Organotypic 3D decellularized matrix tumor spheroids for high-throughput drug screening

Predicting anti-tumor efficacy of multi-functional nanomedicine on decellularized hepatocellular carcinoma-on-a-chip

Traditional hepatocellular carcinoma-chip models lack the cell structure and microenvironments necessary for high pathophysiological correlation, leading to low accuracy in predicting drug efficacy and high production costs. This study proposed a decellularized hepatocellular carcinoma-on-a-chip model to screen anti-tumor nanomedicine. In this model, human hepatocellular carcinoma (HepG2) and human normal liver cells (L02) were co-cultured on a three-dimensional (3D) decellularized extracellular matrix (dECM) in vitro to mimic the tumor microenvironments of human hepatocellular carcinoma in vivo. Additionally, a smart nanomedicine was developed by encapsulating doxorubicin (DOX) into the ferric oxide (Fe3O4)-incorporated liposome nanovesicle (NLV/Fe+DOX). NLV/Fe+DOX selectively killed 78.59% ± 6.78% of HepG2 cells through targeted delivery and synergistic chemo-chemodynamic-photothermal therapies, while the viability of surrounding L02 cells on the chip model retained high, at over 90.0%. The drug efficacy tested using this unique chip model correlated well with the results of cellular and animal experiments. In summary, our proposed hepatocellular carcinoma-chip model is a low-cost yet accurate drug-testing platform with significant potential for drug screening.

Photoacoustic processing of decellularized extracellular matrix for biofabricating living constructs

The diverse biomolecular landscape of tissue-specific decellularized extracellular matrix (dECM) biomaterials provides a multiplicity of bioinstructive cues to target cells, rendering them highly valuable for various biomedical applications. However, the isolation of dECM biomaterials entails cumbersome xenogeneic enzymatic digestions and also additional inactivation procedures. Such, increases processing time, increments costs and introduces residues of non-naturally present proteins in dECM formulations that remain present even after inactivation. To overcome these limitations, herein we report an innovative conjugation of light and ultrasound-mediated dECM biomaterial processing for fabricating dECM biomaterials. Such approach gathers on ultrasound waves to facilitate dECM-in-liquid processing and visible light photocrosslinking of tyrosine residues naturally present in dECM biomaterials. This dual step methodology unlocked the in-air production of cell laden dECM hydrogels or programmable dECM hydrogel spherical-like beads by using superhydrophobic surfaces. These in-air produced units do not require any additional solvents and successfully supported both fibroblasts and breast cancer cells viability upon encapsulation or surface seeding. In addition, the optimized photoacoustic methodology also enabled a rapid formulation of dECM biomaterial inks with suitable features for biofabricating volumetrically defined living constructs through embedded 3D bioprinting. The biofabricated dECM hydrogel constructs supported cell adhesion, spreading and viability for 7 days. Overall, the implemented photoacoustic processing methodology of dECM biomaterials offers a rapid and universal strategy for upgrading their processing from virtually any tissue. STATEMENT OF SIGNIFICANCE: Leveraging decellularized extracellular matrix (dECM) as cell instructive biomaterials has potential to open new avenues for tissue engineering and in vitro disease modelling. The processing of dECM remains however, lengthy, costly and introduces non-naturally present proteins in the final biomaterials formulations. In this regard, here we report an innovative light and ultrasound two-step methodology that enables rapid dECM-in-liquid processing and downstream photocrosslinking of dECM hydrogel beads and 3D bioprinted constructs. Such photoacoustic based processing constitutes a universally applicable method for processing any type of tissue-derived dECM biomaterials.

Shape-Versatile Fixed Cellular Materials for Multiple Target Immunomodulation

Therapeutic cells are usually administered as living agents, despite the risks of undesired cell migration and acquisition of unpredictable phenotypes. Additionally, most cell-based therapies rely on the administration of single cells, often associated with rapid in vivo clearance. 3D cellular materials may be useful to prolong the effect of cellular therapies and offer the possibility of creating structural volumetric constructs. Here, the manufacturing of shape-versatile fixed cell-based materials with immunomodulatory properties is reported. Living cell aggregates with different shapes (spheres and centimeter-long fibers) are fixed using a method compatible with maintenance of structural integrity, robustness, and flexibility of 3D constructs. The biological properties of living cells can be modulated before fixation, rendering an in vitro anti-inflammatory effect toward human macrophages, in line with a decreased activation of the nuclear factor kappa B (NF-κB) pathway that preponderantly correlated with the surface area of the materials. These findings are further corroborated in vivo in mouse skin wounds. Contact with fixed materials also reduces the proliferation of activated primary T lymphocytes, while promoting regulatory populations. The fixation of cellular constructs is proposed as a versatile phenotypic stabilization method that can be easily implemented to prepare immunomodulatory materials with therapeutic potential.

Human Platelet Lysate-Derived Nanofibrils as Building Blocks to Produce Free-Standing Membranes for Cell Self-Aggregation

Amyloid-like fibrils are garnering keen interest in biotechnology as supramolecular nanofunctional units to be used as biomimetic platforms to control cell behavior. Recent insights into fibril functionality have highlighted their importance in tissue structure, mechanical properties, and improved cell adhesion, emphasizing the need for scalable and high-kinetics fibril synthesis. In this study, we present the instantaneous and bulk formation of amyloid-like nanofibrils from human platelet lysate (PL) using the ionic liquid cholinium tosylate as a fibrillating agent. The instant fibrillation of PL proteins upon supramolecular protein-ionic liquid interactions was confirmed from the protein conformational transition toward cross-β-sheet-rich structures. These nanofibrils were utilized as building blocks for the formation of thin and flexible free-standing membranes via solvent casting to support cell self-aggregation. These PL-derived fibril membranes reveal a nanotopographically rough surface and high stability over 14 days under cell culture conditions. The culture of mesenchymal stem cells or tumor cells on the top of the membrane demonstrated that cells are able to adhere and self-organize in a three-dimensional (3D) spheroid-like microtissue while tightly folding the fibril membrane. Results suggest that nanofibril membrane incorporation in cell aggregates can improve cell viability and metabolic activity, recreating native tissues' organization. Altogether, these PL-derived nanofibril membranes are suitable bioactive platforms to generate 3D cell-guided microtissues, which can be explored as bottom-up strategies to faithfully emulate native tissues in a fully human microenvironment.

Enhancing scaffold-free spheroid models: 3D cell bioprinting method for metastatic HSC3-Oral squamous carcinoma cell line

3D in vitro systems offer advantages over the shortcomings of two-dimensional models by simulating the morphological and functional features of in vivo-like environments, such as cell-cell and cell-extracellular matrix interactions, as well as the co-culture of different cell types. Nevertheless, these systems present technical challenges that limit their potential in cancer research requiring cell line- and culture-dependent standardization. This protocol details the use of a magnetic 3D bioprinting method and other associated techniques (cytotoxicity assay and histological analysis) using oral squamous cell carcinoma cell line, HSC3, which offer advantages compared to existing widely used approaches. This protocol is particularly timely, as it validates magnetic bioprinting as a method for the rapid deployment of 3D cultures as a tool for compound screening and development of heterotypic cultures such as co-culture of oral squamous cell carcinoma cells with cancer-associated fibroblasts (HSC3/CAFs).

Engineering Tumor Stroma Morphogenesis Using Dynamic Cell-Matrix Spheroid Assembly

The tumor microenvironment consists of resident tumor cells organized within a compositionally diverse, three-dimensional (3D) extracellular matrix (ECM) network that cannot be replicated in vitro using bottom-up synthesis. We report a new self-assembly system to engineer ECM-rich 3D MatriSpheres wherein tumor cells actively organize and concentrate microgram quantities of decellularized ECM dispersions which modulate cell phenotype. 3D colorectal cancer (CRC) MatriSpheres were created using decellularized small intestine submucosa (SIS) as an orthotopic ECM source that had greater proteomic homology to CRC tumor ECM than traditional ECM formulations such as Matrigel. SIS ECM was rapidly concentrated from its environment and assembled into ECM-rich 3D stroma-like regions by mouse and human CRC cell lines within 4-5 days via a mechanism that was rheologically distinct from bulk hydrogel formation. Both ECM organization and transcriptional regulation by 3D ECM cues affected programs of malignancy, lipid metabolism, and immunoregulation that corresponded with an in vivo MC38 tumor cell subpopulation identified via single cell RNA sequencing. This 3D modeling approach stimulates tumor specific tissue morphogenesis that incorporates the complexities of both cancer cell and ECM compartments in a scalable, spontaneous assembly process that may further facilitate precision medicine.

Artificial tumor matrices and bioengineered tools for tumoroid generation

The tumor microenvironment (TME) is critical for tumor growth and metastasis. The TME contains cancer-associated cells, tumor matrix, and tumor secretory factors. The fabrication of artificial tumors, so-called tumoroids, is of great significance for the understanding of tumorigenesis and clinical cancer therapy. The assembly of multiple tumor cells and matrix components through interdisciplinary techniques is necessary for the preparation of various tumoroids. This article discusses current methods for constructing tumoroids (tumor tissue slices and tumor cell co-culture) for pre-clinical use. This article focuses on the artificial matrix materials (natural and synthetic materials) and biofabrication techniques (cell assembly, bioengineered tools, bioprinting, and microfluidic devices) used in tumoroids. This article also points out the shortcomings of current tumoroids and potential solutions. This article aims to promotes the next-generation tumoroids and the potential of them in basic research and clinical application.

Advances in screening hyperthermic nanomedicines in 3D tumor models

Hyperthermic nanomedicines are particularly relevant for tackling human cancer, providing a valuable alternative to conventional therapeutics. The early-stage preclinical performance evaluation of such anti-cancer treatments is conventionally performed in flat 2D cell cultures that do not mimic the volumetric heat transfer occurring in human tumors. Recently, improvements in bioengineered 3D in vitro models have unlocked the opportunity to recapitulate major tumor microenvironment hallmarks and generate highly informative readouts that can contribute to accelerating the discovery and validation of efficient hyperthermic treatments. Leveraging on this, herein we aim to showcase the potential of engineered physiomimetic 3D tumor models for evaluating the preclinical efficacy of hyperthermic nanomedicines, featuring the main advantages and design considerations under diverse testing scenarios. The most recent applications of 3D tumor models for screening photo- and/or magnetic nanomedicines will be discussed, either as standalone systems or in combinatorial approaches with other anti-cancer therapeutics. We envision that breakthroughs toward developing multi-functional 3D platforms for hyperthermia onset and follow-up will contribute to a more expedited discovery of top-performing hyperthermic therapies in a preclinical setting before their in vivo screening.

A decellularized matrix enriched collagen microscaffold for a 3D in vitro liver model

The development of liver scaffolds retaining their three-dimensional (3D) structure and extra-cellular matrix (ECM) composition is essential for the advancement of liver tissue engineering. We report the design and validation of an alginate-based platform using a combination of decellularized matrices and collagen to preserve the functionality of liver cells. The scaffolds were characterized using SEM and fluorescence microscopy techniques. The proliferation and functional behaviours of hepatocellular carcinoma HuH7 cells were observed. It was found that the decellularized skin scaffold with collagen was better for maintaining the growth of cells in comparison to other decellularized matrices. In addition, we observed a significant increase in the functional profile once exogenous collagen was added to the liver matrix. Our study also suggests that a cirrhotic liver model should have a different matrix composition as compared to a healthy liver model. When primary rat hepatocytes were used for developing a healthy liver model, the proliferation studies with hepatocytes showed a decellularized skin matrix as the better option, but the functionality was only maintained in a decellularized liver matrix with addition of exogenous collagen. We further checked if these platforms can be used for studying drug induced toxicity observed in the liver by studying the activation of cytochrome P450 upon drug exposure of the cells growing in our model. We observed a significant induction of the CYP1A1 gene on administering the drugs for 6 days. Thus, this platform could be used for drug-toxicity screening studies using primary hepatocytes in a short span of time. Being a microscaffold based system, this platform offers some advantages, such as smaller volumes of samples, analysing multiple samples simultaneously and a minimal amount of decellularized matrix in the matrix composition, making it an economical option compared to a completely dECM based platform.

3D Biomimetic Models to Reconstitute Tumor Microenvironment In Vitro: Spheroids, Organoids, and Tumor-on-a-Chip

Decades of efforts in engineering in vitro cancer models have advanced drug discovery and the insight into cancer biology. However, the establishment of preclinical models that enable fully recapitulating the tumor microenvironment remains challenging owing to its intrinsic complexity. Recent progress in engineering techniques has allowed the development of a new generation of in vitro preclinical models that can recreate complex in vivo tumor microenvironments and accurately predict drug responses, including spheroids, organoids, and tumor-on-a-chip. These biomimetic 3D tumor models are of particular interest as they pave the way for better understanding of cancer biology and accelerating the development of new anticancer therapeutics with reducing animal use. Here, the recent advances in developing these in vitro platforms for cancer modeling and preclinical drug screening, focusing on incorporating hydrogels are reviewed to reconstitute physiologically relevant microenvironments. The combination of spheroids/organoids with microfluidic technologies is also highlighted to better mimic in vivo tumors and discuss the challenges and future directions in the clinical translation of such models for drug screening and personalized medicine.

Mammary Glands of Women, Female Dogs and Female Rats: Similarities and Differences to Be Considered in Breast Cancer Research

Breast cancer is one of the most common and well-known types of cancer among women worldwide and is the most frequent neoplasm in intact female dogs. Female dogs are considered attractive models or studying spontaneous breast cancer, whereas female rats are currently the most widely used animal models for breast cancer research in the laboratory context. Both female dogs and female rats have contributed to the advancement of scientific knowledge in this field, and, in a "One Health" approach, they have allowed broad understanding of specific biopathological pathways, influence of environmental factors and screening/discovery of candidate therapies. This review aims to clearly showcase the similarities and differences among woman, female dog and female rat concerning to anatomical, physiological and histological features of the mammary gland and breast/mammary cancer epidemiology, in order to better portray breast tumorigenesis, and to ensure appropriate conclusions and extrapolation of results among species. We also discuss the major aspects that stand out in these species. The mammary glands of female dogs and women share structural similarities, especially with respect to the lactiferous ducts and lymphatic drainage. In contrast, female rats have only one lactiferous duct per nipple. A comprehensive comparison between humans and dogs is given a special focus, as these species share several aspects in terms of breast/mammary cancer epidemiology, such as age of onset, hormonal etiology, risk factors, and the clinical course of the disease. Holistically, it is clear that each species has advantages and limitations that researchers must consider during the development of experimental designs and data analysis.

Multidimensional controllable fabrication of tumor spheroids based on a microfluidic device

Multicellular tumor spheroids (MCTSs) are in vitro solid tumor models with physiological relevance. To achieve robust process control, a MCTS fabrication method that combines cell membrane engineering and droplet microfluidic techniques is designed. The fluidic control and the chemical interactions between biotin and streptavidin enable artificial cell aggregation to be accomplished in seconds. Then, spheroids with a uniform size are fabricated within alginate microcapsules. Microfluidic mixing-based cell aggregation regulates the cell aggregate size and the spheroid composition, and the microcapsules regulate the size of spheroids from 120 to 180 μm. The method shows applicability for various cancer cell lines, including HCT116, HepG2, and A549. In addition, composite colon cancer spheroids consisting of HCT116 and NIH3T3 with predetermined cell ratios and uniform distributions are produced. The generated MCTSs are assessed using the ELISA and UPLC-MS/MS techniques. The release of vascular endothelial growth factor (VEGF) and the 5-fluorouracil (5-FU) resistance differ in the monotypic and cocultured colon cancer models. Our method provides a robust way to produce consistent and customized MCTSs in cancer research and drug screening.

Decellularized brain extracellular matrix slice glioblastoma culture model recapitulates the interaction between cells and the extracellular matrix without a nutrient-oxygen gradient interference

Decellularized extracellular matrix (dECM) is a valuable tool for generating three-dimensional in vitro tumor models that effectively recapitulate tumor-extracellular matrix (ECM) interactions. However, in current culture models, the components and structures of dECM are enzymatically disrupted to form hydrogels, making it difficult to recapitulate the native ECM. Additionally, when studying ECM-cell interactions, large-volume tumor culture models are incompatible with traditional experimental techniques and the nutrient-oxygen concentration gradient, which is a significant confounding factor. To address these issues, we developed a decellularized brain extracellular matrix slice (dBECMS) glioblastoma (GBM) culture model. This model possesses good light transmittance and substance diffusivity, making it compatible with traditional experimental techniques without forming nutrient-oxygen concentration gradients. Through transcriptomic analysis, we found that native brain ECM has a broad impact on glioma cells; the impact involves the ECM-ECM receptor interactions and the ECM and metabolic reprogramming. Further experiments demonstrated that dBECMS promoted glucose consumption and lactate production in GBM cells. Silver staining experiments revealed abundant proteins in the media of dBECMS, suggesting the degradation of the brain ECM by GBM cells. Transcriptome analysis also showed that the dBECMS-GBM culture model more accurately recapitulated the transcriptional profile of GBM than the two-dimensional culture. We experimentally demonstrated that the dBECMS-GBM model enhanced the resistance of GBM cells to temozolomide and increased the stemness of GBM cells. Additionally, we demonstrated the feasibility of the dBECMS-GBM model as a platform for drug response modeling. STATEMENT OF SIGNIFICANCE: The decellularized brain extracellular matrix (ECM) slice glioblastoma culture model mimics the interaction between native brain ECM and glioblastoma when glioblastoma infiltrates the brain and reveals the effects of native brain ECM on glioblastoma metabolism, ECM reprogramming, drug responsiveness, and stemness.

Polymeric Gel Scaffolds and Biomimetic Environments for Wound Healing

Infected wounds that do not heal are a worldwide problem that is worsening, with more people dying and more money being spent on care. For any disease to be managed effectively, its root cause must be addressed. Effective wound care becomes a bigger problem when various traditional wound healing methods and products may not only fail to promote good healing. Still, it may also hinder the healing process, causing wounds to stay open longer. Progress in tissue regeneration has led to developing three-dimensional scaffolds (3D) or constructs that can be leveraged to facilitate cell growth and regeneration while preventing infection and accelerating wound healing. Tissue regeneration uses natural and fabricated biomaterials that encourage the growth of tissues or organs. Even though the clinical need is urgent, the demand for polymer-based therapeutic techniques for skin tissue abnormalities has grown quickly. Hydrogel scaffolds have become one of the most imperative 3D cross-linked scaffolds for tissue regeneration because they can hold water perfectly and are porous, biocompatible, biodegradable, and biomimetic. For damaged organs or tissues to heal well, the porosity topography of the natural extracellular matrix (ECM) should be imitated. This review details the scaffolds that heal wounds and helps skin tissue to develop. After a brief overview of the bioactive and drug-loaded polymeric hydrogels, the discussion moves on to how the scaffolds are made and what they are made of. It highlights the present uses of in vitro and in-vivo employed biomimetic scaffolds. The prospects of how well bioactiveloaded hydrogels heal wounds and how nanotechnology assists in healing and regeneration have been discussed.

Biofabrication, biochemical profiling, and in vitro applications of salivary gland decellularized matrices via magnetic bioassembly platforms

Trending three-dimensional tissue engineering platforms developed via biofabrication and bioprinting of exocrine glands are on the rise due to a commitment to organogenesis principles. Nevertheless, a proper extracellular matrix (ECM) microarchitecture to harbor primary cells is yet to be established towards human salivary gland (SG) organogenesis. By using porcine submandibular gland (SMG) biopsies as a proof-of-concept to mimic the human SG, a new decellularized ECM bioassembly platform was developed herein with varying perfusions of sodium dodecyl sulfate (SDS) to limit denaturing events and ensure proper preservation of the native ECM biochemical niche. Porcine SMG biopsies were perfused with 0.01%, 0.1%, and 1% SDS and bio-assembled magnetically in porous polycarbonate track-etched (PCTE) membrane. Double-stranded DNA (dsDNA), cell removal efficiency, and ECM biochemical contents were analyzed. SDS at 0.1% and 1% efficiently removed dsDNA (< 50 ng/mg) and preserved key matrix components (sulfated glycosaminoglycans, collagens, elastin) and the microarchitecture of native SMG ECM. Bio-assembled SMG decellularized ECM (dECM) perfused with 0.1-1% SDS enhanced cell viability, proliferation, expansion confluency rates, and tethering of primary SMG cells during 7 culture days. Perfusion with 1% SDS promoted greater cell proliferation rates while 0.1% SDS supported higher acinar epithelial expression when compared to basement membrane extract and other substrates. Thus, this dECM magnetic bioassembly strategy was effective for decellularization while retaining the original ECM biochemical niche and promoting SMG cell proliferation, expansion, differentiation, and tethering. Altogether, these outcomes pave the way towards the recellularization of this novel SMG dECM in future in vitro and in vivo applications.

The Study of the Extracellular Matrix in Chronic Inflammation: A Way to Prevent Cancer Initiation?

Bidirectional communication between cells and their microenvironment has a key function in normal tissue homeostasis, and in disease initiation, progression and a patient's prognosis, at the very least. The extracellular matrix (ECM), as an element of all tissues and cellular microenvironment, is a frequently overlooked component implicated in the pathogenesis and progression of several diseases. In the inflammatory microenvironment (IME), different alterations resulting from remodeling processes can affect ECM, progressively inducing cancer initiation and the passage toward a tumor microenvironment (TME). Indeed, it has been demonstrated that altered ECM components interact with a variety of surface receptors triggering intracellular signaling that affect cellular pathways in turn. This review aims to support the notion that the ECM and its alterations actively participate in the promotion of chronic inflammation and cancer initiation. In conclusion, some data obtained in cancer research with the employment of decellularized ECM (dECM) models are described. The reported results encourage the application of dECM models to investigate the short circuits contributing to the creation of distinct IME, thus representing a potential tool to avoid the progression toward a malignant lesion.

Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering

The multidisciplinary fields of tissue engineering and regenerative medicine have the potential to revolutionize the practise of medicine through the abilities to repair, regenerate, or replace tissues and organs with functional engineered constructs. To this end, tissue engineering combines scaffolding materials with cells and biologically active molecules into constructs with the appropriate structures and properties for tissue/organ regeneration, where scaffolding materials and biomolecules are the keys to mimic the native extracellular matrix (ECM). For this, one emerging way is to decellularize the native ECM into the materials suitable for, directly or in combination with other materials, creating functional constructs. Over the past decade, decellularized ECM (or dECM) has greatly facilitated the advance of tissue engineering and regenerative medicine, while being challenged in many ways. This article reviews the recent development of dECM for tissue engineering and regenerative medicine, with a focus on the preparation of dECM along with its influence on cell culture, the modification of dECM for use as a scaffolding material, and the novel techniques and emerging trends in processing dECM into functional constructs. We highlight the success of dECM and constructs in the in vitro, in vivo, and clinical applications and further identify the key issues and challenges involved, along with a discussion of future research directions.

Development and characterisation of 3D collagen-gelatin based scaffolds for breast cancer research

While 2D culture presents a useful tool for cancer research, it fails to replicate the tumor microenvironment as it lacks proper three-dimensional cell-cell/cell-matrix interactions, often resulting in exaggerated responses to therapeutic agents. 3D models that aim to overcome the issues associated with 2D culture research offer a new frontier for cancer research with cell growth, morphology and genetic properties that more closely match in vivo cancers. Herein, we aim to develop a collagen-based scaffold that supports the attachment and proliferation of breast cancer (BC) cells as a 3D culture model. Scaffolds were produced on a repeatable basis using a freeze-drying procedure. The constructs were highly porous (>99%) with homogenous pore sizes (150-300 μm) and an interconnected structure. The application of 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDAC) crosslinking resulted in scaffolds with elastic moduli in the range of 1-2 kPa, mimicking cancerous breast tissue stiffness. Furthermore, the incorporation of gelatin into the scaffolds enabled the porosity, pore size and mechanical properties to be tailored, resulting in scaffolds with stiffness values that accurately replicate the stiffness of human BC extracellular matrix (ECM) (1.3-1.7 kPa). Scaffolds displayed high in vitro stability with 90% of mass remaining after 14 days of culture. The scaffolds were shown to be highly biocompatible, and capable of supporting the attachment, infiltration and proliferation of MCF7 breast cancer (BC) cells over +14 days. These results confirm the suitability of these scaffolds as culture models for BC cells. These collagen-based scaffolds offer significant potential for the exploration of aspects of BC, such as gene expression profiles and patterns, and for the assessment of the efficacy of therapeutic agents in treating BC.

Decellularization of xenografted tumors provides cell-specific in vitro 3D environment

In vitro cell culture studies are common in the cancer research field, and reliable biomimetic 3D models are needed to ensure physiological relevance. In this manuscript, we hypothesized that decellularized xenograft tumors can serve as an optimal 3D substrate to generate a top-down approach for in vitro tumor modeling. Multiple tumor cell lines were xenografted and the formed solid tumors were recovered for their decellularization by several techniques and further characterization by histology and proteomics techniques. Selected decellularized tumor xenograft samples were seeded with the HCC1806 human triple-negative breast cancer (TNBC) basal-like subtype cell line, and cell behavior was compared among them and with other control 2D and 3D cell culture methods. A soft treatment using Freeze-EDTA-DNAse allows proper decellularization of xenografted tumor samples. Interestingly, proteomic data show that samples decellularized from TNBC basal-like subtype xenograft models had different extracellular matrix (ECM) compositions compared to the rest of the xenograft tumors tested. The in vitro recellularization of decellularized ECM (dECM) yields tumor-type–specific cell behavior in the TNBC context. Data show that dECM derived from xenograft tumors is a feasible substrate for reseeding purposes, thereby promoting tumor-type–specific cell behavior. These data serve as a proof-of-concept for further potential generation of patient-specific in vitro research models.

Decellularized normal and cancer tissues as tools for cancer research

Today it is widely accepted that molecular mechanisms triggering cancer initiate with a genetic modification. However, a genetic alteration providing the aberrant clone with a growing advantage over neighboring cells is not sufficient to develop cancer. Currently, tumors are considered a heterogeneous population of cells and an extracellular matrix (ECM) that make up a characteristic microenvironment. Interactions between tumor cells and cancer microenvironment define cancer progression and therapeutic response. To investigate and clarify the role of ECM in the regulation of cancer cell behavior and response to therapy, the decellularization of ECM, a widely used technique in tissue engineering, has been recently employed to develop 3D culture model of disease. In this review, we briefly explore the different components of healthy and pathological ECM and the methods to obtain and characterize the ECM from native bioptic tissue. Finally, we highlight the most relevant applications of ECM in translational cancer research strategies: decellularized ECM, ECM-hydrogel and 3D bioprinting.

Trends in Tissue Bioprinting, Cell-Laden Bioink Formulation, and Cell Tracking

Use of three-dimensional bioprinting for the in vitro engineering of tissues has boomed during the past five years. An increasing number of commercial bioinks are available, with suitable mechanical and rheological characteristics and excellent biocompatibility. However, cell-laden bioinks based on a single polymer do not properly mimic the complex extracellular environment needed to tune cell behavior, as required for tissue and organ formation. Processes such as cell aggregation, migration, and tissue patterning should be dynamically monitored, and progress is being made in these areas, most prominently derived from nanoscience. We review recent developments in tissue bioprinting, cellularized bioink formulation, and cell tracking, from both chemistry and cell biology perspectives. We conclude that an interdisciplinary approach including expertise in polymer science, nanoscience, and cell biology/tissue engineering is required to drive further advancements in this field toward clinical application.

Microfluidics meets 3D cancer cell migration

An early step of metastasis requires a complex and coordinated migration of invasive tumor cells into the surrounding tumor microenvironment (TME), which contains extracellular matrix (ECM). It is being appreciated that 3D matrix-based microfluidic models have an advantage over conventional in vitro and animal models to study tumor progression events. Recent microfluidic models have enabled recapitulation of key mechanobiological features present within the TME to investigate collective cancer cell migration and invasion. Microfluidics also allows for functional interrogation and therapeutic manipulation of specific steps to study the dynamic aspects of tumor progression. In this review, we focus on recent developments in cancer cell migration and how microfluidic strategies have evolved to address the physiological complexities of the TME to visualize migration modes adapted by various tumor cells.

3D bioprinted drug-resistant breast cancer spheroids for quantitative in situ evaluation of drug resistance

Drug-resistant cancer spheroids were fabricated by three-dimensional (3D) bioprinting for the quantitative evaluation of drug resistance of cancer cells, which is a very important issue in cancer treatment. Cancer spheroids have received great attention as a powerful in vitro model to replace animal experiments because of their ability to mimic the tumor microenvironment. In this work, the extrusion printing of gelatin-alginate hydrogel containing MCF-7 breast cancer stem cells successfully provided 3D growth of many single drug-resistant breast cancer spheroids in a cost-effective 3D-printed mini-well dish. The drug-resistant MCF-7 breast cancer spheroids were able to maintain their drug-resistant phenotype of CD44^high/CD24^low/ALDH1^high in the gelatin-alginate media during 3D culture and exhibited higher expression levels of drug resistance markers, such as GRP78 chaperon and ABCG2 transporter, than bulk MCF-7 breast cancer spheroids. Furthermore, the effective concentration 50 (EC₅₀) values for apoptotic and necrotic spheroid death could be directly determined from the 3D printed-gelatin-alginate gel matrix based on in situ 3D fluorescence imaging of cancer spheroids located out of the focal point and on the focal point. The EC₅₀ values of anti-tumor agents (camptothecin and paclitaxel) for apoptotic and necrotic drug-resistant cancer spheroid death were higher than those for bulk cancer spheroid death, indicating a greater drug resistance. STATEMENT OF SIGNIFICANCE: This study proposed a novel 3D bioprinting-based drug screening model, to quantitatively evaluate the efficacy of anticancer drugs using drug-resistant MCF-7 breast cancer spheroids formed within a 3D-printed hydrogel. Quantitative determination of anticancer drug efficacy using EC₅₀, which is extremely important in drug discovery, was achieved by 3D printing that enables concurrent growth of many single spheroids efficiently. This study verified whether drug-resistant cancer spheroids grown within 3D-printed gelatin-alginate hydrogel could maintain and present drug resistance. Also, the EC₅₀ values of the apoptotic and necrotic cell deaths were directly acquired in 3D-embedded spheroids based on in situ fluorescence imaging. This platform provides a single-step straightforward strategy to cultivate and characterize drug-resistant spheroids to facilitate anticancer drug screening.

The ECM: To Scaffold, or Not to Scaffold, That Is the Question

The extracellular matrix (ECM) has pleiotropic effects, ranging from cell adhesion to cell survival. In tissue engineering, the use of ECM and ECM-like scaffolds has separated the field into two distinct areas-scaffold-based and scaffold-free. Scaffold-free techniques are used in creating reproducible cell aggregates which have massive potential for high-throughput, reproducible drug screening and disease modeling. Though, the lack of ECM prevents certain cells from surviving and proliferating. Thus, tissue engineers use scaffolds to mimic the native ECM and produce organotypic models which show more reliability in disease modeling. However, scaffold-based techniques come at a trade-off of reproducibility and throughput. To bridge the tissue engineering dichotomy, we posit that finding novel ways to incorporate the ECM in scaffold-free cultures can synergize these two disparate techniques.

Simultaneous 2D and 3D cell culture array for multicellular geometry, drug discovery and tumor microenvironment reconstruction

Cell culture systems are indispensablein vitrotools for biomedical research. Although conventional two-dimensional (2D) cell cultures are still used for most biomedical and biological studies, the three-dimensional (3D) cell culture technology attracts increasing attention from researchers, especially in cancer and stem cell research. Due to the different spatial structures, cells in 2D and 3D cultures exhibit different biochemical and biophysical phenotypes. Therefore, a new platform with both 2D and 3D cell cultures is needed to bridge the gap between 2D and 3D cell-based assays. Here, a simultaneous 2D and 3D cell culture array system was constructed by microprinting technology, in which cancer cells exhibited heterozygous geometry structures with both 2D monolayers and 3D spheroids. Cells grown in 3D spheroids showed higher proliferation ability and stronger cell-cell adhesion. Spheroids derived from various types of cancer cell lines exhibited distinct morphologies through a geometrical confinement stimulated biomechanical transduction. Z-projected images of cancer cell aggregates were used to analyze 3D multicellular architecture features. Notably, by using a support vector machine classifier, we distinguished tumor cells from normal cells with an accuracy greater than 95%, according to the geometrical features of multicellular spheroids in phase contrast microscopy images. Cancer cells in multicellular spheroid arrays exhibited higher drug resistance of anticancer drug cisplatin than cells grown in 2D cultures. Finally, we developed a co-culture system composed of tumor spheroid arrays, fibroblast cells and photo-crosslinkable gelatin methacryloyl hydrogel to mimic tumor microenvironment which consisted of solid tumor massed, surrounding stromal cells and extracellular matrix. Together, our newly developed simultaneous 2D and 3D cell culture array has great potential in comprehensive evaluation of cellular events in both 2D and 3D, rapid production of spheroid arrays and multicellular geometry-based tumor cell detection.