Syntrophic interactions drive the hydrogen production from glucose at low temperature in microbial electrolysis cells

Potential application of bioelectrochemical systems in cold environments

Globally, more than half of the world's regions and populations inhabit psychrophilic and seasonally cold environments. Lower temperatures can inhibit the metabolic activity of microorganisms, thereby restricting the application of traditional biological treatment technologies. Bioelectrochemical systems (BES), which combine electrochemistry and biocatalysis, can enhance the resistance of microorganisms to unfavorable environments through electrical stimulation, thus showing promising applications in low-temperature environments. In this review, we focus on the potential application of BES in such environments, given the relatively limited research in this area due to temperature limitations. We select microbial fuel cells (MFC), microbial electrolytic cells (MEC), and microbial electrosynthesis cells (MES) as the objects of analysis and compare their operational mechanisms and application fields. MFC mainly utilizes the redox potential of microorganisms during substance metabolism to generate electricity, while MEC and MES promote the degradation of refractory substances by augmenting the electrode potential with an applied voltage. Subsequently, we summarize and discuss the application of these three types of BES in low-temperature environments. MFC can be employed for environmental remediation as well as for biosensors to monitor environmental quality, while MEC and MES are primarily intended for hydrogen and methane production. Additionally, we explore the influencing factors for the application of BES in low-temperature environments, including operational parameters, electrodes and membranes, external voltage, oxygen intervention, and reaction devices. Finally, the technical, economic, and environmental feasibility analyses reveal that the application of BES in low-temperature environments has great potential for development.

Dominant factors analyses and challenges of anaerobic digestion under cold environments

With the development of fermentation technology and the improvement of efficiency, anaerobic digestion (AD) has been playing an increasingly primary role in waste treatment and resource recovery. Temperature is undoubtedly the most important factor because it shapes microbial habitats, changes the composition of the microbial community structure, and even affects the expression of related functional genes. More than half of the biosphere is in a long-term or seasonal low-temperature environment (<20 °C), which makes psychrophilic AD have broad application prospects. Therefore, this review discusses the influencing factors and enhancement strategies of psychrophilic AD, which may provide a corresponding reference for future research on low-temperature fermentation. First, the occurrence of AD has been discussed. Then, the adaptation of microorganisms to the low-temperature environment was analyzed. Moreover, the challenges of psychrophilic AD have been reviewed. Meanwhile, the strategies for improving psychrophilic AD are presented. Further, from technology to application, the current situation of psychrophilic AD in pilot-scale tests is described. Finally, the economic and environmental feasibility of psychrophilic AD has been highlighted. In summary, psychrophilic AD is technically feasible, while economic analysis shows that the output benefits cannot fully cover the input costs, and the large-scale practical application of psychrophilic AD is still in its infancy. More research should focus on how to improve fermentation efficiency and reduce the investment cost of psychrophilic AD.

Responses of syntrophic microbial communities and their interactions with polystyrene nanoplastics in a microbial electrolysis cell

Microbial electrochemical technologies are promising for simultaneous energy recovery and wastewater treatment. Although the inhibitory effects of emerging pollutants, particularly micro/nanoplastics (MPs/NPs), on conventional wastewater systems have been extensively studied, the current understanding of their impact on microbial electrochemical systems is still quite limited. Microplastics are plastic particles ranging from 1 μm to 5 mm. However, nanoplastics are smaller plastic particles ranging from 1 to 100 nm. Due to their smaller size and greater surface area, they can penetrate deeper into biofilm structures and cell membranes, potentially disrupting their integrity and leading to changes in biofilm composition and function. This study first reports the impact of polystyrene nanoplastics (PsNPs) on syntrophic anode microbial communities in a microbial electrolysis cell. Low concentrations of PsNPs (50 and 250 μg/L) had a minimal impact on current density and hydrogen production. However, 500 μg/L of PsNPs decreased the maximum current density and specific hydrogen production rate by ∼43 % and ∼48 %, respectively. Exposure to PsNPs increased extracellular polymeric substance (EPS) levels, with a higher ratio of carbohydrates to proteins, suggesting a potential defense mechanism through EPS secretion. The downregulation of genes associated with extracellular electron transfer was observed at 500 μg/L of PsNPs. Furthermore, the detrimental impact of 500 μg/L PsNPs on the microbiome was evident from the decrease in 16S rRNA gene copies, microbial diversity, richness, and relative abundances of key electroactive and fermentative bacteria. For the first time, this study presents the inhibitory threshold of any NPs on syntrophic electroactive biofilms within a microbial electrochemical system.

Efficient hydrogen production in single-chamber microbial electrolysis cell with a fermentable substrate under hyperalkaline conditions

Hydrogen production from food waste is of great significance for energy conversion and pollution control. The aim of this study was to investigate the glucose fermentation from food waste and hydrogen (H2) production in the single-chamber microbial electrolysis cell (MEC) under hyperalkaline conditions. Single-chamber MECs were tested with 1 g/L glucose as substrate under different pH values (i.e., 7.0, 9.5, and 11.2) and applied voltages (i.e., 0.8, 1.2, and 1.6 V). With pH increase from 7.0 to 11.2, H2 production with methanogenesis inhibition was significantly improved in the MEC. At pH of 11.2, the maximum current density reached 180 ± 9 A/m3 with the H2 purity of 93.3 ± 1.2% and average H2 yield of 7.72 ± 0.23 mol H2/ mol glucose under 1.6 V. Acetate from glucose fermentation was the largest electron sink within 12 h. Methanobacterium alcaliphilum dominated the archaeal communities with the relative abundance of > 99.0% in the cathodic biofilms. The microbial communities and mcr A gene copy numbers analyses showed that high pH enhanced the acetate production from glucose fermentation, inhibited syntrophic acetate-oxidizing with hydrogenotrophic methanogenesis in the anodic biofilms, and inhibited hydrogenotrophic methanogenesis in the cathodic biofilms. Our results of hyperalkaline conditions provide a feasible way to harvest H2 efficiently from fermentable substrates in the single-chamber MEC.

Distinguishing anaerobic digestion from electrochemical anaerobic digestion: Metabolic pathways and the role of the microbial community

In this study, we explored why electrochemical anaerobic digestion (EAD) results in higher methane conversion and lower CO₂ emissions than anaerobic digestion (AD). Single-chamber AD and EAD reactors were used in this experiment, and the temperature was set as the disturbance factor. Current, pH, electrode potential, gas content, and microbial community were used as indicators for our analysis. Flux balance analysis (FBA) and high-pass next-generation sequencing (NGS) were used to explore the relationships between AD and EAD methane-producing metabolic fluxes and microorganisms. The results showed that the average methane fluxes were 22.27 (AD) and 29.65 (EAD). Compared with AD, EAD had improved hydrogen-dependent CO₂ reduction pathway. Trichloromonas was the dominant electricity-producing microorganism on the EAD anode film, which was closely related to the H₂ flux at the cathode. Oscillibacter and Syntrophomonas were the dominant bacteria in the fermentation broth, specific to EAD. The abundance of Oscillibacter was positively correlated with the H₂ flux, and the presence of Oscillibacter enhanced CO₂ reduction by hydrogen. Methanosaeta was the only dominant methanogenic bacterium in AD and EAD, and its abundance was higher in the experimental group with a greater methane flux.

Bioelectrochemical systems (BESs) for agro-food waste and wastewater treatment, and sustainable bioenergy-A review

Producing food by farming and subsequent food manufacturing are central to the world's food supply, accounting for more than half of all production. Production is, however, closely related to the creation of large amounts of organic wastes or byproducts (agro-food waste or wastewater) that negatively impact the environment and the climate. Global climate change mitigation is an urgent need that necessitates sustainable development. For that purpose, proper agro-food waste and wastewater management are essential, not only for waste reduction but also for resource optimization. To achieve sustainability in food production, biotechnology is considered as key factor since its continuous development and broad implementation will potentially benefit ecosystems by turning polluting waste into biodegradable materials; this will become more feasible and common as environmentally friendly industrial processes improve. Bioelectrochemical systems are a revitalized, promising biotechnology integrating microorganisms (or enzymes) with multifaceted applications. The technology can efficiently reduce waste and wastewater while recovering energy and chemicals, taking advantage of their biological elements' specific redox processes. In this review, a consolidated description of agro-food waste and wastewater and its remediation possibilities, using different bioelectrochemical-based systems is presented and discussed together with a critical view of the current and future potential applications.

A Review of Biohydrogen Production from Saccharina japonica

Saccharina japonica (known as Laminaria japonica or Phaeophyta japonica), one of the largest macroalgae, has been recognized as food and medicine for a long time in some Asian countries, such as China, South Korea, Japan, etc. In recent years, S. japonica has also been considered the most promising third-generation biofuel feedstock to replace fossil fuels, contributing to solving the challenges people face regarding energy and the environment. In particular, S. japonica-derived biohydrogen (H2) is expected to be a major fuel source in the future because of its clean, high-yield, and sustainable properties. Therefore, this review focuses on recent advances in bio-H2 production from S. japonica. The cutting-edge biological technologies with suitable operating parameters to enhance S. japonica’s bio-H2 production efficiency are reviewed based on the Scopus database. In addition, guidelines for future developments in this field are discussed.

Stimulating Anaerobic Degradation of Butyrate via Syntrophomonas wolfei and Geobacter sulfurreducens: Characteristics and Mechanism

Anaerobic digestion (AD) has been widely applied for the degradation of organic wastewater due to its advantages of high-load operation and energy recovery. However, some challenges, such as low treatment capacity and instability caused by the accumulation of volatile fatty acids, limit its further application. Here, S. wolfei and G. sulfurreducens were initially co-cultured in the anaerobic anode of bio-electrochemical system for degrading butyric acid. Butyrate degradation characteristics in different conditions were quantitatively described. Moreover, G. sulfurreducens simultaneously strengthened the consumption of H₂ and acetic acid via direct interspecies electron transfer, thereby strengthening the degradation of butyric acid via a co-metabolic process. During butyrate degradation, the co-culture of S. wolfei and G. sulfurreducens showed more advantages than that of S. wolfei and methanogens. This present study provides a new perspective of butyrate metabolism, which was independent of methanogens in an AD process.

Bacterial community structure of electrogenic biofilm developed on modified graphite anode in microbial fuel cell

Formation of electrogenic microbial biofilm on the electrode is critical for harvesting electrical power from wastewater in microbial biofuel cells (MFCs). Although the knowledge of bacterial community structures in the biofilm is vital for the rational design of MFC electrodes, an in-depth study on the subject is still awaiting. Herein, we attempt to address this issue by creating electrogenic biofilm on modified graphite anodes assembled in an air-cathode MFC. The modification was performed with reduced graphene oxide (rGO), polyaniline (PANI), and carbon nanotube (CNTs) separately. To accelerate the growth of the biofilm, soybean-potato composite (plant) powder was blended with these conductive materials during the fabrication of the anodes. The MFC fabricated with PANI-based anode delivered the current density of 324.2 mA cm-2, followed by CNTs (248.75 mA cm-2), rGO (193 mA cm-2), and blank (without coating) (151 mA cm-2) graphite electrodes. Likewise, the PANI-based anode supported a robust biofilm growth containing maximum bacterial cell densities with diverse shapes and sizes of the cells and broad metabolic functionality. The alpha diversity of the biofilm developed over the anode coated with PANI was the loftiest operational taxonomic unit (2058 OUT) and Shannon index (7.56), as disclosed from the high-throughput 16S rRNA sequence analysis. Further, within these taxonomic units, exoelectrogenic phyla comprising Proteobacteria, Firmicutes, and Bacteroidetes were maximum with their corresponding level (%) 45.5, 36.2, and 9.8. The relative abundance of Gammaproteobacteria, Clostridia, and Bacilli at the class level, while Pseudomonas, Clostridium, Enterococcus, and Bifidobacterium at the genus level were comparatively higher in the PANI-based anode.

Effects of ammonia on electrochemical active biofilm in microbial electrolysis cells for synthetic swine wastewater treatment

When facing wastewater with high organic and ammonia, e. g. swine wastewater, microbial electrolysis cell (MEC) is emerging for energy extraction as hydrogen and methane. However, the effects of highly concentrated ammonia on MEC haven't been fully evaluated. In this study, single-chamber MECs were operated with acetate and sucrose as substrates under various ammonia concentrations. The current generally increased with ammonia loading from 80 to 3000 mg L^-1. Yet, the substrate consumption in MECs was inhibited with ammonia concentrations above 1000 mg L^-1. As a combined result, the energy recovery efficiency of MECs was stable. The electrochemical activity of anode biofilm reached the peak under 1000 mg L^-1 ammonia and was restricted under higher ammonia loadings. Under neutral pH, the NH₄⁺ increases the cell membrane permeability, which benefited the electrochemical activity of exoelectrogens to a proper extent. Nevertheless, the toxic ammonia also accelerated the anode biomass loss and stimulated the extracellular polymeric substance (EPS) secretion. Due to the current increase, the abundance of exoelectrogens generally raised with ammonia loading from 80 to 3000 mg L^-1. However, except for anode biomass loss, the carbon and methane metabolism pathways were inhibited in acetate-fed MEC, while the glycolysis acted as the rate-limiting step for substrate degradation in sucrose-fed conditions. This study systematically examined the influences of high ammonia loading on MEC performances, bio-community and anode electrochemical activities, and evaluated practical feasibility and application inch of MECs for the energy recovery and pollutant removal of high concentration organic and ammonia wastewater.

Co, N co-doped hierarchical porous carbon as efficient cathode electrocatalyst and its impact on microbial community of anode biofilm in microbial fuel cell

The exploration of low-cost, long-term stable, and highly electrochemically active cathode catalysts is important for the practical application of microbial fuel cell (MFC). In this work, a series of the 3D hierarchical porous Co-N-C (3DHP Co-N-C) materials are designed and synthesized by a metal-organic framework ZIF-67 as a precursor and SiO₂ sphere of different sizes as the hard template. The 3DHP Co-N-C-2 with 129 nm macropore exhibits excellent ORR performance in 0.1 M KOH solution with a half-wave potential of 0.80 V vs. RHE and superior durability than Pt/C (20%) due to the specific macropore-mesopore-micropore structure that exposes a large number of active sites and accelerates the electrolyte transport and oxygen diffusion. The MFC with 3DHP Co-N-C-2 as the cathode catalysts shows excellent performance with a maximum power density of 426.9±7.87 mW m^-2 and favorable durability after 50 d of operation. In addition, 16s rDNA results reveal the presence of different dominant electrogenic bacteria and different abundance of important non-electrogenic bacteria in the anode biofilm in MFCs using cathode catalysts with different ORR activity. And 3DHP Co-N-C-2 was found to be beneficial to the synergistic effect of electrogenic and non-electrogenic bacteria. This study explores electrocatalysts in terms of both electrocatalytic activity and anode microorganisms, providing new and comprehensive insights into the power generation of MFC.

The Rational Design of a Financially Viable Microbial Electrolysis Cell for Domestic Wastewater Treatment

Microbial electrolysis cells (MECs) are yet to achieve commercial viability. Organic removal rates (ORR) and capital costs dictate an MEC’s financial competitiveness against activated sludge treatments. We used numerical methods to investigate the impact of acetate concentration and the distance between opposing anodes’ surfaces (anode interstices width) on MEC cost-performance. Numerical predictions were calibrated against laboratory observations using an evolutionary algorithm. Anode interstices width had a non-linear impact on ORR and therefore allowable cost. MECs could be financially competitive if anode interstices widths are carefully controlled (2.5 mm), material costs kept low (£5–10/m2-anode), and wastewater pre-treated, using hydrolysis to consistently achieve influent acetate concentrations &gt;100 mg-COD/l.

Use of Hydrogen as Fuel: A Trend of the 21st Century

The unbridled use of fossil fuels is a serious problem that has become increasingly evident over the years. As such fuels contribute considerably to environmental pollution, there is a need to find new, sustainable sources of energy with low emissions of greenhouse gases. Climate change poses a substantial challenge for the scientific community. Thus, the use of renewable energy through technologies that offer maximum efficiency with minimal pollution and carbon emissions has become a major goal. Technology related to the use of hydrogen as a fuel is one of the most promising solutions for future systems of clean energy. The aim of the present review was to provide an overview of elements related to the potential use of hydrogen as an alternative energy source, considering its specific chemical and physical characteristics as well as prospects for an increase in the participation of hydrogen fuel in the world energy matrix.

Capturing the signal of weak electricigens: a worthy endeavour

Recently several non-traditional electroactive microorganisms have been discovered. These can be considered weak electricigens; microorganisms that typically rely on soluble electron acceptors and donors in their lifecycle but are also capable of extracellular electron transfer (EET), resulting in either a low, unreliable, or otherwise unexpected current. These unanticipated electroactive microorganisms represent a new chapter in electromicrobiology and have important medical, environmental, and biotechnological relevance. As such, it is essential to continue the momentum of their discovery. However, their study poses unique challenges due to their low current output. Capturing their signal necessitates novel approaches including unconventional electrode choice, the use of sensitive electrochemical techniques, and modifications of conventional experiments that use bioelectrochemical systems (BES).

Hydrophilic porous materials provide efficient gas-liquid separation to advance hydrogen production in microbial electrolysis cells

Preventing methane evolution is a key issue to guarantee stable hydrogen production in microbial electrolysis cell (MEC). In this study, low-cost hydrophilic porous materials, such as non-woven cloth (NWC) and polyvinylidenedifluoride (PVDF), were investigated as alternatives to proton exchange membrane (PEM) in MEC. The MEC with a NWC (NWC-MEC) improved the current density and hydrogen production rate (HPR) of 262.5±10 A m^-3 and 2.5±0.2 m³ m^-3 d^-1, respectively, due to its lower pH gradient (0.37) and ion transport resistance (0.9±0.1 mΩ m²). Hydrogen production in NWC-MEC (from 2.5 to 2.1 m³ m^-3 d^-1) and PVDF-MEC (from 2.2 to 2.0 m³ m^-3 d^-1) showed more stable performance compared to PEM-MECs (from 2.2 to 1.6 m³ m^-3 d^-1) during 30 days of operation. Moreover, results of anodic microbial community analysis indicate that the growth of methanogens of NWC-MEC and PVDF-MEC was effectively inhibited in 30 days.

Novel insights into the anaerobic digestion of propionate via Syntrophobacter fumaroxidans and Geobacter sulfurreducens: Process and mechanism

The accumulation of volatile fatty acids, particularly propionic acid, significantly inhibits the efficiency of the anaerobic digestion system. In propionate degradation metabolism, the unfavorable thermodynamics of syntrophic reactions, strict ecological niche of syntrophic priopionate oxidizing bacteria, and slow metabolic rate of methanogens are regarded as major limitations. In this study, Geobacter sulfurreducens was co-cultured with Syntrophobacter fumaroxidans in bioelelectrochemical cells to analyze the propionate degradation process, impact factor, mechanism metabolic pathways, and electron transfer comprehensively. The results revealed that the syntroph S. fumaroxidans and syntrophic partner G. sulfurreducens achieved more efficient propionate degradation than the control group, comprising S. fumaroxidans and methanogens. Moreover, the carbon resource concentration and pH were both significantly correlated with propionate degradation (P < 0.01). The results further confirmed that G. sulfurreducen strengthened the consumption of H₂ and acetate via direct interspecific electron transfer in propionate degradation. These findings indicate that G. sulfurreducens plays an unidentified functional role in propionate degradation.

Progress in osmotic membrane bioreactors research: Contaminant removal, microbial community and bioenergy production in wastewater

Renewable energy, water conservation, and environmental protection are the most important challenges today. Osmotic membrane bioreactor (OMBR) is an innovative process showing superior performance in bioenergy production, eliminating contaminants, and low fouling tendency. However, salinity build-up is the main drawback of this process. Identifying the microbial community can improve the process in bioenergy production and contaminant treatment. This review aims to study the recent progress and challenges of OMBRs in contaminant removal, microbial communities and bioenergy production. OMBRs are widely reported to remove over 80% of total organic carbon, PO₄^3-, NH₄⁺ and emerging contaminants from wastewater. The most important microbial phyla for both hydrogen and methane production in OMBR are Firmicutes, Proteobacteria and Bacteroidetes. Firmicutes' dominance in anaerobic processes is considerably increased from usually 20% at the beginning to 80% under stable condition. Overall, OMBR process has great potential to be applied for simultaneous bioenergy production and wastewater treatment.

Innovative air-cathode bioelectrochemical sensor for monitoring of total volatile fatty acids during anaerobic digestion

Bioelectrochemical sensors have proven attractive as simple and low-cost methods with high potential for online monitoring of volatile fatty acids (VFA) in the anaerobic digestion (AD) process. Herein, an innovative dual-chamber air-cathode microbial fuel cell was developed as biosensor for VFA monitoring. The response of the biosensor was nonlinear and increased along with the concentration of VFA mixture increase (2.8-112 mM). Meanwhile, the relationship was linear with low VFA levels (<14 mM) within 2-5 h reaction. High concentrations of bicarbonate decreased the voltage. Stirring speeded up the response and amplified the signal but reduced the saturation concentration (approximately 30 mM) and therefore narrowed the detection range. The applicability of the biosensor was further validated with the effluents from an AD reactor during a start-up period. The VFA concentrations measured by the biosensor were well correlated with the gas chromatographic measurement. The results demonstrate that this biosensor with a novel design could be used for VFA monitoring during the AD process. Based on the 16S rRNA gene sequencing, the dominant microbiomes in the biofilm were identified as Geobacter, Hydrogenophaga, Pelobacter, Chryseobacterium, Oryzomicrobium, and Dysgonomonas.

Quorum sensing shaped microbial consortia and enhanced hydrogen recovery from waste activated sludge electro-fermentation on basis of free nitrous acid treatment

In this study, the feasibility of free nitrous acid (FNA) pretreatment coupled with quorum sensing (QS) was investigated to enhance hydrogen recovery from waste activated sludge (WAS) via electro-fermentation (EF). 3-oxo-hexanoyl-homoserine lactone (3OC6-HSL), as the signal molecule, was only added in the first three cycles of sludge inoculation at the phase of microbial electrolysis cells (MECs) startup. Results showed that QS combined FNA (AHL-FMEC) enabled highest hydrogen yield and current (4.3 mg/g VSS and 4.5 mA), while that generated from sole FNA/QS treated WAS (FMEC/AHL-RMEC) were only 3.5/3.0 mg/g VSS and 1.5/1.5 mA, respectively. Fourier transform infrared (FT-IR) spectra illustrated the effective conversion of organics in AHL-FMEC, the utilization efficiencies of proteins and carbohydrates achieved to 75.0% and 79.7%, respectively. Besides, the internal resistance decreased from 34.5 Ω (FMEC) to 22.9 Ω (AHL-RMEC), further to 18.0 Ω, indicating the promoted bioelectrochemical activity of electroactive bacteria (EAB) in AHL-FMEC. Correspondingly, both EAB (21.7%), e.g., Geobacter (9.3%) and Pseudomonas (3.2%) and anaerobic fermentation bacteria (AFB, 28.6%), e.g., Proteiniclasticum (14.2%) and Petrimonas (3.6%) enriched to peaks in AHL-FMEC. Moreover, molecular ecological network (MEN) analysis revealed the underling relationships among AFB, EAB and homo-acetogen in EF system, suggesting the possible cooperative QS has been constructed. The results obtained in this study may provide a new insight for efficient hydrogen recovery from electro-fermentation of WAS.

Hydrogen production from lignocellulosic hydrolysate in an up-scaled microbial electrolysis cell with stacked bio-electrodes

Hydrogen production from renewable resources via microbial electrolysis cells (MECs) is a promising approach for sustainable energy production. Yet high hydrogen yield from real feedstocks has not been demonstrated in up-scaled MECs. In this study, a 10-L single chamber MEC with a high electrode surface area to volume ratio (66 m²/m³) was constructed and electroactive cathodic biofilms were enriched for hydrogen evolution reaction. A high hydrogen yield of 91% was achieved using lignocellulosic hydrolysate with a hydrogen production rate of 0.71 L/L/D at an organic loading rate of 0.4 g/D. The anodic and cathodic microbial communities, with Enterococcus spp. as the known electroactive bacteria, were capable of achieving current densities of 13.7 A/m² and 16.5 A/m², respectively. A machine learning algorithm was used to investigate the correlation between community data and electrochemical performance, and the critical genera on determining current density were identified.

Development and application of aerobic, chemically defined media for Dysgonomonas

Members of Dysgonomonas are Gram-stain-negative, non-motile, facultatively anaerobic coccobacilli originally described in relation to their isolation from stool and wounds of human patients (CDC group DF-3). More recently, Dysgonomonas have been found to be widely distributed in terrestrial environments and are particularly enriched in insect systems. Their prevalence in xylophagous insects such as termites and wood-feeding cockroaches, as well as in soil-fed microbial fuel cells, elicit interest in lignocellulose degradation and biofuel production, respectively. Their occurrence in mosquito and fruit fly have implications relating to symbiosis, host immunology and developmental biology. Additionally, their presence in termite, mosquito and nematode present novel opportunities for pest and vector control. Currently, the absolute growth requirements of Dysgonomonas are unknown, and they are commonly cultured under anaerobic conditions on complex media containing blood, peptones, tryptones, and yeast, plant or meat extracts. Restrictive and undefined culturing conditions preclude physiological and genetic studies, and thus further understanding of their metabolic potential. Here we describe the requirements for growth of termite-derived Dysgonomonas isolates and create parallel complex, defined and minimal media that permit vigorous and reliable aerobic growth. Furthermore, we show that these media can be used to easily enrich for Dysgonomonas isolates from densely-colonized and microbially-diverse environmental samples.

Hydrogen production from macroalgae by simultaneous dark fermentation and microbial electrolysis cell

Hydrogen production from Saccharina Japonica by simultaneous dark fermentation (DF) and microbial electrolysis cell (MEC), called sDFMEC, was studied. In the novel sDFMEC process, substrates were converted to H₂ and volatile fatty acids (VFAs) by DF in the bulk phase, and VFAs are simultaneously oxidized by the exoelectrogens in the microbial film on anode electrode with further production of H₂ at the cathode. The sDFMEC process was compared with DF and a combined process of DF and MEC in series (DF-MEC) in terms of H₂ production. The overall H₂ production from S. Japonica in sDFMEC process was higher (438.7 ± 13.3 mL/g-TS), than DF (54.6 ± 0.8 mL/g-TS) and DF-MEC (403.5 ± 7.9 mL/g-TS) process, respectively, which is approximately 3-times higher than those reported in the literature.

Effect of heterotrophic anodic denitrification on anolyte pH control and bioelectricity generation enhancement of bufferless microbial fuel cells

Heterotrophic anodic denitrification (HAD) in the single-chamber microbial fuel cell (MFC) is a promising nitrogen removal technology. In this paper, the benefit (anolyte pH increase) and challenge (substrate consumption) brought by the heterotrophic anodic denitrification process for the electricity generation of bufferless MFCs were studied for the first time. Substrate anaerobic hydrolysis dramatically decreased the anolyte pH to 5.1, which seriously restricted the electric power output of the Control. The anolyte pH of the heterotrophic anodic denitrification MFCs (HADMFCs) with 60 mg/L (HADMFC-60), 90 mg/L (HADMFC-90), and 120 mg/L (HADMFC-120) nitrate nitrogen (NO₃^--N), retained above 6.0, 6.5, and 6.8 in every running cycles, due to the protons (H⁺) consumption by nitrate reduction. In the HADMFC-60 and HADMFC-90, 17.6% and 26.1% of the total organic carbons (TOC) were used for the nitrate reduction, but their electric power output significantly increased. The maximum power densities of the HADMFC-60 and HADMFC-90 were 3.3 and 5.4 times higher than that of the Control. However, when the proportion of TOC consumption for nitrate reduction increased to 35.8%, substrate insufficiency became a serious limitation for the electricity generation. The P_max of the HADMFC-120 dramatically decreased to 17.3 mW/m². Dysgonomonas was the dominant electro-active genus, and Petrimonas, Acidovorax and Devosia appeared as the denitrifying bacteria genera.

Enhanced 2,4,6-trichlorophenol degradation and biogas production with a coupled microbial electrolysis cell and anaerobic granular sludge system

A coupled microbial electrolysis cell - anaerobic granular sludge system (MEC-AGS) was established to explore the degradation efficiency of 2,4,6-trichlorophenol (TCP) with synchronous biogas production. Results showed that MEC-AGS yielded a higher proportion of CH₄ than MEC (83.8 ± 0.4% vs 82.0 ± 1.0%, P < 0.05) with sodium acetate (NaAc) as the only carbon source. Moreover, MEC-AGS had higher tolerance to the addition of TCP, with the highest TCP degradation efficiency of 45.5 ± 0.5% under 5 mg L^-1 of TCP addition in 24 h. Furthermore, microbial community structures were significantly changed based on community composition, hierarchical cluster and PCoA analysis, which proved that MEC-AGS favored the enrichment of dechlorination-related microbes such as Pseudomonas, Desulfovibrio and Longilinea, as well as their syntrophic bacteria of Anaerolineacea, Syntrophobacter, Arcobacter, etc. The coupled system provides a promising strategy for biogas production from wastewater with recalcitrant organics.

Electrodes bioaugmentation promotes the removal of antibiotics from concentrated sludge in microbial electrolysis cells

Microbial electrolysis cells (MECs) had a potential to improve antibiotics removal from wastewater. However, research on antibiotics removal from concentrated sludge using MECs is still very limited. In this study, antibiotics removal and microbial responses in MECs treating concentrated sludge under different applied voltages (0.3 V-1.5 V) were investigated. Results showed that antibiotics removal efficiencies at 0.6 V and 1.0 V were 16.7%-26.6% higher than other applied voltages. The applied voltages had no obvious effects on the viability, activity and composition of microorganisms in the suspended sludge even up to 1.5 V. Bioelectrodes exhibited higher bioelectrocatalytic activity and denser microbial aggregation at 0.6 V and 1.0 V, under which higher antibiotics removal was also achieved. The enhanced removal of antibiotics at the optimal applied voltages was mainly contributed by the bioaugmentation of electrodes, but was irrelative with the electrochemical reaction and the microbial responses in suspended sludge.

Florfenicol restructured the microbial interaction network for wastewater treatment by microbial electrolysis cells

To investigate the influence of antibiotics on microbial interactions in a biofilm community, we set up eight replicate reactors of microbial electrolysis cell (MEC) and applied a broad-spectrum antibiotic florfenical (FLO) as an environmental disturbance. According to the results, exposure to FLO resulted in degradation of reactor performance. The MEC could also rebound back to the comparably stable state at a certain time which exhibited a great resilience ability in response to antibiotic disturbance. The FLO perturbation showed a significant influence on the electroactive biofilms (EABs) with a distinct reformation of the community structure. Network analysis revealed that microbial interactions in the biofilms after full recovery became much closer, with a rapid increase in the positive interactions between the predominant genus Geobacter and other microorganisms as compared to the stage before FLO disturbance. Moreover, the keystone species in the networks after full recovery possessed more connections between Geobacter and potential synergistic species. Our results demonstrated that FLO, with broad-spectrum antibacterial ability, could restructure the EABs with more positive interactions for hydrogen production. This study demonstrated the response mechanisms of the MECs to the antibiotic disturbance, providing a scientific reference for the rapid development of this biotechnology to treat wastewater containing antibiotics.

Application of slow-release carbon sources embedded in polymer for stable and extended power generation in microbial fuel cells

Stable and long-term power output is a prerequisite for the application of the energy recovered from microbial fuel cells (MFCs). In this study, a novel fuel supplying strategy based on slow-release carbon embedded in polymer gels was attempted in MFCs aimed to achieve a sustainable power generation. Polymer gels containing starch acetate as the carbon source (40% (w/w)) were prepared, and the effects of its loading dosage on power generation and microbial community structure were investigated. Results showed that the MFCs once fed with 20.0 g/L, 37.5 g/L and 55.0 g/L polymer gels attained a long-term power generation periods of 110, 140 and 170 days, respectively, with a maximum power density of 386-427 mW/m². The MFC with a medium loading dosage (37.5 g/L polymer gels) performed best. MFCs fed with the slow-release carbon enriched a distinct microbial community comparing to the control MFC with acetate as the carbon source, with the genera Geobacter, Sphaerochaeta, Christensenellaceae, Aminiphilus and Proteiniphilum significantly enriched on the anode electrode, and Sphaerochaeta, Proteiniphilum and Bacteroidetes in the anolyte. This carbon source providing method will promote the application of MFCs as a sustainable and stable power source for environmental monitoring and remediation.

Anaerobic digestion of sludge filtrate using anaerobic baffled reactor assisted by symbionts of short chain fatty acid-oxidation syntrophs and exoelectrogens: Pilot-scale verification

The growing amount of sewage sludge from wastewater treatment plant is an emerging challenge in China. The efficient anaerobic digestion of sludge filtrate generated from hydrothermally pretreated sewage sludge can promote the disposal of sewage sludge. Herein, a pilot-scale anaerobic baffled reactor (ABR) assisted by symbionts of short chain fatty acid-oxidation syntrophs (SFAS) and exoelectrogens was developed to improve its stability and efficiency for filtrate treatment. The results demonstrated that the symbionts of exoelectrogens and SFAS, which were enriched by introduction of electrodes in the ABR system, promoted the degradation of butyric, propionic and acetic acids. Therefore, the COD removal efficiency increased from 74.1% to 86.6% and the methane content increased from 81.5% to 92.2% with methane production rising from 241 to 282 mL/g COD_removed. Furthermore, the economic evaluation indicated that the energy consumption of electrodes was 0.600 kWh/m³ of sludge filtrate, the net energy profited from increased methane was 2.344 kWh/m³ of sludge filtrate. These results confirmed that the ABR system assisted by symbionts of SFAS and exoelectrogens was feasible for treatment of sludge filtrate in terms of both technical and economic level through pilot-scale verification.

Fire Phoenix facilitates phytoremediation of PAH-Cd co-contaminated soil through promotion of beneficial rhizosphere bacterial communities

Pot experiments were conducted in a growth chamber to evaluate the phytoremediation efficiency and rhizosphere regulation mechanism of Fire Phoenix (a mixture of Festuca L.) in polycyclic aromatic hydrocarbon-cadmium (PAH-Cd) co-contaminated soils. Plant biomass, removal rates of PAHs and Cd, soil enzyme activity, and soil bacterial community were determined. After 150 days of planting, the removal rates of the total 4 PAHs and Cd reached 64.57% and 40.93% in co-contaminated soils with low-PAH (104.79-144.87 mg·kg^-1), and 68.29% and 25.40% in co-contaminated soils with high-PAH (169.17-197.44 mg·kg^-1), respectively. The polyphenol oxidase (PPO) activity decreased in soils having Fire Phoenix, while the dehydrogenase (DHO) activity increased as the changes of DHO activity had a strong positive correlation with the removal rates of PAHs and Cd in the low-PAH soils (r = 0.862 (P < 0.006) and 0.913 (P < 0.002), respectively). Meanwhile, successional changes in the bacterial communities were detected using high-throughput 454 Gs-FLX pyrosequencing of the 16S rRNA, and these changes were especially apparent for the co-contaminated soils with the low PAH concentration. The Fire Phoenix could promote the growth of Mycobacterium, Dokdonella, Gordonia and Kaistobacter, which played important roles in PAHs degradation or Cd dissipation. These results indicated that Fire Phoenix could effectively motivate the soil enzyme and bacterial community and enhance the potential for phytoremediation of PAH-Cd co-contaminated soils.

Direct microbial transformation of carbon dioxide to value-added chemicals: A comprehensive analysis and application potentials

Carbon dioxide storage in petroleum and other geological reservoirs is an economical option for long-term separation of this gas from the atmosphere. Other options include applications through conversion to valuable chemicals. Microalgae and plants perform direct fixation of carbon dioxide to biomass, which is then used as raw material for further microbial transformation (MT). The approach by microbial transformation can achieve reduction of carbon dioxide and production of biofuels. This review addresses the research and technological processes related to direct MT of carbon dioxide, factors affecting their efficiency in operation and the review of economic feasibility. Additionally, some commercial plants making utilization of CO₂ around the globe are also summarized along with different value-added chemicals (methane, acetate, fatty acids and alcohols) as reported in literature. Further information is also provided for a better understanding of direct CO₂ MT and its future prospects leading to a sustainable and clean environment.

Magnet anode enhances extracellular electron transfer and enrichment of exoelectrogenic bacteria in bioelectrochemical systems

BACKGROUND

Optimizing the ability of exoelectrogens is a key factor in boosting the overall efficiency of bioelectrochemical systems. In this study, we construct magnetic microbial fuel cells (MFCs) with magnets with different static magnetic field (SMF) intensities for use as anodes. It is proposed as an in situ study of the effects of magnetic fields on the performance and exoelectrogenic biofilm of bioelectrochemical system.

RESULTS

The magnetic MFCs obtain a 71.0-105% increase in voltage production and a 42.9-104% increase in power density compared with non-magnetic MFCs. MFCs with a MF intensity of 80 mT obtain the best performances. SMF decreases the internal resistance of MFCs, especially its diffusion resistance. The relative abundance of Geobacter in magnetic MFCs is up to 32.5% higher than that of non-magnetic MFC. SMFs also lead to the shifts in microbial community structure of methanogens.

CONCLUSION

The constructed magnetic MFCs obtained better performance compared with the non-magnetic MFC, in terms of voltage production, power density, and coulombic efficiency. The relative abundance of Geobacter spp. (one kind of exoelectrogen) was much higher in the magnetic MFCs. The optimal static magnetic field intensity for enriching exoelectrogens is around 80 mT. It is likely that the decrease of internal resistance, enrichment in exoelectrogens, and the syntrophic interactions between exoelectrogens and methanogens result in the enhanced performance of magnetic MFCs. This study provides a magnetic method for the enrichment of exoelectrogens, which can be extensively applied in bioelectrochemical systems.

Neglected Effects of Inoculum Preservation on the Start-Up of Psychrophilic Bioelectrochemical Systems and Shaping Bacterial Communities at Low Temperature

Bioelectrochemical systems (BESs) are capable of simultaneous wastewater treatment and resource recovery at low temperatures. However, the direct enrichment of psychrophilic and electroactive biofilms in BESs at 4°C is difficult due to the lack of understanding in the physioecology of psychrophilic exoelectrogens. Here, we report the start-up and operation of microbial fuel cells (MFCs) at 4°C with pre-acclimated inocula at different temperatures (4°C, 10°C, 25°C, and -20°C) for 7 days and 14 days. MFCs with 7-day-pretreated inocula reached higher peak voltages than did those with 14-day-pretreated inocula. The highest power densities were obtained by MFCs with 25°C - 7-day-, 25°C - 14-day-, and 4°C - 7-day-pretreated inocula (650-700 mW/m2). In contrast, the control MFCs with untreated inocula were stable at 450 mW/m2. The power densities of MFCs with 7-day-pretreated inocula were higher than those obtained by MFCs with 14-day-pretreated inocula. The MFCs with 10°C - 7-day-pretreated inocula and the control MFCs showed higher chemical oxygen demand (COD) removal (90-91%) than other MFCs. Illumina HiSeq sequencing based on 16S rRNA gene amplicons indicated that bacterial communities of the anode biofilms were shaped by pretreated inocula at different temperatures. Compared with the control MFCs with untreated inocula, MFCs with temperature-pretreated inocula demonstrated higher microbial diversity, but did not do so with -20°C-pretreated inocula. Principal components analysis (PCA) revealed an obvious separation between the inocula pretreated at 4°C and those pretreated at 10°C, implying that bacterial community structures could be shaped by pretreated inocula at low temperatures. The pretreatment period also had a diverse impact on the abundance of exoelectrogens and non-exoelectrogens in MFCs with inocula pretreated at different temperatures. The majority of the predominant population was affiliated with Geobacter with a relative abundance of 17-70% at different pre-acclimated temperatures, suggesting that the exoelectrogenic Geobacter could be effectively enriched at 4°C even with inocula pretreated at different temperatures. This study provides a strategy that was previously neglected for fast enrichment of psychrophilic exoelectrogens in BESs at low temperatures.

Selective inhibition of methanogenesis by acetylene in single chamber microbial electrolysis cells

Microbial electrolysis cells (MECs) for hydrogen production exhibit great advantages over many other biohydrogen production techniques in terms of versatility of substrate and hydrogen yield. However, hydrogen and acetate scavenging by methanogens puts forward a great challenge to the application of single chamber MECs when using mixed culture. In this study, we investigated the feasibility of using acetylene, a low-cost fuel and chemical building block, to selectively inhibit methanogenesis in single chamber MECs. Results demonstrate that the periodical injection of low concentration acetylene (1% and 5%) can successfully inhibit methanogenesis in MECs using both acetate and glucose as substrates. Current generation by exoelectrogens and the syntrophy between fermentative bacteria and exoelectrogens, however, were not negatively affected. Compared with the classic methanogen inhibitor, 2-Bromoethanesulfonate (BES), the low concentration acetylene demonstrates superior effectiveness in MECs. These results demonstrate the great potential of using acetylene as a cost-effective inhibitor against methanogenesis in MECs.

The mechanism of synergistic effect between iron-carbon microelectrolysis and biodegradation for strengthening phenols removal in coal gasification wastewater treatment

A novel iron-carbon microelectrolysis (ICME) inoculated with activated sludge (AS) process was specifically designed to look into the roles of microelectrolysis and biodegradation as well as their synergistic effect on phenols removal in coal gasification wastewater (CGW) treatment. The results indicated that the removal efficiency of COD, phenols and TOC in integrated ICME-AS process reached 87.36 ± 2.98%, 92.62 ± 0.76% and 84.45 ± 0.65%, respectively. Moreover, phenols-degrading bacteria and electrochemical-active bacteria presented better adaptability to phenolic impact. Meanwhile their syntrophic interaction was driven under the simulation of microelectrolysis. Furthermore, electrochemical redox efficiency was significantly improved, and the corresponding maximum power output reached 0.043 ± 0.01 mW/cm². Apparently, the synergistic effect between microelectrolysis and biological action effectively strengthened phenols degradation and electricity generation. The results proved that the integrated ICME-AS process was a promising technology applied for CGW and other refractory industrial wastewater treatments.

Temporal variation in bacterial and methanogenic communities of three full-scale anaerobic digesters treating swine wastewater

To investigate the effects of temporal variations of process parameters on microbial community structures in the two types of full-scale anaerobic digester treating swine wastewater, three full-scale anaerobic digesters were monitored. An anaerobic filter (AF)-type digester located in Gong-Ju (GJ) showed the highest COD removal among three digesters and maintained stable efficiency. A digester in Hong-Seong (HS) was of the same type as it GJ and showed improved efficiency over the sampling period. A continuously stirred tank reactor (CSTR)-type digester in Soon-Cheon (SC) showed decreasing efficiency due to a high residual concentration of VFAs and NH₄⁺. These process efficiencies were closely correlated to the Simpson indices of the methanogenic communities. Genera Bacillus, Methanosaeta, and Methanospirillum that have filamentous morphology were dominant in both AF-type digesters, but genera Acholeplasma, Methanosarcina, and Methanoculleus that have spherical or coccoid morphology were dominantly abundant in the CSTR-type digester. Correlation between populations suggests a possible syntrophic relationship between genera Desulfobulbus and Methanosaeta in digesters GJ and HS.

Solar Photothermal Electrodes for Highly Efficient Microbial Energy Harvesting at Low Ambient Temperatures

Temperature is an important parameter for the performance of bioelectrochemical systems (BESs). Energy-intensive bulk water heating has been usually employed to maintain a desired temperature for the BESs. This study concerns a proof-of-concept of a light-to-heat photothermal electrode for solar heating of a local electroactive biofilm in a BES for efficient microbial energy harvesting at low temperatures as a replacement for bulk water heating approaches. The photothermal electrode was prepared by coating Ti₃ C₂ T_x MXene sunlight absorber onto carbon felt. The as-prepared photothermal electrode could efficiently raise the local temperature of the bioelectrode to approximately 30 °C from low bulk water temperatures (i.e., 10, 15, and 20 °C) under simulated sunlight illumination. As a result, highly efficient microbial energy could be harvested from the low-temperature BES equipped with a photothermal electrode without bulk water heating. This study represents a new avenue for the design and fabrication of electrodes for temperature-sensitive electrochemical and biological systems.

Applications of Emerging Bioelectrochemical Technologies in Agricultural Systems: A Current Review

Background: Bioelectrochemical systems (BESs) are emerging energy-effective and environment-friendly technologies. Different applications of BESs are able to effectively minimize wastes and treat wastewater while simultaneously recovering electricity, biohydrogen and other value-added chemicals via specific redox reactions. Although there are many studies that have greatly advanced the performance of BESs over the last decade, research and reviews on agriculture-relevant applications of BESs are very limited. Considering the increasing demand for food, energy and water due to human population expansion, novel technologies are urgently needed to promote productivity and sustainability in agriculture. Methodology: This review study is based on an extensive literature search regarding agriculture-related BES studies mainly in the last decades (i.e., 2009–2018). The databases used in this review study include Scopus, Google Scholar and Web of Science. The current and future applications of bioelectrochemical technologies in agriculture have been discussed. Findings/Conclusions: BESs have the potential to recover considerable amounts of electric power and energy chemicals from agricultural wastes and wastewater. The recovered energy can be used to reduce the energy input into agricultural systems. Other resources and value-added chemicals such as biofuels, plant nutrients and irrigation water can also be produced in BESs. In addition, BESs may replace unsustainable batteries to power remote sensors or be designed as biosensors for agricultural monitoring. The possible applications to produce food without sunlight and remediate contaminated soils using BESs have also been discussed. At the same time, agricultural wastes can also be processed into construction materials or biochar electrodes/electrocatalysts for reducing the high costs of current BESs. Future studies should evaluate the long-term performance and stability of on-farm BES applications.

Enhanced performance and microbial community analysis of bioelectrochemical system integrated with bio-contact oxidation reactor for treatment of wastewater containing azo dye

Feasibility and superiority of the bioelectrochemical system integrated with biocontact oxidation (BES-BCO) for degradation and/or mineralization of azo dyes have been confirmed. In this study, the effects of hydraulic retention time (HRT), applied voltage, and dissolved oxygen (DO) concentration at the bioanode on the performance of BES-BCO and traditional BES were investigated. Using the response surface methodology, the optimum values of HRT, applied voltage, and DO concentration at the bioanode of BES-BCO were investigated to obtain the maximum decolouration and COD removal efficiency and minimum specific energy consumption (SEC). The microbial community structure in BES-BCO was studied for analyzing the change following the introduction of oxygen. The optimised solution was an applied voltage of 0.59V, HRT of 12h, and DO concentration of 0.96mg/L at the bioanode. Under such conditions, the DE, COD removal efficiency, and SEC values were 94.62±0.63%, 89.12±0. 32%, and 687.57±3.86J/g, respectively. In addition, after changing from BES to BES-BCO, the bacterial community structure of the bioanode underwent significant changes. Several aerobic aniline-degrading bacteria and anode-respiration bacteria (ARB) were found to dominate the community of the anode biofilm. The results showed that the removal of azo dye degradation by-products was closely correlated with the o-bioanode and the BCO bacterial community structure.

Factors Affecting the Effectiveness of Bioelectrochemical System Applications: Data Synthesis and Meta-Analysis

Microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) are promising bioelectrochemical systems (BESs) for simultaneous wastewater treatment and energy/resource recovery. Unlike conventional fuel cells that are based on stable chemical reactions, these BESs are sensitive to environmental and operating conditions, such as temperature, pH, external resistance, etc. Substrate type, electrode material, and reactor configuration are also important factors affecting power generation in MFCs and hydrogen production in MECs. In order to discuss the influence of these above factors on the performance of MFCs and MECs, this study analyzes published data via data synthesis and meta-analysis. The results revealed that domestic wastewater would be more suitable for treatment using MFCs or MECs, due to their lower toxicity for anode biofilms compared to swine wastewater and landfill leachate. The optimal temperature was 25–35 °C, optimal pH was 6–7, and optimal external resistance was 100–1000 Ω. Although systems using carbon cloth as the electrodes demonstrated better performance (due to carbon cloth’s large surface area for microbial growth), the high prices of this material and other existing carbonaceous materials make it inappropriate for practical applications. To scale up and commercialize MFCs and MECs in the future, enhanced system performance and stability are needed, and could be possibly achieved with improved system designs.

Effects of wastewater constituents and operational conditions on the composition and dynamics of anodic microbial communities in bioelectrochemical systems

Over the last decade, there has been an ever-growing interest in bioelectrochemical systems (BES) as a sustainable technology enabling simultaneous wastewater treatment and biological production of, e.g. electricity, hydrogen, and further commodities. A key component of any BES degrading organic matter is the anode where electric current is biologically generated from the oxidation of organic compounds. The performance of BES depends on the interactions of the anodic microbial communities. To optimize the operational parameters and process design of BES a better comprehension of the microbial community dynamics and interactions at the anode is required. This paper reviews the abundance of different microorganisms in anodic biofilms and discusses their roles and possible side reactions with respect to their implications on the performance of BES utilizing wastewaters. The most important operational parameters affecting anodic microbial communities grown with wastewaters are highlighted and guidelines for controlling the composition of microbial communities are given.

Glucose and Applied Voltage Accelerated p-Nitrophenol Reduction in Biocathode of Bioelectrochemical Systems

p-Nitrophenol (PNP) is common in the wastewater from many chemical industries. In this study, we investigated the effect of initial concentrations of PNP and glucose and applied voltage on PNP reduction in biocathode BESs and open-circuit biocathode BESs (OC-BES). The PNP degradation efficiency of a biocathode BES with 0.5 V (Bioc-0.5) reached 99.5 ± 0.8%, which was higher than the degradation efficiency of the BES with 0 V (Bioc-0) (62.4 ± 4.5%) and the OC-BES (59.2 ± 12.5%). The PNP degradation rate constant (kPNP) of Bioc-0.5 was 0.13 ± 0.01 h-1, which was higher than the kPNP of Bioc-0 (0.024 ± 0.002 h-1) and OC-BES (0.013 ± 0.0005 h-1). PNP degradation depended on the initial concentrations of glucose and PNP. A glucose concentration of 0.5 g L-1 was best for PNP degradation. The initial PNP increased from 50 to 130 mg L-1 and the kPNP decreased from 0.093 ± 0.008 to 0.027 ± 0.001 h-1. High-throughput sequencing of 16S rRNA gene amplicons indicated differences in microbial community structure between BESs with different voltages and the OC-BES. The predominant populations were affiliated with Streptococcus (42.7%) and Citrobacter (54.1%) in biocathode biofilms of BESs, and Dysgonomonas were the predominant microorganisms in biocathode biofilms of OC-BESs. The predominant populations were different among the cathode biofilms and the suspensions. These results demonstrated that applied voltage and biocathode biofilms play important roles in PNP degradation.