Facile synthesis of porous carbons from silica-rich rice husk char for volatile organic compounds (VOCs) sorption

Advances in sustainable production and applications of nano-biochar

Biochar is a carbonaceous material that can be amplified into nano-biochar (N-BC) using different physicochemical techniques. Contrary to bulk biochar, nano-biochar, and have better physicochemical characteristics, including a large specific surface area, pore properties, distinctive nanostructure, and high catalytic activity. The spotlight of this review is to contribute up-to-date information on the scaling up of biochar into nano-biochar through various sustainable techniques. This review paper is a compilation of research on nano-biochar from biochar including preparation, distinctive characteristics, and intended applications in the environmental and agricultural sectors, along with some other cutting-edge applications, which are all covered in detail in this review paper and also provides the knowledge gap that will be useful for future investigation and development.

Waste from the food industry: Innovations in biorefineries for sustainable use of resources and generation of value

Biorefineries have attracted significant attention from the scientific community and various industrial sectors due to their use of unconventional biomass sources to produce biofuels and other value-added compounds. Various agro-industrial residues can be applied in biorefinery systems, making them economically and environmentally attractive. However, the cost, efficiency, and profitability of the process are directly affected by the choice of biomass, pre-treatments, and desired products. In biorefineries, the simultaneous production of different products during processing is a valuable approach. Chemical, physical, biological, or combined treatments can generate numerous compounds of high commercial interest, such as phenolic compounds. These treatments, in addition to modifying the biomass structure, are essential for the process's viability. Over the years, complex treatments with high costs and environmental impacts have been simplified and improved, becoming more specific in generating high-value resources as secondary outputs to the main process (generally related to the release of sugars from lignocelluloses to produce second-generation ethanol). Innovative methods involving microorganisms and enzymes are the most promising in terms of efficiency and lower environmental impact. Biorefineries enable the use of varied raw materials, such as different agro-industrial residues, allowing for more efficient resource utilization and reducing dependence on non-renewable sources. In addition to producing low-carbon biofuels, biorefineries generate a variety of high-value by-products, such as packaging materials, pharmaceuticals, and nutritional ingredients. This not only increases the profitability of biorefineries but also contributes to a circular economy.

Hierarchical porous carbon nanofibrous membranes with elaborated chemical surfaces for efficient adsorptive removal of volatile organic compounds from air

Volatile organic compounds (VOCs) in the air pose great health risks to humans and the environment. Adsorptive separation technology has proven effective in mitigating VOC pollution, with the adsorbent being the critical component. Therefore, the development of highly efficient adsorbent materials is crucial. Carbon nanofibers, known for their physical-chemical stability and rapid adsorption kinetics, are promising candidates for removing VOCs from the air. However, the relatively simple porous structures and inert surface chemical properties of traditional carbon nanofibers present challenges in further enhancing their application performance further. Herein, a hierarchical porous carbon nanofibrous membrane was prepared using electrospinning technology and a one-step carbonization & activation method. Phenolic resin and polyacrylonitrile were used as co-precursors, with silica nanoparticles serving as the dopant. The resulting membrane exhibited a specific surface area of up to 1560.83 m2/g and surfaces rich in functional O-/N- groups. With a synergistic effect of developed micro- and meso-pores and active chemical surfaces, the carbon nanofibrous membrane demonstrated excellent adsorption separation performance for various VOCs, with comparable adsorption capacities and fast kinetics. Moreover, the membrane displayed remarkable reusability and dynamic adsorption performance for different VOCs, indicating its potential for practical applications.

Agri-food waste biosorbents for volatile organic compounds removal from air and industrial gases - A review

Approximately 1.3 billion metric tons of agricultural and food waste is produced annually, highlighting the need for appropriate processing and management strategies. This paper provides an exhaustive overview of the utilization of agri-food waste as a biosorbents for the elimination of volatile organic compounds (VOCs) from gaseous streams. The review paper underscores the critical role of waste management in the context of a circular economy, wherein waste is not viewed as a final product, but rather as a valuable resource for innovative processes. This perspective is consistent with the principles of resource efficiency and sustainability. Various types of waste have been described as effective biosorbents, and methods for biosorbents preparation have been discussed, including thermal treatment, surface activation, and doping with nitrogen, phosphorus, and sulfur atoms. This review further investigates the applications of these biosorbents in adsorbing VOCs from gaseous streams and elucidates the primary mechanisms governing the adsorption process. Additionally, this study sheds light on methods of biosorbents regeneration, which is a key aspect of practical applications. The paper concludes with a critical commentary and discussion of future perspectives in this field, emphasizing the need for more research and innovation in waste management to fully realize the potential of a circular economy. This review serves as a valuable resource for researchers and practitioners interested in the potential use of agri-food waste biosorbents for VOCs removal, marking a significant first step toward considering these aspects together.

Enhanced surfactant remediation of diesel-contaminated soil using O3 nanobubbles

Currently, nanobubbles are widely discussed in environmental research due to their unique properties, including significant specific surface area, transfer efficiency, and free radical generation. In this study, O2 and O3 nanobubbles (diameters ranging from 0 to 500 nm) were combined with conventional surfactant technology to investigate their enhanced efficacy in removing diesel contaminants from soil. The impact of various factors such as surfactant concentration, temperature, and soil aging duration on pollutant removal rates was examined across different experimental approaches (stirring/flushing). Soil samples subjected to different treatments were characterized using TG-DTG and FTIR analysis, while GC/MS was employed to assess the degradation products of diesel constituents in the soil. The results indicated that the elution efficiencies of the three surfactants (SDS, SDBS, and TX-100) for diesel in soil correlated positively with concentration (0.3-1.4 CMC) and temperature (18-60 °C), and inversely with aging time (10-300 days), with the elution capacity was SDS > SDBS > TX-100. Mechanical stirring (500 rpm) and temperature variations (18-60 °C) did not affect the stability of the nanobubbles. Upon the introduction of O3 nanobubbles to the surfactant solution, there was a consistent increase in both the removal (degraded and removed) efficiency and rate of diesel under varying experimental conditions, resulting in an enhancement of removal rates by approximately 8-15%. FTIR spectroscopy showed that surfactants containing O3 nanobubbles mitigated the impact on the primary functional groups of soil organic matter. GC/MS analyses indicated that residual pollutants were predominantly alkanes, with degradation difficulty ranking as: alkanes < alkenes < cycloalkanes < aromatic compounds. TG-DTG coupled with GC/MS analysis demonstrated that O3 nanobubbles contributed to a reduction in surfactant residues. This study significantly advances our understanding of how nanobubbles facilitate and optimize surfactant-assisted remediation of contaminated soil, thereby advancing the precise application of nanobubble technology in soil remediation.

Performance and mechanism of benzene adsorption on ZnCl2 one-step modified corn cob biochar

Utilizing cost-effective corn cob, zinc chloride-modified biochar was synthesized through one-step method for benzene adsorption from air. Study on impregnation ratio impact showed optimal benzene adsorption at ZnCl2:CC ratio of 1.5:1, with capacity reaching 170.53 mg g-1. Characterization using BET, SEM, FTIR, and XPS was conducted. BET results indicated specific surface area of Zn1.5BC at 1260.63 m2 g-1 and maximum pore volume of 0.546 m3 g-1. SEM analysis revealed microporous-mesoporous structure in Zn1.5BC, marking significant improvement over original biomass. DFT pore size distribution and FTIR analysis suggested post-modification dehydration and elimination reactions, leading to volatile compound release, functional group reduction, and pore widening. XPS analysis showed decrease in O = C-OH content with increased impregnation ratio, enhancing biochar's π-π electron diffusion for benzene. Langmuir isotherm and pseudo-second-order kinetic models effectively described experimental data, indicating multilayer benzene adsorption on biochar controlled by complex physicochemical adsorption and pore diffusion. Adsorption condition assessment, including adsorption temperature (20-120 ℃) and benzene concentration in inlet phase (159.73-383.36 mg L-1), was performed. Yoon-Nelson model fitting indicated adsorption site loss at higher temperatures and reduced capture ability due to increased adsorbate molecule kinetic energy. Higher adsorbate concentrations aided adsorption molecule diffusion to biochar surface and internal pores, increasing adsorption rate and shortening equilibrium time. Overall, zinc chloride-modified biochar facilitates benzene adsorption through pore filling and π-π interactions, with pore filling as primary mechanism. Produced biochar shows excellent regeneration properties and reusability.

Bifunctional Cu-incorporated carbon nanospheres via in-situ complexation strategy as efficient toluene adsorbents and antibacterial agents

Carbon adsorbents have been widely used to remove indoor volatile organic compounds (VOCs), however, the proliferation of bacteria on the carbon adsorbents may deteriorate the indoor air quality and thus pose a serious threat to human health. Herein, we report the synthesis of antibacterial porous carbon spheres (carbonized aminophenol-formaldehyde resin, CAF) with well-dispersed Cu species via an in situ incorporation of Cu2+ during the polymerization of 3-aminophenol-formaldehyde resin followed by a thermal carbonization and reduction process. Compared with CAF, the Cu/CAF-x nanocomposites with Cu loading show a much higher specific surface area (>700 m2 g-1vs. 569 m2 g-1 for CAF). In addition, the pore size of Cu/CAF-x is ranging from 0.7 to 1.68 nm, which is exactly conducive to adsorb the toluene molecules. As a result, the toluene adsorption capacity is improved from 123.50 mg g-1 for CAF to >170 mg g-1 for Cu/CAF-x. More importantly, such adsorbents possess excellent antibacterial performance, the Cu/CAF-10 (10 wt% of Cu loading) with a concentration of 50 μg mL-1 can completely kill the E. coli within 30 min. Our work paves the way to the development of bifunctional adsorbents with both efficient VOCs adsorption and excellent antibacterial performance.

Biomass based biochar production approaches and its applications in wastewater treatment, machine learning and microbial sensors

Biochar is a stable carbonaceous material derived from various biomass and can be utilized as adsorbents, catalysts and precursors in various environmental applications. This review discusses various feedstock materials and methods of biochar production via traditional as well as modern approaches. Additionally, the biochar characteristics, HTC process, and its modification by employing steam and gas purging, acidic, basic / alkaline and organo-solvent, electro- and magnetic fields have been discussed. The recent biochar applications for real water, wastewater and industrial wastewater for the abstraction of environmental contaminants also reviewed. Moreover, applications in machine learning and microbial sensors were discussed. In the meantime, analyses on commercial and environmental profit, current ecological concerns and the future directions of biochar application have been well presented.

Adsorption and mechanism study for phenol removal by 10% CO2 activated bio-char after acid or alkali pretreatment

The development of an efficient bio-char used to remove phenol from wastewater holds great importance for environmental protection. In this work, wheat straw bio-char (BC) was acid-washed by HF and activated at 900 °C with 10% CO2 to obtain bio-char (B-Ⅲ-0.1D900). Adsorption experiments revealed that B-Ⅲ-0.1D900 achieved a remarkable phenol removal efficiency of 90% within 40 min. Despite its relatively low specific surface area of 492.60 m2/g, it exhibited a high maximum adsorption capacity of 471.16 mg/g. Furthermore, B-Ⅲ-0.1D900 demonstrated a good regeneration capacity for at least three cycles (90.71%, 87.54%, 84.36%). It has been discovered that HF washing, which removes AAEM and exposes unsaturated functional groups, constitutes one of the essential prerequisites for enhancing CO2 activation efficiency at high temperatures. After 10% CO2 activation, the mesoporous structure exhibited substantial development, facilitating enhanced phenol infiltration into the pores when compared to untreated BC. The increased branching of the bio-char culminated in a more complete aromatic system, which enhances the π-π forces between the bio-char and the phenol. The presence of tertiary alcohol structure enhances the hydrogen bonding forces, thereby promoting intermolecular multilayer adsorption of phenol. With the combination of various forces, B-Ⅲ-0.1D900 has a good removal capacity for phenol. This work provides valuable insights into the adsorption of organic pollutants using activated bio-char.

Improvement of the specific surface area of biochar by calcium-precipitated nanoparticles synthesized by microbial induction as a template skeleton: Removal mechanism of tetracycline in water

The template method is an effective means to improve the specific surface area and porosity of biochar, but the synthesis of template agents and the way they are integrated with biomass materials still need further development. Therefore, the free Pseudomonas sp. Y1 was used to synthesize calcium-precipitated nanoparticles (CPN) on sludge as a fused template skeleton to enlarge the surface area of sludge biochar facilitating the adsorption of tetracycline (TC) in this work. The modified biochar (FBC) showed excellent specific surface area (448.55 m2 g-1) and porosity (0.0053 cm³ g-1), stable morphological structure, abundant active functional groups, and appreciable adsorption capacity (65.43 mg g-1) based on several characterization and adsorption experiments. Moreover, the adsorption model postulated that the removal of TC is mainly a chemisorption-based heat-trapping, disordered multilayer interaction. In detail, this process involved the joint contribution from electrostatic interactions, ligand exchange, hydrogen bonding, π-π bonding, complexation, and pore filling. Meanwhile, the adaptability and stability of FBC were examined by pH and coexisting substances. This template skeleton induced by microorganisms can provide new insight into the modification of biochar with the template method.

PCDD/F adsorption enhancement over nitrogen-doped biochar: A DFT-D study

Polychlorinated dibenzo-p-dioxin/furans (PCDD/F) have a great threat to the environment and human health, resulting in controlling PCDD/F emissions to regulation far important for emission source. Considering 2,3,4,7,8-pentachlorodibenzo-p-furan (PeCDF) identified as the most contributor to international toxic equivalent, 2,3,4,7,8-PeCDF can be considered as the target molecule for the adsorption of PCDD/F emission from industries. With the aim to in-depth elucidate how different types of nitrogen (N) species enhance 2,3,4,7,8-PeCDF on the biochar and guide the specific carbon materials design for industries, systematic computational investigations by density functional theory calculations were conducted. The results indicate pristine biochar intrinsically interacts with 2,3,4,7,8-PeCDF by π-π electron donor and acceptor (EDA) interaction, six-membered carbon rings of PeCDF parallel to the biochar surface as the strongest adsorption configuration. Moreover, by comparison of adsorption energy (-150.16 kJ mol-1) and interaction distance (3.593 Å) of pristine biochar, environment friendly N doping can enhance the adsorption of 2,3,4,7,8-PeCDF on biochar. Compared with graphitic N doping and pyridinic N doping, pyrrolic N doping biochar presents the strongest interaction toward 2,3,4,7,8-PeCDF molecule due to the highest adsorption energy (-155.56 kJ mol-1) and shortest interaction distance (3.532 Å). Specially, the enhancing adsorption of PeCDF over N doped biochar attributes to the enhancing π-π electron EDA interaction and electrostatic interaction. In addition, the effect of N doping species on PeCDF adsorbed on the biochar is more than that of N doping content. Specially, the adsorption capacity of N doping biochar for PCDD/F can be improved by adding pyrrolic N group most efficiently. Furthermore, pyrrolic N and pyridinic N doping result in the entropy increase, and electrons transform from pyrrolic N and pyridinic N doped biochar to 2,3,4,7,8-PeCDF molecule. A complete understanding of the research would supply crucial information for applying N-doped biochar to effectively remove PCDD/F for industries.

Designing novel perlite-Fe3O4@SiO2@8-HQ-5-SA as a promising magnetic nanoadsorbent for competitive adsorption of multicomponent VOCs

Volatile organic compounds (VOCs), which emerge as multicomponent pollutants through many industrial processes, pose a serious threat to human health and the eco-environment due to their volatility, toxicity and dispersion. Hence, the study of competitive adsorption of multicomponent VOCs is of practical and scientific importance. Herein, the perlite-supported Fe3O4@SiO2@8-hydroxyquinoline-5-sulfonic acid (perlite-Fe3O4@SiO2@8-HQ-5-SA) was designed as a novel magnetic nanoadsorbent by a simple strategy and employed for the competitive adsorption of multicomponent toluene, ethylbenzene and xylene in the vapor-phase targeted as VOCs. The successfully prepared perlite-Fe3O4@SiO2@8-HQ-5-SA was characterized by means of SEM, EDX, FT-IR, VSM and BET analyses. Adsorption capacities of 558 mg/g, 680 mg/g and 716 mg/g were achieved for single component toluene, ethylbenzene and xylene, respectively. It was concluded that the adsorption capacities for both binary and ternary components were significantly decreased compared to single component adsorption. The competitive adsorption capacity order of the binary and ternary component VOCs was xylene > ethylbenzene > toluene due to their competitive dominance. The rate-limiting kinetic analysis indicated that the adsorption rates were determined by both the film diffusion and intraparticle diffusion. The analysis of the error metrics demonstrated that the three-parameter isotherm models better described the adsorption data compared to the two-parameter models. In particular, the Toth model provided the closest fit to the experimental equilibrium data. The thermodynamic analysis indicated the spontaneous nature and probability (ΔG° <0), exothermic (ΔH° <0), physical (ΔH° <20 kJ/mol) and a declination in the degree of randomness (ΔS° <0) of the adsorption processes. The reuse efficiency of perlite-Fe3O4@SiO2@8-HQ-5-SA for toluene, ethylbenzene and xylene decreased to only by 88.91%, 88.07% and 87.16% after five recycles. The perlite-Fe3O4@SiO2@8-HQ-5-SA has a significant adsorptive potential compared to other adsorbents reported in the literature, thus it could be recommended as a promising nanoadsorbent for VOCs in industrial processes.

Synthesis of Porous Activated Carbon Doped with Tetramethylammonium Hydroxide: Evaluation of Excellent Gasoline Vapor Adsorption Performance and Activation Mechanism

The rapid urbanization and industrialization in China have led to an urgent dilemma for controlling urban air pollution, including the intensified emission of gasoline vapor into the atmosphere. Herein, we selected highland barley straw as a raw material and KOH and tetramethylammonium hydroxide (TMAOH) as activators to synthesize nitrogen-doped layered porous carbon (K-thAC) by a three-step activation method. The obtained K-thAC materials had a high specific surface area, reaching 3119 m2/g. Dynamic adsorption experiments demonstrated a superior adsorption capacity of up to 501 mg/g (K-thAC-25) for gasoline vapor compared with other documented carbon adsorbents. Moreover, adjusting the ratio of raw materials with a series of active ingredients could further improve the pore properties of the obtained K-thACs and their adsorption performance for gasoline vapor. Furthermore, the K-thAC materials were also characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), synchronous thermogravimetry (STA), X-ray powder diffraction (XRD), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption tests. This study synthesized a novel plant-based material to treat gasoline vapor pollution efficiently.

Nano-biochar: recent progress, challenges, and opportunities for sustainable environmental remediation

Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.

Customized oxygen-rich biochar with ultrahigh microporosity for ideal solid phase microextraction of substituted benzenes

The synergistic effect of high microporosity and abundant heteroatoms is important for improving the performance of biochar in various fields. However, it is still challenging to create enough micropores for biochar, while simultaneously retaining the heteroatoms from biomass. A series of biochar with variable microstructures was successfully prepared by carbonization and following ball milling on lotus pedicel (LP), watermelon rind (WR), and litchi rind (LR). The pore structures and heteroatoms of biochar were characterized in detail. Notably, high microporosity could be realized by the carbonization of LR, and further ball milling resulted in a higher microporous surface area (1323.4 m²·g^-1) and richer oxygen. Furthermore, the obtained biochar was fabricated as solid phase microextraction (SPME) coatings with uniform morphologies and similar thicknesses to deeply investigate the relationships between the microstructures and extraction performance. The best performance was demonstrated by the LR800BM, with enrichment factors from 1780 to 155,217. Finally, it was coupled with gas chromatography-mass spectrometry (GC-MS) to develop an analytical method with a wide linear range (1-50,000 ng·L^-1), low limits of detection (0.10-1.4 ng·L^-1), good repeatability (0.83 %-7.5 %) and reproducibility (4.2 %-8.9 %). This work provides valuable insights into the structure-performance relationship of biochar, which is important for the design of high-performance biochar-based adsorbents and their applications in the environment.

Carbon Nanostructures-Silica Aerogel Composites for Adsorption of Organic Pollutants

Silica aerogels are a class of materials that can be tailored in terms of their final properties and surface chemistry. They can be synthesized with specific features to be used as adsorbents, resulting in improved performance for wastewater pollutants' removal. The purpose of this research was to investigate the effect of amino functionalization and the addition of carbon nanostructures to silica aerogels made from methyltrimethoxysilane (MTMS) on their removal capacities for various contaminants in aqueous solutions. The MTMS-based aerogels successfully removed various organic compounds and drugs, achieving adsorption capacities of 170 mg⋅g^-1 for toluene and 200 mg⋅g^-1 for xylene. For initial concentrations up to 50 mg⋅L^-1, removals greater than 71% were obtained for amoxicillin, and superior to 96% for naproxen. The addition of a co-precursor containing amine groups and/or carbon nanomaterials was proven to be a valuable tool in the development of new adsorbents by altering the aerogels' properties and enhancing their adsorption capacities. Therefore, this work demonstrates the potential of these materials as an alternative to industrial sorbents due to their high and fast removal efficiency, less than 60 min for the organic compounds, towards different types of pollutants.

Recent Advances in Sensing Materials Targeting Clinical Volatile Organic Compound (VOC) Biomarkers: A Review

In general, volatile organic compounds (VOCs) have a high vapor pressure at room temperature (RT). It has been reported that all humans generate unique VOC profiles in their exhaled breath which can be utilized as biomarkers to diagnose disease conditions. The VOCs available in exhaled human breath are the products of metabolic activity in the body and, therefore, any changes in its control level can be utilized to diagnose specific diseases. More than 1000 VOCs have been identified in exhaled human breath along with the respiratory droplets which provide rich information on overall health conditions. This provides great potential as a biomarker for a disease that can be sampled non-invasively from exhaled breath with breath biopsy. However, it is still a great challenge to develop a quick responsive, highly selective, and sensitive VOC-sensing system. The VOC sensors are usually coated with various sensing materials to achieve target-specific detection and real-time monitoring of the VOC molecules in the exhaled breath. These VOC-sensing materials have been the subject of huge interest and extensive research has been done in developing various sensing tools based on electrochemical, chemoresistive, and optical methods. The target-sensitive material with excellent sensing performance and capturing of the VOC molecules can be achieved by optimizing the materials, methods, and its thickness. This review paper extensively provides a detailed literature survey on various non-biological VOC-sensing materials including metal oxides, polymers, composites, and other novel materials. Furthermore, this review provides the associated limitations of each material and a summary table comparing the performance of various sensing materials to give a better insight to the readers.

Production of Activated Biochar Derived from Residual Biomass for Adsorption of Volatile Organic Compounds

Volatile organic compounds (VOCs) released in air represent a major potential for environmental pollution. Capture methods based on activated biochar have attracted attention because of their low cost and for the high removal capacity of the material due to its physical and chemical properties. In this paper, activated biochars were developed and their adsorption performance for VOC capture was evaluated. In the first step, biochars derived from rapeseed cake (RSC) and walnut shells (WSC) were obtained through a carbonization process and then were activated using basic/acid agents (KOH/H₂SO₄) to increase their performance as adsorbents. Acetone and toluene were used as the VOC templates. The adsorption capacities of toluene and acetone for non-activated biochars were reduced (26.65 mg/g), while that of activated biochars increased quite significantly, up to 166.72 mg/g, and the biochars activated with H₂SO₄ presented a higher adsorption capacity of VOCs than the biochars activated with KOH. The higher adsorption capacity of biochars activated with H₂SO₄ can be attributed to their large surface area, and also to their larger pore volume. This activated biochar adsorbent could be used with good results to equip air purification filters to capture and remove VOCs.

Characterization of molecular dissolved organic matter removed by modified eucalyptus-based biochar and disinfection by-product formation potential using Orbitrap mass spectrometric analysis

Biochar is an alternative adsorbent, with similar characteristics to activated carbon, that can be applied to water treatment to remove dissolved organic matter (DOM) as disinfection by-product (DBP) precursors with comparable efficiency and better cost-effectiveness and sustainability relative to commercial alternatives. We applied non-targeted analysis with Orbitrap mass spectrometry to investigate changes in molecular DOM and DBP formation after treating DOM-containing water with biochar. Two surface water sources, Phong River (PR) in Khon Kaen, Thailand and Suwannee river (SR), USA, were tested using three types of eucalyptus-derived biochar (i.e., KOH-modified, calcined, and both) were selected as adsorbents and compared to commercial coconut-based activated carbon (ccAC). The results showed that calcination increased the surface area, pore volume, and functional groups of biochar responsible for adsorption. The calcined biochar achieved higher DOC removal efficiencies for both rivers than other adsorbents. PR contains more adsorbable DOM as over 800 molecules with carbon, hydrogen, and oxygen (CHO) features that were decreased or totally removed by all adsorbents. In contrast, for SR treatment, KOH-modified and calcined biochar was found to decrease over 800 CHO features, compared to around 500 and 400 CHO features for calcined biochar and ccAC, respectively. However, numerous background CHO features with reduced character (i.e., low degree of oxidation) were found after water treatment by calcined biochar, resulting in higher DBP formation after chlorination compared to the other adsorbents. The results of this study have important implications for future preparation of biochar for water treatment.

Facile synthesis of magnesium-based metal-organic framework with tailored nanostructure for effective volatile organic compounds adsorption

A novel Mg(II) metal-organic framework (Mg-MOF) was synthesized based on the ligand of 2,2'-bipyridine-4,4'-dicarboxylic acid. Single-crystal X-ray structural analysis confirmed that three-dimensional-nanostructure Mg-MOFs formed a monoclinic system with a channel size of 15.733 Å × 23.736 Å. N₂ adsorption isotherm, Fourier transform infrared spectroscopy, thermogravimetric analysis and high-resolution transmission electron microscopy were performed to characterize the thermal stability and purity of the Mg-MOFs. The adsorption studies on four typical volatile organic compounds (VOCs) emitted during wood drying showed that Mg-MOFs have noteworthy adsorption capacities, especially for benzene and β-pinene with adsorptions of 182.26 mg g^-1 and 144.42 mg g^-1, respectively. In addition, the adsorption of Mg-MOFs mainly occurred via natural adsorption, specifically, multi-layer physical adsorption, accompanied by chemical forces, which occurred in the pores where the VOCs molecules combined with active sites. As an adsorbent, Mg-MOFs exhibit versatile behaviour for toxic gas accumulation.

Modification of activated carbon using urea to enhance the adsorption of dioxins

Activated carbon is commonly used to remove dioxins from flue gas via adsorption. Improving the targeted adsorption capacity of activated carbon for dioxins can reduce the consumption of adsorbents and help achieve emission standards for target pollutants. Here, commercial coal-based activated carbon was used as a raw material and modified by urea impregnation along with treatment at high temperature under a nitrogen atmosphere. It was found that modification with urea effectively improved the pore structure of activated carbon while incorporating a certain amount of nitrogen. The best modification effect was achieved at a modification temperature of 600 °C, an impregnation ratio of urea to activated carbon of 1:1, and with high-temperature treatment for 2 h. The mesopore volume of the modified activated carbon (AC600) reached 0.38 cm³/g, accounting for 57.58% of the total pore volume. With an impregnation ratio of urea to activated carbon of 1:1, high-temperature treatment for 2 h, and a modification temperature of 800 °C, a certain amount of nitrogen was introduced into the carbon rings to form a modified activated carbon (AC800) rich in pyridine and pyrrole groups (atomic percentage = 4.84%). The activated carbon modified by urea and the unmodified activated carbon were subsequently selected for dioxin adsorption experiments using a dioxin generation and adsorption system. AC600 showed the highest adsorption efficiency for dioxins, reaching 97.65%, based on toxicity equivalents. Although AC800 has poor pore properties, it has more pyridine and pyrrole groups than AC600. Consequently, the efficiency of AC800 at adsorbing low-concentration dioxins reached 85.24% based on toxicity equivalents. Overall, this study describes two mechanisms for effectively modifying activated carbon with urea based on (1) optimizing the pore structure of activated carbon and (2) incorporating nitrogen.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

Utilization of porous carbon synthesized with textile wastes via calcium acetate template for tetracycline removal: The role of template agent and the formation mechanism

A porous carbon obtained from cotton/polyester textile wastes was synthesized by the calcium acetate template method. This research studied the effect of preparation conditions and evaluated the characterization of porous carbon, and further explored its formation mechanism. The porous carbon possessed a high specific surface area of 1106.63 m²/g under an optimum condition (pyrolysis temperature = 800 °C, mass ratio of CA: CPW = 1.5:1, pyrolysis time = 1.5 h). It was found that calcium acetate played the role of catalyst to promote the degradation of cotton/polyester textile. CaCO₃ and CaO fabricated by calcium acetate acted as the template to generate a mesoporous structure. The generated CO₂ etched carbon skeleton to create a large number of micropores. Besides, it was supported as the carbon source to fuse with carbon structures, further consolidating the aromatic structures of porous carbon. The optimized porous carbon has a high adsorption capacity of 506.40 mg/g for tetracycline. And the adsorption data fitted better by the first-pseudo-order model and Langmuir isotherms with an endothermic and spontaneous adsorption process. The cotton/polyester-based porous carbon was a promising economical material for tetracycline.

Development of food-origin biochars for the adsorption of selected volatile organic compounds (VOCs) for environmental matrices

Four novel fruit-derived biochars were developed: pomegranate peels (PB), prickly pear peels (PPB), carob (CB), and locust bean gum (LBGB). The feedstocks were pyrolyzed at 350 and 550 ℃ (under N₂), respectively, and characterized using Scanning Electron Microscopy (SEM), Elemental Analysis (EA), Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Brunauer-Emmett-Teller (B.E.T) analysis, and Thermogravimetric analysis (TGA). A systematic and comprehensive comparison for the adsorption of selected volatile organic compounds (VOCs) by biochar was established. Cresol, dimethyl trisulfide (DMTS), hexane, and benzene were examined as a function of contact time (30-480 min), mass (0.1-1 g), concentration levels (50-1000 ppb_v), efficiency, and reusability, using the headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) method. PB 550 ℃ revealed a specific surface area of 8.3 m² g^-1, the fastest complete removal, an ideal mass of 1 g, 3-times reuse, and ∼ 99% removal of 500 ppb_v benzene, cresol, DMTS, and 100 ppb_v hexane.

Efficient toluene adsorption/desorption on biochar derived from in situ acid-treated sugarcane bagasse

Carbon-based materials with great adsorption performance are of importance to meet the needs of industrial gas adsorption. Having massive agricultural wastes of sugarcane bagasse, China could use this waste into wealth. However, the comprehensive utilization of sugarcane bagasse as precursor for biochar that can be used as adsorbent has not been extensively explored. In this study, a series of in situ sulfuric acid-modified biochar was prepared by hydrothermal carbonization process. The prepared biochar (SBAC-7) has a combination of two main advantages that are high microporosity (micropore surface area = 1106 m2/g) and being rich in S-containing functional groups on the surface. In particular, SBAC-7 showed an excellent adsorption capacity of toluene (771.1 mg/g) at 30 °C, which is nearly 3 times as high as that of the commercial activated carbons. Meanwhile, it showed great stability and cyclic regeneration performance with five toluene adsorption-desorption test cycles. This study provides a high-performance biochar for the adsorption-desorption cycle in practical engineering applications, and would contribute to the sustainable "sugarcane production-bagasse utilization" circular economy.

Hierarchical porous biochar from plant-based biomass through selectively removing lignin carbon from biochar for enhanced removal of toluene

This study proposed a simple and green air oxidation (AO) method to prepare hierarchical porous biochar by selectively removing lignin carbon from biochar after the pyrolysis of plant-based biomass, based on the fact that the thermal decomposition temperature in air between lignin carbon and cellulose/hemicellulose carbon was different. Three kinds of biomass with different lignocellulose contents were used, including walnut shell, cypress sawdust and rice straw. The results found that AO treatment could effectively improve the pore structure of the three biochar. The specific surface area of WCO-4, CCO-4 and RCO-4 was 555.0 m²/g, 418.7 m²/g and 291.9 m²/g, respectively, which was significantly higher than those of WC (319.5 m²/g), CC (381.7 m²/g) and RC (69.6 m²/g), respectively. Among these, walnut shell biochar with air oxidation (WCO) had higher surface area of 555.0 m²/g and mesopore volume of 0.116 cm³/g, this was related to its high content of lignin, which could facilitate the formation of mesopores by AO treatment with high selectivity. The toluene adsorption capacity of WCO reached 132.9 mg/g, which increased by 223.4% from that without AO treatment. The kinetics study indicated that the diffusion rates of toluene molecule were improved due to the increased mesopores volume of biochar and micropores also play an important role in the adsorption of toluene. The results demonstrate that AO treatment is a promising method to develop hierarchical porous structure for lignocellulose-rich plant-based biomass with low cost and environmental-friendly, which greatly enhanced the toluene adsorption capacity.

Biochar and environmental sustainability: Emerging trends and techno-economic perspectives

Environmental pollutants including emerging contaminants are a growing concern worldwide. Organic wastes, such as food waste, compost, animal manure, crop residues, and sludge are generally used as feedstock. The conventional treatment methodologies (primary and secondary treatment process) do not mitigate or remove pollutants effectively. Hence, an effective, low-cost, and environmentally friendly tertiary treatment process is an urgent need. Biochar finds interesting applications in environmental processes like pollutant remediation, greenhouse gas mitigation, and wastewater treatment. Studies have shown that different types of adsorbents (biochars) like, native and engineered biochar are being used in the removal or mitigation of heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls, pesticides, disinfectants, polychlorinated dibenzofurans, and dibenzo-p-dioxins from contaminated sites for environmental management. The review discusses ample studieswhich can offer solutions for environmental sustenance and managementand the emerging trends and techno-economic prospectives of biochar for sustainable environmental management.

Straw-Based Activated Carbon: Optimization of the Preparation Procedure and Performance of Volatile Organic Compounds Adsorption

Straw is one of the largest agricultural biowastes and a potential alternative precursor of activated carbon. Activated carbon prepared from different types of straw have great differences in structure and adsorption performance. In order to explore the performance of different straw-based activated carbon in volatile organic compounds adsorption, five common straws were selected as potential source materials for the preparation of SAC. The straw-based activated carbons were prepared and characterized via a thermo-gravimetric analysis, scanning electron microscope and the Brunauer–Emmett–Teller method. Among the five straw-based activated carbons, millet straw-derived activated carbon exhibited superior properties in S_BET, S_mic and adsorption capacities of both toluene and ethyl acetate. Furthermore, the preparation process of millet straw activated carbon was optimized via response surface methodology, using carbonization temperature, carbonization time and impregnation ratio as variables and toluene adsorption capacity, ethyl acetate adsorption capacity and activated carbon yield as responses. The optimal preparation conditions include a carbonization temperature of 572 °C, carbonization time of 1.56 h and impregnation ratio (ZnCl₂/PM, w/w) of 1.60, which was verified experimentally, resulting in millet straw activated carbon with a toluene adsorption capacity of 321.9 mg/g and ethyl acetate adsorption capacity of 240.4 mg/g. Meanwhile, the adsorption isothermals and regeneration performance of millet straw activated carbon prepared under the optimized conditions were evaluated. The descriptive ability of the isothermals via the Redlich–Peterson equation suggests a heterogeneous surface on millet straw activated carbon. Recyclability testing has shown that millet straw activated carbon maintained a stable adsorption capacity throughout the second to fifth cycles. The results of this work indicate that millet straw activated carbon may be a potential volatile organic compound adsorbent for industrial application.

Rhododendron and Japanese Knotweed: invasive species as innovative crops for second generation biofuels for the ionoSolv process

We investigated the potential of two terrestrial biomass invasive species in the United-Kingdom as lignocellulosic biofuel feedstocks: Japanese Knotweed (Fallopia japonica) and Rhododendron (Rhododendron ponticum). We demonstrate that a pretreatment technique using a low-cost protic ionic liquid, the ionoSolv process, can be used for such types of plant species considered as waste, to allow their integration into a biorefinery. N,N,N-Dimethylbutylammonium hydrogen sulfate ([DMBA][HSO₄]) was able to fractionate the biomass into a cellulose-rich pulp and a lignin stream at high temperatures (150–170 °C) and short reaction times (15–60 minutes). More than 70–80% of the subsequent cellulose was hydrolysed into fermentable sugars, which were fermented into the renewable energy vector bioethanol.

Japanese Knotweed (Fallopia japonica) and Rhododendron (Rhododendron ponticum), two invasive species in the UK that are an environmental threat and economic burden, can be integrated into a flexible ionic liquid based biorefinery process to produce bioenergy and chemicals.

From typical silicon-rich biomass to porous carbon-zeolite composite: A sustainable approach for efficient adsorption of CO2

Focusing on the high-valued utilization of the widespread silicon-rich waste biomass, a sustainable route by simultaneous utilization of carbon and silicon from silicon-rich rice husk was proposed in this work. Specifically, porous carbon-zeolite composite with hierarchical porous structure of micro/meso pores (carbon) and ultra-microporous pores (Na-X zeolite) was in situ prepared by a facile one-pot method. The obtained porous carbon-zeolite composite (PC₂-Z) had a higher yield of 67.66% compared to the porous carbon without silicon (PC₂) of 43.33%. Moreover, due to the high ultra-micropore volume of the PC₂-Z sample (up to 0.181 cm³/g), it exhibited high dynamic CO₂ adsorption capacity of 1.81 mmol/g and CO₂/N₂ selectivity of 9.80 (1 bar), which were higher than 1.67 mmol/g and 7.01 (1 bar) for PC₂, respectively. PC₂-Z also showed good regeneration efficiency above 99% after ten cycles. Furthermore, the economic and energy consumption assessment of this utilization route was conducted. Overall, a facile one-pot route was developed to prepare highly efficient composite absorbents from silicon-rich biomass, which can be widely used in different environmental applications.

Nitrogen-doped porous biochar derived from marine algae for efficient solid-phase microextraction of chlorobenzenes from aqueous solution

Nitrogen-doped porous biochar (NPB) with a large specific surface area, wide pore size distribution, graphitized structure, nitrogen doping, and hydrophobicity was fabricated by high-temperature modification of algal biochar with potassium carbonate. This NPB was then uniformly coated on stainless steel wire as a novel solid-phase microextraction (SPME) fiber. The extraction efficiency of NPB-coated fiber for seven chlorobenzenes (CBs) was excellent; it was 1.0-112.2 times higher than that of commercial SPME fibers. A trace determination method was developed for seven CBs in water with the optimized extraction conditions by NPB-coated fiber and gas chromatography-electron capture detector, which showed wide linear ranges (1-1000 ng L^-1), low detection limits (0.007-0.079 ng L^-1), great repeatability (2.5-6.5% for intra-day, and 3.1-6.8% for inter-day), and excellent reproducibility (3.5-6.3%, n = 5). The practicality of the developed method was evaluated using real water samples and showed great recoveries (89.55-105.19%). This study showed that low-cost biomass wastes could be converted to advanced biochar materials by a facile method, and displayed excellent performance in SPME applications.

Air oxidation coupling NH3 treatment of biomass derived hierarchical porous biochar for enhanced toluene removal

In this study, hierarchical porous biochar was prepared from poplar sawdust by air oxidation coupling with NH₃ treatment for the removal of toluene. The results showed that the mesopore volume of the sample with air oxidation (PS‒O₂) increased significantly to 0.263 cm³/g from the blank sample (PS, 0.053 cm³/g). This could be attributed to the selective removal of the lignin carbon by air oxidation to develop mesopores in biochar. Following further NH₃ treatment (PS‒O₂‒NH₃), the basic surface chemistry on biochar was improved due to increased basic N-containing groups and decreased acidic O-containing groups, together with the micropore volume also increased to 0.231 cm³/g from 0.186 cm³/g of PS‒O₂. The formation mechanism of hierarchical porous structure of biochar was also discussed. The adsorption capacity of PS‒O₂‒NH₃ for toluene reached 218.4 mg/g at the initial concentration of 820 mg/m³, which was 383.2% higher than that of PS. The adsorption isotherm study indicated that the adsorption process of toluene was monolayered and the maximal adsorption capacity of PS‒O₂‒NH₃ for toluene could reach as high as 476.2 mg/g. The results demonstrated that air oxidation coupling NH₃ treatment is a highly effective method for the preparation of hierarchical porous biochar for enhancing toluene adsorption performance.

Fabrication and characterization of 3,4-diaminobenzophenone-functionalized magnetic nanoadsorbent with enhanced VOC adsorption and desorption capacity

The present study, for the first time, utilized 3,4-diaminobenzophenone (DABP)-functionalized Fe₃O₄/AC@SiO₂ (Fe₃O₄/AC@SiO₂@DABP) magnetic nanoparticles (MNPs) synthesized as a nanoadsorbent for enhancing adsorption and desorption capacity of gaseous benzene and toluene as volatile organic compounds (VOCs). The Fe₃O₄/AC@SiO₂@DABP MNPs used in adsorption and desorption of benzene and toluene were synthesized by the co-precipitation and sol-gel methods. The synthesized MNPs were characterized by SEM, FTIR, TGA/DTA, and BET surface area analysis. Moreover, the optimization of the process parameters, namely contact time, initial VOC concentration, and temperature, was performed by applying response surface methodology (RSM). Adsorption results demonstrated that the Fe₃O₄/AC@SiO₂@DABP MNPs had excellent adsorption capacity. The maximum adsorption capacities for benzene and toluene were found as 530.99 and 666.00 mg/g, respectively, under optimum process parameters (contact time 55.47 min, initial benzene concentration 17.57 ppm, and temperature 29.09 °C; and contact time 57.54 min, initial toluene concentration 17.83 ppm, and temperature 27.93 °C for benzene and toluene, respectively). In addition to the distinctive adsorptive behavior, the Fe₃O₄/AC@SiO₂@DABP MNPs exhibited a high reproducibility adsorption and desorption capacity. After the fifth adsorption and desorption cycles, the Fe₃O₄/AC@SiO₂@DABP MNPs retained 94.4% and 95.4% of its initial adsorption capacity for benzene and toluene, respectively. Kinetic and isotherm findings suggested that the adsorption mechanisms of benzene and toluene on the Fe₃O₄/AC@SiO₂@DABP MNPs were physical processes. The results indicated that the successfully synthesized Fe₃O₄/AC@SiO₂@DABP MNPs can be applied as an attractive, highly effective, reusable, and cost-effective adsorbent for the adsorption of VOC pollutants.Graphical abstract.

Biochars as media for air pollution control systems: Contaminant removal, applications and future research directions

Biochars are low-cost and renewable biomaterials with several applications, including soil amendment, mitigation of greenhouse gas emissions, and removal of both inorganic and organic contaminants in aqueous systems. An increasing body of recent evidence indicates that biochars can also remove gaseous chemical contaminants, such as those occurring in industrial flue gases. However, unlike other applications such as in agroecosystems, soil amendments, and aquatic systems, comprehensive reviews on biochar applications in the field of air pollution control are still lacking. The current paper examined existing evidence to understand the nature of contaminants, particularly the gaseous ones, potential applications, constraints, and future research needs pertaining to biochar applications in air pollution control. The preparation of biochars and their functionalized derivatives, and the properties influencing their capacity to remove gaseous contaminants are summarized. The removal capacity and mechanisms of various organic and inorganic gaseous contaminants by biochars are discussed. Evidence shows that biochars effectively remove metal vapours, particularly elemental mercury (Hg⁰), acidic gases (H₂S, SO₂, CO₂), ozone, nitrogen oxides (NO_x), and organic contaminants including aromatic compounds, volatile organic compounds, and odorous substances. The mechanisms for the removal of gaseous contaminants, including; adsorption, precipitation, and size exclusion were presented. Potential industrial application domains include remediation of gaseous emissions from incinerators, waste-to-energy systems, kilns, biomass and coal-fired boilers/cookers, cremation, smelters, wastewater treatment, and agricultural production systems including livestock husbandry. These industrial applications, coupled with the renewable, low-cost and sustainable nature of biochars, point to opportunities to further develop and scale up the biochar technology in the air pollution control industry. However, the biochar-based air filter technology still faces several challenges, largely stemming from constraints and several knowledge gaps, which were highlighted. Hence, further research is required to address these constraints and knowledge gaps before the benefits of the biochar-based air filters are realized.

Hydrochar and pyrochar for sorption of pollutants in wastewater and exhaust gas: A critical review

Pollutants in wastewater and exhaust gas bring out serious concerns to public health and the environment. Biochar can be developed as a sustainable adsorbent originating from abundant bio-wastes, such as agricultural waste, forestry residue, food waste and human waste. Here we highlight the state-of-the-art research progress on pyrochar and hydrochar for the sorption of pollutants (heavy metal, organics, gas, etc) in wastewater and exhaust gases. The adsorption performance of pyrochar and hydrochar are compared and discussed in-depth, including preparation procedures (carbonization and activation), sorption possible mechanisms, and physiochemical properties. Challenges and perspective for designing efficient and environmental benign biochar-based adsorbents are finally addressed.

Simultaneously enhanced removal and stepwise recovery of atrazine and Pb(II) from water using β-cyclodextrin functionalized cellulose: Characterization, adsorptive performance and mechanism exploration

Heavy metals and pesticides often coexist in contaminated water, while their potential competition behaviors make the adsorptive removal more challenging. Thus, decorating an adsorbent with independent functional sites could be a promising alternative to radically prevent the competitive process for improving the adsorption performance. Herein, β-cyclodextrin functionalized rice husk-based cellulose (β-CD@RH-C) was designed and applied for synchronous removal of atrazine and Pb(II). The characterization results supported the successful grafting of β-cyclodextrin onto the cellulose. The β-CD@RH-C presented a pH-dependent adsorption performance for Pb(II) with a theoretical monolayer adsorption capacity of 283.00 mg/g, while was mostly unrelated to pH for atrazine adsorption with a heterogeneous uptake of 162.21 mg/g in the mono-component system. Most importantly, the β-CD@RH-C could efficiently achieve simultaneous removal of atrazine and Pb(II) via avoiding their competitive behaviors, which was due to the different adsorption mechanisms for atrazine (i.e. host-guest interaction) and Pb(II) (i.e. complexation and electrostatic interaction). Moreover, the adsorbed atrazine and Pb(II) could be sequentially desorbed with slight decrease in the adsorption performance of β-CD@RH-C even after four cycles in the atrazine-Pb(II) multi-component system. All these results suggested β-CD@RH-C to be a tailored adsorbent with high-performance elimination of co-existing heavy metals and organic pollutants in water.

Mitigation of Gaseous Emissions from Swine Manure with the Surficial Application of Biochars

Environmental impact associated with odor and gaseous emissions from animal manure is one of the challenges for communities, farmers, and regulatory agencies. Microbe-based manure additives treatments are marketed and used by farmers for mitigation of emissions. However, their performance is difficult to assess objectively. Thus, comprehensive, practical, and low-cost treatments are still in demand. We have been advancing such treatments based on physicochemical principles. The objective of this research was to test the effect of the surficial application of a thin layer (¼ inches; 6.3 mm) of biochar on the mitigation of gaseous emissions (as the percent reduction, % R) from swine manure. Two types of biochar were tested: highly alkaline and porous (HAP) biochar made from corn stover and red oak (RO), both with different pH and morphology. Three 30-day trials were conducted with a layer of HAP and RO (2.0 & 1.65 kg∙m−2, respectively) applied on manure surface, and emissions of ammonia (NH3), hydrogen sulfide (H2S), greenhouse gases (GHG), and odorous volatile organic compounds (VOCs) were measured. The manure and biochar type and properties had an impact on the mitigation effect and its duration. RO significantly reduced NH3 (19–39%) and p-cresol (66–78%). H2S was mitigated (16~23%), but not significantly for all trials. The phenolic VOCs had relatively high % R in most trials but not significantly for all trials. HAP reduced NH3 (4~21%) and H2S (2~22%), but not significantly for all trials. Significant % R for p-cresol (91~97%) and skatole (74~95%) were observed for all trials. The % R for phenol and indole ranged from (60~99%) and (29~94%) but was not significant for all trials. The impact on GHGs, isobutyric acid, and the odor was mixed with some mitigation and generation effects. However, larger-scale experiments are needed to understand how biochar properties and the dose and frequency of application can be optimized to mitigate odor and gaseous emissions from swine manure. The lessons learned can also be applicable to surficial biochar treatment of gaseous emissions from other waste and area sources.

A facile synthesis of nitrogen-doped porous carbons from lignocellulose and protein wastes for VOCs sorption

This paper reported a sustainable method for preparation of N-doped porous carbon from co-hydrothermal carbonization (co-HTC) of lignocellulose (as a carbon skeleton) and sludge protein (as a nitrogen dopant). The HTC pretreatment could improve the yield of porous carbon. Although a low mass ratio (1:1) of biochar and KOH was employed, large specific surface areas of the porous carbons could be achieved. The porous carbon from rice husk (RH) by the HTC (260 °C) combined with the KOH activation (750 °C) had a largest BET surface area up to 1396.5 m²/g. Meanwhile, its adsorption capacity on toluene could reach 394.2 mg/g. It was attributed to its large specific surface area and hierachical porous structure with higher meso-porosity. The porous carbons with N-doping also improved the adsorption capacity. Furthermore, thermal desorption at around 300 °C had a high potential for regeneration of the saturated porous carbons.

Surface modified and activated waste bone char for rapid and efficient VOCs adsorption

In this work, very efficient VOCs adsorbent was developed from waste bovine bone. After pyrolysis at 450 °C, the bone char was treated by H₃PO₄ for surface modification and activated by K₂CO₃ respectively. The prepared materials were characterized by N₂ adsorption isotherms, SEM, FT-IR, and XPS. Adsorption/desorption and regeneration behavior of VOCs were also studied. Results showed that H₃PO₄ modification can effectively accelerate the adsorption process and after K₂CO₃ activation, a new hierarchical pore structure was found with an ultrahigh total pore volume of 2.807 cm³/g. The specific adsorption capacity for typical VOC reached ∼13.03 mmol/g which is much higher than literature data under the same condition. Static toluene adsorption test on the prepared activated bone-char revealed that the hierarchical structure has provided abundant adsorption sites and the adsorption behavior can be well described by the pseudo-second-order model. The dynamic/static adsorption ratio increased from 70.31% to 78.62% due to less mass transfer resistance by surface modification.

Co-combustion behavior of dyeing sludge and rice husk by using TG-MS: Thermal conversion, gas evolution, and kinetic analyses

Co-combustion of dyeing sludge (DS) and rice husk (RH) is a promising energy-from-waste method. The aim of this work was to investigate and quantify the effect of RH additive on combustion performance, gas evolution (especially gaseous pollutants) and kinetics during DS combustion by thermogravimetry-mass spectrometry method. Results revealed that the introduction of RH improved the combustibility, burnout performance and combustion stability of DS. Optimal RH addition (10% RH) reduced the emission of gaseous pollutants (NH₃, NO₂, COS, SO₂ and CS₂). The interaction between DS and RH inhibited the devolatilization reaction and emission of gaseous sulfur substances, and it also restrained NO₂ emission under optimal RH additive amount. A four-interval kinetic model (D₁ → F₃ → D₁ → F₃) was established to describe the co-combustion process (R² greater than 0.9999). RH addition, especially at high doses, led to an increase in activation energy relative to DS.