Stem cell spheroids incorporating fibers coated with adenosine and polydopamine as a modular building blocks for bone tissue engineering

In vitro vascularization of 3D cell aggregates in microwells with integrated vascular beds

Most human tissues possess vascular networks supplying oxygen and nutrients. Engineering of functional tissue and organ models or equivalents often require the integration of artificial vascular networks. Several approaches, such as organs on chips and three-dimensional (3D) bioprinting, have been pursued to obtain vasculature and vascularized tissues in vitro. This technical feasibility study proposes a new approach for the in vitro vascularization of 3D microtissues. For this, we thermoform arrays of round-bottom microwells into thin non-porous and porous polymer films/membranes and culture vascular beds on them from which endothelial sprouting occurs in a Matrigel-based 3D extra cellular matrix. We present two possible culture configurations for the microwell-integrated vascular beds. In the first configuration, human umbilical vein endothelial cells (HUVECs) grow on and sprout from the inner wall of the non-porous microwells. In the second one, HUVECs grow on the outer surface of the porous microwells and sprout through the pores toward the inside. These approaches are extended to lymphatic endothelial cells. As a proof of concept, we demonstrate the in vitro vascularization of spheroids from human mesenchymal stem cells and MG-63 human osteosarcoma cells. Our results show the potential of this approach to provide the spheroids with an abundant outer vascular network and the indication of an inner vasculature.

Cardiac Matrix-Derived Granular Hydrogel Enhances Cell Function in 3D Culture

Hydrogels derived from decellularized porcine myocardial matrix have demonstrated significant potential as therapeutic delivery platforms for promoting cardiac repair after injury. Our previous study developed a fibrin-enriched cardiac matrix hydrogel to enhance its angiogenic capacities. However, the bulk hydrogel structure may limit their full potential in cell delivery. Recently, granular hydrogels have emerged as a promising class of biomaterials, offering unique features such as a highly interconnected porous structure that facilitates nutrient diffusion and enhances cell viability. Several techniques have been developed for fabricating various types of granular hydrogels, among which extrusion fragmentation is particularly appealing due to its adaptability to many types of hydrogels, low cost, and high scalability. In this study, we first confirmed the effects of the bulk cardiac matrix hydrogel on the viability of encapsulated human umbilical vein endothelial cells and human mesenchymal stem cells. We then tested the feasibility of producing granular hydrogels from both cardiac matrix and fibrin-enriched cardiac matrix through cellular cross-linking of microgels fabricated by extrusion fragmentation. Afterward, we examined the roles of the produced granular hydrogels in the embedded cells and cell spheroids. Our in vitro data demonstrate that cardiac matrix-derived granular hydrogels support optimal viability of encapsulated cells and promote sprouting of human mesenchymal stem cell spheroids. Additionally, granular hydrogel derived from fibrin-enriched cardiac matrix accelerates angiogenic sprouting of embedded human mesenchymal stem cell spheroids. The results obtained from this study lay an important foundation for the future exploration of using cardiac matrix-derived granular hydrogels for cardiac cell therapy.

Biofabrication of prevascularized spheroids for bone tissue engineering by fusion of microvascular fragments with osteoblasts

Introduction

Spheroids are promising building blocks for scaffold-free bone tissue engineering. Their rapid vascularization is of major importance to guarantee their survival after transplantation. To achieve this, we herein introduce the biofabrication of prevascularized spheroids by fusion of adipose tissue-derived microvascular fragments (MVF) with osteoblasts (OB).

Methods

For this purpose, 200 MVF from donor mice and 5,000, 10,000 or 20,000 murine OB (MC3T3-E1) were co-cultured in a liquid overlay system for 3 days to generate OB + MVF spheroids. OB mono-culture spheroids served as controls.

Results and discussion

During the generation process, the diameters of all spheroids progressively decreased, resulting in compact, viable spheroids of homogeneous sizes. MVF promoted the maturation of spheroids containing 5,000 OB, as shown by an accelerated decline of cell proliferation due to contact inhibition. Moreover, MVF most effectively reassembled into new microvascular networks within these small spheroids when compared to the other spheroid types, indicating the most beneficial MVF to OB ratio. Accordingly, these spheroids also showed a high angiogenic sprouting activity in vitro. In contrast to OB spheroids, they further rapidly vascularized in vivo after transplantation into dorsal skinfold chambers. This was caused by the interconnection of incorporated MVF with surrounding blood vessels. These findings indicate that OB + MVF spheroids may be suitable for bone tissue engineering, which should be next tested in appropriate in vivo bone defect models.

Multimaterial 3D and 4D Bioprinting of Heterogenous Constructs for Tissue Engineering

Additive manufacturing (AM), which is based on the principle of layer-by-layer shaping and stacking of discrete materials, has shown significant benefits in the fabrication of complicated implants for tissue engineering (TE). However, many native tissues exhibit anisotropic heterogenous constructs with diverse components and functions. Consequently, the replication of complicated biomimetic constructs using conventional AM processes based on a single material is challenging. Multimaterial 3D and 4D bioprinting (with time as the fourth dimension) has emerged as a promising solution for constructing multifunctional implants with heterogenous constructs that can mimic the host microenvironment better than single-material alternatives. Notably, 4D-printed multimaterial implants with biomimetic heterogenous architectures can provide a time-dependent programmable dynamic microenvironment that can promote cell activity and tissue regeneration in response to external stimuli. This paper first presents the typical design strategies of biomimetic heterogenous constructs in TE applications. Subsequently, the latest processes in the multimaterial 3D and 4D bioprinting of heterogenous tissue constructs are discussed, along with their advantages and challenges. In particular, the potential of multimaterial 4D bioprinting of smart multifunctional tissue constructs is highlighted. Furthermore, this review provides insights into how multimaterial 3D and 4D bioprinting can facilitate the realization of next-generation TE applications.

Fabricating vascularized, anatomically accurate bone grafts using 3D bioprinted sectional bone modules, in-situ angiogenesis, BMP-2 controlled release, and bioassembly

Bone grafting is the most common treatment for repairing bone defects. However, current bone grafting methods have several drawbacks. Bone tissue engineering emerges as a promising solution to these problems. An ideal engineered bone graft should exhibit high mechanical strength, osteogenic properties, and pre-vascularization. Both top-down (using bulk scaffold) and bottom-up (using granular modules) approaches face challenges in fulfilling these requirements. In this paper, we propose a novel sectional modular bone approach to construct osteogenic, pre-vascularized bone grafts in anatomical shapes. We 3D-printed a series of rigid, thin, sectional, porous scaffolds from a biodegradable polymer, tailored to the dimensions of a femur bone shaft. These thin sectional modules promote efficient nutrition and waste removal due to a shorter diffusion distance. The modules were pre-vascularized viain-situangiogenesis, achieved through endothelial cell sprouting from the scaffold struts. Angiogenesis was further enhanced through co-culture with bioprinted fibroblast microtissues, which secreted pre-angiogenic growth factors. Sectional modules were assembled around a porous rod incorporated with Bone Morphogenetic Protein-2 (BMP-2), which released over 3 weeks, demonstrating sustained osteogenic activity. The assembled scaffold, in the anatomical shape of a human femur shaft, was pre-vascularized, osteogenic, and possessed high mechanical strength, supporting 12 times the average body weight. The feasibility of implanting the assembled bone graft was demonstrated using a 3D-printed femur bone defect model. Our method provides a novel modular engineering approach for regenerating tissues that require high mechanical strength and vascularization.

Advancing bone regeneration: Unveiling the potential of 3D cell models in the evaluation of bone regenerative materials

Bone, a rigid yet regenerative tissue, has garnered extensive attention for its impressive healing abilities. Despite advancements in understanding bone repair and creating treatments for bone injuries, handling nonunions and large defects remains a major challenge in orthopedics. The rise of bone regenerative materials is transforming the approach to bone repair, offering innovative solutions for nonunions and significant defects, and thus reshaping orthopedic care. Evaluating these materials effectively is key to advancing bone tissue regeneration, especially in difficult healing scenarios, making it a critical research area. Traditional evaluation methods, including two-dimensional cell models and animal models, have limitations in predicting accurately. This has led to exploring alternative methods, like 3D cell models, which provide fresh perspectives for assessing bone materials' regenerative potential. This paper discusses various techniques for constructing 3D cell models, their pros and cons, and crucial factors to consider when using these models to evaluate bone regenerative materials. We also highlight the significance of 3D cell models in the in vitro assessments of these materials, discuss their current drawbacks and limitations, and suggest future research directions. STATEMENT OF SIGNIFICANCE: This work addresses the challenge of evaluating bone regenerative materials (BRMs) crucial for bone tissue engineering. It explores the emerging role of 3D cell models as superior alternatives to traditional methods for assessing these materials. By dissecting the construction, key factors of evaluating, advantages, limitations, and practical considerations of 3D cell models, the paper elucidates their significance in overcoming current evaluation method shortcomings. It highlights how these models offer a more physiologically relevant and ethically preferable platform for the precise assessment of BRMs. This contribution is particularly significant for "Acta Biomaterialia" readership, as it not only synthesizes current knowledge but also propels the discourse forward in the search for advanced solutions in bone tissue engineering and regeneration.

Hydroxyapatite Nanoparticles Promote the Development of Bone Microtissues for Accelerated Bone Regeneration by Activating the FAK/Akt Pathway

Scaffold-free bone microtissues differentiated from mesenchymal stem cell (MSC) spheroids offer great potential for bottom-up bone tissue engineering as a direct supply of cells and osteogenic signals. Many biomaterials or biomolecules have been incorporated into bone microtissues to enhance their osteogenic abilities, but these materials are far from clinical approval. Here, we aimed to incorporate hydroxyapatite (HAP) nanoparticles, an essential component of bone matrix, into MSC spheroids to instruct their osteogenic differentiation into bone microtissues and further self-organization into bone organoids with a trabecular structure. Furthermore, the biological interaction between HAP nanoparticles and MSCs and the potential molecular mechanisms in the bone development of MSC spheroids were investigated by both in vitro and in vivo studies. As a result, improved cell viability and osteogenic abilities were observed for the MSC spheroids incorporated with HAP nanoparticles at a concentration of 30 μg/mL. HAP nanoparticles could promote the sequential expression of osteogenic markers (Runx2, Osterix, Sclerostin), promote the expression of bone matrix proteins (OPN, OCN, and Collagen I), promote the mineralization of the bone matrix, and thus promote the bone development of MSC spheroids. The differentiated bone microtissues could further self-organize into linear, lamellar, and spatial bone organoids with trabecular structures. More importantly, adding FAK or Akt inhibitors could decrease the level of HAP-induced osteogenic differentiation of bone microtissues. Finally, excellent new bone regeneration was achieved after injecting bone microtissues into cranial bone defect models, which could also be eliminated by the Akt inhibitor. In conclusion, HAP nanoparticles could promote the development of bone microtissues by promoting the osteogenic differentiation of MSCs and the formation and mineralization of the bone matrix via the FAK/Akt pathway. The bone microtissues could act as individual ossification centers and self-organize into macroscale bone organoids, and in this meaning, the bone microtissues could be called microscale bone organoids. Furthermore, the bone microtissues revealed excellent clinical perspectives for injectable cellular therapies for bone defects.

Mini-bones: miniaturized bone in vitro models

In bone tissue engineering (TE) and regeneration, miniaturized, (sub)millimeter-sized bone models have become a popular trend since they bring about physiological biomimicry, precise orchestration of concurrent stimuli, and compatibility with high-throughput setups and high-content imaging. They also allow efficient use of cells, reagents, materials, and energy. In this review, we describe the state of the art of miniaturized in vitro bone models, or 'mini-bones', describing these models based on their characteristics of (multi)cellularity and engineered extracellular matrix (ECM), and elaborating on miniaturization approaches and fabrication techniques. We analyze the performance of 'mini-bone' models according to their applications for studying basic bone biology or as regeneration models, disease models, and screening platforms, and provide an outlook on future trends, challenges, and opportunities.

Composite Spheroid-Laden Bilayer Hydrogel for Engineering Three-Dimensional Osteochondral Tissue

A combination of hydrogels and stem cell spheroids has been used to engineer three-dimensional (3D) osteochondral tissue, but precise zonal control directing cell fate within the hydrogel remains a challenge. In this study, we developed a composite spheroid-laden bilayer hydrogel to imitate osteochondral tissue by spatially controlled differentiation of human adipose-derived stem cells. Meticulous optimization of the spheroid-size and mechanical strength of gelatin methacryloyl (GelMA) hydrogel enables the cells to homogeneously sprout within the hydrogel. Moreover, fibers immobilizing transforming growth factor beta-1 (TGF-β1) or bone morphogenetic protein-2 (BMP-2) were incorporated within the spheroids, which induced chondrogenic or osteogenic differentiation of cells in general media, respectively. The spheroids-filled GelMA solution was crosslinked to create the bilayer hydrogel, which demonstrated a strong interfacial adhesion between the two layers. The cell sprouting enhanced the adhesion of each hydrogel, demonstrated by increase in tensile strength from 4.8 ± 0.4 to 6.9 ± 1.2 MPa after 14 days of culture. Importantly, the spatially confined delivery of BMP-2 within the spheroids increased mineral deposition and more than threefold enhanced osteogenic genes of cells in the bone layer while the cells induced by TGF-β1 signals were apparently differentiated into chondrocytes within the cartilage layer. The results suggest that our composite spheroid-laden hydrogel could be used for the biofabrication of osteochondral tissue, which can be applied to engineer other complex tissues by delivery of appropriate biomolecules.

In vitro induction of hair follicle signatures using human dermal papilla cells encapsulated in fibrin microgels

Cellular spheroids have been described as an appropriate culture system to restore human follicle dermal papilla cells (hFDPc) intrinsic properties; however, they show a low and variable efficiency to promote complete hair follicle formation in in vivo experiments. In this work, a conscientious analysis revealed a 25% cell viability in the surface of the dermal papilla spheroid (DPS) for all culture conditions, questioning whether it is an appropriate culture system for hFDPc. To overcome this problem, we propose the use of human blood plasma for the generation of fibrin microgels (FM) with encapsulated hFDPc to restore its inductive signature, either in the presence or in the absence of blood platelets. FM showed a morphology and extracellular matrix composition similar to the native dermal papilla, including Versican and Collagen IV and increasing cell viability up to 85%. While both systems induce epidermal invaginations expressing hair-specific keratins K14, K15, K71, and K75 in in vitro skin cultures, the number of generated structures increases from 17% to 49% when DPS and FM were used, respectively. These data show the potential of our experimental setting for in vitro hair follicle neogenesis with wild adult hFDPc using FM, being a crucial step in the pursuit of human hair follicle regeneration therapies.

An Update on Adipose-Derived Stem Cells for Regenerative Medicine: Where Challenge Meets Opportunity

Over the last decade, adipose-derived stem cells (ADSCs) have attracted increasing attention in the field of regenerative medicine. ADSCs appear to be the most advantageous cell type for regenerative therapies owing to their easy accessibility, multipotency, and active paracrine activity. This review highlights current challenges in translating ADSC-based therapies into clinical settings and discusses novel strategies to overcome the limitations of ADSCs. To further establish ADSC-based therapies as an emerging platform for regenerative medicine, this review also provides an update on the advancements in this field, including fat grafting, wound healing, bone regeneration, skeletal muscle repair, tendon reconstruction, cartilage regeneration, cardiac repair, and nerve regeneration. ADSC-based therapies are expected to be more tissue-specific and increasingly important in regenerative medicine.

Partner, Neighbor, Housekeeper and Dimension: 3D versus 2D Glomerular Co-Cultures Reveal Drawbacks of Currently Used Cell Culture Models

Signaling-pathway analyses and the investigation of gene responses to different stimuli are usually performed in 2D monocultures. However, within the glomerulus, cells grow in 3D and are involved in direct and paracrine interactions with different glomerular cell types. Thus, the results from 2D monoculture experiments must be taken with caution. We cultured glomerular endothelial cells, podocytes and mesangial cells in 2D/3D monocultures and 2D/3D co-cultures and analyzed cell survival, self-assembly, gene expression, cell-cell interaction, and gene pathways using live/dead assay, time-lapse analysis, bulk-RNA sequencing, qPCR, and immunofluorescence staining. Without any need for scaffolds, 3D glomerular co-cultures self-organized into spheroids. Podocyte- and glomerular endothelial cell-specific markers and the extracellular matrix were increased in 3D co-cultures compared to 2D co-cultures. Housekeeping genes must be chosen wisely, as many genes used for the normalization of gene expression were themselves affected in 3D culture conditions. The transport of podocyte-derived VEGFA to glomerular endothelial cells confirmed intercellular crosstalk in the 3D co-culture models. The enhanced expression of genes important for glomerular function in 3D, compared to 2D, questions the reliability of currently used 2D monocultures. Hence, glomerular 3D co-cultures might be more suitable in the study of intercellular communication, disease modelling and drug screening ex vivo.

Synergetic effect of 3D porous microsphere structure and activation of adenosine A2B receptor signal on promoting osteogenic differentiation of BMSCs

Biodegradable microspheres offer great potential as functional building blocks for bottom-up bone tissue engineering. However, it remains challenging to understand and regulate cell behaviors in fabrication of injectable bone microtissues using microspheres. The study aims to develop an adenosine functionalized poly (lactide-co-glycolide) (PLGA) microsphere to enhance cell loading efficiency and inductive osteogenesis potential, and subsequently to investigate adenosine signaling-mediated osteogenic differentiation in cells grown on three-dimensional (3D) microspheres and flat control. Adenosine was loaded on PLGA porous microspheres via polydopamine coating, and the cell adhesion and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) were improved on these microspheres. It was found that adenosine A2B receptor (A2BR) was further activated by adenosine treatment, which consequently enhanced osteogenic differentiation of BMSCs. This effect was more obvious on 3D microspheres compared to 2D flats. However, the promotion of osteogenesis on the 3D microspheres was not eliminated by blocking the A2BR with antagonist. Finally, adenosine functionalized microspheres could fabricate injectable microtissues in vitro, and improve cell delivery and osteogenic differentiation after injection in vivo. Therefore, it is considered that adenosine loaded PLGA porous microspheres will be of good value in minimally invasive injection surgery and bone tissue repair.

dECM based dusal-responsive vascular graft with enzyme-controlled adenine release for long-term patency

Rapid occlusion is the culprit leading to implantation failure of biological blood vessels. Although adenosine is a clinical-proven drug to overcome the problem, its short half-life and turbulent burst-release limit its direct application. Thus, a pH/temperature dual-responsive blood vessel possessed controllable long-term adenosine secretion was constructed based on acellular matrix via compact crosslinking by oxidized chondroitin sulfate (OCSA) and functionalized with apyrase and acid phosphatase. These enzymes, as adenosine micro-generators, controlled the adenosine release amount by "real-time-responding" to acidity and temperature of vascular inflammation sites. Additionally, the macrophage phenotype was switched from M1 to M2, and related factors expression proved that adenosine release was effectively regulated with the severity of inflammation. What's more, the ultra-structure for degradation resisting and endothelialization accelerating was also preserved by their "double-crosslinking". Therefore, this work suggested a new feasible strategy providing a bright future of long-term patency for transplanted blood vessels.

Thyroid-Friendly Soft Materials as 3D Cell Culture Tool for Stimulating Thyroid Cell Function

The disruption of thyroid hormones because of chemical exposure is a significant societal problem. Chemical evaluations of environmental and human health risks are conventionally based on animal experiments. However, owing to recent breakthroughs in biotechnology, the potential toxicity of chemicals can now be evaluated using 3D cell cultures. In this study, the interactive effects of thyroid-friendly soft (TS) microspheres on thyroid cell aggregates are elucidated and their potential as a reliable toxicity assessment tool is evaluated. Using state-of-the-art characterization methods coupled with cell-based analysis and quadrupole time-of-flight mass spectrometry, it is shown that TS-microsphere-integrated thyroid cell aggregates exhibit improved thyroid function. Specifically, the responses of zebrafish embryos, which are used for thyroid toxicity analysis, and the TS-microsphere-integrated cell aggregates to methimazole (MMI), a known thyroid inhibitor, are compared. The results show that the thyroid hormone disruption response of the TS-microsphere-integrated thyroid cell aggregates to MMI is more sensitive compared with those of the zebrafish embryos and conventionally formed cell aggregates. This proof-of-concept approach can be used to control cellular function in the desired direction and hence evaluate thyroid function. Thus, the proposed TS-microsphere-integrated cell aggregates may yield new fundamental insights for advancing in vitro cell-based research.

Nanofabrication Technologies to Control Cell and Tissue Function in Three-Dimension

In the 2000s, advances in cellular micropatterning using microfabrication contributed to the development of cell-based biosensors for the functional evaluation of newly synthesized drugs, resulting in a revolutionary evolution in drug screening. To this end, it is essential to utilize cell patterning to control the morphology of adherent cells and to understand contact and paracrine-mediated interactions between heterogeneous cells. This suggests that the regulation of the cellular environment by means of microfabricated synthetic surfaces is not only a valuable endeavor for basic research in biology and histology, but is also highly useful to engineer artificial cell scaffolds for tissue regeneration. This review particularly focuses on surface engineering techniques for the cellular micropatterning of three-dimensional (3D) spheroids. To establish cell microarrays, composed of a cell adhesive region surrounded by a cell non-adherent surface, it is quite important to control a protein-repellent surface in the micro-scale. Thus, this review is focused on the surface chemistries of the biologically inspired micropatterning of two-dimensional non-fouling characters. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single-cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., fibers and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. These important approaches to cell engineering result in their applications to tissue regeneration, where the cell-biomaterial composite is injected into diseased area. This approach allows the operating surgeon to implant the cell and polymer combinations with minimum invasiveness. The polymers utilized in hydrogels are structurally similar to components of the extracellular matrix in vivo, and are considered biocompatible. This review will provide an overview of the critical design to make hydrogels when used as cell scaffolds for tissue engineering. In addition, the new strategy of injectable hydrogel will be discussed as future directions.

[Low level laser therapy: molecular mechanisms of anti-inflammatory and regenerative effects]

Laser therapy as a physiotherapeutic method has been successfully used for a long time in the treatment of various pathologies, but the action mechanisms of low level laser therapy (LLLT) remain understudied.

OBJECTIVE

To perform the analysis of published results of LLLT investigations, to describe the physical principles of photobiomodulation, its action mechanisms on various cells and tissues, therapeutic intervention and efficiency of the technique.

MATERIAL AND METHODS

The search of articles was done for the period from 2014 to 2022. The preference was given to the articles for the last 5 years in the PubMed database depending on keywords: low level laser therapy, photobiomodulation, exosomes, monocytes, macrophages.

RESULTS AND DISCUSSION

This article represents the current conceptions about the action mechanisms and reproduced effects of low level laser therapy, the photobiomodulation influence on the inflammation and reparative processes in human body by intervention on cells and their signal pathways. The discussion of research results and probable causes of conflicting data are performed, as well as the efficacy assessment of laser irradiation in different conditions and diseases is made.

CONCLUSION

Laser therapy has certain variety of advantages, among which: non-invasiveness and availability, long-term service of equipment, stable intensity of light radiation and the ability to use in various wavelength ranges. The technique efficacy was proven for a large number of diseases. However, for the successful application of photobiomodulation in clinical practice in current evidence-based medicine, additional investigations are necessary to determine the best dosimetric radiation parameters, as well as further study of action mechanisms on various human cells and tissues.

Therapeutic strategies of three-dimensional stem cell spheroids and organoids for tissue repair and regeneration

Three-dimensional (3D) stem cell culture systems have attracted considerable attention as a way to better mimic the complex interactions between individual cells and the extracellular matrix (ECM) that occur in vivo. Moreover, 3D cell culture systems have unique properties that help guide specific functions, growth, and processes of stem cells (e.g., embryogenesis, morphogenesis, and organogenesis). Thus, 3D stem cell culture systems that mimic in vivo environments enable basic research about various tissues and organs. In this review, we focus on the advanced therapeutic applications of stem cell-based 3D culture systems generated using different engineering techniques. Specifically, we summarize the historical advancements of 3D cell culture systems and discuss the therapeutic applications of stem cell-based spheroids and organoids, including engineering techniques for tissue repair and regeneration.

DLP-based bioprinting of void-forming hydrogels for enhanced stem-cell-mediated bone regeneration

The integration of 3D bioprinting and stem cells is of great promise in facilitating the reconstruction of cranial defects. However, the effectiveness of the scaffolds has been hampered by the limited cell behavior and functions. Herein, a therapeutic cell-laden hydrogel for bone regeneration is therefore developed through the design of a void-forming hydrogel. This hydrogel is prepared by digital light processing (DLP)-based bioprinting of the bone marrow stem cells (BMSCs) mixed with gelatin methacrylate (GelMA)/dextran emulsion. The 3D-bioprinted hydrogel can not only promote the proliferation, migration, and spreading of the encapsulated BMSCs, but also stimulate the YAP signal pathway, thus leading to the enhanced osteogenic differentiation of BMSCs. In addition, the in vivo therapeutic assessments reveal that the void-forming hydrogel shows great potential for BMSCs delivery and can significantly promote bone regeneration. These findings suggest that the unique 3D-bioprinted void-forming hydrogels are promising candidates for applications in bone regeneration.

A critical review on polydopamine surface-modified scaffolds in musculoskeletal regeneration

Increasing concern about age-related diseases, particularly musculoskeletal injuries and orthopedic conditions, highlights the need for strategies such as tissue engineering to address them. Surface modification has been developed to create pro-healing interfaces, personalize scaffolds and provide novel medicines. Polydopamine, a mussel-inspired adhesive polymer with highly reactive functional groups that adhere to nearly all substrates, has gained attention in surface modification strategies for biomaterials. Polydopamine was primarily developed to modify surfaces, but its effectiveness has opened up promising approaches for further applications in bioengineering as carriers and nanoparticles. This review focuses on the recent discoveries of the role of polydopamine as a surface coating material, with focus on the properties that make it suitable for tackling musculoskeletal disorders. We report the evolution of using it in research, and discuss papers involving the progress of this field. The current research on the role of polydopamine in bone, cartilage, muscle, nerve, and tendon regeneration is discussed, thus giving comprehensive overview about the function of polydopamine both in-vitro and in-vivo. Finally, the report concludes presenting the critical challenges that must be addressed for the clinical translation of this biomaterial while exploring future perspectives and research opportunities in this area.

Functionalization of Electrospun Nanofiber for Bone Tissue Engineering

Bone-tissue engineering is an alternative treatment for bone defects with great potential in which scaffold is a critical factor to determine the effect of bone regeneration. Electrospun nanofibers are widely used as scaffolds in the biomedical field for their similarity with the structure of the extracellular matrix (ECM). Their unique characteristics are: larger surface areas, porosity and processability; these make them ideal candidates for bone-tissue engineering. This review briefly introduces bone-tissue engineering and summarizes the materials and methods for electrospining. More importantly, how to functionalize electrospun nanofibers to make them more conducive for bone regeneration is highlighted. Finally, the existing deficiencies of functionalized electrospun nanofibers for promoting osteogenesis are proposed. Such a summary can lay the foundation for the clinical practice of functionalized electrospun nanofibers.

Assessment of Cell-Material Interactions in Three Dimensions through Dispersed Coaggregation of Microsized Biomaterials into Tissue Spheroids

In biomaterials R&D, conventional monolayer cell culture on flat/planar material samples, such as films, is still commonly employed at early stages of the assessment of interactions of cells with candidate materials considered for a biomedical application. In this feasibility study, an approach for the assessment of 3D cell-material interactions through dispersed coaggregation of microparticles from biomaterials into tissue spheroids is presented. Biomaterial microparticles can be created comparatively quickly and easily, allow the miniaturization of the assessment platform, and enable an unhindered remodeling of the dynamic cell-biomaterial system at any time. The aggregation of the microsized biomaterials and the cells is supported by low-attachment round-bottom microwells from thin polymer films arranged in densely packed arrays. The study is conducted by the example of MG63 osteoblast-like and human mesenchymal stem/stromal cells, and a small library of model microbiomaterials related to bone repair and regeneration. For the proof of concept, example interactions including cell adhesion to the material, the hybrid spheroids' morphology, size, and shape, material-associated cell death, cell metabolic activity, cell proliferation, and (osteogenic) differentiation are investigated. The cells in the spheroids are shown to respond to differences in the microbiomaterials' properties, their amounts, and the duration of interaction with them.

Free radical-scavenging composite gelatin methacryloyl hydrogels for cell encapsulation

Gelatin methacryloyl (GelMA) hydrogels have been widely used for cell encapsulation in tissue engineering due to their cell adhesiveness and biocompatibility. However, free radicals generated during gelation decrease the viability of the encapsulated cells by increasing intracellular oxidative stress, so appropriate strategies for scavenging free radicals need to be developed. To meet that need, we developed composite GelMA hydrogels incorporating nanofiber particles (EF) coated with epigallocatechin-gallate (EGCG). The GelMA composite hydrogels were successfully fabricated and had a storage modulus of about 5 kPa, which is similar to that of pristine GelMA hydrogel, and the drastic free radical scavenging activity of EGCG was highly preserved after gelation. In addition, human adipose-derived stem cells encapsulated within our composite hydrogels had better viability (about 1.5 times) and decreased intracellular oxidative stress (about 0.3 times) compared with cells within the pristine GelMA hydrogel. We obtained similar results with human dermal fibroblasts and human umbilical vein endothelial cells, indicating that our composite hydrogels are suitable for various cell types. Furthermore, we found that the ability of the encapsulated cells to spread and migrate increased by 5 times within the composite hydrogels. Collectively, our results demonstrate that incorporating EF into GelMA hydrogels is a promising way to enhance cell viability by reducing free-radical-derived cellular damage when fabricating 3D tissue ex vivo. STATEMENT OF SIGNIFICANCE: Gelatin methacryloyl (GelMA) hydrogels have been widely applied to various tissue engineering applications because of their biocompatibility and cell interactivity. However, free radicals generated during the GelMA hydrogel fabrication decrease the viability of encapsulated cells by elevating intracellular oxidative stress. Here, we demonstrate radical scavenging GelMA hydrogels incorporating epigallocatechin-gallate (EGCG)-coated nanofiber particles (EF). The composite GelMA hydrogels are successfully fabricated, maintaining their mechanical properties, and the viability of encapsulated human adipose-derived stem cells is greatly improved after the gelation, indicating that our composite GelMA hydrogel alleviates damages from free radicals. Collectively, the incorporation of EF within GelMA hydrogels may be a promising way to enhance the viability of encapsulated cells, which could be applied to 3D tissue fabrication.

Metal Ion Augmented Mussel Inspired Polydopamine Immobilized 3D Printed Osteoconductive Scaffolds for Accelerated Bone Tissue Regeneration

Critical bone defects with a sluggish rate of auto-osteoconduction and imperfect reconstruction are motivators for the development of an alternate innovative approach for the regeneration of bone. Tissue engineering for bone regeneration signifies an advanced way to overcome this problem by creating an additional bone tissue substitute. Among different fabrication techniques, the 3D printing technique is obviously the most efficient and advanced way to fabricate an osteoconductive scaffold with a controlled porous structure. In the current article, the polycarbonate and polyester diol based polyurethane-urea (P12) was synthesized and 3D porous nanohybrid scaffolds (P12/TP-nHA) were fabricated using the 3D printing technique by incorporating the osteoconductive nanomaterial titanium phosphate adorned nanohydroxyapatite (TP-nHA). To improve the bioactivity, the surface of the fabricated scaffolds was modified with the immobilized biomolecule polydopamine (PDA) at room temperature. XPS study as well as the measurement of surface wettability confirmed the higher amount of PDA immobilization on TP-nHA incorporated nanohybrid scaffolds through the dative bone formation between the vacant d orbital of the incorporated titanium ion and the lone pair electron of the catechol group of dopamine. The incorporated titanium phosphate (TP) increased the tensile strength (53.1%) and elongation at break (96.8%) of the nanohybrid composite as compared to pristine P12. Moreover, the TP incorporated nanohybrid scaffold with calcium and phosphate moieties and a higher amount of immobilized active biomolecule improved the in vitro bioactivity, including the cell viability, cell proliferation, and osteogenic gene expression using hMSCs, of the fabricated nanohybrid scaffolds. A rat tibia defect model depicted that the TP incorporated nanohybrid scaffold with immobilized PDA enhanced the in vivo bone regeneration ability compared to the control sample without revealing any organ toxicity signifying the superior osteogenic bioactivity. Thus, a TP augmented polydopamine immobilized polyurethane-urea based nanohybrid 3D printed scaffold with improved physicochemical properties and osteogenic bioactivity could be utilized as an excellent advanced material for bone regeneration substitute.

Interaction of alginate with nano-hydroxyapatite-collagen using strontium provides suitable osteogenic platform

Background

Hydrogels based on organic/inorganic composites have been at the center of attention for the fabrication of engineered bone constructs. The establishment of a straightforward 3D microenvironment is critical to maintaining cell-to-cell interaction and cellular function, leading to appropriate regeneration. Ionic cross-linkers, Ca²⁺, Ba²⁺, and Sr²⁺, were used for the fabrication of Alginate-Nanohydroxyapatite-Collagen (Alg-nHA-Col) microspheres, and osteogenic properties of human osteoblasts were examined in in vitro and in vivo conditions after 21 days.

Results

Physicochemical properties of hydrogels illustrated that microspheres cross-linked with Sr²⁺ had reduced swelling, enhanced stability, and mechanical strength, as compared to the other groups. Human MG-63 osteoblasts inside Sr²⁺ cross-linked microspheres exhibited enhanced viability and osteogenic capacity indicated by mineralization and the increase of relevant proteins related to bone formation. PCR (Polymerase Chain Reaction) array analysis of the Wnt (Wingless-related integration site) signaling pathway revealed that Sr²⁺ cross-linked microspheres appropriately induced various signaling transduction pathways in human osteoblasts leading to osteogenic activity and dynamic growth. Transplantation of Sr²⁺ cross-linked microspheres with rat osteoblasts into cranium with critical size defect in the rat model accelerated bone formation analyzed with micro-CT and histological examination.

Conclusion

Sr²⁺ cross-linked Alg-nHA-Col hydrogel can promote functionality and dynamic growth of osteoblasts.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01511-9.

Scaffold-Free Spheroids with Two-Dimensional Heteronano-Layers (2DHNL) Enabling Stem Cell and Osteogenic Factor Codelivery for Bone Repair

Scaffold-free spheroids offer great potential as a direct supply of cells for bottom-up bone tissue engineering. However, the building of functional spheroids with both cells and bioactive signals remains challenging. Here, we engineered functional spheroids with mesenchymal stem cells (MSCs) and two-dimensional heteronano-layers (2DHNL) that consisted of black phosphorus (BP) and graphene oxide (GO) to create a 3D cell-instructive microenvironment for large defect bone repair. The effects of the engineered 2D materials on the proliferation, osteogenic differentiation of stem cells was evaluated in an in vitro 3D spheroidal microenvironment. Excellent in vivo support of osteogenesis of MSCs, neovascularization, and bone regeneration was achieved after transplanting these engineered spheroids into critical-sized rat calvarial defects. Further loading of osteogenic factor dexamethasone (DEX) on the 2DHNL showed outstanding in vivo osteogenic induction and bone regrowth without prior in vitro culture in osteogenic medium. The shortened overall culture time would be advantageous for clinical translation. These functional spheroids impregnated with engineered 2DHNL enabling stem cell and osteogenic factor codelivery could be promising functional building blocks to provide cells and differential clues in an all-in-one system to create large tissues for time-effective in vivo bone repair.

Collagen and nano-hydroxyapatite interactions in alginate-based microcapsule provide an appropriate osteogenic microenvironment for modular bone tissue formation

The addition of nano-hydroxyapatite (nHA) and collagen (Col) to the alginate (Alg) microcapsule hydrogel reduced swelling and degradation ratios while the compressive strength increased compared to Alg, Alg-Col, and Alg-nHA groups. MTT assay and Calcein-AM staining revealed an enhanced MG-63 osteoblasts viability in the Alg-nHA-Col hydrogel compared to the other groups. SEM showed the attachment of MG-63 osteoblasts inside Alg-Col hydrogels. Non-significant differences were found in antioxidant capacity of cells inside the Alg-nHA-Col hydrogel compared to the Alg group. Hematoxylin-Eosin staining showed the distribution of MG-63 osteoblasts inside microspheres. Calcium deposits, alkaline phosphatase (ALP) activity with the increase of intracellular calcium were found in Alg-nHA-Col group. Western blotting showed that levels of osteocalcin, ColA2, Sox-9, and ColA1 also significantly increased compared to the Alg, Alg-Col, Alg-nHA groups. The present study demonstrated that the addition of mineral nHA and protein (Col) into the Alg improves osteogenic potential and provides a 3D platform for modular bone tissue engineering.

The Use of Fibers in Bone Tissue Engineering

Bone tissue engineering aims to restore and maintain the function of bone by means of biomaterial-based scaffolds. This review specifically focuses on the use of fibers in biomaterials used for bone tissue engineering as suitable environment for bone tissue repair and regeneration. We present a bioinspired rationale behind the use of fibers in bone tissue engineering and provide an overview of the most common fiber fabrication methods, including solution, melt, and microfluidic spinning. Subsequently, we provide a brief overview of the composition of fibers that are used in bone tissue engineering, including fibers composed of (i) natural polymers (e.g., cellulose, collagen, gelatin, alginate, chitosan, and silk, (ii) synthetic polymers (e.g., polylactic acid [PLA], polycaprolactone, polyglycolic acid [PGA], polyethylene glycol, and polymer blends of PLA and PGA), (iii) ceramic fibers (e.g., aluminium oxide, titanium oxide, and zinc oxide), (iv) metallic fibers (e.g., titanium and its alloys, copper and magnesium), and (v) composite fibers. In addition, we review the most relevant fiber modification strategies that are used to enhance the (bio)functionality of these fibers. Finally, we provide an overview of the applicability of fibers in biomaterials for bone tissue engineering, with a specific focus on mechanical, pharmaceutical, and biological properties of fiber-functionalized biomaterials for bone tissue engineering. Impact statement Natural bone is a complex composite material composed of an extracellular matrix of mineralized fibers containing living cells and bioactive molecules. Consequently, the use of fibers in biomaterial-based scaffolds offers a wide variety of opportunities to replicate the functional performance of bone. This review provides an overview of the use of fibers in biomaterials for bone tissue engineering, thereby contributing to the design of novel fiber-functionalized bone-substituting biomaterials of improved functionality regarding their mechanical, pharmaceutical, and biological properties.

Directed Regeneration of Osteochondral Tissue by Hierarchical Assembly of Spatially Organized Composite Spheroids

The use of engineered scaffolds or stem cells is investigated widely in the repair of injured musculoskeletal tissue. However, the combined regeneration of hierarchical osteochondral tissue remains a challenge due to delamination between cartilage and subchondral bone or difficulty in spatial control over differentiation of transplanted stem cells. Here, two types of composite spheroids are prepared using adipose-derived stem cells (hADSCs) and nanofibers coated with either transforming growth factor-β3 or bone morphogenetic growth factor-2 for chondrogenesis or osteogenesis, respectively. Each type of spheroid is then cultured within a 3D-printed microchamber in a spatially arranged manner to recapitulate the bilayer structure of osteochondral tissue. The presence of inductive factors regionally modulates in vitro chondrogenic or osteogenic differentiation of hADSCs within the biphasic construct without dedifferentiation. Furthermore, hADSCs from each spheroid proliferate and sprout and successfully connect the two layers mimicking the osteochondral interface without apertures. In vivo transplantation of the biphasic construct onto a femoral trochlear groove defect in rabbit knee joint results in 21.2 ± 2.8% subchondral bone volume/total volume and a cartilage score of 25.0 ± 3.7. The present approach can be an effective therapeutic platform to engineer complex tissue.

Magnetism-controlled assembly of composite stem cell spheroids for the biofabrication of contraction-modulatory 3D tissue

Biofabrication of organ-like engineered 3D tissue through the assembly of magnetized 3D multi-cellular spheroids has been recently investigated in tissue engineering. However, the cytotoxicity of magnetic nanoparticles (MNPs) and contraction-induced structural deformation of the constructs have been major limitations. In this study, we developed a method to fabricate composite stem cell spheroids using MNP-coated fibers, alleviating MNP-mediated toxicity and controlling structural assembly under external magnetic stimuli. The MNP-coated synthetic fibers (MSFs) were prepared by coating various amounts of MNPs on the fibers via electrostatic interactions. The MSFs showed magnetic hysteresis and no cytotoxicity on 2D-cultured adipose-derived stem cells (ADSCs). The composite spheroids containing MSFs and ADSCs were rapidly formed in which the amount of impregnated MSFs modulated the spheroid size. The fusion ofin vitrocomposite spheroids was then monitored at the contacting interface; the fused spheroids with over 10μg of MSF showed minimal contraction after 7 d, retaining around 90% of total area ratio regardless of the number of cells, indicating that the presence of fibers within the composite spheroid supported its structural maintenance. The fusion of MSF spheroids was modulated by external magnetic stimulation, and the effect of magnetic force on the movement and fusion of the spheroids was investigated using COMSOL simulation. Finally, ring and lamellar structures were successfully assembled using remote-controlled MSF spheroids, showing limited deformation and high viability up to 50 d duringin vitroculture. In addition, the MSFs demonstrated no adverse effects on ADSC osteochondral differentiation. Altogether, we envision that our magnetic assembly system would be a promising method for the tissue engineering of structurally controlled organ-like constructs.

Nanomaterials for Targeted Delivery of Agrochemicals by an All-in-One Combination Strategy and Deep Learning

The development of modern agriculture has prompted the greater input of herbicides, insecticides, and fertilizers. However, precision release and targeted delivery of these agrochemicals still remain a challenge. Here, a pesticide-fertilizer all-in-one combination (PFAC) strategy and deep learning are employed to form a system for controlled and targeted delivery of agrochemicals. This system mainly consists of three components: (1) hollow mesoporous silica (HMS), to encapsulate herbicides and phase-change material; (2) polydopamine (PDA) coating, to provide a photothermal effect; and (3) a zeolitic imidazolate framework (ZIF8), to provide micronutrient Zn2+ and encapsulate insecticides. Results show that the PFAC at concentration of 5 mg mL-1 reaches the phase transition temperature of 1-tetradecanol (37.5 °C) after 5 min of near-infrared (NIR) irradiation (800 nm, 0.5 W cm-2). The data of corn and weed are collected and relayed to deep learning algorithms for model building to realize object detection and further targeted weeding. In-field treatment results indicated that the growth of chicory herb was significantly inhibited when treated with the PFAC compared with the blank group after 24 h under NIR irradiation for 2 h. This system combines agrochemical innovation and artificial intelligence technology, achieves synergistic effects of weeding and insecticide and nutrient supply, and will potentially achieve precision and sustainable agriculture.

Low level laser therapy promotes bone regeneration by coupling angiogenesis and osteogenesis

BACKGROUND

Bone tissue engineering is a new concept bringing hope for the repair of large bone defects, which remains a major clinical challenge. The formation of vascularized bone is key for bone tissue engineering. Growth of specialized blood vessels termed type H is associated with bone formation. In vivo and in vitro studies have shown that low level laser therapy (LLLT) promotes angiogenesis, fracture healing, and osteogenic differentiation of stem cells by increasing reactive oxygen species (ROS). However, whether LLLT can couple angiogenesis and osteogenesis, and the underlying mechanisms during bone formation, remains largely unknown.

METHODS

Mouse bone marrow mesenchymal stem cells (BMSCs) combined with biphasic calcium phosphate (BCP) grafts were implanted into C57BL/6 mice to evaluate the effects of LLLT on the specialized vessel subtypes and bone regeneration in vivo. Furthermore, human BMSCs and human umbilical vein endothelial cells (HUVECs) were co-cultured in vitro. The effects of LLLT on cell proliferation, angiogenesis, and osteogenesis were assessed.

RESULTS

LLLT promoted the formation of blood vessels, collagen fibers, and bone tissue and also increased CD31^hiEMCN^hi-expressing type H vessels in mBMSC/BCP grafts implanted in mice. LLLT significantly increased both osteogenesis and angiogenesis, as well as related gene expression (HIF-1α, VEGF, TGF-β) of grafts in vivo and of co-cultured BMSCs/HUVECs in vitro. An increase or decrease of ROS induced by H₂O₂ or Vitamin C, respectively, resulted in an increase or decrease of HIF-1α, and a subsequent increase and decrease of VEGF and TGF-β in the co-culture system. The ROS accumulation induced by LLLT in the co-culture system was significantly decreased when HIF-1α was inhibited with DMBPA and was followed by decreased expression of VEGF and TGF-β.

CONCLUSIONS

LLLT enhanced vascularized bone regeneration by coupling angiogenesis and osteogenesis. ROS/HIF-1α was necessary for these effects of LLLT. LLLT triggered a ROS-dependent increase of HIF-1α, VEGF, and TGF-β and resulted in subsequent formation of type H vessels and osteogenic differentiation of mesenchymal stem cells. As ROS also was a target of HIF-1α, there may be a positive feedback loop between ROS and HIF-1α, which further amplified HIF-1α induction via the LLLT-mediated ROS increase. This study provided new insight into the effects of LLLT on vascularization and bone regeneration in bone tissue engineering.

Biomaterials-assisted spheroid engineering for regenerative therapy

Cell-based therapy is a promising approach in the field of regenerative medicine. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., nano- or microparticles, fibers, and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. Therefore, cell spheroids in synergy with biomaterials have recently emerged for cell-based regenerative therapy. Biomaterials-assisted spheroid engineering has been extensively studied for regeneration of bone or/and cartilage defects, critical limb ischemia, and myocardial infarction. Furthermore, it has been expanded to pancreas islets and hair follicle transplantation. This paper comprehensively reviews biomaterials-assisted spheroid engineering for regenerative therapy.

Biomaterials-assisted spheroid engineering for regenerative therapy

Cell-based therapy is a promising approach in the field of regenerative medicine. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., nano- or microparticles, fibers, and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. Therefore, cell spheroids in synergy with biomaterials have recently emerged for cell-based regenerative therapy. Biomaterials-assisted spheroid engineering has been extensively studied for regeneration of bone or/and cartilage defects, critical limb ischemia, and myocardial infarction. Furthermore, it has been expanded to pancreas islets and hair follicle transplantation. This paper comprehensively reviews biomaterials-assisted spheroid engineering for regenerative therapy. [BMB Reports 2021; 54(7): 356-367].

Advanced Strategies of Biomimetic Tissue-Engineered Grafts for Bone Regeneration

The failure to repair critical-sized bone defects often leads to incomplete regeneration or fracture non-union. Tissue-engineered grafts have been recognized as an alternative strategy for bone regeneration due to their potential to repair defects. To design a successful tissue-engineered graft requires the understanding of physicochemical optimization to mimic the composition and structure of native bone, as well as the biological strategies of mimicking the key biological elements during bone regeneration process. This review provides an overview of engineered graft-based strategies focusing on physicochemical properties of materials and graft structure optimization from macroscale to nanoscale to further boost bone regeneration, and it summarizes biological strategies which mainly focus on growth factors following bone regeneration pattern and stem cell-based strategies for more efficient repair. Finally, it discusses the current limitations of existing strategies upon bone repair and highlights a promising strategy for rapid bone regeneration.

Minimalist Tissue Engineering Approaches Using Low Material-Based Bioengineered Systems

From an "over-engineering" era in which biomaterials played a central role, now it is observed to the emergence of "developmental" tissue engineering (TE) strategies which rely on an integrative cell-material perspective that paves the way for cell self-organization. The current challenge is to engineer the microenvironment without hampering the spontaneous collective arrangement ability of cells, while simultaneously providing biochemical, geometrical, and biophysical cues that positively influence tissue healing. These efforts have resulted in the development of low-material based TE strategies focused on minimizing the amount of biomaterial provided to the living key players of the regenerative process. Through a "minimalist-engineering" approach, the main idea is to fine-tune the spatial balance occupied by the inanimate region of the regenerative niche toward maximum actuation of the key living components during the healing process.

Silk-Based Materials for Hard Tissue Engineering

Hard tissues, e.g., bone, are mechanically stiff and, most typically, mineralized. To design scaffolds for hard tissue regeneration, mechanical, physico-chemical and biological cues must align with those found in the natural tissue. Combining these aspects poses challenges for material and construct design. Silk-based materials are promising for bone tissue regeneration as they fulfill several of such necessary requirements, and they are non-toxic and biodegradable. They can be processed into a variety of morphologies such as hydrogels, particles and fibers and can be mineralized. Therefore, silk-based materials are versatile candidates for biomedical applications in the field of hard tissue engineering. This review summarizes silk-based approaches for mineralized tissue replacements, and how to find the balance between sufficient material stiffness upon mineralization and cell survival upon attachment as well as nutrient supply.

Comparative Study on 3D Printed Ti6Al4V Scaffolds with Surface Modifications Using Hydrothermal Treatment and Microarc Oxidation to Enhance Osteogenic Activity

Titanium (Ti) and its alloys have been widely used in clinics as preferred materials for bone tissue repair and replacement. However, the lack of biological activity of Ti limits its clinical applications. Surface modification of Ti with bioactive elements has always been a research hotspot. In this study, to promote the osseointegration of Ti6Al4V (Ti64) implants, calcium (Ca), oxygen (O), and phosphorus (P) codoped multifunctional micro–nanohybrid coatings were prepared on a three-dimensional (3D) printed porous Ti64 surface by microarc oxidation (MAO) and a hydrothermal method (HT). The surface morphologies, chemical compositions, and surface/cell interactions of the obtained coatings were studied. In vitro experiments indicated that all hybrid coating-modified Ti64 implants could enhance protein adsorption and MC3T3 osteoblasts’ activity, adhesion, and differentiation ability. In vivo experiments showed that the hybrid coating promoted early osseointegration. By comparison, microarc oxidation-treated Ti64 (M-Ti) has the best biological activity and the strongest ability of osseointegration. It provides important theoretical significance and potential application prospects for improving the biological activity of Ti implants.

Mesenchymal stem cell spheroids incorporated with collagen and black phosphorus promote osteogenesis of biodegradable hydrogels

Mesenchymal stem cell (MSC)-spheroids have sparked significant interest in bone tissue engineering due to their resemblance to natural bone tissue, especially in terms of cell-cell and cell-extracellular matrix interactions. Many biomaterials or biomolecules have been incorporated into MSC-spheroids to enhance their osteogenic abilities. In this respect, we assessed the osteogenic responses of MSC spheroids leveraged through the unique combination of collagen and black phosphorus (BP). The MSC spheroids were successfully constructed with 6 μg/mL collagen and/or a concentration gradient (0 μg/mL, 4 μg/mL, 8 μg/mL, and 16 μg/mL) of BP and were evaluated for MSC viability and their osteogenic differentiation over a time period of 14 days. Improved MSC viability and osteogenic ability were observed for the spheroids with collagen and BP at the concentration of 4 μg/mL and 8 μg/mL. Next, blank spheroids (Control) or the optimized MSC spheroids with 6 μg/mL collagen and 4 μg/mL BP (Col+BP4) were further encapsulated into two types of hydrogel scaffolds: porous oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel and hydroxyapatite-collagen I scaffold (HE-COL). The osteogenic abilities of these four groups were evaluated after 14 and 21 days of osteogenic induction. The MSC spheroids incorporated with collagen and BP implanted into OPF porous hydrogel (Col+BP/OPF) elicited a higher expression of Runx2, osteopontin, and alkaline phosphatase than blank spheroids implanted into OPF porous hydrogel (Control/OPF). Enhanced osteogenesis was also observed in the Col+BP/HE-COL group as compared to Control/HE-COL. Taken together, the results from this study showed the perspectives of collagen and BP incorporated MSC spheroids for the development of injectable cellular therapies for bone regeneration.

Stem cell spheroid engineering with osteoinductive and ROS scavenging nanofibers for bone regeneration

Stem cell spheroids have been widely investigated to accelerate bone tissue regeneartion. However, the directed differentiation of stem cells into osteoblastic lineage and the prevention of cells from damage by reactive oxygen species (ROS) remain challenge. Here, we developed osteoinductive and ROS scavenging extracellular matrix (ECM)-mimicking synthetic fibers based on epigallocatechin gallate (EGCG) coating. They were then utilized to fabricate engineered spheroids with human adipose-derived stem cells (hADSCs) for bone tissue regeneation. The EGCG-mineral fibers (EMF) effectively conferred osteoinductive and ROS scavenging signals on the hADSCs within spheroids, demonstrating relative upregulation of antioxidant genes (SOD-1 (25.8±2.1) and GPX-1 (3.3±0.1) and greater level of expression of osteogenic markers, RUNX2 (5.8±0.1) and OPN (5.9±0.1), compared to hADSCs in the spheroids without EMF. The in vitro overexpression of osteogenic genes from hADSCs was achieved from absence of osteogenic supplenments. Furthermore, in vivo transplantation of hADSCs spheroids with the EMF significantly promoted calvarial bone regeneration (48.39±9.24%) compared to that from defect only (17.38±6.63%), suggesting that the stem cell spheroid biofabrication system with our novel mineralization method described here is a promising tool for bone tissue regeneration.

Advanced biomedical applications based on emerging 3D cell culturing platforms

It is of great value to develop reliable in vitro models for cell biology and toxicology. However, ethical issues and the decreasing number of donors restrict the further use of traditional animal models in various fields, including the emerging fields of tissue engineering and regenerative medicine. The huge gap created by the restrictions in animal models has pushed the development of the increasingly recognized three-dimensional (3D) cell culture, which enables cells to closely simulate authentic cellular behaviour such as close cell-to-cell interactions and can achieve higher functionality. Furthermore, 3D cell culturing is superior to the traditional 2D cell culture, which has obvious limitations and cannot closely mimic the structure and architecture of tissues. In this study, we review several methods used to form 3D multicellular spheroids. The extracellular microenvironment of 3D spheroids plays a role in many aspects of biological sciences, including cell signalling, cell growth, cancer cell generation, and anti-cancer drugs. More recently, they have been explored as basic construction units for tissue and organ engineering. We review this field with a focus on the previous research in different areas using spheroid models, emphasizing aqueous two-phase system (ATPS)-based techniques. Multi-cellular spheroids have great potential in the study of biological systems and can closely mimic the in vivo environment. New technologies to form and analyse spheroids such as the aqueous two-phase system and magnetic levitation are rapidly overcoming the technical limitations of spheroids and expanding their applications in tissue engineering and regenerative medicine.

Modular assembly-based approach of loosely packing co-cultured hepatic tissue elements with endothelialization for liver tissue engineering

Background

In liver tissue engineering, co-culturing hepatocytes with typical non-parenchymal hepatic cells to form cell aggregates is available to mimic the in vivo microenvironment and promote cell biological functions. With a modular assembly approach, endothelialized hepatic cell aggregates can be packed for perfusion culture, which enables the construction of large-scale liver tissues. Since tightly packed aggregates tend to fuse with each other and block perfusion flows, a loosely packed mode was introduced in our study.

Methods

Using an oxygen-permeable polydimethylsiloxane (PDMS)-based microwell device, highly dense endothelialized hepatic cell aggregates were generated as hepatic tissue elements by co-culturing hepatocellular carcinoma (HepG2) cells, Swiss 3T3 cells, and human umbilical vein endothelial cells (HUVECs). The co-cultured aggregates were then harvested and applied in a PDMS-fabricated bioreactor for 10 days of perfusion culture. To maintain appropriate interstitial spaces for stable perfusion, biodegradable poly-L-lactic acid (PLLA) scaffold fibers were used and mixed with the aggregates, forming a loosely packed mode.

Results

In a microwell co-culture, Swiss 3T3 cells significantly contributed to the formation of hepatic cell aggregates. HUVECs developed a peripheral distribution in aggregates for endothelialization. In the perfusion culture, compared with pure HepG2 aggregates, HepG2/Swiss 3T3/HUVECs co-cultured aggregates exhibited a higher level of cell proliferation and liver-specific function expression (i.e., glucose consumption and albumin secretion). Under the loosely packed mode, co-cultured aggregates showed a characteristic histological morphology with cell migration and adhesion to fibers. The assembled hepatic tissue elements were obtained with 32% of in vivo cell density.

Conclusions

In a co-culture of HepG2, Swiss 3T3, and HUVECs, Swiss 3T3 cells were observed to be beneficial for the formation of endothelialized hepatic cell aggregates. Loosely packed aggregates enabled long-term perfusion culture with high viability and biological function. This study will guide us in constructing large-scale liver tissue models by way of aggregate-based modular assembly.

3D printed micro-chambers carrying stem cell spheroids and pro-proliferative growth factors for bone tissue regeneration

Three-dimensional (3D)-printed scaffolds have proved to be effective tools for delivering growth factors and cells in bone-tissue engineering. However, delivering spheroids that enhance cellular function remains challenging because the spheroids tend to suffer from low viability, which limits bone regenerationin vivo. Here, we describe a 3D-printed polycaprolactone micro-chamber that can deliver human adipose-derived stem cell spheroids. Anin vitroculture of cells from spheroids in the micro-chamber exhibited greater viability and proliferation compared with cells cultured without the chamber. We coated the surface of the chamber with 500 ng of platelet-derived growth factors (PDGF), and immobilized 50 ng of bone morphogenetic protein 2 (BMP-2) on fragmented fibers, which were incorporated within the spheroids as a new platform for a dual-growth-factor delivery system. The PDGF detached from the chamber within 8 h and the remains were retained on the surface of chamber while the BMP-2 was entrapped by the spheroid. In vitro osteogenic differentiation of the cells from the spheroids in the micro-chamber with dual growth factors enhanced alkaline phosphatase and collagen type 1A expression by factors of 126.7 ± 19.6 and 89.7 ± 0.3, respectively, compared with expression in a micro-chamber with no growth factors. In vivo transplantation of the chambers with dual growth factors into mouse calvarial defects resulted in a 77.0 ± 15.9% of regenerated bone area, while the chamber without growth factors and a defect-only group achieved 7.6 ± 3.9% and 5.0 ± 1.9% of regenerated bone areas, respectively. These findings indicate that a spheroid-loaded micro-chamber supplied with dual growth factors can serve as an effective protein-delivery platform that increases stem-cell functioning and bone regeneration.

Recent Advances on Magnetic Sensitive Hydrogels in Tissue Engineering

Tissue engineering is a promising strategy for the repair and regeneration of damaged tissues or organs. Biomaterials are one of the most important components in tissue engineering. Recently, magnetic hydrogels, which are fabricated using iron oxide-based particles and different types of hydrogel matrices, are becoming more and more attractive in biomedical applications by taking advantage of their biocompatibility, controlled architectures, and smart response to magnetic field remotely. In this literature review, the aim is to summarize the current development of magnetically sensitive smart hydrogels in tissue engineering, which is of great importance but has not yet been comprehensively viewed.