Comparative study of hydrothermal pretreatment for rice straw and its corresponding mixture of cellulose, xylan, and lignin

Production of acetoin and its derivative tetramethylpyrazine from okara hydrolysate with Bacillus subtilis

Okara, a renewable biomass resource, is a promising fermentative raw material for the bio-production of value-added chemicals due to its abundance and low-costs. we developed a process for the enzymatic hydrolysis of okara, and then engineered Bacillus subtilis to utilize mixed sugars to produce acetoin in okara hydrolysis without the addition of a supplemental nitrogen source. Okara was initially hydrolyzed with cellulase, β-glucosidase, and pectinase to obtain okara hydrolysate containing mixed sugars (32.78 ± 0.23 g/L glucose, 1.43 ± 0.064 g/L arabinose, 7.74 ± 0.11 g/L galactose) and amino acids. In this study, Bacillus subtilis 168 was used as the acetoin-producing strain, and the key genes bdhA and acoA of the acetoin catabolism pathway were knocked out to improve the fermentation yield of acetoin. In order to utilize the galactose in the hydrolysate, the recombinant strain BS03 (Bacillus subtilis168∆bdhA∆acoA) was used to overexpress the arabinose transporter-encoding gene (araE) drive heterologous expression of the Leloir pathway gene (galKTE). The corn dry powder concentration was optimized to 29 g/L in the reducing sugar okara hydrolysate. The results show that the recombinant bacterium BS03 could still synthesize 11.79 g/L acetoin without using corn dry powder as a nitrogen source. Finally, using okara enzymatic hydrolysate as the carbon and nitrogen source, 11.11 g/L and 29.7 g/L acetoin were obtained by batch fermentation and fed-batch fermentation, respectively, which was further converted to 5.33 g/L and 13.37 g/L tetramethylpyrazine (TTMP) by reaction with an ammonium salt.

Preparation of biomass-based hydrogels and their efficient heavy metal removal from aqueous solution

In this work, a porous tobacco straw-based polyacrylic acid hydrogel STS-PAA with high adsorption performance was prepared by polymerizing pretreated waste tobacco straw (TS) with acrylic acid/potassium acrylate by UV radiation initiation. The adsorption performance of metal ions was investigated. The effects of different temperatures (25°C, 35°C, and 45°C), adsorption times (1-420 min), pH values (2.0-6.0) and initial concentrations (0.25-4.0 mmol L^-1) of metal ions on the adsorption amount of heavy metal ions were investigated. The results showed that the hydrogel had a high removal rate of Pb²⁺, Cd²⁺ and Hg²⁺ in aqueous solution. The adsorption of Pb²⁺ was particularly effective. When C₀ = 4.0 mmol L^-1, pH = 6, the equilibrium adsorption amount of Pb²⁺, Cd²⁺ and Hg²⁺ reached 1.49 mmol g^-1, 1.02 mmol L^-1 and 0.94 mmol g^-1, respectively. The chemical structure and morphology of the hydrogels were characterized by FT-IR, EDS, SEM and XPS. The Langmuir model fits well with the adsorption system. The kinetic data suggest the adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ follow the pseudo-first-order model. This indicates that STS-PAA adsorption of three heavy metal ions is monolayer physical adsorption. Thermodynamic analysis shows that the adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ by STS-PAA is an endothermic (ΔH>0) entropy increase (ΔS>0) non-spontaneous reaction.

The application of green solvent in a biorefinery using lignocellulosic biomass as a feedstock

The high dependence on crude oil for energy utilization leads to a necessity of finding alternative sustainable resources. Solvents are often employed in valorizing the biomass into bioproducts and other value-added chemicals during treatment stages. Unfortunately, despite the effectiveness of conventional solvents, hindrances such as expensive solvents, unfavourable environmental ramifications, and complicated downstream separation systems often occur. Therefore, the scientific community has been actively investigating more cost-effective, environmentally friendly alternatives and possess the excellent dissolving capability for biomass processing. Generally, 'green' solvents are attractive due to their low toxicity, economic value, and biodegradability. Nonetheless, green solvents are not without disadvantages due to their complicated product recovery, recyclability, and high operational cost. This review summarizes and evaluates the recent contributions, including potential advantages, challenges, and drawbacks of green solvents, namely ionic liquids, deep eutectic solvents, water, biomass-derived solvents and carbon dioxide in transforming the lignocellulosic biomass into high-value products. Moreover, research opportunities for future developments and potential upscale implementation of green solvents are also critically discussed.

Liquid hot water as sustainable biomass pretreatment technique for bioenergy production: A review

In recent years, lignocellulosic biomass has emerged as one of the most versatile energy sources among the research community for the production of biofuels and value-added chemicals. However, biomass pretreatment plays an important role in reducing the recalcitrant properties of lignocellulose, leading to superior quality of target products in bioenergy production. Among existing pretreatment techniques, liquid hot water (LHW) pretreatment has several outstanding advantages compared to others including minimum formation of monomeric sugars, significant removal of hemicellulose, and positive environmental impacts; however, several constraints of LHW pretreatment should be clarified. This contribution aims to provide a comprehensive analysis of reaction mechanism, reactor characteristics, influencing factors, techno-economic aspects, challenges, and prospects for LHW-based biomass pretreatment. Generally, LHW pretreatment could be widely employed in bioenergy processing from biomass, but circular economy-based advanced pretreatment techniques should be further studied in the future to achieve maximum efficiency, and minimum cost and drawbacks.

Hydrothermal pretreatment of lignocellulosic biomass for hemicellulose recovery

The hemicellulosic fraction recovery is of interest for integrated processes in biorefineries, considering the possibility of high economic value products produced from their structural compounds of this polysaccharide. However, to perform an efficient recovery, it is necessary to use biomass fractionation techniques, and hydrothermal pretreatment is highlighted as a valuable technique in the hemicellulose recovery by applying high temperatures and pressure, causing dissolution of the structure. Considering the possibility of this pretreatment technique for current approaches to hemicellulose recovery, this article aimed to explore the relevance of hydrothermal pretreatment techniques (sub and supercritical water) as a strategy for recovering the hemicellulosic fraction from lignocellulosic biomass. Discussions about potential products to be generated, current market profile, and perspectives and challenges of applying the technique are also addressed.

Anaerobic digestion of corn straw pretreated by ultrasonic combined with aerobic hydrolysis

Corn straw (CS) was pretreated by ultrasonic combined aerobic with biogas slurry as medium for anaerobic digestion (AD), that strengthened the degradation efficiency CS, varied in the composition of digestion slurry, thereby the methane production was increased. Central combinatorial design (CCD) test was used to treat CS at ultrasonic power (200, 400, and 600 W), time (10, 20, and 30 min) and AD for 25 days, at 37 ± 1℃. According to data showed that the pH and volatile fatty acids (VFAs) affected methane production directly. With an ultrasonic power 309 W, time 26 min, it reached the maximum content of VFAs with 16.24 g/L, the cumulative methane production achieved the highest with 198.56 mL/g VS, which was 46.73% higher than unpretreated raw material as CK. Ultrasonic-aerobic hydrolysis pretreatment can obtain higher VFAs and methane production content in a short period of time that is great significance to biogas engineering.

Ultrastructural change in lignocellulosic biomass during hydrothermal pretreatment

In recent years, visualization and characterization of lignocellulose at different scales elucidate the modifications of its ultrastructural and chemical features during hydrothermal pretreatment which include degradation and dissolving of hemicelluloses, swelling and partial hydrolysis of cellulose, melting and redepositing a part of lignin in the surface. As a result, cell walls are swollen, deformed and de-laminated from the adjacent layer, lead to a range of revealed droplets that appear on and within cell walls. Moreover, the certain extent morphological changes significantly promote the downstream processing steps, especially for enzymatic hydrolysis and anaerobic fermentation to bioethanol by increasing the contact area with enzymes. However, the formation of pseudo-lignin hinders the accessibility of cellulase to cellulose, which decreases the efficiency of enzymatic hydrolysis. This review is intended to bridge the gap between the microstructure studies and value-added applications of lignocellulose while inspiring more research prospects to enhance the hydrothermal pretreatment process.

The Pretreatment of Lignocelluloses With Green Solvent as Biorefinery Preprocess: A Minor Review

Converting agriculture and forestry lignocellulosic residues into high value-added liquid fuels (ethanol, butanol, etc.), chemicals (levulinic acid, furfural, etc.), and materials (aerogel, bioresin, etc.) via a bio-refinery process is an important way to utilize biomass energy resources. However, because of the dense and complex supermolecular structure of lignocelluloses, it is difficult for enzymes and chemical reagents to efficiently depolymerize lignocelluloses. Strikingly, the compact structure of lignocelluloses could be effectively decomposed with a proper pretreatment technology, followed by efficient separation of cellulose, hemicellulose and lignin, which improves the conversion and utilization efficiency of lignocelluloses. Based on a review of traditional pretreatment methods, this study focuses on the discussion of pretreatment process with recyclable and non-toxic/low-toxic green solvents, such as polar aprotic solvents, ionic liquids, and deep eutectic solvents, and provides an outlook of the industrial application prospects of solvent pretreatment.

Effect of Different Pretreatment of Birch Sawdust on the Production of Active Polysaccharides by Inonotus obliquus Under Submerged Fermentation and Its Structural Mechanism

This study examined the effects of different pretreatments of birch sawdust on the production and activity of polysaccharides by Inonotus obliquus, and in order to explore the mechanism, structural characterization and analysis were carried out. The result clearly indicated that alkali treatment, ozone treatment, and alkali combined with ozone treatment of birch sawdust could be all helpful for the production of active polysaccharide by I. obliquus. Among four pretreatment groups, birch sawdust treated with alkali showed the highest increase in the exo-polysaccharide content (39.90%) and the inhibition rate of α-glucosidase (80.78%) within 11 days by the mycelium of I. obliquus through deep fermentation, in comparison to water-washed birch sawdust. Through a single-factor analysis and orthogonal experimental design, the optimum alkali treatment condition was as follows: NaOH concentration 1%, temperature 60 °C, and time 3 h. Moreover, the structural characteristics of pretreated birch sawdust with the optimum alkali treatment condition before and after fermentation by the mycelium of I. obliquus was performed by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electronic microscopy. The results showed that alkali treatment destroyed the lignin structure of birch sawdust, exposed the cellulose in the amorphous area, reduced the crystallinity of lignocellulose, and damaged the surface structure of birch sawdust, which had a further damage and a greater degradation degree of birch sawdust after fermentation, indicating that alkali pretreatment was beneficial for utilization of birch sawdust by I. obliquus.

Efficient and Selective Catalytic Conversion of Hemicellulose in Rice Straw by Metal Catalyst under Mild Conditions

Rice straw is an abundant material with the potential to be converted into a sustainable energy resource. Transition-metal catalysis activated the C–O bond in the hemicellulose of raw rice straw, cleaving it to form monosaccharides. The mechanism of rice straw catalytic conversion had a synergistic effect due to in situ acid catalysis and metal catalysis. The conditions for the hydrogenation of hemicellulose from rice straw were optimized: catalyst to rice straw solid/solid ratio of 3:10, stirring speed of 600 r/min, temperature of 160 °C, time of 3 h, solid/liquid ratio of 1:15, and H2 gas pressure of 1.5 MPa. An excellent hemicellulose conversion of 97.3% with the yields of xylose and arabinose at 53.0% and 17.3%, respectively, were obtained. The results from FTIR and SEM experiments also confirmed the destruction of the rigidity and reticulate structure of rice straw after the catalytic reaction.

Bacterial-mediated recovery of copper from low-grade copper sulphide using acid-processed rice straw

Bacteria community and copper recovery in presence of acid-processed rice straw (ARW) were explored during low-grade copper sulphide bioleaching. The results indicated a strongly promoting response of appropriate-quality ARW with improved bacteria concentration and enhanced copper recovery. The highest bacteria concentration reached 9.54 × 10⁷ cells·mL^-1 with an increase by 69.15%. And a maximum of 95.32% copper leaching rate with a relatively low Fe³⁺ concentration (329.00 mg·L^-1) was obtained in presence of 1.0 g powdered ARW compared to only 83.40% in its absence. That is due to less development of passivation layer formed by Fe³⁺ hydrolysis, which is contributed by reducing ARW. 16S rDNA analysis illustrated the dominant leaching bacteria (Acidithiobacillus ferrooxidans) was influenced significantly, whose proportion reached 40.38% to the total bacteria when the ARW was added compared to 15.92% in its absence. And Stenotrophomonas accounted for the highest proportion of the bacteria community throughout bioleaching process.

Furfural wastewater pretreatment of corn stalk for whole slurry anaerobic co-digestion to improve methane production

Previous studies showed that excellent anaerobic digestion performance could be achieved using acid pretreatment, whereas the development of acid pretreatment was limited by high cost of acid consumption and severe operation. The aim of this study consisted in expanding the possibilities of low-cost acid pretreatment method for anaerobic digestion. For this, the feasibility of substituting conventional acid pretreatment with furfural wastewater was verified, and the whole slurry anaerobic digestion was performed to improve the production of methane. The furfural wastewater was used to pretreat crop stalk at different ambient temperatures (20, 35, 50°C) for different time periods (0, 3, 6, 9days). Subsequently, all treated and untreated crop stalk were digested at 35°C for 25days. According to experimental data showed that the dissimilar degradability of compositions for crop stalk was due to furfural wastewater pretreatment, and the reducing sugar content, volatile fatty acid content, pH during pretreatment phase, and their initial maximum & minimum values in anaerobic digestion phase were changed, which made a significant difference in methane production. The highest total methane production of anaerobic digestion (196.68mL/g VS) was achieved by the treatment at 35°C for 6days, which was 59.28% higher than untreated crop stalk (123.48mL/g VS). On the whole, the results showed that furfural wastewater pretreatment followed by the whole slurry anaerobic co-digestion was feasible and could contribute to application value for anaerobic digestion industry while providing an effective way for the treatment of furfural wastewater.

Effects of hydrochloric acid washing on the microstructure and pyrolysis bio-oil components of sweet sorghum bagasse

Acid washing is an alternative and promising approach for biomass to produce high-quality bio-oil. The hydrochloric acid washing pretreatment of sweet sorghum bagasse was performed in this study. The effects of acid washing on the ultrastructure of sweet sorghum bagasse were investigated using scanning electron microscope and Fourier transform infrared, and the effects on pyrolysis using thermogravimetric analyzer and a fast pyrolysis device. The results indicated acid treatment obviously changed the surface morphology of the cell walls of sweet sorghum bagasse, effectively removed most metals from sweet sorghum bagasse, and increased the volatiles and bio-oil yields. The results showed that bio-oil produced from pretreated sweet sorghum bagasse contained less components categories, lower contents of phenols, aldehydes, furans and alcohols, while much higher contents of d-allose and ketones than that from the original sample. Hydrochloric acid-washing pretreatment of sweet sorghum bagasse can increase the contents of some high-value chemicals in bio-oil.

Bioethanol production from bamboo with alkali-catalyzed liquid hot water pretreatment

Altering recalcitrant structures of bamboo is essential to obtain high yield of bioethanol via bioconversion process. With the goal of improving cell wall digestibility, alkaline liquid hot water was used to pretreat N. affinis. The effects of temperature and alkali dosage on structural alterations were determined by chemical composition, Brunauer Emmett Teller (BET) and gel permeation chromatography (GPC). The relationship between these changes and substrate digestibility was addressed by separate enzymatic hydrolysis and fermentation (SHF). The results indicated that pretreatments partly removed and degraded hemicelluloses and lignin, reducing yields of substrates and molecular weights of carbohydrates. With the change of cell wall structure, specific surface area of materials increased after LHW pretreatment but decreased with further removal of lignin and hemicellulosic fractions. Maximum bioconversion was obtained by pretreatment with 0.5% NaOH aqueous at 170 °C and SHF, yielding 4.8 g/L ethanol.

Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture

High-performance microporous activated carbon (AHC) for CO2 capture was prepared from an emerging marine pollutant, Sargassum horneri, via hydrothermal carbonization (HTC) and KOH activation. The as-synthesized carbon material was characterized by N2 sorption-desorption measurement, TGA, SEM, XRD, FTIR, and elemental analysis. Impressively, the activated carbon exhibited high specific surface area (1221 m2/g), narrow distributed micropores (∼0.50 nm), and a relatively high nitrogen content (3.56 wt.%), which endowed this carbon material high CO2 uptake of 101.7 mg/g at 30°C and 1 bar. Moreover, the carbon material showed highly stable CO2 adsorption capacity and easy regeneration over four adsorption-desorption cycles. Two kinetic models were employed in this work and found that the pseudo-first-order kinetic model (R2 = 0.99) provided the best description. In addition, the high CO2 uptake is mainly attributed to the presence of abundant narrow microporous. The macroporous structure of hydrochar (HC) played an important role in the production of microporous carbon with high adsorption properties. This work provides an efficient strategy for preparing microporous activated carbon from Sargassum horneri, and AHC is a promising candidate acting as an efficient CO2 adsorbent for further industrial application.

Chemo-enzymatic synthesis of furfuralcohol from chestnut shell hydrolysate by a sequential acid-catalyzed dehydration under microwave and Escherichia coli CCZU-Y10 whole-cells conversion

In this study, chemo-enzymatic synthesis of furfuralcohol from biomass-derived xylose was successfully demonstrated by a sequential acid-catalyzed dehydration under microwave and whole-cells reduction. After dry dewaxed chestnut shells (CNS, 75 g/L) was acid-hydrolyzed with dilute oxalic acid (0.5 wt%) at 140 °C for 40 min, the obtained CNS-derived xylose (17.9 g/L xylose) could be converted to furfural at 78.8% yield with solid acid SO₄^2-/SnO₂-Attapulgite (2.0 wt% catalyst loading) in the dibutyl phthalate-water (1:1, v:v) under microwave (600 W) at 180 °C for 10 min. In the dibutyl phthalate-water (1:1, v/v) media at 30 °C and pH 6.5, the furfural liquor (47.0 mM furfural) was biologically converted to furfuralcohol by recombinant Escherichia coli CCZU-Y10 whole-cells harboring an NADH-dependent reductase (PgCR) without extra addition of NAD⁺ and glucose, and furfural was completely converted to furfuralcohol after 2.5 h. Clearly, this one-pot synthesis strategy can be effectively used for furfuralcohol production.