Unraveling the impact of nanoscale zero-valent iron on the nitrogen removal performance and microbial community of anammox sludge

Metagenomic unveils the promotion of mainstream PD-anammox process at lower nZVI concentration and inhibition at higher dosage

The partial-denitrification-anammox (PdNA) process exhibits great potential in enabling the simultaneous removal of NO3--N and NH4+-N. This study delved into the impact of exogenous nano zero-valent iron (nZVI) on the PdNA process. Adding 10 mg L-1 of nZVI increased nitrogen removal efficiency up to 83.12 % and maintained higher relative abundances of certain beneficial bacteria. The maximum relative abundance of Candidatus Brocadia (1.6 %), Candidatus Kuenenia (1.5 %), Ignavibacterium (1.3 %), and Azospira (1.2 %) was observed at 10 mg L-1 of nZVI. However, the greatest relative abundance of Thauera (1.3 %) was recorded under 50 mg L-1. Moreover, applying nZVI selectively enhanced the abundance of NO3--N reductase genes. So, keeping the nZVI concentration at 10 mg L-1 or below is advisable to ensure a stable PdNA process in mainstream conditions. Considering nitrogen removal efficiency, using nZVI in the PD-anammox process could be more cost-effective in enhancing its adoption in industrial and mainstream settings.

Enhancing collaboration of anammox with heterotrophic microbes mediated selectively by iron of different valences: Activities balance, metabolic mechanism, and functional genes regulation

The partial denitrification/anammox (PD/A) process is receiving increasing attention due to its cost-effectiveness advantages. However, effective strategies to alleviate organic matter inhibition and promote anammox activity have been proven to be a big challenge. This study investigated the effects of three types of iron (nano zero-valent iron (nZVI), Fe(II), and Fe(III)) on the PD/A process. It is worth noting that nZVI of 5-50 mg/L and Fe(III) of 5-120 mg/L promoted both PD and anammox activity. Long-term intermittent addition of nZVI (50 mg/L) resulted in a nitrogen removal efficiency of 98.2% in the mixotrophic PD/A system driven by iron and organic matter. The contribution of anammox for nitrogen removal reached as high as 93.8%. The organic carbon demand decreased due to the external electron donor provided by nZVI for PD. Multiple Fe-N metabolic pathways, primarily involving ammonia oxidation by Fe(III) and nitrate reduction by nZVI, play a crucial role in facilitating nitrogen transformation. Conversely, the direct addition of 30-120 mg/L Fe (II) resulted in a significant decrease in pH to below 5.0 and severe inhibition of PD and anammox activity. Following prolonged operation in the presence of nZVI, it was demonstrated that there is an enhancing effect on robust nitrite production for anammox. This was accompanied by a remarkable up-regulation of genes encoding nitrate reductase and iron-transporting proteins dominated by Thauera. Overall, this study has provided an efficient approach for advanced nitrogen removal through organic- and iron-driven anammox processes.

Formation of iron-rich encrustation layer on anammox granules for high load stress resistance: Performance, advantages, and mechanisms

Anaerobic ammonia oxidation (anammox) is a cost-effective technology but its performance can be seriously inhibited by high load stress. This study has created an innovative iron-rich encrustation layer (IEL) on the surface of anammox granules (AnGS) through the addition of a certain amount of nano zero-valent iron. The IEL was formed through the aggregation of a gel network and the binding of iron species with extracellular polymeric substances (EPS), resulting in a significant increase in settling ability, EPS secretion, and heme content. Metagenomic analysis indicated a notable rise in the functional genes associated with nitrogen andiron metabolism in IEL AnGS. Under high load stress, the ammonia removal performance of AnGS without IEL severely declined. In contrast, IEL AnGS exhibited excellent ammonia removal efficiency of over 90%. The IEL served as a protective barrier for AnGS, effectively mitigating the strong shear forces, thereby enhancing their resistance to high load stress.

Fate of iron nanoparticles in anammox system: Dissolution, migration and transformation

Iron nanoparticles (FeNPs) are commonly used in various industrial processes, leading to their release into the environment and eventual entrance into wastewater treatment plants (WWTPs). FeNPs undergo dissolution, migration, and transformation in WWTPs, which can potentially affect the stable operation of anaerobic ammonia oxidation (anammox) systems and may be discharged with wastewater or biomass. To better understand the fate of FeNPs in anammox systems, exposure experiments were conducted using anammox granular sludges (AnGS) and FeNPs. Results demonstrated that FeNPs released Fe2+ upon contact with water, with a portion being bound to functional groups in extracellular polymeric substances (EPS) and the rest entering the bacteria to form highly absorbable substances. A significant amount of FeNPs was observed to cover the surface of AnGS or aggregate and deposit at the bottom of the reactor, eventually converting into Fe3O4 and stably existing within the anammox system. The findings of this study clarify the fate of FeNPs in anammox systems and provide important insights into the stable operation of anammox systems under FeNPs exposure.

Nitrogen removal in improved subsurface wastewater infiltration system: Mechanism, microbial indicators and the limitation of phosphorus

To enhance the nitrogen removal capacity, scrap iron filings and Si-Al porous clay mineral material (PCMW) was used to improve a subsurface wastewater infiltration system (SWIS). The results showed TN and NH₄⁺-N removal efficiencies of improved SWIS were 20.72% and 5.49% higher than those of the control SWIS, respectively. Based on the response of the removal performance, microbial community and function analysis of 16s rRNA amplicon sequencing results, the amending soil matrix substantially enriched the nitrogen removal bacteria (Rhizobiales_Incertae_Sedis and Gemmatimonadaceae), and significantly improved the activities of key enzymes (Hao, NasAB, NarGHI, NirK, NorBC, NirA and NirBD), particularly at co-occurrence zone of nitrification and denitrification (70-130 cm depth). The amending soil matrix not only extended the growth space of microbes, but also provided additional electrons and carbon sources for denitrifying bacteria by regulating the structure and function of the microbial community. In addition, amending soil matrix could enhance phosphate metabolism genes and phosphate solubilizing microbes in the denitrification zone by increasing the phosphorus source, thus strengthening nitrogen metabolism. Nitrospiraceae, Rhizobiales_Incertae_Sedis and Gemmatimonadaceae related to nitrogen removal and Bacillaceae with phosphate-solubilizing ability could be used as microbial indicators of nitrogen removal in SWISs. The reciprocal action of environmental on microbial characteristics exhibited microbial functional were related to DO, Fe²⁺, TOC, TP, TN, NH₄⁺-N and NO₃^--N. Those could be used as physicochemical and biological indicators for application and monitoring of SWIS. In conclusion, this study provided a low-cost and efficient enhancement approach for the application of SWIS in decentralized domestic sewage treatment, and furnished theoretical support for subsequent applications.

Enhancement and mechanisms of iron-assisted anammox process

Anaerobic ammonium oxidation (anammox) is a sustainable biological nitrogen removal technology that has limited large-scale applications owing to the low cell yield and high sensitivity of anammox bacteria (AnAOB). Fortunately, iron-assisted anammox, being a highly practical method could be an effective solution. This review focused on the iron-assisted anammox process, especially on its performance and mechanisms. In this review, the effects of iron in three different forms (ionic iron, zero-valent iron and iron-containing minerals) on the performance of the anammox process were systematically reviewed and summarized, and the strengthening effects of Fe (II) seem to be more prominent. Moreover, the detailed mechanisms of iron-assisted anammox in previous researches were discussed from macro to micro perspectives. Additionally, applicable iron-assisted methods and unified strengthening mechanisms for improving the stability of nitrogen removal and shortening the start-up time of the system in anammox processes were suggested to explore in future studies. This review was intended to provide helpful information for scientific research and engineering applications of iron-assisted anammox.

Activity enhancement and the anammox mechanism under low temperature via PVA-SA and nano Fe2O3-PVA-SA entrapped beads

Anaerobic ammonia-oxidizing bacteria (AAOB) have a long growth time and low activity at low temperatures. In suspended systems, sludge is easily lost, which limits the mainstream application of anaerobic ammonia oxidation (anammox).Entrapment provides effective ideas for solving these problems. In this study, polyvinyl‑sodium alginate (PVA-SA) and nano Fe₂O₃-PVA-SA entrapment beads were prepared to discuss the effectiveness of entrapment enhanced anammox sludge at low temperatures. The differences in the entrapped beads and granules were compared to analyze the strengthening mechanism. The results show that the nitrogen removal performance of granules, PVA-SA and nano Fe₂O₃-PVA-SA entrapped beads, first decreased and then increased during the cooling and low-temperature operation. Nano Fe₂O₃-PVA-SA entrapped beads showed the smallest decline and the highest degree of recovery. Reaction metering ratio (△NO₂^--N/△NH₄⁺-N and △NO₃^--N/△NH₄⁺-N) showed that entrapment could realize Nitrite oxidizing bacteria (NOB) inhibition and improve the activity of denitrifying bacteria (DNB) to promote the removal of total nitrogen by providing a strict anaerobic environment. The results demonstrate that entrapment is beneficial for maintaining the content of heme c, specifically, nano Fe₂O₃ can stimulate its production, and is beneficial for alleviating the reduction of hydrazine dehydrogenase (HDH) enzyme activity. The extracellular polymeric substances (EPS) content and analysis showed that entrapment does not change the composition of EPS, and can maintain the EPS content. Nano Fe₂O₃ can stimulate AAOB to secrete more EPS to maintain sludge stability. From a molecular perspective, entrapment can maintain the expression of functional genes, promote the enrichment of AAOB, thus improving the nitrogen removal performance from the dual perspectives of "quality" and "quantity".

A new concept of waste iron recycling for the enhancement of the anammox process

As a by-product of industry, waste iron scraps (WIS) are low-cost and widely available, which was potential for the development of iron-assisted anammox. In this study, the feasibility of adding WIS to enhance the nitrogen removal of the anammox process (also called WIS-assisted anammox) was demonstrated. Results indicated that the WIS-assisted anammox reactors performed a 15-35% higher nitrogen removal efficiency than that of the control. Compared to the sludge from the control, the sludge from the WIS-assisted anammox reactors had a higher iron content (78-113 g kg^-1 SS) and a better specific anammox activity (10.8-15.5 mg N g^-1 VSS h^-1). The enhanced growth of the anammox bacteria (related to Ca. Kuenenia stuttgartiensis with 99% similarity) in the WIS-assisted anammox reactors was also confirmed by high-throughput sequencing and qPCR. Furthermore, the functional genes predicted by PICRUSt2 revealed a higher level of hydroxylamine oxidoreductase (hao)-like proteins expression of the biomass from the WIS-assisted anammox reactors, implying that the hydroxylamine-related anammox pathway was promoted. Additionally, the observation of cytoplasmic nitrate reductase (narG), copper-containing nitrite reductase (nirK), and nitric oxide reductase (norB) suggested that the introduction of WIS might promote the denitrification ability. This was correlated to the lower ΔNO₃^-/ΔNH₄⁺ ratio observed in these WIS-assisted anammox reactors. Overall, the WIS-assisted anammox offers a sustainable nitrogen removal process for wastewater treatment with waste iron recycling.

Depth-resolved microbial diversity and functional profiles of trichloroethylene-contaminated soils for Biolog EcoPlate-based biostimulation strategy

This study explores the toxic effect of TCE at different depths of sub-surface soil and underpins microbial community-level suitable carbon (C)-sources that provided directionality to the in situ biostimulation effort via augmentation strategy for effective TCE remediation in soil. The impacts on resident microbial communities and their functional profiles that govern the TCE biodegradation process were identified. Highly contaminated PW01 soil (9 m depth) had severely limited microbial diversity and was enriched in Proteobacteria and Firmicutes. The abundance of TCE degradation-associated genera was observed in all contaminated samples, and the abundance of TCE-degradation-related taxa were positively correlated with soil TCE contamination levels. Community-level metabolic activity associated with the utilization of diverse external C-sources was directly influenced by TCE concentration and soil depth. Multivariate data analysis revealed that the functional genus, TCE concentration, and selected available C substrate uptake capacity correlated in soil samples. Pearson's correlation tests revealed that C sources such as L-arginine, phenylethylamine and γ-hydroxybutyric acid utilization trait exhibited significant positive correlations with chloroalkane and chloroalkene degradation pathway abundance. Ultimately, depth and TCE contamination level-associated soil microbiota and their most preferred C-source understanding could add to facilitate effective biostimulation via external nutrient amendment for efficient in situ TCE degradation.

The effects of Fe(III) and Fe(II) on anammox process and the Fe-N metabolism

This study aims to compare the effects of different Fe stress on anammox (anaerobic ammonium oxidation) process, therefore seven identical reactors were operated under different Fe(II)/Fe(III) concentrations. After 38 days of operation, the anammox activity was highest (10.49 ± 0.41 mg-TN/(g-VSS·h)) under conditions of 5 mg/L-Fe(II), while under 30 mg/L-Fe(III) displayed severe inhibition. The results showed that continuous addition of 30 mg/L-Fe(III) would damage the composition of EPS (extracellular polymeric substances) and make anammox bacteria more sensitive to environmental stress. While high Fe(II) concentrations could result in precipitates encasing granular sludge, affecting substrate utilization. Moreover, the results of ΔNO₃^--N/ΔNH₄⁺-N indicated that Fe(II)-dependent nitrate reduction was induced in reactors added with Fe(II). OM27_clade and norank_f__Burkholderiaceae might be candidates for this process according to the correlation of genera and functional genes (based on the PICRUSt 2 functional prediction). Overall, this research is expected to provide new ideas to the effects of Fe(II)/Fe(III) on anammox and to the practical application of coupled system based on anammox in wastewater treatment.

Performance enhancement and optimization of the anammox process with the addition of iron

This study was conducted to evaluate the performance of anammox reaction on the addition of iron. Iron was added in the form of FeSO₄ starting with 2 mg/L (phase I), 5 mg/L (phase II), 8 mg/L (phase III), 10 mg/L (phase IV), 30 mg/L (phase V) and 50 mg/L (phase VI) on the addition of Fe (II) in anammox reactor. The efficiency of ammonia removal increased up to 90% with 5 mg/L of Fe (II) addition as compared to 77% when no Fe (II) was added. As the iron dosing was increased from 10 to 30 mg/L, ammonia removal declined sharply, which recovered slowly at steady-state condition. However, on the addition of 30 and 50 mg/L of Fe (II), the efficiency declined to 55% and 44%, respectively and did not recover. At 5 mg/L Fe (II) the nitrite removal was nearly 80% which declined to 44% at 50 mg/L. This was attributed to low pH values which hindered anammox activity. The mass balance study of nitrogen in the anammox process revealed that gas production was highest at 5 mg/L of Fe (II) conforming that 5 mg/L of Fe (II) is the optimum dose of iron for enhancing anammox reaction.

Strengthened attachment of anammox bacteria on iron-based modified carrier and its effects on anammox performance in integrated floating-film activated sludge (IFFAS) process

Moving-bed biofilm reactor (MBBR) or integrated floating-film activated sludge (IFFAS) process has been proved to be one of the ideal candidates for anammox application. However, the slow development of anammox bacteria (AnAOB) biofilm and unstable bioactivity always limit their wide application. This study developed a type of novel zero-valent iron (ZVI)-based modified carrier for strengthening AnAOB attachment and enhancing anammox performance. Surface properties analysis indicated the iron-based modified carrier revealed electropositive, less hydrophobic, and higher surface free energy compared with conventional high density polyethylene (HDPE) carrier. These surface parameters were positively correlated with total biomass attachment, anammox biofilm development, EPS secretion and heme-c production. IFFAS process filled with iron-based modified carriers could keep relatively stable and high anammox activity at different influent TN loadings (varied from 0.6 to 1.4 kg/(m³∙d)) and showed potential to keep and recover AnAOB bioactivity after six-months-freeze. Microbial analysis confirmed that anammox genus, Candidatus Kuenenia, had a significant niche preference on iron-based modified carrier than conventional HDPE carrier. As a result, the population of Candidatus Kuenenia in IFFAS process filled with modified carriers that contained 2 wt% or 3 wt% ZVI was 1.34 × 10⁶-1.55 × 10⁶ copies/ mg DNA, increased by 20.7-39.6% comparing with that in the control reactor (1.11 × 10⁶ copies/ mg DNA). This study demonstrated AnAOB could be enriched and maintained in situ with high abundance and bioactivity on the iron-based modified carriers, which would be significant for anammox process wide application in full-scale.

Nano zero-valent iron improves anammox activity by promoting the activity of quorum sensing system

The addition of nano zero-valent iron (nZVI) has been proven to improve the efficiency of the anammox process, however, the mechnism is not clear. Here, the effect of nZVI on anammox microbial community was studied by metagenomic sequencing methods. It was found that 50 mg/L nZVI indeed promoted the removal of NH₄⁺ and NO₂^- of the anammox reactor and significantly improved the relative abundance of AnAOB (Ca. Brocadia) from 42.1% to 52.5%. What's more, 50 mg/L nZVI increased the abundance of c-di-GMP synthesized protein from 148 rpmr to 252 rpmr in the microbial community and decreased the abundance of c-di-GMP degradation protein from 238 rpmr to 204 rpmr, which indirectly led to the enrichment of c-di-GMP in the microbial community. The enrichment of c-di-GMP reduced the motility of microorganisms in the reactor and promoted the secretion of extracellular polymers by bacteria, which is beneficial to the formation of sludge particles in the anammox reactor. In conclusion, this research clarified the mechanism of nZVI promoting the anammox process and provided theoretical guidance for the engineering application of anammox.

Natural and artificial humic substances to manage minerals, ions, water, and soil microorganisms

The chemistry of humic substances (HSs) occurs hidden from our sight, but is of key importance to agriculture and the environment, and nowadays even to medicine and technology. HSs are nowadays not only natural, but extracted and engineered, and in the past 20 years such products have been widely used in soil improvement and environment governance. In this review, we collate and summarize the applications and working principles of such HSs in agriculture and environmental ecology, mainly to elaborate the multiple roles of this functional polymer along with physical chemical quantification. Then several of the latest synthesis technologies, including hydrothermal humification technology (HTH), hydrothermal carbonization technology (HTC) and hydrogen peroxide oxidation technology (HOT) are presented, which were introduced to prepare artificial humic substances (A-HSs). The availability of reproducible and tunable synthetic A-HSs is a new chemical tool, and effects such as solubilization of insoluble phosphorus minerals, recovery of phosphorus, improvement of soil fertility for crop growth and reduction of toxicity of typical pollutants, can now be analyzed in detail and quantified. As a result, we can provide an effective chemical technology for utilizing biomass side products ("biowaste") to generate A-HSs of different types, thus realizing improvement in agricultural production and control of environmental pollution by the macro-synthesis of A-HSs-.

Effect of Fe3+ on the sludge properties and microbial community structure in a lab-scale A2O process

During biological wastewater treatment, ferric salt (Fe³⁺) usually serves as an inorganic flocculant to improve the agglomeration and sedimentation of suspended solids, and thus the removal efficiency of pollutants to meet the increasing strictly regulated wastewater discharge standards. In this study, we investigated the effects of Fe³⁺ on the removal efficiencies of pollutants, sludge properties, dominant flora and metabolic pathways of bacterial community in a classical anaerobic-anoxic-oxic (A²O) process. The results showed that a Fe³⁺ concentration lower than 10 mg·L^-1 could improve the removal efficiencies of chemical oxygen demand (COD) and total nitrogen (TN), while an inhibition effect was exerted at concentration higher than 10 mg·L^-1. The maximum removal efficiencies of COD and TN were 97% and 89%, respectively, under the critical Fe³⁺ concentration of 10 mg·L^-1. Total phosphorous (TP) removal was constantly positively correlated with Fe³⁺ concentration, due to the enhanced adsorption of phosphorus on activated sludge with the increase of surface roughness. Thauera displayed the highest relative abundance, and certain bacteria in Proteobacteria, Dehloromonas and Candidatus-Competibacter exhibited good adaptability to high concentration of Fe³⁺. In the context of metabolic collaterals, the most abundant functional gene families were identified to be Carbohydrate Metabolism, Amino Acid Metabolism, Cell Motility, Membrane Transport, and Replication and Repair. This study provides an extensive mechanistic insight into the impact of Fe³⁺ on the A²O process, which is of fundamental significance to exploit the contributions of inorganic salts to biological wastewater treatment.

Fatigue of anammox consortia under long-term 1,4-dioxane exposure and recovery potential: N-kinetics and microbial dynamics

Long-term exposure of anammox process to 1,4-dioxane was investigated using periodic anammox baffled reactor (PABR) under different 1,4-dioxane concentrations. The results generally indicated that PABR (composed of 4 compartments) has robust resistance to 10 mg-dioxane/L. The 1^st compartment acted as a shield to protect subsequent compartments from 1,4-dioxane toxicity through secretion of high extracellular polymeric substance (EPS) of 152.9 mg/gVSS at 10 mg-dioxane/L. However, increasing 1,4-dioxane to 50 mg/L significantly inhibited anammox bacteria; e.g., ~ 93% of total nitrogen removal was lost within 14 days. The inhibition of anammox process at this dosage was most likely due to bacterial cell lysis, resulting in the decrease of EPS secretion and specific anammox activity (SAA) to 105.9 mg/gVSS and 0.04 mg N/gVSS/h, respectively, in the 1^st compartment. However, anammox bacteria were successfully self-recovered within 41 days after the cease of 1,4-dioxane exposure. The identification of microbial compositions further emphasized the negative impacts of 1,4-dioxane on abundance of C. Brocadia among samples. Furthermore, the development of genus Planococcus in the 1^st compartment, where removal of 1,4-dioxane was consistently observed, highlights its potential role as anoxic 1,4-dioxane degrader. Overall, long-term exposure to 1,4-dioxane should be controlled not exceeding 10 mg/L for a successful application.

Denitrification using permeable reactive barriers with organic substrate or zero-valent iron fillers: controlling mechanisms, challenges, and future perspectives

Nitrate as a diffusive agricultural contaminant has been causing substantial groundwater quality deterioration worldwide. In situ groundwater remediation techniques using permeable reactive barriers (PRBs) have attracted increasing interest. Particularly, PRBs based on biological denitrification, using the organic substrate as a biostimulator, and chemical nitrate reduction, using zero-valent iron (ZVI) as a reductant, are two major PRB approaches for groundwater denitrification. This review paper analyzed the published studies over the past 10 years (2010-2020) using laboratory, modeling, and field-scale approaches to explore the performance and mechanisms of these two types of PRBs. Important factors affecting the denitrification efficiencies as well as the influential mechanisms were discussed. Several research gaps have been identified and further research needs are discussed in the end.

The application status, development and future trend of nano-iron materials in anaerobic digestion system

Growing environment problem and emphasis of environmental protection motivate intense research efforts in exploring technology to improve treatment efficiency on refractory organic pollutants. Hence, finding a method to make up for the deficiency of anaerobic digestion (AD) is very attractive and challenging tasks. The recent spark in the interest for the usage of some nanomaterials as an additive to strengthen AD system. The adoption of iron compounds can influence the performance and stability in AD system. However, different iron species and compounds can influence AD system in significantly different ways, both positive and negative. Therefore, strengthening mechanism, treatment efficiency, microbial community changes in Nanoscale Zero Valent Iron (nZVI) and Fe₃O₄ nanoparticles (Fe₃O₄ NPs) added AD systems were summarized by this review. The strengthening effects of nZVI and Fe₃O₄ NPs in different pollutants treatment system were analyzed. Previous study on the effects of nZVI and Fe₃O₄ NPs addition on AD have reported the concentration of nZVI and Fe₃O₄ NPs, and the types and biodegradability of pollutants might be the key factors that determine the direction and extent of effect in AD system. This review provides a summary on the nZVI and Fe₃O₄ NPs added AD system to establish experiment systems and conduct follow-up experiments in future study.

Unraveling the capability of graphene nanosheets and γ-Fe2O3 nanoparticles to stimulate anammox granular sludge

In this study, we investigated the potentials of nanomaterials to enhance anaerobic ammonium oxidation (anammox) process, in terms of nitrogen removal, microbial enrichment, and activity of key enzymes. Graphene nanosheets (GNs) and γ-Fe₂O₃ nanoparticles (NPs) were selected due to their catalytic functions as conductive material and electron shuttles, respectively. The obtained results revealed that the optimum dosage of GNs (10 mg/L) boosted the nitrogen removal rate (NRR) by 46 ± 3.1% compared to the control, with maximum NH₄⁺-N and NO₂^--N removal of 86.5 ± 2.7% and 97.1 ± 0.5%, respectively. Moreover, hydrazine dehydrogenase (HDH) enzyme activity was augmented by 1.1-fold when using 10 mg/L GNs. The presence of GNs promoted the anammox granulation via enhancement of hydrophobic interaction of extracellular polymeric substances (EPS). Regarding the use of γ-Fe₂O₃ NPs, 100 mg/L dose increased NRR by 55 ± 3.8%; however, no contribution to HDH enzyme activity and a decrease in EPS compositions were observed. Given that the abiotic use of γ-Fe₂O₃ NPs further resulted in high adsorption efficiency (~92%), we conclude that the observed promotion due to γ-Fe₂O₃ NPs was mainly abiotic. Moreover, the 16S rRNA analysis revealed that the relative abundance of genus C. Jettenia (anammox related bacteria) increased from 11.9% to 12.3% when using 10 mg/L GNs, while declined to 8.3% at 100 mg/L γ-Fe₂O₃ NPs. Eventually, nanomaterials could stimulate the efficiency of anammox process, and this promotion and associated mechanism depend on their dose and composition.

Operational impacts of heavy metals on activated sludge systems: the need for improved monitoring

Biological nutrient removal is highly reliant on maintaining a heterogeneous, balanced, and metabolically active microbial community that can adapt to the fluctuating composition of influent wastewater and encompassing environmental conditions. Maintaining this balance can be challenging in municipal wastewater systems that sporadically receive wastewater from industrial facilities due to the impact of heavy metals and other contaminants on the microbial ecology of the activated sludge. A thorough understanding of the impacts of heavy metals on activated sludge and of practical monitoring options is needed to support decision-making at the wastewater utility level. This paper is divided into two parts. In the first part, the review explains what happens when heavy metals interact with activated sludge systems by highlighting biosorption and bioaccumulation processes, and when an activated sludge system switches from bioaccumulation to toxic shock. Here, it also summarizes the impacts of heavy metal exposure on plant performance. In the second part, the review summarizes practical approaches that can be used at the plant outside the realm of traditional toxicological bioassays testing to determine the possible impacts of influent heavy metal concentrations on the BNR process. These approaches include the following: monitoring operational parameters for major shifts; respirometry; microscopy; ATP; chemical analyses of heavy metals with a focus on synergistic impacts and inhibitory limits; and other novel approaches, such as EPS chemical analyses, molecular techniques, and quorum sensing.

Granule-based immobilization and activity enhancement of anammox biomass via PVA/CS and PVA/CS/Fe gel beads

Granule-based immobilization of anammox biomass assisted by polyvinyl alcohol/chitosan (PVA/CS) and PVA/CS/Fe gel beads was studied, via the operation of three identical up-flow reactors (R1 without gel beads, R2 with PVA/CS, R3 with PVA/CS/Fe) for 203 days. In the end, the nitrogen removal rates (NRR) were 5.3 ± 0.4, 10.0 ± 0.3 and 13.9 ± 0.5 kg-N m^-3 d^-1 for R1, R2 and R3, respectively. The porous PVA/CS and PVA/CS/Fe created a suitable eco-niche for anammox bacteria to grow and attach, thus being retained in the reactor. The EPS entangles newly grown cells within the gel beads, resulting in compact aggregation. The interaction between Fe ions added to PVA/CS/Fe gel beads and negatively charged EPS groups strongly promoted granule strength and compactness. The immobilization method proposed by this study was found to effectively improve biomass retention in the reactors, which is promising for advanced anammox process applications.

High-dispersion zero-valent iron particles stabilized by artificial humic acid for lead ion removal

Nano zero-valent iron (nZVI), as a high-efficiency adsorbent for heavy metals, often suffers being oxidized and assembling together due to small size and super reactivity, further decreasing its adsorption performance and limiting application ranges. Herein, we have designed a novel adsorbent with high-dispersion nZVI stabilized by as-prepared artificial humic acid (AHA-nZVI) derived from hydrothermal humification (HTH) technology. Introduction of artificial humic acid (A-HA) can effectively reduce the oxidation and agglomeration of nZVI, leading to superior kinetic removal efficiency of Pb²⁺ (> 99.2%) and huge Langmuir removal capacity of 649.0 mg/g. The combination of nZVI and A-HA (contained abundant functional groups, i.e. -OH and -COOH) via C-O-Fe bonding makes nZVI have good dispersion and oxidation resistance. Multiple interaction mechanisms including reduction reaction, complexation and co-precipitation between heavy metals and AHA-nZVI samples are realized. Overall, AHA-nZVI is a promising material for high-performance heavy metal contaminated water treatment.

Substantially enhanced anaerobic reduction of nitrobenzene by biochar stabilized sulfide-modified nanoscale zero-valent iron: Process and mechanisms

Nanoscale zero-valent iron (nZVI), although being increasingly used in anaerobic systems for strengthening the removal of various refractory pollutants, is limited by various inherent drawbacks, such as easy precipitation, passivation, poor mass and electron transfer. To address the above issues, biochar stabilized sulfide-modified nZVI (S-nZVI@BC) was added into an up-flow anaerobic sludge blanket (UASB) to investigate the enhancement of anaerobic biodegradation of nitrobenzene (NB) and its impacts on microbial community structure. The results demonstrated that both NB reduction and aniline formation could be substantially facilitated in S-nZVI@BC coupled system compared to other anaerobic ones coupled with nZVI or S-nZVI. The dosage of S-nZVI@BC resulted in the formation of densely packed aggregates, evidently increased the extracellular polymeric substances content, promoted the volatile fatty acids transformation and stimulated the methane yield. Furthermore, species related to fermentation (Bacteroides and Longilinea), methanogenesis (Methanosarcina and Methanomethylovorans), electroactivity (Pelobacter, Thiobacillus and Phaselicystis) as well as reduction (Desulfovibrio) were considerably enriched in S-nZVI@BC coupled system. The activities of electron transport, total adenosine triphosphate, nitroreductase and NAD(P)H, which were closely related to microbial activity and NB transformation, were increased noticeably in S-nZVI@BC coupled anaerobic system. This study demonstrated the promising potential for long-term operation and full-scale application of S-nZVI@BC coupled system for the treatment of NB containing wastewater.

Evaluating the response of anaerobic ammonium-oxidizing bacteria to heavy metal spill in freshwater sediment

Anaerobic ammonium-oxidizing (anammox) bacteria can play an important role in nitrogen elimination in the environment. However, the effect of heavy metals on anammox bacteria in aquatic ecosystem remains largely unknown. The present study investigated the variability of anammox bacterial community in a freshwater reservoir after a severe heavy metal spill. The richness (Chao1 richness estimator = 2-18), diversity (Shannon index = 0.26-2.04) and community structure of anammox bacteria changed considerably with sampling date, while anammox bacterial abundance (from 1.38 × 10⁵ to 3.09 × 10⁵ anammox bacterial 16S rRNA gene copies per gram dry sediment) was less responsive to metal spill. Anammox bacterial communities were mainly composed of Brocadia- and Anammoxoglobus-like bacteria as well as novel phylotype, however, there relative abundance varied among sampling dates. This work could add the knowledge of the response of anammox bacteria to heavy metal contamination.

Long-term impacts of graphene oxide and Ag nanoparticles on anammox process: Performance, microbial community and toxic mechanism

The increasing application of engineered nanoparticles (NPs) has posed an emerging challenge to constructed wetland wastewater treatment. The performance, microbial community and toxic mechanism of anammox-based unplanted subsurface-flow constructed wetlands (USFCWs) were investigated under the long-term exposure of different graphene oxides (GOs) and Ag NP concentrations. Results showed that the addition of GO could promote TN removal, manifesting as function anammox bacteria C. Anammoxoglobus having a relative high abundance, for GO did not cause significant damage to the cell integrity though there was an increase in ROS concentrations. TN removal would not be obviously affected under exposure of 1 mg/L Ag NPs, for the function gene related to cell biogenesis and repair was up-regulated; while the addition of 10 mg/L Ag NPs would have an inhibiting effect on TN removal in the USFCWs, for the disappearance of some species having anammox ability. Key enzymes of anammox process (NIR and HDH) decreased to some extent under GO and Ag NP exposure, and function gene of defense mechanisms had an increase trend in samples.

Overcoming challenges in mainstream Anammox applications: Utilization of nanoscale zero valent iron (nZVI)

Although Anammox process is a proven technology for sidestream nitrogen removal, the process faces challenges for mainstream applications in sewage treatment plants (STPs). The aim of this study was to investigate the effect of zero valent iron nanoparticles (nZVI) on process performance to eliminate confronts for mainstream applications. An SBR (sequencing batch reactor) system was fed with various nZVI concentrations (0.04-5000 ppb) within 310 days of operation. Ammonium (NH₄⁺-N) and nitrite (NO₂^--N) removal rates showed 58% increase in daily measurements and 73% increase in instant measurements. Specific Anammox Activity (SAA) was noticeably higher on the days the system was exposed to nZVI compared to the unexposed days. EPS secretion, which enhances granulation of Anammox bacteria was favored by nZVI. Despite lower sludge retention time (SRT) values, the fraction of Anammox bacteria in total bacteria reached to 91-92% implying a boosting effect of nZVI on growth rate of Anammox bacteria. High Resolution Melting (HRM) analyses showed that four distinct clades were present in the reactor.

Successful start-up of the anammox process in constructed wetland microcosms: influence of the electron acceptors on performance, microbial community, and functional genes

Nitrogen removal by anammox process has been recognized as efficient, cost-effective, and low-energy alternative removal. The longer start-up periods of anammox process hindered the widespread application of anammox-based technology. In this study, four identical unplanted subsurface-flow constructed wetlands (USFCWs) were built up to investigate the effects of electron acceptors (Fe³⁺, Mn⁴⁺, SO₄^2-) on the start-up of anammox process. Results indicated that the start-up time of anammox process was shortened to 105 days in R1 (with Fe³⁺ addition) and 110 days in R2 (with Mn⁴⁺ addition) with nitrogen removal efficiencies of above 75%, compared with 148 days in R0 (control). The addition of SO₄^2- had no significant effect on start-up process. High-throughput sequencing results demonstrated that Shannon index increased significantly from 2.87 (R0) to 5.08 (R1) and 5.00 (R2), and the relative abundance of Candidatus Anammoxoglobus rose from 3.6 to 5.3% in R1. Denitratisoma increased significantly in R2 under addition of Mn⁴⁺, which was beneficial for the occurrence of anammox process. The functional genes that related to signal transduction mechanisms and secondary metabolite biosynthesis, transport, and catabolism were upregulated after addition of electron acceptors. These results demonstrated that adding electron acceptors Fe³⁺ or Mn⁴⁺ could be an effective way to accelerate the start-up of anammox process. Graphical abstract ᅟ.

The revolution of performance, sludge characteristics and microbial community of anammox biogranules under long-term NiO NPs exposure

Given the increasing applications of NiO nanoparticles (NPs) in battery products, the potential effects of NiO NPs on anaerobic ammonium oxidation (anammox) systems were studied for the first time. The results showed that the anammox system performance obviously differed under the stresses of different NiO NPs concentrations. After the withdrawal of NiO NPs, the nitrogen removal performance of the anammox reactor returned to nearly that of the initial phase within 35 days. Compared with 0 mg L^-1 NiO NPs, the specific anammox activity first increased and then decreased to the minimum value of 116.8 ± 13.8 mg TN g^-1 VSS d^-1 at 60 mg L^-1 NiO NPs. The variations in the heme c contents and extracellular polymeric substance amounts were similar to the variations in the specific anammox activity throughout the whole experiment. Additionally, the relative abundance of the dominant bacteria (Candidatus kuenenia) increased from 20.44% at 60 mg L^-1 NiO NPs to 23.14% at the end of the last phase. Thus, the potential effects of NiO NPs on anammox systems should be a cause for great concern.

Fabrication and characterization of hydrophilic corn stalk biochar-supported nanoscale zero-valent iron composites for efficient metal removal

Pyrolyzing low-cost agro-waste into biochar is a promising means for waste biomass utilization. This study engineers corn stalk-derived biochar with abundant hydrophilic functional groups as a support material for iron nanoparticles impregnation (nZVI-HCS). Surface chemistry and morphology of nZVI-HCS composites is characterized by SEM, TEM, TG, XRD, FTIR, XPS, and BET techniques, which helps to elucidate the mechanisms of Pb²⁺, Cu²⁺ and Zn²⁺ removal from single and mixed-metal solutions in batch experiments. Equilibrium adsorption capacities can reach 195.1, 161.9 and 109.7 mg·g^-1 for Pb²⁺, Cu²⁺ and Zn²⁺ at neutral medium after 6-h process, respectively. The engineered biochar with hierarchical pores can impregnate iron nanoparticles, serve as an adsorbent, and enhance metal reduction/precipitation. Rapid removal and high performance can be maintained after five regeneration/reuse cycles. Multiple interaction mechanisms including adsorption, precipitation, reduction and complexation are responsible for metal removal by nZVI-HCS composites, which can be a novel biowaste-derived material for wastewater treatment.

Insight into the impact of Fe3O4 nanoparticles on anammox process of subsurface-flow constructed wetlands under long-term exposure

The increasing use of Fe₃O₄ nanoparticles (NPs) had posed an emerging challenge to wastewater treatment processes, and their potential impact on anaerobic ammonium oxidation (anammox) process of unplanted subsurface-flow constructed wetlands (USFCWs) was investigated firstly under the long-term exposure of different Fe₃O₄ NP concentrations. It was found that Fe₃O₄ NP exposure could improve total nitrogen (TN) removal. The abundance of Candidatus Anammoxoglobus increased significantly at 10 mg/L Fe₃O₄ NPs, while decreased under 1 mg/L Fe₃O₄ NP exposure. Desulfosporosinus and Exiguobacterium increased to some extent at 1 mg/L Fe₃O₄ NPs, suggesting that Fe-anammox played an important role in TN removal. The ROS production increased with the increase of Fe₃O₄ NP concentration, and the integrity of cell membrane was good under Fe₃O₄ NP exposure. The functional genes that related to inorganic ion transport and metabolism and lipid transport and metabolism were upregulated, and cell motility decreased after long-term exposure of 1 mg/L Fe₃O₄ NPs. Graphical abstract ᅟ.

Role and application of iron in water treatment for nitrogen removal: A review

It is crucial to have a review on the role of iron in water treatment for the guidance towards the selection of appropriate processes, content of iron, and application conditions, as there are few reviews available at present and the systematic information is lacking for both researchers and engineers. The objectives of this review are to summarize the state of arts with respect to iron applied in nitrogen removal, discuss chemical and biological or bio-chemical combined nitrogen removal pathways and processes coupled with iron, and to reveal reaction mechanisms as well as providing references or even solutions to pertinent the practical engineering application of nitrate removal coupling with iron. The following information have been summarized and discussed in details: (1) iron based materials with varieties of preparations and forms, (2) major coupling ways of nitrogen removal methods or processes with iron application, (3) chemical reaction equations about a variety of chemical and biological or bio-chemical combined processes and the main mechanisms. In addition, challenges and/or drawbacks during the nitrogen removal processes will also be discussed in this paper, which is aimed to seek better practical engineering applications of nitrate removal coupling with iron.

Short-term effects of nanoscale Zero-Valent Iron (nZVI) and hydraulic shock during high-rate anammox wastewater treatment

The stability and resilience of an anaerobic ammonium oxidation (anammox) system under transient nanoscale Zero-Valent Iron (nZVI) (50, 75 and 100 mg L^-1), hydraulic shock (2-fold increase in flow rate) and their combination were studied in an up-flow anaerobic sludge blanket reactor. The response to the shock loads can be divided into three phases i.e. shock, inertial and recovery periods. The effects of the shock loads were directly proportional to the shock intensity. The effluent quality was gradually deteriorated after exposure to high nZVI level (100 mg L^-1) for 2 h. The higher effluent sensitivity index and response caused by unit intensity of shock was observed under hydraulic and combined shocks. Notably, the specific anammox activity and the content of heme c were considerably reduced during the shock phase and the maximum loss rates were about 30.5% and 24.8%, respectively. Nevertheless, the extracellular polymeric substance amount in the shock phase was enhanced in varying degrees and variation tendency was disparate at all the tested shock loads. These results suggested that robustness of the anammox system was dependent on the magnitude shocks applied and the reactor resistance can be improved by reducing hydraulic retention time with the increase of nZVI concentration under these circumstances.

Enhanced effects of maghemite nanoparticles on the flocculent sludge wasted from a high-rate anammox reactor: Performance, microbial community and sludge characteristics

Magnetic nanoparticles (NPs) have been widely applied in environmental remediation, biomass immobilization and wastewater treatment, but their potential impact on anaerobic ammonium oxidation (anammox) biomass remains unknown. In this study, the short-term and long-term impacts of maghemite NPs (MHNPs) on the flocculent sludge wasted from a high-rate anammox reactor were investigated. Batch assays showed that the presence of MHNPs up to 200 mg L^-1 did not affect anammox activity, reactive oxygen species production, or cell membrane integrity. Moreover, long-term addition of 1-200 mg L^-1 MHNPs had no adverse effects on reactor performance. Notably, the specific anammox activity, the abundance of hydrazine synthase structural genes and the content of extracellular polymeric substance were increased with elevated MHNP concentrations. Meanwhile, the community structure was shifted to higher abundance of Candidatus Kuenenia indicated by high-throughput sequencing. Therefore, MHNPs could be applied to enhance anammox flocculent sludge due to their favorable biocompatibility.