Addition of fish pond sediment and rock phosphate enhances the composting of green waste

Composite additives regulate physicochemical and microbiological properties in green waste composting: A comparative study of single-period and multi-period addition modes

Composting additives can significantly enhance green waste (GW) composting. However, their effectiveness is limited due to the short action duration of a single-period addition. Therefore, this study proposes that multi-period additive modes to prolong the action duration, expedite lignocellulose degradation, reduce composting time, and enhance product quality. This study conducted six treatments (T1-T6), introducing a compound additive (BLP) during the mesophilic (MP) and cooling periods (CP). Each treatment consistently maintained 25% total BLP addition of GW dry weight, with variations only in the BLP distribution in different periods. The composition of BLP consists of Wbiochar: Wlactic acid: Wpond sediment in a ratio of 10:1:40. Specifically, T1 added 25% BLP in CP, T2 added 5% in MP and 20% in CP, T3 added 10% in MP and 15% in CP, T4 added 15% in MP and 10% in CP, T5 added 20% in MP and 5% in CP, and T6 added 25% in MP. In this study, composting temperature, pH value, electrical conductivity, total porosity, the contents of lignin, cellulose, hemicellulose, and nutrient, scanning electron microscopy images, germination index, and the successions of different bacteria and fungi at the phylum and genus levels were detailed. Results showed T4 achieved two thermophilic periods and matured in just 25 days. T4 enhanced lignocellulose degradation rates (lignin: 16-53%, cellulose: 14-23%, hemicellulose: 9-48%) and improved nutrient content. The above results, combined with correlation analysis and structural equation model, indicated that T4 may promote the development of dominant bacteria (Proteobacteria, Firmicutes, Actinobacteria, Bacteroidetes) by regulating compost physicochemical properties and facilitate the growth of dominant fungi (Ascomycota and Basidiomycota) by modulating nutrient supply capacity. This ultimately leads to a microbial community structure more conducive to lignocellulose degradation and nutrient preservation. In summary, this study reveals the comprehensive effects of single-period and multi-period addition methods on GW composting, providing a valuable basis for optimizing the use of additives and enhancing the efficiency and quality of GW composting.

Effect of initial moisture content, resulting from different ratios of vegetable waste to maize straw, on compost was mediated by composting temperatures and microbial communities at low temperatures

Owing to the huge amounts and perishable character of vegetable wastes, composting is one of the best options for recycling vegetable wastes post-harvest. The initial moisture content (MC) is critical for optimizing composting process, but the effect of high MC in undehydrated vegetable wastes on composting was rarely reported. For this, the plant-scale windrows were prepared by mixing cauliflower waste and maize straw at different ratios to control initial MC of 70 % (T1-70) and 80 % (T2-80), respectively, and composted in winter. As composting progressed, substantial organic matter degradation, progressive humification, decreases in electrical conductivity and increases of pH and germination index (GI) were observed in both treatments. Nonetheless, T1-70 accelerated heating rate early during composting, prolonged high temperature period (>50 °C) by 30 d, thus increased the harmless level of composting, and significantly improved the humification of end-products compared to T2-80. Results also revealed that T1-70 activated more indigenous microbes and enhanced microbial interactions early during composting, with the fungi enriched in T1-70 playing an important role in accelerating the composting process. Remarkably, the difference in composting temperatures, humification degree, and microbial communities between the two treatments was most significant during the maturation phase. In this phase, MWH_CFBk5, Planktosalinus, Pseudopedobacter, and Luteimonas enriched in T1-70 were positively correlated with humification indices. It is suggested that the effect of initial MC, resulting from different ratios of vegetable waste to maize straw, on their composting was mediated by the composting temperature and microbial communities at low temperatures.

Ca(H2PO4)2 and MgSO4 activated nitrogen-related bacteria and genes in thermophilic stage of compost

This study was conducted to investigate the effects of Ca(H2PO4)2 and MgSO4 on the bacterial community and nitrogen metabolism genes in the aerobic composting of pig manure. The experimental treatments were set up as control (C), 1% Ca(H2PO4)2 + 2% MgSO4 (CaPM1), and 1.5% Ca(H2PO4)2 + 3% MgSO4 (CaPM2), which were used at the end of composting for potting trials. The results showed that Ca(H2PO4)2 and MgSO4 played an excellent role in retaining nitrogen and increasing the alkali-hydrolyzed nitrogen (AN), available phosphorus (AP), and available potassium (AK) contents of the composts. Adding Ca(H2PO4)2 and MgSO4 changed the microbial community structure of the compost. The microorganisms associated with nitrogen retention were activated. The complexity of the microbial network was enhanced. Genetic prediction analysis showed that the addition of Ca(H2PO4)2 and MgSO4 reduced the accumulation of nitroso-nitrogen and the process of denitrification. At the same time, despite the reduction of genes related to nitrogen fixation, the conversion of ammonia to nitrogenous organic compounds was promoted and the stability of nitrogen was increased. Mantel test analysis showed that Ca(H2PO4)2 and MgSO4 can affect nitrogen transformation-related bacteria and thus indirectly affect nitrogen metabolism genes by influencing the temperature, pH, and organic matter (OM) of the compost and also directly affected nitrogen metabolism genes through PO43- and Mg2+. The pot experiment showed that composting with 1.5% Ca(H2PO4)2 + 3% MgSO4 produced the compost product that improved the growth yield and nutrient content of cilantro and increased the fertility of the soil. In conclusion, Ca(H2PO4)2 and MgSO4 reduces the loss of nitrogen from compost, activates nitrogen-related bacteria and genes in the thermophilic phase of composting, and improves the fertilizer efficiency of compost products. KEY POINTS: • Ca(H2PO4)2 and MgSO4 reduced the nitrogen loss and improved the compost effect • Activated nitrogen-related bacteria and altered nitrogen metabolism genes • Improved the yield and quality of cilantro and fertility of soil.

Ore improver additions alter livestock manure compost ecosystem C:N:P stoichiometry

Deciphering the pivotal components of nutrient metabolism in compost is of paramount importance. To this end, ecoenzymatic stoichiometry, enzyme vector modeling, and statistical analysis were employed to explore the impact of exogenous ore improver on nutrient changes throughout the livestock composting process. The total phosphorus increased from 12.86 to 18.72 g kg-1, accompanied by a marked neutralized pH with ore improver, resulting in the Carbon-, nitrogen-, and phosphorus-related enzyme activities decreases. However, the potential C:P and N:P acquisition activities represented by ln(βG + CB): ln(ALP) and ln(NAG): ln(ALP), were increased with ore improver addition. Based on the ecoenzymatic stoiometry theory, these changes reflect a decreasing trend in the relative P/N limitation, with pH and total phosphorus as the decisive factors. Our study showed that the practical employment of eco stoichiometry could benefit the manure composting process. Moreover, we should also consider the ecological effects from pH for the waste material utilization in sustainable agriculture.

Microbial intervention improves pollutant removal and semi-liquid organo-mineral fertilizer production from olive mill wastewater sludge and rock phosphate

Olive mill wastewater sludge (OMWS) represents a residual pollutant generated by the olive oil industry, often stored in exposed evaporation ponds, leading to contamination of nearby land and water resources. Despite its promising composition, the valorization of OMWS remains underexplored compared to olive mill wastewater (OMW). This study aims to identify potent native microbial species within OMWS suitable for bioremediation and its transformation into a high-value organic fertilizer. The microbial screening, based on assessing OMWS tolerance and phosphate solubilization properties in vitro, followed by a singular inoculation using a mixture of OMWS and rock phosphate (RP). Identification of FUN 06 (Galactomyces Geotrichum), a fungal species, employed as an inoculant in the treatment of sterile OMWS supplemented with RP. Results demonstrate that fungal inoculation notably diminished OMWS phytotoxicity while enhancing its physicochemical parameters, nutrient concentrations, and removal of toxic organic compounds by up to 90% compared to the control, and enhances plant growth, offering a sustainable approach to tackle environmental concerns. Additionally, metataxonomic analysis unveiled FUN 06's propensity to enhance the presence of microbial species engaged in pollutant degradation. However, higher RP dosage (10%) appeared to adversely affect bioprocess efficiency, suggesting a potential dose-related effect. Overall, FUN 06, isolated from OMWS evaporation ponds, shows promise for effective bioremediation and sustainable reuse. In fact, our results indicate that targeted microbial inoculation stands as an effective strategy for mitigating pollutants in OMWS, facilitating its conversion into a nutrient-rich organo-mineral fertilizer suitable for direct use, promoting its beneficial reuse in agriculture, thereby presenting a promising avenue for olive oil waste management.

Recent Trends and Advances in Additive-Mediated Composting Technology for Agricultural Waste Resources: A Comprehensive Review

Agriculture waste has increased annually due to the global food demand and intensive animal production. Preventing environmental degradation requires fast and effective agricultural waste treatment. Aerobic digestion or composting uses agricultural wastes to create a stabilized and sterilized organic fertilizer and reduces chemical fertilizer input. Indeed, conventional composting technology requires a large surface area, a long fermentation period, significant malodorous emissions, inferior product quality, and little demand for poor end results. Conventional composting loses a lot of organic nitrogen and carbon. Thus, this comprehensive research examined sustainable and adaptable methods for improving agricultural waste composting efficiency. This review summarizes composting processes and examines how compost additives affect organic solid waste composting and product quality. Our findings indicate that additives have an impact on the composting process by influencing variables including temperature, pH, and moisture. Compost additive amendment could dramatically reduce gas emissions and mineral ion mobility. Composting additives can (1) improve the physicochemical composition of the compost mixture, (2) accelerate organic material disintegration and increase microbial activity, (3) reduce greenhouse gas (GHG) and ammonia (NH3) emissions to reduce nitrogen (N) losses, and (4) retain compost nutrients to increase soil nutrient content, maturity, and phytotoxicity. This essay concluded with a brief summary of compost maturity, which is essential before using it as an organic fertilizer. This work will add to agricultural waste composting technology literature. To increase the sustainability of agricultural waste resource utilization, composting strategies must be locally optimized and involve the created amendments in a circular economy.

Pilot-scale study of innovative mechanically-enhanced dynamic composting for treating kitchen waste

This study introduced a novel mechanically-enhanced dynamic composting (MEDC) method for treating kitchen waste (KW) through partial-mixing and stratified fermentation. A pilot test varied aeration frequencies (AF) to refine control parameters and explore the maturation mechanism. Results showed that a moderate AF (10 min/4 h) achieved optimal efficiency, with a compost germination index of 123 % within 15 d. Moderate AF enhanced the growth of Corynebacterium_1 (25.4 %) and Saccharomonospora (10.5 %) during the low-temperature stage and Bacillus growth (91.3 %) during the maturation stage. Moreover, it enhanced microbial interactions (with an average degree of 19.9) and promoted substrate degradation and transformation, expediting heating and maturation. Multivariate dimensionality reduction analysis showed the MEDC accomplished rapid composting through stratified composting, dividing the reactor into distinct functional zones: feeding, low-temperature, high-temperature, and maturation. This enabled efficient microorganism enrichment and material degradation, expediting KW decomposition and maturation. This study offers a promising alternative for accelerated KW composting.

A review of the definition, influencing factors, and mechanisms of rapid composting of organic waste

Composting is a traditional method of treating organic waste. A growing number of studies have been focusing on accelerating the process to achieve "rapid composting." However, the specific definition and influencing factors of rapid composting remain unclear. Therefore, we aimed to gather more insight into the features of rapid composting by reviewing the literature concerning organic waste composting published in the Web of Science database in the past 5 years. We selected 1615 sample studies with "composting" as the subject word and analyzed the effective composting time stated in each study. We defined rapid composting within 15 days using the median test and quartile method. Based on this definition, we summarized the influencing factors of "rapid composting," namely materials, reactors, temperature, and microorganisms. Finally, we summarized two mechanisms related to humus formation during organic waste rapid composting: high temperature-promoting maturation and microbial driving mechanisms. This literature review compiled useful references to help promote the development of rapid composting technology and related equipment.

Stability of aerobic granular sludge for simultaneous nitrogen and Pb(II) removal from inorganic wastewater

ABSTRACTIn this paper, we proposed a strategy for the establishment of an aerobic granular sludge (AGS) system for simultaneous nitrogen and Pb(II) removal from inorganic wastewater. AGS was stored in lead nitrate solution to select functional bacteria resistant to lead poison, and then an AGS system for ammonia nitrogen (180-270 mg/L) and Pb(II) (15-30 mg/L) removal was established based on carbon dosing and a two-stage oxic/anoxic operational mode. After storage for 40 days, the stability of AGS decreased because specific oxygen uptake rate, nitrification rate and abundance of Nitrosomonas decreased to different degrees compared with those before storage. During the first 70 days of the recovery process, AGS in R1 (the blank reactor) and R2 (the control reactor) both experienced a first breakage and then regranulation process. The main properties of AGS in reactors R1 and R2 tended to be stable after days 106 and 117, respectively, but the structure of steady-state AGS in R2 was more compact. The total inorganic nitrogen (TIN) in effluent from R1 and R2 basically remained below 25 mg/L after days 98 and 90, respectively. The Pb(II) concentration in effluent from R2 was always below 0.3 mg/L. On day 140, the relative abundance of Nitrosomonas in R2 (6.17%) was significantly lower than that in R1 (12.15%), whereas the relative abundance of denitrifying bacteria was significantly higher than that in R1 (62.44% and 46.79%). The system removed 1 kg of influent TIN only consuming approximately 1.85 kg of carbon source, demonstrating clear advantages in energy savings.

Investigating the role of bulking agents in compost maturity

Kitchen waste is increasing globally, similarly in Pakistan bulk of municipal solid waste comprises of kitchen waste specifically, tea waste. Composting of kitchen waste is one of the promising ways to convert waste into useful product, resulting into zero waste. This study is aimed to convert waste (kitchen waste) in to a resource (compost) using bulking agents (tea waste and biochar) for reducing maturity time. Secondly, compost application on Solanum lycopersicum (tomato) was also tested. Four compost treatments were designed under aerobic composting conditions for 30 days. Tea waste and biochar have accelerated the maturity rate and produced a nutrient rich compost. Final compost had Electrical Conductivity of 2mS/cm, Carbon Nitrogen ration of 15, 54% of organic matter, 15% of moisture content, 48% of cellulose content, and 28% of Lignin content. With the use of Co-compost the Solanum lycopersicum showed 133% germination index, 100% germination, 235% Munoo-Liisa Vitality Index and 1238% seed vigor index. Co-compost also improved the soil total nitrogen by 1.4%, total phosphorous by 2%, total potassium by 2.1% and bulk density by 2.6 gcm-3. This study successfully used tea waste and biochar as bulking agents to reduce maturation time to 30 days. Tea waste and biochar enhanced the organic matter degradation, lignocellulose degradation, water holding capacity, porosity, seed's vigor, germination index. This research can be helpful in developing home composting and home gardening to combat solid waste management and food security issue in developing countries.

Industrial-scale composting of swine manure with a novel additive-yellow phosphorus slag: Variation in maturity indicators, compost quality and phosphorus speciation

Composting experiment of swine manure, adding with yellow phosphorus slag(YPS) at 5% (w/w), was conducted in an industrial-scale reactor covered with semi-permeable membrane. During 27 days of composting, the changes in temperature, compost quality and phosphorus(P) speciation of products were monitored. Results indicated that the temperature of compost pile was sharply increased on day 2, and the thermophilic period lasted for 15 days. The dynamics in germination index(GI), pH, nutrient contents, etc. of products were in line with conventional composting process. For P distribution, the contents of total-P and citric acid extracted-P(CAP) of products were increased during composting, while that of Olsen-P was decreased. HCl extracted inorganic P(HCl-Pi), a slowly release fraction of P, was dominated in the product, which showed an increasing trend during the composting. These results suggest that the industrial-scale composting with novel YPS additive can be accomplished, and its product contains abundant slowly released P.

Co-composting of cattle manure and wheat straw covered with a semipermeable membrane: organic matter humification and bacterial community succession

Semipermeable membrane-covered composting is one of the most commonly used composting technologies in northeast China, but its humification process is not yet well understood. This study employed a semipermeable membrane-covered composting system to detect the organic matter humification and bacterial community evolution patterns over the course of agricultural waste composting. Variations in physicochemical properties, humus composition, and bacterial communities were studied. The results suggested that membrane covering improved humic acid (HA) content and degree of polymerization (DP) by 9.28% and 21.57%, respectively. Bacterial analysis indicated that membrane covering reduced bacterial richness and increased bacterial diversity. Membrane covering mainly affected the bacterial community structure during thermophilic period of composting. RDA analysis revealed that membrane covering may affect the bacterial community by altering the physicochemical properties such as moisture content. Correlation analysis showed that membrane covering activated the dominant genera Saccharomonospora and Planktosalinus to participate in the formation of HS and HA in composting, thus promoting HS formation and its structural complexity. Membrane covering significantly reduced microbial metabolism during the cooling phase of composting.

Improving the humification by additives during composting: A review

Humic substances (HSs) are key indicators of compost maturity and are important for the composting process. The application of additives is generally considered to be an efficient and easy-to-master strategy to promote the humification of composting and quickly caught the interest of researchers. This review summarizes the recent literature on humification promotion by additives in the composting process. Firstly, the organic, inorganic, biological, and compound additives are introduced emphatically, and the effects and mechanisms of various additives on composting humification are systematically discussed. Inorganic, organic, biological, and compound additives can promote 5.58-82.19%, 30.61-50.92%, 2.3-40%, and 28.09-104.51% of humification during composting, respectively. Subsequently, the advantages and disadvantages of various additives in promoting composting humification are discussed and indicated that compound additives are the most promising method in promoting composting humification. Finally, future research on humification promotion is also proposed such as long-term stability, environmental impact, and economic feasibility of additive in the large-scale application of composting. It is aiming to provide a reference for future research and the application of additives in composting.

The effect of biochar prepared at different pyrolysis temperatures on microbially driven conversion and retention of nitrogen during composting

Aerobic composting is one of the most economical ways to produce organic fertilizer from agricultural wastes. In this research, we independently developed a simple composting simulation reactor. The effects of biochar pyrolysised at different pyrolysis temperatures (B1-450 °C; B2-550 °C; and B3-650 °C) on nitrogen conversion (Total nitrogen (TN), ammonium nitrogen (NH₄ ⁺-N), nitrate nitrogen (NO₃ ^--N), cumulative amount of ammonia (CEA) and nitrous oxide (CEN) emission, nitrogen loss rate (NLR), etc.) and functional microbial community (cbbL, cbbM and nifH) structure in the composting system were studied. Results showed that the addition of biochar significantly improved the efficiency of composting, increased the NO₃ ^--N concentration and reduced the NLR (%) in the composting system (B3 (31.4 ± 2.73)<B2=B1 (41.7 ± 3.29)<B0 (54.5 ± 3.34), p ≤ 0.05), while the loss rate of nitrogen positively correlated with compost pH. Denitrifying bacterial genera such as Pseudomonas, Alcaligenes, Paracoccus, Bacillus, Citrobacter, Mesorhizobium, Thiobacillus and Rhodococcus in this study was an important reason for nitrogen loss during composting, and the abundance of autotrophic microorganisms (such as Sulfuritalea, Hydrogenophaga, Thiobacillus, Thiomonas and Candidatus_Thioglobus) in treatments with biochar (B1, B2 and B3) were higher than that in B0. Besides, the community structure in the treatments B2 and B3 was similar at the end of composting and clearly distinguished from that in B1. Moreover, the five functions predicted by OTUs in this study with the highest proportions were chemoheterotrophy, nitrate reduction, fermentation, aerobic chemoheterotrophy and nitrogen respiration. The study provided a theoretical basis for the application of biochar to improve the compost-related processes.

Incorporation of Substrates and Inoculums as Operational Strategies to Promote Lignocellulose Degradation in Composting of Green Waste—A Pilot-Scale Study

Composting is a sustainable alternative for green waste (GW) valorization contributing to the circular bioeconomy. However, the processing time must be reduced and the end-product quality must be improved. This study determined the effect of the incorporation of processed food waste (PFW), unprocessed food (UPFW), sawdust (SW), phosphate rock (PR) and a specific bacterial inoculum on GW-composting process parameters and product quality. Three treatments were evaluated in 120 kg piles: (i) TA: (GW + UPFW + PFW + inoculum), (ii) TB (GW + UPFW + PFW), and (iii) TC (GW). An inoculum of Bacillus sp. and Paenibacillus sp. was incorporated in the cooling phase for TA. On the other hand, the effect of the inoculum at the laboratory scale (20 kg reactors) was compared with that found at the pilot scale (120 kg piles). The incorporation of FW, SW, PR and the inoculum increased the amount of lignocellulose biodegradation (TA: 29.1%; TB: 22.7%; TC: 18.2%), which allowed for a reduction of up to 14 days of processing time. The product obtained for TA had a similar quality to the other two treatments, although a lower phytotoxicity was determined according to the germination index (TA: 95%; TB: 85%; and TC: 83%). The final product of TA showed the best agricultural characteristics with pH 8.3, TOC of 24.8%, TN of 1.32%, and GI of 98.8%. Finally, the scaling effect with the bacterial inoculum was shown to affect parameters such as the TOC, TN, GI, and, to a lesser extent, temperature and pH. The results obtained in this paper highlight the importance of optimizing the composting of GW, specifically with the use of co-substrates and specific inocula, which can be of interest for composting materials with a high content of lignocellulose such as GW.

Combined addition of biochar, lactic acid, and pond sediment improves green waste composting

Composting, as an eco-friendly method to recycle green waste (GW), converts the GW into humus-like compounds. However, conventional GW composting is inefficient and generates poor-quality compost. The objective of this research was to investigate the effects of the combined additions of biochar (BC; 0, 5, and 10 %), lactic acid (LA; 0, 0.5, and 1.0 %), and pond sediment (PS; 0, 20, and 30 %) on GW composting. A treatment without additives served as the control (treatment T1). The results showed that treatment R1 (with 5 % BC, 0.5 % LA, and 20 % PS) was better than the treatments with two additives or no additive and required only 32 days to generate a stable and mature product. Compared with T1, R1 improved water-holding capacity, electrical conductivity, available phosphorus, available potassium, nitrate nitrogen, OM decomposition, and germination index by 51 %, 48 %, 170 %, 93 %, 119 %, 157 %, and 119 %, respectively. R1 also increased the activities of cellulase, lignin peroxidase, and laccase. The results showed that the combined addition of BC, LA, and PS increased the gas exchange, water retention, and the microbial secretion of enzymes, thus accelerating the decomposition of GW. This study demonstrated the effects of BC, LA, and PS addition on GW composting and final compost properties, and analyzed the reasons of the effects. The study therefore increases the understanding of the sustainable disposal of an important solid waste.

Optimization of lignocellulolytic bacterial inoculum and substrate mix for lignocellulose degradation and product quality on co-composting of green waste with food waste

The present study evaluates the effect of the mixing ratio of substrates and inoculation with lignocellulolytic bacteria on green waste (GW) and food waste (FW) co-composting. A Box-Behnken design was used to simultaneously optimize the lignocellulose degradation (%LD) and end-product quality. The best operational conditions were 4.85*10⁵ CFU g^-1 of Bacillus sp. F3X3 and 1.44*10⁶ CFU g^-1 of Paenibacillus sp. F1A5 with a substrate mixture containing 50% GW, 32.5% unprocessed FW, 2.5% processed FW, 13% sawdust, and 2% phosphate rock; with a C/N ratio of 27. Under these conditions, the %LD was 33% and the end-product has pH 8.3, TOC 22,4%, TN 1,7%, and a germination index of 103%. Therefore, the product complies with quality standards for organic fertilizers. The results of this study allow the identification of appropriate strategies to optimize GW composting, increasing the degradation of lignocellulose and improving the end-product quality.

Effect of biochar on transformation of dissolved organic matter and DTPA-extractable Cu and Cd during sediment composting

This study investigated the influence of biochar on temperature, pH, organic matter (OM), seed germination index (GI), the fluorescent components of dissolved organic matter (DOM), and bioavailability of DTPA-extractable Cu and Cd during composting and analyzed the relation between DTPA-extractable metals with pH, OM, and the fluorescent components of DOM. Results showed that the addition of biochar shortened the thermophilic phase, reduced the pH at maturation period, accelerated the decomposition of OM, and raised GI. Besides, it promoted the formation of components with benzene ring in FA and HyI and the degradation of protein-like organic-matters in FA and HA, which was mainly related with the decrease of DTPA-extractable Cd and the increase of DTPA-extractable Cu. After composting, DTPA-extractable Cd in pile A and pile B were decreased by 37.15% and 27.54%, respectively, while the bioavailability of Cu in pile A and pile B was increased by 65.71% and 68.70%, respectively. All these findings demonstrate positive and negative impact produced by biochar into various heavy metals and the necessary of optimization measures with biochar in sediment composting.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Phosphorus excess changes rock phosphate solubilization level and bacterial community mediating phosphorus fractions mobilization during composting

This study investigated the changes of phosphorus (P) fractions, bacterial community and their response to available P or carbon (C):P during composting with different rock phosphate (RP) addition levels. Results showed that adding RP at 10% or 15% promoted the rise of temperature, maturity and Olsen P accumulation in composting, which had a higher amount of RP solubilization than other groups. Available P changed bacterial composition and decreased diversity in composts. RP solubilization efficiency was negatively correlated to C:P ratio and the highest (22.7%) when 10% RP was added, in which bacterial community changed from "function redundancy" to "intensive P-solubilization". Low C:P ratio (〈300) increased the RP solubilization ratio especially within 135-160. Therefore, this study proposed that adding P-rich substrates to decrease C:P ratio could regulate P-solubilizers' activity for increasing RP solubilization efficiency during composting.

Implementation of strategies to optimize the co-composting of green waste and food waste in developing countries. A case study: Colombia

Green waste (GW) management is a key issue due to its high production rate and its variety of physical properties and chemical composition. Composting is a promising alternative for GW treatment and valorization. However, the presence of recalcitrant components such as lignin and cellulose increase the processing time. Strategies such as addition of co-substrates and operative modifications have improved the processing time and compost quality. Therefore, in this study, three strategies have been implemented (i) addition of unprocessed food (UF) and processed foods (PF) as co-substrates for GW to improve the nutrients composition of the substrates at the beginning of the process, (ii) addition of phosphate rock (PR) to improve product quality, and (iii) the use of two-stage composting (TSC) to accelerate the degradation. For this purpose, three treatments with the same mixture (48% GW + 21% UF + 18% PF + 13% sawdust (SW)) were conducted: (i) TA (TSC + 15% PR), (ii) TB (traditional composting +15% PR), and (iii) TC (traditional composting). TSC did not show significant differences compared with TC regarding the process and compost quality, while the addition of PR increased the phosphorus content of the product. However, TC produced the compost with the highest quality according to the Colombian legislation for soil amendment.

A Conceptual Framework for Incorporation of Composting in Closed-Loop Urban Controlled Environment Agriculture

Controlled environment agriculture (CEA), specifically advanced greenhouses, plant factories, and vertical farms, has a significant role to play in the urban agri-food landscape through provision of fresh and nutritious food for urban populations. With the push towards improving sustainability of these systems, a circular or closed-loop approach for managing resources is desirable. These crop production systems generate biowaste in the form of crop and growing substrate residues, the disposal of which not only impacts the immediate environment, but also represents a loss of valuable resources. Closing the resource loop through composting of crop residues and urban biowaste is presented. Composting allows for the recovery of carbon dioxide and plant nutrients that can be reused as inputs for crop production, while also providing a mechanism for managing and valorizing biowastes. A conceptual framework for integrating carbon dioxide and nutrient recovery through composting in a CEA system is described along with potential environmental benefits over conventional inputs. Challenges involved in the recovery and reuse of each component, as well as possible solutions, are discussed. Supplementary technologies such as biofiltration, bioponics, ozonation, and electrochemical oxidation are presented as means to overcome some operational challenges. Gaps in research are identified and future research directions are proposed.

The influence of feedstocks and additives in 23 added-value composts as a growing media component on Pythium irregulare suppressivity

Alternative materials with added-value functions, such as phytopathogen suppression and biostimulant and/or biofertilising activity, have been proposed as peat substitutes in growing media. The aim of this work was to evaluate the effect of 23 agro-industrial composts as components of growing media for baby-leaf lettuce transplant production and their activity against the plant pathogen Pythium irregulare. The composts were produced by mixing different starting feedstocks-tomato waste, leek waste, olive mill cake and vineyard pruning waste-with different additives (coffee, thyme, lavender and rockrose waste), which were incorporated at the beginning of the maturation phase. The results obtained indicated that the composts were mature enough to be used as growing media. The fresh weight of the lettuce plants grown with the different composts was significantly higher than in plants obtained with peat. Composts with the coffee additive produced higher lettuce fresh weight, while those with thyme yielded a lower fresh weight. Moreover, composts as components of growing media showed significantly higher P. irregulare suppressiveness than peat. The composts with additives produced lower lettuce fresh weight than composts without additives, but showed higher suppressiveness. Composts with additives showed opposite results depending on whether they were exposed to pathogens or not. Composts with additives showed opposite results according to pathogen pressure or not. Out of all the composts studied, the compost with tomato waste and leek waste as the initial feedstock, and lavender as an additive, showed the highest suppressive capacity. After lettuce harvesting, the growing media with composts showed significantly lower concentrations of P. irregulare than peat. Principal Component Analysis (PCA) revealed that the growing media with compost can be grouped together according to the additive type.

Improvement of two-stage composting of green waste by addition of eggshell waste and rice husks

With the development of urban greening and increases in the human population, the production of green waste (GW) has been increasing in China. Although GW is biodegradable, its composting is difficult because of its low degradation rate. This study focuses on how addition of eggshell waste (ESW; at 0, 10, and 20%) and/or rice husks (RH; at 0, 15, and 25%) affects the two-stage composting of GW on the basis of temperature, bulk density, particle-size distribution, pH, nitrogen changes, carbon dioxide emission, organic matter degradation, humic substances, the activities of microorganisms and enzymes, and the phytotoxicity to germinating seeds. The combined addition of 10% ESW and 25% RH produced the highest quality compost in the shortest time. To produce a stable and mature product, two-stage composting of GW required 30 days without additives but only 20 days with the combined addition of 10% ESW and 25% RH.

Adding a recyclable amendment to facilitate sewage sludge biodrying and reduce costs

Finding an economical amendment, available in a steady supply, is needed to support the biodrying industrialization. This research developed a recyclable biodrying amendment (RBA) to condition the biodrying of sewage sludge. The pilot-scale treatment (T_R), which included the addition of equivalent weights of RBA and sawdust as amendments, resulted in a higher pile temperature and longer thermophilic phase compared to the control (T_C), which used only sawdust as an amendment. The final moisture content levels were below 50% with both T_R and T_C. The heat use efficiency for water evaporation was 72.2% and 73.0% in T_R and T_C, respectively. The activity of α-amylase and cellulose 1,4-β-cellobiosidase increased during the thermophilic phase, while the activity of endo-1,4-β-glucanase and endo-1,4-β-xylanase decreased during the thermophilic phase with both T_R and T_C. The fourier-transform infrared spectra indicated that adding the RBA resulted in good biodegradability of the lipids, proteins, and polysaccharides. The humic acid to fulvic acid ratio in T_R and T_C increased from 0.33 (T_R) and 0.35 (T_C) on day 0-0.46 (T_R) and 0.45 (T_C) on day 21, indicating the humification process. The RBA recovery rate was 95.6% and can be reused. These findings highlight that adding RBA showed satisfactory biodrying performance, reduced the amendment cost, and the biodrying product could be incinerated without energy deficit.

Food waste composting - Is it really so simple as stated in scientific literature? - A case study

Food waste has recently gained much worldwide interest due to its influence on the environment, economy and society. Gathering and recycling of food waste is the essential issue in the waste management and the interest in processing food waste arises mainly out of influence of the processes of food putrefaction on the environment. Composting of food waste encounters a number of technical challenges, arising weak physical structure of food waste with weak porosity, high content of water, low carbon-to-nitrogen relation and fast hydrolysis and accumulation of organic acids during composting. Therefore, the aim of this study was to investigate the challenges facing installations intended for food waste composting, with the purpose to their optimization with use of appropriate additives. Physico-chemical, biochemical characteristics and phytotoxicity of the produced compost has been measured. Two additives (20% biochar and 20% sawdust) were chosen from experimental variants I-XII containing different additives (biochar, Devonian sand, sawdust) in diverse concentration. The use of selected additives seems to slightly increase potential of hydrogen value and carbon-to-nitrogen ratio, while decreasing electrical conductivity in comparison with control sample. The results obtained also show that the addition of biochar leads to an increase dehydrogenase, phosphatase and arylsulphatase activities and addition of sawdust has a positive effect on beta-D-glucosidase, protease, phosphatase and arylsulphatase activities. The phytotoxicity test shows that the compost made of food waste (control sample) and with addition of biochar is toxic to plants. By contrast, the addition of sawdust shows that the compost was not phytotoxic. In conclusion, the addition of additives does not provide unambiguous results in terms of the quality of the final product in all monitored parameters. Therefore, we can state that food waste was reduced and hygienized, and that the final product does not meet conditions for mature compost.

Thermotolerant and Thermophilic Mycobiota in Different Steps of Compost Maturation

Composting is a complex process in which various micro-organisms, mainly fungi and bacteria, are involved. The process depends on a large number of factors (biological, chemical, and physical) among which microbial populations play a fundamental role. The high temperatures that occur during the composting process indicate the presence of thermotolerant and thermophilic micro-organisms that are key for the optimization of the process. However, the same micro-organisms can be harmful (allergenic, pathogenic) for workers that handle large quantities of material in the plant, and for end users, for example, in the indoor environment (e.g., pots in houses and offices). Accurate knowledge of thermotolerant and thermophilic organisms present during the composting stages is required to find key organisms to improve the process and estimate potential health risks. The objective of the present work was to study thermotolerant and thermophilic mycobiota at different time points of compost maturation. Fungi were isolated at four temperatures (25, 37, 45, and 50 °C) from compost samples collected at five different steps during a 21-day compost-maturation period in an active composting plant in Liguria (northwestern Italy). The samples were subsequently plated on three different media. Our results showed a high presence of fungi with an order of magnitude ranging from 1 × 10⁴ to 3 × 10⁵ colony-forming units (CFU) g⁻¹. The isolated strains, identified by means of specific molecular tools (ITS, beta-tubulin, calmodulin, elongation factor 1-alpha, and LSU sequencing), belonged to 45 different species. Several thermophilic species belonging to genera Thermoascus and Thermomyces were detected, which could be key during composting. Moreover, the presence of several potentially harmful fungal species, such as Aspergillus fumigatus, A. terreus, and Scedosporium apiospermum, were found during the whole process, including the final product. Results highlighted the importance of surveying the mycobiota involved in the composting process in order to: (i) find solutions to improve efficiency and (ii) reduce health risks.

Passivation of lead and cadmium and increase of the nutrient content during sewage sludge composting by phosphate amendments

As an efficient and cost-effective biological treatment method for sewage sludge, composting has been widely used worldwide. To passivate heavy metals and enhance the nutrient content in compost, in the present study, phosphate rock, calcium magnesium phosphate, and monopotassium phosphate were added to the composting substrate. According to the Community Bureau of Reference sequential extraction procedure, phosphate rock and monopotassium phosphate amendments exhibit a good passivation effect on Cd and Pb. The X-ray diffraction patterns proved the formation of Pb₃(PO₄)₂ and Cd₅(PO₄)₂SiO₄ crystals, and X-ray absorption near-edge structure spectroscopy illustrated the change in P speciation after phosphate amendment. Furthermore, phosphate amendment increased the contents of total P and available P, and it reduced the loss of N during sewage sludge composting. The germination index showed that the target phosphate amendments in sewage sludge compost had no negative effects on seed germination, and this method has great potential to be used as a soil amendment.

Effect of bean dregs amendment on the organic matter degradation, humification, maturity and stability of pig manure composting

The purpose of this study was to effectively dispose of bean dregs (BD) using composting technology, which could provide a theoretical basis for the disposal of BD. Therefore, the influence of different quantities of bean dregs (BD) (0%, 5%, 10% and 15%, w/w with a dry base of pig manure (PM)) on the decomposition and humification of organic matter during PM-composting was investigated, and a 0% BD amendment was used as the control (CK). Wheat straw was used as a bulking agent. Compared to the CK, the BD amendment promoted the degradation of organic matter. The degree of organic matter degradation increased by 16.46-25.04% upon BD amendment. Furthermore, the BD amendment improved humification and increased indices of the humification ratio (HR), percentage of humic acids (PHA), degree of polymerization (DP) and the humification index (HI). Furthermore, Fourier transform infrared (FTIR) spectroscopy indicated that the aromatic structure was enhanced with the BD amendment, and excitation-emission matrix (EEM) fluorescence spectra showed increased humic-like substance production. Additionally, the dissolved organic carbon (DOC), germination index (GI), electrical conductivity (Ec) and carbon/nitrogen (C/N) influenced the maturity and stability of composting. Comparatively, a 10% BD addition showed the optimal performance among all PM-composting treatments.

Preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH2PO4 and FeSO4

Composting is an effective method for treating sewage sludge. The aim of this work was to study preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH₂PO₄ and FeSO₄. The results show the loss rate of N decreased by 27.5% while that of S was increased by 32.1% compared with the control treatment during composting when KH₂PO₄ and FeSO₄ were added. X-ray absorption near-edge structure spectra show that S was converted to a highly oxidizable state during sewage sludge composting with added KH₂PO₄. The mobility factors of Cu, Zn, and Pb after composting were found to decrease by 13.6%, 21.6%, and 3.8%, respectively, compared with those before composting when KH₂PO₄ was added. Adding these two materials to Cu and Zn inhibits Zn₃(PO₄)₂(H₂O)₄ and Cu₅(PO₄)₂(OH)₄ from transforming into more mobile forms, while adding these materials to Pb promotes Pb₃(PO₄)₂ formation.

Humic substances developed during organic waste composting: Formation mechanisms, structural properties, and agronomic functions

Aerobic composting is a typical biochemical process of stabilization and harmlessness of organic wastes during which organic matter degrades, and then aggregates, to produce humic substances (HSs). HSs are a core product of-and a crucial indicator of-the maturation of compost that can be used in soil amendments. The formation of HSs is affected by the characteristics of the raw materials involved, the presence of compost additives, microbial activity, temperature, pH, the C/N ratio, moisture content, oxygen content and particle size, all of which can interact with each other. The formation of HSs is therefore complex. Moreover, it is difficult to identify definitive structures of humic acids (HAs) and fulvic acids (FAs), which are the two major components of HSs. However, HSs represent the same functional groups and structural arrangements, which helps to predict their structures. Functional groups represented by phenol and carboxylic acid groups of HAs and FAs can provide various agronomic functions, such as plant growth enhancement, water and nutrient retention, and disease suppression capacity. Overall, HSs can act as a soil amendment, fertilizer, and plant growth regulator. These functions of HSs enhance the reuse potential of organic waste compost products; however, this requires scientific control of various composting parameters and appropriate application of final products.

Comparison of chemical and microbiological changes during the aerobic composting and vermicomposting of green waste

This research was conducted to compare chemical and microbiological properties during aerobic composting (AC) and vermicomposting (VC) of green waste. Relative to AC, VC significantly decreased the pH and lignin and cellulose contents, and significantly increased the electrical conductivity and total N and available P contents. For AC, BIrii41_norank (order Myxococcales) was the major bacterial genus at 30 d and again became dominant genus from 90–150 d, with relative abundances of 2.88% and 4.77–5.19%, respectively; at 45 d and 60 d, the dominant bacterial genus was Nitrosomonadaceae_uncultured (order Nitrosomonadales) with relative abundances of 2.83–7.17%. For VC, the dominant bacterial genus was BIrii41_norank (except at 45 d), which accounted for 2.11–7.96% of the total reads. The dominant fungal class was Sordariomycetes in AC (relative abundances 39.2–80.6%) and VC (relative abundances 42.1–69.5%). The abundances of microbial taxa and therefore the bacterial and fungal community structures differed between VC and AC. The quality of the green waste compost product was higher with VC than with AC. These results will also help to achieve further composting technology breakthroughs in reducing the composting time and improving compost quality.

Influence of sugar beet pulp and paper waste as bulking agents on physical, chemical, and microbial properties during green waste composting

Composting is considered to be a natural, sustainable, and highly beneficial method for solid waste disposal. The objective of this study was to investigate the two-stage composting of green waste (GW) as affected by the addition of sugar beet pulp (SBP; at 0, 25, and 35%) and/or paper waste (PW; at 0, 5, and 10%) as bulking agents. The combination of SBP and PW greatly improved the composting conditions and the final compost quality in terms of composting temperature; pH; emissions of ammonia, nitrite nitrogen, and carbon dioxide; lignocellulose degradation; microbial abundance; enzyme activities; particle-size distribution; the ratio of water-soluble organic carbon to organic nitrogen; and phytotoxicity. The optimal two-stage composting process of GW and the highest quality compost product were obtained with the combination of 25% SBP and 10% PW. This optimal combination of bulking agents produced a mature and stable final compost product in only 20 days.

Effects of waste lime and Chinese medicinal herbal residue amendments on physical, chemical, and microbial properties during green waste composting

Traditional composting is time-consuming and often results in a low-quality product. The objective of this study was to determine the effects of waste lime (WL; at 0, 2.5, and 3.5%) and/or Chinese medicinal herbal residues (CMHRs; at 0, 10, and 20%) as amendments on the two-stage composting of green waste (GW). The combination of WL and CMHRs improved compost particle-size distribution and pH, decreased nitrogen loss, and increased cation exchange capacity (CEC), nutrient content, and microbial numbers. The combination of WL and CMHRs also accelerated organic matter humification and lignocellulose degradation and therefore increased the germination index of the final compost. Relative to the non-amended compost, the optimal amendment (2.5% WL and 20% CMHRs) increased the percentage of particles of ideal size from 23.8 to 66.9%, the pH from 6.69 to 7.17, the CEC from 52 to 169 cmol/kg, the humic acid to fulvic acid ratio from 1.32 to 2.49, the hemicellulose degradation rate from 42 to 87%, and the cellulose degradation rate from 20 to 61%. The treatment with addition of 2.5% WL and 20% CMHRs to GW required only 21 days to generate the highest quality compost product.

Effect of temperature on thermophilic composting of aquaculture sludge: NH3 recovery, nitrogen mass balance, and microbial community dynamics

Development of thermophilic composting for maximizing NH₃ gas recovery would enable the production of a nitrogen source which is free from pathogen/heavy metal, for the cultivation of high-value microalgae. The present study examined the effect of NH₃ recovery, nitrogen mass balance, and microbial community dynamics on thermophilic composting of shrimp aquaculture sludge. The emission of NH₃ gas at 60 and 70 °C was 14.7% and 15.6%, respectively, which was higher than that at 50 °C (9.0%). The nitrogen mass balance analysis revealed that higher temperatures enhanced the solubilization of non-dissolved nitrogen and liberation of NH₃ gas from the produced NH₄⁺-N. High-throughput microbial community analysis revealed the shift of the dominant bacterial group from Bacillus to Geobacillus with the rise of composting temperature. In conclusion, thermophilic composting of shrimp aquaculture sludge at 60-70 °C was the most favorable condition for enhancing NH₃ gas recovery.

A systematic review on the composting of green waste: Feedstock quality and optimization strategies

Green waste (GW) is an important fraction of municipal solid waste (MSW). The composting of lignocellulosic GW is challenging due to its low decomposition rate. Recently, an increasing number of studies that include strategies to optimize GW composting appeared in the literature. This literature review focuses on the physicochemical quality of GW and on the effect of strategies used to improve the process and product quality. A systematic search was carried out, using keywords, and 447 papers published between 2002 and 2018 were identified. After a screening process, 41 papers addressing feedstock quality and 32 papers on optimization strategies were selected to be reviewed and analyzed in detail. The GW composition is highly variable due to the diversity of the source materials, the type of vegetation, and climatic conditions. This variability limits a strict categorization of the GW physicochemical characteristics. However, this research established that the predominant features of GW are a C/N ratio higher than 25, a deficit in important nutrients, namely nitrogen (0.5-1.5% db), phosphorous (0.1-0.2% db) and potassium (0.4-0.8% db) and a high content of recalcitrant organic compounds (e.g. lignin). The promising strategies to improve composting of GW were: i) GW particle size reduction (e.g. shredding and separation of GW fractions); ii) addition of energy amendments (e.g. non-refined sugar, phosphate rock, food waste, volatile ashes), bulking materials (e.g. biocarbon, wood chips), or microbial inoculum (e.g. fungal consortia); and iii) variations in operating parameters (aeration, temperature, and two-phase composting). These alternatives have successfully led to the reduction of process length and have managed to transform recalcitrant substances to a high-quality end-product.

Effects of bean dregs and crab shell powder additives on the composting of green waste

Composting is an effective and economic technology for the recycling of organic waste. In this study, bean dregs (BD) (at 0, 35, and 45%) and crab shell powder (CSP) (at 0, 15, and 25%) were evaluated as additives during the two-stage composting of green waste (GW). The GW used in this experiment mainly consisted of branch cuttings collected during the maintenance of the urban green landscape. Combined additions of BD and CSP improved composting conditions and compost quality in terms of composting temperature, specific surface area, average pore diameter, pH and EC values, carbon dioxide release, ammonia and nitrous oxide emissions, E₄/E₆ ratio, elemental composition and atomic ratios, organic matter degradation, microbial numbers, enzyme activities, compost phytotoxicity, and environmental and economic benefits. The combined addition of 35% BD and 25% CSP to the two-stage composting of GW resulted in the highest quality compost product in only 22 days.

Evaluation of maifanite and silage as amendments for green waste composting

Composting is a popular method for recycling organic solid wastes including agricultural and forestry residues. However, traditional composting method is time consuming, generates foul smells, and produces an immature product. The effects of maifanite (MF; at 0%, 8.5%, and 13.5%) and/or silage (SG; at 0%, 25%, and 45%) as amendments on an innovative, two-stage method for composting green waste (GW) were investigated. The combined addition of MF and SG greatly improved composting conditions, reduced composting time, and enhanced compost quality in terms of composting temperature, bulk density, water-holding capacity, void ratio, pH, cation exchange capacity, ammonia nitrogen content, dissolved organic carbon content, crude fibre degradation, microbial numbers, enzyme activities, nutrient contents, and phytotoxicity. The two-stage composting of GW with 8.5% MF and 45% SG generated the highest quality and the most mature compost product and did so in only 21 days. With the optimized composting, the degradation rate of cellulose and hemicellulose reached 46.3 and 82.3%, respectively, and the germination index of Chinese cabbage and lucerne was 153 and 172%, respectively, which were all far higher than values obtained with the control. The combined effects of MF and SG on GW composting have not been previously explored, and this study therefore provided new and practical information. The comprehensive analyses of compost properties during and at the end of the process provided insight into underlying mechanisms. The optimized two-stage composting method may be a viable and sustainable alternative for GW management in that it converts the waste into a useful product.

Using cow dung and spent coffee grounds to enhance the two-stage co-composting of green waste

The objective of this study was to determine the effects of cow dung (CD) (at 0%, 20%, and 35%) and/or spent coffee grounds (SCGs) (at 0%, 30%, and 45%) as amendments in the two-stage co-composting of green waste (GW); the percentages refer to grams of amendment per 100g of GW based on dry weights. The combined addition of CD and SCGs improved the conditions during co-composting and the quality of the compost product in terms of composting temperature; particle-size distribution; mechanical properties; nitrogen changes; low-molecular weight compounds; humic substances; the degradation of lignin, cellulose, and hemicellulose; enzyme activities; the contents of total Kjeldahl nitrogen, total phosphorus, and total potassium; and the toxicity to germinating seeds. The combined addition of 20% CD and 45% SCGs to GW resulted in the production of the highest quality compost product and did so in only 21days.

Recent developments in biochar utilization as an additive in organic solid waste composting: A review

In recent years, considerable studies have been devoted to investigating the effect of biochar application on organic solid waste composting. This review provides an up-to-date overview of biochar amendment on composting processes and compost quality. Biochar production, characteristics, and its application coupled with the basic concepts of composting are briefly introduced before detailing the effects of biochar addition on composting. According to recent studies, biochar has exhibited great potential for enhancing composting. It is evident that biochar addition in composting can: (1) improve compost mixture physicochemical properties, (2) enhance microbial activities and promote organic matter decomposition, (3) reduce ammonia (NH₃) and greenhouse gas (GHG) emissions, and (4) upgrade compost quality by increasing the total/available nutrient content, enhancing maturity, and decreasing phytotoxicity. Despite that, further research is needed to explore the mechanism of biochar addition on composting and to evaluate the agricultural and environmental performances of co-composted biochar compost.

Comparison of biochar, zeolite and their mixture amendment for aiding organic matter transformation and nitrogen conservation during pig manure composting

The aim of this work was to compare the impact of biochar, zeolite and their mixture on nitrogen conservation and organic matter transformation during pig manure (PM) composting. Four treatments were set-up from PM mixed with wheat straw and then applied 10% biochar (B), 10% zeolite (Z) and 10% biochar+10% zeolite (B+Z) into composting mixtures (dry weight basis), while treatment without additives applied used as control. Results indicated that adding B, Z and B+Z could obviously (p<0.05) improve the organic matter degradation and decrease the nitrogen loss. And combined addition of B and Z further promoted the organic matter humification and reduced the heavy metals mobility. Meanwhile the highest mitigation of ammonia (63.40%) and nitrogen dioxide (78.13%) emissions was observed in B+Z added treatment. Comparison of organic matter transformation, nitrogen conservation and compost quality indicated that the combined use of biochar and zeolite could be more useful for PM composting.

Addition of seaweed and bentonite accelerates the two-stage composting of green waste

Green waste (GW) is an important recyclable resource, and composting is an effective technology for the recycling of organic solid waste, including GW. This study investigated the changes in physical and chemical characteristics during the two-stage composting of GW with or without addition of seaweed (SW, Ulva ohnoi) (at 0, 35, and 55%) and bentonite (BT) (at 0.0, 2.5%, and 4.5%). During the bio-oxidative phase, the combined addition of SW and BT improved the physicochemical conditions, increased the respiration rate and enzyme activities, and decreased ammonia and nitrous oxide emissions. The combination of SW and BT also enhanced the quality of the final compost in terms of water-holding capacity, porosity, particle-size distribution, water soluble organic carbon/organic nitrogen ratio, humification, nutrient content, and phytotoxicity. The best quality compost, which matured in only 21days, was obtained with 35% SW and 4.5% BT.