Direct conversion of untreated cane molasses into butyric acid by engineered Clostridium tyrobutyricum

Cofactor engineering in Thermoanaerobacterium aotearoense SCUT27 for maximizing ethanol yield and revealing an enzyme complex with high ferredoxin-NAD+ reductase activity

Thermoanaerobacterium aotearoense SCUT27 is a prominent producer of biofuels from lignocellulosic materials. To provide sufficient NAD(P)H for ethanol production, redox-related genes, including lactate dehydrogenase (ldh), redox-sensing transcriptional repressor (rex), and hydrogenase (hfsB), were knocked out. However, the growth of strain PRH (Δldh/Δrex/ΔhfsB) was suppressed due to the intracellular redox state imbalance with the increased NADH concentration. Coincidentally, when the Bcd-EtfAB (BCD) complex was overexpressed, the resulting strain PRH-B3 (Δldh/Δrex/ΔhfsB::BCD) grew rapidly and produced ethanol with a high yield. With lignocellulosic hydrolysates, PRH-BA (Δldh/Δrex/ΔhfsB::BCD::adhE) demonstrated high ethanol productivity and yield, reaching levels of 0.45-0.51 g/L/h and 0.46-0.53 g/g sugars, respectively. The study results shed light on the cofactor balance for cell stability and the high ferredoxin-NAD+ reductase activity of the BCD complex under an intracellular low redox state. They also provide an essential reference for developing strains for improved biofuel production.

Microbial cell factory for butyl butyrate production: Knowledges and perspectives

Butyl butyrate is a short-chain fatty acid ester (C8) with a fruity aroma. It has broad prospects in the fields of foods, cosmetics and biofuels. At present, butyl butyrate is produced by chemical synthesis in the industry, but it is highly dependent on petroleum-based products. The growing concerns regarding the future scarcity of fossil fuels have been strongly promoted the transition from traditional fossil fuels and products to renewable bioenergy and biochemicals. Therefore, it is necessary to develop a green biochemical technology to replace traditional petroleum-based materials. In recent years, microorganisms such as Escherichia coli and Clostridium have been engineered to serve as cell factories for the sustainable one-pot production of short-chain fatty acid esters, including butyl butyrate. This opinion highlights the recent development in the use of lipases and alcohol acyltransferases (AATs) for butyl butyrate production in microbial fermentation, as well as future perspectives.

Development of inducible promoters for regulating gene expression in Clostridium tyrobutyricum for biobutanol production

Clostridium tyrobutyricum is an anaerobe known for its ability to produce short-chain fatty acids, alcohols, and esters. We aimed to develop inducible promoters for fine-tuning gene expression in C. tyrobutyricum. Synthetic inducible promoters were created by employing an Escherichia coli lac operator to regulate the thiolase promoter (PCathl) from Clostridium acetobutylicum, with the best one (LacI-Pto4s) showing a 5.86-fold dynamic range with isopropyl β- d-thiogalactoside (IPTG) induction. A LT-Pt7 system with a dynamic range of 11.6-fold was then created by combining LacI-Pto4s with a T7 expression system composing of RNA polymerase (T7RNAP) and Pt7lac promoter. Furthermore, two inducible expression systems BgaR-PbgaLA and BgaR-PbgaLB with a dynamic range of ~40-fold were developed by optimizing a lactose-inducible expression system from Clostridium perfringens with modified 5' untranslated region (5' UTR) and ribosome-binding site (RBS). BgaR-PbgaLB was then used to regulate the expressions of a bifunctional aldehyde/alcohol dehydrogenase encoded by adhE2 and butyryl-CoA/acetate Co-A transferase encoded by cat1 in C. tyrobutyricum wild type and Δcat1::adhE2, respectively, demonstrating its efficient inducible gene regulation. The regulated cat1 expression also confirmed that the Cat1-catalyzed reaction was responsible for acetate assimilation in C. tyrobutyricum. The inducible promoters offer new tools for tuning gene expression in C. tyrobutyricum for industrial applications.

Enhancing Poly-γ-glutamic Acid Production in Bacillus tequilensis BL01 through a Multienzyme Assembly Strategy and Expression Features of Glutamate Synthesis from Corynebacterium glutamicum

The enhancement of intracellular glutamate synthesis in glutamate-independent poly-γ-glutamic acid (γ-PGA)-producing strains is an essential strategy for improving γ-PGA production. Bacillus tequilensis BL01ΔpgdSΔggtΔsucAΔgudB:P43-ppc-pyk-gdhA for the efficient synthesis of γ-PGA was constructed through expression of glutamate synthesis features of Corynebacterium glutamicum, which increased the titer of γ-PGA by 2.18-fold (3.24 ± 0.22 g/L) compared to that of B. tequilensis BL01ΔpgdSΔggtΔsucAΔgudB (1.02 ± 0.11 g/L). To further improve the titer of γ-PGA and decrease the production of byproducts, three enzymes (Ppc, Pyk, and AceE) were assembled to a complex using SpyTag/Catcher pairs. The results showed that the γ-PGA titer of the assembled strain was 31.31% higher than that of the unassembled strain. To further reduce the production cost, 25.73 ± 0.69 g/L γ-PGA with a productivity of 0.48 g/L/h was obtained from cheap molasses. This work provides new metabolic engineering strategies to improve the production of γ-PGA in B. tequilensis BL01. Furthermore, the engineered strain has great potential for the industrial production of γ-PGA from molasses.

Sugar Utilization-Associated Food-Grade Selection Markers in Lactic Acid Bacteria and Yeast

This comprehensive review explores the development of food-grade selection markers in lactic acid bacteria and yeast; some of their strains are precisely defined as safe microorganisms and are crucial in the food industry. Lactic acid bacteria, known for their ability to ferment carbohydrates into lactic acid, provide essential nutrients and contribute to immune responses. With its strong fermentation capabilities and rich nutritional profile, yeast finds use in various food products. Genetic engineering in these microorganisms has grown rapidly, enabling the expression of enzymes and secondary products for food production. However, the focus is on ensuring safety, necessitating food-grade selection markers. Traditional antibiotic and heavy metal resistance selection markers pose environmental and health risks, prompting the search for safer alternatives. Complementary selection markers, such as sugar utilization markers, offer a promising solution. These markers use carbohydrates as carbon sources for growth and are associated with the natural metabolism of lactic acid bacteria and yeast. This review discusses the use of specific sugars, such as lactose, melibiose, sucrose, D-xylose, glucosamine, and N-acetylglucosamine, as selection markers, highlighting their advantages and limitations. In summary, this review underscores the importance of food-grade selection markers in genetic engineering and offers insights into their applications, benefits, and challenges, providing valuable information for researchers in the field of food microbiology and biotechnology.

Cost-effective production of ergothioneine using Rhodotorula mucilaginosa DL-X01 from molasses and fish bone meal enzymatic hydrolysate

Ergothioneine (EGT) is a high-value natural antioxidant that cannot be synthesized by the human body. This study showed that Rhodotorula mucilaginosa DL-X01 can use untreated molasses and fish bone meal enzymatic hydrolysate as the substrates to synthesize EGT. By optimizing the growth conditions, the EGT yield reached 29.39 mg/L when molasses and fish bone meal (FBM) were added at 60 g/L and 400 g/L respectively. Finally, the EGT yield was increased to 216.25 mg/L by fed-batch fermentation in a 5 L bioreactor. Compared with the fermentation by yeast extract peptone dextrose medium, the feedstock cost of EGT production was reduced by 330.91 % by using molasses and FBM as substrates. These results showed that R. mucilaginosa DL-X01 can produce high-value EGT using two cheap processing by-products, molasses and FBM, which is of great significance for environmental protection and sustainable development.

Turning waste into treasure: Biosynthesis of value-added 2-O-α-glucosyl glycerol and d-allulose from waste cane molasses through an in vitro synthetic biology platform

The efficient and economical conversion of agricultural waste into glycosides and rare sugars is challenging. Herein, an in vitro synthetic bienzyme system consisting of sucrose phosphorylase and d-allulose 3-epimerase was constructed to produce 2-O-α-glucosyl glycerol and d-allulose from cane molasses. Lactic acid in the cane molasses significantly induced sucrose phosphorylase to hydrolyze sucrose instead of glycosylation. Notably, lactic acid significantly inhibited the catalytic performance of d-allulose 3-epimerase only in the presence of Na+ and K+, with an inhibition rate of 75%. After removing lactic acid and metal ions, 116 g/L 2-O-α-glucosyl glycerol and 51 g/L d-allulose were synthesized from 500 mM sucrose in the treated cane molasses with a sucrose consumption rate of 97%. Our findings offer an economically efficient and environmentally friendly pathway for the industrial production of glycosides and rare sugars from food industry waste.

Engineering of Clostridium tyrobutyricum for butyric acid and butyl butyrate production from cassava starch

Clostridium tyrobutyricum has been successfully engineered to produce butyrate, butanol, butyl butyrate, and γ-aminobutyric acid. It would be interesting to produce bio-chemicals and bio-fuels directly using starch from non-food crop, e.g., cassava, by engineered C. tyrobutyricum. In this study, heterologous α-amylases were screened and expressed in C. tyrobutyricum, resulting in successfully starch hydrolyzation. Furthermore, α-glucosidase (AgluI) was co-expressed with α-amylases, resulting in enhancement in the capacity of starch hydrolyzation and butyrate production. When increasing the cassava starch concentration to 100 g/L, the engineered strain CTAA05 produced 27.0 g/L butyrate. In addition, when introducing butyl butyrate synthetic pathway, strain MU3-AAV produced 26.8 g/L butyl butyrate with 100 g/L cassava starch as substrate. This study showed a generalizable framework to engineered anaerobes for anaerobic production of bio-chemicals and bio-fuels from starchy biomass.

Metabolic engineering of Thermoanaerobacterium aotearoense strain SCUT27 for biofuels production from sucrose and molasses

BACKGROUND

Sucrose-rich sugarcane trash surpasses 28 million tons globally per year. Effective biorefinery systems could convert these biomasses to bioproducts, such as bioethanol from sugarcane sucrose in Brazil. Thermophilic microbes for biofuels have attracted great attention due to their higher fermentation temperature and wide substrate spectrum. However, few thermophiles using sucrose or molasses for biofuels production was reported. Thermoanaerobacterium aotearoense SCUT27 has been considered as an efficient ethanol producer, but it cannot directly utilize sucrose. In this study, various sucrose metabolic pathways were introduced and analyzed in Thermoanaerobaterium.

RESULTS

The sucrose-6-phosphate hydrolase (scrB), which was from a screened strain Thermoanaerobacterium thermosaccharolyticum G3-1 was overexpressed in T. aotearoense SCUT27 and endowed this strain with the ability to utilize sucrose. In addition, overexpression of the sucrose-specific PTS system (scrA) from Clostridium acetobutylicum accelerated the sucrose transport. To strengthen the alcohols production and substrates metabolism, the redox-sensing transcriptional repressor (rex) in T. aotearoense was further knocked out. Moreover, with the gene arginine repressor (argR) deleted, the ethanologenic mutant P8S10 showed great inhibitors-tolerance and finally accumulated ~ 34 g/L ethanol (a yield of 0.39 g/g sugars) from pretreated cane molasses in 5 L tank by fed-batch fermentation. When introducing butanol synthetic pathway, 3.22 g/L butanol was produced by P8SB4 with a yield of 0.44 g alcohols/g sugars at 50℃. This study demonstrated the potential application of T. aotearoense SCUT27 for ethanol and butanol production from low cost cane molasses.

CONCLUSIONS

Our work provided strategies for sucrose utilization in thermophiles and improved biofuels production as well as stress tolerances of T. aotearoense SCUT27, demonstrating the potential application of the strain for cost-effective biofuels production from sucrose-based feedstocks.

Efficient butyrate production from rice straw in an optimized cathodic electro-fermentation process

Butyrate production from renewable biomass shows great potential against climate change and over-consumption of fossil fuels. Herein, key operational parameters of a cathodic electro-fermentation (CEF) process were optimized for efficient butyrate production from rice straw by mixed culture. The cathode potential, controlled pH and initial substrate dosage were optimized at -1.0 V (vs Ag/AgCl), 7.0 and 30 g/L, respectively. Under the optimal conditions, 12.50 g/L butyrate with yield of 0.51 g/g-rice straw were obtained in batch-operated CEF system. In fed-batch mode, butyrate production significantly increased to 19.66 g/L with the yield of 0.33 g/g-rice straw, but 45.99% butyrate selectivity still needs to be improved in future. Enriched butyrate producing bacteria (Clostridium cluster XIVa and IV) with proportion of 58.75% on the 21st day of the fed-batch fermentation, contributed to the high-level butyrate production. The study provides a promising approach for efficient butyrate production from lignocellulosic biomass.

De novo biosynthesis of butyl butyrate in engineered Clostridium tyrobutyricum

Butyl butyrate has broad applications in foods, cosmetics, solvents, and biofuels. Microbial synthesis of bio-based butyl butyrate has been regarded as a promising approach recently. Herein, we engineered Clostridium tyrobutyricum ATCC 25755 to achieve de novo biosynthesis of butyl butyrate from fermentable sugars. Through introducing the butanol synthetic pathway (enzyme AdhE2), screening alcohol acyltransferases (AATs), adjusting transcription of VAAT and adhE2 (i.e., optimizing promoter), and efficient supplying butyryl-CoA, an excellent engineered strain, named MUV3, was obtained with ability to produce 4.58 g/L butyl butyrate at 25 °C with glucose in serum bottles. More NADH is needed for butyl butyrate synthesis, thus mannitol (the more reduced substrate) was employed to produce butyl butyrate. Ultimately, 62.59 g/L butyl butyrate with a selectivity of 95.97%, and a yield of 0.21 mol/mol was obtained under mannitol with fed-batch fermentation in a 5 L bioreactor, which is the highest butyl butyrate titer reported so far. Altogether, this study presents an anaerobic fermentative platform for de novo biosynthesis of butyl butyrate in one step, which lays the foundation for butyl butyrate biosynthesis from renewable biomass feedstocks.

Elimination of carbon catabolite repression through gene-modifying a solventogenic Clostridium sp. strain WK to enhance butanol production from the galactose-rich red seaweed

With the determination of the Leloir pathway in a solventogenic wild-type strain WK through the transcriptional analysis, two pivotal genes (galK and galT) were systematically co-expressed to demonstrate a significantly enhanced galactose utilization for butanol production with the elimination of carbon catabolite repression (CCR). The gene-modified strain WK-Gal-4 could effectively co-utilize galactose and glucose by directly using an ultrasonication-assisted butyric acid-pretreated Gelidium amansii hydrolysate (BAU) as the substrate, exhibiting the optimal sugar consumption and butanol production from BAU of 20.31 g/L and 7.8 g/L with an increment by 62.35 % and 61.49 % over that by strain WK, respectively. This work for the first time develops a feasible approach to utilizing red algal biomass for butanol fermentation through exploring the metabolic regulation of carbohydrate catabolism, also offering a novel route to develop the future biorefinery using the cost-effective and sustainable marine feedstocks.

Construction of Clostridium tyrobutyricum strain and ionic membrane technology combination pattern for refinery final molasses recovery and butyric acid production

Introduction

Clostridium tyrobutyricum has considerable prospect in the production of organic acids. Globally, refinery final molasses is rich in sugar and reported to have high levels of accumulation and high emission costs, recognized as an excellent substrate for C. tyrobutyricum fermentation, but there is no suitable method available at present.

Methods

In this study, an acid-base treatment combined with a new green membrane treatment technology - a dynamic ion-exchange membrane -was used to pretreat refinery final molasses, so that it could be used for C. tyrobutyricum to produce butyric acid. A high-performance liquid chromatography method was established to determine the conversion of a large amount of sucrose into fermentable sugars (71.88 g/L glucose and 38.06 g/L fructose) in the treated refinery final molasses. The process of sequential filtration with 3, 1, and 0.45 μm-pore diameter dynamic ion-exchange membranes could remove impurities, pigments, and harmful substances from the refinery final molasses, and retain the fermentable sugar.

Results and discussion

This means that refinery final molasses from the sugar industry could be utilized as a high-value by-product and used for the growth of C. tyrobutyricum, with industrial feasibility and economic competitiveness. Using the treated refinery final molasses as a carbon source, C. tyrobutyricum was screened by the method of adaptive evolution. The strain with butyric acid yielded 52.54 g/L, and the yield of the six carbon sugar was increased from 0.240 to 0.478 g/g. The results showed that combination of C. tyrobutyricum and ionic membrane technology broke through the bottleneck of its utilization of refinery final molasses. This study provided an innovative idea for the C. tyrobutyricum fermentation to produce butyric acid.

Deciphering of the Mannitol Metabolism Pathway in Clostridium tyrobutyricum ATCC 25755 by Comparative Transcriptome Analysis

Clostridium tyrobutyricum has great potential for bio-based chemicals and biofuel production from mannitol; however, the mannitol metabolic pathway and its metabolic regulatory mechanism have not been elucidated. To this end, the RNA-seq analysis on the mid-log growth phase of C. tyrobutyricum grown on mannitol or xylose was performed. Comparative transcriptome analysis and co-transcription experiment indicated that mtlARFD, which encodes the mannitol-specific IIA component, transcription activator, mannitol-specific IIBC components, and mannitol-1-phosphate 5-dehydrogenase, respectively, formed a polycistronic operon and could be responsible for mannitol uptake and metabolism. In addition, comparative genomic analysis of the mtlARFD organization and the MtlR protein structural domain among various Firmicutes strains identified the putative cre (catabolite-responsive element) sites and conserved phosphorylation sites, but whether the expression of mannitol operon was affected by CcpA- and MtlR-mediated metabolic regulation during mixed substrate fermentation needs to be further verified experimentally. Based on the gene knockout and complementation results, the predicted mannitol operon mtlARFD was confirmed to be responsible for mannitol utilization in C. tyrobutyricum. The results of this study could be used to enhance the mannitol metabolic pathway and explore the potential metabolic regulation mechanism of mannitol during mixed substrate fermentation.

Model-based driving mechanism analysis for butyric acid production in Clostridium tyrobutyricum

Background

Butyric acid, an essential C4 platform chemical, is widely used in food, pharmaceutical, and animal feed industries. Clostridium tyrobutyricum is the most promising microorganism for industrial bio-butyrate production. However, the metabolic driving mechanism for butyrate synthesis was still not profoundly studied.

Results

This study reports a first-generation genome-scale model (GEM) for C. tyrobutyricum, which provides a comprehensive and systematic analysis for the butyrate synthesis driving mechanisms. Based on the analysis in silico, an energy conversion system, which couples the proton efflux with butyryl-CoA transformation by two redox loops of ferredoxin, could be the main driving force for butyrate synthesis. For verifying the driving mechanism, a hydrogenase (HydA) expression was perturbed by inducible regulation and knockout. The results showed that HydA deficiency significantly improved the intracellular NADH/NAD+ rate, decreased acetate accumulation (63.6% in serum bottle and 58.1% in bioreactor), and improved the yield of butyrate (26.3% in serum bottle and 34.5% in bioreactor). It was in line with the expectation based on the energy conversion coupling driving mechanism.

Conclusions

This work show that the first-generation GEM and coupling metabolic analysis effectively promoted in-depth understanding of the metabolic driving mechanism in C. tyrobutyricum and provided a new insight for tuning metabolic flux direction in Clostridium chassis cells.

The Physiological Functions of AbrB on Sporulation, Biofilm Formation and Carbon Source Utilization in Clostridium tyrobutyricum

As a pleiotropic regulator, Antibiotic resistant protein B (AbrB) was reported to play important roles in various cellular processes in Bacilli and some Clostridia strains. In Clostridium tyrobutyricum, abrB (CTK_C 00640) was identified to encode AbrB by amino acid sequence alignment and functional domain prediction. The results of abrB deletion or overexpression in C. tyrobutyricum showed that AbrB not only exhibited the reported characteristics such as the negative regulation on sporulation, positive effects on biofilm formation and stress resistance but also exhibited new functions, especially the negative regulation of carbon metabolism. AbrB knockout strain (Ct/ΔabrB) could alleviate glucose-mediated carbon catabolite repression (CCR) and enhance the utilization of xylose compared with the parental strain, resulting in a higher butyrate titer (14.79 g/L vs. 7.91 g/L) and xylose utilization rate (0.19 g/L·h vs. 0.02 g/L·h) from the glucose and xylose mixture. This study confirmed the pleiotropic regulatory function of AbrB in C. tyrobutyricum, suggesting that Ct/ΔabrB was the potential candidate for butyrate production from abundant, renewable lignocellulosic biomass mainly composed of glucose and xylose.

Systematic engineering of Bacillus amyloliquefaciens for efficient production of poly-γ-glutamic acid from crude glycerol

Microbial production of poly-γ-glutamic acid (γ-PGA) from non-food raw materials is a promising alternative to food feedstocks-based biosynthesis. A superior cell factory of Bacillus amyloliquefaciens for the efficient synthesis of γ-PGA from crude glycerol was constructed through systematic metabolic engineering. Firstly, some phase-dependent promoters were screened from B. amyloliquefaciens, which can be used for fine regulation of subsequent metabolic pathways. Secondly, the glycerol utilization pathway and the γ-PGA synthesis pathway were co-optimized utilizing the above-screened promoters, which increased the titer of γ-PGA by 1.75-fold. Then, the titer of γ-PGA increased to 15.6 g/L by engineering transcription factors degU and blocking competitive pathways. Finally, combining these strategies with an optimized fermentation process, 26.4 g/L γ-PGA was obtained from crude glycerol as a single carbon source (a 3.72-fold improvement over the initial strain). Overall, these strategies will have great potential for synthesizing other products from crude glycerol in B. amyloliquefaciens.

Elimination of carbon catabolite repression in Clostridium tyrobutyricum for enhanced butyric acid production from lignocellulosic hydrolysates

Clostridium tyrobutyricum, a gram-positive anaerobic bacterium, is recognized as the promising butyric acid producer. But, the existence of carbon catabolite repression (CCR) is the major drawback for C. tyrobutyricum to efficiently use the lignocellulosic biomass. In this study, the xylose pathway genes were first identified and verified. Then, the potential regulatory mechanisms of CCR in C. tyrobutyricum were proposed and the predicted engineering targets were experimental validated. Inactivation of hprK blocked the CcpA-mediated CCR and resulted in simultaneous conversion of glucose and xylose, although xylose consumption was severe lagging behind. Deletion of xylR further shortened the lag phase of xylose utilization. When hprK and xylR were inactivated together, the CCR in C. tyrobutyricum was completely eliminated. Consequently, ATCC 25755/ΔhprKΔxylR showed significant increase in butyrate productivity (1.8 times faster than the control) and excellent butyric acid fermentation performance using both mixed sugars (11.0-11.9 g/L) and undetoxified lignocellulosic hydrolysates (12.4-13.4 g/L).

Efficient molasses utilization for low-molecular-weight poly-γ-glutamic acid production using a novel Bacillus subtilis stain

Background

Poly-γ-glutamic acid (γ-PGA) is a biopolymer and has various applications based on its biocompatibility, non-toxicity, and edibility. Low-molecular-weight (Mw)-γ-PGA has promising applications in agriculture and pharmaceuticals. It is traditionally produced by enzymatic hydrolysis. Cost-effective bioproduction of low-Mw-γ-PGA is essential for commercial application of γ-PGA.

Results

Bacillus subtilis 242 is a newly isolated low-Mw-γ-PGA-producing strain. To develop cost-effective production of γ-PGA using this newly isolated strain, cane molasses and corn steep liquor were used to produce γ-PGA. The concentration of cane molasses was optimized and 100 g/L cane molasses resulted in high γ-PGA production. The effects of yeast extract and corn steep liquor on γ-PGA yield were investigated. High concentration of γ-PGA was obtained in the medium with corn steep liquor. A concentration of 32.14 g/L γ-PGA was achieved in fed-batch fermentation, with a productivity of 0.67 g/L/h and a percentage yield (g_γ-PGA/g_glutamate) of 106.39%. The Mw of γ-PGA was 27.99 kDa.

Conclusion

This study demonstrated the potential application of B. subtilis 242 for cost-effective production of low-Mw-γ-PGA from cane molasses.

Microbial cell factories for the production of three-carbon backbone organic acids from agro-industrial wastes

At present, mass production of basic and valuable commodities is dependent on linear petroleum-based industries, which ultimately makes the depletion of finite natural reserves and accumulation of non-biodegradable and hazardous wastes. Therefore, an ecofriendly and sustainable solution should be established for a circular economy where infinite resources, such as agro-industrial wastes, are fully utilized as substrates in the production of target value-added chemicals. Hereby, recent advances in metabolic engineering strategies and techniques used in the development of microbial cell factories for enhanced production of three-carbon platform chemicals such as lactic acid, propionic acid, and 3-hydroxypropionic acid are discussed. Further developments and future perspectives in the production of these organic acids from agro-industrial wastes from the dairy, sugar, and biodiesel industries are also highlighted to demonstrate the importance of waste-based biorefineries for organic acid production.

Butanol production from Saccharina japonica hydrolysate by engineered Clostridium tyrobutyricum: The effects of pretreatment method and heat shock protein overexpression

Macroalgal biomass is currently considered as a potential candidate for biofuel production. In this study, the effects of pretreatment method and heat shock protein overexpression were investigated for efficient butanol production from Saccharina japonica using engineered Clostridium tyrobutyricum. First, various pretreatment methods including acid hydrolysis, acid hydrolysis and enzymatic saccharification, and ultrasonic-assisted acid hydrolysis were employed to obtain the fermentable sugars, and the resulted hydrolysates were evaluated for butanol fermentation. The results showed that ultrasonic-assisted acid hydrolysate obtained the highest butanol yield (0.26 g/g) and productivity (0.19 g/L⋅h). Then, the effects of homologous or heterologous heat shock protein overexpression on butanol production and tolerance were examined. Among all the engineered strains, Ct-pMA12G exhibited improved butanol tolerance and enhanced butanol production (12.15 g/L butanol with a yield of 0.34 g/g and productivity of 0.15 g/L⋅h) from 1.8-fold concentrated S. japonica hydrolysate, which was the highest level ever reported for macroalgal biomass.

A cathodic electro-fermentation system for enhancing butyric acid production from rice straw with a mixed culture

Bio-electrochemical system (BES) emerges as a versatile approach to handling environmental problems with the harvest of sustainable energy and value-added chemicals. To enhance the butyric acid production from rice straw, microbial fuel cell (MFC) and cathodic electro-fermentation (CEF) systems were constructed in this study. Inoculated with the same mixed culture, fermentative butyric acid production efficiency of the two BESs were evaluated with/without neutral red (NR) as electron mediator, respectively. It was found that the butyric acid fermentation efficiency in the MFC system was inefficient. While, the CEF system presented an evident positive effect on butyric acid production. The production and specific yield of butyric acid in the CEF system reached 5.54 g/L and 0.41 g/g, higher than that in the open circuit (OC) system by 17.37% and 28.13%, respectively. Mass percentage of butyric acid in the produced total volatile fatty acids (VFAs) was also increased from 44.74% to 52.76%. The addition of NR had no positive effect on the butyric acid production, due to the low contribution of electric current to the end-products. With the cathode potential of -0.80 V (vs Ag/AgCl), relative abundance of the butyric acid fermenting bacteria (Clostridium cluster IV and cluster XIVa) in the microbial mixture was increased from 20.25% in the OC system to 33.61% in the CEF system. This research work not only presents a novel method for enhancing butyric acid production by rice straw fermentation, but also aids an understanding of the fermentation mechanism in CEF systems.

Microbial engineering for the production of C2-C6 organic acids

Covering: up to the end of 2020Organic acids, as building block compounds, have been widely used in food, pharmaceutical, plastic, and chemical industries. Until now, chemical synthesis is still the primary method for industrial-scale organic acid production. However, this process encounters some inevitable challenges, such as depletable petroleum resources, harsh reaction conditions and complex downstream processes. To solve these problems, microbial cell factories provide a promising approach for achieving the sustainable production of organic acids. However, some key metabolites in central carbon metabolism are strictly regulated by the network of cellular metabolism, resulting in the low productivity of organic acids. Thus, multiple metabolic engineering strategies have been developed to reprogram microbial cell factories to produce organic acids, including monocarboxylic acids, hydroxy carboxylic acids, amino carboxylic acids, dicarboxylic acids and monomeric units for polymers. These strategies mainly center on improving the catalytic efficiency of the enzymes to increase the conversion rate, balancing the multi-gene biosynthetic pathways to reduce the byproduct formation, strengthening the metabolic flux to promote the product biosynthesis, optimizing the metabolic network to adapt the environmental conditions and enhancing substrate utilization to broaden the substrate spectrum. Here, we describe the recent advances in producing C₂-C₆ organic acids by metabolic engineering strategies. In addition, we provide new insights as to when, what and how these strategies should be taken. Future challenges are also discussed in further advancing microbial engineering and establishing efficient biorefineries.

Effects of benzyl viologen on increasing NADH availability, acetate assimilation, and butyric acid production by Clostridium tyrobutyricum

Clostridium tyrobutyricum produces butyric and acetic acids from glucose. The butyric acid yield and selectivity in the fermentation depend on NADH available for acetate reassimilation to butyric acid. In this study, benzyl viologen (BV), an artificial electron carrier that inhibits hydrogen production, was used to increase NADH availability and butyric acid production while eliminating acetic acid accumulation by facilitating its reassimilation. To better understand the mechanism of and find the optimum condition for BV effect on enhancing acetate assimilation and butyric acid production, BV at various concentrations and addition times during the fermentation were studied. Compared with the control without BV, the addition of 1 μM BV increased butyric acid production from glucose by ∼50% in yield and ∼29% in productivity while acetate production was completely inhibited. Furthermore, BV also increased the coutilization of glucose and exogenous acetate for butyric acid production. At a concentration ratio of acetate (g/L) to BV (mM) of 4, both acetate assimilation and butyrate biosynthesis increased with increasing the concentrations of BV (0-6.25 μM) and exogenous acetate (0-25 g/L). In a fed-batch fermentation with glucose and ∼15 g/L acetate and 3.75 μM BV, butyrate production reached 55.9 g/L with productivity 0.93 g/L/h, yield 0.48 g/g, and 97.4% purity, which would facilitate product purification and reduce production cost. Manipulating metabolic flux and redox balance via BV and acetate addition provided a simple to implement metabolic process engineering approach for butyric acid production from sugars and biomass hydrolysates.

Recent advances in n-butanol and butyrate production using engineered Clostridium tyrobutyricum

Acidogenic clostridia naturally producing acetic and butyric acids has attracted high interest as a novel host for butyrate and n-butanol production. Among them, Clostridium tyrobutyricum is a hyper butyrate-producing bacterium, which re-assimilates acetate for butyrate biosynthesis by butyryl-CoA/acetate CoA transferase (CoAT), rather than the phosphotransbutyrylase-butyrate kinase (PTB-BK) pathway widely found in clostridia and other microbial species. To date, C. tyrobutyricum has been engineered to overexpress a heterologous alcohol/aldehyde dehydrogenase, which converts butyryl-CoA to n-butanol. Compared to conventional solventogenic clostridia, which produce acetone, ethanol, and butanol in a biphasic fermentation process, the engineered C. tyrobutyricum with a high metabolic flux toward butyryl-CoA produced n-butanol at a high yield of > 0.30 g/g and titer of > 20 g/L in glucose fermentation. With no acetone production and a high C4/C2 ratio, butanol was the only major fermentation product by the recombinant C. tyrobutyricum, allowing simplified downstream processing for product purification. In this review, novel metabolic engineering strategies to improve n-butanol and butyrate production by C. tyrobutyricum from various substrates, including glucose, xylose, galactose, sucrose, and cellulosic hydrolysates containing the mixture of glucose and xylose, are discussed. Compared to other recombinant hosts such as Clostridium acetobutylicum and Escherichia coli, the engineered C. tyrobutyricum strains with higher butyrate and butanol titers, yields and productivities are the most promising hosts for potential industrial applications.