Improvement in modular scalability of polymeric thin-film photobioreactor for autotrophic culturing of Haematococcus pluvialis using industrial flue gas

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO2)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO2), cement production (8-15% CO2), coke production (18-23% CO2), and ore smelting (6-7% CO2). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NOX) and sulfur dioxide (SO2)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

Advancement of Carotenogenesis of Astaxanthin from Haematococcus pluvialis: Recent Insight and Way Forward

The demand for astaxanthin has been increasing for many health applications ranging from pharmaceuticals, food, cosmetics, and aquaculture due to its bioactive properties. Haematococcus pluvialis is widely recognized as the microalgae species with the highest natural accumulation of astaxanthin, which has made it a valuable source for industrial production. Astaxanthin produced by other sources such as chemical synthesis or fermentation are often produced in the cis configuration, which has been shown to have lower bioactivity. Additionally, some sources of astaxanthin, such as shrimp, may denature or degrade when exposed to high temperatures, which can result in a loss of bioactivity. Producing natural astaxanthin through the cultivation of H. pluvialis is presently a demanding and time-consuming task, which incurs high expenses and restricts the cost-effective industrial production of this valuable substance. The production of astaxanthin occurs through two distinct pathways, namely the cytosolic mevalonate pathway and the chloroplast methylerythritol phosphate (MEP) pathway. The latest advancements in enhancing product quality and extracting techniques at a reasonable cost are emphasized in this review. The comparative of specific extraction processes of H. pluvialis biological astaxanthin production that may be applied to large-scale industries were assessed. The article covers a contemporary approach to optimizing microalgae culture for increased astaxanthin content, as well as obtaining preliminary data on the sustainability of astaxanthin production and astaxanthin marketing information.

Cultivation of Chlorella sp. HS2 using wastewater from soy sauce factory

Incorporation of wastewater from industrial sectors into the design of microalgal biorefineries has significant potential for advancing the practical application of this emerging industry. This study tested various food industrial wastewaters to assess their suitability for microalgal cultivation. Among these wastewaters, defective soy sauce (DSS) and soy sauce wastewater (SWW) were chosen but DSS exhibited the highest nutrient content with 13,500 ppm total nitrogen and 3051 ppm total phosphorus. After diluting DSS by a factor of 50, small-scale cultivation of microalgae was conducted to optimize culture conditions. SWW exhibited optimal growth at 25-30 °C and 300-500 μE m-2 s-1, while DSS showed optimal growth at 30-35 °C. Based on a 100-mL lab-scale and 3-L outdoor cultivation with an extended cultivation period, DSS outperformed SWW, exhibiting higher final biomass productivity. Additionally, nutrient-concentrated nature of DSS is advantageous for transportation at an industrial scale, leading us to select it as the most promising feedstock for microalgal cultivation. With further optimization, DSS has the potential to serve as an effective microalgal cultivation feedstock for large-scale biomass production.

Development of a limitless scale-up photobioreactor for highly efficient photosynthesis-based polyhydroxybutyrate (PHB)-producing cyanobacteria

Photosynthetic polyhydroxybutyrate (PHB) production is an attractive technology for realizing a sustainable society by simultaneously producing useful biodegradable plastics and mitigating CO2. It is necessary to establish an economical large-scale photobioreactor (PBR) capable of effectively cultivating photosynthetic microorganisms such as cyanobacteria. A roll-to-roll winding machine/heat-sealer hybrid system for fabricating an easy-to-scale-up PBR was developed in the present study. The baffle design was optimized to facilitate mass transfer within the PBR, and the operating conditions of the gas sparger were investigated to maximize the CO2 transfer efficiency. The newly developed PBR was able to produce biomass of PHB content 10.7 w/w% at a rate of 6.861 g m-2 d-1, 21 % improved biomass productivity compared with the existing PBR. It was confirmed that biomass productivity was maintained even when PBR was scaled up to 2 tons. Consequently, the newly developed PBR is expected to improve the feasibility of photosynthetic PHB production.

Bioprocess Strategy of Haematococcus lacustris for Biomass and Astaxanthin Production Keys to Commercialization: Perspective and Future Direction

Haematococcus lacustris (formerly called Haematococcus pluvialis) is regarded as the most promising microalgae for the production of natural astaxanthin, which is secondary metabolism used as a dietary supplement, also for cosmetic applications, due to its high anti-oxidant activity. Astaxanthin has a wide range of biological activities and high economic potential, and currently dominates the market in its synthetic form. Furthermore, because of the difficulty of bioprocess and the high cost of cultivation, astaxanthin extracted from this microalga is still expensive due to its low biomass and pigment productivities. Large-scale biomass production in biotechnological production necessitates the processing of a large number of cultures as well as the use of both indoor and outdoor systems, such as open pond raceway systems and photo-bioreactors (PBR). The photo-bioreactors systems are suitable for mass production because growth conditions can be controlled, and the risk of contamination can be reduced to a certain extent and under specific culture parameters. This review discusses current technologies being developed to improve cultivation and operation efficiency and profitability, as well as the effect of parameter factors associated with H. lacustris cultivation on biomass and astaxanthin bioproduction, and even strategies for increasing bioproduction and market potential for H. lacustris astaxanthin.

Multifaceted strategies for economic production of microalgae Haematococcus pluvialis-derived astaxanthin via direct conversion of CO2

Owing to its strong antioxidant properties, astaxanthin has a high market price in the nutraceutical and pharmaceutical fields, and its demand is increasing. Furthermore, with an increase in the demand for green technology, astaxanthin production through direct CO₂ conversion using the autotrophic green microalga Haematococcus pluvialis as a bio-platform has received much attention. Large-scale outdoor cultivation of H. pluvialis using waste CO₂ sources and sunlight can secure sustainability and improve economic efficiency. However, low strain performance, reduced light utilization because of increased cell density, and inefficient transfer of gaseous CO₂ into liquid culture broth hinder its large-scale commercialization of astaxanthin. Herein, we presented a multifaceted strategy, including the development of high-efficiency strains, a culture system for astaxanthin accumulation, and astaxanthin extraction from biomass, for economically producing astaxanthin from H. pluvialis through direct CO₂ conversion. Future perspectives were presented by comparing and analyzing various previous studies conducted using the latest technology.

Effective contamination control strategies facilitating axenic cultivation of Haematococcus pluvialis: Risks and challenges

With industrialization, anthropogenic mishandlings have resulted in the discharge of abundant amount of CO₂ into the atmosphere. This has triggered an unnatural warming that has dramatically increased the Earth's temperature in a short duration. This problem can be addressed by the biological conversion of CO₂; several studies have been conducted using H. pluvialis culture that produces high value-added materials, such as astaxanthin and omega-3 fatty acids. However, although H. pluvialis has a high market value, the market size is quite small. Because H. pluvialis cells are susceptible to contamination due to its slow growth rate, hence large-scale culture of H. pluvialis without reliable contamination control strategies poses significant risks. This review comprehensively discusses the contamination that occurs during the culturing of H. pluvialis in various culture systems under different culture conditions. The review also discusses the strategies in controlling the biotic contaminants, such as bacteria and fungi.

Robust cyst germination induction in Haematococcus pluvialis to enhance astaxanthin productivity in a semi-continuous outdoor culture system using power plant flue gas

The microalgae Haematococcus pluvialis biologically converts CO₂ into natural astaxanthin that possesses a strong antioxidant activity; its low carbon footprint and economic viability have allowed it to garner great attention. However, low efficiency of the cultivation process is a major hurdle in its commercial production. Here, additional nitrogen was provided to fully grown cells to induce efficient cyst germination, thereby rapidly increasing the number of cells containing astaxanthin. After germination, these cells were rapidly converted from zooids to cysts by nitrogen depletion, while maintaining a steady astaxanthin content of 5.5%. Consequently, a 2.1-fold increase in astaxanthin productivity in comparison with that in a batch culture was achieved. Moreover, the germination-based semi-continuous process yielded 2.6 times higher astaxanthin productivity in a large-scale culture using power plant flue gas and a polymeric photobioreactor. This study provides a promising cultivation strategy for the commercial mass production of natural astaxanthin.

A green decontamination technology through selective biomineralization of algicidal microorganisms for enhanced astaxanthin production from Haematococcus pluvialis at commercial scale

Currently, there is a lack of an efficient, environmentally-benign and sustainable industrial decontamination strategy to steadily achieve improved astaxanthin production from Haematococcus pluvialis under large-scale outdoor conditions. Here, this study demonstrates for the first time that a CaCO₃ biomineralization-based decontamination strategy (CBDS) is highly efficient in selectively eliminating algicidal microorganisms, such as bacteria and fungi, during large-scale H. pluvialis cultivation under autotrophic and mixotrophic conditions, thereby augmenting the astaxanthin productivity. Under outdoor AT and MT conditions, the average astaxanthin productivity of H. pluvialis using CBDS in a closed photobioreactor system was substantially increased by 14.85- (1.19 mg L^-1 d^-1) and 13.65-fold (2.43 mg L^-1 d^-1), respectively, compared to the contaminated H. pluvialis cultures. Given the exponentially increasing demand of astaxanthin, a natural anti-viral, anti-inflammatory, and antioxidant drug, CBDS will be a technology of interest in H. pluvialis-based commercial astaxanthin production which has been hindered by the serious biological contaminations.

Improved CO2-derived polyhydroxybutyrate (PHB) production by engineering fast-growing cyanobacterium Synechococcus elongatus UTEX 2973 for potential utilization of flue gas

Industrial application of cyanobacterial poly-β-hydroxybutyrate (PHB) production from CO₂ is currently challenged by slow growth rate and low photoautotrophic PHB productivity of existing cyanobacteria species. Herein, a novel PHB-producing cyanobacterial strain was developed by harnessing fast-growing cyanobacteria Synechococcus elongatus UTEX 2973 with introduction of heterologous phaCAB genes. Under photoautotrophic condition, the engineered strain produced 420 mg L^-1 (16.7% of dry cell weight) with the highest specific productivity of 75.2 mg L^-1 d^-1. When compared with a native PHB producer Synechocystis PCC 6803 under nitrogen deprivation, the engineered strain exhibited 2.4-fold higher PHB productivity. The performance of the engineered strain was further demonstrated in large scale cultivation using photobioreactor and outdoor cultivation employing industrial flue gas as the sole carbon source. This study can provide a promising solution to address petroleum-based plastic waste and contribute to CO₂ mitigation.

Preparation, characterization and antioxidant activity of astaxanthin esters with different molecular structures

BACKGROUND

Astaxanthin (Asta) is widely used in the nutraceutical and food industry because of its strong antioxidant properties. However, natural Asta mainly exists in the esterified form with various fatty acid chains, making it difficult to understand the particular molecular structure of astaxanthin esters (Asta-Es) that have better antioxidant capacity. In this study, Asta-Es with different molecular structures was systematically prepared, and identified by using thin-layer chromatography (TLC), ultraviolet-visible (UV-visible), high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), and proton nuclear magnetic resonance (¹ H-NMR). In addition, their antioxidant properties were evaluated by 2,2'-diphenylpicrylhydrazyl (DPPH) and ABTS scavenging activity.

RESULTS

Fourteen Asta-Es with different molecular structures were systematically synthesized. This study used a simple and efficient method for the separation and purification of astaxanthin monoester (Asta-ME) and astaxanthin diester (Asta-DE) with high purity (86%-94%) by silica gel column chromatography. 13-cis-Asta-E and 9-cis-Asta-E were firstly identified from Asta-E. The DPPH clearance rates and ABTS scavenging rates of Asta-C4:0, Asta-C8:0, Asta-C12:0, and Asta-C18:0 were relatively close, but the DPPH and ABTS scavenging rates of Asta-C18:0, Asta-C18:1, Asta-C18:2, and Asta-C22:6 increased gradually. Among all Asta-Es, Asta-C22:6/C22:6 showed the highest antioxidant capacity, with the DPPH and ABTS scavenging rates of 77.22 ± 3.29% and 51.84 ± 1.65%, respectively.

CONCLUSION

In this study, it was concluded that chemically synthesized Asta-Es contained cis-astaxanthin ester and polyunsaturated fatty acid chain increased the antioxidant activity of Asta, showing less effect of the length of fatty acid chain. These results provide useful information for the production and use of highly efficient Asta-E as functional food and pharmaceutical ingredients. © 2020 Society of Chemical Industry.

Integrated valorization system for simultaneous high strength organic wastewater treatment and astaxanthin production from Haematococcus pluvialis

High-strength organic wastewater, e.g., potato juice wastewater, exerts high stress on the environment. This study proposes an integrated system for simultaneous high-strength organic wastewater treatment and nutrients upcycling for astaxanthin production by the combination of anaerobic processes and microalgae (Haematococcus pluvialis) cultivation. The potato juice wastewater was pretreated by either acidification or methanation. The effluents of both pretreatments achieved higher biomass yields of H. pluvialis compared to cultivation in standard culture media (control). The high acetate and potassium concentrations of the acidification effluents resulted in significantly higher astaxanthin production (24.5-27.9 mg g^-1, 3 days) compared to the control (14.7 mg g^-1, 12 days) in a shorter period. The integrated system contributed to a final removal efficiency of 51.3-75.8%, 86.5-98.3%, and 69.4-83.4% for COD, phosphorus, and ammonia, respectively. This study presents a promising two-stage process for simultaneous efficient methane and astaxanthin production, as well as remediation of high-strength organic wastewater.

Improvement of Photoautotrophic Algal Biomass Production after Interrupted CO2 Supply by Urea and KH2PO4 Injection

Microalgae-derived biomass is currently considered a sustainable feedstock for making biofuels, including biodiesel and direct combustion fuel. The photoautotrophic cultivation of microalgae using flue gas from power plants has been continuously investigated to improve the economic feasibility of microalgae processes. The utilization of waste CO2 from power plants is advantageous in reducing carbon footprints and the cost of carbon sources. Nonetheless, the sudden interruption of CO2 supply during microalgal cultivation leads to a severe reduction in biomass productivity. Herein, chemical fertilizers including urea and KH2PO4 were added to the culture medium when CO2 supply was halted. Urea (5 mM) and KH2PO4 (5 mM) were present in the culture medium in the form of CO2/NH4+ and K+/H2PO4−, respectively, preventing cell growth inhibition. The culture with urea and KH2PO4 supplementation exhibited 10.02-fold higher and 7.28-fold higher biomass and lipid productivity, respectively, compared to the culture with ambient CO2 supply due to the maintenance of a stable pH and dissolved inorganic carbon in the medium. In the mass cultivation of microalgae using flue gas from coal-fired power plants, urea and KH2PO4 were supplied while the flue gas supply was shut off. Consequently, the microalgae were grown successfully without cell death.

Influence of molecular structure of astaxanthin esters on their stability and bioavailability

The stability and bioavailability of fourteen astaxanthin esters (Asta-Es) with different molecular structures were investigated using in vitro and in vivo digestion models. The results demonstrated that Asta-E with long-chain and saturated fatty acids were more stable than other types of Asta-E. Astaxanthin diester (Asta-DE) was better than astaxanthin monoester (Asta-ME) and free astaxanthin (F-Asta), as determined based on the degradation rate constant at 60 °C. The absorbability of Asta-Es with different molecular structures was evaluated through the serum concentrations of astaxanthin (Asta). The results indicated that Asta-E with short-chain fatty acids had higher bioavailability than Asta-Es with long-chain fatty acids, whereas Asta-E with high-unsaturation fatty acids had higher bioavailability than Asta-E with low-unsaturation fatty acids. Asta-ME had significantly increased bioavailability compared with Asta-DE. We concluded that the molecular structure of Asta-E could significantly affect their stability and bioavailability.

Novel Insights into the Biotechnological Production of Haematococcus pluvialis-Derived Astaxanthin: Advances and Key Challenges to Allow Its Industrial Use as Novel Food Ingredient

Astaxanthin shows many biological activities. It has acquired a high economic potential and its current market is dominated by its synthetic form. However, due to the increase of the health and environmental concerns from consumers, natural forms are now preferred for human consumption. Haematococcus pluvialis is artificially cultured at an industrial scale to produce astaxanthin used as a dietary supplement. However, due to the high cost of its cultivation and its relatively low biomass and pigment productivities, the astaxanthin extracted from this microalga remains expensive and this has probably the consequence of slowing down its economic development in the lower added-value market such as food ingredient. In this review, we first aim to provide an overview of the chemical and biochemical properties of astaxanthin, as well as of its natural sources. We discuss its bioavailability, metabolism, and biological activities. We present a state-of-the-art of the biology and physiology of H. pluvialis, and highlight novel insights into the biotechnological processes which allow optimizing the biomass and astaxanthin productivities. We are trying to identify some lines of research that would improve the industrial sustainability and economic viability of this bio-production and to broaden the commercial potential of astaxanthin produced from H. pluvialis.

An Integrated Strategy for Nutraceuticals from Haematoccus pluvialis: From Cultivation to Extraction

The aim of this study was to develop an effective integrated cultivation system for Haematococcus pluvialis as a source of bioactive compounds such as astaxanthin, lutein, proteins, and fatty acids (FAs). The Chlorophyta H. pluvialis was cultivated in a vertical bubble column photobioreactor (VBC-PBR) under batch mode, allowing switching from green to red phase for astaxanthin induction. The combined effect of light intensity and nutrients on bioactive compound formation was investigated. Results showed that growth under lower nutrients availability and light intensity led to a higher concentration of biomass. Growth under high light intensity with an appropriate concentration of nitrate, sulfate, phosphate and magnesium led to ~85% and ~58% higher production of total carotenoids and fatty acids, respectively. Under high stress conditions, ~90% nitrate and phosphate consumption were observed.

Enhancement of biofuel production by microalgae using cement flue gas as substrate

The cement industry generates a substantial amount of gaseous pollutants that cannot be treated efficiently and economically using standard techniques. Microalgae, a promising bioremediation and biodegradation agent used as feedstock for biofuel production, can be used for the biotreatment of cement flue gas. In specific, components of cement flue gas such as carbon dioxide, nitrogen, and sulfur oxides are shown to serve as nutrients for microalgae. Microalgae also have the capacity to sequestrate heavy metals present in cement kiln dust, adding further benefits. This work provides an extensive overview of multiple approaches taken in the inclusion of microalgae biofuel production in the cement sector. In addition, factors influencing the production of microalgal biomass are also described in such an integrated plant. In addition, process limitations such as the adverse impact of flue gas on medium pH, exhaust gas toxicity, and efficient delivery of carbon dioxide to media are also discussed. Finally, the article concludes by proposing the future potential for incorporating the microalgae biofuel plant into the cement sector.

Morphological Change and Cell Disruption of Haematococcus pluvialis Cyst during High-Pressure Homogenization for Astaxanthin Recovery

Haematococcus pluvialis accumulates astaxanthin, which is a high-value antioxidant, during the red cyst stage of its lifecycle. The development of a rigid cell wall in the cysts hinders the recovery of astaxanthin. We investigated morphological changes and cell disruption of mature H. pluvialis cyst cells while using high-pressure homogenization for astaxanthin extraction. When treated with French-press-cell (pressure, 10,000–30,000 psi; passage, 1–3), the intact cyst cells were significantly broken or fully ruptured, releasing cytoplasmic components, thereby facilitating the separation of astaxanthin by ethyl acetate. Fluorescence microscopy observations using three different fluorescent dyes revealed that a greater degree of cell breakage caused greater external dispersion of astaxanthin, chlorophyll, lipids, proteins, and carbohydrates. The mechanical treatment resulted in a high cell disruption rate of up to 91% based on microscopic cell typing and Coulter methods. After the ethyl acetate extraction, the astaxanthin concentration significantly increased by 15.2 mg/L in proportion to the increase in cell disruption rate, which indicates that cell disruption is a critical factor for solvent-based astaxanthin recovery. Furthermore, this study recommends a synergistic combination of the fast instrumental particle-volume-distribution analysis and microscope-based morphologic phenotyping for the development of practical H. pluvialis biorefinery processes that co-produce various biological products, including lipids, proteins, carbohydrates, chlorophyll, and astaxanthin.

Sedimentation rate-based screening of oleaginous microalgae for utilization as a direct combustion fuel

The co-combustion of microalgae biomass with coal has the potential to significantly reduce CO₂ emissions by eliminating expensive and carbon-emitting downstream processes. In this study, the utilization of microalgal biomass as a direct combustion fuel in co-firing industries and the screening of potential oleaginous strains of high calorific value was investigated. High-lipid accumulating mutants were selected from mutant mixtures based on cell density using differential sedimentation rates. Of the mutant strains obtained in the top phase of the separation medium, 72% showed a higher lipid content than the wild-type strain. One mutant strain exhibited a 57.3% enhanced lipid content and a 9.3% lower heating value (LHV), both indicators of direct combustion fuel performance, compared to the wild-type strain. Our findings indicate that sedimentation rate-based strain selection allows for the easy and rapid screening of high-lipid content algal strains for the use of microalgae as direct combustion fuels.

Biological removal of nitrogen oxides by microalgae, a promising strategy from nitrogen oxides to protein production

Nitrogen oxides (NO_x) are the components of fossil flue gases that give rise to serious environmental and health hazards. Among the available techniques for NO_x removal, microalgae-based biological removal of NO_x (BioDeNO_x) is a promising and competent technology with eco-friendly path of low energy and low-cost solution for the pollution. In this review article, current biological technologies including bacteria-based and microalgae-related BioDeNO_x are discussed. Comparing to direct BioDeNO_x approach, indirect BioDeNO_x by microalgae is more promising since it is more stable, reliable and efficient. By transforming inorganic nitrogen nutrients to organic nitrogen, microalgae can potentially play an important role in converting NO_x into high-value added products. The microalgae-based BioDeNO_x process displays an attractive prospect for flue gas treatment to reduce environmental NO_x pollution and potentially supply protein products, establishing an efficient circular-economy strategy.

Computational fluid dynamics simulation in scaling-up of airlift photobioreactor for astaxanthin production

The unicellular green microalga Haematococcus pluvialis accumulates large amounts of the red ketocarotenoid astaxanthin. Aiming to cultivate these microalgae with high astaxanthin efficiency, cultivations were scaled-up from 1000 mL bottle to 2 L and 8 L airlift photobioreactor using volumetric power consumption rate (W/m³) as scale up strategy. After cultivations, computational fluid dynamics (CFD) simulation was used to investigate the flow patterns, mixing efficiency and gas holdup profile within the 2 L photobioreactor. At the end, astaxanthin content was enhanced with increasing the cultivation volume and highest astaxanthin amount of 49.39 ± 1.64 mg/g cell was obtained in 8 L photobioreactor. Hydrodynamic characteristics of photobioreactor was simulated and gas holdup showed difference between the riser and the downcomer regions. Velocity profiles of air and medium had higher values inside the draft tube than obtained in downcomer region. However liquid circulation was achieved from draft tube to the downcomer, mixing was not provided effectively considering the turbulence kinetic energy. For the further research, some developments about column configuration, sparger diameter may be necessary to enhance the mixing characteristics.

Microalgal-Based Carbon Sequestration by Converting LNG-Fired Waste CO2 into Red Gold Astaxanthin: The Potential Applicability

The combinatorial approach of anthropogenic activities and CO2 sequestration is becoming a global research trend to alleviate the average global temperature. Although microalgae have been widely used to capture CO2 from industrial flue gas, the application of bioproducts was limited to bioenergy due to the controversy over the quality and safety of the products in the food and feed industry. Herein, the waste CO2 emitted from large point sources was directly captured using astaxanthin-hyperproducing microalgae Haematococcus pluvialis. Astaxanthin production was successfully carried out using the hypochlorous acid water-based axenic culture process under highly contamination-prone outdoor conditions. Consequently, after 36 days of autotrophic induction, the productivity of biomass and astaxanthin of H. pluvialis (the mutant) reached 0.127 g L−1 day−1 and 5.47 mg L−1 day−1 under high summer temperatures, respectively, which was 38% and 48% higher than that of wild type cell. After grinding the wet astaxanthin-enriched biomass, the extract was successfully approved by compliance validation testing from Korea Food and Drug Administration. The assorted feed improved an immune system of the poultry without causing any side effects. The flue gas-based bioproducts could certainly be used for health functional food for animals in the future.

High-efficiency cell disruption and astaxanthin recovery from Haematococcus pluvialis cyst cells using room-temperature imidazolium-based ionic liquid/water mixtures

Energy-saving, high-efficiency cell disruption is a critical step for recovery of thermolabile antioxidant astaxanthin from Haematococcus pluvialis cyst cells of rigid cell-wall structure. In this study, as room-temperature green solvents, 10 types of 1-ethyl-3-methylimidazolium ([Emim])-based ionic liquids (ILs) were compared and evaluated for their abilities to disrupt H. pluvialis cyst cells for astaxanthin/lipid extraction. Among the 10 ILs tested, 3 [Emim]-based ILs with HSO₄, CH₃SO₃, and (CF₃SO₂)₂N anions were selected based on astaxanthin/lipid extraction performance and synthesis cost. When pretreated with IL/water mixtures, intact cyst cells were significantly torn, broken or shown to release cytoplasmic components, thereby facilitating subsequent separation of astaxanthin/lipid by hexane. However, excess IL pretreatments at high temperature/IL dosages and longer incubation times significantly deteriorated lipid and/or astaxanthin. Under optimized mild conditions (6.7% (v/v) IL in water solution, 30 °C, 60 min), almost complete astaxanthin recoveries (>99%) along with moderate lipid extractions (∼82%) could be obtained.

Targeted knockout of phospholipase A2 to increase lipid productivity in Chlamydomonas reinhardtii for biodiesel production

Biofuel derived from microalgae have several advantages over other oleaginous crops, however, still needs to be improved with its cost aspect and can be achieved by developing of a strain with improved lipid productivity. In this study, the CRISPR-Cas9 system was incorporated to carry out a target-specific knockout of the phospholipase A₂ gene in Chlamydomonas reinhardtii. The targeted gene encodes a key enzyme in the Lands cycle. As a result, the mutants showed a characteristic of increased diacylglycerol pool, followed by a higher accumulation of triacylglycerol without being significantly compensated with the cell growth. As a result, the overall lipid productivities of phospholipase A₂ knockout mutants have increased by up to 64.25% (to 80.92 g L^-1 d^-1). This study can provide crucial information for the biodiesel industry.

Rapid selection of astaxanthin-hyperproducing Haematococcus mutant via azide-based colorimetric assay combined with oil-based astaxanthin extraction

The aim of this work was to develop a new approach for simple and high-throughput selection of astaxanthin-hyperproducing Haematococcus mutants through a sequential combination method of azide-based colorimetric assessment and oil-based astaxanthin quantification. Randomly mutagenized cells were spotted on solid culture medium containing 50 µM of sodium azide to accelerate the biosynthesis of astaxanthin. After 3 days, highly-induced mutants were preliminarily isolated by visual inspection and their astaxanthin accumulations were rapidly quantified by soybean oil-based extraction method. On the whole, the selected mutants showed reduced vegetative growth rates but eventually exhibited higher astaxanthin productions than the parental strain owing to their improved inductive growths. Among them, M13 showed 174.7 ± 5.69 mg L^-1 of the highest astaxanthin production, which is 1.59-times higher than that of wild-type. This wide-scope screening method expedites both upstream and downstream astaxanthin quantification, making it a useful tool for isolating microalgae with high astaxanthin production.

Butylated hydroxytoluene induces astaxanthin and lipid production in Haematococcus pluvialis under high-light and nitrogen-deficiency conditions

The aim of this study was to investigate the effects of butylated hydroxytoluene (BHT) on the production of astaxanthin and lipids in Haematococcus pluvialis LUGU under high-light and nitrogen-deficiency conditions. Astaxanthin and lipid contents were increased by 71.13% and 10.71%, respectively, in algal cells treated with 2 mg L^-1 BHT. The maximal contents of astaxanthin and lipids were 3.17% and 46%, respectively. The levels of reactive oxygen species (ROS) in the presence of BHT were lower than in the control, and this effect involved strong activation of several antioxidases. Additionally, BHT application upregulated endogenous nitric oxide (NO) production. These results showed that this approach is useful for stimulating production of astaxanthin and lipids in H. pluvialis and that exogenous BHT induces astaxanthin and lipid production, which is responsible for the signalling molecule responses against abiotic stress conditions in H. pluvialis.