Environment-enhancing process for algal wastewater treatment, heavy metal control and hydrothermal biofuel production: A critical review

Mechanistic Insights into Micelle-Enhanced Nanofiltration for Heavy Metal Removal: Transformation of Ion Transport and Fouling Phenomena

Toxic heavy metals are widely present in typical scenarios, such as mines and electroplating wastewater, presenting significant risks to biological and environmental safety. Membrane processes encounter a challenge in effectively intercepting heavy metals due to their small hydration radius. This research showcases the high efficiency of micelle-enhanced nanofiltration (MENF) in removing heavy metals. At the critical micelle concentration, sodium dodecyl sulfate demonstrated a high removal of Cu2+, Ni2+, Zn2+, and Cd2+ while maintaining substantial potential for complexation of heavy metals. The formation of micelles and the bonding of heavy metals with surfactants bolstered the resistance of heavy metal ions to transmembrane transport. The presence of heavy metals in ionic form in wastewater facilitated their complexation with surfactants or micelles. Notably, the valence state and concentration of interfering ions in the environment could slightly influence the removal of heavy metals by MENF. Additionally, MENF displayed remarkable antifouling properties. The loose gel layer created by surfactant molecules and the micelle enhanced the membrane permeability and reduced the scaling tendency of heavy metals. This study contributes to an improved understanding of the mechanisms involved in heavy metal rejection by using MENF.

Role of phosphate in microalgal-bacterial symbiosis system treating wastewater containing heavy metals

Phosphorus is one of the important factors to successfully establish the microalgal-bacterial symbiosis (MABS) system. The migration and transformation of phosphorus can occur in various ways, and the effects of phosphate on the MABS system facing environmental impacts like heavy metal stress are often ignored. This study investigated the roles of phosphate on the response of the MABS system to zinc ion (Zn2+). The results showed that the pollutant removal effect in the MABS system was significantly reduced, and microbial growth and activity were inhibited with the presence of Zn2+. When phosphate and Zn2+ coexisted, the inhibition effects of pollutants removal and microbial growth rate were mitigated compared to that of only with the presence of Zn2+, with the increasing rates of 28.3% for total nitrogen removal, 48.9% for chemical oxygen demand removal, 78.3% for chlorophyll-a concentration, and 13.3% for volatile suspended solids concentration. When phosphate was subsequently supplemented in the MABS system after adding Zn2+, both pollutants removal efficiency and microbial growth and activity were not recovered. Thus, the inhibition effect of Zn2+ on the MABS system was irreversible. Further analysis showed that Zn2+ preferentially combined with phosphate could form chemical precipitate, which reduced the fixation of MABS system for Zn2+ through extracellular adsorption and intracellular uptake. Under Zn2+ stress, the succession of microbial communities occurred, and Parachlorella was more tolerant to Zn2+. This study revealed the comprehensive response mechanism of the co-effects of phosphate and Zn2+ on the MABS system, and provided some insights for the MABS system treating wastewater containing heavy metals, as well as migration and transformation of heavy metals in aquatic ecosystems.

Simultaneous production of biofuel, and removal of heavy metals using marine alga Turbinaria turbinata as a feedstock in NEOM Region, Tabuk

Depletion of fossil fuel and pollution by heavy metals are two major global issues. The cell wall of algae consists of polymers of polysaccharides such as cellulose, hemicellulose, alginate, starch, and many others that are readily hydrolyzed to monosaccharides and hence are amenable to fermentation into bioethanol. Moreover, algae contain lipids that may undergo trans-esterification to biodiesel, and can be absorbed by heavy metals. In this study, extraction of lipids from Turbinaria turbinata (common brown alga) from the beach of Sharma, NEOM, Tabuk, Saudi Arabia by different solvents hexane, methanol, and hexane: methanol (1:1), and trans-esterification was performed to obtain biodiesel and investigated by GC.MS. The alga residue after fats extractions by different solvents was used in bioremediation synthetic wastewater containing 50 ppm of As-3, Co+2, Cu+2, Fe+2, Mn+2, and Zn+2. The residue of defatted alga was hydrolyzed by 2% H2SO4 and then fermented to obtain bioethanol. The combination of hexane: methanol (1:1) gave the greatest amount of petroleum hydrocarbons, which contain Tetradecane, 5-methyl, Octacosane, Pentatriacontane, and a small amount of Cyclotrisiloxane, Hexamethyl. The most effective removal % was obtained with alga residue defatted by hexane: methanol (1:1), and methanol, 100% removal of As-3, 83% Co+2, 95% Cu+2, 97.25% Fe+2, Mn+2 79.69%, Zn+2 90.15% with 2 g alga /L at 3 hours. The lowest value of sugar was obtained with hexane: methanol residue but gave the highest bioethanol efficiency. Thus, it is possible to use Turbinaria turbinata, or brown alga as a feedstock to produce bio-diesel, and bioethanol, and to remove heavy metals from wastewater, which may have a great economic and environmental significance.

Mechanism of heavy metal ion biosorption by microalgal cells: A mathematic approach

Microalgal biomasses have been established as promising biosorbents for biosorption to remove heavy metal ions (HMIs) from wastewaters and contaminated natural waterbodies. Understanding the mechanism is important for the development of cost-effective processes for large scale applications. In this paper, a simple mathematical model was proposed for the predication of biosorption capacity of HMI by microalgal cells based on single cell mass, cell size, and HMI radius. One fundamental assumption based on which this model was developed, i.e., the biosorption of HMI by microalgal cells is predominantly monolayer bio-adsorption, was established based on kinetic, isothermal, FTIR, and Pb(II) distribution data generated in this study and in literature. The model was validated using a combination of experimental and literature data as well, demonstrating its capability to provide reasonable estimations although with discrepancies. The biosorption capacities of HMIs (mmol/g) by Chlorella vulgaris were experimentally determined to be in the following order: Pb(II)(0.360)> Zn(II)(0.325)> Cu(II)(0.254)> Ni(II)(0.249)> Cd(II)(0.235)> Co(II)(0.182). We systematically investigated the deviations of the predicted biosorption capacities in term of the effects of a few important parameters that were unaccounted for in the model, including the nanostructures on cell surface, HMI electronegativity, and biosorption buffer pH. Results suggest that the nanostructures on cell wall, likely the hairlike fibers, might be the primary locations where the binding sites for HMI were housed. Furthermore, isothermal data, which is suported by the predictions of this model, indicate the each effective binding site on C. vulgaris cell surface could bind to more than one Co(II) in biosorption while each of the other five HMIs tested in this study required more than one binding sites.

Advances, challenges, and prospects in microalgal-bacterial symbiosis system treating heavy metal wastewater

Heavy metal (HM) pollution, particularly in its ionic form in water bodies, is a chronic issue threatening environmental security and human health. The microalgal-bacterial symbiosis (MABS) system, as the basis of water ecosystems, has the potential to treat HM wastewater in a sustainable manner, with the advantages of environmental friendliness and carbon sequestration. However, the differences between laboratory studies and engineering practices, including the complexity of pollutant compositions and extreme environmental conditions, limit the applications of the MABS system. Additionally, the biomass from the MABS system containing HMs requires further disposal or recycling. This review summarized the recent advances of the MABS system treating HM wastewater, including key mechanisms, influence factors related to HM removal, and the tolerance threshold values of the MABS system to HM toxicity. Furthermore, the challenges and prospects of the MABS system in treating actual HM wastewater are analyzed and discussed, and suggestions for biochar preparation from the MABS biomass containing HMs are provided. This review provides a reference point for the MABS system treating HM wastewater and the corresponding challenges faced by future engineering practices.

Halo-alkaliphilic microbes as an effective tool for heavy metal pollution abatement and resource recovery: challenges and future prospects

The current study presents an overview of heavy metals bioremediation from halo-alkaline conditions by using extremophilic microorganisms. Heavy metal remediation from the extreme environment with high pH and elevated salt concentration is a challenge as mesophilic microorganisms are unable to thrive under these polyextremophilic conditions. Thus, for effective bioremediation of extreme systems, specialized microbes (extremophiles) are projected as potential bioremediating agents, that not only thrive under such extreme conditions but are also capable of remediating heavy metals from these environments. The physiological versatility of extremophiles especially halophiles and alkaliphiles and their enzymes (extremozymes) could conveniently be harnessed to remediate and detoxify heavy metals from the high alkaline saline environment. Bibliometric analysis has shown that research in this direction has found pace in recent years and thus this review is a timely attempt to highlight the importance of halo-alkaliphiles for effective contaminant removal in extreme conditions. Also, this review systematically presents insights on adaptive measures utilized by extremophiles to cope with harsh environments and outlines the role of extremophilic microbes in industrial wastewater treatment and recovery of metals from waste with relevant examples. Further, the major challenges and way forward for the effective applicability of halo-alkaliphilic microbes in heavy metals bioremediation from extremophilic conditions are also highlighted.

Roles and significance of chelating agents for potentially toxic elements (PTEs) phytoremediation in soil: A review

Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.

Potential use of saline resources for biofuel production using halophytes and marine algae: prospects and pitfalls

There exists a global challenge of feeding the growing human population of the world and supplying its energy needs without exhausting global resources. This challenge includes the competition for biomass between food and fuel production. The aim of this paper is to review to what extent the biomass of plants growing under hostile conditions and on marginal lands could ease that competition. Biomass from salt-tolerant algae and halophytes has shown potential for bioenergy production on salt-affected soils. Halophytes and algae could provide a bio-based source for lignoceelusic biomass and fatty acids or an alternative for edible biomass currently produced using fresh water and agricultural lands. The present paper provides an overview of the opportunities and challenges in the development of alternative fuels from halophytes and algae. Halophytes grown on marginal and degraded lands using saline water offer an additional material for commercial-scale biofuel production, especially bioethanol. At the same time, suitable strains of microalgae cultured under saline conditions can be a particularly good source of biodiesel, although the efficiency of their mass-scale biomass production is still a concern in relation to environmental protection. This review summaries the pitfalls and precautions for producing biomass in a way that limits environmental hazards and harms for coastal ecosystems. Some new algal and halophytic species with great potential as sources of bioenergy are highlighted.

Heavy Metals, Their Phytotoxicity, and the Role of Phenolic Antioxidants in Plant Stress Responses with Focus on Cadmium: Review

The current state of heavy metal (HM) environmental pollution problems was considered in the review: the effects of HMs on the vital activity of plants and the functioning of their antioxidant system, including phenolic antioxidants. The latter performs an important function in the distribution and binding of metals, as well as HM detoxification in the plant organism. Much attention was focused on cadmium (Cd) ions as one of the most toxic elements for plants. The data on the accumulation of HMs, including Cd in the soil, the entry into plants, and the effect on their various physiological and biochemical processes (photosynthesis, respiration, transpiration, and water regime) were analyzed. Some aspects of HMs, including Cd, inactivation in plant tissues, and cell compartments, are considered, as well as the functioning of various metabolic pathways at the stage of the stress reaction of plant cells under the action of pollutants. The data on the effect of HMs on the antioxidant system of plants, the accumulation of low molecular weight phenolic bioantioxidants, and their role as ligand inactivators were summarized. The issues of polyphenol biosynthesis regulation under cadmium stress were considered. Understanding the physiological and biochemical role of low molecular antioxidants of phenolic nature under metal-induced stress is important in assessing the effect/aftereffect of Cd on various plant objects-the producers of these secondary metabolites are widely used for the health saving of the world's population. This review reflects the latest achievements in the field of studying the influence of HMs, including Cd, on various physiological and biochemical processes of the plant organism and enriches our knowledge about the multifunctional role of polyphenols, as one of the most common secondary metabolites, in the formation of plant resistance and adaptation.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

Efficient microalgal lipid production driven by salt stress and phytohormones synergistically

In this study, a novel method of coupling phytohormones with saline wastewater was proposed to drive efficient microalgal lipid production. All the six phytohormones effectively promoted microalgae growth in saline wastewater, and further increased the microalgal lipid content based on salt stress, so as to achieve a large increase in microalgal lipid productivity. Among the phytohormones used, abscisic acid had the most significant promoting effect. Under the synergistic effect of 20 g/L salt and 20 mg/L abscisic acid, the microalgal lipid productivity reached 3.7 times that of the control. Transcriptome analysis showed that differentially expressed genes (DEGs) of microalgae in saline wastewater were mainly up-regulated under the effects of phytohormones except brassinolide. Common DEGs analysis showed that phytohormones all regulated the expression of genes related to DNA repair and substance synthesis. In conclusion, synergistic effect of salt stress and phytohormones can greatly improve the microalgal lipid production efficiency.

Responses and tolerance mechanisms of microalgae to heavy metal stress: A review

Microalgae, the primary producers in water ecosystems, are the main food of fish and shrimp. Microalgae have a great capacity to absorb heavy metals, and low concentrations of heavy metals can promote the growth of them. But high concentrations have a strong influence on the physiological and biochemical processes in algae, such as growth, photosynthesis, cell ultrastructure, protein content and fatty acid composition. Heavy metals may also induce the formation of reactive oxygen species (ROS), which causes the oxidation damage of protein, lipid and thiol peptides, and activates the antioxidant system. Heavy metals can be removed or converted into another state by biosorption of cell surface, accumulation in cells, combining with antioxidant enzymes and so on. This review summarized the responses of microalgae to heavy metals and comprehensively described the removal and tolerance mechanisms by extracellular adsorption and intracellular accumulation, which are helpful to treat pollution and improve the culture of microalgae.

Rethinking quantified methods for arsenic speciation and risk in a biowaste hydrothermal liquefaction system

Controversy exists to quantify the fate and speciation of Arsenic (As). We investigated its characteristics by As-containing algae in various pH hydrothermal liquefaction (HTL) system, specifically via two classical methods, i.e. the European Community Bureau of Reference (BCR) and Wenzel's method. Solid residue immobilized 11.23-16.55% of As, and 88.07-82.44% was in aqueous by the pH regulators (e.g., CH₃COOH, HCl, and KOH). ICP-MS and XRD analysis revealed that As (V) was converted into As (III) and As (0) in the solid residue, while the As (V) was mainly converted into As (III) in the aqueous phase during HTL. When the classified forms of As in solid residue are compared, Wenzel's method was more appropriate for dividing the bio-availability forms of As, whereas BCR was better for estimating the toxic-potential forms of As. Subsequently, pH regulators raised the risk of As in solid residue associated with the increasing of unstable forms. The amide was hydrolyzed to carboxylic acid with acidic additives, which weakened the reducing environment in the HTL process. In contrast, the amide was hydrolyzed to ammonia with the alkaline additives, which enhanced the reducing environment and increased the risk of As in products. This work provided a new insight in systematically evaluating the risk and speciation of As in HTL.

Current Status and Future Trends in Removal, Control, and Mitigation of Algae Food Safety Risks for Human Consumption

With the rapid development of the economy and productivity, an increasing number of citizens are not only concerned about the nutritional value of algae as a potential new food resource but are also, in particular, paying more attention to the safety of its consumption. Many studies and reports pointed out that analyzing and solving seaweed food safety issues requires holistic and systematic consideration. The three main factors that have been found to affect the food safety of algal are physical, chemical, and microbiological hazards. At the same time, although food safety awareness among food producers and consumers has increased, foodborne diseases caused by algal food safety incidents occur frequently. It threatens the health and lives of consumers and may cause irreversible harm if treatment is not done promptly. A series of studies have also proved the idea that microbial contamination of algae is the main cause of this problem. Therefore, the rapid and efficient detection of toxic and pathogenic microbial contamination in algal products is an urgent issue that needs to be addressed. At the same time, two other factors, such as physical and chemical hazards, cannot be ignored. Nowadays, the detection techniques are mainly focused on three major hazards in traditional methods. However, especially for food microorganisms, the use of traditional microbiological control techniques is time-consuming and has limitations in terms of accuracy. In recent years, these two evaluations of microbial foodborne pathogens monitoring in the farm-to-table chain have shown more importance, especially during the COVID-19 pandemic. Meanwhile, there are also many new developments in the monitoring of heavy metals, algal toxins, and other pollutants. In the future, algal food safety risk assessment will not only focus on convenient, rapid, low-cost and high-accuracy detection but also be connected with some novel technologies, such as the Internet of Things (artificial intelligence, machine learning), biosensor, and molecular biology, to reach the purpose of simultaneous detection.

Response mechanisms of microalgal-bacterial granular sludge to zinc oxide nanoparticles

Currently, zinc oxide nanoparticles (ZnO-NPs) with their widespread applications lead to their increasing dosages in wastewater, posing an urgent threat to wastewater treatment. Herein, the responses of the emerging microalgal-bacterial granular sludge (MBGS) to ZnO-NPs were investigated. The results showed that the performance of MBGS was significantly affected when the concentration of ZnO-NPs reached 10 mg/L, especially for the removal of ammonia and phosphorus. ZnO-NPs on the granular surface could affect microalgae photosynthesis by shading, while antioxidant enzymes could be generated against overproduced reactive oxygen species. Specifically, ZnO-NPs addition to MBGS systems altered the microbial community structure (e.g. Cyanobacteria) and function (e.g. biosynthesis) of prokaryotes rather than eukaryotes. Overall, the MBGS could exhibit multiple mechanisms to alleviate the ZnO-NPs toxicity. This study is expected to add knowledge on MBGS in the treatment of wastewater containing nanoparticles.

Hydrothermal processing of microalgal biomass: Circular bio-economy perspectives for addressing food-water-energy nexus

Hydrothermal processing of microalgae is regarded as a promising technology to generate multitude of energy based and value-added products. The niche of hydrothermal technologies is still under infancy in terms of the technical discrepancies related to research and development. Thus, the present review critically surveyed the recent advancements linked to the influencing factors governing the algal hydrothermal processing in terms of the product yield and quality. The sustainability of hydrothermal technologies as a standalone method and in broader aspects of circular bio-based economy for energy and value-added platform chemicals are comprehensively discussed. Process optimization and strategic integration of technologies has been suggested to improve efficiency, with reduced energy usage and environmental impacts for addressing the energy-food-water supply chains. Within the wider economic transition and sustainability debate, the knowledge gaps identified and the research hotspots fostering future perspective solutions proposed herewith would facilitate its real-time implementation.

Exploring indigenous freshwater chlorophytes in integrated biophotovoltaic system for simultaneous wastewater treatment, heavy metal biosorption, CO2 biofixation and biodiesel generation

The study explored the combined photosynthetic activities of two green microalgal species, Tetradesmus obliquus and Tetradesmus reginae, on an integrated biophotovoltaic (BPV) platform for simultaneous wastewater treatment, toxic metal biosorption, carbon biofixation, bioelectricity generation and biodiesel production. The experimental setup comprised of a dual-chambered BPV with copper anode surrounded by T. obliquus in BG11 media, and copper cathode with T. reginae in municipal wastewater separated by Nafion 117 membrane. The study reported a maximum power density of 0.344 Wm^-2 at a cell potential of 0.415 V with external resistance of 1000 Ω and 0.3268 V maximum open-circuit voltage. The wastewater electrical conductivity and pH increased from 583 ± 22 to 2035 ± 29.31 mS/cm and 7.403 ± 0.174 to 8.263 ± 0.055 respectively, signifying increased photosynthetic and electrochemical activities. Residual nitrogen, phosphorus, chemical oxygen demand, arsenic, cadmium, chromium and lead removal efficiencies by T. reginae were 100%, 80.68%, 71.91%, 47.6%, 88.82%, 71.24% and 92.96%, respectively. T. reginae accumulated maximum biomass of 0.605 ± 0.033 g/L with a CO₂ biosequestration rate of 0.166 ± 0.010 gCO₂/L/day and 42.40 ± 1.166% lipid content. Methyl palmitate, methyl undecanoate and 13-octadecenoic acid with relative abundances of 37.24%, 24.80% and 12.02%, respectively were confirmed.

A review on the current status and post-pandemic prospects of third-generation biofuels

The rapid increase in fossil fuel depletion, environmental degradations, and industrialization have encouraged the need and production of sustainable fuel alternatives. This has led to the increase in interest in biofuels, especially third-generation biofuels produced from microalgae since they do not compete with food and land supplies. However, the global share for these biofuels has been inadequate recently, especially due to the ongoing global pandemic. Therefore, this paper offers a review of the state-of-the-art study of the production field of third-generation biofuel from microalgae. The current review aims to focus on the different aspects of algal biofuel production that requires further attention to produce it at a large scale. It was found that several strategies during the life cycle of algal biofuel production can significantly increase its quality and yield while reducing cost, energy, and other related attributes. This paper also focuses on the challenges for large-scale production of third-generation biofuels pre and post COVID-19 to better understand the barriers. The high cost of this fuel’s production and sale tends to be the major reason behind the lack of large-scale production, hence, inadequacy to meet the global need. Third-generation biofuel has so much to offer including many integrated applications and advanced uses in the future fuel industry. Therefore, it is important to cope with the ongoing circumstances and emphasize the future of algal biofuel as a sustainable source.

Integrative artificial intelligence models for Australian coastal sediment lead prediction: An investigation of in-situ measurements and meteorological parameters effects

Heavy metals (HMs) such as Lead (Pb) have played a vital role in increasing the sediments of the Australian bay's ecosystem. Several meteorological parameters (i.e., minimum, maximum and average temperature (T_min, T_max and T_avg^oC), rainfall (R_n mm) and their interactions with the other batch HMs, are hypothesized to have high impact for the decision-making strategies to minimize the impacts of Pb. Three feature selection (FS) algorithms namely the Boruta method, genetic algorithm (GA) and extreme gradient boosting (XGBoost) were investigated to select the highly important predictors for Pb concentration in the coastal bay sediments of Australia. These FS algorithms were statistically evaluated using principal component analysis (PCA) Biplot along with the correlation metrics describing the statistical characteristics that exist in the input and output parameter space of the models. To ensure a high accuracy attained by the applied predictive artificial intelligence (AI) models i.e., XGBoost, support vector machine (SVM) and random forest (RF), an auto-hyper-parameter tuning process using a Grid-search approach was also implemented. Cu, Ni, Ce, and Fe were selected by all the three applied FS algorithms whereas the T_avg and R_n inputs remained the essential parameters identified by GA and Boruta. The order of the FS outcome was XGBoost > GA > Boruta based on the applied statistical examination and the PCA Biplot results and the order of applied AI predictive models was XGBoost-SVM > GA-SVM > Boruta-SVM, where the SVM model remained at the top performance among the other statistical metrics. Based on the Taylor diagram for model evaluation, the RF model was reflected only marginally different so overall, the proposed integrative AI model provided an evidence a robust and reliable predictive technique used for coastal sediment Pb prediction.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Algal treatment of membrane rejects: a unique approach towards zero liquid discharge

A major concern in membrane-based water purification system is generation of huge concentrate stream and wastage of water. A typical Reverse osmosis (RO) or Nanofiltration (NF) system generates 20-25% reject containing high amount of dissolved salts and other contaminants. Contrary to popular belief, this reject water cannot be used without removing the contaminants or cannot be discharged anywhere. Main goal of this project is to find a cheapest and green way for treatment of RO/NF reject. Algal evaporation technique was explored in laboratory scale, to find its suitability for treatment of chloride-rich membrane reject in actual scenario and based on the results obtained, a pilot plant of 48KL was established on Hooghly Met Coke division (HMC), Tata Steel. Particular species of microalgae was selected, to take up minerals from reject water. There are several types of bacteria and symbiotic algae associated with selected micro algae survive in high TDS. A unique slope roof system, connected with algae growth tank, helps in efficient evaporation of water ensuring a Zero discharge. A markedly improved performance was achieved when algal evaporation followed solar evaporation. A total evaporation of 11 L/m²/day was observed, which was almost five times faster than Solar evaporation.

Microalgal bioremediation of heavy metal pollution in water: Recent advances, challenges, and prospects

With the rapid economy development and population surge, the water resources available for direct use on the earth have been in shortage. Therefore, water pollution remediation inevitably becomes the focus of global attention. Aside from their capacity to fix and effectively control the emission of carbon dioxide thus achieve negative carbon emission, microalgae and its products modified by genetic engineering and other technologies also have a broad prospect in sewage treatment such as efficiently removing all kinds of pollutants in water and producing high-quality biofuels after use. Therefore, research on these organisms has gradually deepened in recent years. This paper summarizes the bioremediation mechanism of heavy metal ions in water by using microalgae and their modified products. The relevant research progresses since 2015 are critically reviewed and discussed. Challenges and prospects are also put forward for their industrial implementation.

Algal biomass valorisation to high-value chemicals and bioproducts: Recent advances, opportunities and challenges

Algae are considered promising biomass resources for biofuel production. However, some arguments doubt the economical and energetical feasibility of algal cultivation, harvesting, and conversion processes. Beyond biofuel, value-added bioproducts can be generated via algae conversion, which would enhance the economic feasibility of algal biorefineries. This review primarily focuses on valuable chemical and bioproduct production from algae. The methods for effective recovery of valuable algae components, and their applications are summarized. The potential routes for the conversion of lipids, carbohydrates, and proteins to valuable chemicals and bioproducts are assessed from recent studies. In addition, this review proposes the following challenges for future algal biorefineries: (1) utilization of naturally grown algae instead of cultivated algae; (2) fractionation of algae to individual components towards high-selectivity products; (3) avoidance of humin formation from algal carbohydrate conversion; (4) development of strategies for algal protein utilisation; and (5) development of efficient processes for commercialization and industrialization.

Recent advancements in the removal/recovery of toxic metals from aquatic system using flotation techniques

The paramount cause of water scarcity is pollution, which is becoming a massive issue since the last century. Besides, it is evident that water pollution is the main cause of emerging contaminants that are left untreated from industries, can cause serious threats to humans and biota as well. One of the best ways in remediating pollutants and finding a way for generating useable water is to use this contaminated water after the necessary treatment. Heavy metals are of major concern in treatment because of their toxicity, non-biodegradability, carcinogenicity, and they can cause inevitable damages even at low concentrations. In this review article, available different flotation techniques are discussed to address this issue. Flotation tends to be one of the promising techniques that have shown a high scope because of its high produce, low sludge formation, and ease of operation. From the several pieces of literature, it can be inferred that the flotation process can be conducted in one step, and that does not need any expensive materials. Further, this paper deliberates the versatility of each process in disclosing its advantages, limitations, further scope of research and fills the loopholes in the process for better effectiveness. Overall, flotation is a highly probable as well as effective treatment technology to eradicate noxious pollutants present in wastewater and thus helps to compromise environmental and social sustainability.

Advanced treatment of chicken farm flushing wastewater by integrating Fenton oxidation and algal cultivation process for algal growth and nutrients removal

Algae based wastewater treatment has been considered as the most promising win-win strategy for nutrients removal and biomass accumulation. However, the poor linking between traditional wastewater treatment and algal cultivation limits the achievement of this goal. In this study, a novel combination of Fenton oxidation and algal cultivation (CFOAC) system was investigated for the treatment of chicken farm flushing wastewater (CFFW). Fenton oxidation (FO) was adopted to reduce the excessive ammonia nitrogen, which might inhibit the algal growth. The results showed that single FO pretreatment removed 70.5 %, 96.7 %, 86.1 %, and 96.2 % of TN, TAN, TP, and COD, respectively. The highest biomass (235.8 mg/L/d) and lipid (77.3 mg/L/d) productivities were achieved on optimized CFOAC system after 7 days batch cultivation. Accordingly, the nutrients removal efficiencies increased to almost 100 %. Further fatty acid profile analysis showed that algae grown on optimal CFOAC system accumulated a high level of total lipids (32.8 %) with C16-C18 fatty acid as the most abundant compositions (accounting for over 60.6 %), which were propitious to biodiesel production. In addition, this CFOAC system was magnified from 1 L flask to 50 L horizontal pipe photobioreactor (HPPB) in semi-continuously culture under optimal conditions. The average biomass and lipid productivities were 995.7 mg/L/d and 320.6 mg/L/d, respectively, when cultured at 6 days hydraulic retention time with 1/3 substitution every two days. These findings proved that the novel CFOAC system is efficient in nutrients removal, algal cultivation, and biomass production for advanced treatment of CFFW.

Insights into the genetic and metabolic engineering approaches to enhance the competence of microalgae as biofuel resource: A review

Conventional fuel resources are overburden with speedy global energy demand which ensued the urgent need of alternate energy resources. Biofuel generation efficiency of microalgae is notable due to their comparatively rapid biomass production rate and high oil content. But, the employment of microalgae as biofuel resource is in infancy due to low productivity and high production cost. The issues can be addressed by employing engineered microalgal strains that would be able to efficiently generate enhanced levels of biomass with augmented lipid and/or carbohydrate content for proficient biofuel production. Genetic alterations and metabolic engineering of microalgal species might be helpful in developing high stress-tolerant strains with improved properties for biofuel generation. Various omics approaches appeared significant to upgrade the microalgal lipid production. Intervention of genetic and metabolic engineering approaches would facilitate the development of microalgae as a competent biofuel resource and inflate the economic commercialization of biofuels.

Impact of heavy metals in the microalga Chlorella sorokiniana and assessment of its potential use in cadmium bioremediation

The chlorophyte microalga Chlorella sorokiniana was tested for the bioremediation of heavy metals pollution. It was cultured with different concentrations of Cu²⁺, Cd²⁺, As (III) and As (V), showing a significant inhibition on its growth at concentrations of 500 µM Cu²⁺, 250 µM Cd²⁺, 750 µM AsO₃^3- and 5 mM AsO₄^3- or higher. Moreover, the consumption of ammonium was also studied, showing significant differences for concentrations higher than 1 mM of Cu²⁺ and As (III), and 5 mM of As (V). The determination of intracellular heavy metals concentration revealed that Chlorella sorokiniana is an outstanding Cd accumulator organism, able to accumulate 11,232 mg kg^-1 of Cd, and removing 65% of initial concentration of this heavy metal. Finally, antioxidant enzymes, such as catalase (CAT) and ascorbate peroxidase (APX), and enzymes involved in the production of glutamate and cysteine, such as glutamine syntethase (GS), glutamate dehydrogenase (GDH), O-acetylserine (thiol) lyase (OASTL) and NAD-isocitrate dehydrogenase (NAD-IDH) were studied both at gene expression and enzymatic activity levels. These enzymes exhibited different grades of upregulation, especially in response to Cd and As stress. However, GS expression was downregulated when Chlorella sorokiniana was cultured in the presence of these heavy metals.

Bioremediation of heavy metals from wastewater: a current perspective on microalgae-based future

Heavy metals-containing drinking water and wastewater are posing a severe threat to the environment, and living beings on land, air and water. Different conventional, advanced nanomaterials-based and biological method has been employed for the treatment of heavy metals. Among the biological methods, microalgae are an important group of micro-organisms that have numerous environmental applications and can remediate heavy metals from wastewater. Also, it has numerous advantages over conventional remediation processes. Microalgae cells can uptake the heavy metal via different physiological and biological methods and are utilized as a nutrient source to regulate its metabolic process for the production of biomass. Furthermore, the enhancement in heavy metal removal efficiency can be improved using different strategies such as immobilization of algal cells, development of algal consortia and designing of microalgae-based nanocomposite materials. Also, it can significantly contribute towards environmental sustainability and future. Thus, the review provides a critical overview of heavy metals and their existence along with their negative effects on humans. This review provides insight on recent advanced nanomaterial approaches for the removal of heavy metals, overviews of microalgae-based heavy metal uptake mechanisms and their potential for the amputation of different heavy metals. Furthermore, the special focus is on recent strategies that enhance heavy metal removal efficiency and contribute towards sustainability for the development of a microalgae-based future.

Hydrothermal liquefaction accelerates the toxicity and solubility of arsenic in biowaste

Arsenic (As) is one of notorious metalloids due to its high toxicity to human beings and ecological system. Understanding its fate and speciation transformation mechanism during hydrothermal liquefaction (HTL) of microalgae is of crucial importance for the application of its HTL products. 80.0-96.7% of As in raw microalgae was migrated into the liquid phase (aqueous phase and biocrude oil) with the increase of reaction severity from 0.108 to 0.517. HPLC-ICPMS reveals that 67% of the As in microalgae accounted for As(V) with a concentration of 68.4 mg/kg. The other fractions in microalgae were primarily As(III) with a concentration of 36.3 mg/kg. Model compounds experiments illustrate that over 30% of the As(V) in feedstocks was unexpectedly converted into more soluble and toxic As (III). Hydrochar containing O-containing groups (e.g., aliphatic C-OH) was probably contribute to the reduction transformation of As(V) to higher toxic As(III). Meantime, the aqueous phase facilitated the reduction reaction via providing a reducing environment and serving as hydrogen donator. This study firstly revealed the speciation transformation of As(V) to As(III) during HTL of wastewater cultivated microalgae.

Biosorption of iron ions through microalgae from wastewater and soil: Optimization and comparative study

Microalgae play a significant role in wastewater and soil-bioremediation due to their low-cost and eco-friendly nature. In this study, 21 strains of microalgae were evaluated during removal of iron Fe²⁺ from aqueous solutions. Out of 21 strains, five strains (S. obliquus, C. fusca, C. saccharophila, A. braunii, and Leptolyngbya JSC-1) were selected based on their comparative tolerance for the iron Fe²⁺. These strains were further studied for their Fe²⁺ removal efficiency. The results indicated that the selected strains could maintain normal growth pattern up to 50 ppm of Fe²⁺, while the concentration beyond 50 ppm inhibited the growth. The Fe²⁺ bio-removal efficiencies from wastewater were 97, 98, 97.5, 99, and 99.9%, respectively. Similarly, in soil the bio-removal efficiencies of the five strains were measured as 76, 77, 76, 77.5, and 79%, repectively. A slight increase in leakage of protein and nucleic acids was observed in all strains, which is unlikely could be the reason of iron exposure as similar pattern was also found in control groups. Current results suggested that the selected five strains have high potential to be used as bioremediation tools for Fe²⁺ contaminated water and soil.

Effect of cadmium in the microalga Chlorella sorokiniana: A proteomic study

Cadmium is one of the most common heavy metals in contaminated aquatic environments and one of the most toxic contaminants for phytoplankton. Nevertheless, there are not enough studies focused on the effect of this metal in algae. Through a proteomic approach, this work shows how Cd can alter the growth, cell morphology and metabolism of the microalga Chlorella sorokiniana. Using the sequential window acquisition of all theoretical fragment ion spectra mass spectrometry (SWATH-MS), we concluded that exposure of Chlorella sorokiniana to 250 μM Cd²⁺ for 40 h caused downregulation of different metabolic pathways, such as photosynthesis, oxidative phosphorylation, glycolysis, TCA cycle and ribosomal proteins biosynthesis. However, photorespiration, antioxidant enzymes, gluconeogenesis, starch catabolism, and biosynthesis of glutamate, cysteine, glycine and serine were upregulated, under the same conditions. Finally, exposure to Cd also led to changes in the metabolism of carotenoids and lipids. In addition, the high tolerance of Chlorella sorokiniana to Cd points to this microalga as a potential microorganism to be used in bioremediation processes.

CRISPR/Cas technology promotes the various application of Dunaliella salina system

Dunaliella salina (D. salina) has been widely applied in various fields because of its inherent advantages, such as the study of halotolerant mechanism, wastewater treatment, recombinant proteins expression, biofuel production, preparation of natural materials, and others. However, owing to the existence of low yield or in the laboratory exploration stage, D. salina system has been greatly restricted for practical production of various components. In past decade, significant progresses have been achieved for research of D. salina in these fields. Among them, D. salina as a novel expression system demonstrated a bright prospect, especially for large-scale production of foreign proteins, like the vaccines, antibodies, and other therapeutic proteins. Due to the low efficiency, application of traditional regulation tools is also greatly limited for exploration of D. salina system. The emergence of the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas system offers a precise editing tool to overcome the obstacles of D. salina system. This review not only comprehensively summarizes the recent progresses of D. salina in domain of gene engineering but also gives a deep analysis of problems and deficiencies in different fields of D. salina. Moreover, further prospects of CRISPR/Cas system and its significant challenges have been discussed in various aspects of D. salina. It provides a great referencing value for speeding up the maturity of D. salina system, and also supplies practical guiding significance to expand the new application fields for D. salina. KEY POINTS: • The review provides recent research progresses of various applications of D. salina. • The problems and deficiencies in different fields of D. salina were deeply analyzed. • The further prospects of CRISPR/Cas technology in D. salina system were predicted. • CRISPR/Cas system will promote the new application fields and maturity for D. salina.