Co-generation of biohydrogen and biomethane through two-stage batch co-fermentation of macro- and micro-algal biomass

Carbon dioxide capture, sequestration, and utilization models for carbon management and transformation

The elevated level of carbon dioxide in the atmosphere has become a pressing concern for environmental health due to its contribution to climate change and global warming. Simultaneously, the energy crisis is a significant issue for both developed and developing nations. In response to these challenges, carbon capture, sequestration, and utilization (CCSU) have emerged as promising solutions within the carbon-neutral bioenergy sector. Numerous technologies are available for CCSU including physical, chemical, and biological routes. The aim of this study is to explore the potential of CCSU technologies, specifically focusing on the use of microorganisms based on their well-established metabolic part. By investigating these biological pathways, we aim to develop sustainable strategies for climate management and biofuel production. One of the key novelties of this study lies in the utilization of microorganisms for CO2 fixation and conversion, offering a renewable and efficient method for addressing carbon emissions. Algae, with its high growth rate and lipid contents, exhibits CO2 fixation capabilities during photosynthesis. Similarly, methanogens have shown efficiency in converting CO2 to methane by methanogenesis, offering a viable pathway for carbon sequestration and energy production. In conclusion, our study highlights the importance of exploring biological pathways, which significantly reduce carbon emissions and move towards a more environmentally friendly future. The output of this review highlights the significant potential of CCSU models for future sustainability. Furthermore, this review has been intensified in the current agenda for reduction of CO2 at considerable extends with biofuel upgrading by the microbial-shift reaction.

Algae: the game-changers in biohydrogen sector

Biohydrogen (H2) is an efficient form of renewable energy generated from various biological organisms. Specifically, primitive plants such as algae which are photosynthetic organisms can produce several commercial products, including biofuels due to their simple form, short life span, efficient photosynthetic capacity, and ability to grow in non-potable water sources. But these algae are often neglected and considered waste. Several studies have revealed the importance and role of algal species in generating biofuels, especially biohydrogen. Considerable research has been conducted in order to understand hydrogen production from algal sources. This review emphasizes the photolysis of water-based hydrogen production in algae apart from the metabolites fermentation process. The influence of physico-chemical factors, including oxygen scavengers, nanoparticles, and hydrogenases, was highlighted in this review to enhance H2 production from algal species. Also, several algal species used for hydrogen production are summarized in detail. Overall, this review intends to summarize the developments in hydrogen production from algal species keeping in view of excellent prospects. This knowledge certainly would provide a good opportunity for the industrial production of hydrogen using algal species, which is one of the most concerned areas in the energy sector.

Biohythane production via anaerobic digestion process: fundamentals, scale-up challenges, and techno-economic and environmental aspects

Biohythane, a balanced mixture comprising bioH2 (biohydrogen) and bioCH4 (biomethane) produced through anaerobic digestion, is gaining recognition as a promising energy source for the future. This article provides a comprehensive overview of biohythane production, covering production mechanisms, microbial diversity, and process parameters. It also explores different feedstock options, bioreactor designs, and scalability challenges, along with techno-economic and environmental assessments. Additionally, the article discusses the integration of biohythane into waste management systems and examines future prospects for enhancing production efficiency and applicability. This review serves as a valuable resource for researchers, engineers, and policymakers interested in advancing biohythane production as a sustainable and renewable energy solution.

Role of microalgae in achieving sustainable development goals and circular economy

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

A novel conversion of marine macroalgal biomass to biofuel (biohydrogen) via calcium hypochlorite induced dispersion

Environmental pollution due to the consumption of non-renewable energy lead the search for alternative eco-friendly renewable fuel. The study details the biohydrogen production efficiency by potential macroalgal (Ulva reticulata) biomass improved by a disperser combined with calcium hypochlorite pretreatment technology. Calcium hypochlorite was added to decrease the surface energy of the medium induced by sole disperser pretreatment. Optimum condition for algal disperser treatment was 10,000 rpm with 30 min as dispersion time. The specific energy spent for the disintegration of the macroalgal biomass was 1231.58 kJ/kg TS. COD solubilization rate of 11.79% was attained with mechanical pretreatment whereas increased to 20.23% with combined pretreatment. Combination of disperser with calcium hypochlorite significantly reduced the specific energy input spent to 500 kJ/kg TS. The amount of organic materials such as carbohydrates, proteins and lipids released were 680 mg/L, 283 mg/L and 136 mg/L respectively. Thus, the combinative pretreatment with disperser rotor speed (10,000 rpm) for pretreatment time (12 min) and calcium hypochlorite dosage (0.1 g/g) derived as optimum condition for effective solubilization of macroalgal biomass. Biohydrogen production potential was maximum in the macroalgae pretreated with both disperser and calcium hypochlorite recorded highest yield (54.6 mL H₂/g COD) compared to the macroalgae pretreated with disperser alone (31.7 mL H₂/g COD) and untreated macroalgae (11.5 mL H₂/g COD).

Microbial electrochemical degradation of lipids for promoting methane production in anaerobic digestion

In order to solve problems of low methane production from lipids in anaerobic digestion, microbial electrochemical degradation was proposed to promote methane yield of glycerol trioleate (a typical lipid component of food waste). The beta-oxidation of lipids was strengthened with an applied voltage to promote electron transfer and anaerobic digestion. SEM images showed that a lot of spherical and rod-shaped microbes adhered to electrode surfaces. Cyclic voltammetry showed that electron transfer rate constant at 0.8 V was 14.4-fold that at 0 V. Three-dimensional fluorescence spectroscopy showed that small organic degraded molecules were used more efficiently in anaerobic digestion. The methane yield of glycerol trioleate increased to 791.6 mL/g-TVS (at 0.8 V), while methane production peak rate increased to 26.8 mL/g-TVS/d with a shortened peak time to 24th day. The overall energy conversion efficiency in methane production increased from 53.6 to 60.1% due to microbial electrochemical degradation of lipids.

Algae as potential feedstock for various bioenergy production

Depletion of non-renewable feedstock and severe wastewater pollution due to human activities have created negative impact to living organisms. The potential solution is to implement wastewater treatment and bioelectricity production through algae-based microbial fuel cell. The algae biomass produced from microbial fuel cell could be further processed to generate biofuels through their unique compositions. The consumption of nutrients in wastewater through algae cultivation and biomass produced to be utilized for energy supply have showed the potential of algae to solve the issues faced nowadays. This review introduces the background of algae and mitigation of wastewater using algae as well as the bioenergy status in Malaysia. The mechanisms of nutrient assimilation such as nitrogen, phosphorus, carbon, and heavy metals are included, followed by the application of algae in microbial fuel cell's chambers. Lastly, the status of algae for bioenergy production are covered.

Co-generation of biohydrogen and biochemicals from co-digestion of Chlorella sp. biomass hydrolysate with sugarcane leaf hydrolysate in an integrated circular biorefinery concept

BACKGROUND

A platform for the utilization of the Chlorella sp. biomass and sugarcane leaves to produce multiple products (biorefinery concept) including hydrogen, methane, polyhydroxyalkanoates (PHAs), lipid, and soil supplement with the goal to achieve the zero waste generation (circular economy) is demonstrated in this study. Microalgal biomass were hydrolyzed by mixed enzymes while sugarcane leaves were pretreated with alkali followed by enzyme. Hydrolysates were used to produce hydrogen and the hydrogenic effluent was used to produce multi-products. Solid residues at the end of hydrogen fermentation and the remaining acidified slurries from methane production were evaluated for the compost properties.

RESULTS

The maximum hydrogen yield of 207.65 mL-H₂/g-volatile solid (VS)_added was obtained from 0.92, 15.27, and 3.82 g-VS/L of Chlorella sp. biomass hydrolysate, sugarcane leaf hydrolysate, and anaerobic sludge, respectively. Hydrogenic effluent produced 321.1 mL/g-VS of methane yield, 2.01 g/L PHAs concentration, and 0.20 g/L of lipid concentration. Solid residues and the acidified slurries at the end of the hydrogen and methane production process were proved to have compost properties.

CONCLUSION

Hydrogen production followed by methane, PHA and lipid productions is a successful integrated circular biorefinery platform to efficiently utilize the hydrolysates of Chlorella sp. biomass and sugarcane leaf. The potential use of the solid residues at the end of hydrogen fermentation and the remaining acidified slurries from methane production as soil supplements demonstrates the zero waste concept. The approach revealed in this study provides a foundation for the optimal use of feedstock, resulting in zero waste.

Emerging technologies for conversion of sustainable algal biomass into value-added products: A state-of-the-art review

Concerns regarding high energy demand and gradual depletion of fossil fuels have attracted the desire of seeking renewable and sustainable alternatives. Similar to but better than the first- and second-generation biomass, algae derived third-generation biorefinery aims to generate value-added products by microbial cell factories and has a great potential due to its abundant, carbohydrate-rich and lignin-lacking properties. However, it is crucial to establish an efficient process with higher competitiveness over the current petroleum industry to effectively utilize algal resources. In this review, we summarize the recent technological advances in maximizing the bioavailability of different algal resources. Following an overview of approaches to enhancing the hydrolytic efficiency, we review prominent opportunities involved in microbial conversion into various value-added products including alcohols, organic acids, biogas and other potential industrial products, and also provide key challenges and trends for future insights into developing biorefineries of marine biomass.

A sodium percarbonate/ultraviolet system generated free radicals for degrading capsaicin to alleviate inhibition of methane production during anaerobic digestion of lipids and food waste

To alleviate inhibition of anaerobic digestion caused by capsaicin, which is easily soluble in the lipid components of food waste (FW), an advanced oxidation process with sodium percarbonate/ultraviolet (SPC/UV) was used to generate free radicals for degrading capsaicin and recovering methane production. Free radical sweeping showed that the free radicals OH, O₂^- and CO₃^- worked together to degrade capsaicin. Gas chromatography-mass spectrometry showed that capsaicin likely had four degradation pathways via conversion into benzoquinone, and finally into carbon dioxide and water. The degradation rate of capsaicin in lipids increased from 62.2% to 96.0% when the SPC concentration increased from 2 mmol/L to 32 mmol/L (UV intensity = 20.66 mW/cm²). The degradation rate increased from 70.9% to 94.6% when the UV intensity increased from 20.66 mW/cm² to 46.86 mW/cm² (SPC concentration = 4 mmol/L). The subsequent products after capsaicin degradation were subjected to anaerobic digestion either directly or by adding FW. The reduced intracellular oxidative kinases of anaerobic digestion microorganisms recovered the CH₄ yield from 27.2 mL/g-total volatile solids (TVS) with capsaicin to 311.2 mL/g-TVS with degraded capsaicin, which was 40.7% that of the control group (765.3 mL/g-TVS without capsaicin). After adding FW, the CH₄ yield of SPC/UV degradation effluent was 504.1 mL/g-TVS, which was 82.6% that of the control group (610.4 mL/g-TVS).

Valorization of microalgal biomass for biohydrogen generation: A review

Third generation biomass, i.e. microalgae, has emerged as a promising alternative to first and second generation biomass for biohydrogen production. However, its utilization is still low at present, due to several reasons including the strong and rigidity of the microalgal cell wall that limit the hydrolysis efficiency during dark fermentation (DF) and photofermentation (PF) processes. To improve the utilization efficiency of microalgal biomass, it is crucial that important aspects related to the production of the biomass and the following processes are elaborated. Thus, this article provides detailed overview of algal strains, cultivation, and harvesting. It also presents recent research and detailed information on microalgal biomass pretreatment, and biohydrogen production through DF, PF, and co-digestion of microalgal biomass with organic materials. Furthermore, factors affecting fermentation processes performance and the use of molecular techniques in biohydrogen production are presented. This review also discusses challenges and future prospects towards biohydrogen production from microalgal biomass.

Inhibition of N-Vanillylnonanamide in anaerobic digestion of lipids in food waste: Microorganisms damage and blocked electron transfer

To study the inhibited degradation metabolism and anaerobic digestion of typical lipids in food waste, an artificially produced capsaicin, N-Vanillylnonanamide, a typical soluble component in waste lipids, was added to a glycerol trioleate anaerobic digestion system. The microorganisms damage and blocked electron transfer caused by N-Vanillylnonanamide during anaerobic digestion were further clarified. Scanning electron microscopy and transmission electron microscopy images demonstrated that N-Vanillylnonanamide (≥4 wt%) structurally damaged microorganisms via cell membrane breakage, which impair their function. N-Vanillylnonanamide inhibited the activities of the key enzyme CoA, AK, F₄₂₀, and CoM, which are relevant for both degradation metabolism and anaerobic digestion. 16S rRNA analysis showed that dominant bacterial and archaeal communities markedly decreased after anaerobic digestion of glycerol trioleate with N-Vanillylnonanamide (≥4 wt%). For example, the proportion of Methanosarcina decreased from 30 % to 6 %. Current-voltage curves indicated that the electron transfer rate in the community of microorganisms decreased by 99 % from 4.67 × 10^-2 to 5.66 × 10^-4 s^-1 in response to N-Vanillylnonanamide (40 wt%). The methane yield during anaerobic digestion of glycerol trioleate decreased by 84.0 % from 780.21-142.10 mL/g-total volatile solids with N-Vanillylnonanamide (40 wt%).

Hydrothermal alkali pretreatment contributes to fermentative methane production of a typical lipid from food waste through co-production of hydrogen with methane

In order to relieve the suppression problems of methanogenesis with microorganisms surrounded by undegraded lipids in food waste, hydrothermal alkali pretreatment was utilized to degrade lipids for promoted methane production through the co-production process of hydrogen with methane. GC-MS results demonstrated that oleic acids and hexadecanoic acids derived from degraded glycerol trioleate increased (from 43.29% to 58.22%, and from 1.06% to 8.25%, respectively) when the pretreatment temperature was increased from 160 °C to 220 °C. SEM, TEM and FTIR analyses showed that the pre-treatment at 220 °C effectively degraded 87.56% of glycerol trioleate and drastically relieved the covering of methanogens by non-degraded lipids. The methane yield and the production peak rate of glycerol trioleate also increased (from 636.85 to 877.47 mL CH4/g-total volatile solid (VS), and from 32.60 to 51.22 mL CH4/g-VS/d, respectively), which led to an increased energy conversion efficiency from 48.05% to 66.21% through the co-production of hydrogen with methane.

Recent advancement on biological technologies and strategies for resource recovery from swine wastewater

Swine wastewater is categorized as one of the agricultural wastewater with high contents of organics and nutrients including nitrogen and phosphorus, which may lead to eutrophication in the environment. Insufficient technologies to remove those nutrients could lead to environmental problems after discharge. Several physical and chemical methods have been applied to treat the swine wastewater, but biological treatments are considered as the promising methods due to the cost effectiveness and performance efficiency along with the production of valuable products and bioenergies. This review summarizes the characteristics of swine wastewaters in the beginning, and briefly describes the current issues on the treatments of swine wastewaters. Several biological techniques, such as anaerobic digestion, A/O process, microbial fuel cells, and microalgae cultivations, and their future aspects will be addressed. Finally, the potentials to reutilize biomass produced during the treatment processes are also presented under the consideration of circular economy.

Microbes as vital additives for solid waste composting

Composting is a natural process that stems through microbial succession, marking the degradation and stabilization of organic matter present in waste. The use of microbial additives during composting is considered highly efficient, likely to enhance the production of different enzymes resulting in better rate of waste degradation. In lesser developed countries, composting has emerged as a vital technology to recycle the biodegradable waste while generating a useful product. Depending on the composition of the waste material, it can either directly undergo composting or homogenized prior to secondary waste treatment methods such as landfilling. However, a relatively expensive downstream handling all along is a main hurdle towards economics of the process. Although basic methodology and recent approaches are known in crucial aspects of the process through various reviews, exploring the behavior of effective microbial additives will be resourceful. In this review, to fill in the gap, studies related to microbial composting of municipal solid and food waste were acknowledged. Here in, factors that could slow down the composting process and affect the compost quality were addressed. Lastly, the review pictured a positive simulation and stated how excellent results, can be achieved by microbial additives during composting.

Surfactant assisted disperser pretreatment on the liquefaction of Ulva reticulata and evaluation of biodegradability for energy efficient biofuel production through nonlinear regression modelling

The present study aimed to increase the disintegration potential of marine macroalgae, (Ulva reticulata) through chemo mechanical pretreatment (CMP) in an energy efficient manner. By combining surfactant with disperser, the specific energy input was considerably reduced from 437.1 kJ/kg TS to 264.9 kJ/kg TS to achieve 10.7% liquefaction. A disperser rpm (10,000), pretreatment time (30 min) and tween 80 dosage (21.6 mg/L) were considered as an optimum for effective liquefaction of algal biomass. CMP was designated as an appropriate pretreatment resulting in a higher soluble organic release 1250 mg/L, respectively. Anaerobic fermentation results revealed that the volatile fatty acid (VFA) concentration was doubled (782 mg/L) in CMP when compared to mechanical pretreatment (MP) (345 mg/L). CMP pretreated algal biomass was considered as the suitable for biohydrogen production with highest H₂ yield of about 63 mL H₂/g COD than (MP) (45 mL H₂/g COD) and control (10 mL H₂/g COD).

Remediation of Petroleum-Contaminated Soil and Simultaneous Recovery of Oil by Fast Pyrolysis

Petroleum-contaminated soil (PCS) caused by the accidental release of crude oil into the environment, which occurs frequently during oil exploitation worldwide, needs efficient and cost-effective remediation. In this study, a fast pyrolysis technology was implemented to remediate the PCS and concurrently recover the oil. The remediation effect related to pyrolytic parameters, the recovery rate of oil and its possible formation pathway, and the physicochemical properties of the remediated PCS and its suitability for planting were systematically investigated. The results show that 50.9% carbon was recovered in oil, whose quality even exceeds that of crude oil. Both extractable total petroleum hydrocarbon (TPH) and water-soluble organic matter (SOM) in PCS were completely removed at 500 °C within 30 min. The remaining carbon in remediated PCS was determined to be in a stable and innocuous state, which has no adverse effect on wheat growth. On the basis of the systematically characterizations of initial PCS and pyrolytic products, a possible thermochemical mechanism was proposed which involves evaporation, cracking and polymerization. In addition, the energy consumption analysis and remediation effect of various PCSs indicate that fast pyrolysis is a viable and cost-effective method for PCS remediation.

Recent developments in synthetic biology and metabolic engineering in microalgae towards biofuel production

In the wake of the uprising global energy crisis, microalgae have emerged as an alternate feedstock for biofuel production. In addition, microalgae bear immense potential as bio-cell factories in terms of producing key chemicals, recombinant proteins, enzymes, lipid, hydrogen and alcohol. Abstraction of such high-value products (algal biorefinery approach) facilitates to make microalgae-based renewable energy an economically viable option. Synthetic biology is an emerging field that harmoniously blends science and engineering to help design and construct novel biological systems, with an aim to achieve rationally formulated objectives. However, resources and tools used for such nuclear manipulation, construction of synthetic gene network and genome-scale reconstruction of microalgae are limited. Herein, we present recent developments in the upcoming field of microalgae employed as a model system for synthetic biology applications and highlight the importance of genome-scale reconstruction models and kinetic models, to maximize the metabolic output by understanding the intricacies of algal growth. This review also examines the role played by microalgae as biorefineries, microalgal culture conditions and various operating parameters that need to be optimized to yield biofuel that can be economically competitive with fossil fuels.

Energy-efficient methane production from macroalgal biomass through chemo disperser liquefaction

In this study, an effort has been made to reduce the energy cost of liquefaction by coupling a mechanical disperser with a chemical (sodium tripolyphosphate). In terms of the cost and specific energy demand of liquefaction, the algal biomass disintegrated at 12,000rpm for 30min, and an STPP dosage of about 0.04g/gCOD was chosen as an optimal parameter. Chemo disperser liquefaction (CDL) was found to be energetically and economically sustainable in terms of liquefaction, methane production, and net profit (15%, 0.14gCOD/gCOD, and 4 USD/Ton of algal biomass) and preferable to disperser liquefaction (DL) (10%, 0.11 gCOD/gCOD, and -475 USD/Ton of algal biomass).