Continuous propionic acid production with Propionibacterium acidipropionici immobilized in a novel xylan hydrogel matrix

Reprocessing of side-streams towards obtaining valuable bacterial metabolites

Every year, all over the world, the industry generates huge amounts of residues. Side-streams are most often used as feed, landfilled, incinerated, or discharged into sewage. These disposal methods are far from perfect. Taking into account the composition of the side-streams, it seems that they should be used as raw materials for further processing, in accordance with the zero-waste policy and sustainable development. The article describes the latest achievements in biotechnology in the context of bacterial reprocessing of residues with the simultaneous acquisition of their metabolites. The article focuses on four metabolites - bacterial cellulose, propionic acid, vitamin B12 and PHAs. Taking into account global trends (e.g. food, packaging, medicine), it seems that in the near future there will be a sharp increase in demand for this type of compounds. In order for their production to be profitable and commercialised, cheap methods of its obtaining must be developed. The article, in addition to obtaining these bacterial metabolites from side-streams, also discusses e.g. factors affecting their production, metabolic pathways and potential and current applications. The presented chapters provide a complete overview of the current knowledge on above metabolites, which can be helpful for the academic and scientific communities and the several industries. KEY POINTS: • The industry generates millions of tons of organic side-streams each year. • Generated residues burden the natural environment. • A good and cost-effective method of side-streams management seems to be biotechnology - reprocessing with the use of bacteria. • Biotechnological disposal of side-streams gives the opportunity to obtain valuable compounds in cheaper ways: BC, PA, vitmain B12, PHAs.

Fermentation strategies to improve propionic acid production with propionibacterium ssp.: a review

Propionic acid (PA) is a carboxylic acid applied in a variety of processes, such as food and feed preservative, and as a chemical intermediate in the production of polymers, pesticides and drugs. PA production is predominantly performed by petrochemical routes, but environmental issues are making it necessary to use sustainable processes based on renewable materials. PA production by fermentation with the Propionibacterium genus is a promising option in this scenario, due to the ability of this genus to consume a variety of renewable carbon sources with higher productivity than other native microorganisms. However, Propionibacterium fermentation processes present important challenges that must be faced to make this route competitive, such as: a high fermentation time, product inhibition and low PA final titer, which increase the cost of product recovery. This article summarizes the state of the art regarding strategies to improve PA production by fermentation with the Propionibacterium genus. Firstly, strategies associated with environmental fermentation conditions and nutrition requirements are discussed. Subsequently, advantages and disadvantages of various strategies proposed to improve process performance (high cell concentration by immobilization or recycle, co-culture fermentation, genome shuffling, evolutive and metabolic engineering, and in situ recovery) are evaluated.

High Cell Density Culture of Dairy Propionibacterium sp. and Acidipropionibacterium sp.: A Review for Food Industry Applications

The dairy bacteria Propionibacterium sp. and Acidipropionibacterium sp. are versatile and potentially probiotic microorganisms showing outstanding functionalities for the food industry, such as the production of propionic acid and vitamin B₁₂ biosynthesis. They are the only food grade microorganisms able to produce vitamin B₁₂. However, the fermentation batch process using these bacteria present some bioprocess limitations due to strong end-product inhibition, cells slow-growing rates, low product titer, yields and productivities, which reduces the bioprocess prospects for industrial applications. The high cell density culture (HCDC) bioprocess system is known as an efficient approach to overcome most of those problems. The main techniques applied to achieve HCDC of dairy Propionibacterium are the fed-batch cultivation, cell recycling, perfusion, extractive fermentation, and immobilization. In this review, the techniques available and reported to achieve HCDC of Propionibacterium sp. and Acidipropionibacterium sp. are discussed, and the advantages and drawbacks of this system of cultivation in relation to biomass formation, vitamin B₁₂ biosynthesis, and propionic acid production are evaluated.

Transcriptomics and Proteomics Analyses of the Responses of Propionibacterium acidipropionici to Metabolic and Evolutionary Manipulation

We first performed a combination of metabolic engineering (deletion of ldh and poxB and overexpression of mmc) with evolutionary engineering (selection under oxygen stress, acid stress and osmotic stress) in Propionibacterium acidipropionici. The results indicated that the mutants had superior physiological activity, especially the mutant III obtained from P. acidipropionici-Δldh-ΔpoxB+mmc by evolutionary engineering, with 1.5-3.5 times higher growth rates, as well as a 37.1% increase of propionic acid (PA) titer and a 37.8% increase PA productivity compared to the wild type. Moreover, the integrative transcriptomics and proteomics analyses revealed that the differentially expressed genes (DEGs) and proteins (DEPs) in the mutant III were involved in energy metabolism, including the glycolysis pathway and tricarboxylic acid cycle (TCA cycle). These genes were up-regulated to supply increased amounts of energy and precursors for PA synthesis compared to the wild type. In addition, the down-regulation of fatty acid biosynthesis and fatty acid metabolism may indicate that the repressed metabolic flux was related to the production of PA. Quantitative reverse-transcription polymerase chain reaction (qRT-PCR) was performed to verify the differential expression levels of 16 selected key genes. The results offer deep insights into the mechanism of high PA production, which provides the theoretical foundation for the construction of advanced microbial cell factories.

Propionic Acid: Method of Production, Current State and Perspectives

During the past years, there has been a growing interest in the bioproduction of propionic acid by Propionibacterium. One of the major limitations of the existing models lies in their low productivity yield. Hence, many strategies have been proposed in order to circumvent this obstacle. This article provides a comprehensive synthesis and review of important biotechnological aspects of propionic acid production as a common ingredient in food and biotechnology industries. We first discuss some of the most important production processes, mainly focusing on biological production. Then, we provide a summary of important propionic acid producers, including Propionibacterium freudenreichii and Propionibacterium acidipropionici, as well as a wide range of reported growth/production media. Furthermore, we describe bioprocess variables that can have impact on the production yield. Finally, we propose methods for the extraction and analysis of propionic acid and put forward strategies for overcoming the limitations of competitive microbial production from the economical point of view. Several factors influence the propionic acid concentration and productivity such as culture conditions, type and bioreactor scale; however, the pH value and temperature are the most important ones. Given that there are many reports about propionic acid production from glucose, whey permeate, glycerol, lactic acid, hemicelluloses, hydrolyzed corn meal, lactose, sugarcane molasses and enzymatically hydrolyzed whole wheat flour, only few review articles evaluate biotechnological aspects, i.e. bioprocess variables.

3-phenyllactic acid production by free-whole-cells of Lactobacillus crustorum in batch and continuous fermentation systems

AIM

3-Phenyllactic acid (3-PLA) has been widely used in food and material industries. Three Lactobacillus crustorum strains have shown greater 3-PLA production ability in our previous study. The objectives of this study were to further improve 3-PLA yields in batch and continuous fermentation systems using of free-whole-cells of the three L. crustorum strains.

MATERIALS AND RESULTS

The fermentation conditions of free-whole-cells of the three L. crustorum strains for 3-PLA production were optimized. Among these strains, L. crustorum NWAFU 1078 showed excellent reusability and significantly (P < 0·05) greater 3-PLA production ability than the other strains after 10th recycle. The strain possesses three l-lactate dehydrogenase and three d-lactate dehydrogenase catalysing 3-PLA production from phenylpyruvic acid (PPA). Under the optimal conditions, the strain produced 15·2 mmol l^-1 3-PLA (76% PPA conversion rate) in a batch fermentation system and 6·5 mmol l^-1  h^-1 3-PLA (55% PPA conversion rate) in a continuous fermentation system using a 0·6 dilution rate.

CONCLUSIONS

Free-whole-cells of L. crustorum NWAFU 1078 showed excellent reusability and higher 3-PLA yields under optimal biotransformation conditions in both batch and continuous fermentation systems.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study provides the possibility to use the free-whole-cells of L. crustorum NWAFU 1078 as a biocatalyst for effective production of 3-PLA.

Protein and metabolic engineering for the production of organic acids

Organic acids are natural metabolites of living organisms. They have been widely applied in the food, pharmaceutical, and bio-based materials industries. In recent years, biotechnological routes to organic acids production from renewable raw materials have been regarded as very promising approaches. In this review, we provide an overview of current developments in the production of organic acids using protein and metabolic engineering strategies. The organic acids include propionic acid, pyruvate, itaconic acid, succinic acid, fumaric acid, malic acid and citric acid. We also expect that rapid developments in the fields of systems biology and synthetic biology will accelerate protein and metabolic engineering for microbial organic acid production in the future.

Current advances in biological production of propionic acid

Propionic acid and its derivatives are considered "Generally Recognized As Safe" food additives and are generally used as an anti-microbial and anti-inflammatory agent, herbicide, and artificial flavor in diverse industrial applications. It is produced via biological pathways using Propionibacterium and some anaerobic bacteria. However, its commercial chemical synthesis from the petroleum-based feedstock is the conventional production process bit results in some environmental issues. Novel biological approaches using microorganisms and renewable biomass have attracted considerable recent attention due to economic advantages as well as great adaptation with the green technology. This review provides a comprehensive overview of important biotechnological aspects of propionic acid production using recent technologies such as employment of co-culture, genetic and metabolic engineering, immobilization technique and efficient bioreactor systems.

High-purity propionate production from glycerol in mixed culture fermentation

High-purity propionate production from glycerol in mixed culture fermentation (MCF) induced by high ammonium concentration was investigated. Fed-batch experiments revealed that higher ammonium concentration (>2.9g/L) had simultaneous negative effects on acetate and propionate degradation. Propionate production and yield was up to 22.6g/L and 0.45g COD/g COD glycerol, respectively, with a purity of 96%. Sequential batch experiments demonstrated that the yields of propionate were 0.3±0.05, 0.32±0.01, and 0.34±0.03g COD/g COD at a glycerol concentration of 2.78, 4.38, and 5.56g/L, respectively, and the purity of propionate was 91-100%. Microbial community analysis showed that the phylum Firmicutes dominated the bacterial community at different glycerol concentrations. However, the Methanosaeta population decreased from 46% to 6% when glycerol concentration increased from 2.78 to 5.56g/L, resulting in lower acetate degradation rate. Thus, the present study might provide an alternative option for the production of propionate from glycerol via MCF.