Effect of leachate injection modes on municipal solid waste degradation in anaerobic bioreactor

A review of existing methods for predicting leachate production from municipal solid waste landfills

Landfilling is one of the predominant methods of municipal solid waste (MSW) disposal worldwide, while the generation of leachate, a kind of toxic wastewater, is among the primary factors behind landfill instability and environmental contamination problems. Precise prediction of leachate production is crucial to landfill safety evaluation and design. This paper presents a comprehensive review of methods for predicting leachate production from MSW landfills. Firstly, compositional characteristics of MSW and leachate generation mechanism are analysed. Factors influencing leachate production are summarised based on the generation mechanism, including the components of MSW, climatic conditions, landfill structure, and environmental factors. Then, we classified the existing methods for predicting leachate production into four categories: water balance formula, water balance model, empirical formula, and artificial intelligence model methods. Advantages, disadvantages, and applicability of different leachate production prediction methods are compared and analysed. Furthermore, limitations in the existing leachate production prediction methods for MSW landfills and scope for future research are discussed.

Experimental investigation and multi-performance optimization of the leachate recirculation based sustainable landfills using Taguchi approach and an integrated MCDM method

Landfill leachates contain harmful substances viz. chemicals, heavy metals, and pathogens, that pose a threat to human health and the environment. Unattended leachate can also cause ground water contamination, soil pollution and air pollution. This study focuses on management of leachate, by recirculating the rich, nutrient-filled fluid back into the landfills, turning it to a bioreactor, thereby maximising the performance parameters of landfills favourable for electricity production by the waste to energy plants. This study demonstrates a sustainable alternative method for utilising the fluid, rather than treating it using an extremely expensive treatment process. Further, it also experimentally investigates the effect of varying levels of five input parameters of the landfill including waste particle size, waste addition, inorganic content in waste, leachate recirculation rate, and landfill age, each at five levels, on the multiple performance of the landfill using Taguchi's L25 standard orthogonal array. Experimental results are analysed using an integrated MCDM approach i.e. MEREC-PIV method and statistical techniques such as analysis of mean (ANOM) and analysis of variance (ANOVA). The results indicate that the optimal setting of the input parameters is waste particle size at 9 ppm, waste addition at 80 Ktoe, inorganic content in waste at 2%, leachate recirculation rate at 250 l/day and landfill age at 3 years. Further, inorganic content waste is found to be the most significant parameter for the multiple performance of the landfill. This study presents a novel approach to produce input parameters for power plants which may enhance their profitability and sustainability.

Contribution of the bacterial community of poorly fermented oat silage to biogas emissions on the Qinghai Tibetan Plateau

To better utilize poorly fermented oat silage on the Qinghai Tibetan Plateau, 239 samples of this biomass were collected from the plateau temperate zone (PTZ), plateau subboreal zone (PSBZ), and nonplateau climatic zone (NPCZ) in the region and analyzed for microbial community, chemical composition and in vitro gas production. Climatic factors affect the bacterial α-diversity and β-diversity of poorly fermented oat silage, which led to the NPCZ having the highest relative abundance of Lactiplantibacillus plantarum. Furthermore, the gas production analysis showed that the NPCZ had the highest maximum cumulative gas emissions of methane. Through structural equation modeling analysis, environmental factors (solar radiation) affected methane emissions via the regulation of lactate production by L. plantarum. The enrichment of L. plantarum contributes to lactic acid production and thereby enhances methane emission from poorly fermented oat silage. Notably, there are many lactic acid bacteria detrimental to methane production in the PTZ. This knowledge will be helpful in revealing the mechanisms of environmental factors and microbial relationships influencing the metabolic processes of methane production, thereby providing a reference for the clean utilization of other poorly fermented silage.

Effect of increased temperature and leachate recirculation on biogas production and settlement of municipal solid waste

This study evaluated the effects of increased temperature and leachate recirculation on volatile solids (VS), biogas, hydrogen sulphide (H₂S) leachate quality (pH and chemical oxygen demand) and the settlement of municipal solid waste (MSW). Three large-scale tests were conducted with no leachate recirculation at 21°C, weekly leachate recirculation at 20°C and weekly leachate recirculation at 50°C. Leachate recirculation and increased temperature accelerated biodegradation and pushed forward the onset time (from 27 to 8 days). The increase of biodegradation activity was reflected in the change of biogas production, VS and settlement. Compressibility index Cc, increased from 0.71 and 0.77 at 21°C to 0.83 when the temperature was 50°C. In addition, leachate recirculation and high temperature reduced H₂S concentration levels by inhibiting the growth of sulphate-reducing bacteria and leachate recirculation lowered H₂S production by dissolving the high H₂S presence. The results showed that MSW can have significantly changed mechanical and biochemical behaviour under different temperatures and saturations. The results help understand the processes in landfills for more effective short-term and long-term design and management.

Role of Lactiplantibacillus paraplantarum during anaerobic storage of ear-removed corn on biogas production

To optimize the volatile fatty acid production for anaerobic fermentation, the ear-removed corn was ensiled without (control) or with Lactiplantibacillus plantarum (LP), Lacticaseibacillus paracasei (LC) and L. paraplantarum (LpP). Inoculation of LpP increased acetic acid content by 40%, and decreased butyric acid content by 38% in relative to control. Moreover, inoculation of LpP decreased the bacterial alpha diversity indices, while inherent species of Lentilactobacillus buchneri and L. hilgardii dominated the anaerobic fermentation. In particular, inoculation of LpP restricted the growth of yeasts and production of propionic acid at the early stage of storage, but continuously stimulated anaerobic fermentation, resulting in a higher maximal cumulative gas emissions of methane (by about 20 %) than that of LP and LC. Therefore, inoculation of LpP during anaerobic storage was favorable to produce intermediate metabolites (acetic acid) for subsequent biogas production of ear-removed corn.

Ambient ultraviolet radiation: A new factor affecting anaerobic fermentation of oat and subsequent methane emissions

To investigate the effect of ambient ultraviolet (UV) radiation on the Qinghai-Tibetan Plateau on anaerobic fermentation and subsequent methane emissions, oats grown under different ambient UV conditions (UV1, 100% ambient UV radiation; UV2, 50% ambient UV radiation) were fermented with molasses and Lactobacillus plantarum (LP) inoculant treatments. The UV2 treatment increased (P < 0.05) epiphytic bacterial counts and reduced (P < 0.05) the water-soluble carbohydrate contents of oat. Both the UV2 treatment and the LP inoculant substantially increased the abundance of Lactobacillus and inhibited detrimental microorganisms (enterobacteria and yeasts) during anaerobic fermentation, resulting in the absence of butyric acid. The UV2 treatment increased (P < 0.05) the acid detergent fiber contents after anaerobic fermentation and indirectly increased (P < 0.05) methane emissions by 8.52-14.69% during in vitro ruminal digestion. This study demonstrated that low ambient UV radiation during cultivation facilitated anaerobic fermentation and consequently enhanced subsequent methane emissions from the rumen.

Investigating the Effects of Aerobic Hydrolysis on Scum Layer Formation during the Anaerobic Digestion of Corn Stalk Particles

The scum layer of straw anaerobic digestion significantly impacts biogas production efficiency. The initial floating of straw after entering the reactor is an important reason for scum layer formation. Improving the settleability of straw particles and reducing the initial floating time of straw are crucial to suppressing the scum layer, and accelerating the water absorption rate of straw entering the reactor is the key to reducing the floating time. Therefore, in this study the corn stalks were kneaded and rolled, and the stalk particles were tested for water absorption and aerobic hydrolysis. The results showed that the water absorption rate of the stalks after conditioning was significantly accelerated, and the water absorption rate was 120% higher than that of the untreated stalks after absorbing water for 12 h. Simultaneously, aerobic hydrolysis destroys the lignocellulose structure to a certain extent, increases the porosity of the stalk particles, and further improves the settleability of the stalk particles. In the subsequent anaerobic digestion process, scum decreased significantly: the scum layer volume ratio was 13% lower than untreated stalks. The methane production efficiency of anaerobic digestion was significantly improved, and the optimal hydrolysis time was 12 h. At this time, the cumulative methane production of the milled treated stalks reached the maximum value of 319.64 mL/g VS, which was 26.59% higher than that of the untreated stalks.

Fermentation Quality, In Vitro Digestibility, and Aerobic Stability of Total Mixed Ration Silage in Response to Varying Proportion Alfalfa Silage

This study aimed to evaluate the effects of different proportions of alfalfa silage on the fermentation quality, in vitro digestibility, and aerobic stability of total mixed ration (TMR) silage. Three TMRs were prepared with different silage contents on a fresh matter basis: (1) 60% alfalfa silage (AS60), (2) 40% alfalfa silage (AS40), and (3) 20% alfalfa silage (AS20). The lactic acid in AS60 did not increase after 30 days of ensiling (p > 0.05). Butyric acid was detected in the AS20 group after 14 days of ensiling. The AS60 group showed significantly higher in vitro dry matter digestibility than the AS20 group (p < 0.05). The aerobic stability of TMR silage gradually increased with a decreasing percentage of alfalfa silage (p < 0.05). Unlike AS60, which directly gained an acidic environment from the alfalfa silage, AS40 developed a stable acidic environment during ensiling and further improved aerobic stability. However, when the percentage of alfalfa silage was reduced to 20%, a risk of clostridial spoilage occurred in the TMR silage. Therefore, the addition of 40% alfalfa silage to TMR is optimal and could achieve both good fermentation quality and considerable resistance to aerobic deterioration in TMR silage.

Evaluation of leachate production and level in municipal solid waste landfills considering secondary compression

Landfilled municipal solid waste (MSW) in developing countries generally produces a large amount of leachate due to high moisture content. The estimation of leachate production and level is of great importance to the capacity design of leachate treatment plants and the stability analysis of landfills. In this study, the leachate production ratios (the ratio of leachate mass to waste mass) in different countries and cities were first summarized to reveal the basic status of leachate generation. Then, a model was established to calculate the leachate production and level that considers the rainfall infiltration and the water released from MSW due to both primary and secondary compression (ignored in previous models). Finally, the proposed model was used in a case study of Laogang Landfill in Shanghai, China. It was found that the leachate proportion produced by compression was much higher compared with that produced by rainfall infiltration, ranging from 49 (rainy season) to 93% (dry season). The leachate released from waste due to secondary compression accounted for a high proportion (up to 25%) of the total leachate production, especially for aged MSW. The calculated leachate discharge amount and leachate level were close to the measured values because the possible low permeability layer at the bottom of the landfill was considered in this model.

Succession of the microbial community during the process of mechanical and biological pretreatment coupled with a bio-filter for removal of VOCs derived from domestic waste: a field study

Changes in the microbial community can not only reflect the efficiency of waste disposal, but also reveal the effect of odor control during the treatment process. This study aimed to evaluate the removal efficiency of volatile organic compounds (VOCs) by the process of mechanical and biological pretreatment (MBP) coupled with a bio-filter (BF). An interesting phenomenon was found that the VOCs were effectively reduced through the MBP process. To understand the removal mechanism of VOCs, the abundance and diversity of microbial bacteria and fungi in the biological dehydration (BD) process, biological fermentation process, and BF process were explored. The abundance and diversity of microbes in the BF were relatively high, of which the bacteria such as Lactobacillus, Bacillus and Candida were the dominant species for VOCs treatment. The proposed technical process and the positive effects observed in this study indicate that it could be applied to the control of VOCs in the treatment of domestic waste.

Community Structure of Bacteria and Archaea Associated with Geotextile Filters in Anaerobic Bioreactor Landfills

Landfills are an example of an environment that contains highly complex communities of microorganisms. To evaluate the microbial community structure, four stainless steel pilot-scale bioreactor landfills with single- and double-layered geotextile fabric were used. Two reactors (R-1 and R-2) contained municipal solid waste (MSW) and sewage sludge, while the other two reactors (R-3 and R-4) contained only MSW. A single layer of geotextile fabric (R2GT3 and R3GT3) was inserted in the drainage layers of the two reactors (R-2 and R-3), while a double layer of geotextile fabric (R4GT2 and R4GT1) was inserted in one of the reactors (R-4). Scanning electron microscopy demonstrated that biomass developed on the geotextile fabrics after 540 days of bioreactor operation. The metagenomics analyses of the geotextile samples by 16S rRNA gene sequencing indicated that the geotextile bacterial communities were dominated by the phyla Firmicutes, Bacteroidetes, and Thermotogeae, while Proteobacteria were detected as the rarest bacterial phylum in all the geotextile samples. Treponema, Caldicoprobacter, and Clostridium were the most dominant anaerobic and fermentative bacterial genera associated with the geotextile fabric in the bioreactors. Euryarchaeota was the predominant archaean phylum detected in all the geotextile samples. In the archaeal communities, Methanosarcina, and Vadin CA11 were identified as the predominant genera. The diversity of microorganisms in landfill bioreactors is addressed to reveal opportunities for landfill process modifications and associated operational optimization. Thus, this study provides insights into the population dynamics of microorganisms in geotextile fabrics used in bioreactor landfills.

Transitions of microbial communities in the solid and liquid phases during high-solids anaerobic digestion of organic fraction of municipal solid waste

This study presents a microbiological diagnosis of a mesophilic high-solids anaerobic digestion (HSAD) system with percolate recirculation. The results demonstrated a significant decrease in microbial diversity in both the solid digestate and the liquid percolate. Also, the digestate from the top and middle sections of the digester had similar diversity, whereas the digestate from the bottom of the tank had a slightly lower diversity. These results suggest that despite percolate recirculation, substrate gradients might have developed across the system. Archaeal communities showed shifts towards known hydrogenotrophic and ammonia-tolerant methanogens (genera Methanocelleus, Methanolinea, Methanosarcina, vadin CA11, etc.), which was a consequence of decreased volatile fatty acids and increased ammonia-nitrogen levels over time. Compared to initial solid and liquid inoculum, the relative abundances of some bacteria (phyla Proteobacteria and Firmicutes) and archaea of the genus Methanosarcina changed between two phases in the opposite direction, indicating a shift of microbes between two phases.

Effects of the Application of Lactobacillus plantarum Inoculant and Potassium Sorbate on the Fermentation Quality, In Vitro Digestibility and Aerobic Stability of Total Mixed Ration Silage Based on Alfalfa Silage

Simple Summary

Ensiling total mixed ration allows preservation and saves labor for small farms. This study evaluated the substitution relationship between lactic acid bacteria (Lactobacillus plantarum) and silage components, and verified the practicality of preservative (potassium sorbate) in total mixed ration silage. The results showed that potassium sorbate greatly improved the preservation efficiency of total mixed ration silages. The alfalfa silage could directly produce an acidic environment for fresh total mixed ration before ensiling and showed comparable function to inoculant in the improvement of fermentation quality. Therefore, the application of the inoculant is not necessary when the total mixed ration contains a certain percentage of silage. These findings could provide guidance for farmers to avoid the blind use of inoculants and the spoilage of total mixed ration silage, which could directly improve economic efficiency.

Abstract

This study aimed to evaluate the effect of the application of an inoculant and a preservative on the fermentation quality, in vitro digestibility, and aerobic stability of alfalfa silage-based fermented total mixed ration (TMR). The TMR was ensiled with (1) no additives (control), (2) Lactobacillus plantarum (LP), or (3) potassium sorbate (PS). The V-scores of all silages were higher than 80 points during the 30 days of ensiling. The addition of LP and PS had no effects on the in vitro parameters, such as in vitro digestibility and in vitro gas production (p > 0.05). LP-treated silage showed similar fermentation quality and comparable aerobic stability to the control (110 h). The LP only decreased the ammonia nitrogen (NH₃-N) content (p < 0.05) during ensiling. The PS significantly increased the pH of TMR silages (p < 0.05). Meanwhile, the addition of PS improved the aerobic stability (>162 h) of TMR silage, indicated by the higher water-soluble carbohydrate content and lower NH₃-N content in comparison with those in the control after aerobic exposure (p < 0.05). The improvement in fermentation quality is extremely small in terms of applying LP in TMR silage based on a large percentage of other silage ingredients. The PS is effective in conserving unpacked TMR silage and showed the potential to reduce the risk of ruminal acidosis in livestock.

Dry anaerobic digestion of organic waste: A review of operational parameters and their impact on process performance

Dry digestion is a suitable technology for treating organic wastes with varying composition such as the organic fraction of municipal solids waste. Yet, there is a need for further research to overcome some of the disadvantages associated with the high total solids content of the process. Optimisation of inoculum to substrate ratio, feedstock composition and size, liquid recirculation, bed compaction and use of bulking agents are some of the parameters that need further investigation in batch dry anaerobic digestion, to limit localised inhibition effects and avoid process instability. In addition, further attention on the relation between feedstock composition, organic loading rate and mixing regimes is required for continuous dry anaerobic digestion systems. This paper highlights all the areas where knowledge is scarce and value can be added to increase dry anaerobic digestion performance and expansion.

An improved hydrodynamic model for percolation and drainage dynamics for household and agricultural waste beds

This study focuses on the hydrodynamic modelling of percolation and drainage cycles in the context of solid-state anaerobic digestion and fermentation (VFA platform) of household solid wastes (HSW) in leach bed reactors. Attention was given to the characterization of the water distribution and hydrodynamic properties of the beds. The experimental procedure enabled the measurement of water content in waste beds at different states of compaction during injection and drainage, and this for two types of HSW and for two other type of wastes. A numerical model, set up with experimental data from water content measurements, highlighted that a capillary-free dual-porosity model was not able to correctly reproduce all the hydrodynamic features and particularly the drainage dynamics. The model was improved by adding a reservoir water fraction to macroporosity which allowed to correctly simulate dynamics. This model, validated with data obtained from agricultural wastes, enabled to explain more precisely the water behaviour during percolation processes and these results should be useful for driving either solid-state anaerobic digestion or fermentation reactors. Indeed, this implies that the recirculation regime will impact the renewal of the immobile water fraction in macroporosity, inducing different concentration levels of fermentation products in the leachate.

Dry anaerobic co-digestion of roadside grass and cattle manure at a 60 L batch pilot scale

Roadside grass cuttings and solid cattle manure are resources that are available as input for dry anaerobic co-digestion. Two series of measurements were carried out, one in June 2016 and one in October 2016. The methane potentials were determined on a laboratory scale and revealed a high degree of seasonality, 202.9 and 167.9 Nm³_CH4.t_VS^-1, respectively. Moreover, these substrates were co-digested in reactors by the dry process on a pilot scale (60 L). Two strategies for filling and optimization, as layers or as a mixture, were compared. The seasonality also determined the physicochemical parameters and the hydrodynamic properties involved in percolation of the liquid phase recirculated in the dry digestion process. The production of methane depended on the filling method, the seasonality, and the nature of the input, which in some cases resulted in inhibition of 34.8-44.4 Nm³_CH4.t_VS^-1.

Comparison of leachate percolation and immersion using different inoculation strategies in thermophilic solid-state anaerobic digestion of pig urine and rice straw

Heterogeneous distribution of substrate and microorganisms and low mass transfer limit methane production dramatically in solid-state anaerobic digestion (SS-AD). To overcome this challenge, this study determined the optimal inoculation strategy (complete premix/slurry application) for reusing solid digestate as inoculum and the optimal leachate circulation method (percolation/immersion) using batch digestion. Initially, percolation and immersion (1 h per 3 days) were compared and the result shows that immersing rice straw into leachate was superior to leachate percolation in methane production. Effect of the immersion period (24, 48 and 72 h) in each circulation cycle on methane production was then evaluated for each inoculation strategy. Methane production increased until the immersion period up to 24 h and then decreased, while the average cumulative methane yield with an immersion period of 24 h was (180 mL/g volatile solids). Slurry application with an immersion period 24 h is recommended as the optimum operating condition.

A novel spatiotemporally anaerobic/semi-aerobic bioreactor for domestic solid waste treatment in rural areas

To meet the requirements of domestic solid waste treatment and technological upgrading of bioreactors, a spatiotemporally anaerobic/semi-aerobic bioreactor (STASAB) was designed. The STASAB took full advantages of anaerobic and semi-aerobic bioreactors by the sequential alternation of anaerobic and semi-aerobic operation and by recirculation of mixed leachate from different-stage bioreactors. Results indicated that after the start-up stage, the pH of leachate in the STASAB always remained higher than 6.88, even in the hydrolysis and acidogenesis stage. The maximum total nitrogen concentration in the STASAB was 1461 mg·L^-1, which was merely half that of the sequentially anaerobic/semi-aerobic bioreactor (SASAB) and had no adverse effects on the anaerobic process. Nitrogen removal in the STASAB reached 92.3%-95.5% when operated in the semi-aerobic phase and even reached 49.4% when operated in the anaerobic phase. The peak concentration of chemical oxygen demand was much lower and the anaerobic digestion lag time was much shorter in the STASAB than in the SASAB. The period of rapid biogas production in the STASAB was double that of the SASAB, which resulted in a 70% increase in biogas generation. Moreover, leachate could be exhausted by evaporation in just 3-5 months during the semi-aerobic phase. Therefore, the STASAB can eliminate acidogenic and ammonia inhibition during solid waste treatment, enhance the rate and extent of organic waste decomposition, rapidly initiate methanogenesis, enhance methane generation, and achieve zero leachate discharge (excluding rainfall infiltration). The STASAB is an efficient and feasible technique for treating domestic solid waste in rural areas.

Effect of Aerobic Hydrolysis on Anaerobic Fermentation Characteristics of Various Parts of Corn Stover and the Scum Layer

To solve the difficulty of lignocellulose hydrolysis and the formation of crusted scum in anaerobic fermentation, various parts of corn stover, i.e., pith, rind and leaf, were subjected to a two-phase processing including aerobic hydrolysis (AH) and anaerobic fermentation. The results showed that AH significantly broke down the lignin structure of the various components of corn stover and increased the rate of lignin degradation. After 16 h of AH, the lignin degradation rates of the pith, rind and leaf were 4.20%, 3.91% and 4.90%, respectively, and the acetic acid produced accounted for more than 60% of the total amount of volatile fatty acids (VFAs) and ethanol. After hydrolyzing the pith and rind for 12 h and the leaf for 8 h, the maximum methane yields of fresh mass volatile solid (VS) were 323 ml g-1, 251 ml g-1 and 264 ml g-1, respectively, which were increased by 35.02%, 30.05% and 8%, respectively, while the fermentation cycle of T90 (90% of the total gas production) was shortened by 4-5 days. After hydrolyzing the rind and leaf for 12 h and the pith for 16 h, the thicknesses of the scum layer were only 7.1%, 13.6% and 18%, respectively, of that of the untreated group, indicating that AH coupled with anaerobic fermentation can effectively degrade lignin, reduce the thickness of the scum layer and increase the methane yield.

Leachate Recirculation for Enhancing Methane Generation within Field Site in China

Leachate recirculation is a critical element in the evaluation of the availability of methane production enhancement in bioreactor landfills. Field experiments in leachate injection were conducted in horizontal wells at a landfill in Hubei Province in China. The experiments included the long-term test of methane concentration and production in three cells; the test was operated with nonrecirculation (NR), continued recirculation (CR), and descending recirculation (DR). The average methane concentration in CR is 54.8%, which is higher than that in the NR and DR sites. The average biogas flow rate in the CR site was 2.2 times that in the NR site. The recirculation loading should be determined with the specific conditions, to effectively improve the methane production in field site. The position of the gas collection well was also very important, coordinating with the distribution of the leachate injection well and influence area of the liquid injection. The long-term monitoring of injection volume and gas production is essential to determine the reliability of recirculation for methane reuse.

Influence of operations on leachate characteristics in the Aerobic-Anaerobic Landfill Method

Landfill aeration is an effective technique for the controlled and sustainable conversion of conventional anaerobic landfills into a biologically stabilized state associated with a significantly lowered or the near elimination of the landfill gas emission potential. For in-situ leachate treatment recycling back the generated leachate in the bioreactor is also a promising technique for reducing pollutants and cost of ex-situ treatment as well. This research has been conducted to ascertain the in-situ treatment of leachate in Aerobic Anaerobic Landfill Method (AALM) compared with aerobic landfill and evaluated the impacts of various leachate recirculation regimes on MSW degradation and to provide data for successful operation in landfill sites. The experiment was conducted using six Plexiglass® landfill simulation reactors with a height of 100 cm and a diameter of 15 cm. Air was injected at the rates of 1.6 l/kg DM/h (Low aeration rate) for reactors R-LA, R-LAA (recirculatory) and LAA (non-recirculatory) and 4.8 l/kg DM/h (High aeration rate) in R-HA, R-HAA (recirculatory), and HAA (non-recirculatory) until day 242. It has been evaluated that R-HAA at high aeration rate achieved higher leachate quantity reduction (36.9%) than low aeration rate reactor R-LAA (19.6%) and AALM provides a better solution to control the temperature within the landfill body. The final NH₄⁺-N concentration in R-HA (214.5 mg/l) was eight times lower than in the R-LA (1741.0 mg/l) reactor, and R-HAA (842.5 mg/l) was about three times lower than R-LAA (2315.4 mg/l) reactor on day 242. The change in leachate recirculation amount at varying moisture content positively affected the stabilization process and in-situ leachate treatment efficiency. The combination of both technologies (intermittent aeration and leachate recirculation) is a feasible way for in-situ leachate treatment, decrease the cost of further ex-situ leachate treatment as well as a viable and cost-saving alternative to continuous aeration.

Solid anaerobic digestion: State-of-art, scientific and technological hurdles

In this paper, a state-of-art about solid anaerobic digestion (AD), focused on recent progress and trends of research is proposed. Solid anaerobic digestion should be the most appropriate process for degradation of by-products with high total solid (TS) content, especially lignocellulosic materials like agricultural waste (straw, manure), household waste and food waste. Solid AD is already widely used in waste water treatment plant for treating plant for sewage sludge but could be more developed for lignocellulosic materials with high TS content. Many research works were carried out in Europe on solid AD, focused on current hurdles (BMP, codigestion, inhibition, microbial population, rheology, water transfers, inoculum, etc.) in order to optimize the solid AD process. In conclusion, hurdles of solid AD process should and must be solved in order to propose better productivity and profitability of such system operating with high TS content (>15%), favouring reliable industrial processes.

A comparative study on the process efficiencies and microbial community structures of six full-scale wet and semi-dry anaerobic digesters treating food wastes

The purpose of this study was to investigate the effect of different types of food wastes on the process efficiency and microbial community structures in full-scale anaerobic digesters and to identify parameters that affect these criteria. Six full-scale anaerobic digesters were investigated; three were operated under "wet" condition (total solids TS≤10%), and three were run under "semi-dry" condition (10%≤TS≤20%). Removal efficiency of volatile solids was much higher in the wet digesters (75.2±3.8%) than in the semi-dry digesters (42.6±5.5%). The bacterial and archaeal communities were distinctly characterized by families Porphyromonadaceae, Sphingobacteriaceae, Syntrophomonadaceae, and Methanobacteriaceae in the wet digesters; and of Clostridiaceae, Patulibacteraceae, Pseudonocardiaceae, Lachnospiraceae, Rikenellaceae, and Methanomicrobiaceae in the semi-dry digesters. The discriminant parameters identified were TS content of influent, concentration of total ammonia nitrogen and the ratio of soluble chemical oxygen demand (COD) to COD in the digester.

Industrial scale garage-type dry fermentation of municipal solid waste to biogas

The objectives of this study was to through monitoring the 1st industrial scale garage-type dry fermentation (GTDF) MSW biogas plant in Bin County, Harbin City, Heilongjiang Province, China, to investigate its anaerobic digestion (AD) performance and the stability of process. After a monitoring period of 180days, the results showed that the volumetric biogas production of the digesters and percolate tank was 0.72 and 2.22m(3) (m(3)d)(-1), respectively, and the specific biogas yield of the feedstock was about 270m(3)CH4tVS(-1), which indicated that the GTDF is appropriate for the Chinese MSW. This paper also raised some problems aimed at improving the process stability and AD efficiency.

Dynamic effect of leachate recirculation on batch mode solid state anaerobic digestion: Influence of recirculated volume, leachate to substrate ratio and recirculation periodicity

Performances of batch mode solid state anaerobic digestion (SSAD) were investigated through several leachate recirculation strategies. Three parameters were shown to particularly influence methane production rates (MPR) and methane yields: the length of the interval between two recirculation events, the leachate to substrate (L:S) ratio and the volume of leachate recirculated. A central composite factor design was used to determine the influence of each parameter on methane production. Results showed that lengthening the interval between two recirculation events reduced methane yield. This effect can be counteracted by recirculating a large volume of leachate at a low L:S ratio. Steady methane production can be obtained by recirculating small amounts of leachate, and by lengthening the interval between two recirculations, regardless of the L:S ratio. However, several combinations of these parameters led to similar performances meaning that leachate recirculation practices can be modified as required by the specific constraints SSAD plants configurations.

Gravimetric water distribution assessment from geoelectrical methods (ERT and EMI) in municipal solid waste landfill

The gravimetric water content of the waste material is a key parameter in waste biodegradation. Previous studies suggest a correlation between changes in water content and modification of electrical resistivity. This study, based on field work in Mont-Saint-Guibert landfill (Belgium), aimed, on one hand, at characterizing the relationship between gravimetric water content and electrical resistivity and on the other hand, at assessing geoelectrical methods as tools to characterize the gravimetric water distribution in a landfill. Using excavated waste samples obtained after drilling, we investigated the influences of the temperature, the liquid phase conductivity, the compaction and the water content on the electrical resistivity. Our results demonstrate that Archie's law and Campbell's law accurately describe these relationships in municipal solid waste (MSW). Next, we conducted a geophysical survey in situ using two techniques: borehole electromagnetics (EM) and electrical resistivity tomography (ERT). First, in order to validate the use of EM, EM values obtained in situ were compared to electrical resistivity of excavated waste samples from corresponding depths. The petrophysical laws were used to account for the change of environmental parameters (temperature and compaction). A rather good correlation was obtained between direct measurement on waste samples and borehole electromagnetic data. Second, ERT and EM were used to acquire a spatial distribution of the electrical resistivity. Then, using the petrophysical laws, this information was used to estimate the water content distribution. In summary, our results demonstrate that geoelectrical methods represent a pertinent approach to characterize spatial distribution of water content in municipal landfills when properly interpreted using ground truth data. These methods might therefore prove to be valuable tools in waste biodegradation optimization projects.

Flow cytometry community fingerprinting and amplicon sequencing for the assessment of landfill leachate cellulolytic bioaugmentation

Flow cytometry (FCM) is a high throughput single cell technology that is actually becoming widely used for studying phenotypic and genotypic diversity among microbial communities. This technology is considered in this work for the assessment of a bioaugmentation treatment in order to enhance cellulolytic potential of landfill leachate. The experimental results reveal the relevant increase of leachate cellulolytic potential due to bioaugmentation. Cytometric monitoring of microbial dynamics along these assays is then realized. The flow FP package is used to establish microbial samples fingerprint from initial 2D cytometry histograms. This procedure allows highlighting microbial communities' variation along the assays. Cytometric and 16S rRNA gene sequencing fingerprinting methods are then compared. The two approaches give same evidence about microbial dynamics throughout digestion assay. There are however a lack of significant correlation between cytometric and amplicon sequencing fingerprint at genus or species level. Same phenotypical profiles of microbiota during assays matched to several 16S rRNA gene sequencing ones. Flow cytometry fingerprinting can thus be considered as a promising routine on-site method suitable for the detection of stability/variation/disturbance of complex microbial communities involved in bioprocesses.

The impact of compaction and leachate recirculation on waste degradation in simulated landfills

This study investigated the impact of compaction and leachate recirculation on anaerobic degradation of municipal solid waste (MSW) at different methane formation phases. Two stainless steel lysimeters, C1 and C2, were constructed by equipping a hydraulic cylinder to apply pressure load (42kPs) on the MSW. When MSW started to produce methane, C1 was compacted, but C2 was compacted when the methane production rate declined from the peak generation rate. Methane production of C1was inhibited by the compaction and resulted in producing a total of 106L methane (44L/kgVS). However, the compaction in C2 promoted MSW degradation resulting in producing a total of 298L methane (125L/kgVS). The concentrations of volatile fatty acids and chemical oxygen demand showed temporary increases, when pressure load was applied. It was considered that the increased substrate accessibility within MSW by compaction could cause either the inhibition or the enhancement of methane production, depending the tolerability of methanogens on the acidic inhibition. Leachate recirculation also gave positive effects on methane generation from wet waste in the decelerated methanogenic phase by increasing mass transfer and the concentrations of volatile fatty acids.

Effects of concentrated leachate injection modes on stabilization of landfilled waste

Injection of concentrated leachate to landfills is a simple and cost-effective technology for concentrated leachate treatment. In this study, the effects of injection mode of concentrated leachate and its hydraulic loading rate on the stabilization of landfilled waste were investigated. Compared with the injection of concentrated leachate, the joint injection of leachate and concentrated leachate (1:1, v/v) was more beneficial to the degradation of landfilled waste and mitigated the discharge amount of pollutants at the hydraulic loading rate of 5.9 L m(-2) day(-1). As the hydraulic loading rate of the joint injection of leachate and concentrated leachate was increased from 5.9 to 17.6 L m(-2) day(-1), the organic matter, biologically degradable matter, and total nitrogen of landfilled waste were degraded more rapidly, with the degradation constant of the first-order kinetics of 0.005, 0.004, and 0.003, respectively. Additionally, NO2(-)-N and NO3(-)-N in the concentrated leachate could be well removed in the landfill bioreactors. These results showed that a joint injection of concentrated leachate and raw leachate might be a good way to relieve the inhibitory effect of high concentrations of toxic pollutants in the concentrated leachate and accelerate the stabilization of landfilled waste.

Biotic and abiotic roles of leachate recirculation in batch mode solid-state anaerobic digestion of cattle manure

Solid state anaerobic digestion, with leachate recirculation, is suitable for exploiting manure with a high solid content. The biotic and abiotic effects of the leachates were studied in lab-scale leach bed reactors (LBRs). LBRs were fed with cow manure and four leachates either biologically active or inert. The biotic impact of leachate was assessed by monitoring the microbial communities in the manure and in the leachates. LBRs with biologically active leachates, regardless to their origin, produced equivalent methane volumes (114.52±19.05 and 99.79±6.4NL/kgVS) while LBRs with inert leachates produced half less methane (60.22±5.71 and 58.87±13.2NL/kgVS) attesting to the biotic role of leachate. Moreover, its beneficial abiotic role is mainly due to its initial nutrient content, pH, and buffering capacity. The microbial community in the manure was strongly involved in methane production, and no transfer of microorganisms from the liquid phase was found (p<0.05).

Quantifying physical structure changes and non-uniform water flow in cattle manure during dry anaerobic digestion process at lab scale: Implication for biogas production

The aim of this study was to investigate and quantify non-uniform water flow during dry AD and its implication for biogas production. Laboratory tracer experiments were performed on cattle manure over the course of AD. The evolution of the permeability, the dry bulk density, the dry porosity, the total and volatile solid contents of cattle manure at different stages of AD, revealed waste structure changes, impacting water flow and methane production. Tracer experiments and numerical modeling performed by using a physical non-equilibrium model indicated non-uniform preferential flow patterns during degradation. According to literature, the increase of inoculum recirculation frequency improved methane production rate. However, these results demonstrated that this improvement occurs only at the beginning of manure degradation. After 19 days of degradation the inoculum recirculation and the flow patterns modification had no effect on methane production rate.

Assessment of percolation through a solid leach bed in dry batch anaerobic digestion processes

This work aimed at assessing water percolation through a solid cow manure leach bed in dry batch AD processes. A laboratory-scale percolation column and an experimental methodology were set up. Water behaviour was modelled by a double porosity medium approach. An experimental procedure was proposed to determine the main hydrodynamic parameters of the multiphase flow model: the porosity, the permeability and the term for water exchange from macro- to micro-porosity. Micro- and macro-porosity values ranged from 0.42 to 0.70 m(3) m(-3) and 0.18 to 0.50 m(3) m(-3). Intrinsic permeability values for solid cow manure ranged from 5.55·10(-11) to 4.75·10(-9) m(2). The term for water exchange was computed using a 2nd order model. The CFD tool developed was used to simulate successive percolation and drainage operations. These results will be used to design leachate recirculation strategies and predict biogas production in full-scale dry AD batch processes.

Assessment of methane biodegradation kinetics in two-phase partitioning bioreactors by pulse respirometry

Biological methane biodegradation is a promising treatment alternative when the methane produced in waste management facilities cannot be used for energy generation. Two-phase partitioning bioreactors (TPPBs), provided with a non-aqueous phase (NAP) with high affinity for the target pollutant, are particularly suitable for the treatment of poorly water-soluble compounds such as methane. Nevertheless, little is known about the influence of the presence of the NAP on the resulting biodegradation kinetics in TPPBs. In this study, an experimental framework based on the in situ pulse respirometry technique was developed to assess the impact of NAP addition on the methane biodegradation kinetics using Methylosinus sporium as a model methane-degrading microorganism. A comprehensive mass transfer characterization was performed in order to avoid mass transfer limiting scenarios and ensure a correct kinetic parameter characterization. The presence of the NAP mediated significant changes in the apparent kinetic parameters of M. sporium during methane biodegradation, with variations of 60, 120, and 150% in the maximum oxygen uptake rate, half-saturation constant and maximum specific growth rate, respectively, compared with the intrinsic kinetic parameters retrieved from a control without NAP. These significant changes in the kinetic parameters mediated by the NAP must be considered for the design, operation and modeling of TPPBs devoted to air pollution control.

Pilot-scale nitrogen removal from leachate by ex situ nitrification and in situ denitrification in a landfill bioreactor

A combined process consisting of ex situ nitrification and in situ denitrification in landfill refuse was studied in pilot scale for nitrogen removal from municipal landfill leachate. The results showed that above 80% of partial nitrification ratio and an average COD loading rate of 1.50 kg m(-3) d(-1) were steadily maintained under DO concentrations of 1.0-1.7 mg L(-1) in the aerobic reactor. Quantitative PCR results indicated that nitrite-oxidizing bacteria being sensitive to DO fluctuations lead to partial nitrification when free ammonia inhibition was weak. Nitrified landfill leachate could be denitrified in the landfill bioreactor with maximum total oxidizing nitrogen removal rate of 67.2 g N t(-1) TSwaste d(-1). Clone and sequencing analysis of denitrifying bacterial nirS gene inferred that heterotrophic denitrifier Azoarcus tolulyticu was the primary nitrogen converter in the landfill bioreactor. The obtained results will provide valuable information for optimizing the design and operation of a landfill bioreactor.

A new computational control strategy for leachate management in bioreactor landfills

A novel computational measurement-based control strategy (CMCS) was developed to manage leachate recirculation based on monitoring ofkey system parameters. The proposed framework identifies the operational phase ofthe controlled bioreactor, and accordingly determines quantities ofleachate, buffer, supplemental water, and nutritional amendments required to provide the temporally changing landfill microbial consortia with their growth requirements. The CMCS was tested in a pilot-scale bioreactor cell (0.5 m3) for a period of nine months, and compared to a conventional open-loop leachate control scheme (fixed recirculation rate of produced leachate) in an identical cell. Overall, positive results confirmed the applicability and benefits of the control strategy to optimize the leachate recirculation and manipulation processes. Throughout the 21 operational cycles of the controlled bioreactor cell, the maximum specific daily recirculation volume (24 L/t/d) was sixfold the minimum volume determined. The amounts of inoculum/nutrient, buffer, and supplemental water were also computed cyclically, and ranged between 2% and 11%, 1% and 9%, and 3% and 16% of the total volume recycled, respectively. The recirculated volumes of leachate and other amendments were highly variable, and did not follow any predictable trends. In general, CMCS achieved proper control with a minimal use of resources, e.g. it utilized about 55% less buffer compared with the leachate neutralization practice commonly used in lab- and pilot-scale studies. The greater degradation rates of organic matter combined with relative increases in biogas production (1.7-fold greater) demonstrate that calculation-based recirculation stimulated the methanogenic activity and accelerated the bioreactor evolution.

Stabilisation of biodried municipal solid waste fine fraction in landfill bioreactor

The biodrying process of solid waste is a pre-treatment for the bio-stabilisation of the municipal solid waste. This study aims to investigate the fate of the municipal solid waste fine fraction (MSWFF) resulting from a biodrying treatment when disposed in landfills that are operated as bioreactors. Biodried MSWFF was apparently stable due to its low moisture content that slows down the microbial activity. The lab-scale anaerobic bioreactors demonstrated that a proper moisture content leads to a complete biodegradation of the organic matter contained in the biodried MSWFF. Using a pilot-scale landfill bioreactor (LBR), MSWFF stabilisation was achieved, suggesting that the leachate recirculation could be an effective approach to accomplish the anaerobic biodegradation and biostabilisation of biodried MSWFF after landfilling. The biostabilisation of the material resulting from the LBR treatment was confirmed using anaerobic and aerobic stability indices. All anaerobic and aerobic indices showed a stability increase of approximately 80% of the MSWFF after treatment in the LBR. The similar values of OD7 and BMP stability indices well agree with the relationship between the aerobic and anaerobic indices reported in literature.

Enhancement of methane production and bio-stabilisation of municipal solid waste in anaerobic bioreactor landfill

The aim of the experiment was to enhance biodegradation and methane production of municipal solid waste (MSW). Two groups of simulated anaerobic bioreactor landfill were used; one group of mixed MSW with three bioreactors (R1, R2 and R3) and second group was compostable MSW with two bioreactors (R4 and R5). The different combinations of operational parameters were aeration with addition of aerobic microbial culture, anaerobic sludge, coarse gravel mixing, intermediate soil cover and varied leachate recirculation rate. The results observed at the end of 270days prevail that the process combination of above operational parameters adopted in compostable MSW bioreactor was more efficient approach for stabilization of MSW. It has accelerated the methane production rate (141.28Lkg(-1)dry waste) by 25%. It was also observed that the degradation time of MSW was reduced by 25% compared to maximum values quoted in the literature. The nonlinear regression of the cumulative biogas production and digestion time shows that Gompertz growth equation fits the results well.

Inhibitory effects of Cu (II) on fermentative methane production using bamboo wastewater as substrate

The toxic effects of Cu (II) present in bamboo industry wastewater (BIWW) upon its anaerobic biodegradability of organic content were investigated. The analysis through the Modified Gompertz model indicated that the optimum chemical oxygen demand (COD) concentration for digestion was 22,780 mg L(-1) with a maximum R(m) (maximum CH(4) production rate) value of 2.8 mL h(-1), corresponding to a specific methanogenic activity (SMA) of 2.38 mL CH(4) g VSS(-1)h(-1). The inhibitory effects of Cu (II) on cumulative methane production depended on its concentration and contact time. Low concentrations (5 mg L(-1)) of Cu (II) showed a stimulating effect on methanogenesis. Methane was not detected when the Cu (II) concentration was increased beyond 300 mg L(-1). The IC(50) value of Cu (II), the Cu (II) concentration that causes a 50% reduction in the cumulative methane production, was 18.32 mg L(-1) (15.9 mg Cu(II) gVSS(-1)).

Evaluation of the biological stability of waste during landfill stabilization by thermogravimetric analysis and Fourier transform infrared spectroscopy

This study seeks to assess the biological stability of landfilled municipal solid waste (MSW) based on the changes in organic matter, as revealed by thermogravimetric analysis and Fourier transform infrared (FTIR) spectroscopy. Derivate thermogravimetry profiles (DTG) showed a reduction in peak intensity at 200-350 °C (DTG2), while an increase in peak intensity and a shift towards higher temperature at 400-600 °C (DTG3). The decrease in the peak intensity of the aliphatic methylene at 2920 and 2850 cm(-1), and the increase of aromatic substances and polysaccharide at 1640 cm(-1) in the FTIR spectra also confirm the changes. Well-fitted correlations of the peak intensity ratio (2920/1640) and peak area ratio (DTG2/DTG3) to C/N ratio were also established, confirming that the 2920/1640 and the DTG2/DTG3 ratios can be considered as reliable parameters for tracking the biological stability of MSW during landfill stabilization.

Enhanced methane recovery by food waste leachate injection into a landfill in Korea

The current food waste leachate (FWL) disposal practice in Korea warrants urgent attention and necessary action to develop an innovative and sustainable disposal strategy, which is both environmentally friendly and economically beneficial. In this study, methane production by FWL injection into a municipal solid waste landfill with landfill gas (LFG) recovery facility was evaluated for a period of more than 4 months. With the target of recovering LFG with methane content ~50%, optimum LFG extraction rate was decided by a trial and error approach during the field investigation in five different phases. The results showed that, upon FWL injection, LFG extraction rate of ~20 m(3)/h was reasonable to recover LFG with methane content ~58%. Considering the estimated methane production potential of 31.7 m(3) CH(4) per ton of FWL, methane recovery from the landfill was enhanced by 14%. The scientific findings of this short-term investigation indicates that FWL can be injected into the existing sanitary landfills to tackle the present issue and such landfills with efficient liner and gas collection facility can be utilized as absolute and sustainable environmental infrastructures.

Effect of layers composition on leachate property from functional layer embedded landfill

Two functional layers embedded landfills (FLELs), namely LR1 (with Layers 1 and 2) and LR2 (with double Layer 1), were conducted to evaluate their efficiency on the reduction of leachate strength at source and the acceleration of waste biodegradation process. It was found that the cumulative COD, NH(3)-N, leachate quantity and landfill settlement in LR1 was 63.0%, 34.6%, 94.8% and 80.4% of that in LR2 in the entire test periods, while the leachate effluents from these two reactors presented almost the same concentration at the end of the operation period. It could be concluded that leachate pollutants was removed immediately in Layer 2 through the physical-chemical reaction, while double Layer 1s contributed to the pollutant removal in a long run through the improvement of the micro-organism activities in landfill. The layer composition should be applied according to the landfill types, i.e. plain landfill using Layer 2 and valley landfill using Layer 1.

Source reduction of the landfill leachate strength in a functional layer embedded landfill (FLEL)

In order to reduce the leachate strength from landfill at source, a novel landfill, functional layer embedded landfill, was developed through the introduction of the functional layers, and a comparative study was conducted between the functional layer embedded landfill (FLEL, R1) and the conventional landfill (CL, R2). It was found that the pollutant in leachate effluent from R1 was 20-50%, 14-43% and 33-75% of that from R2, in terms of COD, TN and NH(3)-N. The cumulative movement of waste settlement was about 16.4 and 13.1cm in R1 and R2 under the test period of 1 years, resulting in 13.7% and 10.9% of the original landfill height. Therefore, FLEL could save the land area and the cost of the leachate treatment process due to the reduction of leachate strength, and more waste could be disposed in landfill through the acceleration of the MSW degradation process, comparing to the CL.

Influence of substrate concentration and moisture content on the specific methanogenic activity of dry mesophilic municipal solid waste digestate spiked with propionate

The objective of this study was to evaluate the influence of substrate concentration and moisture content on the specific methanogenic activity (SMA) of a fresh dry mesophilic digestate from a municipal solid waste digester plant. For this purpose, SMA tests were performed under mesophilic conditions into glass bottles of 500 mL volume used as batch reactors, during a period of 20-25 days. Propionate was used as substrate at concentrations ranging from 1 to 10 gCOD/kg. Four moisture contents were studied: 65%, 75%, 80% and 82%. Experimental results showed that propionate concentration and moisture content strongly influenced the SMA. The highest SMA was observed at a substrate concentration of 10 gCOD/kg (11.3 mgCOD gVS(-1) d(-1) for the second dose of propionate) and at a moisture content of 82% (7.8 mgCOD gVS(-1) d(-1) for the second dose of propionate, at a concentration of 5 gCOD/kg). SMA was found to decrease linearly when decreasing the moisture content.

Influence of substrate concentration and moisture content on the specific methanogenic activity of dry mesophilic municipal solid waste digestate spiked with propionate

The objective of this study was to evaluate the influence of substrate concentration and moisture content on the specific methanogenic activity (SMA) of a fresh dry mesophilic digestate from a municipal solid waste digester plant. For this purpose, SMA tests were performed under mesophilic conditions into glass bottles of 500 mL volume used as batch reactors, during a period of 20-25 days. Propionate was used as substrate at concentrations ranging from 1 to 10 gCOD/kg. Four moisture contents were studied: 65%, 75%, 80% and 82%. Experimental results showed that propionate concentration and moisture content strongly influenced the SMA. The highest SMA was observed at a substrate concentration of 10 gCOD/kg (11.3 mgCOD gVS(-1) d(-1) for the second dose of propionate) and at a moisture content of 82% (7.8 mgCOD gVS(-1) d(-1) for the second dose of propionate, at a concentration of 5 gCOD/kg). SMA was found to decrease linearly when decreasing the moisture content.

Decoupling MSW settlement into mechanical and biochemical processes--modelling and validation on large-scale setups

Forecasting settlements of non-hazardous waste is essential to ensure the integrity and durability of landfill covers over time. Over a short time span, the survey of settlements may also contribute to the investigation of the biodegradation processes. This paper addresses secondary settlements of Municipal Solid Waste (MSW), a heterogeneous and time-evolving material. An analysis of available experimental data from different pilots and the literature was conducted to quantify the influence of biodegradation on MSW secondary settlements. After making assumptions about the various features of the waste and their constitutive relationships, a one-dimensional biomechanical model to predict the secondary settlement has been developed. The determination of the total secondary settlement was obtained by the addition of two separate parts, the mechanical settlement, due to creep, and the biochemical settlement, due to the degradation of the organic matter. The latter has been evaluated based on the observed biogas production. Using the data from different recent large-scale experiments that provide a monitoring of biogas production, a method for predicting the biochemically-induced settlements is proposed and validated on these tests. The relative contributions of mechanical and biochemical settlements are also calculated and discussed as a function of waste pre-treatment and operation conditions (biological pre-treatment, shredding, leachate injection). Finally, settlement may be considered as a relevant indicator for the state of biodegradation.