Effects of CeO₂ nanoparticles on production and physicochemical characteristics of extracellular polymeric substances in biofilms in sequencing batch biofilm reactor

Non-filamentous bulking of activated sludge induced by graphene oxide: Insights from extracellular polymeric substances

Widespread use of nanomaterials raises concerns. The underlying mechanism by which graphene oxide (GO) nanoparticles causes poor settleability of activated sludge remains unclear. To explore this mechanism, three reactors with different GO concentrations were established. Extended Derjaguin-Landau-Verwey-Overbeek theory indicated that GO destroyed the property of extracellular polymeric substances (EPS), increasing the energy barrier between bacteria. Low levels of uronic acid and hydrogen bonding in exopolysaccharide weakened the EPS gelation increasing aggregation repulsion. Lager amounts of hydrophilic amino acid and looser structure of extracellular proteins for exposing inner hydrophilic groups significantly contributed to the hydrophilicity of EPS. Both changes implied deterioration in EPS structure under GO stress. Metagenome demonstrated a decrease in genes responsible for capsular polysaccharide colonization and genes regulated the translocation of loose proteins were increased, which increased repulsion between bacteria. This study elucidated that changes in EPS secretion under GO exposure are the underlying causes of poor settleability.

Ecotoxicity of a mixture of nanoparticles on algal species Scendesmus obliquus in OECD growth media, wastewater, and pond water

The possible impact of ZnO and CuO nanoparticles (NPs) (individually and in binary mixture) was investigated using the freshwater microalgae, Scenedesmus obliquus. The present study shows the effect of nanoparticles on algae in OECD growth media, wastewater, and pond water during a 96-h toxicity test. At 0.1 mg/L concentration of the mixture of NPs, the reduction in the chlorophyll a content was 13.61 ± 1.34% (OECD media), 28.83 ± 1.85% (wastewater), and 31.81 ± 2.23% (pond water). Values of reduction in biomass were observed to be 42.13 ± 1.38, 39.96 ± 1.03, and 33.10 ± 1.29% for OECD media, wastewater, and pond water, respectively. The highest increase in lipid values was observed in the case of pond water (6.3 ± 1.31%). A significant increase in the value of EPS-generated protein was observed in the wastewater sample. EPS-generated carbohydrate values were increased in OECD media but decreased in the wastewater matrix. The transmission electron microscope images showed structural damage to algae cells due to the exposure to a mixture of nanoparticles at higher concentrations. Fourier transform infrared analysis showed an addition of bonds and differences in the peak and its intensity during exposure to high concentrations of NPs. Overall, this study gives fundamental insights into the interaction and toxicity of a mixture of NPs to algal species in different water matrices.

Toxic effects of environmentally persistent free radicals (EPFRs) on the surface of tire wear particles on freshwater biofilms: The alleviating role after sewage-incubation-aging

The aquatic ecological risks posed by the surface-active components of tire wear particles (TWPs) are not fully understood. This study aimed to determine the acute (24 h exposure) aquatic toxicity effects of TWPs on freshwater biofilms in terms of total organic carbon (TOC), chlorophyll-a (Chl-a) abundance, quantum yield (ФM), and adenosine triphosphate (ATP). Three types of TWP were tested: TWPs produced via the typical wear of tires and roads (i.e., rolling friction (R-TWPs) and sliding friction (S-TWPs)) and cryogenically milled tire treads (C-TWPs). The results showed that the surface structural properties of the three TWPs differed significantly in morphology, bare composition, functional groups, and surface-active components (environmental persistent free radicals). The exposure of biofilms to the TWPs increased TOC and ATP at low concentrations (1 mg L-1) but inhibited them at high concentrations (50 mg L-1). All TWP types inhibited biofilm photosynthesis (reduced Chl-a and ФM) and altered the community structure of algae to varying degrees; in addition, the toxicity mechanisms of the TWPs contributed to the accumulation of reactive oxygen species and cell membrane (or cell-wall) fragmentation, leading to lactate dehydrogenase release. S-TWPs were the most toxic because their surface carried the highest environmental persistent free radicals. R-TWPs were the second most toxic, which was attributed to their smaller particle size. The toxicity of all TWPs was tested after sewage incubation aging. The results showed that the toxicity of all TWPs reduced as the sewage covered their surface components and active sites. This process also reduced the differences in toxicity among the TWPs. This study filled a research gap in our understanding of aquatic toxicity caused by the surface structural properties of tire microplastics and has implications for the study of microplastic biotoxicity mechanisms.

Dissolved oxygen benefits N-decanoyl-homoserine lactone regulated biological nitrogen removal system to resist acute ZnO nanoparticle exposure

The beneficial effects of N-decanoyl-homoserine lactone (C₁₀-HSL), one of the typical N-acyl-homoserine lactones on biological nitrogen removal (BNR) system to resist the acute exposure of zinc oxide nanoparticles (ZnO NPs) has attracted extensive attentions. Nevertheless, the potential impact of dissolved oxygen (DO) concentration on the regulatory capacity of C₁₀-HSL in the BNR system has yet to be investigated. This study conducted a systematic investigation of the impact of DO concentration on the C₁₀-HSL-regulated BNR system against short-term ZnO NP exposure. Based on the findings, sufficient DO played a crucial role to improve the BNR system's resistance capacity to ZnO NPs. Under the micro-aerobic condition (0.5 mg/L DO), the BNR system was more sensitive to ZnO NPs. The ZnO NPs induced increased intracellular reactive oxygen species (ROS) accumulation, reduced antioxidant enzyme activities, and decreased specific ammonia oxidation rates in the BNR system. Furthermore, the exogenous C₁₀-HSL had a positive effect on the BNR system's resistance to ZnO NP-induced stress, primarily by decreasing ZnO NPs-induced ROS generation and improving ammonia monooxygenase activities, especially under low DO concentrations. The findings contributed to the theoretical foundation for regulation strategy development of wastewater treatment plants under NP shock threat.

Phytogenically Synthesized Zinc Oxide Nanoparticles (ZnO-NPs) Potentially Inhibit the Bacterial Pathogens: In Vitro Studies

The usefulness of nanoparticles (NPs) in biological applications, such as nanomedicine, is becoming more widely acknowledged. Zinc oxide nanoparticles (ZnO-NPs) are a type of metal oxide nanoparticle with an extensive use in biomedicine. Here, ZnO-NPs were synthesized using Cassia siamea (L.) leaf extract and characterized using state-of-the-art techniques; UV-vis spectroscopy, XRD, FTIR, and SEM. At sub-minimum inhibitory concentration (MIC) levels, the ability of ZnO@Cs-NPs to suppress quorum-mediated virulence factors and biofilm formation against clinical MDR isolates (Pseudomonas aeruginosa PAO1 and Chromobacterium violaceum MCC-2290) was tested. The ½MIC of ZnO@Cs-NPs reduced violacein production by C. violaceum. Furthermore, ZnO@Cs-NPs sub-MIC significantly inhibited virulence factors such aspyoverdin, pyocyanin, elastase, exoprotease, rhamnolipid, and the swimming motility of P. aeruginosa PAO1 by 76.9, 49.0, 71.1, 53.3, 89.5, and 60%, respectively. Moreover, ZnO@Cs-NPs also showed wide anti-biofilm efficacy, inhibiting a maximum of 67 and 56% biofilms in P. aeruginosa and C. violaceum, respectively. In addition, ZnO@Cs-NPs suppressed extra polymeric substances (EPS) produced by isolates. Additionally, under confocal microscopy, propidium iodide-stained cells of P. aeruginosa and C. violaceum show ZnO@Cs-NP-induced impairment in membrane permeability, revealing strong anti-bacterial efficacy. This research demonstrates that newly synthesized ZnO@Cs-NPs demonstrate a strong efficacy against clinical isolates. In a nutshell, ZnO@Cs-NPs can be used as an alternative therapeutic agent for managing pathogenic infections.

Integrated photocatalysis and moving bed biofilm reactor (MBBR) for treating conventional and emerging organic pollutants from synthetic wastewater: Performances and microbial community responses

Increasing concern for emerging organic pollutants (e.g. antibiotics) urges improvements in conventional biological wastewater treatment processes. This study examined the performance of an integrated photocatalysis and moving bed biofilm reactor (MBBR) system in treating synthetic wastewater containing sulfamethoxazole (SMX). It was found that the integrated system could remove over 80.5 % of SMX and 67.7-80.7 % of chemical oxygen demand (COD) with a hydraulic retention time of 24 h. The introduction of photocatalysis had no impact on COD removal and significantly enhanced SMX removal. High-throughput analysis indicated that microbial community greatly altered due to photocatalytic oxidation stress, with clostridiaceae and enterobacteriaceae becoming dominant families. Nevertheless, microorganisms maintained metabolic activity, which may be ascribed to the protection of carriers and microbial self-preservation by secreting extracellular polymeric substances and antioxidant enzymes. Collectively, this study sheds light on treating wastewater containing conventional and emerging organic pollutants by integrating photocatalysis with MBBR.

Effects of hydrodynamic conditions on the composition, spatiotemporal distribution of different extracellular polymeric substances and the architecture of biofilms

Microbial biofilms are common on abiotic and biotic surfaces, especially in rivers, which drive crucial ecosystem processes. The microorganisms of biofilms are surrounded by a self-produced extracellular polymeric substance (EPS). In this study, we investigated the effects of different hydrodynamic conditions on the composition, spatiotemporal distribution of different extracellular polymeric substances, and the architecture of biofilms. Multidisciplinary methods offer complementary insights into complex architecture correlations in biofilms. The biofilms formed in turbulent flow with high shear force were thin but dense. However, the biofilms formed under laminar flow conditions were thick but relatively loose. The thickness and compactness of the biofilms formed in the transitional flow were different from those of the other biofilms. The compact structure of the biofilm helped to resist shear forces to minimize detachment. Under the turbulent flow condition, bacteria, exopolysaccharides, and extracellular proteins permeated through the biofilm, and more extracellular polysaccharides enveloped bacteria and extracellular proteins. However, under the transitional flow condition, the extracellular polysaccharides and proteins were fewer than those under the turbulent flow condition; bacteria and algae were seen more prominently in the upper layer of the biofilm. Under the laminar flow condition, the distribution of extracellular polysaccharides, extracellular proteins, and bacteria was relatively uniform throughout the biofilm. The number of extracellular polysaccharides was greater than that of extracellular proteins. The total number of EPS in the biofilm was the largest under turbulent flow condition, followed by that under transitional flow condition and then under laminar flow condition. This study also observed that soluble EPS (S-EPS) were secreted first, followed by loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS). In particular, the adhesion of LB-EPS and flocculation capability of TB-EPS play some role in regulating biofilm formation. This study would help to perfect the five-stages theory of biofilm formation.

Enhancement of sludge dewaterability by electrolysis coupled with peroxymonosulfate oxidation process: Performance, mechanisms and implications

With the rapid increase in waste activated sludge (WAS), it is urgent to develop appropriate dewatering processes to diminish sludge volume and improve disposal efficiency. In this study, an advanced oxidation process using electrolysis coupled with peroxymonosulfate (E/PMS) was applied to improve the dewaterability of WAS. The results indicated that the sludge water content (WC) and capillary suction time (CST) dropped from 98.4 ± 0.2% and 220.1 ± 2.3 s to 70.7 ± 0.8% and 63.0 ± 1.2 s, respectively, under the following conditions: an electrolysis voltage of 20 V, an electrolysis time of 20 min, and 200 mg/g TS PMS. The increase in sludge zeta potential, surface hydrophobicity, and flowability indicated a significant improvement in sludge dewaterability. SO₄^•-, O•H, and O₂1 generated in the E/PMS process were responsible for the improvement of WAS dewaterability. These reactive oxygen species damaged extracellular polymeric substances (EPS), decreased fluorescent EPS components, and transformed the extracellular protein secondary structures by influencing the H-bond actions that maintain the α-helix. The bound water content, and apparent viscosity of WAS were found to be reduced, which was also attributed to an increase in dewatering capacity. Additionally, E/PMS treatment enhanced the degradation of organic matter in sludge and reduced the toxicity of the filtrate as well as the bioavailability of heavy metals. The cost analysis found that the E/PMS process was relatively economical and has great potential for practical application.

Insights into the response of anammox sludge to the combined stress of nickel and salinity

Anaerobic ammonium oxidation (anammox) is a promising technology applied to treat industrial wastewater, while the commonly coexistent heavy metals and salinity usually become a challenging issue to be addressed. In this study, the responses of anammox sludge in terms of performance, activity, functional enzyme and extracellular polymeric substance (EPS) to the combined stress of Ni(II) and salinity (20 ‰) were investigated holistically. It turned out that low Ni(II) concentration (0.2 mg·L^-1) together with salinity (20 ‰) showed an insignificant effect on the anammox performance, while a decreased nitrogen removal by 46.96 % was observed with the increased Ni(II) concentration to 1 mg·L^-1. It should be pointed out that the anammox system exhibited good robustness evidenced by rapid recovery to achieve 89.13 % of nitrogen removal efficiency and 1.21 kg·m^-3·d^-1 of nitrogen removal rate after the elimination of stress factors within 40 days. Ni(II) concentration was revealed to play a more important role in the specific activity of anammox sludge. The functional enzymes related to nitrogen removal, e.g. nitrite reductase (NIR), hydrazine oxidase (HZO) and heme c were found to be inhibited by the combined stress of Ni(II) and salinity, with decreased activity by 49.54 %, 39.39 % and 45.88 %, respectively. However, the enzyme related to assimilation, e.g. alkaline phosphatase (AKP) and nitrate reductase (NAR) appeared to be enhanced. The EPS content was found to decrease by 55.19 % under the combined stress. Detailed analysis of 3D-EEM and FTIR spectra further revealed that the combined stress of Ni(II) and salinity could change both the quantity and composition of EPS in anammox sludge. These results are expected to offer insights into the combined effect of nickel and salinity on the anammox system, and benefit the application of anammox technology for industrial metal-rich saline wastewater treatment.

Protonated carbon nitride elicits microalgae for water decontamination

Comprehending the effects of synthetic nanomaterials on natural microorganisms is critical for the development of emerging nanotechnologies. Compared to artificial inactivation of microbes, the up-regulation of biological functions should be more attractive due to the possibility of discovering unexpected properties. Herein, a nanoengineering strategy was employed to tailor g-C₃N₄ for the metabolic regulation of algae. We found that surface protonated g-C₃N₄ (P-C₃N₄) as a nanopolymeric elicitor enabled the reinforced biological activity of Microcystis aeruginosa and Scenedesmus for harmful substances removal. Metabolomics analysis suggested that synthetic nanoarchitectures induced moderate oxidative stress of algae, with up-regulated biosynthesis of extracellular polymeric substances (EPS) for resisting the physiological damage caused by toxic substances in water. The formation of oxidative ^.O₂^- contributed to over five-fold enhancement in the biodecomposition of harmful aniline. Our study demonstrates a synergistic biotic-abiotic platform with valuable outcomes for various customized applications.

Ozone and Fenton oxidation affected the bacterial community and opportunistic pathogens in biofilms and effluents from GAC

Granular activated carbon (GAC) filtration impacts pathogen colonization and bacterial communities in drinking water. However, the effects of ozone and heterogeneous Fenton oxidation on microbial community composition, in particular opportunistic pathogens (OPs), and their metabolic potential in biofilms and effluents from GAC filtration are not fully understood. The results of our pilot-scale test indicated that Fenton-GAC filtration removed more dissolved organic carbon (DOC, 1.25 mg/L) than ozone-GAC filtration (0.98 mg/L). Excitation-emission matrix (EEM) results showed that Fenton-GAC removed more tyrosine-like proteins and fulvic acid-like materials, while ozone-GAC removed more humic acid-like compounds and tryptophan-like proteins. Illumina HiSeq analysis indicated that Curvibacter and Hydrogenophaga dominated in the Fenton-GAC biofilm, while Bradyrhizobium, Aquabacterium and Limnobacter were predominant in the ozone-GAC biofilm. Functional prediction suggested that the microbial functional gene related to glyoxylate and dicarboxylate metabolism (the pathway for carbohydrate metabolism) was higher in the Fenton-GAC biofilm, resulting in higher contents of protein in extracellular polymeric substances (EPS) in the Fenton-GAC biofilm. Therefore, there were fewer bacteria that detached from the biofilm into the water during the Fenton-GAC filtration process. The lower EPS content in the effluents from Fenton-GAC resulted in bacteria, including OPs, being easier to remove by chlorine. However, ozone oxidation removed more bacteria, including different OPs, than Fenton oxidation, which contributed to fewer bacteria and OPs in the effluents from ozone-GAC. Overall, our results provide a Fenton-GAC treatment process to remove DOC and control OPs in drinking water systems, the cost of which was comparable to that of ozone-GAC.

The responses of activated sludge to membrane cleaning reagent H2O2 and protection of extracellular polymeric substances

Hydrogen peroxide (H₂O₂) is evaluated as a potential replacement for chlorine to control biofouling in membrane bioreactors (MBRs). However, H₂O₂ might diffuse into the mixed liquor and damage microorganisms during membrane cleaning. This study comprehensively analyzed the impacts of H₂O₂ on microbes. Key enzymes involved in phenol biodegradation were inhibited with H₂O₂ concentration increased, and thus phenol degradation efficiency was decreased. Increase of lactic dehydrogenase (LDH) and intracellular reactive oxygen species (ROS) indicated more severe cell rupture with H₂O₂ concentration increased. At the same H₂O₂ concentration, Extracellular polymeric substances (EPS) extraction further led to inhibiting the activity of key enzymes, decreasing phenol degradation efficiency, and enhancing LDH release and ROS production, demonstrating that the existence of EPS moderated the adverse impacts on microbes. Spectroscopic characterization revealed the increase of H₂O₂ decreased tryptophan protein-like substances, protein-associated bonds and polysaccharide-associated bonds. Hydroxyl and amide groups in EPS were attacked, which might lead to the consumption of H₂O₂, indicated EPS protect the microorganism through sacrificial reaction with H₂O₂.

Toxicity assessment and underlying mechanisms of multiple metal organic frameworks using the green algae Chlamydomonas reinhardtii model

Metal-organic frameworks (MOFs) are an emerging class of materials which have garnered increasing attention for their utility as adsorbents and photocatalysts in water treatment. Nevertheless, the environmental risks of MOFs, especially their underlying impacts on aquatic organisms, are not fully explored. Herein, the toxicity of multiple representative MOFs was systematically assessed using a freshwater green alga (Chlamydomonas reinhardtii) model. Six typical MOFs with different metal nodes or organic linkers, including four transition metal incorporated aluminum-based porphyrin MOFs [pristine Al-PMOF, Al-PMOF (Cu), Al-PMOF (Ni), and Al-PMOF (Co)], one amine-functionalized MOF NH₂-MIL-125 (Ti), and one bimetallic Hofmann MOF (NiCo-PYZ), were successfully synthesized and characterized. All the tested MOFs significantly reduced the chlorophyll content and inhibited the algal growth, with the most toxic materials being NiCo-PYZ and Al-PMOF (Cu). Distinct toxic mechanisms were observed for the tested MOFs. Metal ion release was the primary cause for algal toxicity induced by NiCo-PYZ. The algal toxicity induced by porphyrin MOFs could be explained by the combined effects of metal ion release and nutrient adsorption, agglomeration and physical interactions, and reactive oxygen species generation. NH₂-MIL-125 (Ti) showed higher stability and more biocompatibility than the other tested MOFs. MOFs concentrations with no harmful effects to algae can be taken as the threshold values for safe use and discharge of MOFs. The ecotoxicological risks of MOFs should be considered as the applied concentrations of MOFs at mg/mL levels in environmental remediation were much higher than the no harmful effect thresholds.

Trihalomethanes formation enhanced by manganese chlorination and deposition in plastic drinking water pipes

Residual manganese(II) in finished water undergoes further oxidation and deposition in drinking water distribution systems (DWDS), and Mn deposits can function as sites for accumulating organic and inorganic pollutants. This study aims to explore how Mn transformation and deposition affect the formation of disinfection byproducts (DBPs) in chlorinated DWDS, and trihalomethanes (THMs) was selected as a representative DBP. In a 100 μg/L Mn system, regulated THMs (chlorinated/bromated-THMs) increased by over 20% higher than Mn-free system after 150-day operation; when 50 μg/L iodide (I^-) entered pipe systems after 150 days, iodinated THMs (I-THMs) in 100 μg/L Mn system increased by over 30% compared with Mn-free system. These promotions were attributed primarily to the accumulation of biomolecules and organic substances by tight and hard chlorinated Mn deposits. The residence of inactivated cells and the bridging role of surface Mn(III) in Mn deposits increased the quantity of THM precursors in DWDS. Furthermore, the rapid catalytic oxidation of Mn(II) by preformed Mn oxides (MnO_x) inhibited the conversion of free iodine (HOI/OI^-) to iodate, resulting in the generation of more I-THMs. This study provides new insights into the DBP risks caused by Mn in DWDS.

Biological detoxification and decolorization enhancement of azo dye by introducing natural electron mediators in MFCs

Reactive red 2 (RR2) is a highly recalcitrant and toxic azo dye that can cause the collapse of biological treatment system. Although MFC can decolorize RR2 effectively, its performance is still inevitably affected by toxicity. Anthraquinone can enhance MFCs' performance through mediating electron transfer. In this study, an anthraquinone-rich natural plants (B.rheum (Rheum offcinale Baill)) was extracted and then added to MFCs. The optimal dosage was selected and the enhanced effects were investigated. The results showed that adding 5%(V/V) extract resulted in the optimal performance elevation of MFC. When 5% extract was added together with RR2, 15.63% and 1.33-fold improvement in RR2 decolorization efficiency and rate were achieved compared with the control group. Meanwhile, higher power density (2.75 W/m³), coulombic efficiency (6.45%), and lower internal resistance (233.69 Ω) were also observed when 5% B.rheum extract and RR2 were added. B.rheum extract in MFCs enhanced microbial activity and enriched the dye-degrading microorganisms, such as Enterobacter, Raoultella, Comamonas and Shinella. B.rheum extract acts as "antidote" in alleviating the biotoxicity of RR2 was firstly illustrated in this study. The results provided a new strategy for using plant-source electron mediators to simultaneously improve biological detoxification, bioelectricity generation and dye decolorization in bioelectrochemical system.

Destruction of microbial stability in drinking water distribution systems by trace phosphorus polluted water source

The effects of trace phosphate concentrations (0, 0.3 and 0.6 mg/L) in water source were investigated on microbial stability of the drinking water distribution systems (DWDSs). Obviously, the results verified that in the effluent of DWDSs simulated by annular reactors (ARs), the total microbial biomass and the absolute concentration of opportunistic pathogens such as Legionella pneumophila, Mycobacterium avium, and Hartmanella vermiformis increased significantly with phosphate concentration increasing. Based on X-ray powder diffractometer and zeta potentials measurement, trace phosphate did change physicochemical properties of corrosion products, hence promoting microbes escape from corrosion products to bulk water to a certain extent. Stimulated by chlorine disinfectant and phosphate, the extracellular polymeric substances (EPS) from the suspended biofilms of AR-0.6 gradually exhibited superior characteristics including higher content, flocculating efficiency, hydrophobicity and tightness degree, contributing to formation of large-scale suspended biofilms with strong chlorine-resistance ability. However, the disinfection by-products concentration in DWDSs barely changed due to the balance of EPS precursors contribution and biodegradation effect, covering up the microbiological water quality risk. Therefore, more attention should be paid to the trace phosphorus polluted water source though its concentration was much lower than wastewater. This is the first study successfully revealing the influence mechanism of trace phosphate on microbial stability in DWDSs, which may help to fully understand the biofilms transformation and microbial community succession in DWDSs.

Adaptation mechanism of aerobic denitrifier Enterobacter cloacae strain HNR to short-term ZnO nanoparticle stresses

The adaptation mechanism of a wild type (WT) and resistant type (Re) strain of the aerobic denitrifier Enterobacter cloacae strain HNR to short-term ZnO nanoparticle (NP) stresses was investigated. The results showed that Re maintained higher nitrite reductase (NIR) and nitrate reductase (NR) activities and showed lower increment of reactive oxygen species (ROS) than WT, under ZnO NP stresses. The affinity constant (K_A) of WT to Zn²⁺ was 5.06 times that of Re, indicating that Re was more repulsive to Zn²⁺ released by ZnO NPs. Transcriptomic analysis revealed that the up-regulation of the nitrogen metabolism of Re helped maintain NIR and NR activities, that the enhancement of purine metabolism lowered the intracellular ROS increment, and that the up-regulation of cationic antimicrobial peptide resistance contributed to the lower K_A of Re to Zn²⁺. These findings provided new insights into the adaptation mechanism of aerobic denitrifying bacteria to ZnO NPs.

Graphene-Based Nanomaterials Modulate Internal Biofilm Interactions and Microbial Diversity

Graphene-based nanomaterials (GBMs), such as graphene oxide (GO) and reduced graphene oxide (rGO), possess unique properties triggering high expectations for the development of new technological applications and are forecasted to be produced at industrial-scale. This raises the question of potential adverse outcomes on living organisms and especially toward microorganisms constituting the basis of the trophic chain in ecosystems. However, investigations on GBMs toxicity were performed on various microorganisms using single species that are helpful to determine toxicity mechanisms but fail to predict the consequences of the observed effects at a larger organization scale. Thus, this study focuses on the ecotoxicological assessment of GO and rGO toward a biofilm composed of the diatom Nitzschia palea associated to a bacterial consortium. After 48 and 144 h of exposure to these GBMs at 0, 0.1, 1, and 10 mg.L⁻¹, their effects on the diatom physiology, the structure, and the metabolism of bacterial communities were measured through the use of flow cytometry, 16S amplicon sequencing, and Biolog ecoplates, respectively. The exposure to both of these GBMs stimulated the diatom growth. Besides, GO exerted strong bacterial growth inhibition as from 1 mg.L⁻¹, influenced the taxonomic composition of diatom-associated bacterial consortium, and increased transiently the bacterial activity related to carbon cycling, with weak toxicity toward the diatom. On the contrary, rGO was shown to exert a weaker toxicity toward the bacterial consortium, whereas it influenced more strongly the diatom physiology. When compared to the results from the literature using single species tests, our study suggests that diatoms benefited from diatom-bacteria interactions and that the biofilm was able to maintain or recover its carbon-related metabolic activities when exposed to GBMs.

Coordinated response of Au-NPs/rGO modified electroactive biofilms under phenolic compounds shock: Comprehensive analysis from architecture, composition, and activity

Electroactive biofilms (EABs) can be integrated with conductive nanomaterials to boost extracellular electron transfer (EET) for achieving efficient waste treatment and energy conversion in bioelectrochemical systems. However, the in situ nanomaterial-modified EABs of mixed-culture, and their response under environmental stress are rarely revealed. Here, two nanocatalyst-decorated EABs were established by self-assembled Au nanoparticles-reduced graphene oxide (Au-NPs/rGO) in mixed-biofilms with different maturities, then their multi-property were analyzed under long-term phenolic shock. Results showed that the power density of Au-NPs/rGO decorated EABs was significantly enhanced by 28.66-42.82% due to the intensified EET pathways inside biofilms. Meanwhile, the electrochemical and catalytic performance of EABs were controllably regulated by 0.3-3.0 g/L phenolic compounds, which, however, resulted in differential alterations in their architecture, composition, and viability. EABs originated with higher maturity displayed more compact structure, lower thickness (110 μm), higher biomass (8.67 mg/cm²) and viability (0.85-0.91), endowing it better antishock ability to phenolic compounds. Phenolic-shock also induced the heterogeneous distribution of extracellular polymeric substances in terms of both spatial and bonding degrees of the decorated EABs, which could be regarded as an active response to strike a balance between self-protection and EET under environmental pressure. Our findings provide a broader understanding of microbe-electrode interactions in the micro-ecology interface and improve their performance in the removal of complex contaminants for sustainable remediation and new-energy development.

Surface Properties and Environmental Transformations Controlling the Bioaccumulation and Toxicity of Cerium Oxide Nanoparticles: A Critical Review

Increasing production and utilization of cerium oxide nanoparticles (CNPs) in recent years have raised wide concerns about their toxicity. Numerous studies have been conducted to reveal the toxicity of CNPs, but the results are sometimes contradictory. In this review, the most important factors in mediating CNPs toxicity are discussed, including (1) the roles of physicochemical properties (size, morphology, agglomeration condition, surface charge, coating and surface valence state) on CNPs toxicity; (2) the phase transfer and transformation process of CNPs in various aqueous, terrestrial, and airborne environments; and (3) reductive dissolution of CNPs core and their chemical reactions with phosphate, sulfate/S^2-, and ferrous ions. The physicochemical properties play key roles in the interactions of CNPs with organisms and consequently their environmental transformations, reactivity and toxicity assessment. Also, the speciation transformations of CNPs caused by reactions with (in)organic ligands in both environmental and biological systems would further alter their fate, transport, and toxicity potential. Thus, the toxicity mechanisms are proposed based on the physical damage of direct adsorption of CNPs onto the cell membrane and chemical inhibition (including oxidative stress and interaction of CNPs with biomacromolecules). Finally, the current knowledge gaps and further research needs in identifying the toxicological risk factors of CNPs under realistic environmental conditions are highlighted, which might improve predictions about their potential environmental influences. This review aims to provide new insights into cost-effectiveness of control options and management practices to prevent environmental risks from CNPs exposure.

Effects of ZnO nanoparticles on flocculation and sedimentation of activated sludge in wastewater treatment process

Despite the behaviors of ZnO nanoparticles (ZnO NPs) in wastewater treatment processes have been widely explored, the impacts of ZnO NPs on the activated sludge's flocculation and sedimentation performances for solid-liquid separation have rarely been involved yet. In this study, ZnO NPs were observed to exert a dose-dependent negative effect on the sludge's flocculation performance but did not significantly impact the sludge' sedimentation behaviors. Furthermore, it was NPs themselves rather than the dissolved Zn²⁺ who impaired on the sludge flocculation performance because the Zn²⁺ alone would not compromise the sludge's flocculation efficiency. In addition, the sludge flocculation performance was revealed to be inversely related to the extracellular polymeric substances (EPS) content in the sludge and the direct contacts between ZnO NPs and the cells in the sludge should be the prerequisite to stimulate the secretion of the sludge EPS. The poor sludge flocculation performance could also be caused by the reduced protein/polysaccharide (PN/PS) ratio and the zeta (ζ) potential in the loosely bound (LB-EPS) after the sludge exposure to ZnO NPs. Fourier transform-infrared spectra (FT-IR) and three dimensional - excitation emission fluorescence spectra (3D-EEM) analysis further revealed that the decrease of the tyrosine PN-like substance level in the LB-EPS was probably the key reason for the decreased PN/PS ratio and ζ potential in the LB-EPS, which eventually induced the decline of the sludge flocculation performance under the ZnO NP stress. These results could potentially expand the knowledge on sludge flocculation and sedimentation in the presence of ZnO NPs.

Effects of heavy metals and metal (oxide) nanoparticles on enhanced biological phosphorus removal

With the rapid growth of economics and nanotechnology, a significant portion of the anthropogenic emissions of heavy metals and nanoparticles (NPs) enters wastewater streams and discharges to wastewater treatment plants, thereby potentially posing a risk to the bacteria that facilitate the successful operation of the enhanced biological phosphorus (P) removal (EBPR) process. Although some efforts have been made to obtain detailed insights into the effects of heavy metals and metal (oxide) nanoparticles [Me(O)NPs], many unanswered questions remain. One question is whether the toxicity of Me(O)NPs originates from the released metal ions. This review aims to holistically evaluate the effects of heavy metals and Me(O)NPs. The interactions among extracellular polymeric substances, P, and heavy metals [Me(O)NPs] are presented and discussed for the first time. The potential mechanisms of the toxicity of heavy metals [Me(O)NPs] are summarized. Additionally, mathematical models of the toxicity and removal of P, heavy metals, and Me(O)NPs are overviewed. Finally, knowledge gaps and opportunities for further study are discussed to pave the way for fully understanding the inhibition of heavy metals [Me(O)NPs] and for reducing their inhibitory effect to maximize the reliability of the EBPR process.

Deterioration of biological pollutants removal induced by linear alkylbenzene sulphonates in sequencing batch reactors: Insight of sludge characteristics, microbial community and metabolic activity

Linear alkylbenzene sulfonates (LAS) are widely detected in wastewater, and pose potential risks to environment. The influences of LAS on the typical pollutants removal in sequencing batch reactors (SBRs) were evaluated. The results indicated that the removal efficiency of COD, NH₄⁺ and PO₄^3- was respectively reduced by 10.5-27.5%, 5.4-7.3% and11.6-28.9% with the exposure of 10-50 mg/L LAS. Mechanisms investigation found that LAS disrupted the sludge structure and reduced the biomass in reactors due to the saponification effects. Also, the presence of LAS altered the microbial community of activated sludge, and reduced the abundances of functional bacterial responsible for pollutants removal (i.e.Candidatus Accumulibacter, Nitrospira, Denitratisoma and etc.). Moreover, the LAS exhibited negative impacts on the microbial activity with increased LDH release but decreased ATP concentration. The genes expressions for microbial metabolism (i.e. carbohydrate metabolisms, energy metabolism) and typical pollutants removal (i.e. electron transport, phosphonate transport) were all downregulated in LAS-exposed SBRs.

The Crucial Role of Environmental Coronas in Determining the Biological Effects of Engineered Nanomaterials

In aquatic environments, a large number of ecological macromolecules (e.g., natural organic matter (NOM), extracellular polymeric substances (EPS), and proteins) can adsorb onto the surface of engineered nanomaterials (ENMs) to form a unique environmental corona. The presence of environmental corona as an eco-nano interface can significantly alter the bioavailability, biocompatibility, and toxicity of pristine ENMs to aquatic organisms. However, as an emerging field, research on the impact of the environmental corona on the fate and behavior of ENMs in aquatic environments is still in its infancy. To promote a deeper understanding of its importance in driving or moderating ENM toxicity, this study systemically recapitulates the literature of representative types of macromolecules that are adsorbed onto ENMs; these constitute the environmental corona, including NOM, EPS, proteins, and surfactants. Next, the ecotoxicological effects of environmental corona-coated ENMs on representative aquatic organisms at different trophic levels are discussed in comparison to pristine ENMs, based on the reported studies. According to this analysis, molecular mechanisms triggered by pristine and environmental corona-coated ENMs are compared, including membrane adhesion, membrane damage, cellular internalization, oxidative stress, immunotoxicity, genotoxicity, and reproductive toxicity. Finally, current knowledge gaps and challenges in this field are discussed from the ecotoxicology perspective.

CeO2 Nanoparticles Regulate the Propagation of Antibiotic Resistance Genes by Altering Cellular Contact and Plasmid Transfer

The dissemination and propagation of antibiotic resistance genes (ARGs) via plasmid-mediated conjugation pose a major threat to global public health. The potential effects of nanomaterials on ARGs fates have drawn much attention recently. In this study, CeO₂ nanoparticles (NPs), one of the typical nanomaterials proposed for increasing crop production, were applied at the concentration range of 1-50 mg/L to investigate their effects on ARGs transfer between Escherichia coli. Our results revealed that the conjugative transfer of RP4 plasmid was enhanced by 118-123% at relatively high concentrations (25 and 50 mg/L) of CeO₂ NPs, however, CeO₂ NPs at low concentrations (1 and 5 mg/L) inhibited the transfer by 22-26%. The opposite effect at low concentrations is mainly attributed to (i) the reduced ROS level, (ii) the weakened intercellular contact via inhibiting the synthesis of polysaccharides in extracellular polymeric substances, and (iii) the down-regulated expression of plasmid transfer genes due to the shortage of ATP supply. Our findings highlight the distinct dose-dependent responses of ARGs conjugative transfer, providing evidence for selecting appropriate NPs dose to reduce the spread of ARGs while applying nanoagrotechnology.

Enhanced excretion of extracellular polymeric substances associated with nonylphenol tolerance in Dictyosphaerium sp

Dictyosphaerium sp. is tolerant to nonylphenol (NP); however, knowledge regarding the mechanisms involved in NP tolerance is limited. In this study, a batch of algal culture experiments were carried out to elucidate the underlying mechanisms by investigating the production and composition of extracellular polymeric substances (EPS) in algae exposed to NP. The excretion of EPS was significantly enhanced (P < 0.001) in algae exposed to 4 and 8 mg/L of NP. The polysaccharides in soluble EPS and the proteins in bound EPS were specifically overproduced. The three-dimensional excitation and emission matrix fluorescence spectra analyses indicated that tyrosine- and tryptophan-like substances were the main functional compositions in the proteins of EPS. In addition, enhanced EPS secretion significantly alleviated the toxicity of NP to the algae by the reduction of cell internalization, as indicated by the higher IC₅₀, biomass, and cell growth rate in the algae with EPS. These discoveries along with the characterizations by algal cell surface hydrophobicity analysis, scanning electron microscopy, and Fourier transform infrared spectra spectroscopy demonstrated the vital role of EPS in the algal resistance to NP.

Effects of ZnO nanoparticles on aerobic denitrifying bacteria Enterobacter cloacae strain HNR

The aerobic denitrification process is a promising and cost-effective alternative to the conventional nitrogen removal process. Widely used ZnO nanoparticles (NPs) will inevitably reach wastewater treatment plants, and cause adverse impacts on aerobic denitrification and nitrogen removal. Therefore, a full understanding of the responses and adaption of aerobic denitrifiers to ZnO NPs is essential to develop effective strategies to reduce adverse effects on wastewater treatment. In this study, the responses and adaption to ZnO NPs were investigated of a wild type strain (WT) and a resistant type strain (Re) of aerobic denitrifying bacteria Enterobacter cloacae strain HNR. When exposed to 0.75 mM ZnO NPs, the nitrate removal efficiency of Re was 11.2% higher than that of WT. To prevent ZnO NPs entering cells by adsorption, the production of extracellular polymeric substances (EPS) of WT and Re strains increased 13.2% and 43.9%, respectively. The upregulations of amino sugar and carbohydrate-related metabolism contributed to the increase of EPS production, and the increased nitrogen metabolism contributed to higher activities of nitrate and nitrite reductases. Interestingly, cationic antimicrobial peptide resistance contributed to resist Zn (II) released by ZnO NPs, and many antioxidative stress-related metabolism pathways were upregulated to resist the oxidative stress resulting from ZnO NPs. These findings will guide efforts to improve the aerobic denitrification process in an environment polluted by NPs, and promote the application of aerobic denitrification technologies.

Efficient removal of disinfection by-products precursors and inhibition of bacterial detachment by strong interaction of EPS with coconut shell activated carbon in ozone/biofiltration

The change of water quality was investigated in pilot-scale ozone-biological activated carbon (O₃-BAC) filters using an emerging coconut shell-based granular activated carbon (CAC) or traditional granular activated carbon (GAC), respectively. More dissolved organic carbon (DOC) and disinfection by-products (DBPs) precursors were removed, meanwhile, less microbes, less metabolites and smaller microbial clusters were detected in the effluent of CAC compared with GAC. Sequentially, lower DBPs formation and higher disinfection efficiency were achieved in drinking water distribution systems (DWDSs). Furthermore, it was observed that extracellular electron transfer was enhanced in the attached biofilms of CAC, hence improving the microbial metabolic activity and biological removal of DOC. The results were attributed to the strong interaction of extracellular polymeric substances (EPS) with highly graphitized CAC. In addition, CAC resulted in totally different EPS in attached biofilms with superior characteristics including stronger viscosity, higher flocculating efficiency, mechanical stability and numerous binding sites for bacterial cells. Consequently, a wide range of compact interconnected biofilms formed on the surface of CAC and exhibited certain binding effect for microbial flocs and metabolites. Therefore, CAC resulted in higher microbial metabolic activity and lower release of microbes and metabolites, which was beneficial to maintain water quality safety in downstream DWDSs.

Insights into spatial effects of ceria nanoparticles on oxygen mass transfer in wastewater biofilms: Interfacial microstructure, in-situ microbial activity and metabolism regulation mechanism

Growing international exploitation of ceria nanoparticles (CeO₂ NPs) for varied applications has increased their release into wastewater treatment plants. Mass transfer of oxygen (MTO) in wastewater biofilm is of considerable importance to influence the activity and purification ability of biofilm. Herein, we investigated the spatial distribution of oxygen in gas-liquid-biofilm phases, the microstructure of interfaces and the in-situ microbial activity to reveal the impacts of CeO₂ NPs on MTO in wastewater biofilm and the related mechanisms. After exposure to 1 and 10 mg/L CeO₂ NPs, the oxygen transfer coefficient (K_La) from gas to wastewater increased by 28.1% and 75.3% with a reduction of thickness in gas-liquid boundary layer, indicating the enhanced MTO in gas-liquid interface. In contrast, the MTO in liquid-biofilm interface was negatively affected and the thickness of liquid-biofilms boundary layer significantly increased, which was mainly attributed to the smoother surface and the decreased surface area difference of biofilm. Within biofilm, the microbial activity was inhibited by 10 mg/L CeO₂ NPs, whereas the production of extracellular polymeric substance (EPS) was significantly improved, leading to a decline of 35.0% in the internal effective diffusivity (D_B) and a 300-μm reduction of oxygen penetration depth. Moreover, the relative activities of key enzymes involved in glycometabolism indicated the transition of Embden-Meyerhof pathway to pentose phosphate pathway, which probably contributed to the enhanced EPS production and consequently increased mass transfer resistance in liquid-biofilm interface and inner biofilm. These results could potentially expand the knowledge on mass transfer of nutrients or pollutants in wastewater biofilm in response to NPs exposure.

Fate and role of fluorescence moieties in extracellular polymeric substances during biological wastewater treatment: A review

In biological wastewater treatment systems, extracellular polymeric substances (EPS) are continuously excreted as a response to environmental changes and substrate conditions. It could severely affect the treatment efficacy such as membrane fouling, dewaterability and the formation of carcinogenic disinfection by-products (DBPs). The heterogeneous dissolved organic matter (DOM) with varying size and chemical nature constitute a primary proportion of EPS. In the last few decades, fluorescence spectroscopy has received increasing attention for characterizing these organic substances due to the attractive features of this low-cost spectroscopic approach, including easy sample handling, rapid, non-destructive and highly sensitive nature. In this review, we summarize the application of fluorescence spectroscopy for characterizing EPS and provide the potential implications for online monitoring of water quality along with its limitations. We also link the dynamics of fluorescent dissolved organic matter (FDOM) in EPS with operational and environmental changes in wastewater treatment systems as well as their associations with metal binding, membrane fouling, adsorption, toxicity, and dewaterability. The multiple modes of exploration of fluorescence spectra, such as synchronous spectra with or without coupling with two-dimensional correlation spectroscopy (2D-COS), excitation-emission matrix (EEM) deconvoluted fluorescence regional integration (FRI), and parallel factor analysis (PARAFAC) are also discussed. The potential fluorescence indicators to depict the composition and bulk characteristics of EPS are also of interest. Further studies are highly recommended to expand the application of fluorescence spectroscopy paired with appropriate supplementary techniques to fully unravel the underlying mechanisms associated with EPS.

Interpreting the role of NO3-, SO42-, and extracellular polymeric substances on aggregation kinetics of CeO2 nanoparticles: Measurement and modeling

The early stage of aggregation of cerium oxide nanoparticles (CeO₂ NPs) in anion solutions was inspected in the absence and presence of extracellular polymeric substance (EPS) with a help of time-resolved dynamic light scattering (DLS). The aggregation kinetics and attachment efficiencies were calculated according to measured hydrodynamic diameter across a range of 1-500 mM NaNO₃ and 0.01-100. mM Na₂SO₄. The aggregation of CeO₂ NPs in both NaNO₃ and Na₂SO₄ solution conformed with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. In NaNO₃ solution, the critical coagulation concentrations (CCC) of CeO₂ NPs was calculated to be about 47 mM; in Na₂SO₄ solution, CeO₂ NPs showed a re-stabilization process and thus there was no CCC value. SO₄^2- had intenser effects on CeO₂ NPs aggregation than NO₃^- might because of the distinction between their polarization, consisting in Hofmeister series. The presence of bound EPS (B-EPS), tightly bound EPS (TB-EPS) and loosely bound EPS (LB-EPS) in NaNO₃ solutions all lead to significant decrease in CeO₂ NPs aggregation. Steric repulsive force produced by absorbed EPS on CeO₂ NPs might take main responsibility in stabilizing CeO₂ NPs. Besides, Extended Derjaguin-Landau-Verwey-Overbeek (EDLVO) model successfully predicted the energy barrier between CeO₂ NPs with B-EPS, TB-EPS and LB-EPS as a function of NaNO₃ concentration. Furthermore, the difference in impeding the CeO₂ NPs aggregation with B-EPS, TB-EPS and LB-EPS may be caused by the divergence in molecular weight and component mass fraction especially protein content. These results might subserve the assessment on the fate and transport behaviors of CeO₂ NPs released in wastewater treatment plants.

The Influence of Residual Coagulant Al on the Biofilm EPS and Membrane Fouling Potential in Wastewater Reclamation

Biofouling is inevitable in wastewater reclamation when using membrane technology. In particular, the extracellular polymeric substances (EPS) from biofilm is a major contributor to biofouling. Coagulation is critical in the process of reusing wastewater before membrane treatment, and residual coagulants (e.g., Al salts) are able to alter the characteristics of the biofilm EPS. However, the distribution of residual Al across varying biofilm EPS fractions and its effect on the membrane fouling potential resulting from biofilm EPS remains unclear. We found that 34% of the residual Al was present in the soluble EPS (S-EPS), 26% in the loosely bound EPS (LB-EPS) and 40% in the tightly bound EPS (TB-EPS). Moreover, compared with the control groups, the residual Al in biofilm induced more biofilm formation and more EPS formation. Al reduced the zeta potential and increased the hydrophobicity of the EPS. These changes induced a significant rise in the membrane fouling potential of S-EPS and LB-EPS. This work provides coagulation support for wastewater reclamation using membrane technology.

Aluminium oxide nanoparticles inhibit EPS production, adhesion and biofilm formation by multidrug resistant Acinetobacter baumannii

Acinetobacter baumannii is a biofilm forming multidrug resistant (MDR) pathogen responsible for respiratory tract infections. In this study, aluminium oxide nanoparticles (Al₂O₃ NPs) were synthesized and characterized by TEM and EDX and shown to be spherical shaped nanoparticles with a diameter < 10 nm. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) for the Al₂O₃ NPs ranged between 125 and 1,000 µg ml^-1. Exposure to NPs caused cellular membrane disruption, indicated by an increase in cellular leakage of the contents. Biofilm inhibition was 11.64 to 70.2%, whereas attachment of bacteria to polystyrene surfaces was reduced to 48.8 to 51.9% in the presence of NPs. Nanoparticles also reduced extracellular polymeric substance production and the biomass of established biofilms. The data revealed the non-toxic nature of Al₂O₃ NPs up to a concentrations of 120 µg ml^-1 in HeLa cell lines. These results demonstrate an effective and safer use of Al₂O₃ NPs against the MDR A. baumannii by targeting biofilm formation, adhesion and EPS production.

Biofilm characteristics, microbial community structure and function of an up-flow anaerobic filter-biological aerated filter (UAF-BAF) driven by COD/N ratio

The biofilm characteristics, microbial community structure and function in a lab-scale up-flow anaerobic filter-biological aerated filter (UAF-BAF) driven by COD/N ratio were investigated. Results showed that the TN removal rate of system reduced from 68.7% to 50.6% with COD/N ratio ranging from 10 to 3. Biofilm characteristics analysis indicated that the biomass, biofilm thickness, polysaccharide and protein contents in extracellular polymeric substance and dehydrogenase activity from biofilm in the UAF-BAF declined with the decrease of COD/N ratio. The biofilm structure visualized by confocal laser scanning microscopy displayed that the total cells and EPS content decreased as the COD/N ratio downshifted. 16S rRNA sequencing illustrated that Zoogloea and Pleomorphomonas were the major contributors to TN removal in the UAF, with dramatically decreasing abundance. Functional prediction indicated that the genes involved in nitrogen metabolism and nitrate reductase (EC 1.7.99.4) also decreased, which was responsible for the decrease of TN removal. This study provided insights into understanding of the biofilm structure and underlying ecological function in the UAF-BAF, which would help to regulate wastewater biofilm and improve process performance.

Responses of nitrogen transformation processes and N2O emissions in biological nitrogen removal system to short-term ZnO nanoparticle stress

Although the adverse effects of ZnO nanoparticles (ZnO NPs) on biological nitrogen removal (BNR) processes have widely been reported, the impacts of ZnO NPs on the whole nitrogen transformation processes, especially the production of nitrous oxide (N₂O), a typical greenhouse gas in a BNR system have rarely been systematically studied yet. In this study, the performances of both the nitrification and denitrification processes were investigated and the N₂O emission was simultaneously monitored in a sequencing batch reactor (SBR) when exposed to 1, 25 or 50 mg/L ZnO NPs for one cycle. The dose-dependent ZnO NP depression effects were generally observed on denitrification processes, total nitrogen (TN) removal efficiency and N₂O emissions but not nitrification process. Meanwhile, the N₂O emission was positively correlated with NO₂^--N accumulation in the oxic stage. Further investigation showed that the expressions of nitrate (NO₃^-) reduction associated narG gene were down-regulated with the increase of NP stress, and the transcript ratios of NO₂^-/NO reduction gene to N₂O reduction one (nirK/nosZ and norB/nosZ) decreased. The released Zn²⁺ from ZnO NPs took an important role in the inhibition of denitrification processes. ZnO NPs addition also induced the dose-dependent variations in the superoxide dismutase (SOD) and catalase (CAT) activities, which probably contributed to the suppression of the excess reactive oxygen species (ROS) generations to mitigate nanotoxicity. The excessive secretion of protein (PN) in tightly bound EPS (TB-EPS) when ZnO NPs were no <25 mg/L further supported the system's potential self-regulation mechanism for nanotoxicity resistance. CAPSULE: The effects of ZnO NPs on the whole nitrogen transformation processes in a biological nitrogen removal sequencing batch reactor, including the N₂O emissions were investigated. The system's potential self-regulation mechanism for nanotoxicity resistance was addressed.

Characterization of sulfate-reducing bacteria anaerobic sludge granulation enhanced by chitosan

Two laboratory-scale up-flow anaerobic sludge granules reactors were operated as control reactor (R1) and chitosan (CTS) addition reactor (R2) to investigate the effect of the addition of CTS on the granulation process of sulfate-reducing bacteria (SRB) anaerobic sludge. Granular sludge with the diameter greater than 0.5 mm was selected to calculate the granulation percentage, and the remaining sludge was considered as flocculent sludge in this paper. The results showed that the granulation percentage in the two reactors were stabilized to 47.3% and 64.2%, respectively. The sizes of sludge granules in R2 were mainly between 0.5 and 1.5 mm with the average pore diameter of 91.6 nm and the porosity of 57.1% while the granules in the same particle size in R1 were 41.5 nm and 46.1%, respectively. It demonstrated that CTS was an appropriate additive which can enhance the formation of SRB granule sludge with better pore structure. The granular sludge with CTS exhibited excellent physical performance and more extracellular polymeric substances, especially for protein (PN). In addition, computational fluid dynamics (CFD) simulation was conducted to illustrate the hydrodynamic characteristics of granules with Kozeny-Carman model. With a higher porosity, the permeability of the granules fed with CTS was considerably increased. Moreover, the model also indicated that the permeability and convection changed significantly with Reynolds numbers (Re) of the external flow field for a given type of the porous structure.

Microstructure, bacterial community and metabolic prediction of multi-species biofilms following exposure to di-(2-ethylhexyl) phthalate (DEHP)

The occurrence and transportation of phthalate esters in biofilms from natural and engineered sources have attracted considerable research interest. However, little information is available highlighting the responses of multi-species biofilms in terms of their physicochemical structure and bacterial community induced by phthalate esters. Di-(2-ethylhexyl) phthalate (DEHP), a model phthalate eater, was selected to treat multi-species biofilm aggregates, including an attached biofilm from a moving bed bioreactor (MBBR), a periphytic biofilm from a natural source and activated sludge in short-term exposure experiments (120 h). The production of extracellular polymeric substances (EPS) from the three biofilms initially decreased and then slightly increased after exposure to DEHP, consistent with the variation of the most dominant fluorescent compounds consisting of humic-acid-like organic substances. The MBBR and periphytic biofilms secreted more fluorescence compounds than the activated sludge during the exposure period. The organic matter in the EPS was converted into smaller molecules, while limited variation was observed in the functional groups and secondary protein structures. Acinetobacter and Bacillus demonstrated significant increases and were likely the key genera responsible for DEHP degradation. The combined use of spectral, chromatographic and sequencing analyses indicated that the periphytic biofilm was more resistant to DEHP, possibly owing to the presence of more mature assemblages, including cells with higher metabolic activity and a higher diversity within the bacterial community. This study provides insights into the microstructural and bacterial responses of multi-species biofilms following exposure to phthalate esters, and provides important guidance for bioremediation of phthalate esters using periphytic biofilms.

Physicochemical and Biological Effects on Activated Sludge Performance and Activity Recovery of Damaged Sludge by Exposure to CeO2 Nanoparticles in Sequencing Batch Reactors

Recently, the growing release of CeO₂ nanoparticles (CeO₂ NPs) into sewage systems has attracted great concern. Several studies have extensively explored CeO₂ NPs' potential adverse impacts on wastewater treatment plants; however, the impaired activated sludge recovery potentials have seldom been addressed to date. To explore the physicochemical and biological effects on the activated sludge performance and activity recovery of damaged sludge by exposure to CeO₂ NPs in sequencing batch reactors (SBRs), four reactors and multiple indicators including water quality, key enzymes, microbial metabolites, the microbial community structure and toxicity were used. Results showed that 10-week exposure to higher CeO₂ NP concentration (1, 10 mg/L) resulted in a sharp decrease in nitrogen and phosphorus removal efficiencies, which were consistent with the tendencies of key enzymes. Meanwhile, CeO₂ NPs at concentrations of 0.1, 1, and 10 mg/L decreased the secretion of tightly bound extracellular polymeric substances to 0.13%, 3.14%, and 28.60%, respectively, compared to the control. In addition, two-week recovery period assays revealed that the functional bacteria Proteobacteria, Nitrospirae and Planctomycetes recovered slightly at the phyla level, as analyzed through high-throughput sequencing, which was consistent with the small amount of improvement of the effluent performance of the system. This reflected the small possibility of the activity recovery of damaged sludge.

The performance and microbial community in response to MnO2 nanoparticles in anammox granular sludge

The response of anaerobic ammonium oxidation (anammox) process and granular sludge in the upflow anaerobic sludge blanket reactor was analyzed under long-term exposure to MnO₂ nanoparticles (NPs) (1-200 mg L^-1). The addition of 200 mg L^-1 MnO₂ NPs had a significantly positive effect on nitrogen removal and this system exhibited excellent performance, with a total nitrogen removal efficiency of 93.1%. Moreover, the specific anammox activity enhanced with increasing concentrations of MnO₂ NPs up to the maximum value of 657.3 ± 9.3 mg TN g^-1 VSS d^-1 under MnO₂ NPs concentration of 200 mg L^-1. This value was approximately 1.6-fold higher than that of the reactor in the absence of MnO₂ NPs. The extracellular polymeric substances and settling velocity were both increased with MnO₂ NPs addition. Meanwhile, the high-throughput sequencing results revealed that MnO₂ NPs increased the relative abundance of dominant bacteria (Candidatus Kuenenia) from 17.3% at the absence of MnO₂ NPs to 23.9% at 200 mg L^-1 MnO₂ NPs, which resulted in a higher efficiency of biological nitrogen removal on the anammox system. These results indicated that MnO₂ NPs enhanced nitrogen removal performance of anammox process.

Effect of Increased Influent COD on Relieving the Toxicity of CeO2 NPs on Aerobic Granular Sludge

Due to the increased use of cerium oxide nanoparticles (CeO₂ NPs), their potential environmental risks have caused concern. However, their effects on the aerobic granular sludge (AGS) process and the later recovery of AGS are still unclear. In this study, we comprehensively determined the changes in pollutant removal and the levels of extracellular polymeric substances (EPS) in AGS that were exposed to CeO₂ NP treatments (0 (the control, R0), 1 (R1), and 5 (R5) mg/L), following an increase in the influent chemical oxygen demand (COD). An increase in the CeO₂ NP concentration enhanced their inhibitory effect on the removal of total nitrogen (TN) and total phosphorus (TP), and promoted the production of polysaccharides (PS) and proteins (PN) in loosely bound EPS (LB-EPS) or tightly bound EPS (TB-EPS), as well as the dissolved organic carbon (DOC) components in EPS, but had no long-term effects on the removal of organic matter. When the addition of CeO₂ NPs was stopped and the concentration of influent COD increased, the TN and TP removal efficiencies in R1 and R5 slowly increased and recovered. In R1, they were only 4.55 ± 0.55% and 2.71 ± 0.58% lower than in R0, respectively, while the corresponding values for R5 were 5.06 ± 0.46% and 6.20 ± 0.63%. Despite the LB-EPS and TB-EPS concentrations in the R1 and R5 treatments recovering and being similar to the levels in the control when no CeO₂ NPs were added, they were still slightly higher than in the R0, which indicating that the negative effects of CeO₂ NPs could not be completely eliminated due to the residual CeO₂ NP levels in AGS.

Effects of biochar on the phenol treatment performance and microbial communities shift in sequencing batch reactors

The extensive application of biochar (BC) attracts concerns regarding its environmental effect. Wastewater treatment systems are potential BC recipients; however, the impacts of BC on these systems are still unclear. In this study, effects of BC on the phenol treatment performance and shift in microbial communities in sequencing batch reactor (SBR) were investigated. The phenol degradation rates were enhanced in all BC-treated SBRs during the whole operation due to promotion of key enzymes involved in phenol degradation. The decrease in abundance of intracellular reactive oxygen species (ROS) in SBRs indicated that BC protected microorganisms by ameliorating phenol toxicity, leading to a decrease in the secretion of extracellular polymeric substances (EPS). The functional groups, protein (C=O, -CO-NH), polysaccharide (C-OH, C-O-C, C-O), and nucleic acids (O-P-O) associated bonds of EPS decreased or disappeared in BC-treated SBRs. Miseq sequencing revealed significant decrease in bacterial diversity and remarkable changes in the bacterial community structure in BC-treated SBRs. Abundances of Comamonas and Cupriavidus increased significantly upon BC exposure, which contributed to phenol degradation. Treatment with relatively high BC dosage exhibited considerable inhibition on Thauera. Canonical correspondence analysis (CCA) indicated that the shift in abundances of these genera was closely associated with BC dosage. This study suggested that BC exerted protective effects on sludge microbes of phenol wastewater treatment systems, while it affected the bacterial community structure and diversity at test concentrations. Thus, this study elucidates the comprehensive effects of BC on wastewater treatment process.

Effects of titanium dioxide nanoparticles on algal and bacterial communities in periphytic biofilms

The widespread application of commercial TiO₂ NPs inevitably leads to their release into environmental waters through various ways. TiO₂ NPs released into water might be absorbed by and react with periphytic biofilms, which are a kind of aquatic environmental media of important ecological significance, and influence the physiological activity and ecological function of periphytic biofilms. This study investigated the effects of exposure to 1 mg/L and 5 mg/L of TiO₂ NPs on periphytic biofilms cultured indoors. After a 10-day exposure to TiO₂ NPs, the growth (measured by chlorophyll-a content) of microalgal community was inhibited greatly (more than 60%); however, the primary production (indicated by quantum yield) of periphytic biofilms maintained changeless. As for bacteria, TiO₂ NP-exposure increased the bacterial diversity and altered the composition structure. Significant changes were observed in the bacterial communities at the class level, mainly including Alphaproteobacteria, Gammaproteobacteria, Cytophagia, Flavobacteriia, Sphingobacteriia, Synechococcophycideae and Oscillatoriophycideae. The enhancement of metabolic activities (the production of extracellular polymeric substances, especially proteins content increased by 48.51%) of periphytic biofilms was a resistance mechanism to toxicity of NPs. As for extracellular enzyme activities of periphytic biofilms, alkaline phosphatase activity was inhibited (22.43%) after exposed to 5 mg/L of TiO₂ NPs, which posed a threat to phosphorus metabolism of periphytic biofilms. Overall, this study demonstrated that 1 mg/L and 5 mg/L of TiO₂ NPs negatively influenced physiological activities and ecological functions of periphytic biofilms, highlighting that the ecological risks of TiO₂ NPs should be paid attention to.

Insights into the effect of nickel (Ni(II)) on the performance, microbial enzymatic activity and extracellular polymeric substances of activated sludge

The performance, nitrogen removal rate, microbial enzymatic activity and extracellular polymeric substances (EPS) of activated sludge were assessed under nickel (Ni(II)) stress. The organic matter and NH₄⁺-N removal efficiencies were stable at less than 10 mg/L Ni(II) and subsequently decreased with the increment of Ni(II) concentration from 10 to 30 mg/L. The specific oxygen uptake rate and dehydrogenase activity kept stable at less than 5 mg/L Ni(II) and then declined at 5-30 mg/L Ni(II). Both specific ammonia-oxidizing rate (SAOR) and specific nitrite-oxidizing rate (SNOR) decreased with the increment of Ni(II) concentration. The changing trends of ammonia monooxygenase and nitrite oxidoreductase activities were matched those of SAOR and SNOR, respectively. The nitrite-reducing rate and nitrate-reducing rate illustrated a similar variation tendency to the nitrite reductase activity and nitrate reductase activity, respectively. Ni(II) impacted on the production, chemical composition and functional group of EPS. The relation between the sludge volume index and the EPS production exhibited a better linear function with a negative slope, demonstrating that Ni(II) improved the sludge settleability despite of the increase of EPS production.

Biofilms: The Microbial "Protective Clothing" in Extreme Environments

Microbial biofilms are communities of aggregated microbial cells embedded in a self-produced matrix of extracellular polymeric substances (EPS). Biofilms are recalcitrant to extreme environments, and can protect microorganisms from ultraviolet (UV) radiation, extreme temperature, extreme pH, high salinity, high pressure, poor nutrients, antibiotics, etc., by acting as "protective clothing". In recent years, research works on biofilms have been mainly focused on biofilm-associated infections and strategies for combating microbial biofilms. In this review, we focus instead on the contemporary perspectives of biofilm formation in extreme environments, and describe the fundamental roles of biofilm in protecting microbial exposure to extreme environmental stresses and the regulatory factors involved in biofilm formation. Understanding the mechanisms of biofilm formation in extreme environments is essential for the employment of beneficial microorganisms and prevention of harmful microorganisms.

Accelerated productions and physicochemical characterizations of different extracellular polymeric substances from Chlorella vulgaris with nano-ZnO

Extracellular polymeric substances (EPS) play significant roles in protecting cells against environmental stresses. However, little information is known about the roles of different EPS in these processes. In this study, the productions and physicochemical characterizations of soluble-EPS (S-EPS) and bound-EPS (B-EPS), the two different fractions of EPS from a green alga Chlorella vulgaris under the stress of ZnO nanoparticle (nano-ZnO) were investigated. The contents of S-EPS and B-EPS which described as dissolved organic carbon, polysaccharides and proteins, both increased with the addition of tested nano-ZnO (0.01 and 0.04 mM) in a 72 h cultivation. EPS-Free (EPS-F) cells produced more S-EPS and B-EPS than the EPS-Cover (EPS-C) cells did with the tested nano-ZnO, especially the contents of protein in the S-EPS of EPS-F cells increased by 45.5% with 0.04 mM nano-ZnO compared to the control at 72 h. Tryptophan-like substances of the protein in S-EPS exhibited a stronger chemical static quenching than tyrosine-like substances with nano-ZnO. In addition, the hydroxyl (OH) as well as carboxyl (CO) group, and CO of amide I, NH/CN of amide II groups in proteins were confirmed that involved in the reaction of S-EPS and B-EPS with nano-ZnO, meanwhile hemiacetal groups in saccharides were oxidized to carboxyl groups. This study could provide a better understanding of EPS in protecting against cells damage with nanoparticles.

A review on the interactions between engineered nanoparticles with extracellular and intracellular polymeric substances from wastewater treatment aggregates

Engineered nanoparticles (ENPs) will inevitably enter wastewater treatment plants (WWTPs) due to their widespread application; thus, it is necessary to study the migration and transformation of nanoparticles in sewage treatment systems. Extracellular polymeric substances (EPSs) such as polysaccharides, proteins, nucleic acids, humic acids and other polymers are polymers released by microorganisms under certain conditions. Intracellular polymeric substances (IPSs) are microbial substances contained in the body with compositions similar to those of extracellular polymers. In this review, we summarize the characteristics of EPSs and IPSs from sewage-collecting microbial aggregates containing pure bacteria, activated sludge, granular sludge and biofilms. We also further investigate the dissolution, adsorption, aggregation, deposition, oxidation and other chemical transformation processes of nanoparticles, such as metals, metal oxides, and nonmetallic oxides. In particular, the review deeply analyzes the migration and transformation mechanisms of nanoparticles in EPS and IPS matrices, including physical, chemical, biological interactions mechanisms. Moreover, various factors, such as ionic strength, ionic valence, pH, light, oxidation-reduction potential and dissolved oxygen, influencing the interaction mechanisms are discussed. In recent years, studies on the interactions between EPSs/IPSs and nanoparticles have gradually increased, but the mechanisms of these interactions are seldom explored. Therefore, developing a systematic understanding of the migration and transformation mechanisms of ENPs is significant.

Effects of cerium oxide nanoparticles on bacterial growth and behaviors: induction of biofilm formation and stress response

In this paper, the effects of cerium oxide nanoparticles (CeO₂ NPs) on the group bacterial behaviors were elaborated. After 36-h cultivation, the biofilm biomass was enhanced by the sub-lethal concentrations of 0.5 and 2 mg/L CeO₂ NP exposure. Meanwhile, the promoted production of total amino acids in microbes further resulted in the increased surface hydrophobicity and percentage aggregation. To resist the CeO₂ NPs stress, the biofilm exhibited a double-layer microstructure, with the protein (PRO) and living cells occupying the bottom, the polysaccharide (PS), and dead cells dominating the top. The bacterial diversity was highly suppressed and Citrobacter and Pseudomonas from the phylum of γ-Proteobacteria strongly dominated the biofilm, indicating the selective and enriched effects of CeO₂ NPs on resistant bacteria. The stimulated inherent resistance of biofilm was reflected by the reduced adenosine triphosphate (ATP) content after 4 h exposure. The increased levels of reactive oxygen species (ROS) in the treatments of 8 h CeO₂ NP exposure led to the upregulated quorum sensing signals of acylated homoserine lactone (AHL) and autoinducer 2 (AI-2), beneficial to mitigating the environmental disturbance of CeO₂ NPs. These results provide evidences for the accelerating effects of CeO₂ NPs on biofilm formation through oxidative stress, which expand the understanding of the ecological effects of CeO₂ NPs.

Response of microorganisms in biofilm to sulfadiazine and ciprofloxacin in drinking water distribution systems

Effects of sulfadiazine and ciprofloxacin on microorganisms in biofilm of drinking water distribution systems (DWDSs) were studied. The results verified that the increases of 16S rRNA for total bacteria and bacterial genus Hyphomicrobium were related to the promotion of antibiotic resistance genes (ARGs) and class 1 integrons (int1) in DWDSs with sulfadiazine and ciprofloxacin. Moreover, the bacteria showed higher enzymatic activities in DWDSs with sulfadiazine and ciprofloxacin, which resulted in more production of extracellular polymeric substances (EPS). The higher contents of EPS proteins and secondary structure β-sheet promoted bacterial aggregation and adsorption onto surface of pipelines to form biofilm. EPS can serve as a barrier for the microorganisms in biofilm. Therefore, the biofilm bacterial communities shifted and the 16S rRNA for total bacteria increased in DWDSs with antibiotics, which also drove the ARGs promotion. Furthermore, the two antibiotics exhibited stronger combined effects than that caused by sulfadiazine and ciprofloxacin alone.