Recovery of agricultural nutrients from biorefineries

Effects of biochar combined with MgO desulfurization waste residue on nitrogen conversion and odor emission in chicken manure composting

Aim: Chicken manure is known to produce strong odors during aerobic composting, which not only pollutes the surrounding environment but also leads to the loss of valuable nutrients like nitrogen and sulfur, thus reducing the quality of the fertilizer. Methods: In this study, we explored the use of biochar combined with MgO desulfurization waste residue (MDWR) as a novel composting additive. Our approach involved conducting composting tests, characterizing the compost samples, conducting pot experiments, and examining the impact of the additives on nitrogen retention, deodorization, and compost quality. Results: Our findings revealed that the addition of biochar and MDWR significantly reduced ammonia volatilization in chicken manure compost, demonstrating a reduction rate of up to 60.12%. Additionally, the emission of volatile organic compounds (VOCs) from chicken manure compost treated with biochar and MDWR decreased by 44.63% compared to the control group. Conclusions: The composting product treated with both biochar and MDWR (CMB) exhibited a 67.7% increase in total nitrogen (TN) compared to the blank control group, surpassing the other treatment groups and showcasing the synergistic effect of these two additives on nitrogen retention. Moreover, the CMB treatment facilitated the formation of struvite crystals. Furthermore, our pot experiment results demonstrated that the CMB treatment enhanced vegetable yield and quality while reducing nitrate content. These findings highlight the significant impact of MDWR on nitrogen retention, deodorization, and compost quality enhancement, thereby indicating its promising application prospects.

Simple and Low-Cost Electroactive Membranes for Ammonia Recovery

Ammonia is considered a contaminant to be removed from wastewater. However, ammonia is a valuable commodity chemical used as the primary feedstock for fertilizer manufacturing. Here we describe a simple and low-cost ammonia gas stripping membrane capable of recovering ammonia from wastewater. The material is composed of an electrically conducting porous carbon cloth coupled to a porous hydrophobic polypropylene support, that together form an electrically conductive membrane (ECM). When a cathodic potential is applied to the ECM surface, hydroxide ions are produced at the water-ECM interface, which transforms ammonium ions into higher-volatility ammonia that is stripped across the hydrophobic membrane material using an acid-stripping solution. The simple structure, low cost, and easy fabrication process make the ECM an attractive material for ammonia recovery from dilute aqueous streams, such as wastewater. When paired with an anode and immersed into a reactor containing synthetic wastewater (with an acid-stripping solution providing the driving force for ammonia transport), the ECM achieved an ammonia flux of 141.3 ± 14.0 g.cm^-2.day^-1 at a current density of 6.25 mA.cm^-2 (69.2 ± 5.3 kg(NH₃-N)/kWh). It was found that the ammonia flux was sensitive to the current density and acid circulation rate.

Pyrolysis-A tool in the wastewater solids handling portfolio, not a silver bullet: Benefits, drawbacks, and future directions

Pyrolysis is the process whereby carbonaceous materials, such as biosolids, are heated between 400°C and 900°C in the absence of oxygen. Three main products are generated: a solid product called biochar, a py-liquid that consists of aqueous phase and non-aqueous phase liquid, and py-gas. The biochar holds value as a beneficial soil amendment and sequesters carbon. The py-liquid is potentially hazardous and needs to be dealt with (including potentially reducing it on-site via catalysis or thermal oxidation). Py-gas can be used on-site for energy recovery. Pyrolysis has gained recent interest due to concern over per- and polyfluoroalkyl substances (PFAS) in biosolids. Although pyrolysis can remove PFAS from biosolids, it has been shown to produce PFAS that reside in py-liquid, and the fate in py-gas remains a knowledge gap. More research is needed to help close the PFAS and fluorine mass balance through pyrolysis influent and effluent products because pyrolysis alone does not destroy all PFAS. The moisture content of biosolids substantially affects the energy balance for pyrolysis. Utilities that already produce a dried biosolids product are in a better position to install pyrolysis. Pyrolysis has both defined benefits (solids reduction, PFAS removal from biosolids, and biochar production) as well as remaining questions (the fate of PFAS in py-gas and py-liquid, mass balance on nutrients, and py-liquid handling options) that will be answered through more pilot and full-scale demonstrations. Regulations and local policies (such as carbon sequestration credits) could affect pyrolysis implementation. Pyrolysis should be considered as an option in the biosolids stabilization toolbox with application being based on individual circumstances of a utility (e.g., energy, moisture content of biosolids, PFAS). PRACTITIONER POINTS: Pyrolysis has known benefits but limited full-scale operational data. Pyrolysis removes PFAS from biochar, but PFAS fate in gas phase is unknown. Moisture content of influent feed solids affects energy balance of pyrolysis. Policy on PFAS, carbon sequestration, or renewable energy could impact pyrolysis.

Biochar application as a soil potassium management strategy: A review

The established practices of intensive agriculture, combined with inadequate soil Κ replenishment by conventional inorganic fertilization, results in a negative environmental impact through the gradual exhaustion of different forms of K reserves in soils. Although biochar application as soil amendment has been established as an approach of integrated nutrient management, few works have focused on the impact of biochar application to soil K availability and crop uptake. This review provides an up-to-date analysis of the published literature, focusing on the impact of biochar in the availability of potassium in soil and crop growth. First, the effect of biomass type and pyrolysis temperature on potassium content of biochar was assessed. Second, the influence of biochar addition to the availability of potassium in soil and on potassium soil dynamics was examined. Finally, alternative methods for estimating available K in soils were proposed. The most promising biomasses in terms of potassium content were grape pomace, coffee husk and hazelnut husk however, these have not been widely utilized for biochar production. Higher pyrolysis temperatures (>500 °C) increase the total potassium content whereas lower temperatures increase the water-soluble and exchangeable potassium fractions. It was also determined that biochar has considerable potential for enhancing K availability through several distinct mechanisms which eventually lead directly or indirectly to increased K uptake by plants. Indirect mechanisms mainly include increased K retention capacity based on biochar properties such as high cation exchange capacity, porosity, and specific surface area, while the direct supply of K can be provided by K-rich biochar sources through purpose-made biochar production techniques. Research based on biochar applications for soil K fertility purposes is still at an early stage, therefore future work should focus on elucidating the mechanisms that define K retention and release processes through the complicated soil-biochar-plant system.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Biorefineries: Achievements and challenges for a bio-based economy

Climate change, socioeconomical pressures, and new policy and legislation are driving a decarbonization process across industries, with a critical shift from a fossil-based economy toward a biomass-based one. This new paradigm implies not only a gradual phasing out of fossil fuels as a source of energy but also a move away from crude oil as a source of platform chemicals, polymers, drugs, solvents and many other critical materials, and consumer goods that are ubiquitous in our everyday life. If we are to achieve the United Nations' Sustainable Development Goals, crude oil must be substituted by renewable sources, and in this evolution, biorefineries arise as the critical alternative to traditional refineries for producing fuels, chemical building blocks, and materials out of non-edible biomass and biomass waste. State-of-the-art biorefineries already produce cost-competitive chemicals and materials, but other products remain challenging from the economic point of view, or their scaled-up production processes are still not sufficiently developed. In particular, lignin's depolymerization is a required milestone for the success of integrated biorefineries, and better catalysts and processes must be improved to prepare bio-based aromatic simple molecules. This review summarizes current challenges in biorefinery systems, while it suggests possible directions and goals for sustainable development in the years to come.

Lab-scale data and microbial community structure suggest shortcut nitrogen removal as the predominant nitrogen removal mechanism in post-aerobic digestion (PAD)

Implementing an aerobic digestion step after anaerobic digestion, referred to as "post aerobic digestion" (PAD), can remove ammonia without the need for an external carbon source and destroy volatile solids. While this process has been documented at the lab-scale and full-scale, the mechanism for N removal and the corresponding microbial community that carries out this process have not been established. This research gap is important to fill because the nitrogen removal pathway has implications on aeration requirements and carbon demand, that is, short-cut N-removal requires less oxygen and carbon than simultaneous nitrification-denitrification. The aims of this research were to (i) determine if nitrite (NO₂ ^- ) or nitrate (NO₃ ^- ) dominates following ammonia removal and (ii) characterize the microbial community from PAD reactors. Here, lab-scale PAD reactors were seeded with biomass from two different full-scale PAD reactors. The lab-scale reactors were fed with biomass from full-scale reactors and operated in batch mode to quantify nitrogen species concentrations (ammonia, NH₄ ⁺ , NO₂ ^- , and NO₃ ^- ) over time. Experimental results revealed that NO₂ ^- production rates were several orders of magnitude greater than NO₃ ^- production rates. Indeed, nitrite accumulation rate (NAR) was greater than 90% at most temperatures, confirming that shortcut nitrogen removal was the dominant NH₄ ⁺ removal mechanism in PAD. Microbial community analysis via 16S rRNA sequencing indicated that ammonia oxidizing bacteria (AOB) were much more abundant than nitrite oxidizing bacteria (NOB). Overall, this study suggests that aeration requirements for post-aerobic digestion should be based on NO₂ ^- shunt and not complete simultaneous nitrification denitrification. PRACTITIONER POINTS: AOB are a key feature of PAD microbial communities NOB are present, but in much lower abundance than AOB High nitrite accumulation ratio suggests shortcut nitrite as the main mechanism for nitrogen removal Nitritation in PAD reactors is sustained at temperatures as high as 40°C No ammonia oxidation occurred at 50°C implying different mechanisms of nitrogen removal including ammonia stripping.

Phosphorus recovery from wastewater and bio-based waste: an overview

Phosphorus is one of the most important macronutrients needed for the growth of plants. The fertilizer production market uses 80% of natural, non-renewable phosphorus resources in the form of phosphate rock. The depletion of those deposits forces a search for other alternatives, including biological waste. This review aims to indicate the most important ways to recover phosphorus from biowaste, with particular emphasis on wastewater, sewage sludge, manure, slaughter or food waste. A comparison of utilized methods and directions for future research based on the latest research is presented. Combining biological, chemical, and physical methods with thermal treatment appears to be the most effective way for the treatment of wastewater sludge in terms of phosphorus recovery. Hydrothermal, thermochemical, and adsorption on thermally treated adsorbents are characterized by a high phosphorus recovery rate (over 95%). For animal by-products and other biological waste, chemical methods seems to be the most optimal solution with a recovery rate over 96%. Due to its large volume and relatively low phosphorus content, wastewater is a resource that requires additional treatment to recover the highest possible amount of phosphorus. Pretreatment of wastewater with combined methods seems to be a possible way to improve phosphorus recovery. A compressive evaluation of combined methods is crucial for future research in this area.

Development of a Culture Medium for Microalgae Production Based on Minimal Processing of Oil Palm Biomass Ash

With the increasing participation of biomass in the world energy matrix, large amounts of ash are produced through combustion, resulting in the need to dispose of this waste to minimize the environmental impact. An alternative is to use ashes as phosphorus supplements in microalgae cultures. The present work describes the development and use of a balanced culture medium based on the minimal processing of oil palm biomass ash to cultivate Arthrospira platensis Paracas, Neochloris oleoabundans UTEX 1185, and Dunaliella salina SAG 184. The acid extraction process of phosphorus (P) was defined by evaluating the following parameters: temperature (20 to 70 °C), acid load (0.01 to 0.03 mols/g of ash) of HNO3, and liquid/solid ratio (50 to 150 mLg−1). The best efficiency of the extraction process was 97%. The use of HNO3 allowed for the production of an extract containing balanced amounts of N and P sources, the BAX medium (Biomass Ash Extract). This medium was efficient for cultivating the three microorganisms studied, reaching biomass concentrations of 2.03, 0.902, and 0.69 g/L or 84%, 82%, and 99% of the control concentrations for A. platensis, N. Oleoabundans, and D. salina, respectively. In a final scaling-up test, A. platensis showed productivity of 0.047 g L−1d−1 in a 120 L tank in a greenhouse. BAX can be an alternative nutrient medium for microalgae cultivation, especially in integration with biomass-fueled biorefineries.

Ammonium and Phosphate Recovery in a Three Chambered Microbial Electrolysis Cell: Towards Obtaining Struvite from Livestock Manure

Ammonia and phosphate, which are present in large quantities in waste streams such as livestock manure, are key compounds in fertilization activities. Their recovery will help close natural cycles and take a step forward in the framework of a circular economy. In this work, a lab-scale three-chambered microbial electrolysis cell (MEC) has been operated in continuous mode for the recovery of ammonia and phosphate from digested pig slurry in order to obtain a nutrient concentrated solution as a potential source of fertilizer (struvite). The maximum average removal efficiencies for ammonium and phosphate were 20% ± 4% and 36% ± 10%, respectively. The pH of the recovered solution was below 7, avoiding salt precipitation in the reactor. According to Visual MINTEQ software modelling, an increase of pH value to 8 outside the reactor would be enough to recover most of the potential struvite (0.21 mmol L−1 d−1), while the addition of up to 0.2 mM of magnesium to the nutrient recovered solution would enhance struvite production from 5.6 to 17.7 mM. The application of three-chambered MECs to the recovery of nutrients from high strength wastewater is a promising technology to avoid ammonia production through industrial processes or phosphate mineral extraction and close nutrient natural cycles.

A Review on Occurrence and Spread of Antibiotic Resistance in Wastewaters and in Wastewater Treatment Plants: Mechanisms and Perspectives

This paper reviews current knowledge on sources, spread and removal mechanisms of antibiotic resistance genes (ARGs) in microbial communities of wastewaters, treatment plants and downstream recipients. Antibiotic is the most important tool to cure bacterial infections in humans and animals. The over- and misuse of antibiotics have played a major role in the development, spread, and prevalence of antibiotic resistance (AR) in the microbiomes of humans and animals, and microbial ecosystems worldwide. AR can be transferred and spread amongst bacteria via intra- and interspecies horizontal gene transfer (HGT). Wastewater treatment plants (WWTPs) receive wastewater containing an enormous variety of pollutants, including antibiotics, and chemicals from different sources. They contain large and diverse communities of microorganisms and provide a favorable environment for the spread and reproduction of AR. Existing WWTPs are not designed to remove micropollutants, antibiotic resistant bacteria (ARB) and ARGs, which therefore remain present in the effluent. Studies have shown that raw and treated wastewaters carry a higher amount of ARB in comparison to surface water, and such reports have led to further studies on more advanced treatment processes. This review summarizes what is known about AR removal efficiencies of different wastewater treatment methods, and it shows the variations among different methods. Results vary, but the trend is that conventional activated sludge treatment, with aerobic and/or anaerobic reactors alone or in series, followed by advanced post treatment methods like UV, ozonation, and oxidation removes considerably more ARGs and ARB than activated sludge treatment alone. In addition to AR levels in treated wastewater, it examines AR levels in biosolids, settled by-product from wastewater treatment, and discusses AR removal efficiency of different biosolids treatment procedures. Finally, it puts forward key-points and suggestions for dealing with and preventing further increase of AR in WWTPs and other aquatic environments, together with a discussion on the use of mathematical models to quantify and simulate the spread of ARGs in WWTPs. Mathematical models already play a role in the analysis and development of WWTPs, but they do not consider AR and challenges remain before models can be used to reliably study the dynamics and reduction of AR in such systems.

Gasification of Biomass in Supercritical Water, Challenges for the Process Design—Lessons Learned from the Operation Experience of the First Dedicated Pilot Plant

Gasification of organic matter under the conditions of supercritical water (T > 374 °C, p > 221 bar) is an allothermal, continuous flow process suitable to convert materials with high moisture content (<20 wt.% dry matter) into a combustible gas. The gasification of organic matter with water as a solvent offers several benefits, particularly the omission of an energy-intensive drying process. The reactions are fast, and mean residence times inside the reactor are consequently low (less than 5 min). However, there are still various challenges to be met. The combination of high temperature and pressure and the low concentration of organic matter require a robust process design. Additionally, the low value of the feed and the product predestinate the process for decentralized applications, which is a challenge for the economics of an application. The present contribution summarizes the experience gained during more than 10 years of operation of the first dedicated pilot plant for supercritical water gasification of biomass. The emphasis lies on highlighting the challenges in process design. In addition to some fundamental results gained from comparable laboratory plants, selected experimental results of the pilot plant “VERENA” (acronym for the German expression “experimental facility for the energetic exploitation of agricultural matter”) are presented.

Dual detection of biochemical oxygen demand and nitrate in water based on bidirectional Shewanella loihica electron transfer

This study for the first time proposed a method for simultaneously measuring BOD and nitrate in water using electrochemically active bacteria. Firstly, the bidirectional extracellular electron transfer (EET) capability of a model electricigen Shewanella loihica PV-4 was revealed. Then, based on the respective outward and inward EET, S. loihica PV-4 was utilized to detection BOD and nitrate. The results demonstrated a positive correlation between the outward EET and BOD (from 0 mg/L to 435 mg/L) while a negative correlation between the inward EET and nitrate (from 0 mg/L to 7 mg/L); both the relationships were well fitted by the combination of traditional linear model and Michaelis-Menten model (R²>0.96). Finally, a dual detection method for BOD and nitrate measurements was established based on the ano-cathodophilic capability of S. loihica PV-4 biofilm, and exhibited the characteristics of high accuracy (>80%) and fast analysis (<1h), suggesting a promising prospect in water monitoring.

Future Phosphorus: Advancing New 2D Phosphorus Allotropes and Growing a Sustainable Bioeconomy

With more than 40 countries currently proposing to boost their national bioeconomies, there is no better time for a clarion call for a "new" bioeconomy, which, at its core, tackles the current disparities and inequalities in phosphorus (P) availability. Existing biofuel production systems have widened P inequalities and contributed to a linear P economy, impairing water quality and accelerating dependence on P fertilizers manufactured from finite nonrenewable phosphate rock reserves. Here, we explore how the emerging bioeconomy in novel, value-added, bio-based products offers opportunities to rethink our stewardship of P. Development of integrated value chains of new bio-based products offers opportunities for codevelopment of "P refineries" to recover P fertilizer products from organic wastes. Advances in material sciences are exploiting unique semiconductor and opto-electrical properties of new "two-dimensional" (2D) P allotropes (2D black phosphorus and blue phosphorus). These novel P materials offer the tantalizing prospect of step-change innovations in renewable energy production and storage, in biomedical applications, and in biomimetic processes, including artificial photosynthesis. They also offer a possible antidote to the P paradox that our agricultural production systems have engineered us into, as well as the potential to expand the future role of P in securing sustainability across both agroecological and technological domains of the bioeconomy. However, a myriad of social, technological, and commercialization hurdles remains to be crossed before such an advanced circular P bioeconomy can be realized. The emerging bioeconomy is just one piece of a much larger puzzle of how to achieve more sustainable and circular horizons in our future use of P.

Realizing the Circular Economy for Sanitation: Assessing Enabling Conditions and Barriers to the Commercialization of Human Excreta Derived Fertilizer in Haiti and Kenya

Efficient fecal sludge management solutions are especially challenging in densely populated urban informal settlements, where space is limited and land tenure uncertain. One solution is to collect and treat human excreta to produce soil conditioners for use in agriculture, through container-based sanitation, thus realizing the circular economy for sanitation. This study focused on container-based sanitation ventures that produce and sell fertilizers from human excreta. Stakeholder interviews showed that challenges faced by these ventures were similar: unclear regulations on the use of fertilizers derived from source-separated excreta, undeveloped markets for organic fertilizers, difficulties in securing secondary sources of organic matter for composting as well as complex transport and distribution logistics. The findings of this study emphasized the need for clear policies with respect to human excreta derived fertilizer, as well as institutional involvement in order to incentivize the sale and use of human excreta derived fertilizer locally to ensure that sustainable and safely managed sanitation systems are available in urban areas.

Meta-analysis of non-reactive phosphorus in water, wastewater, and sludge, and strategies to convert it for enhanced phosphorus removal and recovery

Current and future trends indicate that mining of natural phosphorus (P) reserves is occurring faster than natural geologic replenishment. This mobilization has not only led to P supply concerns, but has also polluted many of the world's freshwater bodies and oceans. Recovery and reuse of this nuisance P offers a long-term solution simultaneously addressing mineral P accessibility and P-based pollution. Available physical, chemical, and biological P removal/recovery processes can achieve low total P (TP) concentrations (≤100 μg/L) and some processes can also recover P for direct reuse as fertilizers (e.g., struvite). However, as shown by our meta-analysis of over 20,000 data points on P quantity and P form, the P in water matrices is not always present in the reactive P (RP) form that is most amenable to recovery for direct reuse. Thus, strategies for removing and recovering other P fractions in water/wastewater are essential to provide environmental protection via P removal and also advance the circular P economy via P recovery. Specifically, conversion of non-reactive P (NRP) to the more readily removable/recoverable RP form may offer a feasible approach; however, extremely limited data on such applications currently exist. This review investigates the role of NRP in various water matrices; identifies NRP conversion mechanisms; and evaluates biological, physical, thermal, and chemical processes with potential to enhance P removal and recovery by converting the NRP to RP. This information provides critical insights into future research needs and technology advancements to enhance P removal and recovery.

Nutrient recovery from digested waste: Towards a generic roadmap for setting up an optimal treatment train

This paper aims to develop a generic roadmap for setting up strategies for nutrient recovery from digested waste (digestate). First, a guideline-based decision-tree is presented for setting up an optimal bio-based fertilization strategy as function of local agronomic and regulatory criteria. Next, guidelines and evaluation criteria are provided to determine the feasibility of bio-based fertilizer production as function of the input digestate characteristics. Finally, a conceptual decision making algorithm is developed aiming at the configuration and optimization of nutrient recovery treatment trains. Important input digestate characteristics to measure, and essential factors for monitoring and control are identified. As such, this paper provides a useful decision-support guide for wastewater and residuals processing utilities aiming to implement nutrient recovery strategies. This, in turn, may stimulate and hasten the global transition from wastewater treatment plants to water resource recovery facilities. On top of that, the proposed roadmap may help adjusting the choice of nutrient recovery strategies to local fertilizer markets, thereby speeding up the transition from a fossil-reserve based to a bio-based circular nutrient economy.

Deashing macroalgae biomass by pulsed electric field treatment

Among all biomass constituents, the ashes are major hurdles for biomass processing. Ashes currently have low market value and can make a non-negligible fraction of the biomass dry weight significantly impacting its further processing by degrading equipment, lowering process yield, inhibiting reactions and decreasing products qualities. However, most of the current treatments for deashing biomass are of poor efficiency or industrial relevance. This work is the first report on the use of Pulsed Electric Field (PEF) to enhance deashing of biomass from a high ash content green marine macroalga, Ulva sp., using hydraulic pressing. By inducing cell permeabilization of the fresh biomass, PEF was able to enhance the ash extraction from 18.4% (non-treated control) to 37.4% of the total ash content in average, significantly enhancing the extraction of five of the major ash elements (K, Mg, Na, P and S) compared to pressing alone.

Organic waste vermicomposting through the addition of rock dust inoculated with domestic sewage wastewater

The aims of the present study are to assess the organic waste vermicomposting process (cattle manure mixed with tannery sludge) by using inorganic waste (rock dust) inoculated with treated domestic wastewater sewage, as well as the vermicompost application in Ruellia brittoniana seedling production. Different proportions of organic and inorganic waste moistened (or not) in wastewater were vermicomposted (by Eisenia foetida) for 120 days in the first stage of the experiment. Statistically significant earthworm density increase was observed between the 60^th and 90^th experimental vermicompositing days in all the assessed groups. There was decreased E. foetida population density after 90 days. The K, P, TOC, C/N ratio and Ca, Na and Mg concentrations significantly decreased at the end of the vermicompositing process in comparison to the initial concentrations identified in most treatments. On the other hand, there was pH and N, Fe, Zn and Mn concentration increase in most of the vermicomposts assessed at the end of the experiment. All plants grown in soil containing vermicomposts presented higher Dickson Quality Index (DQI) than the control group, which was cultivated in soil containing commercial topsoil. Plants grown in soil containing 100% cattle manure and tannery sludge, moistened in treated domestic wastewater sewage, showed the highest DQI. Thus, the vermicomposting waste used in the present study, which was inoculated with treated domestic wastewater sewage, is an interesting vermicompost production technology to be used in ornamental plant production.

Total Value of Phosphorus Recovery

Phosphorus (P) is a critical, geographically concentrated, nonrenewable resource necessary to support global food production. In excess (e.g., due to runoff or wastewater discharges), P is also a primary cause of eutrophication. To reconcile the simultaneous shortage and overabundance of P, lost P flows must be recovered and reused, alongside improvements in P-use efficiency. While this motivation is increasingly being recognized, little P recovery is practiced today, as recovered P generally cannot compete with the relatively low cost of mined P. Therefore, P is often captured to prevent its release into the environment without beneficial recovery and reuse. However, additional incentives for P recovery emerge when accounting for the total value of P recovery. This article provides a comprehensive overview of the range of benefits of recovering P from waste streams, i.e., the total value of recovering P. This approach accounts for P products, as well as other assets that are associated with P and can be recovered in parallel, such as energy, nitrogen, metals and minerals, and water. Additionally, P recovery provides valuable services to society and the environment by protecting and improving environmental quality, enhancing efficiency of waste treatment facilities, and improving food security and social equity. The needs to make P recovery a reality are also discussed, including business models, bottlenecks, and policy and education strategies.