Effect of organic carbon to nitrogen ratio in wastewater on growth, nutrient uptake and lipid accumulation of a mixotrophic microalgae Chlorella sp

Human activities-impacted lake dissolved organic matter (DOM) affects phycosphere microbial diversity and DOM diversification via carbon metabolism

Photosynthetic carbon sequestration and microbial carbon metabolism are major processes of algae-bacteria interactions, affecting pollutant degradation as well as fundamental biogeochemical cycles in aquatic systems. Human-induced land-use changes greatly alter the molecular composition and input of terrestrial dissolved organic matter (DOM) in inland lakes. However, how the origin of DOM leads to varying effects on phycosphere microbial communities or molecular composition of DOM, e.g., via carbon metabolism, has been little studied in freshwater. Here, we incubated the cyanobacterium Microcystis aeruginosa and a bacterial community from natural lakes to establish an alga-bacteria model system. This allowed us to investigate how DOM from different sources affects phycosphere microbial diversity and DOM diversification. We showed that Suwannee River fulvic acid (SRFA), Suwannee River natural organic matter (SRNOM) and cropland lake DOM promote algal growth, whereas DOM from an urban lake inhibits algal growth. Algal metabolites and DOM together shaped the chemotaxis response of phycosphere communities. High-resolution mass spectrometry analysis demonstrated that DOM chemo-diversity tended to become uniform after interactions of diverse DOM sources with the algae-bacteria symbiosis system. Molecular thermodynamic analysis of DOM based on a substrate-explicit model further verified that microbial interactions render DOM less bioavailable and thus increase recalcitrant DOM formation. Metabolome analysis uncovered that DOM addition intensifies metabolic pathways related to labile and recalcitrant DOM utilization (mainly lignin/carboxyl-rich alicyclic molecule (CRAM)-like DOM, unsaturated hydrocarbon), whereby cofactor and vitamin metabolism represented an extremely strong activity in all metabolic pathways. Our results highlight covariation and interactions of DOM with microbial metabolism at the molecular level and expands our understanding of microbially mediated DOM shaping aquatic carbon cycling.

Artificial photosynthesis: Promising approach for the efficient production of high-value bioproducts by microalgae

Recently, microalgae had received extensive attention for carbon capture and utilization. But its overall efficiency still could not reach a satisfactory degree. Artificial photosynthesis showed better efficiency in the conversion of carbon dioxide. However, artificial photosynthesis could generally only produce C1-C3 organic matters at present. Some studies showed that heterotrophic microalgae can efficiently synthesize high value organic matters by using simple organic matter such as acetate. Therefore, the combination of artificial photosynthesis with heterotrophic microalgae culture showed great potential for efficient carbon capture and high-value organic matter production. This article systematically analyzed the characteristics and challenges of carbon dioxide conversion by microalgae and artificial photosynthesis. On this basis, the coupling mode and development trend of artificial photosynthesis combined with microalgae culture were discussed. In summary, the combination of artificial photosynthesis and microalgae culture has great potential in the field of carbon capture and utilization, and deserves further study.

Low-Cost Greywater Treatment Using Polyculture Microalgae-Microalgal Growth, Organics, and Nutrient Removal Subject to pH and Temperature Variations During the Treatment

Organics and nutrient removal studies are rarely done using polyculture microalgae, and that too in outdoor conditions, as they are often not deemed effective for wastewater treatment purposes. This study examined the organics and nutrient removal efficiency of polyculture microalgae cultivated in greywater. The reactor was operated in outdoor conditions. Hence, it was subjected to natural pH and temperature variations. A growth rate of 0.05 g L-1 day-1 was observed for temperatures up to 37 °C, beyond which the growth rate declined by 0.07 g L-1 day-1. During the treatment, the pH of the system was observed to be between 7.4 and 8.4. However, the growth rate would again pick up (0.05 g L-1 day-1) when the pH and temperature moved towards the optimum range, indicating that the polycultures adapt very quickly to their environment. The maximum biomass concentration reached 0.82 gL-1. The highest removal efficiency of organic carbon, ammonia, and phosphate was 80.7, 61.9, and 58.4%, respectively. Nitrate and nitrite concentrations remained ≤ 1.3 mgL-1 and ≤ 2 mgL-1, respectively, indicating the absence of nitrification/denitrification and ammonia volatilization. The mass balance of microalgae indicated that the primary removal mechanism of nitrogen and phosphorus removal was assimilation by the microalgae. The study proved polyculture microalgae to be as effective as some monoculture species in wastewater treatment, which require costlier controlled growth conditions. The high organics and nutrient removal by polycultures in outdoor conditions could pave the way to reducing wastewater treatment costs.

Biocompounds from wastewater-grown microalgae: a review of emerging cultivation and harvesting technologies

Microalgae biomass has attracted attention as a feedstock to produce biofuels, biofertilizers, and pigments. However, the high production cost associated with cultivation and separation stages is a challenge for the microalgae biotechnology application on a large scale. A promising approach to overcome the technical-economic limitations of microalgae production is using wastewater as a nutrient and water source for cultivation. This strategy reduces cultivation costs and contributes to valorizing sanitation resources. Therefore, this article presents a comprehensive literature review on the status of microalgae biomass cultivation in wastewater, focusing on production strategies and the accumulation of valuable compounds such as lipids, carbohydrates, proteins, fatty acids, and pigments. This review also covers emerging techniques for harvesting microalgae biomass cultivated in wastewater, discussing the advantages and limitations of the process, as well as pointing out the main research opportunities. The novelty of the study lies in providing a detailed analysis of state-of-the-art and potential advances in the cultivation and harvesting of microalgae, with a special focus on the use of wastewater and implementing innovative strategies to enhance productivity and the accumulation of compounds. In this context, the work aims to guide future research concerning emerging technologies in the field, emphasizing the importance of innovative approaches in cultivating and harvesting microalgae for advancing knowledge and practical applications in this area.

Effect of external acetate added in aquaculture wastewater on mixotrophic cultivation of microalgae, nutrient removal, and membrane contamination in a membrane photobioreactor

The mixotrophic cultivation of microalgae in wastewater has attracted extensive attention due to its many advantages. In this study, acetate, which can be prepared by hydrolysis of aquaculture waste, was used as exogenous organic matter to promote the growth of Chlorella pyrenoidosa cultured in aquaculture wastewater. Microalgae cultivation was carried out in a membrane photobioreactor (MPBR) with continuous inflow and outflow mode. The results showed that exogenous acetate greatly promoted the mixotrophic growth of C. pyrenoidosa. When the dosage of acetate reached 1.0 g L-1, the relative growth rate of microalgae in the logarithmic stage reached 0.31 d-1, which was 4.4 times that of the control. As a result, exogenous acetate also promoted the removal of nutrients from aquaculture wastewater. During the stable operation stage of the MPBR with acetate added in the influent, an average of 87.41%-93.93% nitrogen and 76.34%-88.55% phosphorus was removed from the aquaculture wastewater containing 19.41 mg L-1 total inorganic nitrogen and 1.31 mg L-1 total inorganic phosphorus. However, it was worth noting that adding exogenous acetate also led to an increase in the membrane resistance of the membrane module in the MPBR. Membrane resistance was mainly composed of internal resistance (Ri) and cake resistance (Rc), and with the increase of acetate content in the influent, their proportion in the total resistance gradually increased. Ri contributed the major membrane resistance and was most affected by acetate dosage. Ri reached 32.04 × 1012 m-1 with 1 g L-1 acetate, which accounted for 69.49% of total resistance. Moreover, with the increase of influent acetate concentration of the MPBRs, both the number of insoluble contaminants and dissolved organic contaminants in the membrane modules increased. In addition, the composition of proteins, polysaccharides, and humus in dissolved organic contaminants was close to that in extracellular polymeric substances and soluble microbial products secreted by microalgae. These results suggested that the membrane fouling of membrane modules was closely related to the algal biomass content in the MPBRs. The above results provided a theoretical basis for reducing membrane fouling of MPBR.

A collaborative effect of solid-phase denitrification and algae on secondary effluent purification

This study explored the collaborative effect on nutrients removal performance and microbial community in solid-phase denitrification based bacteria-algae symbiosis system. Three biodegradable carriers (apple wood, poplar wood and corncob) and two algae species (Chlorella vulgaris and Chlorella pyrenoidosa) were selected in these bacteria-algae symbiosis systems. Results demonstrated that corncob as the carrier exhibited the highest average removal efficiencies of total nitrogen (83.7%-85.1%) and phosphorus removal (38.1%-49.1%) in comparison with apple wood (65.8%-71.5%, 25.5%-32.7%) and poplar wood (42.5%-49.1%, 14.2%-20.7%), which was mainly attributed to the highest organics availability of corncob. The addition of Chlorella acquired approximately 3%-5% of promotion rates for nitrated removal among three biodegradable carriers, but only corncob reactor acquired significant promotions by 3%-11% for phosphorous removal. Metagenomics sequencing analysis further indicated that Proteobacteria was the largest phylum in all wood reactors (77.1%-93.3%) and corncob reactor without Chlorella (85.8%), while Chlorobi became the most dominant phylum instead of Proteobacteria (20.5%-41.3%) in the corncob with addition of Chlorella vulgaris (54.5%) and Chlorella pyrenoidosa (76.3%). Thus, the higher organics availability stimulated the growth of algae, and promoted the performance of bacteria-algae symbiosis system based biodegradable carriers.

Lipid accumulation mechanism of Amphora coffeaeformis under nitrogen deprivation and its application as a feed additive in Carassius auratus aquaculture

BACKGROUND

Amphora coffeaeformis, a unicellular diatom, can significantly accumulate lipids under nitrogen (N) limitation. However, the molecular mechanism underlying lipid accumulation in A. coffeaeformis remains unknown and its application development is lagging.

RESULTS

This work analyzed the lipid composition of A. coffeaeformis under N deprivation and investigated its mechanism underlying lipid accumulation using RNA-seq. The results showed that the total lipid content of A. coffeaeformis increased from 28.22 to 44.05% after 5 days of N deprivation, while the neutral lipid triacylglycerol (TAG) content increased from 10.41 to 25.21%. The transcriptional profile showed that N deprivation induced wide-ranging reprogramming of regulation and that most physiological activities were repressed, while the upregulation of glycerol-3-phosphate acyltransferase directly determined TAG accumulation. Moreover, we explored the effect of A. coffeaeformis as a food additive on the lipid composition of crucian carp. The results showed that the contents of unsaturated fatty acids in the meat of fish supplemented with A. coffeaeformis were significantly increased, indicating its potential application in animal nutrition for improving meat quality indicators.

CONCLUSION

The findings shed light on the molecular mechanisms of neutral lipid accumulation and revealed the key genes involved in lipid metabolism in A. coffeaeformis. Moreover, we also confirmed that A. coffeaeformis can be used as feed additive for improving the lipid composition of crucian carp meat, which provided evidence for the biotechnology application of this high-oil microalgae.

Abiotic factors improving fatty acid profiling of freshwater indigenous microalgae isolated from Kumaun region of Uttarakhand, India

Microalgae have grabbed huge attention as a potential feedstock for biofuel production in response to the rise in energy consumption and the energy crisis. In the present study, indigenous microalgal strains were isolated from four freshwater lakes in the Kumaun region, Uttarakhand, India. Based on growth and lipid profiles, the four best-performing isolates were selected for further experiments. Initial identification of isolates was done by morphological observations, which were further validated by molecular identification using ITS sequencing. The screened cultures were subjected to abiotic stress conditions (varying concentrations of nitrogen and different temperatures) to monitor the biomass, lipid accumulation, and biochemical compositions (chlorophyll and carotenoids). The quantification of fatty acids was checked via gas chromatographic analysis. The strains were identified as KU_MA3 Chlamydopodium starrii, KU_MA4 Tetradesmus nygaardii, KU_MA5 Desmodesmus intermedius, and KU_MA6 Tetradesmus nygaardii. KU_MA3 Chlamydopodium starrii showed the best results in terms of growth and lipid production at 21 °C and 0.37 g/L NaNO2 concentration. The percentage of fatty acid methyl esters (FAMEs) attained >80% and met the standard for biodiesel properties. The strain has the potential to attain higher biomass and accumulate higher lipid content, and after some more studies, it can be used for upscaling processes and large-scale biodiesel production.

Bioenergy production from swine wastewater based on a combined process of anaerobic dynamic membrane reactor and microalgae cultivation: Feasibility and performance

Enhanced methane production and sustainable reduction of pollutants from anaerobic digestate are crucial for swine wastewater treatment. In this study, anaerobic dynamic membrane bioreactor (AnDMBR) was introduced to enhance methane production, then microalgae were cultivated on the digestate for nutrients recovery and lipid production. Results showed that pollutants can be effectively removed under various hydraulic retention time (HRT) conditions during long-term operation. Methanogenesis was enhanced with the reduction of HRT from 20 days to 10 days (0.23 L-CH4/g-CODremoved), but inhibited by shortening HRT to 5 days (0.09 L-CH4/g-CODremoved). Ammonia and phosphate in the digestate were effectively removed after microalgae cultivation. In addition, the highest microalgal biomass and lipid productivity (1.7 g/L and 17.5 mg/(L·d), respectively) were obtained using digestate ratio of 20 %, while microalgal growth was seriously restricted at high digestate content (>50 %). This work provides a prospective pathway for pollutants control and energy production from swine wastewater through integrating of AnDMBR technology with microalgae cultivation.

Solar bioreactors used for the industrial production of microalgae

Microalgae are excellent sources of biomass containing several important compounds for human and animal nutrition-proteins, lipids, polysaccharides, pigments and antioxidants as well as bioactive secondary metabolites. In addition, they have a great biotechnological potential for nutraceuticals, and pharmaceuticals as well as for CO2 sequestration, wastewater treatment, and potentially also biofuel and biopolymer production. In this review, the industrial production of the most frequently used microalgae genera-Arthrospira, Chlorella, Dunaliella, Haematococcus, Nannochloropsis, Phaeodactylum, Porphyridium and several other species is discussed as concerns the applicability of the most widely used large-scale systems, solar bioreactors (SBRs)-open ponds, raceways, cascades, sleeves, columns, flat panels, tubular systems and others. Microalgae culturing is a complex process in which bioreactor operating parameters and physiological variables closely interact. The requirements of the biological system-microalgae culture are crucial to select the suitable type of SBR. When designing a cultivation process, the phototrophic production of microalgae biomass, it is necessary to employ SBRs that are adequately designed, built and operated to satisfy the physiological requirements of the selected microalgae species, considering also local climate. Moreover, scaling up microalgae cultures for commercial production requires qualified staff working out a suitable cultivation regime. KEY POINTS: • Large-scale solar bioreactors designed for microalgae culturing. • Most frequently used microalgae genera for commercial production. • Scale-up requires suitable cultivation conditions and well-elaborated protocols.

Advancements of microalgal upstream technologies: Bioengineering and application aspects in the paradigm of circular bioeconomy

Sustainable energy transition has brought the attention towards microalgae utilization as potential feedstock due to its tremendous capabilities over its predecessors for generating more energy with reduced carbon footprint. However, the commercialization of microalgae feedstock remains debatable due to the various factors and considerations taken into scaling-up the conventional microalgal upstream processes. This review provides a state-of-the-art assessment over the recent developments of available and existing microalgal upstream cultivation systems catered for maximum biomass production. The key growth parameters and main cultivation modes necessary for optimized microalgal growth conditions along with the fundamental aspects were also reviewed and evaluated comprehensively. In addition, the advancements and strategies towards potential scale-up of the microalgal cultivation technologies were highlighted to provide insights for further development into the upstream processes aimed at sustainable circular bioeconomy.

Growth of Scenedesmus obliquus on anaerobic soybean wastewater using different wasted organics for high biomass production and nutrients recycling

The microalgae culture in mixing sewage with different characteristics may significantly improve biomass production and nutrients recycling efficiency. In this study, three waste organic wastewater including molasses, alcohol and glycerol wastewater were mixed with anaerobic soybean wastewater as mediums for microalgae culture. The optimal mixture of molasses, alcohol and glycerol wastewater was at an initial carbon-nitrogen ratio of 7:1, 5:1 and 10:1, improving biomass production by 60.4%, 31.3% and 68.7%, respectively. The removal efficiencies of organics, ammonia nitrogen and phosphorus at optimal mixture were 54.8-62.4%, 79.5-99.1% and 49.3-61.5%, and the removal rates increased by 340-630%, 27.5-66.3% and 36.3-70.2% compared to the blank culture. In addition, the culture in mixed wastewater increased lipids contrast by 0.7-1.3 times, while achieving higher saturation in fatty acids. The results suggested that microalgae culture using mixed wastewater was a strategy for high biomass production and nutrients recycling efficiency.

Fundamental alteration of cellular biochemicals from attached microalgae onto palm kernel expeller waste upon optimizing the growth environment in forming adhesion complex

Changing the growth environment for microalgae can overall lead to the fundamental alteration in cellular biochemicals whilst attaching onto palm kernel expeller (PKE) waste to form adhesion complex in easing harvesting at stationary growth phase. This study had initially optimized the PKE dosage, light intensity and photoperiod in maximizing the attached microalgal productivity being attained at 0.72 g/g day. Lipid content increased progressively from pH 3 to pH 11, with the highest value observed at pH 11. Meanwhile, in terms of protein and carbohydrate contents, the highest values were obtained by cultivation medium of pH 5 with 9.92 g and 17.72 g, respectively followed by pH 7 with 9.16 g and 16.36 g, respectively. Moreover, the findings also suggested that the low pH mediums utilized polar interactions in the formation of complexes between PKE and microalgae, whereas at higher pH levels, the non-polar interactions became more significant. The work of attachment was thermodynamically favourable towards the attachment formation with values greater than zero which was also aligned with the microscopic surface topography, i.e., revealing a clustering pattern of microalgae colonizing the PKE surface. These findings contribute to comprehensive understanding of optimizing growth condition and harvesting strategy of attached microalgae in attaining the cellular biochemical components, facilitating the development of efficient and sustainable bioresource utilization.

Insights into differences between spore-assisted and pellet-assisted microalgae harvesting using a highly efficient fungus: Efficiency, high-value substances, and mechanisms

To achieve efficient and low-cost microalgae harvesting, investigations were conducted on the harvesting efficiency and potential mechanisms of Chlorella sp. HQ by filamentous fungi using two strategies, fungal spore-assisted harvesting (FSH) and fungal pellet-assisted harvesting (FPH). Five of the 19 fungal species isolated from domestic sewage could form pellets, and Aspergillus niger HW8-1 comprised the highest harvesting efficiencies of 99.17 % and 88.70 % for FPH and FSH, respectively. FSH had 2-3 times more lipids and polysaccharides in fungus-alga pellets and caused richer saturated and monounsaturated fatty acids compared with FPH. Moreover, by optimizing the microalgae preculture time, glucose concentration, and microalgae initial density, the contents of high-value substances, such as lipids, polysaccharides, and proteins of fungus-alga pellets after FPH were improved from 5.96 %, 5.67 %, and 7.27 % to 20.18 %, 24.34 % and 10.48 %, respectively. Furthermore, fungal pellets secreted more extracellular polymeric substances (EPS) during FPH than those by FSH, which could chemisorb algal cells by lowering the surface potential of fungal pellets. FPH caused algal cells to cover the outside, which increased the light exposure area of algae, thereby increasing the photosynthesis rate, whereas FSH mainly captured microalgae physically through mycelium entanglement.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

Efficient coupling of sulfadiazine removal with microalgae lipid production in a membrane photobioreactor

This study explored the feasibility of a coupled system for antibiotic removal and biofuel production through microalgae cultivation. Initial, batch culture experiments demonstrated that sulfadiazine (SDZ) had an inhibitory effect on Chlorella sp. G-9, and 100.0 mg L-1 SDZ completely inhibited its growth. In order to improve SDZ removal efficiency by microalgae, three membrane photobioreactors (MPBRs) with different hydraulic retention times (HRTs) were established for continuous microalgae cultivation. The efficient coupling of SDZ removal and microalgal lipid production was achieved through the gradual increment of influent SDZ concentration from 0 to 100.0 mg L-1. The reduction in SDZ ranged between 57.8 and 89.7%, 54.7-91.7%, and 54.6-93.5% for the MPBRs with HRT of 4 d, 2 d, and 1 d, respectively. Chlorella sp. Was found to tolerate higher concentrations of SDZ in the MPBR system, and the resulting stress from high concentrations of SDZ effectively increased the lipid content of microalgae for potential biodiesel production. With the increase of influent SDZ concentration from 0 to 100.0 mg L-1, the lipid content of microalgae increased by 43.5%. Chlorophyll content, superoxide dismutase activity, and malondialdehyde content of microalgae were also evaluated to explore the mechanism of microalgae tolerance to SDZ stress in MPBR.

Microalgae on distillery wastewater treatment for improved biodiesel production and cellulose nanofiber synthesis: A sustainable biorefinery approach

Sugarcane spent wash generates waste at a large scale that impacts the environment, hence the classic waste reuse technology needs to be implemented. An integrated approach of spent wash and microalgae cultivation to produce biodiesel has gained momentum in recent times. However, the microalgae technology lacks the functional utilization of de-oiled microalgae biomass (DOB). This study proposed the development of a microalgae-based advanced process for distillery spent wash treatment, biomass recovery for biodiesel and utilizing algal residue as a step towards waste management. A novel microalga Coelastrella sp KJ-04 grown in distillery spent wash represented with high biomass (4.61g/L) and lipid production (3.6 g/L). The significant reduction in Chemical Oxygen Demand (COD, 49.3%), Total Nitrogen (TN, 49.7%), Total Phosphorous (TP, 21.8%), Total Organic Carbon (TOC, 40.2%), Total Sulphur (S, 37.2%) and Potassium (K, 42.5%) were achieved in spent wash. The extracted lipids of Coelastrella sp KJ-04 were converted to Fatty acid methyl ester (FAME) and examined by Gas chromatography -mass spectrometry (GC-MS) to observe the suitability for biodiesel prospect. The de-oiled biomass (DOB) was utilized for the synthesis of Cellulose nanofibers (CNF), purified and estimated with a diameter ranging between 20 and 27 nm. The crystalline structure and functional group of CNF were analyzed by X-ray diffraction (XRD) and Fourier Transform infrared spectroscopy (FTIR). The unprecedented work demonstrated the microalgae biorefinery approach for spent wash remediation, biodiesel synthesis and simultaneous production of biodegradable CNF from algal residue to support waste-free technology. In future, CNF can be reinforced into material for concrete as it could be the smart alternative to replace synthetic cement plastics.

A comparison of nitrogen removal systems through cost-coupled life cycle assessment and energy efficiency analysis

The global water crisis reflects the necessity of exploring the best approaches for the water supply. Therefore, for the first time, the current study compares nitrogen removal systems (NRSs) from life cycle assessment (LCA), economic, kinetic, thermodynamic, and synergistic perspectives. The assessed systems were sequential batch reactor (SBR), oxic/anoxic (OA), and oxic/anaerobic/oxic (OAO) bioreactors. Among all, the SBR configuration showed the best efficiency (98.74 %) for nitrogen removal. The environmental impacts notably presented by marine + freshwater ecotoxicity (53.76 %), and climate change categories (16.39 %), significantly because of metal emissions. Non-renewable sources supplied 95 % of total energy demand. The operation of NRSs showed the most impact on human health (63.67 %) through CH₄ and CO₂ emissions. The total costs significantly belonged to the construction (<86.37 %) > amortization> operation. The influent COD illustrated the most role in environmental burdens (16.44 %) based on the sensitivity analysis. The removal reaction was endothermic, physical, non-spontaneous, and followed a pseudo-second-order kinetic model (R² > 0.98). The chemical exergy provided the major portion of the total calculated exergy (83 %). The exergetic efficiency of the system was 69 %, which was predominantly supplied by biogas (∼50.75 %). Accordingly, this study can present a stepwise guideline for further related investigations.

Screening of microalgae species and evaluation of algal-lipid stimulation strategies for biodiesel production

Microalgae is considered an alternative source for biodiesel production producing renewable, sustainable and carbon-neutral energy. Microalgae property changes among species, which determines the efficiency of biodiesel production. Besides the lipid content evaluation, multi-principles (including high lipid productivity, high biomass yield, pollution resistance and desired fatty acid, etc.) for superior oil-producing species screening was proposed in this review and three microalgae species (Chlorella vulgaris, Scenedesmus obliquus and Mychonastes afer) with high bio-lipid producing prospect were screened out based on big data digging and analysis. The multilateral strategies for algal-lipid stimulating were also compared, among which, nutrient restriction, temperature control, heterotrophy and chemicals addition showed high potential in enhancing lipid accumulation; while electromagnetic field showed little effect. Interestingly, it was found that the lipid accumulation was more sensitive to nitrogen (N)-limitation other than phosphorus (P). Nutrient restriction, salinity stress etc. enhanced lipid accumulation by creating a stressed environment. Hence, optimum conditions (e.g. N:15-35 mg/L and P:4-16 mg/L) should be set to balance the lipid accumulation and biomass growth, and further guarantee the algal-lipid productivity. Otherwise, two-step cultivation could be applied during all the stressed stimulation. Different from lab study, effectiveness, operability and economy should be all considered for stimulation strategy selection. Nutrient restriction, temperature control and heterotrophy were highly feasible after the multidimensional evaluation.

Nutrient cycling enhancement in intensive-extensive aquaculture through C/N ratio manipulation and periphyton support

The external carbon source and the installation of periphyton structures were applied in combined intensive-extensive aquaculture to test their efficiency of nutrient utilization to support clean and efficient fish production. Two aquaculture systems were tested, with one additionally treated with methanol as a source of carbohydrates for microbial activity stimulation and an additional area for periphyton installed. Each system was composed of fish tanks with intensively reared sturgeon and one extensive pond stocked with common carp in polyculture. The water from intensive fish production was discharged into the fish pond, to serve as a nutrient source for primary production in the pond. Obtained data revealed that applied manipulations enhanced microorganism development and pond productivity. The results of the research show that applied moderate, nature-based upgrade in aquaculture system may allow for more efficient and cost-effective treatment of wastewater from intensive aquaculture.

Recent advances in the analytical strategies of microbial biosensor for detection of pollutants

Microbial biosensor which integrates different types of microorganisms, such as bacteria, microalgae, fungi, and virus have become suitable technologies to address limitations of conventional analytical methods. The main applications of biosensors include the detection of environmental pollutants, pathogenic bacteria and compounds related to illness, and food quality. Each type of microorganisms possesses advantages and disadvantages with different mechanisms to detect the analytes of interest. Furthermore, there is an increasing trend in genetic modifications for the development of microbial biosensors due to potential for high-throughput analysis and portability. Many review articles have discussed the applications of microbial biosensor, but many of them focusing only about bacterial-based biosensor although other microbes also possess many advantages. Additionally, reviews on the applications of all microbes as biosensor especially viral and microbial fuel cell biosensors are also still limited. Therefore, this review summarizes all the current applications of bacterial-, microalgal-, fungal-, viral-based biosensor in regard to environmental, food, and medical-related applications. The underlying mechanism of each microbes to detect the analytes are also discussed. Additionally, microbial fuel cell biosensors which have great potential in the future are also discussed. Although many advantageous microbial-based biosensors have been discovered, other areas such as forensic detection, early detection of bacteria or virus species that can lead to pandemics, and others still need further investigation. With that said, microbial-based biosensors have promising potential for vast applications where the biosensing performance of various microorganisms are presented in this review along with future perspectives to resolve problems related on microbial biosensors.

Nitrogen recovery from wastewater by microbial assimilation - A review

The increased nitrogen (N) input with low utilization rate in artificial N management has led to massive reactive N (Nr) flows, putting the Earth in a high-risk state. It is essential to recover and recycle Nr during or after Nr removal from wastewater to reduce N input while simultaneously mitigate Nr pollution in addressing the N stress. However, mechanisms for efficient Nr recovery during or after Nr removal remain unclear. Here, the occurrence of N risk and progress in wastewater treatment in recent years as well as challenges of the current technologies for N recovery from wastewater were reviewed. Through analyzing N conversion fluxes in biogeochemical N-cycling networks, microbial N assimilation through photosynthetic and heterotrophic microorganisms was highlighted as promising alternative for synergistic N removal and recovery in wastewater treatment. In addition, the prospects and gaps of Nr recovery from wastewater through microbial assimilation are discussed.

In-situ removal of aquaculture waste nutrient using floating permeable nutrient uptake system (FPNUS) under mixotrophic microalgal scheme

The current study investigated the in-situ aquaculture nutrient removal from fish tanks using mixotrophic Scenedesmus in a floating permeable nutrient uptake system (FPNUS) and compared with nutrient concentration in control, autotrophy, and bacterial nitrogen removal (BNR) treatments. In the first run, results were not as expected due to the missing PO₄^--P as the mixotrophic growth in flasks with PO₄^--P was 55.86% more than growth in aquaculture wastewater. With PO₄^--P addition in FPNUS, average and maximum removal rates under mixotrophy reached 2.53 and 10.96 mg/(L·d), respectively. The average mixotrophic removal rate was 40.31 and 81.42% higher than removal rates under autotrophy and BNR. Daily nutrient loading and removal were matched only in mixotrophy after fourth day of culture. These results show the great potential for nutrient removal using mixotrophic microalgae-based FPNUS due to its high efficiency, capability of in-situ treatment and nutrient recycling through biomass utilization.

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

Capabilities and mechanisms of microalgae on nutrients and florfenicol removing from marine aquaculture wastewater

The regulations governing the discharge of marine aquaculture wastewater are becoming increasingly stringent, and the problems of nitrogen and phosphorus pollution and antibiotic residues in wastewater are serious. Microalgae-based treatment with the dual benefits of wastewater purification and microalgae resource recycling was regarded as the most promising technology in aquaculture wastewater treatment. Isochrysis galbana and Chlorella sp. were chosen to investigate antibiotic and nutrient removal mechanisms from aquaculture wastewater. FLO addition stimulated microalgae growth at low FLO concentrations (0.1 and 1 mg/L) but inhibited growth at 10 mg/L. The removal efficiency of DIN by Chlorella sp. and I. galbana after 7 days of cultivation was 66.4% and 25.8%, respectively. Linear curves were obtained between DIN concentration and cultivation duration, remove constant (k) increased as FLO concentration increased from 0 to 10 mg/L, and the highest value of k was obtained in both the Chlorella sp. and I. galbana groups at 10 mg/L. DIP concentrations in FLO-contained simulated aquaculture wastewater decreased sharply with the cultivation of Chlorella sp. and I. galbana, and DIP removal rate increased as FLO concentration increased. When the initial concentration of FLO was 0.1 mg/L, biodegradation by I. galbana accounted for 86.67% of FLO removal. In contrast, FLO removal with biodegradation and biosorption by Chlorella sp. was 89.74% and 3.72%, respectively. Furthermore, Chlorella sp. grown in MPBR demonstrated superior capability for antibiotic-containing marine aquaculture wastewater purification, with average removal rates of DIN and DIP of 81.2% and 100%, respectively. The high removal rate is related to membranes which can improve microalgae performance by decoupling SRT and HRT. For microalgae-based aquaculture wastewater, ammonia was the most crucial nitrogen source, followed by nitrate. These findings serve as a theoretical foundation for developing microalgae-based aquaculture wastewater treatment technology and eliminating antibiotics in aquaculture.

Enhancing microalgal lipid accumulation for biofuel production

Microalgae have high lipid accumulation capacity, high growth rate and high photosynthetic efficiency which are considered as one of the most promising alternative sustainable feedstocks for producing lipid-based biofuels. However, commercialization feasibility of microalgal biofuel production is still conditioned to the high production cost. Enhancement of lipid accumulation in microalgae play a significant role in boosting the economics of biofuel production based on microalgal lipid. The major challenge of enhancing microalgal lipid accumulation lies in overcoming the trade-off between microalgal cell growth and lipid accumulation. Substantial approaches including genetic modifications of microalgal strains by metabolic engineering and process regulations of microalgae cultivation by integrating multiple optimization strategies widely applied in industrial microbiology have been investigated. In the present review, we critically discuss recent trends in the application of multiple molecular strategies to construct high performance microalgal strains by metabolic engineering and synergistic strategies of process optimization and stress operation to enhance microalgal lipid accumulation for biofuel production. Additionally, this review aims to emphasize the opportunities and challenges regarding scaled application of the strategic integration and its viability to make microalgal biofuel production a commercial reality in the near future.

Growth Performance and Biochemical Composition of Waste-Isolated Microalgae Consortia Grown on Nano-Filtered Pig Slurry and Cheese Whey under Mixotrophic Conditions

The cultivation mode plays a vital role in algal growth and composition. This paper assessed the growth ability of twelve algae–microbial consortia (ACs) originally selected from organic wastes when nano-filtered pig slurry wastewater (NFP) and cheese whey (CW) were used as growth substrates in a mixotrophic mode in comparison with a photoautotrophic mode. Nutrient uptake ability, biochemical composition, fatty acids, and amino acid profiles of ACs were compared between both cultivation conditions. On average, 47% higher growth rates and 35% higher N uptake were found in mixotrophic cultivation along with significant P and TOC removal rates. Changing the cultivation mode did not affect AA and FA composition but improved EAA content, providing the potential for AC_5 and AC_4 to be used as local protein feed supplements. The results also showed the possibility for AC_6 and AC_1 to be used as omega-3 supplements due to their low ω-6–ω-3 ratio.

Assessment of CO2 biofixation and bioenergy potential of microalga Gonium pectorale through its biomass pyrolysis, and elucidation of pyrolysis reaction via kinetics modeling and artificial neural network

This study investigates CO2 biofixation and pyrolytic kinetics of microalga G. pectorale using model-fitting and model-free methods. Microalga was grown in two different media. The highest rate of CO2 fixation (0.130 g/L/day) was observed at a CO2 concentration of 2%. The pyrokinetics of the biomass was performed by a thermogravimetric analyzer (TGA). Thermogravimetric (TG) and derivative thermogravimetric (DTG) curves at 5, 10 and 20°C/min indicated the presence of multiple peaks in the active pyrolysis zones. The activation energy was calculated by different model-free methods such as Friedman, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Popescu. The obtained activation energy which are 61.7–287 kJ/mol using Friedman, 40.6–262 kJ/mol using FWO, 35–262 kJ/mol using KAS, and 66.4–255 kJ/mol using Popescu showed good agreement with the experimental values with higher than 0.96 determination coefficient (R2). Moreover, it was found that the most probable reaction mechanism for G. pectorale pyrolysis was a third-order function. Furthermore, the multilayer perceptron-based artificial neural network (MLP-ANN) regression model of the 4-10-1 architecture demonstrated excellent agreement with the experimental values of the thermal decomposition of the G. pectoral. Therefore, the study suggests that the MLP-ANN regression model could be utilized to predict thermogravimetric parameters.

Performance and mechanism of Chlorella in swine wastewater treatment: Roles of nitrogen-phosphorus ratio adjustment and indigenous bacteria

The effects of adjusting the nitrogen-phosphorus (N/P) ratio of wastewater and indigenous bacteria on swine wastewater treatment by Chlorella sp. HL were investigated. The optimal N/P ratio of Chlorella in swine wastewater was 20 by adjusting the phosphorus concentration. The participation of indigenous bacteria increased total extracellular polymeric substances content, which was beneficial to maintain the stability of the algal-bacterial consortium, and improved the algal density and the removal rate of total nitrogen, total phosphorus, and chemical oxygen demand by 47.8%, 24.0%, 30.7%, and 326.7%, respectively. Proteobacteria was the dominant phylum with the relative abundance of 71.58% in the algal-bacterial system at optimal N/P ratio, and Brevundimonas, Chryseobacterium, and Pseudomonas played positive roles in the establishment of symbiotic systems at the genus level. These results provide a theoretical basis for the construction of an efficient algal-bacterial symbiotic system in swine wastewater treatment and support for commercial scale-up.

A review on biodiesel production from microalgae: Influencing parameters and recent advanced technologies

Microalgae are the important part of carbon cycle in the nature, and they could utilize the carbon resource in water and soil efficiently. The abilities of microalgae to mitigate CO₂ emission and produce oil with a high productivity have been proven. Hence, this third-generation biodiesel should be popularized. This review firstly introduce the basic characteristics and application fields of microalgae. Then, the influencing parameters and recent advanced technologies for the microalgae biodiesel production have been discussed. In influencing parameters for biodiesel production section, the factors of microalgae cultivation, lipid accumulation, microalgae harvesting, and lipid extraction have been summarized. In recent advanced technologies for biodiesel production section, the microalgae cultivation systems, lipid induction technologies, microalgae harvesting technologies, and lipid extraction technologies have been reviewed. This review aims to provide useful information to help future development of efficient and commercially viable technology for microalgae-based biodiesel production.

Granular indigenous microalgal-bacterial consortium for wastewater treatment: Establishment strategy, functional microorganism, nutrient removal, and influencing factor

Granular indigenous microalgal-bacterial consortium (G-IMBC) system integrates the advantages of the MBC and granular activated sludge technologies, also with superior microalgal wastewater adaptation capacity. In this review, the concept of IMBC was firstly described, followed by its establishment and acclimation strategies. Characteristics and advantages of G-IMBC system compared to other IMBC systems (i.e., attached and floc IMBC systems) were then introduced. Moreover, the involved functional microorganisms and their interactions, as well as nutrient removal mechanisms were systematically and critically reviewed. Finally, the influencing factors including wastewater characteristics and operation factors were discussed. This study aims to provide a comprehensive up-to-date summary of the G-IMBC system for sustainable wastewater treatment.

Promoting effect of plant hormone gibberellin on co-metabolism of sulfamethoxazole by microalgae Chlorella pyrenoidosa

In this study, sodium acetate (NaAC) as a co-substrate effectively promoted the metabolism of sulfamethoxazole (SMX) by microalgae Chlorella pyrenoidosa. In the cultivation supplied with 5.0 and 10.0 g L^-1 NaAC, 51.1% and 61.2% SMX was removed, respectively. On this basis, the improvement effect of plant hormone gibberellin (GA₃) on SMX removal by 5 g L^-1 NaAC supplied as co-substrate was further investigated. The results showed that biodegradation played decisive role in the removal of SMX. As a plant hormone, GA₃ effectively improved the co-metabolic removal efficiency of SMX by C. pyrenoidosa. Especially when GA₃ dosage reached 10.0 and 50.0 mg L^-1, C. pyrenoidosa showed a very high SMX removal rate of 83.5% and 95.3%, respectively. Transcriptome analysis showed that GA₃ promoted the removal of SMX by C. pyrenoidosa was the result of the combined action of exogenous and endogenous plant hormones.

Effect of pH on biomass production and carbohydrate accumulation of Chlorella vulgaris JSC-6 under autotrophic, mixotrophic, and photoheterotrophic cultivation

Microalgal biomass, known as the third generation feedstock for biofuels production, is currently being explored mainly for lipids and functional components. However, the potential of microalgal carbohydrates has not been evaluated. In this investigation, Chlorella vulgaris JSC-6 was used for carbohydrates production from CO₂ and fatty acids under different cultivation strategies to meet the requirements of a CO₂-neutral and clean fermentation system for biofuel production. Autotrophic cultivation resulted in better carbon assimilation and carbohydrate accumulation; about 1.4 g CO₂ could be converted to 1 g biomass, of which 50% are carbohydrates. Assimilation of fatty acids in photoheterotrophic and mixotrophic modes was influenced by pH, and pH 7-7.5 supported butyrate and acetate assimilation. The maximum carbohydrate content (49.86%) was attained in mixotrophic mode, and the ratio of the simple sugars glucose-xylose-arabinose was 1:0.11:0.02. The higher glucose content makes the microalgal biomass a suitable feedstock for sugar-based fermentations.

Evaluation of the effects of input variables on the growth of two microalgae classes during wastewater treatment

Wastewater treatment carried out by microalgae is usually affected by the type of algal strain and the combination of cultivation parameters provided during the process. Every microalga strain has a different tolerance level towards cultivation parameters, including temperature, pH, light intensity, CO2 content, initial inoculum level, pretreatment method, reactor type and nutrient concentration in wastewater. Therefore, it is vital to supply the right combination of cultivation parameters to increase the wastewater treatment efficiency and biomass productivity of different microalgae classes. In the current investigation, the decision tree was used to analyse the dataset of class Trebouxiophyceae and Chlorophyceae. Various combinations of cultivation parameters were determined to enhance their performance in wastewater treatment. Nine combinations of cultivation parameters leading to high biomass production and eleven combinations each for high nitrogen removal efficiency and high phosphorus removal efficiency for class Trebouxiophyceae were detected by decision tree models. Similarly, eleven combinations for high biomass production, nine for high nitrogen removal efficiency, and eight for high phosphorus removal efficiency were detected for class Chlorophyceae. The results obtained through decision tree analysis can provide the optimum conditions of cultivation parameters, saving time in designing new experiments for treating wastewater at a large scale.

Microalgae-based livestock wastewater treatment (MbWT) as a circular bioeconomy approach: Enhancement of biomass productivity, pollutant removal and high-value compound production

The intensive livestock activities that are carried out worldwide to feed the growing human population have led to significant environmental problems, such as soil degradation, surface and groundwater pollution. Livestock wastewater (LW) contains high loads of organic matter, nitrogen (N) and phosphorus (P). These compounds can promote cultural eutrophication of water bodies and pose environmental and human hazards. Therefore, humanity faces an enormous challenge to adequately treat LW and avoid the overexploitation of natural resources. This can be accomplished through circular bioeconomy approaches, which aim to achieve sustainable production using biological resources, such as LW, as feedstock. Circular bioeconomy uses innovative processes to produce biomaterials and bioenergy, while lowering the consumption of virgin resources. Microalgae-based wastewater treatment (MbWT) has recently received special attention due to its low energy demand, the robust capacity of microalgae to grow under different environmental conditions and the possibility to recover and transform wastewater nutrients into highly valuable bioactive compounds. Some of the high-value products that may be obtained through MbWT are biomass and pigments for human food and animal feed, nutraceuticals, biofuels, polyunsaturated fatty acids, carotenoids, phycobiliproteins and fertilizers. This article reviews recent advances in MbWT of LW (including swine, cattle and poultry wastewater). Additionally, the most significant factors affecting nutrient removal and biomass productivity in MbWT are addressed, including: (1) microbiological aspects, such as the microalgae strain used for MbWT and the interactions between microbial populations; (2) physical parameters, such as temperature, light intensity and photoperiods; and (3) chemical parameters, such as the C/N ratio, pH and the presence of inhibitory compounds. Finally, different strategies to enhance nutrient removal and biomass productivity, such as acclimation, UV mutagenesis and multiple microalgae culture stages (including monocultures and multicultures) are discussed.

Effective bioremediation of tobacco wastewater by microalgae at acidic pH for synergistic biomass and lipid accumulation

Tobacco wastewater is too difficult to decontaminate which poses a significant environmental problem due to the harmful and toxic components. Chlorella pyrenoidosa is a typical microalgal species with potential in removal of organic/inorganic pollutants and proves to be an ideal algal-based system for wastewater treatment. However, the strategy of tobacco related wastewater treatment using microalgae is in urgent need of development. In this study, C. pyrenoidosa was used to evaluate the removal efficiency of artificial tobacco wastewater. Under various solid-to-liquid (g/L) ratios, 1:1 ratio and acidic pH 5.0 were optimal for C. pyrenoidosa to grow with high performance of removal capacity to toxic pollutants (such as COD, NH3-N, nicotine, nitrosamines and heavy metals) with the alleviation of oxidative damage. Algal biomass could reach up to 540.24 mg/L. Furthermore, carbon flux of C. pyrenoidosa was reallocated from carbohydrate and protein biosynthesis to lipogenesis with a high lipid content of 268.60 mg/L at pH 5.0. Overall, this study demonstrates an efficient and sustainable strategy for tobacco wastewater treatment at acidic pH with the production of valuable microalgal products, which provides a promising biorefinery strategy for microalgal-based wastewater bioremediation.

Improving sedimentation and lipid production of microalgae in the photobioreactor using saline wastewater

Saline wastewater was used in this study to culture freshwater microalgae Chlorella pyrenoidosa in sequencing batch photobioreactor to improve the sedimentation and lipid production of algal cells. Influent salinity of 0.5% or above effectively promoted the sedimentation of microalgae in the settling stage of photobioreactor, and greatly reduced the algal biomass in effluent. The mechanism of the saline wastewater in improving the sedimentation of microalgae included decreasing zeta potential, increasing cell particle size and promoting extracellular polymeric substances synthesis, which varied with influent salinity. Saline wastewater also promoted the lipid accumulation in microalgae. Lipid content of microalgae increased with increasing influent salinity. However, the growth of microalgae was greatly inhibited at the influent salinity of 2.0% and 3.0%. Therefore, the PBR with influent salinity of 1.0% achieved the highest productivity of microalgae lipid. The saturation of fatty acids of microalgae gradually increased with increasing influent salinity.

Use of reverse osmosis reject from drinking water plant for microalgal biomass production

The present study evaluates the use of reverse osmosis (RO) reject, termed as ROR, for microalgal biomass production. The supplementation of ROR from two different sources, namely domestic RO unit (ROR1) and commercial-scale RO plant (ROR2), showed a synergistic effect on the growth and biochemical composition of Chlorella pyrenoidosa. Among the tested ROR1 doses, the highest biomass production (1.27±0.06 g L^-1) was observed with 25% ROR1 supplemented growth media. In contrast, the lipid content (28.85±3.13% of TS) in C. pyrenoidosa at 50% ROR1 dose was almost twice that in BG11 (positive control). Interestingly, the microalgae showed relatively higher biomass production (1.37±0.07 g L^-1) and higher lipid content (33.23±3.92% of TS) when 50% ROR2 was used in growth media. At the same time, the estimated carbohydrate and protein contents were 28.41±0.73 and 29.75±0.31% of TS, respectively. Furthermore, the lipid productivity (28.98±2.79 mg L^-1 d^-1) was relatively higher than the nutrient media (12.35±1.34 mg L^-1 d^-1). The present findings revealed that the RO reject from drinking water purifiers can efficiently be utilized for lipid-rich microalgal biomass production. Hence, the dependency on freshwater resources for mass scale microalgae cultivation through recycling of RO reject can be reduced.

Resourceful treatment of harsh high-nitrogen rare earth element tailings (REEs) wastewater by carbonate activated Chlorococcum sp. microalgae

The discharge of rare earth element (REE) tailings wastewater results in serious ecological deterioration and health risk, due to high ammonia nitrogen, and strong acidity. The low C/N ratio makes it recalcitrant to biodegradation. Recently it has been shown that microalgal technology has a promising potential for the simultaneous harsh wastewater treatment and resource recovery. However, the low nitrogen removal rate and less biomass of microalgae restricted its development. In this work, Chlorococcum sp. was successfully isolated from the rare earth mine effluent. The microalgae was capable of enhancing nitrogen contaminants removal from REEs wastewater due to the carbonate addition, which simulated the activity increase of carbonic anhydrase (CA). The total inorganic nitrogen (TIN) removal rate reached 4.45 mg/L h^-1, which compared to other microalgal species, the nitrogen removal rate and biomass yield were 7.8- and 4.9-fold higher, respectively. Notably, high lipid contents (mainly triglycerides, 43.85% of dry weight) and a high biomass yield were obtained. Meanwhile, the microalgae had an excellent settleability attributed to higher extracellular polymeric substance (EPS) formation, leading to easier resource harvest. These results were further confirmed in a continuous-flow photobioreactor with a stable operation for more than 30 days, indicating its potential for application.

A comprehensive review on carbon source effect of microalgae lipid accumulation for biofuel production

Energy is a major driving force for the economic development. Due to the scarcity of fossil fuels and negative impact on the environment, it is important to develop renewable and sustainable energy sources for humankind. Microalgae as the primary feedstock for biodiesel has shown great application potential. However, lipid yield from microalgae is limited by the upstream cost, which restrain the realization of large-scale biofuel production. The modification of lipid-rich microalgae cell has become the focus over the last few decades to improve the lipid content and productivity of microalgae. Carbon is a vital nutrient that regulates the growth and metabolism of microalgae. Different carbon sources are assimilated by microalgae cells via different pathways. Inorganic carbon sources are mainly used through the CO₂-concentrating mechanisms (CCMs), while organic carbon sources are absorbed by microalgae mainly through the Pentose Phosphate (PPP) Pathway and the Embden-Meyerhof-Pranas (EMP) pathway. Therefore, the addition of carbon source has a significant impact on the production of microalgae biomass and lipid accumulation. In this paper, mechanisms of lipid synthesis and carbon uptake of microalgae were introduced, and the effects of different carbon conditions (types, concentrations, and addition methods) on lipid accumulation in microalgal biomass production and biodiesel production were comprehensively discussed. This review also highlights the recent advances in microalgae lipid cultivation with large-scale commercialization and the development prospects of biodiesel production. Current challenges and constructive suggestions are proposed on cost-benefit concerns in large-scale production of microalgae biodiesel.

Constructed microalgal-bacterial symbiotic (MBS) system: Classification, performance, partnerships and perspectives

The microalgal-bacterial symbiotic (MBS) system shows great advantages in the synchronous implementation of wastewater treatment and nutrient recovery. To enhance the understanding of different MBS systems, this review summarizes reported MBS systems and proposes three patterns according to the living state of microalgae and bacteria. They are free microalgal-bacterial (FMB) system, attached microalgal-bacterial (AMB) system and bioflocculated microalgal-bacterial (BMB) system. Compared with the other two patterns, BMB system shows the advantages of microalgal biomass harvesting and application. To further understand the microalgal-bacterial partnerships in the bioflocculation of BMB system, this review discusses bioflocs characteristics, extracellular polymeric substances (EPS) properties and production, and the effect of microalgae/bacteria ratio and microalgal strains on the formation of bioflocculation. Microalgal biomass production and application are important for BMB system development in the future. Food processing wastewater characterized by high biodegradability and low toxicity should be conducive for microalgal cultivation. In addition, exogenous addition of functional bacteria for nutrient removal and bioflocculation formation would be a crucial research direction to facilitate the large-scale application of BMB system.

Anaerobic digestate as a low-cost nutrient source for sustainable microalgae cultivation: A way forward through waste valorization approach

To suffice the escalating global energy demand, microalgae are deemed as high potential surrogate feedstocks for liquid fuels. The major encumbrance for the commercialization of microalgae cultivation is due to the high costs of nutrients such as carbon, phosphorous, and nitrogen. Meanwhile, the organic-rich anaerobic digestate which is difficult to be purified by conventional techniques is appropriate to be used as a low-cost nutrient source for the economic viability and sustainability of microalgae production. This option is also beneficial in terms of reutilize the organic fraction of solid waste instead of discarded as zero-value waste. Anaerobic digestate is the side product of biogas production during anaerobic digestion process, where optimum nutrients are needed to satisfy the physiological needs to grow microalgae. Besides, the turbidity, competing biological contaminants, ammonia and metal toxicity of the digestate are also potentially contributing to the inhibition of microalgae growth. Thus, this review is aimed to explicate the feasibility of utilizing the anaerobic digestate to cultivate microalgae by evaluating their potential challenges and solutions. The proposed potential solutions (digestate dilution and pre-treatment, microalgae strain selection, extra organics addition, nitrification and desulfurization) corresponding to the state-of-the-art challenges are applicable as future directions of the research.

Effects of sulfate ions on growth and lipid synthesis of Scenedesmus obliquus in synthetic wastewater with various carbon-to-nitrogen ratios altered by different ammonium and nitrate additions

Producing biodiesel from microalgae is a promising strategy to upgrade energy structure. In this study, effects of sulfate (SO₄^2-) on lipid synthesis of Scenedesmus obliquus (S. obliquus) cultivated in synthetic wastewater with different carbon to nitrogen (C/N) ratios regulated by ammonium (NH₄⁺-N) and nitrate (NO₃^--N), separately, were investigated. The results shown that SO₄^2- could dramatically increase cell growth preferring to NH₄⁺-N supply. And SO₄^2- addition could improve its carbon and nitrogen utilization potential for boosting lipid productivity leading α-linolenic acid (C18:3n3) to occupy a dominant component (38.96%) in NH₄⁺-N group at a C/N ratio of 7.5. Additionally, SO₄^2- could enhance the enrichment and expression of up-regulated genes annotated in key enzymes such as GK, GNPAT, CRLS, plc and DEGS involved in glycerolipid, glycerophospholipid and sphingolipid metabolic pathways, resulting in carbon metabolism enhancement and sulfatide accumulation. This study brings a comprehensive view towards nutritional regulation of lipid synthesis in microalgae.

Improved lipid productivity of Scenedesmus obliquus with high nutrient removal efficiency by mixotrophic cultivation in actual municipal wastewater

This study was aimed to assess the growth and lipid productivity improvement of a green microalga Scenedesmus obliquus by mixotrophic cultivation, via addition of sodium acetate (NaAc) into actual municipal wastewater (AMW). Moreover, the nutrient removal efficiency of the culture media in terms of carbon, nitrogen, and phosphorus was investigated. The results showed that the S. obliquus grew better in the AMW than in the BG11 medium (0.20 g L^-1 vs 0.16 g L^-1 in dry cell weight), and the final algal lipid productivity was higher (9.02 mg L^-1 d^-1 vs 7.75 mg L^-1 d^-1, P < 0.05). Further, the addition of NaAc significantly stimulated the algal growth and lipid productivity. Specifically, the highest improvement was obtained by the NaAc-addition of 1 g L^-1, where the algal dry cell weight increased 2.40 times than that in the AMW with little organic carbon (0.48 mg L^-1 vs 0.20 mg L^-1, P < 0.01), and the corresponding algal lipid productivity increased 2.44 time (22.08 mg L^-1 d^-1 vs 9.02 mg L^-1 d^-1, P < 0.01). Meanwhile, the addition of 1 g L^-1 of NaAc significantly increased the microalga-driven nitrogen and phosphorus removal efficiency, respectively by 1.75 and 2.23 times (82.20% vs 46.85% for total nitrogen, and 76.35% vs 34.18% for total phosphorus). In summary, this study confirmed the feasibility of using organic carbon-supplemented AMW to replace the artificial media for microalgae-based lipid production and nutrient recycling.

Optimising nutrients in the culture medium of Rhodosporidium toruloides enhances lipids production

Rhodosporidium toruloides is a useful oleaginous yeast, but lipids production is affected by various factors including nutrients in the culture medium. Herein, the R-ZL2 high-yield mutant strain was used to investigate the effects of different carbon sources (sucrose, glucose, xylose), nitrogen sources (ammonium sulphate, ammonium nitrate), and C/N ratio on lipids production capacity, get the following conclusion (1) Compared with glucose and xylose, sucrose was a superior carbon source for lipids production; (2) When using ammonium sulphate as the nitrogen source, a C/N ratio of 200:1 achieved the highest biomass, lipids production and lipids content (10.7 g/L, 6.32 g/L and 59%, respectively), and lipids produced under different C/N conditions have potential for biodiesel production (except for C/N = 40 and C/N = 80); (3) When using ammonium nitrate as the nitrogen source, a C/N ratio of 200:1 achieved the highest biomass, lipids production and lipids content (12.1 g/L, 8.25 g/L and 65%, respectively), and lipids produced under different C/N ratio conditions have potential for biodiesel production. Thus, a combination of sucrose and ammonium nitrate was optimal for the lipid accumulation in R-ZL2. The findings will lay a foundation for further improving lipids yields.

Effect of Different Influent Conditions on Biomass Production and Nutrient Removal by Aeration Microalgae Membrane Bioreactor (ICFB-MMBR) System for Mariculture Wastewater Treatment

The nutrient removal and biomass production of the internal circulating fluidized bed microalgae membrane bioreactor (ICFB-MMBR) was studied under different cultivation modes, influent TOC, influent pH, and influent N/P. Platymonas helgolandica tsingtaoensis was used as the biological source. The growth of P. helgolandica tsingtaoensis and the removal efficiency of pollutants in the mixotrophy culture mode were improved compared with other culture modes. With the increased influent TOC, the average growth rate of P. helgolandica tsingtaoensis increased, and ammonia nitrogen and total phosphorus removal rate were improved. The P. helgolandica tsingtaoensis growth rate and nutrient removal efficiencies at the influent pH of 8 were the best among the different influent pH values. As the influent N/P ratio increased from 5 to 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate increased gradually. When the influent N/P ratio was higher than 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate tended to be stable and did not significantly change with the increase of influent N/P ratio. At the proper influent conditions, the high P. helgolandica tsingtaoensis biomass and nutrient removal efficiency could be obtained in the microalgae membrane bioreactor, which could provide a theoretical basis for the application of the system for wastewater treatment.