Enhancement of bioelectricity generation by manipulation of the electron shuttles synthesis pathway in microbial fuel cells

Microalgae-bacteria nexus for environmental remediation and renewable energy resources: Advances, mechanisms and biotechnological applications

Microalgae and bacteria, known for their resilience, rapid growth, and proximate ecological partnerships, play fundamental roles in environmental and biotechnological advancements. This comprehensive review explores the synergistic interactions between microalgae and bacteria as an innovative approach to address some of the most pressing environmental issues and the demands of clean and renewable freshwater and energy sources. Studies indicated that microalgae-bacteria consortia can considerably enhance the output of biotechnological applications; for instance, various reports showed during wastewater treatment the COD removal efficiency increased by 40%-90.5 % due to microalgae-bacteria consortia, suggesting its great potential amenability in biotechnology. This review critically synthesizes research works on the microalgae and bacteria nexus applied in the advancements of renewable energy generation, with a special focus on biohydrogen, reclamation of wastewater and desalination processes. The mechanisms of underlying interactions, the environmental factors influencing consortia performance, and the challenges and benefits of employing these bio-complexes over traditional methods are also discussed in detail. This paper also evaluates the biotechnological applications of these microorganism consortia for the augmentation of biomass production and the synthesis of valuable biochemicals. Furthermore, the review sheds light on the integration of microalgae-bacteria systems in microbial fuel cells for concurrent energy production, waste treatment, and resource recovery. This review postulates microalgae-bacteria consortia as a sustainable and efficient solution for clean water and energy, providing insights into future research directions and the potential for industrial-scale applications.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Unraveling the contemporary use of microbial fuel cell in pesticide degradation and simultaneous electricity generation: a review

Pesticide is an inevitable substance used worldwide to kill pests, but their indiscriminate use has posed serious complications to health and the environment. Various physical, chemical, and biological methods are employed for pesticide treatment, but this paper deals with microbial fuel cell (MFC) as a futuristic technology for pesticide degradation with electricity production. In MFC, organic compounds are utilized as the carbon source for electricity production and the generation of electrons which can be replaced with pollutants such as dyes, antibiotics, and pesticides as carbon sources. However, MFC is been widely studied for a decade for electricity production, but its implementation in pesticide degradation is less known. We fill this void by depicting a real picture of the global pesticide scenario with an eagle eye view of the bioremediation techniques implemented for pesticide treatment with phytoremediation and rhizoremediation as effective techniques for efficient pesticide removal. The enormous literature survey has revealed that not many researchers have ventured into this new arena of MFC employed for pesticide degradation. Based on the Scopus database, an increase in annual trend from 2014 to 2023 is observed for MFC-implemented pesticide remediation. However, a novel MFC to date for effective remediation of pesticides with simultaneous electricity generation is discussed for the first time. Furthermore, the limitation of MFC technology and the implementation of MFC and rhizoremediation as a clubbed system which is the least applied can be seen as promising and futuristic approaches to enhance pesticide degradation by bacteria and electricity as a by-product.

Enhanced depolluting capabilities of microbial bioelectrochemical systems by synthetic biology

Microbial bioelectrochemical system (BES) is a promising sustainable technology for the electrical energy recovery and the treatment of recalcitrant and toxic pollutants. In microbial BESs, the conversion of harmful pollutants into harmless products can be catalyzed by microorganisms at the anode (Type I BES), chemical catalysts at the cathode (Type II BES) or microorganisms at the cathode (Type III BES). The application of synthetic biology in microbial BES can improve its pollutant removing capability. Synthetic biology techniques can promote EET kinetics, which is helpful for microbial anodic electro-respiration, expediting pollutant removing not only at the anode but also at the cathode. They offer tools to promote biofilm development on the electrode, enabling more microorganisms residing on the electrode for subsequent catalytic reactions, and to overexpress the pollutant removing-related genes directly in microorganisms, contributing to the pollutant decomposition. In this work, based on the summarized aspects mentioned above, we describe the major synthetic biology strategies in designing and improving the pollutant removing capabilities of microbial BES. Lastly, we discuss challenges and perspectives for future studies in the area.

Advances in mechanisms and engineering of electroactive biofilms

Electroactive biofilms (EABs) are electroactive microorganisms (EAMs) encased in conductive polymers that are secreted by EAMs and formed by the accumulation and cross-linking of extracellular polysaccharides, proteins, nucleic acids, lipids, and other components. EABs are present in the form of multicellular aggregates and play a crucial role in bioelectrochemical systems (BESs) for diverse applications, including biosensors, microbial fuel cells for renewable bioelectricity production and remediation of wastewaters, and microbial electrosynthesis of valuable chemicals. However, naturally occurred EABs are severely limited owing to their low electrical conductivity that seriously restrict the electron transfer efficiency and practical applications. In the recent decade, synthetic biology strategies have been adopted to elucidate the regulatory mechanisms of EABs, and to enhance the formation and electrical conductivity of EABs. Based on the formation of EABs and extracellular electron transfer (EET) mechanisms, the synthetic biology-based engineering strategies of EABs are summarized and reviewed as follows: (i) Engineering the structural components of EABs, including strengthening the synthesis and secretion of structural elements such as polysaccharides, eDNA, and structural proteins, to improve the formation of biofilms; (ii) Enhancing the electron transfer efficiency of EAMs, including optimizing the distribution of c-type cytochromes and conducting nanowire assembly to promote contact-based EET, and enhancing electron shuttles' biosynthesis and secretion to promote shuttle-mediated EET; (iii) Incorporating intracellular signaling molecules in EAMs, including quorum sensing systems, secondary messenger systems, and global regulatory systems, to increase the electron transfer flux in EABs. This review lays a foundation for the design and construction of EABs for diverse BES applications.

Role of bacterial quorum sensing and quenching mechanism in the efficient operation of microbial electrochemical technologies: A state-of-the-art review

Microbial electrochemical technologies (METs) are a group of innovative technologies that produce valuables like bioelectricity and biofuels with the simultaneous treatment of wastewater from microorganisms known as electroactive microorganisms. The electroactive microorganisms are capable of transferring electrons to the anode of a MET through various metabolic pathways such as direct (via cytochrome or pili) or indirect (through transporters) transfer. Though this technology is promising, the inferior yield of valuables and the high cost of reactor fabrication are presently impeding the large-scale application of this technology. Therefore, to overcome these major bottlenecks, a lot of research has been dedicated to the application of bacterial signalling, for instance, quorum sensing (QS) and quorum quenching (QQ) mechanisms in METs to improve its efficacy in order to achieve a higher power density and to make it more cost-effective. The QS circuit in bacteria produces auto-inducer signal molecules, which enhances the biofilm-forming ability and regulates the bacterial attachment on the electrode of METs. On the other hand, the QQ circuit can effectively function as an antifouling agent for the membranes used in METs and microbial membrane bioreactors, which is imperative for their stable long-term operation. This state-of-the-art review thus distinctly describes in detail the interaction between the QQ and QS systems in bacteria employed in METs to generate value-added by-products, antifouling strategies, and the recent applications of the signalling mechanisms in METs to improve their yield. Further, the article also throws some light on the recent advancements and the challenges faced while incorporating QS and QQ mechanisms in various types of METs. Thus, this review article will help budding researchers in upscaling METs with the integration of the QS signalling mechanism in METs.

Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Microbial fuel cells (MFCs) have been demonstrated as a renewable energy strategy to efficiently recover chemical energy stored in wastewater into clean electricity, yet the limited power density limits their practical application. Here, Fe-doped carbon and nitrogen (Fe@CN) nanoparticles were synthesized by a direct pyrolysis process, which was further decorated to fabricate Fe@CN carbon paper anode. The modified Fe@CN anode with a higher electrochemically active surface area was not only benefit for the adhesion of electrochemically active microorganisms (EAMs) and extracellular electron transfer (EET) between the anode and EAMs but also selectively enriched Geobacter, a typical EAMs species. Accordingly, the MFCs with Fe@CN anode successfully achieved a highest voltage output of 792.76 mV and a prolonged stable voltage output of 300 h based on the mixed culture feeding with acetate. Most importantly, the electroactive biofilms on Fe@CN anode achieved more content ratio of proteins to polysaccharides (1.40) in extracellular polymeric substances for the balance between EET and cell protection under a harsh environment. This work demonstrated the feasibility of development on anode catalysts for the elaboration of the catalytic principle about interface modification, which may contribute to the practical application of MFC in energy generation and wastewater treatment.

The two faces of pyocyanin - why and how to steer its production?

The ambiguous nature of pyocyanin was noted quite early after its discovery. This substance is a recognized Pseudomonas aeruginosa virulence factor that causes problems in cystic fibrosis, wound healing, and microbiologically induced corrosion. However, it can also be a potent chemical with potential use in a wide variety of technologies and applications, e.g. green energy production in microbial fuel cells, biocontrol in agriculture, therapy in medicine, or environmental protection. In this mini-review, we shortly describe the properties of pyocyanin, its role in the physiology of Pseudomonas and show the ever-growing interest in it. We also summarize the possible ways of modulating pyocyanin production. We underline different approaches of the researchers that aim either at lowering or increasing pyocyanin production by using different culturing methods, chemical additives, physical factors (e.g. electromagnetic field), or genetic engineering techniques. The review aims to present the ambiguous character of pyocyanin, underline its potential, and signalize the possible further research directions.

Identification of Emerging Industrial Biotechnology Chassis Vibrio natriegens as a Novel High Salt-Tolerant and Feedstock Flexibility Electroactive Microorganism for Microbial Fuel Cell

The development of MFC using electroactive industrial microorganisms has seen a surge of interest because of the co-generation for bioproduct and electricity production. Vibrio natriegens as a promising next-generation industrial microorganism chassis and its application for microbial fuel cells (MFC) was first studied. Mediated electron transfer was found in V. natriegens MFC (VMFC), but V. natriegens cannot secrete sufficient electron mediators to transfer electrons to the anode. All seven electron mediators supplemented are capable of improving the electronic transfer efficiency of VMFC. The media and carbon sources switching study reveals that VMFCs have excellent bioelectricity generation performance with feedstock flexibility and high salt-tolerance. Among them, 1% glycerol as the sole carbon source produced the highest power density of 111.9 ± 6.7 mW/cm². The insight of the endogenous electronic mediators found that phenazine-1-carboxamide, phenazine-1-carboxylic acid, and 1-hydroxyphenazine are synthesized by V. natriegens via the shikimate pathway and the phenazine synthesis and modification pathways. This work provides the first proof for emerging industrial biotechnology chassis V. natriegens as a novel high salt-tolerant and feedstock flexibility electroactive microorganism for MFC, and giving insight into the endogenous electron mediator biosynthesis of VMFC, paving the way for the application of V. natriegens in MFC and even microbial electrofermentation (EF).

Cysteine-Mediated Extracellular Electron Transfer of Lysinibacillus varians GY32

Microbial extracellular electron transfer (EET) is essential in many natural and engineering processes. Compared with the versatile EET pathways of Gram-negative bacteria, the EET of Gram-positive bacteria has been studied much less and is mainly limited to the flavin-mediated pathway. Here, we investigate the EET pathway of a Gram-positive filamentous bacterium Lysinibacillus varians GY32. Strain GY32 has a wide electron donor spectrum (including lactate, acetate, formate, and some amino acids) in electrode respiration. Transcriptomic, proteomic, and electrochemical analyses show that the electrode respiration of GY32 mainly depends on electron mediators, and c-type cytochromes may be involved in its respiration. Fluorescent sensor and electrochemical analyses demonstrate that strain GY32 can secrete cysteine and flavins. Cysteine added shortly after inoculation into microbial fuel cells accelerated EET, showing cysteine is a new endogenous electron mediator of Gram-positive bacteria, which provides novel information to understand the EET networks in natural environments. IMPORTANCE Extracellular electron transport (EET) is a key driving force in biogeochemical element cycles and microbial chemical-electrical-optical energy conversion on the Earth. Gram-positive bacteria are ubiquitous and even dominant in EET-enriched environments. However, attention and knowledge of their EET pathways are largely lacking. Gram-positive bacterium Lysinibacillus varians GY32 has extremely long cells (>1 mm) and conductive nanowires, promising a unique and enormous role in the microenvironments where it lives. Its capability to secrete cysteine renders it not only an EET pathway to respire and survive, but also an electrochemical strategy to connect and shape the ambient microbial community at a millimeter scale. Moreover, its incapability of using flavins as an electron mediator suggests that the common electron mediator is species-dependent. Therefore, our results are important to understanding the EET networks in natural and engineering processes.

Methane-Dependent Extracellular Electron Transfer at the Bioanode by the Anaerobic Archaeal Methanotroph "Candidatus Methanoperedens"

Anaerobic methanotrophic (ANME) archaea have recently been reported to be capable of using insoluble extracellular electron acceptors via extracellular electron transfer (EET). In this study, we investigated EET by a microbial community dominated by "Candidatus Methanoperedens" archaea at the anode of a bioelectrochemical system (BES) poised at 0 V vs. standard hydrogen electrode (SHE), in this way measuring current as a direct proxy of EET by this community. After inoculation of the BES, the maximum current density was 274 mA m^-2 (stable current up to 39 mA m^-2). Concomitant conversion of ¹³CH₄ into ¹³CO₂ demonstrated that current production was methane-dependent, with 38% of the current attributed directly to methane supply. Based on the current production and methane uptake in a closed system, the Coulombic efficiency was about 17%. Polarization curves demonstrated that the current was limited by microbial activity at potentials above 0 V. The metatranscriptome of the inoculum was mined for the expression of c-type cytochromes potentially used for EET, which led to the identification of several multiheme c-type cytochrome-encoding genes among the most abundant transcripts in "Ca. Methanoperedens." Our study provides strong indications of EET in ANME archaea and describes a system in which ANME-mediated EET can be investigated under laboratory conditions, which provides new research opportunities for mechanistic studies and possibly the generation of axenic ANME cultures.

Quorum sensing signals improve the power performance and chlortetracycline degradation efficiency of mixed-culture electroactive biofilms

Electroactive biofilms (EABs) play an important role in bioelectrochemical systems due to their abilities to generate electrons and perform extracellular electron transfer (EET). Here, we investigated the effects of quorum sensing (QS) signals on power output, chlortetracycline degradation, and structure of EABs in MFCs treating antibiotic wastewater. The voltage output of MFCs with C4-HSL and PQS increased by 21.57% and 13.73%, respectively, compared with that without QS signals. The chlortetracycline degradation efficiency in closed-circuit MFCs with C4-HSL and PQS increased by 56.53% and 50.04%, respectively, which resulted from the thicker biofilms, higher biomass, and stronger activities. Additionally, QS signals induced the heterogeneous distribution of EPS for a balance between self-protection and EET under environmental pressure. Geobacter prevailed by the addition of QS signals to resist high chlortetracycline concentration. Our results provided a broader understanding on regulating EABs within electrode interface to improve their performance for environmental remediation and clean energy development.

•

The voltage output of MFCs was enhanced with the addition of QS signals

•

QS signals increased the bioelectrochemical degradation efficiency of CTC

•

EABs exhibited heterogeneity in composition and interaction by the QS signals

•

QS signals induced a balance between self-protection and EET of EABs

Accelerating effect of pyocyanin on microbiologically influenced corrosion of 304 stainless steel by the Pseudomonas aeruginosa biofilm

In this study, the influence of exogenous pyocyanin (PYO) on the microbiologically influenced corrosion (MIC) of 304 stainless steel by Pseudomonas aeruginosa was investigated. Under sterile condition, the additional PYO in the culture medium had no effect on the corrosion of 304 stainless steel. In contrast, P. aeruginosa biofilm inoculated in the media with additional PYO resulted in more severe pitting corrosion. EIS and cyclic potentiodynamic polarization results indicated that exogenous PYO promoted the electron transfer efficiency between the P. aeruginosa biofilm and the stainless steel surface. X-ray photoelectron spectroscopy (XPS) and transmission electron microscope (TEM) results further demonstrated that the P. aeruginosa led the breakdown of passive film predominantly by accelerating the bioreductive dissolution of iron oxides.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

Efficiency of microbial fuel cells in the treatment and energy recovery from food wastes: Trends and applications - A review

The rising global population and their food habits result in food wastage and cause an obstacle in its treatment and disposal. Due to the rapid shift in the lifestyle of the human population and urbanization, almost one-third of the food produced is wasted from various sectors like domestic sources, agricultural sectors, and industrial sectors. These food resources squandered are rich in organic biomolecules which can cause complications upon direct disposal in the environment. Conventional disposal methods like composting, landfills and incineration demand high costs besides causing severe environmental and health issues. To overcome these demerits of the conventional methods and to avoid the loss of rich organic food resources, there is an immediate need for a sustainable and eco-friendly solution for the valorization of the food wastes. Microbial fuel cells (MFCs) are gaining attention, due to their ideal approach in the production of electricity and parallel treatment of organic food wastes. The MFCs are significant as an innovative approach using microorganisms and oxidizing the organic food wastes into bio-electricity. In this review, the recent advancements and practices of the MFCs in the field of food waste treatment and management along with electricity production are discussed. The major outcome of this work highlights the setting up of MFC for the treatment of higher volumes of food waste residues and enhancing the bioelectricity production in an optimal condition. For further improvements in the food waste treatments using MFCs, greater understanding and more research needs are to be focused on the commercialization, different operational modes, operational types, and low-cost fabrication coupled with careful examination of scale-up factors.

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Microbial fuel cells (MFCs) are an emerging technique presenting remarkable potential. In the current MFC, an electroactive biofilm anode was inoculated with activated sludge from a local municipal sewage treatment plant. The output voltage peaked at 0.60 V and 0.56 V in MFCs cultured with 2-chlorophenol (MFC-2-CP) and 2,4-dichlorophenol (MFC-2,4-DCP), respectively. The degradation and mineralization efficiency in MFC-2-CP were 100.0% and 82.0%, respectively. Based on the bacterial 16S rRNA gene sequence analysis, abundant Acinetobacter and Azospirillum existed during both the bioelectricity and biodegradation stages in MFC-2-CP, but different patterns were exhibited in MFC-2,4-DCP. The electrogenic bacteria relied on the electron transfer pathway of nicotinamide adenine dinucleotide dehydrogenase, succinate dehydrogenase and terminal oxidase, while the electrons were transferred to the extracellular electrode by cytochrome C, riboflavin, degradation products of CPs and flagella. 2-CP and 2,4-DCP were biodegraded into less toxic cyclohexanol via dichlorination, hydroxylation, and hydrogenation; hereafter, the ring was opened to generate long-chain hydrocarbons, and finally mineralized into CO₂ and H₂O. This work provided a new strategy for MFCs in power generation and contaminant treatment.

Biocatalyst physiology and interplay: a protagonist of MFC operation

Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies have been executed in both benchtop and pilot scale to produce electrical energy from wastewater. The key role players in this technology that leads to the operation are microbes, mainly bacteria. The dominant among them is termed as "exoelectrogens" that have the capability to produce and transport electron by utilizing waste source. The current review focuses on such electrogenic bacteria's involvement for enhanced power generation of MFC. The pathway of electron transfer in their cell along and its conduction to the extracellular environment of the MFC system are critically discussed. The interaction of the microbes in various MFC operational conditions, including the role of substrate and solid electron acceptors, i.e., anode, external resistance, temperature, and pH, was also discussed in depth along with biotechnological advancement and future research perspective.

Emerging trends in microbial fuel cell diversification-Critical analysis

Global need for transformation from fossil-based to bio-based economy is constantly emerging for the production of low-carbon/renewable energy/products. Microbial fuel cell (MFC) catalysed by bio-electrochemical process gained significant attention initially for its unique potential to generate energy. Diversification of MFC is an emerging trend in the context of prioritising/enhancing product output while exploring the mechanism specificity of individual processes. Bioelectrochemical treatment system (BET), microbial electrosynthesis system (MES), bioelectrochemical system (BES), electro-fermentation (EF), microbial desalination cell (MDC), microbial electrolysis cell (MEC) and electro-methanogenesis (EM) are the diversified MFC systems that are being researched actively. Owing to its broad diversification, MFC domain is increasing its potential credibility as a platform technology. Microbial catalyzed electrochemical reactions are the key which directly/indirectly are proportionally linked to electrometabolic activity of microorganisms towards final anticipated output. This review intends to holistically document the mechanisms, applications and current trends of MFC diversifications towards multi-faced applications.

Genome-scale mutant fitness reveals versatile c-type cytochromes in Shewanella oneidensis MR-1

Shewanella has been widely investigated for its metabolic versatility and use of a large number of extracellular electron acceptors. Many c-type cytochromes are responsible for this diversity, mainly in condition-specific fashions. By using genome-scale mutant fitness data, we studied which genes (particularly c-type cytochromes) were used to coordinate various electron transfer processes in the present work. First, by integrating fitness profiles with protein-protein interaction (PPI) networks, we showed that the genes with a high total fitness value were generally more important in PPI networks than those with low fitness values. Then, we identified genes that are important across many experiments, and further fitness analysis confirmed five versatile c-type cytochromes: ScyA (SO0264), PetC (SO0610), CcoP (SO2361), CcoO (SO2363) and CytcB (SO4666), which are considered to be crucial in most experimental conditions. Finally, we demonstrated a mediating role in the periplasm for the less-reported CytcB by combining protein structure, subcellular localization and disordered region analysis. Comparative genome analysis further revealed that it is distinctive in Shewanella species. Collectively, these results suggest that periplasmic electron transfer processes are more diverse and flexible than previously reported, giving insight for further experimental studies of Shewanella oneidensis MR-1.

Microbial extracellular electron transfer and strategies for engineering electroactive microorganisms

Electroactive microorganisms (EAMs) are ubiquitous in nature and have attracted considerable attention as they can be used for energy recovery and environmental remediation via their extracellular electron transfer (EET) capabilities. Although the EET mechanisms of Shewanella and Geobacter have been rigorously investigated and are well characterized, much less is known about the EET mechanisms of other microorganisms. For EAMs, efficient EET is crucial for the sustainable economic development of bioelectrochemical systems (BESs). Currently, the low efficiency of EET remains a key factor in limiting the development of BESs. In this review, we focus on the EET mechanisms of different microorganisms, (i.e., bacteria, fungi, and archaea). In addition, we describe in detail three engineering strategies for improving the EET ability of EAMs: (1) enhancing transmembrane electron transport via cytochrome protein channels; (2) accelerating electron transport via electron shuttle synthesis and transmission; and (3) promoting the microbe-electrode interface reaction via regulating biofilm formation. At the end of this review, we look to the future, with an emphasis on the cross-disciplinary integration of systems biology and synthetic biology to build high-performance EAM systems.

Genetic engineering for enhanced productivity in bioelectrochemical systems

A shift from petrochemical processes toward a bio-based economy is one of the most advocated developments for a sustainable future. To achieve this will require the biotechnological production of platform chemicals that can be further processed by chemical engineering. Bioelectrochemical systems (BESs) are a novel tool within the biotechnology field. In BESs, microbes serve as biocatalysts for the production of biofuels and value-added compounds, as well as for the production of electricity. Although the general feasibility of bioelectrochemical processes has been demonstrated in recent years, much research has been conducted to develop biocatalysts better suited to meet industrial demands. Initially, mainly natural exoelectrogenic organisms were investigated for their performance in BESs. Driven by possibilities of recent developments in genetic engineering and synthetic biology, the spectrum of microbial catalysts and their versatility (substrate and product range) have expanded significantly. Despite these developments, there is still a tremendous gap between currently achievable space-time yields and current densities on the one hand and the theoretical limits of BESs on the other. It will be necessary to move the performance of the biocatalysts closer to the theoretical possibilities in order to establish viable production routines. This review summarizes the status quo of engineering microbial biocatalysts for anode-applications with high space-time yields. Furthermore, we will address some of the theoretical limitations of these processes exemplarily and discuss which of the present strategies might be combined to achieve highly synergistic effects and, thus, meet industrial demands.

Global regulator engineering enhances bioelectricity generation in Pseudomonas aeruginosa-inoculated MFCs

The electricigens with high-electroactivity is essential for resolving the low electricity power output (EPT) of microbial fuel cells (MFCs). However, the manipulation by single functional genes shows limitation because electroactivity is a complex phenotype controlled by multiple genes. Herein, global regulator engineering (GRE) was developed to optimize the electroactivity of an isolated strain (Pseudomonas aeruginosa P3-A-11) using an exogenous global regulator IrrE (ionizing radiation resistance E linkage group) as an object. The GRE was implemented through in vitro random mutagenesis by error-prone PCR and in vivo high-through screening comprised of cultures color assay, PYO measurement and MFCs operation. Four mutants with higher electroactivity were obtained, among which, the mutant 11/M2-59 not only displayed the maximal power density, but also exhibited stronger salt tolerance, consequently showing good performance of MFCs in the presence of salt. Apart from the reduced internal resistance, the increase in phenazines amounts primarily contributed to EPT improvement, which was realized by enhancing the core biosynthesis pathway and affecting other pathways (such as central metabolism pathway, quorum sensing system, regulatory network). Notably, IrrE exerted its positive effect on electroactivity even without native regulators (such as PmpR and RpoS). In addition, the significant fluctuations in expression levels of stress-responsive genes mediated by GRE were closely associated with the enhanced salt tolerance. This work demonstrated that GRE was an effective approach for simultaneously optimizing multiple phenotypes (such as electroactivity and stress tolerance), and thus would provide more opportunities to create high-efficiency electricigens and further promoted the practical application of MFCs.

Potential of Zymomonas mobilis as an electricity producer in ethanol production

BACKGROUND

Microbial fuel cell (MFC) convokes microorganism to convert biomass into electricity. However, most well-known electrogenic strains cannot directly use glucose to produce valuable products. Zymomonas mobilis, a promising bacterium for ethanol production, owns special Entner-Doudoroff pathway with less ATP and biomass produced and the low-energy coupling respiration, making Z. mobilis a potential exoelectrogen.

RESULTS

A glucose-consuming MFC is constructed by inoculating Z. mobilis. The electricity with power density 2.0 mW/m² is derived from the difference of oxidation-reduction potential (ORP) between anode and cathode chambers. Besides, two-type electricity generation is observed as glucose-independent process and glucose-dependent process. For the sake of enhancing MFC efficiency, extracellular and intracellular strategies are implemented. Biofilm removal and addition of c-type cytochrome benefit electricity performance and Tween 80 accelerates the electricity generation. Perturbation of cellular redox balance compromises the electricity output, indicating that redox homeostasis is the principal requirement to reach ideal voltage.

CONCLUSION

This study identifies potential feature of electricity activity for Z. mobilis and provides multiple strategies to enhance the electricity output. Therefore, additional electricity generation will benefit the techno-economic viability of the commercial bulk production for biochemicals or biofuels in an efficient and environmentally sustainable manner.

Recovery of Metals from Acid Mine Drainage by Bioelectrochemical System Inoculated with a Novel Exoelectrogen, Pseudomonas sp. E8

Acid mine drainage (AMD) is a typical source of environmental pollution ascribing to its characteristics of high acidity and heavy metal content. Currently, most strategies for AMD treatment merely focus on metal removal rather than metal recovery. However, bioelectrochemical system (BES) is a promising technology to simultaneously remove and recover metal ions from AMD. In this study, both cupric ion and cadmium ion in simulated AMD were effectively recovered by BES inoculated with a novel exoelectrogen, Pseudomonas sp. E8, that was first isolated from the anodic electroactive biofilm of a microbial fuel cell (MFC) in this study. Pseudomonas sp. E8 is a facultative anaerobic bacterium with a rod shape, 0.43–0.47 μm wide, and 1.10–1.30 μm long. Pseudomonas sp. E8 can agglomerate on the anode surface to form a biofilm in the single-chamber MFC using diluted Luria-Bertani (LB) medium as an energy substrate. A single-chamber MFC containing the electroactive Pseudomonas sp. E8 biofilms has a maximum output voltage of 191 mV and a maximum power density of 70.40 mW/m², which is much higher than those obtained by most other exoelectrogenic strains in the genus of Pseudomonas. Almost all the Cu²⁺ (99.95% ± 0.09%) and Cd²⁺ (99.86% ± 0.04%) in simulated AMD were selectively recovered by a microbial fuel cell (MFC) and a microbial electrolysis cell (MEC). After the treatment with BES, the high concentrations of Cu²⁺(184.78 mg/L), Cd²⁺(132.25 mg/L), and total iron (49.87 mg/L) in simulated AMD were decreased to 0.02, 0.19, and 0 mg/L, respectively. Scanning electron micrograph (SEM), energy dispersive X-ray spectrometry (EDXS) and X-ray diffraction (XRD) analysis indicate that the Cu²⁺ and Cd²⁺ in simulated AMD were selectively recovered by microbial electrochemical reduction as Cu⁰ (together with trace amounts of Cu₂O) or Cd⁰ on the cathode surface. Collectively, data suggest that Pseudomonas sp. E8 has great potential for AMD treatment and metal recovery.

Strategies for improving the electroactivity and specific metabolic functionality of microorganisms for various microbial electrochemical technologies

Electroactive microorganisms, which possess extracellular electron transfer (EET) capabilities, are the basis of microbial electrochemical technologies (METs) such as microbial fuel and electrolysis cells. These are considered for several applications ranging from the energy-efficient treatment of waste streams to the production of value-added chemicals and fuels, bioremediation, and biosensing. Various aspects related to the microorganisms, electrodes, separators, reactor design, and operational or process parameters influence the overall functioning of METs. The most fundamental and critical performance-determining factor is, however, the microorganism-electrode interactions. Modification of the electrode surfaces and microorganisms for optimizing their interactions has therefore been the major MET research focus area over the last decade. In the case of microorganisms, primarily their EET mechanisms and efficiencies along with the biofilm formation capabilities, collectively considered as microbial electroactivity, affect their interactions with the electrodes. In addition to electroactivity, the specific metabolic or biochemical functionality of microorganisms is equally crucial to the target MET application. In this article, we present the major strategies that are used to enhance the electroactivity and specific functionality of microorganisms pertaining to both anodic and cathodic processes of METs. These include simple physical methods based on the use of heat and magnetic field along with chemical, electrochemical, and growth media amendment approaches to the complex procedure-based microbial bioaugmentation, co-culture, and cell immobilization or entrapment, and advanced toolkit-based biofilm engineering, genetic modifications, and synthetic biology strategies. We further discuss the applicability and limitations of these strategies and possible future research directions for advancing the highly promising microbial electrochemistry-driven biotechnology.

A novel biosensor for zinc detection based on microbial fuel cell system

Microbial fuel cell (MFC) biosensors are self-sustainable device for monitoring of various substrates; however, for heavy metals detection are still scarce. In this study, E. coli BL21 was engineered to express the zntR, ribB, and oprF genes with P_zntA promoter, which could sense zinc (Zn²⁺) for riboflavin and porin production. The engineered strain produced high levels of riboflavin (2.4-3.6 μM) and improved cell membrane permeability, with a positive correlation of Zn²⁺ (0-400 μM). The strain was then employed in MFC biosensor under the following operational parameters: external resistance 1000 Ω, pH 9, and temperature 37 °C for Zn²⁺ sensing. The maximum voltages (160, 183, 260, 292, and 342 mV) of the constructed MFC biosensor have a linear relationship with Zn²⁺ concentrations (0, 100, 200, 300, and 400 μM, respectively) (R² = 0.9777). An Android App was developed for the biosensor system that could sense Zn²⁺ in real-time and in situ. The biosensor was applied to wastewater with different Zn²⁺ concentrations and the results showed that the detection range for Zn²⁺ was 20-100 μM, which covers common Zn²⁺ safety standards. The results obtained with developed MFC biosensor were comparable to conventional methods such as colorimetric, flame atomic absorption spectroscopy (FAAS), and inductively coupled plasma optical emission spectroscopy (ICP-OES). In summary, MFC biosensor with biosynthetic strain is an efficient and affordable system for real-time monitoring and sensing of heavy metals.

Biological synthesis of high-conductive pili in aerobic bacterium Pseudomonas aeruginosa

Bioelectrical nanowires as ecomaterials have great potential on environmental applications. A wide range of bacteria can express type IV pili (T4P), which are long protein fibers assembled from PilA. The T4P of Geobacter sulfurreducens are well known as "microbial nanowires," yet T4P of Pseudomonas aeruginosa (PaT4P) was believed to be poorly conductive. P. aeruginosa is an aerobic and electrochemically active bacterium. Its T4P have been known to be responsible for surface attachment, twitching motility and biofilm formation. Here, we show that PaT4P can be highly conductive while assembled by a truncated P. aeruginosa PilA (PaPilA) containing only N-terminus 61 amino acids. Furthermore, increasing the number of aromatic amino acids in the PaPilA_1-61 significantly enhances the conductivity of pili and the bioelectricity output of P. aeruginosa in microbial fuel cell system, suggesting a potential application of PaT4P as a conductive nanomaterial. The N-terminal region of PilA from diverse eubacteria is highly conserved, implying a general way to synthesize highly conductive microbial nanowires and to increase the bioelectricity output of microbial fuel cell.

Engineering rheology of electrolytes using agar for improving the performance of bioelectrochemical systems

The present study is focused on enhancing the rheological properties of the electrolyte and eliminating sedimentation of microorganisms/flocs without affecting the electron transfer kinetics for improved bioelectricity generation. Agar derived from polysaccharide agarose (0.05-0.2%, w/v) was chosen as a rheology modifying agent. Electroanalytical investigations showed that electrolytes modified with 0.15% agar display a nine-fold increase in current density (1.2 mA/cm²) by a thermophilic strain (Geobacillus sp. 44C, 60 °C) when compared with the control. Sodium phosphate buffer (0.1 M, pH 7) electrolyte with riboflavin (0.1 mM) was used as the control. Electrolytes modified with 0.15% agar significantly improved chemical oxygen demand removal rates. This developed electrolyte will aid in improving bioelectricity generation in Bioelectrochemical Systems (BES). The developed strategy avoids the use of peristaltic pumps and magnetic stirrers, thereby improving the energy efficiency of the process.

Electro-Microbiology as a Promising Approach Towards Renewable Energy and Environmental Sustainability

Microbial electrochemical technologies provide sustainable wastewater treatment and energy production. Despite significant improvements in the power output of microbial fuel cells (MFCs), this technology is still far from practical applications. Extracting electrical energy and harvesting valuable products by electroactive bacteria (EAB) in bioelectrochemical systems (BESs) has emerged as an innovative approach to address energy and environmental challenges. Thus, maximizing power output and resource recovery is highly desirable for sustainable systems. Insights into the electrode-microbe interactions may help to optimize the performance of BESs for envisioned applications, and further validation by bioelectrochemical techniques is a prerequisite to completely understand the electro-microbiology. This review summarizes various extracellular electron transfer mechanisms involved in BESs. The significant role of characterization techniques in the advancement of the electro-microbiology field is discussed. Finally, diverse applications of BESs, such as resource recovery, and contributions to the pursuit of a more sustainable society are also highlighted.

A comprehensive overview on electro-active biofilms, role of exo-electrogens and their microbial niches in microbial fuel cells (MFCs)

Microbial fuel cells (MFCs) are biocatalyzed systems which can drive electrical energy by directly converting chemical energy using microbial biocatalyst and are considered as one of the important propitious technologies for sustainable energy production. Much research on MFCs experiments is under way with great potential to become an alternative to produce clean energy from renewable waste. MFCs have been one of the most promising technologies for generating clean energy industry in the future. This article summarizes the important findings in electro-active biofilm formation and the role of exo-electrogens in electron transfer in MFCs. This study provides and brings special attention on the effects of various operating and biological parameters on the biofilm formation in MFCs. In addition, it also highlights the significance of different molecular techniques used in the microbial community analysis of electro-active biofilm. It reviews the challenges as well as the emerging opportunities required to develop MFCs at commercial level, electro-active biofilms and to understand potential application of microbiological niches are also depicted. Thus, this review is believed to widen the efforts towards the development of electro-active biofilm and will provide the research directions to overcome energy and environmental challenges.

Submarine Basaltic Glass Colonization by the Heterotrophic Fe(II)-Oxidizing and Siderophore-Producing Deep-Sea Bacterium Pseudomonas stutzeri VS-10: The Potential Role of Basalt in Enhancing Growth

Phylogenetically and metabolically diverse bacterial communities have been found in association with submarine basaltic glass surfaces. The driving forces behind basalt colonization are for the most part unknown. It remains ambiguous if basalt provides ecological advantages beyond representing a substrate for surface colonization, such as supplying nutrients and/or energy. Pseudomonas stutzeri VS-10, a metabolically versatile bacterium isolated from Vailulu'u Seamount, was used as a model organism to investigate the physiological responses observed when biofilms are established on basaltic glasses. In Fe-limited heterotrophic media, P. stutzeri VS-10 exhibited elevated growth in the presence of basaltic glass. Diffusion chamber experiments demonstrated that physical attachment or contact of soluble metabolites such as siderophores with the basaltic glass plays a pivotal role in this process. Electrochemical data indicated that P. stutzeri VS-10 is able to use solid substrates (electrodes) as terminal electron donors and acceptors. Siderophore production and heterotrophic Fe(II) oxidation are discussed as potential mechanisms enhancing growth of P. stutzeri VS-10 on glass surfaces. In correlation with that we discuss the possibility that metabolic versatility could represent a common and beneficial physiological trait in marine microbial communities being subject to oligotrophic and rapidly changing deep-sea conditions.

Bio-Electron-Fenton (BEF) process driven by microbial fuel cells for triphenyltin chloride (TPTC) degradation

The intensive use of triphenyltin chloride (TPTC) has caused serious environmental pollution. In this study, an effective method for TPTC degradation was proposed based on the Bio-Electron-Fenton process in microbial fuel cells (MFCs). The maximum voltage of the MFC with graphite felt as electrode was 278.47% higher than that of carbon cloth. The electricity generated by MFC can be used for in situ generation of H₂O₂ to a maximum of 135.96μmolL^-1 at the Fe@Fe₂O_3(*)/graphite felt composite cathode, which further reacted with leached Fe²⁺ to produce hydroxyl radicals. While 100μmolL^-1 TPTC was added to the cathodic chamber, the degradation efficiency of TPTC reached 78.32±2.07%, with a rate of 0.775±0.021μmolL^-1h^-1. This Bio-Electron-Fenton driving TPTC degradation might involve in SnC bonds breaking and the main process is probably a stepwise dephenylation until the formation of inorganic tin and CO₂. This study provides an energy saving and efficient approach for TPTC degradation.