stem cells should be traced using non-invasive or histological methods and a nanomaterial-based labelling agent. However, evaluation of the biophysical effects and related biological functions of nanomaterials in stem cells remains challenging. Here, we aimed to investigate the biophysical effects of nanomaterials on stem cells, including those on membrane fluidity, using total internal reflection fluorescence microscopy, and traction force, using micropillars of human bone marrow-derived mesenchymal stem cells (hBM-MSCs) labelled with silica-coated magnetic nanoparticles incorporating rhodamine B isothiocyanate (MNPs@SiO₂(RITC)). Furthermore, to evaluate the biological functions related to these biophysical changes, we assessed the cell viability, reactive oxygen species (ROS) generation, intracellular cytoskeleton, and the migratory activity of MNPs@SiO₂(RITC)-treated hBM-MSCs. Compared to that in the control, cell viability decreased by 10% and intracellular ROS increased by 2-fold due to the induction of 20% higher peroxidized lipid in hBM-MSCs treated with 1.0 µg/µL MNPs@SiO₂(RITC). Membrane fluidity was reduced by MNPs@SiO₂(RITC)-induced lipid oxidation in a concentration-dependent manner. In addition, cell shrinkage with abnormal formation of focal adhesions and ~30% decreased total traction force were observed in cells treated with 1.0 µg/µL MNPs@SiO₂(RITC) without specific interaction between MNPs@SiO₂(RITC) and cytoskeletal proteins. Furthermore, the migratory activity of hBM-MSCs, which was highly related to membrane fluidity and cytoskeletal abnormality, decreased significantly after MNPs@SiO₂(RITC) treatment. These observations indicated that the migratory activity of hBM-MSCs was impaired by MNPs@SiO₂(RITC) treatment due to changes in stem-cell biophysical properties and related biological functions, highlighting the important mechanisms via which nanoparticles impair migration of hBM-MSCs. Our findings indicate that nanoparticles used for stem cell trafficking or clinical applications should be labelled using optimal nanoparticle concentrations to preserve hBM-MSC migratory activity and ensure successful outcomes following stem cell localisation.

Exploiting metabolic glycoengineering to advance healthcare

Metabolic glycoengineering (MGE) is a technique for manipulating cellular metabolism to modulate glycosylation. MGE is used to increase the levels of natural glycans and, more importantly, to install non-natural monosaccharides into glycoconjugates. In this Review, we summarize the chemistry underlying MGE that has been developed over the past three decades and highlight several recent advances that have set the stage for clinical translation. In anticipation of near-term application to human healthcare, we describe emerging efforts to deploy MGE in diverse applications, ranging from the glycoengineering of biotherapeutic proteins and the diagnosis and treatment of complex diseases such as cancer to the development of new immunotherapies.

Recent advances in the use of fluorescent nanoparticles for bioimaging

Rapid and recent progress in fluorescence microscopic techniques has allowed for routine discovery and viewing of biological structures and processes in unprecedented spatiotemporal resolution. In these imaging techniques, fluorescent nanoparticles (NPs) play important roles in the improvement of reporting systems. A short overview of recently developed fluorescent NPs used for advanced in vivo imaging will be discussed in this mini-review. The discussion begins with the contribution of fluorescence imaging in exploring the fate of NPs in biological systems. NP applications for in vivo imaging, including cell labeling, multimodal imaging and theranostic agents, are then discussed. Finally, despite all of the advancements in bioimaging, some unsolved challenges will be briefly discussed concerning future research directions.

Click Chemistry as a Tool for Cell Engineering and Drug Delivery

Click chemistry has great potential for use in binding between nucleic acids, lipids, proteins, and other molecules, and has been used in many research fields because of its beneficial characteristics, including high yield, high specificity, and simplicity. The recent development of copper-free and less cytotoxic click chemistry reactions has allowed for the application of click chemistry to the field of medicine. Moreover, metabolic glycoengineering allows for the direct modification of living cells with substrates for click chemistry either in vitro or in vivo. As such, click chemistry has become a powerful tool for cell transplantation and drug delivery. In this review, we describe some applications of click chemistry for cell engineering in cell transplantation and for drug delivery in the diagnosis and treatment of diseases.

Safety and Optimization of Metabolic Labeling of Endothelial Progenitor Cells for Tracking

Metabolic labeling is one of the most powerful methods to label the live cell for in vitro and in vivo tracking. However, the cellular mechanisms by modified glycosylation due to metabolic agents are not fully understood. Therefore, metabolic labeling has not yet been widely used in EPC tracking and labeling. In this study, cell functional properties such as proliferation, migration and permeability and gene expression patterns of metabolic labeling agent-treated hUCB-EPCs were analyzed to demonstrate cellular effects of metabolic labeling agents. As the results, 10 μM Ac4ManNAz treatment had no effects on cellular function or gene regulations, however, higher concentration of Ac4ManNAz (>20 μM) led to the inhibition of functional properties (proliferation rate, viability and rate of endocytosis) and down-regulation of genes related to cell adhesion, PI3K/AKT, FGF and EGFR signaling pathways. Interestingly, the new blood vessel formation and angiogenic potential of hUCB-EPCs were not affected by Ac4ManNAz concentration. Based on our results, we suggest 10 μM as the optimal concentration of Ac4ManNAz for in vivo hUCB-EPC labeling and tracking. Additionally, we expect that our approach can be used for understanding the efficacy and safety of stem cell-based therapy in vivo.

"Clicking" Gene Therapeutics: A Successful Union of Chemistry and Biomedicine for New Solutions

The use of nucleic acid, DNA and RNA, based strategies to disrupt gene expression as a therapeutic is quickly emerging. Indeed, synthetic oligonucleotides represent a major component of modern gene therapeutics. However, the efficiency and specificity of intracellular uptake for nonmodified oligonucleotides is rather poor. Utilizing RNA based oligonucleotides as therapeutics is even more challenging to deliver, due to extremely fast enzymatic degradation of the RNAs. RNAs get rapidly degraded in vivo and demonstrate large off-target binding events when they can reach and enter the desired target cells. One approach that holds much promise is the utilization of "click chemistry" to conjugate receptor or cell specific targeting molecules directly to the effector oligonucleotides. We discuss here the applications of the breakthrough technology of CuAAC click chemistry and the immense potential in utilizing "click chemistry" in the development of new age targeted oligonucleotide therapeutics.

Efficient Route to Label Mesenchymal Stromal Cell-Derived Extracellular Vesicles

Recent research results report that extracellular vesicles (EVs) have a central role in both physiological and pathological processes involving intercellular communication. Herein, a simple EVs labeling procedure based on the metabolic labeling of secreting cells (mesenchymal stroma cells, MSCs) with a fluorescein-containing bio-orthogonal dye is described. This procedure was carried out by incubating cells for 72 h with tetraacetylated N-azidoacetyl-d-mannosamine (Ac₄ManNAz), a modified sugar containing an azido group that, upon incorporation on the external surface of the cytoplasmatic cell membrane, is specifically conjugated with cyclooctyne-modified fluorescein isothiocyanate (ADIBO-FITC). MSCs released fluorescent EVs did not need any further purification. Finally, cellular uptake and tracking of the fluorescein-labeled EVs were successfully assessed by targeting experiments with MSCs. The method appears of general applicability and it may be very useful opening new horizon on diagnostic and therapeutic protocols exploiting EVs.

Stem Cell Tracing Through MR Molecular Imaging

Stem cell therapy opens a new window in medicine to overcome several diseases that remain incurable. It appears such diseases as cardiovascular disorders, brain injury, multiple sclerosis, urinary system diseases, cartilage lesions and diabetes are curable with stem cell transplantation. However, some questions related to stem cell therapy have remained unanswered. Stem cell imaging allows approval of appropriated strategies such as selection of the type and dose of stem cell, and also mode of cell delivery before being tested in clinical trials. MRI as a non-invasive imaging modality provides proper conditions for this aim. So far, different contrast agents such as superparamagnetic or paramagnetic nanoparticles, ultrasmall superparamagnetic nanoparticles, fluorine, gadolinium and some types of reporter genes have been used for imaging of stem cells. The core subject of these studies is to investigate the survival and differentiation of stem cells, contrast agent's toxicity and long term following of transplanted cells. The promising results of in vivo and some clinical trial studies may raise hope for clinical stem cells imaging with MRI.