Arsenic removal by periphytic biofilm and its application combined with biochar

Bioaccumulation of arsenic in fish (Labeo rohita) in presence of periphyton: ameliorative effect on oxidative stress, physiological condition, immune response and risk assessment

The present study explores the use of periphyton to ameliorate toxic properties of arsenic (As) to Labeo rohita and also assesses the human food safety aspects. Fish were introduced to arsenite [As(III)] contaminated water (0.3 and 3 mg/L) along with periphyton. Biochemical, physiological and immunological parameters, including gene expression, were assessed after 30 days of exposure. Periphyton incorporation significantly improved (p < 0.05) the adverse effects of As on respiration, NH3 excretion and brain AChE activity by reducing oxidative stress and As bioaccumulation. The presence of periphyton in As(III) exposed fish (3 mg/L) increased the immune response (Immunoglobulin M and Complement C3) in the serum and the regulation of the respective immune genes in the anterior kidney was found to be similar to the control. A speciation study using LC-ICP-MS confirmed the high accumulation of As by periphyton (5.0-31.9 μg/g) as arsenate [As (V)], resulting in a lower amount of As in fish muscle. The calculated human health risk indices, Target Hazard Quotient (THQ) and Target Cancer risk (TCR) indicate that fish grown in periphyton-treated water may lower the human health risks associated with As. The study signifies the importance of periphyton-based aquaculture systems in As contaminated regions for safe fish production with enhanced yield.

Application of biological soil crusts for efficient cadmium removal from acidic mine wastewater

Utilizing an acid-resistant biological soil crust (BSC) species that we discovered, we developed a device capable of efficiently removing cadmium (Cd) from mine wastewater with varying levels of acidity. Our research has demonstrated that this particular BSC species adapts to acidic environments by regulating the balance of fatty acids and acid-resistant enzymes. At a Cd concentration of 5 mg/L, the BSC grew well. When the initial Cd concentration was 2 mg/L, and the flow rate was set at 1 mL/min (at pH levels of 3, 4, and 5), BSC had a high removal rate of Cd, and the removal rate increased with the increase of pH (from 90% to 97%). Chemisorption is the primary removal mechanism in the initial stage, where the functional groups and minerals on the surface of the BSC play a significant role. In addition, BSC also adapts to Cd stress by changing bacterial community structure. It was discovered through infrared spectroscopy and two-dimensional correlation analysis that hydrophilic groups, specifically phosphate and carboxyl groups, exhibited the highest reactivity during the Cd binding process. Protein secondary structure analysis confirmed that as the pH increased, the adsorption capacity of the BSC increased; making biofilm formation easier. This study presents a novel approach for the treatment of acidic wastewater.

Revealing the response characteristics of periphyton biomass and community structure to sulfamethoxazole exposure in aquaculture water: The perspective of microbial network relationships

The widespread application of sulfonamide antibiotics in aquaculture has raised concerns about their adverse environmental impacts. Periphyton plays a crucial role in the aquatic ecosystem. In this study, we examined sulfamethoxazole (SMX) effects on the community structure and interactions of periphyton in simulated aquaculture water. Our findings indicated that the total biomass of periphyton decreased, while the biomass of periphytic algae and the secretion of extracellular polymeric substances (EPS) increased at 0.7 × 10-3 mg/L. Under higher SMX concentrations (5 mg/L and 10 mg/L), periphyton growth was severely inhibited, the microbial community structure of periphyton were sharply altered, characterized by the cyanobacteria growth suppression and decrease in the diversity index of community. Furthermore, elevated SMX concentrations (5 mg/L and 10 mg/L) increased the ratio of negative relationships from 45.4% to 49.4%, which suggested that high SMX concentrations promoted potential competition among microbes and disrupted the microbial food webs in periphyton. The absolute abundance of sul1 and sul2 genes in T2 and T3 groups were 2-3 orders of magnitude higher than those in control group after 30 days of SMX exposure, which elevated the risk of resistance gene enrichment and dissemination in the natural environment. The study contributes to our understanding of the detrimental effects of antibiotic pollution, which can induce changes in the structure and interaction relationship of microbial communities in aquaculture water.

Biochar as Alternative Material for Heavy Metal Adsorption from Groundwaters: Lab-Scale (Column) Experiment Review

The purpose of this manuscript is to present a review of laboratory experiments (including methodology and results) that use biochar, a specific carbon obtained by a pyrolysis process from different feedstocks, as an alternative material for heavy metal adsorption from groundwater. In recent years, many studies have been conducted regarding the application of innovative materials to water decontamination to develop a more sustainable approach to remediation processes. The use of biochar for groundwater remediation has particularly attracted the interest of researchers because it permits the reuse of materials that would be otherwise disposed of, in accordance with circular economy, and reduces the generation of greenhouse gases if compared to the use of virgin materials. A review of the different approaches and results reported in the current literature could be useful because when applying remediation technologies at the field scale, a preliminary phase in which the suitability of the adsorbent is evaluated at the lab scale is often necessary. This paper is therefore organised with a short description of the involved metals and of the biochar production and composition. A comprehensive analysis of the current knowledge related to the use of biochar in groundwater remediation at the laboratory scale to obtain the characteristic parameters of the process that are necessary for the upscaling of the technology at the field scale is also presented. An overview of the results achieved using different experimental conditions, such as the chemical properties and dosage of biochar as well as heavy metal concentrations with their different values of pH, is reported. At the end, numerical studies useful for the interpretation of the experiment results are introduced.

Influence of extracellular polymeric substances on arsenic bioaccumulation and biotransformation in biofilms

It is well recognized that biofilms can biosorb and biotransform heavy metals in aquatic environments. However, the effects of extracellular polymeric substance (EPS) on inorganic arsenic (As) bioaccumulation and biotransformation in biofilms are still unrevealed and need to be investigated. In order to explore the above scientific issues, the As accumulation and speciation in EPS-containing or EPS-free biofilms and growth medium under As(V)/As(III) exposure conditions were measured. After the removal of EPS, the amount of As uptake (Asup) and As adsorption (Asad) in biofilms were significantly reduced, no matter whether exposed to As(V) or As(III). FTIR analysis further suggested that the interaction between these functional groups with As was limited after the removal of EPS. In the EPS-containing biofilms, the Asad was mainly As(V) with low toxicity. However, after the removal of EPS, the Asad was mainly As(III) with high fluidity, and no methylated As was found. Moreover, the removal of EPS inhibited As(III) oxidation and methylation by biofilms, resulting in the decrease of As(V) and methylated As in the growth medium. The findings of this study emphasized the essential impact of EPS on the biosorption and biotransformation of As in biofilms. This study provides a unique understanding of the role of biofilms in As biogeochemical cycle, and water quality purification function in water environments.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

A mini-review on indigenous microbial biofilm from various wastewater for heavy-metal removal - new trends

Biofilm, as a form of the microbial community in nature, represents an evolutionary adaptation to the influence of various environmental conditions. In nature, the largest number of microorganisms occur in the form of multispecies biofilms. The ability of microorganisms to form a biofilm is one of the reasons for antibiotic resistance. The creation of biofilms resistant to various contaminants, on the other hand, improves the biological treatment process in wastewater treatment plants. Heavy metals cannot be degraded, but they can be transformed into non-reactive and less toxic forms. In this process, microorganisms are irreplaceable as they interact with the metals in a variety of ways. The environment polluted by heavy metals, such as wastewater, is also a source of undiscovered microbial diversity and specific microbial strains. Numerous studies show that biofilm is an irreplaceable strategy for heavy metal removal. In this review, we systematize recent findings regarding the bioremediation potential of biofilm-forming microbial species isolated from diverse wastewaters for heavy metal removal. In addition, we include some mechanisms of action, application possibilities, practical issues, and future prospects.

Emerging high-ammonia‑nitrogen wastewater remediation by biological treatment and photocatalysis techniques

The bacterial and photocatalysis techniques have been widely applied into the remediation of ammonia nitrogen wastewater. Although traditional microbial methods had been verified useful; more efficient, energy-saving and controllable candidate treatment methods are still urgently needed to cover the increasingly diverse ammonia nitrogen pollution cases. The bacterial treatment technique for ammonia nitrogen mainly depends on the ammonia nitrogen oxidation-reduction (e.g. nitrification, denitrification) by nitrifying bacteria and denitrifying bacteria, but these reactions suffer from slow denitrifying kinetic process and uncontrolled disproportionation reaction. In comparison, the photocatalysis technique based on photoelectrons is more efficient and has some advantages, such as low temperature reaction and long life, while the photocatalysis technique can not perform multiple complex biochemical reactions. Despite much scientific knowledge obtained about this issue recently, such research has yet not been widely adopted in the industry because of many concerns about subsequent catalyst stability and economic feasibility. This review summarized and discussed the very recent achievements and key problems on remediation of high-ammonia‑nitrogen wastewater and oxidation driven by bacterial treatment and photocatalysis techniques, as well as the most promising future directions for these two techniques, especially the potential of jointly bacterial-photocatalysis techniques.

Unraveling the role of multi-walled carbon nanotubes in a corn-soil system: Plant growth, oxidative stress and heavy metal(loid)s behavior

In the age of nanotechnological advancement, carbon nanotubes (CNTs) are drawing global attention. However, few studies have been published on the crop growth responses to CNTs in heavy metal(loid)s contaminated environments. A pot experiment was conducted to assess the effect of multi-walled carbon nanotubes (MWCNTs) on plant development, oxidative stress, and heavy metal(loid)s behavior in a corn-soil system. Corn (Zea mays L.) seedlings were cultivated in soil containing Cadmium (Cd) and Arsenic (As) that had been primed with 0, 100, 500, and 1000 mg kg^-1 MWCNTs. The application of 100 and 500 mg kg^-1 MWCNTs improved shoot length by 6.45% and 9.21% after 45 days, respectively. Total plant dry biomass increased by 14.71% when treated with 500 mg kg^-1 MWCNTs but decreased by 9.26% when exposed to 1000 mg kg^-1 MWCNTs. MWCNTs treatment did not affect Cd accumulation in plants. On the other hand, the bio-concentration factor of As was inversely associated with plant growth (p < 0.05), which was declined in MWCNTs treatments. Oxidative stress was aggravated when plants were exposed to MWCNTs, thus activating the antioxidant enzymes system in the corn. In contrast, TCLP-extractable Cd and As in soil significantly decreased than in the control. Additionally, the soil nutrients were changed under MWCNTs treatments. Our findings also revealed that a particular concentration of MWCNTs can mitigate the toxicity of Cd and As in corn seedlings. Therefore, these results suggest the prospective application of CNTs in agricultural production, ensuring environmental and soil sustainability.

Application of BCXZM Composite for Arsenic Removal: EPS Production, Biotransformation and Immobilization of Bacillus XZM on Corn Cobs Biochar

This study determined the effect of Bacillus XZM extracellular polymeric substances (EPS) production on the arsenic adsorption capacity of the Biochar-Bacillus XZM (BCXZM) composite. The Bacillus XZM was immobilized on corn cobs multifunction biochar to generate the BCXZM composite. The arsenic adsorption capacity of BCXZM composite was optimized at different pHs and As(V) concentrations using a central composite design (CCD)2² and maximum adsorption capacity (42.3 mg/g) was attained at pH 6.9 and 48.9 mg/L As(V) dose. The BCXZM composite showed a higher arsenic adsorption than biochar alone, which was further confirmed through scanning electron microscopy (SEM) micrographs, EXD graph and elemental overlay as well. The bacterial EPS production was sensitive to the pH, which caused a major shift in the -NH, -OH, -CH, -C=O, -C-N, -SH, -COO and aromatic/-NO₂ peaks of FTIR spectra. Regarding the techno economic analysis, it was revealed that USD 6.24 are required to prepare the BCXZM composite to treat 1000 gallons of drinking water (with 50 µg/L of arsenic). Our findings provide insights (such as adsorbent dose, optimum operating temperature and reaction time, and pollution load) for the potential application of the BCXZM composite as bedding material in fixed-bed bioreactors for the bioremediation of arsenic-contaminated water in future.

Indigenous cyanobacteria enhances remediation of arsenic-contaminated soils by regulating physicochemical properties, microbial community structure and function in soil microenvironment

Biocrust was widely used for the immobilization and removal of arsenic (As) in drainage systems of rice fields and mining areas. In this study, the role of an indigenous cyanobacteria (Leptolyngbya sp. XZMQ) was explored in the bioremediation of As-contaminated farmland and tailing soil. After 80 d of inoculation with cyanobacteria, total As (As(T)) accumulated in the cyanobacterial crust of farmland and tailing soil was 279.89 mg kg^-1 and 269.57 mg kg^-1, respectively, and non-EDTA exchangeable fraction was the major fraction of it. The As(T) in farmland and tailing soil of micro-environment decreased by 10.76% and 12.73%, respectively. Meanwhile, the available As (As(a)) decreased by 21.25% and 27.65%, respectively. The XRD results showed that hematite and SiO₂ existed in cyanobacterial crust of farmland and tailing soil. FTIR spectra indicated that the adsorption of As in cyanobacterial crust was mediated by OH and CO. After inoculation of Leptolyngbya sp. XZMQ, in subcrust soil, As biotransformation gene aioA was the most abundant, followed by arsM. The dominant phyla of soil biota were Proteobacteria, Cyanobacteria, Actinobacteria, and Bacteroiota, which could play critical roles in shaping aioA and arsM harboring microbe communities in soil. Redundancy analysis (RDA) showed that soil organic carbon (OC), pH, and chlorophyll a (Chl a) were the most important environmental factors in altering soil bacterial communities. Correlation analysis showed the Leptolyngbya had a positive correlation with Chl a, effective nitrogen (N(a)), electrical conductivity (EC), OC, pH in the soil, respectively, while it had a significant negative correlation with As(a), As(III) and As(T). These results emphasized on the significance of cyanobacteria in the behavior of As in mine soils and offered a promising strategy for bioremediation of As-contaminated soil in the mining area.

Review on rewiring of microalgal strategies for the heavy metal remediation - A metal specific logistics and tactics

Phycoremediation of heavy metals are gaining much attention and becoming an emerging practice for the metal removal in diverse environmental matrices. Still, the physicochemical state of metal polluted sites is often found to be complex and haphazard in nature due to the irregular discharge of wastes, that leads to the lack of conjecture on the application of microalgae for the metal bioremediation. Besides, the foresaid issues might be eventually ended up with futile effect to the polluted site. Therefore, this review is mainly focusing on interpretative assessment on pre-existing microalgal strategies and their merits and demerits for selected metal removal by microalgae through various process such as natural attenuation, nutritional amendment, chemical pretreatment, metal specific modification, immobilization and amalgamation, customization of genetic elements and integrative remediation approaches. Thus, this review provides the ideal knowledge for choosing an efficient metal remediation tactics based on the state of polluted environment. Also, this in-depth description would provide the speculative knowledge of counteractive action required for pass-over the barriers and obstacles during implementation. In addition, the most common metal removal mechanism of microalgae by adsorption was comparatively investigated with different metals through the principal component analysis by grouping various factor such as pH, temperature, initial metal concentration, adsorption capacity, removal efficiency, contact time in different microalgae. Conclusively, the suitable strategies for different heavy metals removal and addressing the complications along with their solution is comprehensively deliberated for metal removal mechanism in microalgae.

Modeling of the As (III) adsorption using Fe impregnated polyethylene terephthalate char matrix: A statistical approach

The present research aimed to analyse the impact of economical Fe impregnated polyethylene terephthalate (PET) char (PETC-Fe) for adsorption of As (III) through series of column experiments. For an inlet arsenite concentration of 1,000 μg/L, PETC-Fe exhibits excellent uptake capacity of 1,892 μg/g. Central composite design (CCD) in response surface methodology (RSM) was used to evaluate the influence of various process variables on the response function (breakthrough time) for optimization and assessment of interaction effects. The breakthrough time is more responsive to influent As (III) concentration and bed height than inlet flow rate, according to the perturbation plot. Adams-Bohart, Bed Depth Service Time (BDST) model, and Thomas models were used to model the dynamics of the adsorption system. The BDST model suited the experimental data well in the early part of the breakthrough curve, but there were minor variations over the breakpoints. Despite the fact that the experimental values and the data sets estimated using the Adams-Bohart model followed a similar pattern, they differed slightly. The PETC-Fe was found to be a sustainable and highly economical adsorbent, with a desorption performance of more than 97%, indicating the adsorbent's reusability. This adsorbent's excellent As (III) uptake capacity and regeneration performance imply that it might be used in industrial/domestic applications, and the information obtained could aid in future scaling up of the adsorption system.

Modified Biochars and Their Effects on Soil Quality: A Review

Biochar (BC) has attracted attention due to its impacts on soil quality by enhancing soil fertility, carbon storage and contaminants immobilization. BC also induces changes in microbial community structure and enhances crop productivity in long term scenarios compared to many other organic amendments. However, information related to the role of modified BCs in altering the soil quality is still scarce. BC can be modified by using physical, chemical and microbial methods. Modified BC can change the functional groups, pore size, pore structure, surface area and chemical properties of soil, which plays a key role in changing the soil quality. The addition of modified BCs as soil amendment increased soil CEC (cation exchange capacity), EC (electron conductivity), pH, organic matter, hydraulic conductivity, soil porosity, infiltration rate, microbial activities (enzymes and community), nutrient profile and gas exchange properties, but it varies according to the soil structure and pervading environmental conditions. This study provides a basis for effective practical approaches to modifying BCs for improving soil quality.

Ball-milled biochar can act as a preferable biocompatibility material to enhance phenanthrene degradation by stimulating bacterial metabolism

The aim of this study was to evaluate the impact of different concentrations of ball-milled biochar pyrolyzed at 300-700 °C on the lethality, growth, metabolism, and degradability of gram-negative petroleum-degrading bacteria. BM-biochar was not toxic to Acinetobacter venetianus, only slowing the growth rate and extending the logarithmic phase. The ability of A. venetianus to produce extracellular polymeric substances (EPS) and biosurfactants was positive with ROS level. The highest degradation efficiency of phenanthrene (PHE) was 2.84-fold that of the control. Mechanism analysis revealed that increased EPS stimulated the adsorption of PHE and biosurfactant enhanced PHE solubility. The improved PHE biodegradability of A. venetianus through phthalic acid pathway is mainly owing to the intensify of PHE bioavailability and accessibility. These findings provide new insights into effects of BM-biochar on cellular responses and indicate that BM-biochar can act as a biocompatible material to enhance the degradation of organic pollutants.

Removal of Arsenate From Groundwater by Cathode of Bioelectrochemical System Through Microbial Electrosorption, Reduction, and Sulfuration

Arsenate [As(V)] is a toxic metalloid and has been observed at high concentrations in groundwater globally. In this study, a bioelectrochemical system (BES) was used to efficiently remove As(V) from groundwater, and the mechanisms involved were systematically investigated. Our results showed that As(V) can be efficiently removed in the BES cathode chamber. When a constant cell current of 30 mA (I_cell, volume current density = 66.7 A/m³) was applied, 90 ± 3% of total As was removed at neutral pH (7.20–7.50). However, when I_cell was absent, the total As in the effluent, mainly As(V), had increased approximately 2–3 times of the As(V) in influent. In the abiotic control reactor, under the same condition, no significant total As or As(V) removal was observed. These results suggest that As(V) removal was mainly ascribed to microbial electrosorption of As(V) in sludge. Moreover, part of As(V) was bioelectrochemically reduced to As(III), and sulfate was also reduced to sulfides [S(–II)] in sludge. The XANES results revealed that the produced As(III) reacted with S(–II) to form As₂S₃, and the residual As(III) was microbially electroadsorbed in sludge. This BES-based technology requires no organic or chemical additive and has a high As(V) removal efficiency, making it an environment-friendly technique for the remediation of As-contaminated groundwater.

A review on biofiltration techniques: Recent advancements in the removal of volatile organic compounds and heavy metals in the treatment of polluted water

Good quality of water determines the healthy life of living beings on this earth. The cleanliness of water was interrupted by the pollutants emerging out of several human activities. Industrialization, urbanization, heavy population, and improper disposal of wastes are found to be the major reasons for the contamination of water. Globally, the inclusion of volatile organic compounds (VOCs) and heavy metals released by manufacturing industries, pharmaceuticals, and petrochemical processes have created environmental issues. The toxic nature of these pollutants has led researchers, scientists, and industries to exhibit concern towards the complete eradication of them. In this scenario, the development of wastewater treatment methodologies at low cost and in an eco-friendly way had gained importance at the international level. Recently, bio-based technologies were considered for environmental remedies. Biofiltration based works have shown a significant result for the removal of volatile organic compounds and heavy metals in the treatment of wastewater. This was done with several biological sources such as bacteria, fungi, algae, plants, yeasts, etc. The biofiltration technique is cost-effective, simple, biocompatible, sustainable, and eco-friendly compared to conventional techniques. This review article provides deep insight into biofiltration technologies engaged in the removal of volatile organic compounds and heavy metals in the wastewater treatment process.

Biological soil crusts alleviate the stress of arsenic on rice germination and the underlying immobilization mechanisms

The high concentration of arsenic (As) in paddy soil has seriously threatened the growth of rice and human food safety. Biological soil crusts (BSC), which are ubiquitous in paddy fields, have been shown a high ability to capture trace metal elements. In the present study, we investigated the effectiveness and mechanism of BSC for immobilizing As, and tested their potential to alleviate the stress of As on rice germination. It is found that BSC can remove 77.8% of arsenic in solution with 3.5 mg L^-1 initial As concentration. The As content in BSC reached 514.5 mg kg^-1 after 216 h exposure, and the entrapped As was mainly distributed in BSC as a non-EDTA-exchangeable fraction, which might be intracellularly accumulated. Proteobacteria and Bacteroidetes were the dominant phyla in BSC after being exposed to As, playing a significant role in tolerating As and As biogeochemical cycling. The presence of BSC notably promoted the germination rate (18.3%) and dry biomass (103.4%) of rice seeds under 3.5 mg L^-1 As stress while reducing the As content in plant roots (8.2-34.3%) and shoots (8.7-47.6%). These findings demonstrate that BSC have a great entrapping effect on As and highlight the importance of BSC in alleviating the stress on rice germination by As, providing a potential nature-based and low-cost strategy to decontaminate paddy fields polluted with As.

Biochar composite with microbes enhanced arsenic biosorption and phytoextraction by Typha latifolia in hybrid vertical subsurface flow constructed wetland

Arsenic contamination of ground water is a worldwide issue, causing a number of ailments in humans. As an engineered and integrated solution, a hybrid vertical subsurface flow constructed wetland (VSSF-CW) amended with BCXZM composite (Bacillus XZM immobilized on rice husk biochar), was found effective for the bioremediation of arsenic contaminated water. Biological filter was prepared by amending top 3 cm of VSSF-CW bed with BCXZM. This filter scavenged ∼64% of total arsenic and removal efficiency of ∼95% was achieved by amended and planted (As + P + B) VSSF-CW, while non-amended (As + P) VSSF-CW showed a removal efficiency of ∼55%. The unplanted and amended (As + B) VSSF-CW showed a removal efficiency of ∼70%. The symbiotic association of Bacillus XZM, confirmed by SEM micrographs, significantly (p ≤ 0.05) reduced reactive oxygen species (ROS) and malondialdehyde (MDA) accumulation in Typha latifolia, hence, increasing the plant growth (2 folds). An increase in the indole acetic acid (IAA) and arsenic accumulation in plant was also observed in As + P + B system. The removal efficiency of the system was compromised after 4th consecutive cycle and 48 h was observed as optimum retention time. The FTIR-spectra showed the involvement of -N-H bond, carboxylic acids, -CH₂ stretching of -CH₂ and -CH_3, carbonyl groups, -C-H, C-O-P and C-O-C, sulphur/thiol and phosphate functional groups in the bio-sorption of arsenic by BCXZM filter. Our study is a first reported on the simultaneous phytoextraction and biosorption of arsenic in a hybrid VSSF-CW. It is proposed that BCXZM can be applied effectively in CWs for the bioremediation of arsenic contaminated water on large scale.

New directions and challenges in engineering biologically-enhanced biochar for biological water treatment

Cost-effective, efficient, and sustainable water treatment solutions utilising existing materials and technology will make it easier for low and middle-income countries to adopt them, improving public health. The ability of biochar to mediate and support microbial degradation of contaminants, combined with its carbon-sequestration potential, has attracted attention in recent years. Biochar is a possible candidate for use in cost-effective and sustainable biological water treatment, especially in agrarian economies with easy access to abundant biomass in the form of crop residues and organic wastes. This review evaluates the scope, potential benefits (economic and environmental) and challenges of sustainable biological water treatment using 'Biologically-Enhanced Biochar' or BEB. We discuss the various processes occurring in BEB systems and demonstrate the urgent need to investigate microbial degradation mechanisms. We highlight the need to correlate biochar properties to biofilm development, which can eventually determine process efficiency. We also demonstrate the various opportunities in adopting BEB as a cheaper and more viable alternative in Low and Middle Income Countries and compare it to the current benchmark, 'Biological Activated Carbon'. We focus on the recent advances in the areas of data science, mathematical modelling and molecular biology to systematically and sustainably design BEB filters, unlike the largely empirical design approaches seen in water treatment. 'Sequential biochar systems' are introduced as specially designed end-of-life techniques to lower the environmental impact of BEB filters and examples of their integration into biological water treatment that can fulfil zero waste criteria for BEBs are given.

Arsenic Remediation through Sustainable Phytoremediation Approaches

Arsenic contamination of the environment is a serious problem threatening the health of millions of people exposed to arsenic (As) via drinking water and crops grown in contaminated areas. The remediation of As-contaminated soil and water bodies needs to be sustainable, low-cost and feasible to apply in the most affected low-to-middle income countries, like India and Bangladesh. Phytoremediation is an aesthetically appreciable and successful approach that can be used for As decontamination with use of the best approach(es) and the most promising plant(s). However, phytoremediation lacks the required speed and sometimes the stress caused by As could diminish plants’ potential for remediation. To tackle these demerits, we need augment plants’ potential with appropriate technological methods including microbial and nanoparticles applications and genetic modification of plants to alleviate the As stress and enhance As accumulation in phytoremediator plants. The present review discusses the As phytoremediation prospects of soil and water bodies and the usefulness of various plant systems in terms of high biomass, high As accumulation, bioenergy potential, and economic utility. The potential and prospects of assisted phytoremediation approaches are also presented.

Periphyton enhances arsenic release and methylation at the soil-water interface of paddy soils

Periphyton is ubiquitous in rice paddy fields, however its role in paddy soil arsenic (As) biogeochemistry remains unexplored. In this study, microcosm incubations and extensive field sampling were used to better understand the roles of periphyton on As mobility and transformation at the soil-water interface. Microcosm incubations revealed that periphyton on the paddy soil surface enhanced As release to water and increased methylated As contents at the soil-water interface. Experimental additions of dissolved phosphate did not significantly affect these processes. The presence of periphyton increased the dissolved organic carbon (DOC) content of the surface soil which may have played a role in the increased As mobility. However, the increase in methylated As species at the soil-water interface is indicative of detoxification processes of As by periphyton. The results from the field study revealed a high abundance and diversity of As biotransformation and detoxification genes in periphyton. Genera of Kineosporia, Limisphaera, Ornatilinea, Ktedonosporobacter and Anaerolinea played key roles in shaping arsM harboring microbe communities in field periphyton. These results highlight the importance of periphyton in the behavior of As in paddy soils and can potentially facilitate improved management of As contamination in paddy soils.

The biotransformation of arsenic by spent mushroom compost - An effective bioremediation agent

Spent mushroom compost (SMC) is a lignocellulose-rich waste material commonly used in the passive treatment of heavy metal-contaminated environments. In this study, we investigated the bioremediation potential of SMC against an inorganic form of arsenic, examining the individual abiotic and biotic transformations carried out by SMC. We demonstrated, that key SMC physiological groups of bacteria (denitrifying, cellulolytic, sulfate-reducing, and heterotrophic) are resistant to arsenites and arsenates, while the microbial community in SMC is also able to oxidize As(III) and reduce As(V) in respiratory metabolisms, although the SMC did not contain any As. We showed, that cooperation between arsenate and sulfate-reducing bacteria led to the precipitation of As_xS_y. We also found evidence of the significant role organic acids may play in arsenic complexation, and we demonstrated the occurrence of As-binding proteins in the SMC. Furthermore, we confirmed, that biofilm produced by the microbial community in SMC was able to trap As(V) ions. We postulated, that the above-mentioned transformations are responsible for the sorption efficiency of As(V) (up to 25%) and As(III) (up to 16%), as well as the excellent buffering properties of SMC observed in the sorption experiments.

Insights into the molecular transformation in the dissolved organic compounds of agro-waste-hydrochars by microbial-aging using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Hydrochars-based dissolved organic matters (DOM) are easily available to organisms and thus have important influence on the biota once applying hydrochars as environment amendment. Thus, positive modifications on molecular composition of DOM is indispensable before hydrochars application. In this study, the impacts of microbial-aging by anaerobic fermentation on DOM of agro-waste-hydrochars was systematically assessed. Results revealed that microbial-aging caused lower DOM release but higher DOM molecular diversity. Moreover, microbial-aging resulted in the production of more biodegradable compounds, including lipids and proteins, and reduced the aromaticity of DOM. The highly oxygenated molecules (O/C > 0.6) were shifted into lower-order ones in the hydrochars-based DOM, suggesting the transformation of hydrophilic compounds into hydrophobic ones. Additionally, microbial-aging promoted the degradation of phenols by 99.0-98.9%, phenolic acids 37.8-73.5%, and polycyclic aromatic hydrocarbons by 83.4-90.4% in hydrochar-based DOM. Overall, this study demonstrates that microbial-aging changes the molecular characteristics of hydrochars-based DOM in a positive manner.

Sorption and transformation of arsenic by extracellular polymeric substances extracted from Synechocystis sp. PCC6803

Cyanobacteria widely distribute in the aqueous ecosystem and produce abundant extracellular polymeric substances (EPS), yet little is known about how the quantity and composition of cyanobacterial EPS change upon As exposure, and what are functions of these complex biopolymers in the As sorption and transformation processes. Here we extracted the EPS from Synechocystis sp. PCC6803, characterized their properties, quantified their components upon exposure to arsenite (As^(III))/arsenate (As^(V)) treatments, and investigated As binding and speciation as affected by the levels of EPS and solution pH. The total binding sites, zeta potential and reducing power of EPS were 17.47 mmol g^-1, -19.72 mV and 1.71. The amounts of EPS increased by 22-65.3% and 13.8-39% when the cells were treated with 10-500 μM As^(III) and As^(V) respectively. The As removal was influenced by the EPS doses and solution pH, with 52.8% at pH 8.5 for As^(III) and 49.5% at pH 4.5 for As^(V) at 300 mg L^-1 EPS. In addition, As speciation was transformed with the addition of EPS. As^(V) and As^(III) respectively accounted for 4.9-20.3% and 6.5-26.7% of the total dissolved As after the EPS were added (100-300 mg L^-1) to the As^(III) and As^(V) solutions. Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission fluorescence spectra (3D-EEM) revealed that As was bound to functional groups such as C═O, ─NH, and ─OH in the EPS via surface complexation/hydrophobic interactions. Taken together, this study demonstrated that the EPS extracted from Synechocystis were capable to bind and transform As and could be potentially applied to remove or detoxify As in solutions.

Treatment of aqueous arsenic - A review of biochar modification methods

Arsenic (As) is an ever-present worldwide environmental contamination issue. The process of As sorption for treatment of contaminated waters is regarded as a promising treatment technology approach due to its simplicity and potential for high efficiency. Biochars are carbon-rich porous solids produced by heating of biomasses under low oxygen conditions. Biochars are considered to be environmentally friendly sorbents that can be used to treat various As-containing waters. However, unmodified biochar is generally a poor sorbent for As species due to static repulsion between the As oxyanions and the negatively charged biochar surface. The As sorption capacity of biochars can be substantially improved by treatments using various physical and chemical activation and modification methods. Thus, this review includes 63 research studies using physical and chemical approaches to enhance biochar physicochemical structures and As sorption efficiencies. The effectiveness of each method for altering the characteristics and sorption capacity of biochars is described. This review can help to focus the scope of future As biochar sorption studies and aid researchers in optimization of biochar-based sorbents for As treatment.

A new biochar from cotton stalks for As (V) removal from aqueous solutions: its improvement with H3PO4 and KOH

The present study is the first attempt to evaluate the potential of acid and base activated biochar derived from cotton stalks (CSB) for the removal of As from contaminated water. The CSB was treated with 0.5 M KOH (BCSB) and H₃PO₄ (ACSB) separately to change its surface properties. The CSB, ACSB and BSCB were characterized using BET, FTIR, and SEM analysis to check the effectiveness and insight of the main mechanisms involved in the removal of As. A series of batch experiments was performed using As-contaminated synthetic water and groundwater samples. The effects of initial concentration of As, contact time, dose of the biochars, solution pH, type of the biochar and coexisting ions on the removal of As were investigated. Results revealed that BCSB efficiently removed As (90-99.5%) from contaminated water as compared with ACSB (84-98%) and CSB (81-98%) due to improved surface properties when As concentration was varied from 0.1 to 4.0 mg/L. The experimental data were best fitted with Freundlich adsorption isotherm as compared with Langmuir, Temkin and Dubinin-Radushkevich models. However, kinetic data were well explained with pseudo-second-order kinetic model rather than pseudo-first-order, intra-particle diffusion and Elovich models. The sorption energy indicated that physical adsorption was involved in the removal of As. The comparison of adsorption results with other biochars and their modified forms suggests that activation of CSB with base can be used effectively (4.48 mg/g) as a low-cost adsorbent for maximum removal of As from contaminated aqueous systems.

Bioremediation of heavy metals using microalgae: Recent advances and mechanisms

Five heavy metals namely, arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb) and mercury (Hg) are carcinogenic and show toxicity even at trace amounts, posing threats to environmental ecology and human health. There is an emerging trend of employing microalgae in phycoremediation of heavy metals, due to several benefits including abundant availability, inexpensive, excellent metal removal efficiency and eco-friendly nature. This review presents the recent advances and mechanisms involved in bioremediation and biosorption of these toxic heavy metals utilizing microalgae. Tolerance and response of different microalgae strains to heavy metals and their bioaccumulation capability with value-added by-products formation as well as utilization of non-living biomass as biosorbents are discussed. Furthermore, challenges and future prospects in bioremediation of heavy metals by microalgae are also explored. This review aims to provide useful insights to help future development of efficient and commercially viable technology for microalgae-based heavy metal bioremediation.

Biotic and Abiotic Factors Influencing Arsenic Biogeochemistry and Toxicity in Fluvial Ecosystems: A Review

This review is focused on the biogeochemistry of arsenic in freshwaters and, especially, on the key role that benthic microalgae and prokaryotic communities from biofilms play together in through speciation, distribution, and cycling. These microorganisms incorporate the dominant iAs (inorganic arsenic) form and may transform it to other arsenic forms through metabolic or detoxifying processes. These transformations have a big impact on the environmental behavior of arsenic because different chemical forms exhibit differences in mobility and toxicity. Moreover, exposure to toxicants may alter the physiology and structure of biofilms, leading to changes in ecosystem function and trophic relations. In this review we also explain how microorganisms (i.e., biofilms) can influence the effects of arsenic exposure on other key constituents of aquatic ecosystems such as fish. At the end, we present two real cases of fluvial systems with different origins of arsenic exposure (natural vs. anthropogenic) that have improved our comprehension of arsenic biogeochemistry and toxicity in freshwaters, the Pampean streams (Argentina) and the Anllóns River (Galicia, Spain). We finish with a briefly discussion of what we consider as future research needs on this topic. This work especially contributes to the general understanding of biofilms influencing arsenic biogeochemistry and highlights the strong impact of nutrient availability on arsenic toxicity for freshwater (micro) organisms.

Bismuth impregnated biochar for efficient estrone degradation: The synergistic effect between biochar and Bi/Bi2O3 for a high photocatalytic performance

An innovative advanced oxidation process was successfully developed to photocatalytic-degradation of estrone through the synergistic effect of biochar and Bi/Bi₂O₃ in bismuth-containing photocatalytic biochar (BiPB). The highest reaction rate constant (k_obs) of estrone degradation by BiPB was 0.045 min^-1 under the conditions of initial concentration of estrone =10.4 μmol L^-1, [BiPB] =1 g L^-1, pH = 7.0. The k_obs was almost tenfold and more than 20 times than that of biochar without bismuth impregnation and pristine Bi/Bi₂O₃, respectively. The best photocatalytic performance of BiPB composites for the degradation of estrone was primarily attributed to generation of OH radicals. Impregnation of bismuth helped control the concentration of persistent free radicals (PFRs) and develop a hierarchical porous structure of biochar. The presence of biochar facilitated pre-concentration estrone on BiPB and improved the separation and transfer efficiency of charge carriers. The synergistic effect between biochar and Bi/Bi₂O₃ contributed to the generation of OH radicals for estrone degradation under neutral pH conditions. The transformation pathway of estrone was also proposed based on the measured transformation products in the presence of BiPB. The high efficiency of BiPB composites indicated that this easily-obtained material was promising for estrone-wastewater treatment applications as a low-cost composite photocatalyst.

Arsenic removal from highly-acidic wastewater with high arsenic content by copper-chloride synergistic reduction

A synergistic combination of chloride and copper powder was proposed as a new method to reductively remove arsenic from highly-acidic wastewater with high arsenic content (HAWA). As(III) was reduced to As(0) by copper powder in the presence of chloride and were effectively removed from HAWA. The procedure to remove arsenic was optimized as follows: initial H⁺ concentration of 5 mol L^-1, Cu-to-As molar ratio of 8, Cl-to-As molar ratio of 10, a reaction temperature of 60 °C, copper powder particle size of 68-24 μm, and a stirring speed of 300 r min^-1. Under these optimal conditions, the removal rate of arsenic was close to 100%. Kinetics results suggested that the arsenic removal process was controlled by both diffusion and chemical reactions with an apparent activation energy of 29.78 kJ mol^-1. The XRD results showed that the removed arsenic in the residue existed primarily in the form of AsCu₃ alloy.

Biochar versus bone char for a sustainable inorganic arsenic mitigation in water: What needs to be done in future research?

Arsenic (As) is an emerging contaminant on a global scale posing threat to environmental and human health. The relatively brief history of the applications of biochar and bone char has mapped the endeavors to remove As from water to a considerable extent. This critical review attempts to provide a comprehensive overview for the first time on the potential of bio- and bone-char in the immobilization of inorganic As in water. It seeks to offer a rational assessment of what is existing and what needs to be done in future research as an implication for As toxicity of human health risks through acute and chronic exposure to As contaminated water. Bio- and bone-char are recognized as promising alternatives to activated carbon due to their lower production and activation cost. The surface modification via chemical methods has been adopted to improve the adsorption capacity for anionic As species. Surface complexation, ion exchange, precipitation and electrostatic interactions are the main mechanisms involved in the adsorption of As onto the char surface. However, arsenic-bio-bone char interactions along with their chemical bonding for the removal of As in aqueous solution is still a subject of debate. Hence, the proposed mechanisms need to be scrutinized further using advanced analytical techniques such as synchrotron-based X-ray. Moving this technology from laboratory phase to field scale applications is an urgent necessity in order to establish a sustainable As mitigation in drinking water on a global scale.

Protection Mechanisms of Periphytic Biofilm to Photocatalytic Nanoparticle Exposure

Researchers are devoting great effort to combine photocatalytic nanoparticles (PNPs) with biological processes to create efficient environmental purification technologies (i.e., intimately coupled photobiocatalysis). However, little information is available to illuminate the responses of multispecies microbial aggregates against PNP exposure. Periphytic biofilm, as a model multispecies microbial aggregate, was exposed to three different PNPs (CdS, TiO₂, and Fe₂O₃) under xenon lamp irradiation. There were no obvious toxic effects of PNP exposure on periphytic biofilm as biomass, chlorophyll content, and ATPase activity were not negatively impacted. Enhanced production of extracellular polymetric substances (EPS) is the most important protection mechanism of periphytic biofilm against PNPs exposure. Although PNP exposure produced extracellular superoxide radicals and caused intracellular reactive oxygen species (ROS) accumulation in periphytic biofilm, the interaction between EPS and PNPs could mitigate production of ROS while superoxide dismutase could alleviate biotic ROS accumulation in periphytic biofilm. The periphytic biofilms changed their community composition in the presence of PNPs by increasing the relative abundance of phototrophic and high nutrient metabolic microorganisms (families Chlamydomonadaceae, Cyanobacteriacea, Sphingobacteriales, and Xanthomonadaceae). This study provides insight into the protection mechanisms of microbial aggregates against simultaneous photogenerated and nanoparticle toxicity from PNPs.

Augmenting nitrogen removal by periphytic biofilm strengthened via upconversion phosphors (UCPs)

The application of periphytic biofilm in removing nitrogen from water is limited by the fluctuating nitrogen concentration. Here, we delineate a novel approach to enhance periphytic biofilm performance in nitrogen removal via upconversion luminescence of upconversion phosphors (UCPs). Nitrogen removal rates (14 d) in high nitrogen wastewater (26 mg/L) were significantly improved to 58.6% and 61.4% by UCPs doped with Pr³⁺ and Li⁺ and UCPs doped with Pr³⁺, respectively, and to 95.1% and 95.9% in low nitrogen surface water (2 mg/L), respectively. The stimulation of UCPs optimized the microbial community structure in the periphytic biofilms, and also resulted in good acclimation to use different carbon sources. The enhanced synergic action of cyanobacterial biomass, ratio of Gram +ve to Gram -ve bacteria and carbon source metabolic capacity contributed to the improved nitrogen removal. This novel approach is promising in nitrogen removal from wastewater and surface water with fluctuating initial nitrogen concentration.

Synthesis and Characterization of Novel Fe-Mn-Ce Ternary Oxide⁻Biochar Composites as Highly Efficient Adsorbents for As(III) Removal from Aqueous Solutions

The widespread pollution of water bodies with arsenic (As) necessitates the development of efficient decontamination techniques. To address this issue, we herein prepare Fe-Mn-Ce ternary oxide-biochar composites (FMCBCs) using impregnation/sintering methods and examined their physicochemical properties, morphologies, and As(III) removal performances. The specific surface area of FMCBCs increased with increasing Ce content and enhanced the quantity of surface functional groups (–OH, –COOH). The adsorption of As(III) on FMCBCs was well represented by pseudo-second-order kinetics, and the As(III) adsorption capacity of the best-performing FMCBCs (8.47 mg g⁻¹ for FMCBC₃) exceeded that of BC by a factor of 2.9. At pH = 3, the amount of adsorption of As(III) by FMCBCs reached a maximum, and the increased ionic strength could enhance adsorption capacity of FMCBCs. Moreover, an As(III) removal efficiency of ~99% was observed for FMCBC₃ at a dosage of 8 g L⁻¹, which highlighted its great potential as an absorbent for As(III) removal from contaminated water.

A New Concept of Promoting Nitrate Reduction in Surface Waters: Simultaneous Supplement of Denitrifiers, Electron Donor Pool, and Electron Mediators

The efficiency of biological nitrate reduction depends on the community composition of microorganisms, the electron donor pool, and the electron mediators participating in the biological reduction process. This study aims at creating an in situ system comprising of denitrifiers, electron donors, and electron mediators to reduce nitrate in surface waters. The ubiquitous periphytic biofilm in waters was employed to promote in situ nitrate reduction in the presence of titanium dioxide (TiO₂) nanoparticles (NPs). The nitrate removal rate in the periphytic biofilm and TiO₂ NPs system was significantly higher than the control (only periphytic biofilm or TiO₂ NPs). TiO₂ NPs optimized the community composition of periphytic biofilm for nitrate reduction by increasing the relative abundance of four dominant denitrifying bacteria. Periphytic biofilm showed a substantial increase in extracellular polymeric substance, especially the humic acid and protein content, due to the presence of TiO₂ NPs. The synergistic action of humic acid, protein, denitrifying bacteria of the periphytic biofilm, and TiO₂ NPs contributed to 80% of the nitrate reduction. The protein and humic acid, acting as electron mediators, facilitated the transfer of exogenous electrons from photoexcited TiO₂ NPs to periphytic biofilm containing denitrifiers, which enhanced nitrate reduction in surface waters.