Synthesis of zero-valent copper-chitosan nanocomposites and their application for treatment of hexavalent chromium

Sequential removal of phosphate and copper(II) ions using sustainable chitosan biosorbent

Although adsorbents are good candidates for removing phosphorus and heavy metals from wastewater, the use of biosorbents for the sequential treatment of phosphorus and copper has not yet been studied. Porous chitosan (CS)-based biosorbents (CGBs) were developed to adsorb phytic acid (PA), a major form of organic phosphate. This first adsorbate (PA) further served as an additional ligand (P-type ligand) for the CGBs (N-type ligand) to form a complex with the second adsorbate (copper). After the adsorption of PA (the first adsorbate), the spent CGBs were recycled and used as a new adsorbent to adsorb Cu(II) ions (the second adsorbate), which was expected to have a dual coordination effect through P, N-ligand complexation with copper. The interactions and complexation between CS, PA and Cu(II) ions on the PA-adsorbed CGBs (PACGBs) were investigated by performing FTIR, XPS, XRD, and SEM-EDS analyses. The PACGBs exhibited fast and enhanced adsorption of Cu(II) ions, owing to the synergistic effect of the amino groups of CS (the original ligand, N-type) and the phosphate groups of PA (an additional ligand, P-type) on the adsorption of Cu(II) ions. This is the first time that sequential removal of phosphorus and heavy metals by biosorbents has been performed using biosorbents.

Qualitative and Quantitative Investigation of Biochar-Cu0 Composite for Nickel Adsorption

The current investigation deals with the treatment of water pollution that is caused by the leaching of nickel ions from the metallurgical industry and new-energy batteries. Therefore, an eco-friendly treatment of nickel through the use of a composite of cotton stalk biochar with nanozerovalent copper has been presented in this investigation signifying the impact of zerovalent copper in enhancing the adsorption capacity of biochar for nickel adsorption. Thermogravimetric analysis data showed the adsorbent to be significantly stable in the higher thermal range, whereas transmission electron microscopy analysis confirmed the particles to be 27 nm and also showed the cubic geometry of the particles. A much closer scanning electron microscopy analysis shows the morphology of particles to be cubic in shape. Batch adsorption indicated a positive influence of pH increase on adsorption due to the electrostatic attraction between positive nickel ions and post point of zero charge (pHPZC) negative surface of copper biochar composite (pH > 5.5). A high adsorption rate was observed in the first 60 min, whereas adsorption increased with the increase in temperature from 303 to 318 K. Kinetic modeling confirmed the pseudo-first-order to fit best to the data. The apparent activation energy (11.96 kJ mol-1) is indicative of the chemical nature of the process. The adsorption data fitted well to the Langmuir adsorption model. The negative values of apparent ΔG° and the positive values of apparent ΔH° indicate the spontaneity and endothermicity of the process, respectively, whereas the positive values of apparent ΔS° point toward increased randomness during the process. Postadsorption XPS suggests the adsorption of nickel on the surface of biochar composites in the form of Ni(OH)2 and NiO(OH).

Synergistically adsorbing and reducing Uranium from water by a novel nano zero-valent copper/MXene 0D/2D nanocomposite

Proper disposal of uranium-containing waste is of utmost importance for safeguarding the environment and human health. In this study, we proposed a novel zero-dimensional (0D)/two-dimensional (2D) nanocomposite material, nZVC/Ti3C2, composed of nano zero-valent copper (nZVC) nanoparticles loaded onto Ti3C2 MXene nanoflakes, which was prepared using a simple in situ chemical reduction method. The uniform dispersion of 0D nZVC nanoparticles, with a size of approximately 5 nm, onto the 2D ultrathin Ti3C2 MXene effectively prevented agglomeration and corrosion of nZVC. This unique configuration provided numerous adsorption sites for UO22+and facilitated a fascinating charge channel for reducing adsorbed UO22+ into low-mobilized UO2 by nZVC. Under the synergistic effect of Ti3C2 MXene and nZVC, remarkable efficiency and selectivity of nZVC/Ti3C2 for U (VI) removal were demonstrated, which exhibited an exceptional adsorption capacity of up to 360 mg/g, coupled with a high removal efficiency of 97.5 % and rapid kinetics. Importantly, the presence of humic acid did not significantly affect the U (VI) removal efficiency of the composite because of the reduction effect of nZVC. The underlying mechanism of U (VI) removal was elucidated, revealing the involvement of reductive immobilization in the form of UO2 (as high as 73.6 %), inner-sphere surface complexation, and hydrolytic precipitation. This mechanism was dependent on the availability of active nZVC and the solution's pH. These findings highlight the potential of nZVC/Ti3C2 composites as efficient decontaminants for radioactive wastewater, thus contributing to advancements in environmental remediation endeavors.

Efficient Removal of Nitrate in Neutral Solution Using Zero-Valent Al Activated by Soaking

Nitrate is a contaminant widely found in surface water, and a high concentration of nitrate can pose a serious threat to human health. Zero-valent iron is widely used to reduce nitrate in aqueous solution, but an acidic condition is required. Zero-valent aluminum has a much lower redox potential (E₀(Al³⁺/Al⁰) = -1.662 V) than zero-valent iron (E₀(Fe²⁺/Fe⁰) = -0.44 V), making it a better choice for reduction of nitrate. However, a passive oxide film covering on Al surfaces inhibits its electron transfer. In this work, metal Al powder was activated by a soaking procedure in deionized water. It was found that nitrate in neutral solution can be efficiently and completely reduced by soaked Al, even if the concentration of nitrate-N was up to 100 mg L^-1. Using an optimal soaking time, the soaked Al can remove >90% of nitrate in aqueous solution within ∼2 h at 50 °C. Furthermore, the nitrate reduction efficiency increased with increasing reaction temperature and dosage of Al powder. After reaction, only ∼50% of pristine N content was left in the form of ammonia ions (NH₄⁺) in aqueous solution. Mechanism analyses showed that after soaking, Al particle surfaces were covered by a layer of loose and fine Al(OH)₃ grains, which can shorten the induction time for the beginning of the reaction between inner Al and outside ions or molecules. This is the reason why soaked Al has a high efficiency for nitrate removal. The present results indicate that soaking is an effective way to activate Al to remove nitrate in water.

A review of novel green adsorbents as a sustainable alternative for the remediation of chromium (VI) from water environments

The presence of heavy metal, chromium (VI), in water environments leads to various diseases in humans, such as cancer, lung tumors, and allergies. This review comparatively examines the use of several adsorbents, such as biosorbents, activated carbon, nanocomposites, and polyaniline (PANI), in terms of the operational parameters (initial chromium (VI) concentration (C_o), temperature (T), pH, contact time (t), and adsorbent dosage) to achieve the Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption. The study finds that the use of biosorbents (fruit bio-composite, fungus, leave, and oak bark char), activated carbons (HCl-treated dry fruit waste, polyethyleneimine (PEI) and potassium hydroxide (KOH) PEI-KOH alkali-treated rice waste-derived biochar, and KOH/hydrochloric acid (HCl) acid/base-treated commercial), iron-based nanocomposites, magnetic manganese-multiwalled carbon nanotubes nanocomposites, copper-based nanocomposites, graphene oxide functionalized amino acid, and PANI functionalized transition metal are effective in achieving high Langmuir's maximum adsorption capacity (q_m) for chromium (VI) adsorption, and that operational parameters such as initial concentration, temperature, pH, contact time, and adsorbent dosage significantly affect the Langmuir's maximum adsorption capacity (q_m). Magnetic graphene oxide functionalized amino acid showed the highest experimental and pseudo-second-order kinetic model equilibrium adsorption capacities. The iron oxide functionalized calcium carbonate (IO@CaCO₃) nanocomposites showed the highest heterogeneous adsorption capacity. Additionally, Syzygium cumini bark biosorbent is highly effective in treating tannery industrial wastewater with high levels of chromium (VI).

A review on current progress of graphene-based ternary nanocomposites in the removal of anionic and cationic inorganic pollutants

The current review aims to summarize the ongoing advances in high-performing graphene-based ternary nanocomposites for removing cationic and anionic inorganic pollutants. Graphene derivatives are extensively utilized for the development of composites due to their high synergism with co-functional materials, rational design, flexible surface chemistry, high mobile charge carriers, improved binding properties, and many more. The past ten years have witnessed progressive research on graphene-based ternary nanocomposites in a multitude of pollution remediation applications. Therefore, the focus falls on understanding how these ternary nanocomposites are tailored to capture the inorganic cationic and anionic contaminants with particular emphasis on graphene derivatives as base matrix and filler. The review investigates the synthesis, categorization, and characterization techniques of graphene-based ternary composites. Besides, the study broadens the understanding of the binding mechanism of the pollutants onto graphene ternary composites. The review also assesses the separation and recycling efficacy of the composites in detail. The future prospects in improving the practical application of the ternary systems also have been discussed. The comprehensive review on graphene based ternary systems detailing their structural and functional aspects, as well as their performance as inorganic decontaminants can provide deep insights for researchers in improvising wastewater treatment technologies.

Evaluation of diethylenetriaminepentaacetic acid modified chitosan immobilized in amino-carbmated alginate matrix as a low cost adsorbent for effective Cu(II) recovery

In present work, facile synthesis of a biocompatible hybrid biosorbent based on diethylenetriaminepentaacetic acid (DTPA) modified chitosan immobilized in organo-functionalized sodium alginate matrix (DTPA-MCSA) was carried out. DTPA-MCSA was casted in microspherical hydrogel beads. Three dimensional microporous geometry of the biosorbent remained well preserved as observed in SEM analysis which revealed the improved mechanical strength of the alginate matrix. Surface functionalization of base biopolymers was confirmed by FTIR and SEM analysis. Equilibrium sorption studies using DTPA-MCSA for Cu(II) from aqueous medium were carried out in batch mode and found considerably dependent on pH, contact sorption time, temperature and initial copper concentration. Isothermal sorption data showed close correlation with Langmuir model as evident from nonlinear fitting of data (R 2 ˜ 0.99) at different temperatures. The experimental sorption capacity (q e) was found nearly 67 mg/g using 100 mg/L initial concentration of copper ions. Kinetic studies were conducted using different initial concentrations for better elucidation of results and it showed better correlation with pseudo second order rate equation which unveiled that strong ion pair coordination and complexation exist between Cu(II) and newly grafted chelating sites of DTPA-MCSA. Thermodynamic parameters suggested that the adsorption process is spontaneous and endothermic. The results concluded that DTPA-MCSA could be a better candidate for adsorptive remediation of copper ions from liquid waste.

Nanoscale zerovalent copper (nZVC) catalyzed environmental remediation of organic and inorganic contaminants: A review

Over the past decade, the nano zerovalent copper has emerged as an effective nano-catalyst for the environment remediation processes due to its ease of synthesis, low cost, controllable particle size and high reactivity despite its release during the remediation process and related concentration dependent toxicities. However, the improvised techniques involving the use of supports or immobilizer for the synthesis of Cu⁰ has significantly increased its stability and motivated the researchers to explore the applicability of Cu⁰ for the environment remediation processes, which is evident from access to numerous reports on nano zerovalent copper mediated remediation of contaminants. Initially, this review allows the understanding of the various resources used to synthesize zerovalent copper nanomaterial and the structure of Cu⁰ nanoparticles, followed by focus on the reaction mechanism and the species involved in the contaminant remediation process. The studies comprehensively presented the application of nano zerovalent copper for remediation of organic/inorganic contaminants in combination with various oxidizing and reducing agents under oxic and anoxic conditions. Further, it was evaluated that the immobilizers or support combined with various irradiation sources originates a synergistic effect and have a significant effect on the stability and the redox properties of nZVC in the remediation process. Therefore, the review proposed that the future scope of research should include rigorous focus on deriving an exact mechanism for synergistic effect for the removal of contaminants by supported nZVC.

Environmental remediation using metals and inorganic and organic materials: a review

In recent times, environmental pollution has been an alarming concern. This is increasing day-in-and-day-out, especially in the Asia-Pacific region due to the increasing population, urbanization, industrialization and inappropriate waste management measures. Pollution abatement is the need of the hour to sustain the biosphere in general and the human life in particular. A range of physical, chemical and biological strategies are commonly employed to remove pollutants from the contained water, soil and air. Physical, chemical or physicochemical remediation processes are commonly employed owing to their high efficiency, stability, recyclable property and low procurement cost as compared to metals, inorganic and organic materials. Materials of the later type include biocomposites, thin films, modified (bio)polymers, nanoparticles, nanofilters, sorbent like activated charcoal, and carbon nanotubes and nanosensors. Remediation mechanism largely follows sorption, degradation, oxidation, reduction, catalytic conversion, detection and microbial toxicity principles. This review details the mechanisms of action by these various remediating entities, their successful applications in pollution abatement, drawbacks and future prospects.HighlightsEnvironmental remediation using metals, inorganic and organic materials are discussed extensively.Major remediating approaches, viz., physical, physicochemical and chemical are elaborated citing latest references.The significance of biocomposites, biopolymers, polymers, thin films, nanoparticles, nanofilters, nanosensors and sorbents in remediation are highlighted.Pollutant removal from water, air and soil has been precisely discussed.A note on drawbacks, improvement and future prospects of remediating agents is presented.

Nitrate Removal by Zero-Valent Metals: A Comprehensive Review

Nitrate is a widespread water contaminant that can pose environmental and health risks. Various conventional techniques can be applied for the removal of nitrate from water and wastewater, such as biological denitrification, ion exchange, nanofiltration, and reverse osmosis. Compared to traditional methods, the chemical denitrification through zero-valent metals offers various advantages, such as lower costs, simplicity of management, and high efficiencies. The most utilized material for chemical denitrification is zero-valent iron (ZVI). Aluminium (ZVA), magnesium (ZVM), copper (ZVC), and zinc (ZVZ) are alternative zero-valent metals that are studied for the removal of nitrate from water as well as from aqueous solutions. To the best of our knowledge, a comprehensive work on the use of the various zero-valent materials that are employed for the removal of nitrate is still missing. Therefore, in the present review, the most recent papers concerning the use of zero-valent materials for chemical denitrification were analysed. The studies that dealt with zero-valent iron were discussed by considering microscopic (mZVI) and nanoscopic (nZVI) forms. For each Fe0 form, the effects of the initial pH, the presence or absence of dissolved oxygen, the initial nitrate concentration, the temperature, and the dissolved ions on the nitrate removal process were separately evaluated. Finally, the different materials that were employed as support for the nanoparticles were examined. For the other zero-valent metals tested, a detailed description of the works present in the literature was carried out. A comparison of the various features that are related to each considered material was also made.

Synergistic effect of pistachio shell powder and nano-zerovalent copper for chromium remediation from aqueous solution

Pistachio shell powder supported nano-zerovalent copper (ZVC@PS) material prepared by borohydride reduction was characterized using SEM, FTIR, XRD, TGA/DTA, BET, and XPS. SEM, XRD, and XPS revealed the nano-zerovalent copper to consist of a core-shell structure with CuO shell and Cu(0) core with a particle size of 40-100 nm and spherical morphology aggregated on PS biomass. ZVC@PS was found to contain 39% (w/w %) Cu onto the pistachio shell biomass. Batch sorption of Cr(VI) from the aqueous using ZVC@PS was studied and was optimized for dose (0.1-0.5 g/L), initial Cr(VI) concentration(1-20 mg/L), and pH (2-12). Optimized conditions were 0.1 g/L doses of sorbent and pH=3 for Cr(VI) adsorption. Langmuir and Freundlich adsorption isotherm models fitted well to the adsorption behavior of ZVC@PS for Cr(VI) with a pseudo-second-order kinetic behavior. ZVC@PS (0.1g/L) exhibits q_max for Cr(VI) removal up to 110.9 mg/g. XPS and other spectroscopic evidence suggest the adsorption of Cr(VI) by pistachio shell powder, coupled with reductive conversion of Cr(VI) to Cr(III) by ZVC particles to produce a synergistic effect for the efficient remediation of Cr(VI) from aqueous medium.

Novel nanocomposite of biochar-zerovalent copper for lead adsorption

In this study, a composite of zerovalent copper-biochar was investigated for its ability to remove lead from water. The prepared material was characterized by using scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffractomter (XRD), and X-ray photoelectron spectroscopy (XPS). The pH effect on adsorption of lead was investigated within the range of 2-8 and the effect of temperature was studied at 303, 308, 313, and 318 K. The kinetics of lead adsorption on biochar composite was evaluated and the equilibrium time of 12 hr was established. To further evaluate the nature of adsorption, Langmuir model was tested and the adsorption capacities were evaluated for lead adsorption on the surface of copper biochar composite. The activation energy, entropy, and enthalpy values indicated the adsorption phenomenon to be chemisorptive and spontaneous in nature. Comparison of adsorption capacities with the reported adsorbents in the literature concluded zerovalent copper-biochar composite to be an efficient adsorbent for the removal of lead in the experimental conditions under study. RESEARCH HIGHLIGHTS: Highly efficient composite of zerovalent copper with biochar was synthesized for lead adsorption. XPS and XRD shows the presence of zerovalent copper in the biochar composite. pH and temperature were the main governing factors in the adsorption process. Adsorption capacity for lead is higher than many of the reported adsorbents.

Environmental remediation processes by zero valence copper: reaction mechanisms

Recent studies have shown Cu(0) as a promising material for the removal of organic and inorganic pollutants. However, there is no review addressing the studies performed. This fact may be related to the toxicity of the particles and the copper released in solution that has not motivated researchers, which entails in a reduced number of publications. However, studies point out how to solve the problem of Cu deposition in support materials. In this work, a detailed review of Cu(0) applications was performed. The specific focus was the reaction mechanisms related to adsorption, oxidation, and reduction processes. Initially, the resources that allow the understanding of the reaction mechanism, such as characterization techniques and the experimental conditions for investigation of the species involved in the process, were presented. The studies were evaluated separately, showing the mechanisms involved only with the application of Cu(0) in pure and isolated form and in association with oxidizing or reductive agents, combined with irradiation sources and ultrasonic waves and in the form supported in polymer matrices. It was verified that by the proposed reaction mechanisms, the exclusive participation of Cu(0), being the removal process, explained only by the redox behavior of copper. Therefore, the review showed the need for future research regarding the redox behavior of the contaminants.

Film based on magnesium impregnated biochar/cellulose acetate for phosphorus adsorption from aqueous solution

New hybrid film formed by biopolymer cellulose acetate and biochar for P adsorption in aqueous solution.

Polymer-based nanocomposites for heavy metal ions removal from aqueous solution: a review

A review of versatile polymer-based composites containing different functional organic and/or inorganic counterparts for the removal of hazardous metal ions from wastewater solutions.

Copper-catalyzed activation of molecular oxygen for oxidative destruction of acetaminophen: The mechanism and superoxide-mediated cycling of copper species

In this study, the commercial zero-valent copper (ZVC) was investigated to activate the molecular oxygen (O₂) for the degradation of acetaminophen (ACT). 50 mg/L ACT could be completely decomposed within 4 h in the ZVC/air system at initial pH 3.0. The H₂O₂, hydroxyl radical (OH) and superoxide anion radical (O₂^-) were identified as the main reactive oxygen species (ROSs) generated in the above reaction; however, only OH caused the decomposition and mineralization of ACT in the copper-catalyzed O₂ activation process. In addition, the in-situ generated Cu⁺ from ZVC dissolution not only activated O₂ to produce H₂O₂, but also initiated the decomposition of H₂O₂ to generate OH. Meanwhile, the H₂O₂ could also be partly decomposed into O₂^-, which served as a mediator for copper cycling by reduction of Cu²⁺ to Cu⁺ in the ZVC/air system. Therefore, OH could be continuously generated; and then ACT was effectively degraded. Additionally, the effect of solution pH and the dosage of ZVC were also investigated. As a result, this study indicated the key behavior of the O₂^- during Cu-catalyzed activation of O₂, which further improved the understanding of O₂ activation mechanism by zero-valent metals.

Synthesis of polyaniline nanoparticles and their application for the removal of Crystal Violet dye by ultrasonicated adsorption process based on Response Surface Methodology

The present study focuses the synthesis of polyaniline nanoparticles (PANP) by rapid mixing polymerization method. They were recognized by FTIR and SEM techniques. Moreover they were utilized for the removal of Crystal Violet (CV) dye by ultrasonicated adsorption process. It ensures a quick alternative method compared to other conventional processes, which led to enhancement of mass transfer by ultrasound waves. The effectiveness of the process was confirmed through the effect of certain conditions like sonication time, temperature, adsorbent dosage and CV concentrations. The validity of the process was estimated by various adsorption isotherms. Kinetics and thermodynamic studies was also conducted to authenticate the process. The optimum operating parameters (OOP) were evaluated by Response Surface Methodology (RSM) based on central composite design (CCD) for the removal of CV dye. Moreover analysis of variances (ANOVA) was employed to estimate the significance of experimental variables. The predicated removal efficiency was found to be 94.29% which prove to be effectiveness of the process.

Spectroscopic Characterization of Copper-Chitosan Nanoantimicrobials Prepared by Laser Ablation Synthesis in Aqueous Solutions

Copper-chitosan (Cu-CS) nanoantimicrobials are a novel class of bioactive agents, providing enhanced and synergistic efficiency in the prevention of biocontamination in several application fields, from food packaging to biomedical. Femtosecond laser pulses were here exploited to disrupt a Cu solid target immersed into aqueous acidic solutions containing different CS concentrations. After preparation, Cu-CS colloids were obtained by tuning both Cu/CS molar ratios and laser operating conditions. As prepared Cu-CS colloids were characterized by Fourier transform infrared spectroscopy (FTIR), to study copper complexation with the biopolymer. X-ray photoelectron spectroscopy (XPS) was used to elucidate the nanomaterials' surface chemical composition and chemical speciation of the most representative elements. Transmission electron microscopy was used to characterize nanocolloids morphology. For all samples, ξ-potential measurements showed highly positive potentials, which could be correlated with the XPS information. The spectroscopic and morphological characterization herein presented outlines the characteristics of a technologically-relevant nanomaterial and provides evidence about the optimal synthesis parameters to produce almost monodisperse and properly-capped Cu nanophases, which combine in the same core-shell structure two renowned antibacterial agents.

Fate and impact of zero-valent copper nanoparticles on geographically-distinct soils

The fate of engineered zero-valent copper nanoparticles (Cu NPs) in soils collected from geographically-distinct regions of the continental United States and incubated under controlled conditions was investigated with respect to NP affinity for soil surfaces and changes in speciation, as well as their impact on bacterial communities. Soil geochemical properties had a great influence on Cu NP migration and transformation. Translocation of Cu NPs was low in soils enriched in organic matter and high in clay and sandy soils. X-ray absorption spectroscopic analysis showed that the highest rates for transformation to Cu ions and adsorption complexes was in acidic soils. Although there was some change in overall bacterial community richness at the level of order in experimental soil, the level of perturbation was evident in side-by-side comparisons of orders using a 50% microbial community change value (MCC₅₀). This assessment revealed that generally, Sphingomonas, known for its importance for remediation, and Rhizobiales, symbiotic partners with certain plants appeared susceptible to Cu NPs and their transformation products. The ecological importance of organisms from these orders and its greater vulnerability to Cu NPs suggests need for future targeted studies.

Nanoscale zero-valent metals: a review of synthesis, characterization, and applications to environmental remediation

Engineered nanoscale zero-valent metals (NZVMs) representing the forefront of technologies have been considered as promising materials for environmental remediation and antimicrobial effect, due to their high reducibility and strong adsorption capability. This review is focused on the methodology for synthesis of bare NZVMs, supported NZVMs, modified NZVMs, and bimetallic systems with both traditional and green methods. Recent studies have demonstrated that self-assembly methods can play an important role for obtaining ordered, controllable, and tunable NZVMs. In addition to common characterization methods, the state-of-the-art methods have been developed to obtain the properties of NZVMs (e.g., granularity, size distribution, specific surface area, shape, crystal form, and chemical bond) with the resolution down to subnanometer scale. These methods include spherical aberration corrected scanning transmission electron microscopy (Cs-corrected STEM), electron energy-loss spectroscopy (EELS), and near edge X-ray absorption fine structure (NEXAFS). A growing body of experimental data has proven that nanoscale zero-valent iron (NZVI) is highly effective and versatile. This article discusses the applications of NZVMs to treatment of heavy metals, halogenated organic compounds, polycyclic aromatic hydrocarbons, nutrients, radioelements, and microorganisms, using both ex situ and in situ methods. Furthermore, this paper briefly describes the ecotoxicological effects for NZVMs and the research prospects related to their synthesis, modification, characterization, and applications.

Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview

Pollution by metal and metalloid ions is one of the most widespread environmental concerns. They are non-biodegradable, and, generally, present high water solubility facilitating their environmental mobilisation interacting with abiotic and biotic components such as adsorption onto natural colloids or even accumulation by living organisms, thus, threatening human health and ecosystems. Therefore, there is a high demand for effective removal treatments of heavy metals, making the application of adsorption materials such as polymer-functionalized nanocomposites (PFNCs), increasingly attractive. PFNCs retain the inherent remarkable surface properties of nanoparticles, while the polymeric support materials provide high stability and processability. These nanoparticle-matrix materials are of great interest for metals and metalloids removal thanks to the functional groups of the polymeric matrixes that provide specific bindings to target pollutants. This review discusses PFNCs synthesis, characterization and performance in adsorption processes as well as the potential environmental risks and perspectives.

Preparation of a silver nanoparticle-based dual-functional sensor using a complexation–reduction method

A dual-functional sensor based on silver nanoparticles was synthesized by a two-stage procedure consisting of a low-temperature chitosan–Ag⁺ complexation followed by a high-temperature reduction of the complex to form chitosan-capped silver nanoparticles (CS-capped Ag NPs).

Effect of tannic acid–fish scale gelatin hydrolysate hybrid nanoparticles on intestinal barrier function and α-amylase activity

Tannic acid/FSGH nanoparticles can ameliorate Cu²⁺ ion induced intestinal epithelial TJ dysfunction without severely inhibiting the activity of digestive enzymes.

Nanotechnology for Sustainable Water Treatment

As world water demand continues to grow there is a critical need to develop sustainable water treatment solutions. This chapter describes the potential for nanomaterials to improve the sustainability of water treatment. Nanomaterial-driven advances in disinfection, oxidation, membrane separation and groundwater remediation are discussed with a view towards their potential to improve existing technologies. Disinfection technologies include oligodynamic processes with silver nanoparticles to effectively inactivate microorganisms without disinfection byproducts being formed. Oxidation technologies include metal oxide semiconductors and fullerene-based sensitisers acting as light-driven catalysts. Membrane separation processes include the embedding of materials such as zeolites, carbon nanotubes and metal oxides to improve selectivity and reduce fouling. Remediation technologies include iron particles designed to target and transform waste compounds in situ. These and other emerging water treatment technologies must be assessed with life-cycle analysis to determine the full materials and embodied energy costs of acquiring raw materials, manufacturing, use and end of life for the materials contained within each process. These costs must be weighed against the potential benefits for water treatment to determine their sustainability.