Biosorption of copper(II) and cadmium(II) from aqueous solutions by free and immobilized biomass of Aspergillus niger

On the performance of Sargassum-derived calcium alginate ion exchange resins for Pb2+ adsorption: batch and packed bed applications

Driven by climate change and human activity, Sargassum blooming rates have intensified, producing copious amount of the invasive, pelagic seaweed across the Caribbean and Latin America. Battery recycling and lead-smelter wastes have heavily polluted the environment and resulted in acute lead poisoning in children through widespread heavy metal contamination particular in East Trinidad. Our study details a comprehensive investigation into the use of Sargassum (S. natans), as a potential resource-circular feedstock for the synthesis of calcium alginate beads utilized in heavy metal adsorption, both in batch and column experiments. Here, ionic cross-linking of extracted sodium alginate with calcium chloride was utilized to create functional ion-exchange beads. Given the low quality of alginates extracted from Sargassum which produce poor morphological beads, composite beads in conjunction with graphene oxide and acrylamide were used to improve fabrication. Stand-alone calcium alginate beads exhibited superior Pb2+ adsorption, with a capacity of 213 mg g-1 at 20 °C and pH 3.5, surpassing composite and commercial resins. Additives like acrylamide and graphene oxide in composite alginate resins led to a 21-40% decrease in Pb2+ adsorption due to reduced active sites. Column operations confirmed Alginate systems' practicality, with 20-24% longer operating times, 15 times lower adsorbent mass on scale-up and 206% smaller column diameters compared to commercial counterparts. Ultimately, this study advocates for Sargassum-based Alginate ion-exchange beads as a bio-based alternative in Trinidad and developing nations for dealing with heavy metal ion waste, offering superior heavy metal adsorption performance and supporting resource circularity.

Design of biomass-based renewable materials for environmental remediation

Various materials have been used to remove environmental contaminants for decades and have been an effective strategy for environmental cleanups. The current nonrenewable materials used for this purpose could impose secondary hazards and challenges in further downstream treatments. Biomass-based materials present viable, renewable, and sustainable solutions for environmental remediation. Recent biotechnology advances have developed biomaterials with new capacities, such as highly efficient biodegradation and treatment train integration. This review systemically discusses how biotechnology has empowered biomass-derived and bioinspired materials for environmental remediation sustainably and cost-effectively.

Widespread bacterial responses and their mechanism of bacterial metallogenic detoxification under high concentrations of heavy metals

Microbial mineralization is increasingly used in bioremediation of heavy metal pollution, but better mechanistic understanding of the processes involved and how they are regulated are required to improve the practical application of microorganisms in bioremediation. We used a combination of morphological (TEM) and analytical (XRD, XPS, FTIR) methods, together with novel proteomic analyses, to investigate the detoxification mechanisms, used by a range of bacteria, including the strains Bacillus velezensis LB002, Escherichia coli DH5α, B. subtilis 168, Pseudomonas putida KT2440, and B. licheniformis MT-1, exposed to elevated concentrations of Cd²⁺ and combinations of Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺, in the presence and absence of added CaCl₂. Common features of detoxification included biomineralization, including the production of biological vaterite, up-regulation of proteins involved in flagellar movement and chemotaxis, biofilm synthesis, transmembrane transport of small molecules and organic matter decomposition. The putative roles of differentially expressed proteins in detoxification are discussed in relation to chemical and morphological data and together provide important tools to improve screening, selection, and practical application of bacterial isolates in bioremediation of polluted environments.

Enhanced cadmium removal by growing Bacillus cereus RC-1 immobilized on different magnetic biochars through simultaneous adsorption and bioaccumulation

Biosorption of cadmium by growing bacteria immobilized on the three magnetic biochars derived from rice straw (MRSB-pellet), sewage sludge (MSSB-pellet), and chicken manure (MCMB-pellet) was investigated, respectively. Total biosorption capacity of the pellets was tested under varying range of pH, culture time, and initial Cd²⁺ concentration. The maximum biosorption capacity of 93.02 mg/g was obtained with MRSB-pellet, followed by MSSB-pellet (68.02 mg/g) and MCMB-pellet (63.95 mg/g). The biosorption by these immobilized bacterial pellets was more effective than free bacteria; this enhancement could be the result of simultaneous adsorption and bioaccumulation, mainly resulting from magnetic biochar carrier and active bacteria, respectively. The biosorption process by immobilized pellets was primarily driven by ion exchange and complexation, which jointly contributed 73.56% (MRSB-pellet) to 78.62% (MSSB-pellet) of the total adsorption, while the mechanisms of chemical precipitation and physical adsorption could averagely contribute 6.91% (MSSB-pellet) and 11.24% (MRSB-pellet), respectively. Intracellular accumulation was comparably tiny among these mechanisms accounting for 4.30-5.92% of total biosorption; in turn, it would keep intracellular Cd²⁺ concentration below a toxic threshold to maintain cell activity. These suggested that magnetic biochar immobilized bacteria, particularly MRSB-pellet, could be used as an effective biosorbent to remove the Cd²⁺ from the growth medium. This study further deepened our understanding of biosorption process by microorganism immobilized onto magnetic biochar for the metal removal.

The seaweed holobiont: from microecology to biotechnological applications

In the ocean, seaweed and microorganisms have coexisted since the earliest stages of evolution and formed an inextricable relationship. Recently, seaweed has attracted extensive attention worldwide for ecological and industrial purposes, but the function of its closely related microbes is often ignored. Microbes play an indispensable role in different stages of seaweed growth, development and maturity. A very diverse group of seaweed‐associated microbes have important functions and are dynamically reconstructed as the marine environment fluctuates, forming an inseparable ‘holobiont’ with their host. To further understand the function and significance of holobionts, this review first reports on recent advances in revealing seaweed‐associated microbe spatial and temporal distribution. Then, this review discusses the microbe and seaweed interactions and their ecological significance, and summarizes the current applications of the seaweed–microbe relationship in various environmental and biological technologies. Sustainable industries based on seaweed holobionts could become an integral part of the future bioeconomy because they can provide more resource‐efficient food, high‐value chemicals and medical materials. Moreover, holobionts may provide a new approach to marine environment restoration.

Innovative method for encapsulating highly pigmented biomass from Aspergillus nidulans mutant for copper ions removal and recovery

Biosorption has been considered a promising technology for the treatment of industrial effluents containing heavy metals. However, the development of a cost-effective technique for biomass immobilization is essential for successful application of biosorption in industrial processes. In this study, a new method of reversible encapsulation of the highly pigmented biomass from Aspergillus nidulans mutant using semipermeable cellulose membrane was developed and the efficiency of the encapsulated biosorbent in the removal and recovery of copper ions was evaluated. Data analysis showed that the pseudo-second-order model better described copper adsorption by encapsulated biosorbent and a good correlation (r2 > 0.96) to the Langmuir isotherm was obtained. The maximum biosorption capacities for the encapsulated biosorbents were higher (333.5 and 116.1 mg g-1 for EB10 and EB30, respectively) than that for free biomass (92.0 mg g-1). SEM-EDXS and FT-IR analysis revealed that several functional groups on fungal biomass were involved in copper adsorption through ion-exchange mechanism. Sorption/desorption experiments showed that the metal recovery efficiency by encapsulated biosorbent remained constant at approximately 70% during five biosorption/desorption cycles. Therefore, this study demonstrated that the new encapsulation method of the fungal biomass using a semipermeable cellulose membrane is efficient for heavy metal ion removal and recovery from aqueous solutions in multiple adsorption-desorption cycles. In addition, this reversible encapsulation method has great potential for application in the treatment of heavy metal contaminated industrial effluents due to its low cost, the possibility of recovering adsorbed ions and the reuse of biosorbent in consecutive biosorption/desorption cycles with high efficiency of metal removal and recovery.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

Accumulation and subcellular distribution of cadmium in rygegrass induced by Aspergillus niger TL-F2 and Aspergillus flavus TL-F3

Although plant growth-promoting fungi can greatly accelerate the ryegrass bioaccumulation of cadmium (Cd), the underlying mechanisms are not yet well documented. Therefore, we performed a 20-days hydroponic experiment to investigate the effects of Aspergillus niger TL-F2 (A. niger TL-F2) and Aspergillus flavus TL-F3 (A. flavus TL-F3) on accumulation/subcellular distribution of Cd by annual ryegrass Dongmu 70 at different Cd concentrations (0, 2.5, and 5 mg L^-1). Results indicated that both fungal strains promoted ryegrass biomass/growth by about 60%. Furthermore, we found that ryegrass roots (17.8-37.1 μg pot^-1) had a significantly higher capability for Cd uptake than the shoots (1.66-5.45 μg pot^-1) (p < 0.05). Of total Cd in ryegrass plants, 44-67% was in soluble form, 24-37% was in cell wall, and 8.5-25.5% was in organelles. Compared with non-fungus ryegrass, cell wall and soluble Cd fractions in fungus-inoculated roots increased and decreased by 13.5-44% and 21.5-26.4%, respectively. Besides, fungus inoculation generally increased the content of cell wall and soluble Cd fractions in ryegrass shoots. Altogether, the study concludes that inoculation of fungus in ryegrass is a promising approach to improve phytoremediation of Cd contaminated environments.Novelty statement Previous study by Han et al. (2018) examined the resistance of ryegrass plant to Cd stress after its inoculation with Aspergillus aculeatus. In this study, using a hydroponic experiment, we examined the effects of co-application of two species of Aspergillus fungi. i.e. A. niger TL-F2 and A. flavus TL-F3 on ryegrass growth/biomass, Cd absorption by ryegrass shoots and roots, and subcellular distribution of Cd in ryegrass roots and shoots.

Fungal remediation of Cd(ii) from wastewater using immobilization techniques

The pollution of wastewater by heavy metal ions is hazardous to the environment and human health. Cd(ii) has been recognized as one of the heavy metals that causes severe toxic effects. The present study is aimed at removing Cd(ii) from wastewater using fungal biomass either immobilized on loofa sponges or in Ca-alginate beads. Two fungal species were isolated from pools of Cd(ii)-polluted wastewater obtained from some Egyptian industrial plants, and using internal transcribed spacer (ITS) primers, they were molecularly identified as Penicillium chrysogenum and Cephalotheca foveolata with accession numbers MT664773 and MT664745, respectively. The sorbents used in this study were heat-inactivated mycelia of P. chrysogenum (PEN), heat-inactivated mycelia of C. foveolata (CEP), P. chrysogenum immobilized on loofa sponge (PEN-ILS), C. foveolata immobilized on loofa sponge (CEP-ILS), P. chrysogenum immobilized in Ca-alginate beads (PEN-IA), and C. foveolata immobilized in Ca-alginate beads (CEP-IA). The effects of pH, contact time, initial Cd(ii) concentration, and interfering ions on Cd(ii) removal from aqueous solution were tested. Maximum Cd(ii) sorption capacity was obtained at pH 7.0, with thirty minutes contact time and 0.5 mol l⁻¹ initial Cd(ii) concentration for all sorbents used. However, Ca²⁺ displayed synergistic interference with Cd(ii) that was greater than that from Na⁺ and K⁺, with decreasing sorption capacity for all sorbents. Optimum conditions were applied to real wastewater samples collected from two Egyptian industrial plants. All sorbents had the ability to remove Cd(ii) from wastewater samples, and enhanced removal occurred when fungal cells were immobilized as compared to free cells.

The pollution of wastewater by heavy metal ions is hazardous to the environment and human health.

Microbial Cd(II) and Cr(VI) resistance mechanisms and application in bioremediation

The heavy metals cadmium (Cd) and chromium (Cr) are extensively used in industry and result in water and soil contamination. The highly toxic Cd(II) and Cr(VI) are the most common soluble forms of Cd and Cr, respectively. They enter the human body through the food chain and drinking water and then cause serious illnesses. Microorganisms can adsorb metals or transform Cd(II) and Cr(VI) into insoluble or less bioavailable forms, and such strategies are applicable in Cd and Cr bioremediation. This review focuses on the highlighting of novel achievements on microbial Cd(II) and Cr(VI) resistance mechanisms and their bioremediation applications. In addition, the knowledge gaps and research perspectives are also discussed in order to build a bridge between the theoretical breakthrough and the resolution of Cd(II) and Cr(VI) contamination problems.

The improved methods of heavy metals removal by biosorbents: A review

For decades, a vast array of innovative biosorbents have been found out and used in the removal of heavy metals, including bacteria, algae and fungi, etc. Although extensive biological species have been tried as a biosorbent for heavy metals removal, for removal efficiency or economy efficiency limited, it has failed to make a substantial breakthrough in practical application. Thus, many improved methods based on biosorbents emerged. In this review, based on the literature and our research results, we highlight three types of novel methods for biosorbents removal of heavy metals: chemical modification of biosorbents; biomass and chemical materials combination; multiple biomass complex systems. We mainly focus on their configuration, biosorption performance, their creation method, regeneration/reuse, their application and development in the future. Through the comparative analysis of various methods, we think that intracellular autogenous nanomaterials may open up another window in biosorption of heavy metals area. At the same time, the combination of various treatment methods will be the development tendency of heavy metal pollution treatment in the future.

Application of Simplicillium chinense for Cd and Pb biosorption and enhancing heavy metal phytoremediation of soils

Phytoremediation is an effective approach to control soil heavy metal pollution. This study isolated a fungus strain from soils contaminated by cadmium (Cd) and lead (Pb) in Zhalong Wetland (China), which was identified as Simplicillium chinense QD10 via both genotypic and phenotypic analysis. The performance and mechanism of S. chinense QD10 in Cd and Pb adsorption was unraveled by morphological analysis and biosorption test, and its roles in ameliorating phytoremediation by Phragmites communis were tested in pot-experiments. Cd biosorption was attributed to the formation of Cd-chelate, whereas Pb was predominantly adsorbed by extracellular polymeric substances. Metal biosorption followed Langmuir isotherm, and the maximum biosorption capacity was 88.5 and 57.8 g/kg for Cd and Pb, respectively. Colonized in soils, such biosorption behavior of S. chinense QD10 can generate gradients of available Cr or Pb and drive their enrichment. Accordingly, S. chinense QD10 amendment significantly enhanced the phytoextraction of Cd and Pb by P. communis, possibly attributing to rhizospheric enrichment of Cd or Pb and defending effects on plants, explained by the significant removal of acid-extractable and reducible metals in soils and the increase of Cd and Pb content in P. communis tissues. The present study explored the mechanisms of S. chinense QD10 in Cd and Pb biosorption and proved its potential in ameliorating the phytoremediation performance at metal contaminated sites.

Response mechanism of mine-isolated fungus Aspergillus niger IOC 4687 to copper stress determined by proteomics

Proteomic analysis of the fungus Aspergillus niger showed that its capacity to absorb metals was boosted by physiological modification under metal stress conditions.

Biosorption of copper, zinc, cadmium and chromium ions from aqueous solution by natural foxtail millet shell

The industrial effluents discharge including heavy metals drain into the river, which has given rise to many problems of hazarding aquatic ecosystems and human health. Biosorption serves as the adsorption of heavy metals onto a natural adsorbent, it is becoming a potential alternative for toxic metals removal from industrial effluents in the last decades. The objectives of present research were to investigate the biosorption behaviors and the mechanisms of copper (Cu), zinc (Zn), cadmium (Cd) and chromium (Cr) ions, respectively onto foxtail millet shell as a new natural biosorbent in aqueous solution. The effects of pH (2.0-6.0), contact time (5.0-240.0 min), initial metal ions concentration (25.0-300.0 mg/L), particle size (0.25-2.0 mm) and biosorbent dosage (1.0-6.0 g/L) on the adsorption efficiency of the target metals using foxtail millet shell were evaluated in batch experiments. The models of isotherms and kinetics were used to assess the removal behaviors of Cu, Zn, Cd and Cr ions from aqueous solution by foxtail millet shell. The results showed that the best fitting equilibrium isotherm models for Cu, Zn, Cd and Cr ions were Freundlich (Cu and Zn) and Langmuir (Cd and Cr), respectively under the proper adsorption conditions. The maximum biosorption capacities were 11.89, 10.59, 12.48 and 11.70 mg g^-1 of Cu, Zn, Cd and Cr, respectively by terms of Langmuir model. The kinetics of biosoption the target metal ions processes were best explained by pseudo-second-order kinetic model. Furthermore, pseudo-second-order and intraparticle diffusion models were cooperative mechanism during the whole biosorption. In addition, the pores on the surface of the shell were covered and then became smooth after biosorption through Scanning electron microscope (SEM) revealed, which demonstrated that the target metal ions were adsorbed by foxtail millet shell. The results of Energy dispersive spectrometer (EDS) further gave evidences that Cu, Zn, Cd and Cr ions were adsorbed onto surface of the adsorbent, respectively. Analysis of Fourier transform infrared spectroscopy (FTIR) demonstrated that various functional groups, such as C-H, C˭O, C˭C, C-O, O-S-O and Si-O groups were engaged in the interaction between foxtail millet shell and Cu, Zn, Cd and Cr ions. This paper provided evidences that foxtail millet shell was a potential and efficient biosorbent on removal of Cu, Zn, Cd and Cr ions from aqueous solutions, due to its high biosorption availability, capacity and low cost.

Biosorption of copper ions from aqueous solution using rape straw powders: Optimization, equilibrium and kinetic studies

In this paper, the adsorption behaviors of Cu(II) from the aqueous solution using rape straw powders were studied. The effects of initial Cu(II) concentration, pH range and absorbent dosage on the adsorption efficiency of Cu(II) by rape straw powder were investigated by Box-Behnken Design based on response surface methodology. The values of coefficient constant of the nonlinear models were 0.9997, 0.9984 and 0.9944 for removal Cu(II) from aqueous solution using rape straw shell, seed pods and straw pith core, respectively, which could navigate the design space for various factors on effects of biosorption Cu(II) from aqueous solution. The various factors of pH and biosorbents dosage were the key factors that affecting the removal efficiency of Cu(II) from aqueous solution. The biosorption equilibrium data presented its favorable monolayer adsorption Cu(II) onto shell, seed pods and straw pith core, respectively. The pseudo-second order kinetic model was the proper approach to determine the adsorption kinetics. The biosorption of Cu(II) onto surfaces of rape straw powders were confirmed and ion-exchanged in the adsorption process by energy dispersive spectrometer. The critical groups, -OH, -CH, -NH₃⁺, -CH₃, -NH and -C-O, exhibited by the infrared spectra results, changed to suggest that these groups played critical roles, especially -CH₃ in the adsorption of copper ions onto rape straw powders. The study provided evidences that rape straw powders can be used for removing Cu(II) from aqueous water.

Synthesis of KMnO4-treated magnetic graphene oxide nanocomposite (Fe3O4@GO/MnO x ) and its application for removing of Cu2+ ions from aqueous solution

A magnetic KMnO₄-treated graphene-oxide-based nanocomposite, Fe₃O₄@GO/MnO _x , was synthesized through a facile hydrothermal technique. The properties of the Fe₃O₄@GO/MnO _x nanocomposite were characterized by SEM, XRD and FTIR. Batch experiments showed that the maximum adsorption capacity calculated by the Langmuir model for Cu²⁺ was 62.65 mg g^-1 at T = 303.15 K. Kinetics and XPS analysis also revealed that the mechanism of Cu²⁺ removal was mainly a chemical adsorption process involving both the MnO _x particles and oxygen functional groups. The prepared Fe₃O₄@GO/MnO _x was found to be an ideal adsorbent for the removal of Cu²⁺ ions due to the MnO _x particle coating, and was easily separated using a magnetic field after utilization. Reusability studies imply that Fe₃O₄@GO/MnO _x is a suitable material for heavy metal ion removal from aqueous solutions in real applications.

Adsorption of heavy metals on conventional and nanostructured materials for wastewater treatment purposes: A review

The problem of water pollution is of a great concern. Adsorption is one of the most efficient techniques for removing noxious heavy metals from the solvent phase. This paper presents a detailed information and review on the adsorption of noxious heavy metal ions from wastewater effluents using various adsorbents - i.e., conventional (activated carbons, zeolites, clays, biosorbents, and industrial by-products) and nanostructured (fullerenes, carbon nanotubes, graphenes). In addition to this, the efficiency of developed materials for adsorption of the heavy metals is discussed in detail along with the comparison of their maximum adsorption capacity in tabular form. A special focus is made on the perspectives of further wider applications of nanostructured adsorbents (especially, carbon nanotubes and graphenes) in wastewater treatment.

Adsorption and Desorption Characteristics of Cd2+ and Pb2+ by Micro and Nano-sized Biogenic CaCO3

The purpose of this study was to elucidate the characteristics and mechanisms of adsorption and desorption for heavy metals by micro and nano-sized biogenic CaCO3 induced by Bacillus subtilis, and the pH effect on adsorption was investigated. The results showed that the adsorption characteristics of Cd2+ and Pb2+ are well described by the Langmuir adsorption isothermal equation, and the maximum adsorption amounts for Cd2+ and Pb2+ were 94.340 and 416.667 mg/g, respectively. The maximum removal efficiencies were 97% for Cd2+, 100% for Pb2+, and the desorption rate was smaller than 3%. Further experiments revealed that the biogenic CaCO3 could maintain its high adsorption capability for heavy metals within wide pH ranges (3-8). The FTIR and XRD results showed that, after the biogenic CaCO3 adsorbed Cd2+ or Pb2+, it did not produce a new phase, which indicated that biogenic CaCO3 and heavy metal ions were governed by a physical adsorption process, and the high adsorptive capacity of biogenic CaCO3 for Cd2+ and Pb2+ were mainly attributed to its large total specific surface area. The findings could improve the state of knowledge about biogenic CaCO3 formation in the environment and its potential roles in the biogeochemical cycles of heavy metals.

Anionically reinforced hydrogel network entrapped fungal cells for retention of cadmium in the contaminated aquatic media

A novel biomass/polymer composite was fabricated by embedding Thamnidium elegans cells in acrylic network of p(3-Methoxyprophyl)acrylamide p(MPA) enriched with 2-Akrylamido-2-methyl-1-propane sulfonic acid (AMPS). Cd(II) retention potential of hydrogel (p(MPA-co-AMPS)) increased by 20.66% times after this enrichment. The gel matrix could be effectively entrapped the biomass and resulting sorbent applied to remove Cd(II) from water in batch and continuous modes. The main physico-chemical parameters are discussed in addition to characterization, regeneration and application studies of the suggested sorbent. Equilibrium occurred within 30 min and Langmuir model predicted the equilibrium data. Kinetics of Cd(II) removal onto immobilized biomass is modeled using the pseudo-second-order rate equation. Maximum monolayer sorption capacity was estimated to be 123.76 mg g^-1 at 25 °C. Designed composite was successfully applied for the removal of Cd(II) from industrial wastewater. EDTA and HNO₃ can be efficiently used for Cd(II) recovery and composite sorbent recycled for at least 12 cycles with nearly stable sorption performance.

Biosorption Performance of Encapsulated Candida krusei for the removal of Copper(II)

The use of microorganisms in biosorption is one of the most promising ways to remove trace amounts of heavy metal ions. Nevertheless, the enhancement of the successful removal of heavy metal ions by using different combinations of biosorbents is not generally guaranteed which leaves room to explore the application of the technique. In this study, the performance of free and immobilized forms of a yeast strain, Candida krusei (C. krusei), and calcium alginate (CaAlg) are evaluated for their ability to remove copper(II). Infrared spectroscopy, studies on the effects of pH and temperature, and kinetics and isotherm modelling are carried out to evaluate the biosorption. The infrared spectroscopy shows that the primary biosorption sites on the biosorbents are carboxylate groups. In addition, a higher pH and higher temperatures promote biosorption while a decline in biosorption ability is observed for C. krusei at 50 °C. The kinetics study shows that C. krusei, CaAlg and immobilized C. krusei (MCaAlg) conform with good correlation to pseudo-second order kinetics. MCaAlg and CaAlg fit well to the Langmuir isotherm while C. krusei fits well to the Temkin isotherm. From the experimental data, encapsulating C. krusei showed improved biosoprtion and address clogging in practical applications.

Poly-γ-glutamic acid coupled Pseudomonas putida cells surface-displaying metallothioneins: composited copper(ii) biosorption and inducible flocculation in aqueous solution

Schematic illustration of the preparation, biosorption, and induced flocculation of the biocomposite MB546-PGA.

A novel approach of utilization of the fungal conidia biomass to remove heavy metals from the aqueous solution through immobilization

The biomass of filamentous fungi is an important cost-effective biomass for heavy metal biosorption. However, use of free fungal cells can cause difficulties in the separation of biomass from the effluent. In this study, we immobilized the living conidia of the heavy metal-resistant Penicillium janthinillum strain GXCR by polyvinyl alcohol (PVA)-sodium alginate (SA) beads to remove heavy metals from an aqueous solution containing a low concentration (70 mg/L) of Cu, Pb, and Cd. The PVA-SA-conidia beads showed perfect characters of appropriate mechanical strength suitable for metal removal from the dynamic wastewater environment, an ideal settleability, easy separation from the solution, and a high metal biosorption and removal rate even after four cycles of successive sorption-desorption of the beads, overcoming disadvantages when fungal biomasses alone are used for heavy metal removal from wastewater. We also discuss the major biosorption-affecting factors, biosorption models, and biosorption mechanisms.

Integrated bioleaching of copper metal from waste printed circuit board-a comprehensive review of approaches and challenges

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques-mechanical treatments used to recover valuable metals, including copper-are not sustainable in the long term. Chemical leaching is rapid and efficient but causes secondary pollution. Bioleaching is a promising approach, eco-friendly and economically feasible, but it is slower process. This review considers the recycling potential of microbes and suggests an integrated bioleaching approach for Cu extraction and recovery from WPCBs. The proposed recycling system should be more effective, efficient and both technically and economically feasible.

Removal of toxic zinc from water/wastewater using eucalyptus seeds activated carbon: non-linear regression analysis

In the present study, a novel activated carbon was prepared from low-cost eucalyptus seeds, which was utilised for the effectively removal of toxic zinc from the water/wastewater. The prepared adsorbent was studied by Fourier transform infrared spectroscopy and scanning electron microscopic characterisation studies. Adsorption process was experimentally performed for optimising the influencing factors such as adsorbent dosage, solution pH, contact time, initial zinc concentration, and temperature for the maximum removal of zinc from aqueous solution. Adsorption isotherm of zinc removal was ensued Freundlich model, and the kinetic model ensued pseudo-second order model. Langmuir monolayer adsorption capacity of the adsorbent for zinc removal was evaluated as 80.37 mg/g. The results of the thermodynamic studies suggested that the adsorption process was exothermic, thermodynamically feasible and impulsive process. Finally, a batch adsorber was planned to remove zinc from known volume and known concentration of wastewater using best obeyed model such as Freundlich. The experimental details showed the newly prepared material can be effectively utilised as a cheap material for the adsorption of toxic metal ions from the contaminated water.

New trends in removing heavy metals from wastewater

With the development of researches, the treatments of wastewater have reached a certain level. Whereas, heavy metals in wastewater cause special concern in recent times due to their recalcitrance and persistence in the environment. Therefore, it is important to get rid of the heavy metals in wastewater. The previous studies have provided many alternative processes in removing heavy metals from wastewater. This paper reviews the recent developments and various methods for the removal of heavy metals from wastewater. It also evaluates the advantages and limitations in application of these techniques. A particular focus is given to innovative removal processes including adsorption on abiological adsorbents, biosorption, and photocatalysis. Because these processes have leaded the new trends and attracted more and more researches in removing heavy metals from wastewater due to their high efficency, pluripotency and availability in a copious amount. In general, the applicability, characteristic of wastewater, cost-effectiveness, and plant simplicity are the key factors in selecting the most suitable method for the contaminated wastewater.

Biosorption of Pb(ii) and Fe(iii) from aqueous co-solutions using chemically pretreated oil palm fronds

The removal of Pb(ii) and Fe(iii) from aqueous solutions using specially pretreated oil palm fronds (OPF) as biosorbents was investigated.

Waste biomass adsorbents for copper removal from industrial wastewater--a review

Copper (Cu(2+)) containing wastewaters are extensively released from different industries and its excessive entry into food chains results in serious health impairments, carcinogenicity and mutagenesis in various living systems. An array of technologies is in use to remediate Cu(2+) from wastewaters. Adsorption is the most attractive option due to the availability of cost effective, sustainable and eco-friendly bioadsorbents. The current review is dedicated to presenting state of the art knowledge on various bioadsorbents and physico-chemical conditions used to remediate Cu(2+) from waste streams. The advantages and constraints of various adsorbents were also discussed. The literature revealed the maximum Cu adsorption capacities of various bioadsorbents in the order of algae>agricultural and forest>fungal>bacterial>activated carbon>yeast. However, based on the average Cu adsorption capacity, the arrangement can be: activated carbon>algal>bacterial>agriculture and forest-derived>fungal>yeast biomass. The data of Cu removal using these bioadsorbents were found best fit both Freundlich and Langmuir models. Agriculture and forest derived bioadsorbents have greater potential for Cu removal because of higher uptake, cheaper nature, bulk availability and mono to multilayer adsorption behavior. Higher costs at the biomass transformation stage and decreasing efficiency with desorption cycles are the major constraints to implement this technology.

Investigating metal removal potential by Effective Microorganisms (EM) in alginate-immobilized and free-cell forms

Metal removal potential of both alginate-immobilized and free-cells of Effective Microorganisms (EM-1™ Inoculant) was investigated in this study. Results revealed that removal of Cr(III), Cu(II) and Pb(II) followed a similar trend where alginate-immobilized EM were more efficient compared to free-cells of EM. For these metals, 0.940, 2.695 and 4.011 mg g(-1) of Cr(III), Cu(II) and Pb(II) were removed compared to only 0.160, 0.859 and 0.755 mg ml(-1) removed by free-cells, respectively. The higher efficiency of alginate-immobilized EM was primarily attributed to the alginate matrix. This was evident when both alginate-immobilized EM and plain alginate beads (without EM), were not significantly different in their removal efficacies. Presence of alginate also enhanced the use of the biosorbents as maximum metal sorption was achieved after 120 min as opposed to only 60 min for free-cells. EM per se in immobilized or free-cell forms did not enhance metal removal efficacy.

Removal and recovery of copper and nickel ions from aqueous solution by poly(methacrylamide-co-acrylic acid)/montmorillonite nanocomposites

Nanocomposite hydrogels based on poly(methacrylamide-co-acrylic acid) and nano-sized montmorillonite were prepared by aqueous dispersion and in situ radical polymerization. Optimum sorption conditions were determined as a function of montmorillonite content, contact time, pH, and temperature. The equilibrium data of Cu(2+) and Ni(2+) conformed to the Freundlich and Langmuir isotherms in terms of relatively high regression values. The maximum monolayer adsorption capacity of the nanocomposite hydrogel (with 3 wt% montmorillonite content), as obtained from the Langmuir adsorption isotherm, was found to be 49.26 and 46.94 mg g(-1) for Cu(2+) and Ni(2+), respectively, at contact time = 60 min, pH = 6.8, adsorbent dose = 100 mg/ml, and temperature = 318 K. Kinetic studies of single system indicated that the pseudo-second order is the best fit with a high correlation coefficient (R (2) = 0.97-0.99). The result of five times sequential adsorption-desorption cycle shows a good degree of desorption and a high adsorption efficiency.

Removal of Cd(II), Cu(II) and Zn(II) from aqueous solutions by live Phanerochaete chrysosporium

Living Phanerochaete chrysosporium mycelia were used to remove heavy metals of Cd(II), Cu(II) and Zn(II) in auqeous solution. The uptake of heavy metal by the mycelia was dependent on the environmental conditions. The optimum biosorption conditions of Cd(II), Cu(II), and Zn(II) were pH 5.5-6.5 at 37 degrees C, and 6 h. Under these conditions, the fungal biosorbent removed Cd(II), Cu(II), and Zn(II) rapidly and efficiently with maximum metal removal capacities of 59.77 mg/g, 74.78 mg/g, and 54.12 mg/g, respectively. The pseudo second-order kinetic model was superior to the pseudo first-order kinetic model, which indicated that the change ofthe surface sorption sites number was proportional to the square ofthe remaining unoccupied surface sites number. Fourier transform infrared (FT-IR) spectra indicated that hydroxyl and carboxyl groups were relevant to biosorption. Some crystal particles were found on the surface of the P. chrysosporium under scanning electron microscopy. Energy dispersive X-ray analysis and FT-IR revealed that amino acids and proteins were involved in binding metal ions. The results demonstrated that P. chrysosporium was a good potential biosorbent for adsorbing heavy metals.