Silica nanoparticles: Biomedical applications and toxicity

Silica's silent threat: Contributing to skin fibrosis in systemic sclerosis by targeting the HDAC4/Smad2/3 pathway

Nowadays, silica products are widely used in daily life, especially in skin applications, which inevitably increases the risk of silica exposure in general population. However, inadequate awareness of silica's potential hazards and lack of self-protection are of concern. Systemic sclerosis (SSc) is characterized by progressive tissue fibrosis under environmental and genetic interactions. Silica exposure is considered an important causative factor for SSc, but its pathogenesis remains unclear. Within this study, we showed that lower doses of silica significantly promoted the proliferation, migration, and activation of human skin fibroblasts (HSFs) within 24 h. Silica injected subcutaneously into mice induced and exacerbated skin fibrosis. Notably, silica increased histone deacetylase-4 (HDAC4) expression by inducing its DNA hypomethylation in normal HSFs. The elevated HDAC4 expression was also confirmed in SSc HSFs. Furthermore, HDAC4 was positively correlated with Smad2/3 phosphorylation and COL1, α-SMA, and CTGF expression. The HDAC4 inhibitor LMK235 mitigated silica-induced upregulation of these factors and alleviated skin fibrosis in SSc mice. Taken together, silica induces and exacerbates skin fibrosis in SSc patients by targeting the HDAC4/Smad2/3 pathway. Our findings provide new insights for evaluating the health hazards of silica exposure and identify HDAC4 as a potential interventional target for silica-induced SSc skin fibrosis.

Strategies to Regulate the Degradation and Clearance of Mesoporous Silica Nanoparticles: A Review

Mesoporous silica nanoparticles (MSNs) have attracted extensive attention as drug delivery systems because of their unique meso-structural features (high specific surface area, large pore volume, and tunable pore structure), easily modified surface, high drug-loading capacity, and sustained-release profiles. However, the enduring and non-specific enrichment of MSNs in healthy tissues may lead to toxicity due to their slow degradability and hinder their clinical application. The emergence of degradable MSNs provided a solution to this problem. The understanding of strategies to regulate degradation and clearance of these MSNs for promoting clinical trials and expanding their biological applications is essential. Here, a diverse variety of degradable MSNs regarding considerations of physiochemical properties and doping strategies of degradation, the biodistribution of MSNs in vivo, internal clearance mechanism, and adjusting physical parameters of clearance are highlighted. Finally, an overview of these degradable and clearable MSNs strategies for biosafety is provided along with an outlook of the encountered challenges.

Progress of nanoparticle drug delivery system for the treatment of glioma

Gliomas are typical malignant brain tumours affecting a wide population worldwide. Operation, as the common treatment for gliomas, is always accompanied by postoperative drug chemotherapy, but cannot cure patients. The main challenges are chemotherapeutic drugs have low blood-brain barrier passage rate and a lot of serious adverse effects, meanwhile, they have difficulty targeting glioma issues. Nowadays, the emergence of nanoparticles (NPs) drug delivery systems (NDDS) has provided a new promising approach for the treatment of gliomas owing to their excellent biodegradability, high stability, good biocompatibility, low toxicity, and minimal adverse effects. Herein, we reviewed the types and delivery mechanisms of NPs currently used in gliomas, including passive and active brain targeting drug delivery. In particular, we primarily focused on various hopeful types of NPs (such as liposome, chitosan, ferritin, graphene oxide, silica nanoparticle, nanogel, neutrophil, and adeno-associated virus), and discussed their advantages, disadvantages, and progress in preclinical trials. Moreover, we outlined the clinical trials of NPs applied in gliomas. According to this review, we provide an outlook of the prospects of NDDS for treating gliomas and summarise some methods that can enhance the targeting specificity and safety of NPs, like surface modification and conjugating ligands and peptides. Although there are still some limitations of these NPs, NDDS will offer the potential for curing glioma patients.

Changes in fruit yield, biochemical attributes, and leaf minerals of different cucumber (Cucumis sativus L.) cultivars under foliar application of silicon nanoparticles

Silicon nanoparticles (Si NPs) have an eminent role in improving plant yield through improving yield. The present study was conducted to find the effect of Si NPs on plant yield, biochemical attributes, and minerals of different cucumber cultivars. The greenhouse experiment with foliar application of Si NPs (100, 200, and 300 mg L-1) was carried out on cucumber cultivars (Emilie, Mirsoltan, Mitio, and Viola). The application of Si NPs at 300 mg L-1 led to the highest fruit yield, with a 17% increase in fruit production compared to the control. Fruit firmness differed by 31% between Emilie and Si NPs at 100 mg L-1 and Mito at 300 mg L-1. Plants experiencing Si NPs at 300 mg L-1 had the greatest chlorophyll (Chl) a+b. Compared to the other cultivars, Mito had a greater fruit yield and Chl content. The Si NPs increased TSS by 11% while lowering TA by 24% when compared to the control at 300 mg L-1. Foliar application of Si NPs reduced the value of TSS/TA. The largest value of K was reached in the Mito cultivar with Si NPs at 200 mg L-1, with a 22% increase in comparison to the control, indicating that Si NPs considerably boosted the K content. The Si NPs at 200 mg L-1 significantly increased leaf N and P in the Mito cultivar by 16 and 50%, respectively. By using agglomerative hierarchy clustering (AHC), Emilie and Mito were located in two separate clusters, whilst Viola and Mirsoltan were grouped in one cluster. In conclusion, Si NPs at 200-300 mg L-1 enhanced fruit yield, and Mito showed the highest yield when compared to other cultivars.

Liposome-encapsulated cytochrome P450 and gibberellic acid biosynthesis in Priestia megaterium RP1

This study explores the potential of liposome encapsulated silica immobilized cytochrome P450 monooxygenase (LSICY) for bioremediation of mercury (Hg2+). Current limitations in Hg2+ reduction, including sensitivity to factors like pH and cost, necessitate alternative methods. We propose LSICY as a solution, leveraging the enzymatic activities of cytochrome P450 monooxygenase (CYPM) for Hg2+ reduction through hydroxylation and oxygenation. Our investigation employs LSICY to assess its efficacy in mitigating Hg2+ toxicity in Oryza sativa (rice) plants. Gas chromatography confirmed gibberellic acid (GA) presence in the Hg2+ reducing bacteria Priestia megaterium RP1 (PMRP1), highlighting a potential link between CYP450 activity and plant health. This study demonstrates the promise of LSICY as a sustainable and effective approach for Hg2+ bioremediation, promoting a safer soil environment.

Antifouling nanoplatform for controlled attachment ofE. coli

Biofouling is the most common cause of bacterial contamination in implanted materials/devices resulting in severe inflammation, implant mobilization, and eventual failure. Since bacterial attachment represents the initial step toward biofouling, developing synthetic surfaces that prevent bacterial adhesion is of keen interest in biomaterials research. In this study, we develop antifouling nanoplatforms that effectively impede bacterial adhesion and the consequent biofilm formation. We synthesize the antifouling nanoplatform by introducing silicon (Si)/silica nanoassemblies to the surface through ultrafast ionization of Si substrates. We assess the effectiveness of these nanoplatforms in inhibitingEscherichia coli(E. coli) adhesion. The findings reveal a significant reduction in bacterial attachment on the nanoplatform compared to untreated silicon, with bacteria forming smaller colonies. By manipulating physicochemical characteristics such as nanoassembly size/concentration and nanovoid size, we further control bacterial attachment. These findings suggest the potential of our synthesized nanoplatform in developing biomedical implants/devices with improved antifouling properties.

Synthesis and Characterization of Boronate Affinity Three-Dimensionally Ordered Macroporous Materials

Sample pretreatment is a key step for qualitative and quantitative analysis of trace substances in complex samples. Cis-dihydroxyl (cis-diol) group-containing substances exist widely in biological samples and can be selectively bound by boronate affinity adsorbents. Based on this, in this article, we proposed a simple method for the preparation of novel spherical three-dimensionally ordered macropore (3DOM) materials based on a combination of the boronate affinity technique and colloidal crystal template method. The prepared 3DOM materials were characterized using Fourier transform-infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and thermo-gravimetric analysis, and results showed that they possessed the characteristics of a high specific surface area, high porosity, and more boronic acid recognition sites. The adsorption performance evaluation results showed that the maximum adsorption capacity of the boron affinity 3DOMs on ovalbumin (OVA) could reach to 438.79 mg/g. Kinetic and isothermal adsorption experiments indicated that the boronate affinity 3DOM material exhibited a high affinity and selectivity towards OVA and adenosine. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of the proteins in egg whites was conducted and proved that the glycoprotein in the egg whites could be separated and enriched with a good performance. Therefore, a novel boronate affinity 3DOM material a with highly ordered and interconnected pore structure was prepared and could be applied in the separation and enrichment of molecules with cis-diol groups from complex samples with a good selectivity, efficiency, and high throughput.

Biocompatibility Analysis of Bio-Based and Synthetic Silica Nanoparticles during Early Zebrafish Development

During the twenty-first century, engineered nanomaterials (ENMs) have attracted rising interest, globally revolutionizing all industrial sectors. The expanding world population and the implementation of new global policies are increasingly pushing society toward a bioeconomy, focused on fostering the adoption of bio-based nanomaterials that are functional, cost-effective, and potentially secure to be implied in different areas, the medical field included. This research was focused on silica nanoparticles (SiO2-NPs) of bio-based and synthetic origin. SiO2-NPs are composed of silicon dioxide, the most abundant compound on Earth. Due to their characteristics and biocompatibility, they are widely used in many applications, including the food industry, synthetic processes, medical diagnosis, and drug delivery. Using zebrafish embryos as in vivo models, we evaluated the effects of amorphous silica bio-based NPs from rice husk (SiO2-RHSK NPs) compared to commercial hydrophilic fumed silica NPs (SiO2-Aerosil200). We evaluated the outcomes of embryo exposure to both nanoparticles (NPs) at the histochemical and molecular levels to assess their safety profile, including developmental toxicity, neurotoxicity, and pro-inflammatory potential. The results showed differences between the two silica NPs, highlighting that bio-based SiO2-RHSK NPs do not significantly affect neutrophils, macrophages, or other innate immune system cells.

Structural elucidation and development of azelaic acid loaded mesoporous silica nanoparticles infused gel: Revolutionizing nanodrug delivery for cosmetics and pharmaceuticals

This research aimed to enhance dermal delivery and optimize depigmentation therapy by designing mesoporous silica nanoparticles (MSNs) encapsulating azelaic acid (AZA) within a gel matrix. The MSNs were prepared using the sol-gel method. After subsequent processes, including acid extraction and drug loading, were then elucidated through PDI, size, zeta-potential, entrapment efficiency, nitrogen adsorption assay, FE-SEM, thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and tyrosinase inhibition assay, were employed to assess the formulation. In-vitro stability tests for both AZA-MSN gel (AZCG) and AZA-loaded mesoporous silica gel (AZMG) were conducted at 8 °C, 25 °C, 40 °C, and 40 °C + 75 % RH, encompassing assessments of color, liquefaction, pH, and conductivity. Our findings showed a notable entrapment efficiency of 93.46 % for AZA-MSNs, with FE-SEM illustrating porous spherical MSNs. The particle size of AZA-MSNs was determined to be 211.9 nm, with a pore size of 2.47 nm and XRD analysis confirmed the amorphous state of AZA within the MSN carriers. Rheology examination indicated a non-Newtonian flow, while ex-vivo rat skin permeation studies conducted in a phosphate buffer (pH = 5.5) demonstrated a biphasic release pattern with 85.53 % cumulative drug permeation for AZA-MSNs. Overall, the study endorse the potential of AZA-MSNs as an efficacious and stable formulation for AZA delivery, highlighting their promise in addressing pigmentation concerns compared to conventional approaches.

Sustainable Approaches in Green Synthesis of Silica Nanoparticles Using Extracts of Chlorella and Its Application

Silica nanoparticles, also known as SiO2 nanoparticles, have wider applications in biomedical, building, water treatment, agriculture, and food industries. It is used as an anticaking agent in the food industry, used to remove heavy metals from water, and used in cement-based materials. SiO2 nanoparticles synthesized by physical and chemical methods require high energy and use of toxic chemicals which is quite expensive, have a greater impact causing health-related issues, and have environmental side effects. Hence, there is a need to synthesize nanoparticles in an eco-friendly way. The biological or green synthesis method uses microbes, such as bacteria, fungi, algae, and plants for synthesizing nanoparticles. Algae contain natural biochemicals that act as reducing agents. These biomolecules are non-toxic as they are naturally occurring compounds and can be used to fabricate nanoparticles by avoiding the use of toxic chemicals in an eco-friendly method. In this study, silica nanoparticles were synthesized by green synthesis methods using microalgae extract. Further, the green synthesized silica nanoparticles were characterized using ultra violet-visible (UV-VIS) spectroscopy, Fourier transform-infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray analysis (EDAX). The antimicrobial activity of the silica nanoparticles against E. coli was studied. This study revealed that the nanoparticles can be synthesized using green synthesis methods with low cost, less toxic chemicals, eco-friendly, and have antimicrobial activity against E. coli.

Recent advances of nanoparticles on bone tissue engineering and bone cells

With the development of biotechnology, biomaterials have been rapidly developed and shown great potential in bone regeneration therapy and bone tissue engineering. Nanoparticles have attracted the attention of researches and have applied in various fields especially in the biomedical field as the special physicochemical properties. Nanoparticles were found to regulate bone remodeling depending on their size, shape, composition, and charge. Therefore, in-depth research was necessary to provide the basic support to select the most suitable nanoparticles for bone relate diseases treatment. This article reviews the current development of nanoparticles in bone tissue engineering, focusing on drug delivery, gene delivery, and cell labeling. In addition, the research progress on the interaction of nanoparticles with bone cells, focusing on osteoblasts, osteoclasts, and bone marrow mesenchymal stem cells, and the underlying mechanism were also reviewed. Finally, the current challenges and future research directions are discussed. Thus, detailed study of nanoparticles may reveal new therapeutic strategies to improve the effectiveness of bone regeneration therapy or other bone diseases.

Biosafety consideration of nanocellulose in biomedical applications: A review

Nanocellulose-based biomaterials have gained significant attention in various fields, especially in medical and pharmaceutical areas, due to their unique properties, including non-toxicity, high specific surface area, biodegradability, biocompatibility, and abundant feasible and sophisticated strategies for functional modification. The biosafety of nanocellulose itself is a prerequisite to ensure the safe and effective application of biomaterials as they interact with living cells, tissues, and organs at the nanoscale. Potential residual endogenous impurities and exogenous contaminants could lead to the failure of the intended functionalities or even serious health complications if they are not adequately removed and assessed before use. This review summarizes the sources of impurities in nanocellulose that may pose potential hazards to their biosafety, including endogenous impurities that co-exist in the cellulosic raw materials themselves and exogenous contaminants caused by external exposure. Strategies to reduce or completely remove these impurities are outlined and classified as chemical, physical, biological, and combined methods. Additionally, key points that require careful consideration in the interpretation of the biosafety evaluation outcomes were discussed to ensure the safety and effectiveness of the nanocellulose-based biomaterials in medical applications.

Abiotic weathering of plastic: Experimental contributions towards understanding the formation of microplastics and other plastic related particulate pollutants

The increasing use of plastic (synthetic polymers) results in the release of uncontrollable amounts of synthetic materials into the environment through waste, infrastructure, and essential goods. As plastic materials undergo weathering, a complex process unfolds, leading to the formation of pollutants, notably microplastics. This study employs multiple instrumental methods to explore the intricate abiotic degradation of the five most commonly used synthetic polymers in environmentally relevant conditions. An extensive set of analytical techniques, along with chemometric analysis of the results of Raman spectroscopy, was used to characterize the materials and evaluate the nature and extent of degradation caused by artificial weathering under temperature, humidity, and solar-like irradiation cycles. Investigation focuses on the link between abiotic weathering and the generation of micro- and nanoplastics, accompanied by molecular and surface adhesion changes, and the release of additives such as metals and metal oxides. Research reveals that microplastics may exhibit varied physical properties due to the incorporation of significant quantities of high-density additives from the parent plastic, which might influence the extraction methods and the transportation models' accuracy. At the molecular and microscopic scales, non-homogeneous pathways through which plastic decomposes during weathering were observed. The formation of additive-polymer combinations might play a pivotal role in the monitoring approaches for microplastics, presenting unique challenges in assessing the environmental impact of different plastic types. These findings offer complex insight into abiotic weathering, microplastics' generation, and the influence of additives that were previously overlooked in toxicity and health assessment studies. As plastic pollution continues to escalate, understanding these complex processes is crucial for microplastic monitoring development and adopting effective preventative measures.

Exploiting the Photo-Physical Properties of Metal Halide Perovskite Nanocrystals for Bioimaging

Perovskite nanomaterials have recently been exploited for bioimaging applications due to their unique photo-physical properties, including high absorbance, good photostability, narrow emissions, and nonlinear optical properties. These attributes outperform conventional fluorescent materials such as organic dyes and metal chalcogenide quantum dots and endow them with the potential to reshape a wide array of bioimaging modalities. Yet, their full potential necessitates a deep grasp of their structure-attribute relationship and strategies for enhancing water stability through surface engineering for meeting the stringent and unique requirements of each individual imaging modality. This review delves into this evolving frontier, highlighting how their distinctive photo-physical properties can be leveraged and optimized for various bioimaging modalities, including visible light imaging, near-infrared imaging, and super-resolution imaging.

Advances in the study of silica nanoparticles in lung diseases

Silicon dioxide nanoparticles (SiNPs) are one of the major forms of silicon dioxide and are composed of the most-abundant compounds on earth. Based on their excellent properties, SiNPs are widely used in food production, synthetic processes, medical diagnostics, drug delivery, and other fields. The mass production and wide application of SiNPs increases the risk of human exposure to SiNPs. In the workplace and environment, SiNPs mainly enter the human body through the respiratory tract and reach the lungs; therefore, the lungs are the most important and most toxicologically affected target organ of SiNPs. An increasing number of studies have shown that SiNP exposure can cause severe lung toxicity. However, studies on the toxicity of SiNPs in ex vivo and in vivo settings are still in the exploratory phase. The molecular mechanisms underlying the lung toxicity of SiNPs are varied and not yet fully understood. As a result, this review summarizes the possible mechanisms of SiNP-induced lung toxicity, such as oxidative stress, endoplasmic reticulum stress, mitochondrial damage, and cell death. Moreover, this study provides a summary of the progression of diseases caused by SiNPs, thereby establishing a theoretical basis for future studies on the mechanisms of SiNP-induced lung toxicity.

Exosomes in Glioma: Unraveling Their Roles in Progression, Diagnosis, and Therapy

Gliomas, the most prevalent primary malignant brain tumors, present a challenging prognosis even after undergoing surgery, radiation, and chemotherapy. Exosomes, nano-sized extracellular vesicles secreted by various cells, play a pivotal role in glioma progression and contribute to resistance against chemotherapy and radiotherapy by facilitating the transportation of biological molecules and promoting intercellular communication within the tumor microenvironment. Moreover, exosomes exhibit the remarkable ability to traverse the blood-brain barrier, positioning them as potent carriers for therapeutic delivery. These attributes hold promise for enhancing glioma diagnosis, prognosis, and treatment. Recent years have witnessed significant advancements in exosome research within the realm of tumors. In this article, we primarily focus on elucidating the role of exosomes in glioma development, highlighting the latest breakthroughs in therapeutic and diagnostic approaches, and outlining prospective directions for future research.

Recent progress of nanomedicine in managing dry eye disease

Background

Dry eye disease (DED) is a commonly reported ocular complaint that has garnered significant attention in recent research. The global occurrence of DED ranges from 5% to 50%, impacting a substantial proportion of individuals worldwide with increasing frequency. Although topical administration remains the mainstream drug delivery method for ocular diseases, it suffers from drawbacks such as low bioavailability, rapid drug metabolism, and frequent administration requirements. Fortunately, the advancements in nanomedicine offer effective solutions to address the aforementioned issues and provide significant assistance in the treatment of DED.

Main text

DED is considered a multifactorial disease of the ocular surface and tear film, in which the integrity of tear film function and structure plays a crucial role in maintaining the homeostasis of the ocular surface. The conventional treatment for DED involves the utilization of artificial tear products, cyclosporin, corticosteroids, mucin secretagogues, and nonsteroidal anti-inflammatory drugs. Furthermore, nanomedicine is presently a significant field of study, with numerous clinical trials underway for various nanotherapeutics including nanoemulsions, nanosuspensions, liposomes, and micelles. Notably, some of these innovative nanoformulations have already received FDA approval as novel remedies for DED, and the advancement of nanomedicine is poised to offer enhanced prospects to solve the shortcomings of existing treatments for DED partially.

Conclusions

This article provides an overview of the latest advancements in nanomedicine for DED treatment, while the field of DED treatment is expected to witness a remarkable breakthrough shortly with the development of nanomedicine, bringing promising prospects for patients worldwide suffering conditions.

Reply to Sergent et al. Comment on "Balwierz et al. Potential Carcinogens in Makeup Cosmetics. Int. J. Environ. Res. Public Health 2023, 20, 4780"

Comments by Sergent et al. (2023) [...].

Tumor microenvironment-responsive degradable silica nanoparticles: design principles and precision theranostic applications

Silica nanoparticles have emerged as promising candidates in the field of nanomedicine due to their remarkable versatility and customizable properties. However, concerns about their potential toxicity in healthy tissues and organs have hindered their widespread clinical translation. To address this challenge, significant attention has been directed toward a specific subset of silica nanoparticles, namely degradable silica nanoparticles, primarily because of their excellent biocompatibility and responsive biodegradability. In this review, we provide a comprehensive understanding of degradable silica nanoparticles, categorizing them into two distinct groups: inorganic species-doped and organic moiety-doped silica nanoparticles based on their framework components. Next, the recent progress of tumor microenvironment (TME)-responsive degradable silica nanoparticles for precision theranostic applications is summarized in detail. Finally, current bottlenecks and future opportunities of theranostic nanomedicines based on degradable silica nanoparticles in clinical applications are also outlined and discussed. The aim of this comprehensive review is to shed light on the potential of degradable silica nanoparticles in addressing current challenges in nanomedicine, offering insights into their design, applications in tumor diagnosis and treatment, and paving the way for future advancements in clinical theranostic nanomedicines.

Bioinformatics-driven discovery of silica nanoparticles induces apoptosis and renal damage via the unfolded protein response in NRK-52E cells and rat kidney

Silica nanoparticles (SiNPs) are nanomaterials with widespread applications in drug delivery and disease diagnosis. Despite their utility, SiNPs can cause chronic kidney disease, hindering their clinical translation. The molecular mechanisms underlying SiNP-induced renal toxicity are complex and require further investigation. To address this challenge, we employed bioinformatics tools to predict the potential mechanisms underlying renal damage caused by SiNPs. We identified 1627 upregulated differentially expressed genes (DEGs) and 1334 downregulated DEGs. Functional enrichment analysis and protein-protein interaction network revealed that SiNP-induced renal damage is associated with apoptosis. Subsequently, we verified that SiNPs induced apoptosis in an in vitro model of NRK-52E cells via the unfolded protein response (UPR) in a dose-dependent manner. Furthermore, in an in vivo rat model, high-dose SiNP administration via tracheal drip caused hyalinization of the renal tubules, renal interstitial lymphocytic infiltration, and collagen fiber accumulation. Concurrently, we observed an increase in UPR-related protein levels at the onset of renal damage. Thus, our study confirmed that SiNPs induce apoptosis and renal damage through the UPR, adding to the theoretical understanding of SiNP-related kidney damage and offering a potential target for preventing and treating kidney injuries in SiNP clinical applications.

Application of Nanoparticles for Efficient Delivery of Quercetin in Cancer Cells

Quercetin (Qu, 3,5,7,3', 4'-pentahydroxyflavanone) is a natural polyphenol compound abundantly found in health food or plant-based products. In recent decades, Qu has gained significant attention in the food, cosmetic, and pharmaceutic industries owning to its wide beneficial therapeutic properties such as antioxidant, anti-inflammatory and anticancer activities. Despite the favorable roles of Qu in cancer therapy due to its numerous impacts on the cell signaling axis, its poor chemical stability and bioavailability, low aqueous solubility as well as short biological half-life have limited its clinical application. Recently, drug delivery systems based on nanotechnology have been developed to overcome such limitations and enhance the Qu biodistribution following administration. Several investigations have indicated that the nano-formulation of Qu enjoys more remarkable anticancer effects than its free form. Furthermore, incorporating Qu in various nano-delivery systems improved its sustained release and stability, extended its circulation time, enhanced its accumulation at target sites, and increased its therapeutic efficiency. The purpose of this study was to provide a comprehensive review of the anticancer properties of various Qu nano-formulation to augment their effects on different malignancies. Various targeting strategies for improving Qu delivery, including nanoliposomes, lipids, polymeric, micelle, and inorganic nanoparticle NPs, have been discussed in this review. The results of the current study illustrated that a combination of appropriate nano encapsulation approaches with tumor-oriented targeting delivery might lead to establishing QU nanoparticles that can be a promising technique for cancer treatment.

Adverse effects of cigarette filter silica on lungs: Comparison with natural crystalline silica particles

As a common additive in cigarette filters, nanosilica has been implemented to reduce the release of harmful substances in cigarette smoke. However, the potential risk of occupational exposure for cigarette factory workers is unknown. We collected physical examination data from 710 cigarette factory workers to evaluate the adverse effects of cigarette filter silica exposure. We also established mouse models induced by cigarette filter silica and crystalline silica separately to compare the lung inflammation, pulmonary function, apoptosis, and fibrosis of the two models. Workers in the rolling and packing workshop exposed to cigarette filter silica had a higher rate of abnormal lung function (17.75%) than those in the cutting workshop (0.87%). Animal experiments showed that compared with the same dose of crystalline silica, cigarette filter silica resulted in higher levels of inflammatory factors in the bronchoalveolar lavage fluid (BALF) of mice at day 7, and lower levels of total lung capacity (TLC), inspiratory capacity (IC), vital capacity (VC), and forced vital capacity (FVC) in mice at day 28. Additionally, both exposed groups of mice showed increased levels of caspase 3, collagen I (Col-Ⅰ), α-smooth muscle actin (α-SMA) and hydroxyproline (HYP) in the lungs, as well as collagen accumulation and fibrous nodules at day 28, with no significant difference between the two groups. The results suggested that cigarette filter silica caused more severe early lung inflammation and late ventilation impairment than the same dose of crystalline silica. In the future, we need to pay more attention to nanosilica protection in cigarette factories to prevent pulmonary dysfunction in workers.

Nanoghosts: Harnessing Mesenchymal Stem Cell Membrane for Construction of Drug Delivery Platforms Via Optimized Biomimetics

Mesenchymal stem cells (MSCs) are becoming hotspots for application in disease therapies recently, combining with biomaterials and drug delivery system. A major advantage of MSCs applied in drug delivery system is that these cells enable specific targeting and releasing of cargos to the disease sites. However, the potential tumor tropic effects of MSCs raised concerns on biosafety. To solve this problem, there are emerging methods of isolating cell membranes and developing nanoformulations to perform drug delivery, which avoids concerns on biosafety without disturbing the membrane functions of specific polarizing and locating. These cargoes are so called "nanoghosts." This review article summarizes the current applications of nanoghosts, the promising potential of MSCs to be applied in membrane isolation and nanoghost construction, and possible approaches to develop better drug delivery system harnessing from MSC ghost cell membranes.

Nanotechnology translation in vascular diseases: From design to the bench

Atherosclerosis is a systemic pathophysiological condition contributing to the development of majority of polyvascular diseases. Nanomedicine is a novel and rapidly developing science. Due to their small size, nanoparticles are freely transported in vasculature, and have been widely employed as tools in analytical imaging techniques. Furthermore, the application of nanoparticles also allows target intervention, such as drug delivery and tissue engineering regenerative methods, in the management of major vascular diseases. Therefore, by summarizing the physical and chemical characteristics of common nanoparticles used in diagnosis and treatment of vascular diseases, we discuss the details of these applications from cellular, molecular, and in vivo perspectives in this review. Furthermore, we also summarize the status and challenges of the application of nanoparticles in clinical translation. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Nanoparticle Polymers Influence on Cardiac Health: Good or Bad for Cardiac Physiology?

Cardiovascular diseases (CVD) are one of the leading causes of death and morbidity worldwide. Lifestyle modifications, medications, and addressing epidemiological factors have long been at the forefront of targeting therapeutics for CVD. Treatments can be further complicated given the intersection of gender, age, unique comorbidities, and healthcare access, among many other factors. Therefore, expanding treatment and diagnostic modalities for CVD is absolutely necessary. Nanoparticles and nanomaterials are increasingly being used as therapeutic and diagnostic modalities in various disciplines of biomedicine. Nanoparticles have multiple ways of interacting with the cardiovascular system. Some of them alter cardiac physiology by impacting ion channels, whereas others influence ions directly or indirectly, improving cellular death via decreasing oxidative stress.  While embedding nanoparticles into therapeutics can help enhance healthy cardiovascular function in other scenarios, they can also impair physiology by increasing reactive oxidative species and leading to cardiotoxicity. This review explores different types of nanoparticles, their effects, and the applicable dosages to create a better foundation for understanding the current research findings.

Glycopolymer-grafted nanoparticles as glycosaminoglycan mimics with cell proliferation and anti-tumor metastasis activities

Glycosaminoglycans (GAGs) are naturally existing extracellular components with a variety important biological functions. However, their heterogeneous chemical compositions and the challenges in purification have become the main disadvantages for clinical applications. Thus, various synthetic glycopolymers have been designed to mimic the structures and functions of natural GAGs. In the current study, glycopolymers from structurally simple glucose or N-acetylglucosamine monomers were synthesized, which were further subjected to sulfation of different degrees and grafting onto silica nanoparticles, leading to spherical-shaped nano-structures of uniform diameters. With the successively strengthened multivalent effect, the obtained glycopolymer nanoparticles not only showed excellent effects on promotion of cell proliferation by stabilizing growth factors, but also significantly inhibited tumor metastasis by weakening the adhesion between tumor cells and activated platelets. Among the prepared nanoparticles, S3-PGNAc@Si with N-acetylglucosamine segment and the highest sulfation degree exhibited the strongest bioactivities, which were even close to those of heparin. This work presents a novel approach for structural and functional mimicking of natural GAGs from simple and low-cost monosaccharides, holding great potential for a range of biomedical applications.

Silica nanoparticles induces sperm granuloma formation and blood-epididymal barrier disruption via the p38 MAPK pathway in mice

Previous researches have demonstrated that the silica nanoparticles (SiNPs), which are widely used in all aspects of life, are hazardous to the male reproductive system. However, the cellular and molecular mechanism underlying SiNPs toxicity to the epididymis remain unclear. In this present study, a total of 60 male mice were separated into 4 groups and then treated to SiNPs for 7 consecutive days at a dose of 0, 2.5, 10, and 20 mg/kg body weight. The results showed that SiNPs could alter the histological structure of epididymis and induce sperm granuloma formation, leading to decreased sperm quality and quantity. In addition, the ultrastructure and permeability of blood-epididymal barrier (BEB) were impaired after exposure to SiNPs, and a significant downregulation of integral membrane proteins at the BEB was detected. SiNPs were also found to raise the percentage of macrophages in the epithelium and interstitium of the epididymis, followed by increased expression of pro-inflammatory molecules including TNF α, IL-1β, and IL-6. Meanwhile, SiNPs induced oxidative stress in epididymis, as shown by the markedly elevated generation of reactive oxygen species (ROS) and malondialdehyde (MDA) and upregulated activity of superoxide dismutase (SOD). Further study showed that SiNPs activated the p38 MAPK signaling pathway, which accelerated clathrin-mediated endocytosis of integral membrane proteins and perturb vesicular trafficking. Taken together, exposure to SiNPs could induce sperm granuloma formation and impair the integrity of BEB in mice through activating the p38 MAPK pathway.

Silica-based microencapsulation used in topical dermatologic applications

Microencapsulation has received extensive attention because of its various applications. Since its inception in the 1940s, this technology has been used across several areas, including the chemical, food, and pharmaceutical industries. Over-the-counter skin products often contain ingredients that readily and unevenly degrade upon contact with the skin. Enclosing these substances within a silica shell can enhance their stability and better regulate their delivery onto and into the skin. Silica microencapsulation uses silica as the matrix material into which ingredients can be embedded to form microcapsules. The FDA recognizes amorphous silica as a safe inorganic excipient and recently approved two new topical therapies for the treatment of rosacea and acne. The first approved formulation uses a novel silica-based controlled vehicle delivery technology to improve the stability of two active ingredients that are normally not able to be used in the same formulation due to potential instability and drug degradation. The formulation contains 3.0% benzoyl peroxide (BPO) and 0.1% tretinoin topical cream to treat acne vulgaris in adults and pediatric patients. The second formulation contains silica microencapsulated 5.0% BPO topical cream to treat inflammatory rosacea lesions in adults. Both formulations use the same amorphous silica sol-gel microencapsulation technology to improve formulation stability and skin compatibility parameters.

Prospects and hazards of silica nanoparticles: Biological impacts and implicated mechanisms

With the thrive of nanotechnology, silica nanoparticles (SiNPs) have been extensively adopted in the agriculture, food, cosmetic, and even biomedical industries. Due to the mass production and use, SiNPs inevitably entered the environment, resulting in ecological toxicity and even posing a threat to human health. Although considerable investigations have been conducted to assess the toxicity of SiNPs, the correlation between SiNPs exposure and consequent health risks remains ambiguous. Since the biological impacts of SiNPs can differ from their design and application, the toxicity assessment for SiNPs may be extremely difficult. This review discussed the application of SiNPs in different fields, especially their biomedical use, and documented their potential release pathways into the environment. Meanwhile, the current process of assessing SiNPs-related toxicity on various model organisms and cell lines was also detailed, thus estimating the health threats posed by SiNPs exposure. Finally, the potential toxic mechanisms of SiNPs were also elaborated based on results obtained from both in vivo and in vitro trials. This review generally summarizes the biological effects of SiNPs, which will build up a comprehensive perspective of the application and toxicity of SiNPs.

Development of hyaluronic acid-silica composites via in situ precipitation for improved penetration efficiency in fast-dissolving microneedle systems

Fast-dissolving microneedles (DMNs) hold significant promise for transdermal drug delivery, offering improved patient compliance, biocompatibility, and functional adaptability for various therapeutic purposes. However, the mechanical strength of the biodegradable polymers used in DMNs often proves insufficient for effective penetration into human skin, especially under high humidity conditions. While many composite strategies have been developed to reinforce polymer-based DMNs, simple mixing of the reinforcements with polymers often results in ineffective penetration due to inhomogeneous dispersion of the reinforcements and the formation of undesired micropores. In response to this challenge, this study aimed to enhance the mechanical performance of hyaluronic acid (HA)-based microneedles (MNs), one of the most commonly used DMN systems. We introduced in situ precipitation of silica nanoparticles (Si) into the HA matrix in conjunction with conventional micromolding. The precipitated silica nanoparticles were uniformly distributed, forming an interconnected network within the HA matrix. Experimental results demonstrated that the mechanical properties of the HA-Si composite MNs with up to 20 vol% Si significantly improved, leading to higher penetration efficiency compared to pure HA MNs, while maintaining structural integrity without any critical defects. The composite MNs also showed reduced degradation rates and preserved their drug delivery capabilities and biocompatibility. Thus, the developed HA-Si composite MNs present a promising solution for efficient transdermal drug delivery and address the mechanical limitations inherent in DMN systems. STATEMENT OF SIGNIFICANCE: HA-Si composite dissolving microneedle (DMN) systems were successfully fabricated through in situ precipitation and conventional micromolding processes. The precipitated silica nanoparticles formed an interconnected network within the HA matrix, ranging in size from 25 to 230 nm. The optimal silica content for HA-Si composite MN systems should be up to 20 % by volume to maintain structural integrity and mechanical properties. HA-Si composite MNs with up to 20 % Si showed improved penetration efficiency and reduced degradation rates compared to pure HA MNs, thereby expanding the operational window. The HA-Si composite MNs retained good drug delivery capabilities and biocompatibility.

Biocompatible nanoscale silica particles fabricated from aminopropyltriethoxysilane functionalized brick ash induced versatile pesticidal activity

The present study is aimed to evaluate pesticidal activity and biocompatibility including ecotoxicity of functionalized silica nanoparticles that synthesized by simple, in vitro, green technology principles. Sol-gel method was adopted for the synthesis of silica nanoparticles and was functionalized by Aminopropyltriethoxysilane (APS), characterized and confirmed the uniform, monodispersive, highly stable particles with the size range of 10-200 nm. The synthesized Nano silica was screened against the developmental stages of Spodoptera litura. Pesticidal study revealed that the functionalized nanoparticles were effective against all the life stages of the insect by recording high mortality and the drastic reduction in the larval, pupae, adult emergence, and adult longevity stages. The ecotoxic effect of synthesized nano-silica was tested on soil parameters, growth parameters of Arachis hypogaea, and compatibility with Trichoderma viride. This study revealed there was no toxic effect on soil, growth parameters of Arachis hypogaea, and most significantly the growth of Trichoderma viride was not inhibited. A biocompatibility study was done by using Zebrafish and Rabbit model. The study divulges there was no toxic effect on all the developmental stages of the Embryo. Further, the nanoparticles did not exhibit any dermatotoxicological effect which confirmed no signs and symptoms of inflammation. Nano-silica emerges as a promising eco-friendly and non-toxic substitute for conventional insecticides. Its utilization has the potential to augment both environmental preservation and economic prosperity on a national scale. Furthermore, the integration of silica-based nanoparticles with biocidal agents demonstrates notable biocompatibility and the capacity to hinder bacterial adhesion.

Ultra-Small Air-Stable Triplet-Triplet Annihilation Upconversion Nanoparticles for Anti-Stokes Time-Resolved Imaging

Image contrast is often limited by background autofluorescence in steady-state bioimaging microscopy. Upconversion bioimaging can overcome this by shifting the emission lifetime and wavelength beyond the autofluorescence window. Here we demonstrate the first example of triplet-triplet annihilation upconversion (TTA-UC) based lifetime imaging microscopy. A new class of ultra-small nanoparticle (NP) probes based on TTA-UC chromophores encapsulated in an organic-inorganic host has been synthesised. The NPs exhibit bright UC emission (400-500 nm) in aerated aqueous media with a UC lifetime of ≈1 μs, excellent colloidal stability and little cytotoxicity. Proof-of-concept demonstration of TTA-UC lifetime imaging using these NPs shows that the long-lived anti-Stokes emission is easily discriminable from typical autofluorescence. Moreover, fluctuations in the UC lifetime can be used to map local oxygen diffusion across the subcellular structure. Our TTA-UC NPs are highly promising stains for lifetime imaging microscopy, affording excellent image contrast and potential for oxygen mapping that is ripe for further exploitation.

Dual pH- and temperature-responsive poly(dimethylaminoethyl methacrylate)-coated mesoporous silica nanoparticles as a smart drug delivery system

A robust drug delivery system was created by grafting poly(dimethylaminoethyl methacrylate) (PDMAEMA) onto silica nanoparticles with two different lengths using an in situ atom transfer radical polymerization, resulting in the formation of a pH- and temperature-sensitive shell. The high molecular weight PDMAEMA demonstrated effective controlled drug release, and prevented drug release in healthy cells. Drug release occurred through polymer shell protonation at pH 5. The critical temperature of 41 °C facilitated rapid solvation of the shell polymers in the blood, preventing tissue accumulation and reducing toxicity compared to systems with lower critical solution temperatures. Field-emission scanning electron microscopy analysis and nitrogen adsorption/desorption analysis showed that the nanoparticles have a fine network, mesoporous structure, and a mean size of around 17 nm that show their excellent capacity for loading drugs. Fourier-transform infrared spectroscopy showed that all the modification steps and polymerization were successfully implemented. Thermogravimetric analysis showed PDMAEMA chains with two different lengths grafted onto the nanoparticles. Transmission electron microscopy analysis also showed grafted polymer chains on the hybrid nanoparticles. The release profile of model cancer drugs (doxorubicin and methotrexate) varied with pH and temperature, with high molecular weight PDMAEMA shells effectively preventing drug release at neutral pH. In vitro analysis using the HeLa cell line showed minimal toxicity in blank samples and significant release profile in acidic environment.

Real-Time Optical Tracking of Protein Corona Formation on Single Nanoparticles in Serum

The formation of a protein corona, where proteins spontaneously adhere to the surface of nanomaterials in biological environments, leads to changes in their physicochemical properties and subsequently affects their intended biomedical functionalities. Most current methods to study protein corona formation are ensemble-averaging and either require fluorescent labeling, washing steps, or are only applicable to specific types of particles. Here we introduce real-time all-optical nanoparticle analysis by scattering microscopy (RONAS) to track the formation of protein corona in full serum, at the single-particle level, without any labeling. RONAS uses optical scattering microscopy and enables real-time and in situ tracking of protein adsorption on metallic and dielectric nanoparticles with different geometries directly in blood serum. We analyzed the adsorbed protein mass, the affinity, and the kinetics of the protein adsorption at the single particle level. While there is a high degree of heterogeneity from particle to particle, the predominant factor in protein adsorption is surface chemistry rather than the underlying nanoparticle material or size. RONAS offers an in-depth understanding of the mechanisms related to protein coronas and, thus, enables the development of strategies to engineer efficient bionanomaterials.

Microbial synthesis of titanium dioxide nanoparticles and their importance in wastewater treatment and antimicrobial activities: a review

Nanotechnology (NT) and nanoparticles (NPs) have left a huge impact on every field of science today, but they have shown tremendous importance in the fields of cosmetics and environmental cleanup. NPs with photocatalytic effects have shown positive responses in wastewater treatment, cosmetics, and the biomedical field. The chemically synthesized TiO2 nanoparticles (TiO2 NPs) utilize hazardous chemicals to obtain the desired-shaped TiO2. So, microbial-based synthesis of TiO2 NPs has gained popularity due to its eco-friendly nature, biocompatibility, etc. Being NPs, TiO2 NPs have a high surface area-to-volume ratio in addition to their photocatalytic degradation nature. In the present review, the authors have emphasized the microbial (algae, bacterial, fungi, and virus-mediated) synthesis of TiO2 NPs. Furthermore, authors have exhibited the importance of TiO2 NPs in the food sector, automobile, aerospace, medical, and environmental cleanup.

Analysis of complementarities between nanomedicine and phytodrugs for the treatment of malarial infection

The use of nanocarriers in medicine, so-called nanomedicine, is one of the most innovative strategies for targeting drugs at the action site and increasing their activity index and effectiveness. Phytomedicine is the oldest traditional method used to treat human diseases and solve health problems. The recent literature on the treatment of malaria infections using nanodelivery systems and phytodrugs or supplements has been analyzed. For the first time, in the present review, a careful look at the considerable potential of nanomedicine in promoting phytotherapeutic efficacy was done, and its key role in addressing a translation through a significant reduction of the current burden of malaria in many parts of the world has been underlined.

Overcoming the yield challenge of mussel foot proteins: Enhancing adhesion through metal ion-incorporated nanoparticles

Mussel foot proteins (MFPs) hold tremendous potential for various fields, but their low natural production yield presents a significant challenge for practical use. This study aims to explore possible solutions to overcome this limitation. While advanced recombinant technology can improve production efficiency, the resulting proteins lack the crucial chemical signature of mussel adhesion, 3,4-Dihydroxyphenylalanine (DOPA). Recent studies have shown that adhesives in nanoparticle form offer higher adhesion on solid surfaces, making them a promising alternative. Moreover, metal ions can enhance the cohesive forces between MFPs, leading to improved adhesion. In this study, we prepared MFP nanoparticles via spray-drying and tested their adhesion performance on surfaces with varying hydrophobicity using a universal testing machine. Our findings confirmed that MFP nanoparticles exhibit stronger adhesive performance than native MFPs, with metal ions contributing to even more robust adhesion. This study offers valuable insights into the adhesive behavior of MFPs in nanoparticle form with metal ions, presenting a potential solution to the challenge of low natural production yield of MFPs and the possibility of enhancing their adhesion properties in bio-adhesive materials.

Sugarcane ash and sugarcane ash-derived silica nanoparticles alter cellular metabolism in human proximal tubular kidney cells

Multiple epidemics of chronic kidney disease of an unknown etiology (CKDu) have emerged in agricultural communities around the world. Many factors have been posited as potential contributors, but a primary cause has yet to be identified and the disease is considered likely multifactorial. Sugarcane workers are largely impacted by disease leading to the hypothesis that exposure to sugarcane ash produced during the burning and harvest of sugarcane could contribute to CKDu. Estimated exposure levels of particles under 10 μm (PM10) have been found to be exceptionally high during this process, exceeding 100 μg/m3 during sugarcane cutting and averaging ∼1800 μg/m3 during pre-harvest burns. Sugarcane stalks consist of ∼80% amorphous silica and generate nano-sized silica particles (∼200 nm) following burning. A human proximal convoluted tubule (PCT) cell line was subjected to treatments ranging in concentration from 0.025 μg/mL to 25 μg/mL of sugarcane ash, desilicated sugarcane ash, sugarcane ash-derived silica nanoparticles (SAD SiNPs) or manufactured pristine 200 nm silica nanoparticles. The combination of heat stress and sugarcane ash exposure on PCT cell responses was also assessed. Following 6-48 h of exposure, mitochondrial activity and viability were found to be significantly reduced when exposed to SAD SiNPs at concentrations 2.5 μg/mL or higher. Oxygen consumption rate (OCR) and pH changes suggested significant alteration to cellular metabolism across treatments as early as 6 h following exposure. SAD SiNPs were found to inhibit mitochondrial function, reduce ATP generation, increase reliance on glycolysis, and reduce glycolytic reserve. Metabolomic analysis revealed several cellular energetics pathways (e.g., fatty acid metabolism, glycolysis, and TCA cycle) are significantly altered across ash-based treatments. Heat stress did not influence these responses. Such changes indicate that exposure to sugarcane ash and its derivatives can promote mitochondrial dysfunction and disrupt metabolic activity of human PCT cells.

Nanosilica size-dependent toxicity in Ceriodaphnia reticulata (Cladocera)

Silica nanoparticles (SiNP) are the most produced nanomaterials due to their variety of applications. When released to environments, surface water bodies are their main final sink. SiNP toxicity is still inconclusive and may vary according to particle properties such as their size. We analyzed the size-related effects of SiNP (22 and 244 nm) on mortality, life history traits, and oxidative stress in the cladoceran Ceriodaphnia reticulata. The smaller SiNP (LC5072 h: 105.5 µg/ml) were more lethal than the larger ones (LC5072 h >500 µg/ml). The 22 nm-sized SiNP decreased the number of molts and neonates, increased superoxide dismutase and inhibited glutathione S-transferase activities, while larger SiNP did not exert substantial effects on the organisms at the tested concentrations. In conclusion, SiNP toxicity depended on their size, and this information should be considered for regulatory purposes and to the development of safe-by-design nanoproducts to ultimately guarantee the environment protection.

Hippophae rhamnoides L. (sea buckthorn) mediated green synthesis of copper nanoparticles and their application in anticancer activity

Green synthesis of nanoparticles has drawn huge attention in the last decade due to their eco-friendly, biocompatible nature. Phyto-assisted synthesis of metallic nanoparticles is widespread in the field of nanomedicine, especially for antimicrobial and anticancer activity. Here in the present research work, investigators have used the stem extract of the Himalayan plant Hippophae rhamnoides L, for the synthesis of copper nanoparticles (CuNPs). The synthesized of CuNPs were analyzed by using sophisticated instruments, i.e., Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy, X-ray diffraction (XRD), high-performance liquid chromatography (HPLC), and scanning electron microscope (SEM). The size of the synthesized CuNPs was varying from 38 nm to 94 nm which were mainly spherical in shape. Further, the potential of the synthesized CuNPs was evaluated as an anticancer agent on the Hela cell lines, by performing an MTT assay. In the MTT assay, a concentration-dependent activity of CuNPs demonstrated the lower cell viability at 100 μg/mL and IC50 value at 48 μg/mL of HeLa cancer cell lines. In addition to this, apoptosis activity was evaluated by reactive oxygen species (ROS), DAPI (4',6-diamidino-2-phenylindole) staining, Annexin V, and Propidium iodide (PI) staining, wherein the maximum ROS production was at a dose of 100 µg per mL of CuNPs with a higher intensity of green fluorescence. In both DAPI and PI staining, maximum nuclear condensation was observed with 100 μg/mL of CuNPs against HeLa cell lines.

Recent Advances on Porous Siliceous Materials Derived from Waste

In recent years, significant efforts have been made in view of a transition from a linear to a circular economy, where the value of products, materials, resources, and waste is maintained as long as possible in the economy. The re-utilization of industrial and agricultural waste into value-added products, such as nanostructured siliceous materials, has become a challenging topic as an effective strategy in waste management and a sustainable model aimed to limit the use of landfill, conserve natural resources, and reduce the use of harmful substances. In light of these considerations, nanoporous silica has attracted attention in various applications owing to the tunable pore dimensions, high specific surface areas, tailorable structure, and facile post-functionalization. In this review, recent progress on the synthesis of siliceous materials from different types of waste is presented, analyzing the factors influencing the size and morphology of the final product, alongside different synthetic methods used to impart specific porosity. Applications in the fields of wastewater/gas treatment and catalysis are discussed, focusing on process feasibility in large-scale productions.

Synthetic nanoparticles for the delivery of CRISPR/Cas9 gene editing system: classification and biomedical applications

Gene editing has great potential in biomedical research including disease diagnosis and treatment. Clustered regularly interspaced short palindromic repeats (CRISPR) is the most straightforward and cost-effective method. The efficient and precise delivery of CRISPR can impact the specificity and efficacy of gene editing. In recent years, synthetic nanoparticles have been discovered as effective CRISPR/Cas9 delivery vehicles. We categorized synthetic nanoparticles for CRISPR/Cas9 delivery and discribed their advantages and disadvantages. Further, the building blocks of different kinds of nanoparticles and their applications in cells/tissues, cancer and other diseases were described in detail. Finally, the challenges encountered in the clinical application of CRISPR/Cas9 delivery materials were discussed, and potential solutions were provided regarding efficiency and biosafety issues.

Advances in mRNA therapeutics for cancer immunotherapy: From modification to delivery

RNA vaccines have demonstrated their ability to solve the issues posed by the COVID-19 pandemic. This success has led to the renaissance of research into mRNA and their nanoformulations as potential therapeutic modalities for various diseases. The potential of mRNA as a template for synthesizing proteins and protein fragments for cancer immunotherapy is now being explored. Despite the promise, the use of mRNA in cancer immunotherapy is limited by challenges, such as low stability against extracellular RNases, poor delivery efficiency to the target organs and cells, short circulatory half-life, variable expression levels and duration. This review highlights recent advances in chemical modification and advanced delivery systems that are helping to address these challenges and unlock the biological and pharmacological potential of mRNA therapeutics in cancer immunotherapy. The review concludes by discussing future perspectives for mRNA-based cancer immunotherapy, which holds great promise as a next-generation therapeutic modality.

The Functions of Cholera Toxin Subunit B as a Modulator of Silica Nanoparticle Endocytosis

The gastrointestinal tract is the main target of orally ingested nanoparticles (NPs) and at the same time is exposed to noxious substances, such as bacterial components. We investigated the interaction of 59 nm silica (SiO2) NPs with differentiated Caco-2 intestinal epithelial cells in the presence of cholera toxin subunit B (CTxB) and compared the effects to J774A.1 macrophages. CTxB can affect cellular functions and modulate endocytosis via binding to the monosialoganglioside (GM1) receptor, expressed on both cell lines. After stimulating macrophages with CTxB, we observed notable changes in the membrane structure but not in Caco-2 cells, and no secretion of the pro-inflammatory cytokine tumor necrosis factor-α (TNF-α) was detected. Cells were then exposed to 59 nm SiO2 NPs and CtxB sequentially and simultaneously, resulting in a high NP uptake in J774A.1 cells, but no uptake in Caco-2 cells was detected. Flow cytometry analysis revealed that the exposure of J774A.1 cells to CTxB resulted in a significant reduction in the uptake of SiO2 NPs. In contrast, the uptake of NPs by highly selective Caco-2 cells remained unaffected following CTxB exposure. Based on colocalization studies, CTxB and NPs might enter cells via shared endocytic pathways, followed by their sorting into different intracellular compartments. Our findings provide new insights into CTxB's function of modulating SiO2 NP uptake in phagocytic but not in differentiated intestine cells.

A novel biosensor based on a bio-barcode for the detection of Mycobacterium tuberculosis

Tuberculosis (TB), the second (after COVID-19) deadliest infectious killer, is a chronic infectious disease caused by infection with Mycobacterium tuberculosis (M.T.), where early diagnosis and management are the key to containing the condition. Here, we report a novel biosensor for the detection of M.T. DNA based on magnetic separation, urease catalysis and silicon nanowire field effect transistor (SiNW FET) detection. M.T. DNA is sequence-specifically captured by magnetic nanoparticles and urease-labelled silica nanoparticles simultaneously to form a sandwich complex and urea is catalyzed into ammonium carbonate by urease modified on a sandwich complex. By using SiNW FET, the detection of M.T. DNA is realized indirectly by the detection of ammonium carbonate. The limit of detection (LOD) was determined to be 78.541 fM. The specificity of the biosensor was confirmed by detecting a panel of bacterial species. The utility of the biosensor was demonstrated in real-sample analysis and the recovery study of M.T. DNA was done in the genomic DNA extracted from cultured Mycobacterium tuberculosis. The biosensor holds promise to become a rapid, sensitive and accurate method for clinical diagnosis.

Engineering Antioxidant Surfaces for Titanium-Based Metallic Biomaterials

Prolonged inflammation induced by orthopedic metallic implants can critically affect the success rates, which can even lead to aseptic loosening and consequent implant failure. In the case of adverse clinical conditions involving osteoporosis, orthopedic trauma and implant corrosion-wear in peri-implant region, the reactive oxygen species (ROS) activity is enhanced which leads to increased oxidative stress. Metallic implant materials (such as titanium and its alloys) can induce increased amount of ROS, thereby critically influencing the healing process. This will consequently affect the bone remodeling process and increase healing time. The current review explores the ROS generation aspects associated with Ti-based metallic biomaterials and the various surface modification strategies developed specifically to improve antioxidant aspects of Ti surfaces. The initial part of this review explores the ROS generation associated with Ti implant materials and the associated ROS metabolism resulting in the formation of superoxide anion, hydroxyl radical and hydrogen peroxide radicals. This is followed by a comprehensive overview of various organic and inorganic coatings/materials for effective antioxidant surfaces and outlook in this research direction. Overall, this review highlights the critical need to consider the aspects of ROS generation as well as oxidative stress while designing an implant material and its effective surface engineering.

Microbial Polysaccharide-Based Formulation with Silica Nanoparticles; A New Hydrogel Nanocomposite for 3D Printing

Natural polysaccharides are highly attractive biopolymers recommended for medical applications due to their low cytotoxicity and hydrophilicity. Polysaccharides and their derivatives are also suitable for additive manufacturing, a process in which various customized geometries of 3D structures/scaffolds can be achieved. Polysaccharide-based hydrogel materials are widely used in 3D hydrogel printing of tissue substitutes. In this context, our goal was to obtain printable hydrogel nanocomposites by adding silica nanoparticles to a microbial polysaccharide's polymer network. Several amounts of silica nanoparticles were added to the biopolymer, and their effects on the morpho-structural characteristics of the resulting nanocomposite hydrogel inks and subsequent 3D printed constructs were studied. FTIR, TGA, and microscopy analysis were used to investigate the resulting crosslinked structures. Assessment of the swelling characteristics and mechanical stability of the nanocomposite materials in a wet state was also conducted. The salecan-based hydrogels displayed excellent biocompatibility and could be employed for biomedical purposes, according to the results of the MTT, LDH, and Live/Dead tests. The innovative, crosslinked, nanocomposite materials are recommended for use in regenerative medicine.

Evaluation of the cellular effects of silica particles used for dermal application

The cellular effects of 5 types of spherical amorphous silica particles whose particle size were 4.2-12.8 μm for cosmetic use and two types of crystalline silica whose particle size were 2.4 and 7.1 μm particles for industrial use were examined. These silica particles were applied to HaCaT human keratinocytes for 24 hr. Crystalline silica enhanced IL-8 and IL-6 expression and caused cell membrane damage. Crystalline silica also enhanced HO-1 gene expression; however, the level of intracellular ROS did not change. Compared with crystalline silica, the cellular effects of the spherical silica employed in this study were minor. Cellular uptake of particles was observed for all of silica particle types. Cellular uptake of crystalline silica was observed 1 hr after exposure, and internalized silica particles were present in the cytoplasm. When HaCaT cells were exposed to crystalline silica for 1 hr and incubated for 23 hr in culture medium without silica particles, IL-8 expression was still detected. In addition, silica particles exerted negligible effects using a 3D skin tissue model. Thus, the following conclusions may be drawn. (1) cellular effects exerted by spherical silica are less compared to crystalline silica. (2) phagocytosis of particles is an important first step in the cellular effects of silica particles. (3) spherical silica particles might exert little, if any, effect on healthy skin attributed to no apparent cellular uptake.

The effects of short-term dietary exposure to SiO2 nanoparticle on the domesticated lepidopteran insect model silkworm (Bombyx mori): Evidence from the perspective of multi-omics

Silicon dioxide nanoparticles (nSiO₂) are one of the widely utilized nanoparticle (NPSs) materials, and exposure to nSiO₂ is ubiquitous. With the increasing commercialization of nSiO₂, the potential risk of nSiO₂ release to the health and the ecological environment have been attracted more attention. In this study, the domesticated lepidopteran insect model silkworm (Bombyx mori) was utilized to evaluate the biological effects of dietary exposure to nSiO₂. Histological investigations showed that nSiO₂ exposure resulted in midgut tissue injury in a dose-dependent manner. Larval body mass and cocoon production were reduced by nSiO₂ exposure. ROS burst was not triggered, and the activities of antioxidant enzymes were induced in the midgut of silkworm exposure to nSiO₂. RNA-sequencing revealed that the differentially expressed genes induced by nSiO₂ exposure were predominantly enriched into xenobiotics biodegradation and metabolism, lipid, and amino acid metabolism pathways. 16 S rDNA sequencing revealed that nSiO₂ exposure altered the microbial diversity in the gut of the silkworm. Metabolomics analysis showed that the combined uni- and multivariate analysis identified 28 significant differential metabolites from the OPLS-DA model. These significant differential metabolites were predominantly enriched into the metabolic pathways, including purine metabolism and tyrosine metabolism and so. Spearman correlation analysis and the Sankey diagram established the relationship between microbe and metabolites, and some genera may play crucial and pleiotropic functions in the interaction between microbiome and host. These findings indicated that nSiO₂ exposure could impact the dysregulation of genes related to xenobiotics metabolism, gut dysbiosis, and metabolic pathways and provided a valuable reference for assessing nSiO₂ toxicity from a multi-dimensional perspective.

EDTA-functionalized silica nanoparticles as a conditioning agent for dentin bonding using etch-and-rinse technique

OBJECTIVE

This study investigated the possibility of using ethylenediaminetetraacetic acid functionalized silica nanoparticles (EDTA-SiO₂) as a dentin-conditioning agent using etch-and-rinse technique to promote the durability of dentin bonding.

METHODS

The SiO₂-EDTA were synthesized by N- [(3- trimethoxysilyl) propyl] ethylenediamine triacetic acid (EDTA-TMS) and SiO₂ (50 nm), then characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The capacity of SiO₂-EDTA to chelate calcium ions from dentin was examined by inductively coupled plasma-optic emission spectrometry (ICP-OES). The dentin surfaces conditioned with SiO₂-EDTA were detected by field emission scanning electron microscopy (SEM), TEM and microhardness testing. For dentin bonding, dentin surfaces were adopted wet- or dry-bonding technique and bonded with adhesive (Adper^TM Single Bond2) and applied composite resin (Filtek Z350) on them. The durability of dentin bonding was evaluated by mircotensile bond strength test, in-situ zymography and nanoleakage testing.

RESULTS

FTIR, TGA and XPS results showed that SiO₂-EDTA contained N element and carboxyl groups. SEM, TEM and microhardness results indicated that SiO₂-EDTA group created extrafibrillar demineralization and retained more intrafibrillar minerals within dentin surface. In the dentin bonding experiment, SiO₂-EDTA group achieved acceptable bond strength, and reduced the activity of matrix metalloproteinase and nanoleakage along bonding interface.

CONCLUSION

It was possible to generate a feasible dentin conditioning agent (SiO₂-EDTA), which could create dentin extrafibrillar demineralization and improve dentin bond durability.

CLINICAL SIGNIFICANCE

This study introduces a new dentin conditioning scheme based on SiO₂-EDTA to create extrafibrillar demineralization for dentin bonding. This strategy has the potential to be used in clinic to promote the life of restoration bonding.