Biodegradation of Congo red dye in a moving bed biofilm reactor: Performance evaluation and kinetic modeling

An overview of recent advances in treatment of complex dye-containing wastewater and its techno-economic assessment

Industries such as textiles, polymers, pharmaceuticals, papers, and tanneries are the key contributors to the global economy. These industries utilize various types of synthetic dyes in their processes, leading to discharge of dyes-contaminated wastewater. The wastewater generally contains various types of dyes (such as methyl orange, congo red, malachite green, etc.), which have a detrimental impact on the ecosystem and human health due to their toxic, carcinogenic, and mutagenic nature. As the result, it is crucial to treat the dyes-contaminated wastewater to protect the environment and render it suitable for reuse, mitigating the escalating global demand for clean water. This review provides a comprehensive overview of dyes and their treatment technologies (i.e., physical, chemical, and biological treatment). Among various treatment methods, the biological treatment is widely employed due to its energy efficiency and eco-friendliness. However, biological treatment faces challenges such as slow processing rates and limited effectiveness in handling low-biodegradability pollutants (BOD5/COD <0.2). This review also highlighted recent advancements in treatment technologies and explored the emerging integrated treatment method that aims to achieve higher removal efficiency for a low biodegradability index dye-contaminated wastewater. Additionally, a techno-economic assessment is presented, analyzing the cost-effectiveness of the emerging technologies in real-world applications. Further, the critical research gaps and future outlooks are also discussed. Overall, the review aims to contribute to the ongoing efforts to improve wastewater treatment processes and promote sustainable water management practices.

Regulating the Surface State of Carbon Dots as Ultrahigh-Capacity Adsorbents for Water Treatment

Adsorption is one of the most widely researched and highly effective methods for mitigating the environmental threat posed by recalcitrant dyes in aqueous solutions. This paper presents a solvent-free synthesis method for the rapid and large-scale production of nitrogen (N) and phosphorus (P) co-doped carbon dots (N, P-CDs) which possess specific surface states and outstanding dye adsorption properties. Compared to the undoped CDs, the N, P-CDs not only exhibit a higher yield of solid-state luminescence but also endow them with the efficient adsorption and removal of Congo red (CR) from water. Due to the synergistic effects of π-π stacking, hydrogen bonding and electrostatic attraction, the N, P-CDs exhibit an ultra-high adsorption capacity (3118.87 mg g-1) and a removal efficiency (97.4%, at 500 mg L-1) for CR, and also display excellent selective adsorption in both single-dye and dual-dye systems. This method offers a rational strategy for synthesizing novel CDs-based adsorbents for CR, which provides a demonstration for future dye adsorption studies and practical wastewater treatment applications of CDs.

Bioremediation of azo dye: A review on strategies, toxicity assessment, mechanisms, bottlenecks and prospects

The synthetic azo dyes are widely used in the textile industries for their excellent dyeing properties. They may be classified into many classes based on their structure and application, including direct, reactive, dispersive, acidic, basic, and others. The continuous discharge of wastewater from a large number of textile industries without prior treatment poses detrimental effects on the environment and human health. Azo dyes and their degradation products are extremely poisonous for their carcinogenic, teratogenic and mutagenic nature. Moreover, exposure to synthetic azo dyes can cause genetic changes, skin inflammation, hypersensitivity responses, and skin irritations in persons, which may ultimately result in other profound issues including the deterioration of water quality. This review discusses these dyes in details along with their detrimental effects on aquatic and terrestrial flora and fauna including human beings. Azo dyes degrade the water bodies by increasing biochemical and chemical oxygen demand. Therefore, dye-containing wastewater should be effectively treated using eco-friendly and cost-effective technologies to avoid negative impact on the environment. This article extensively reviews on physical, chemical and biological treatment with their benefits and challenges. Biological-based treatment with higher hydraulic retention time (HRT) is economical, consumes less energy, produces less sludge and environmentally friendly. Whereas the physical and chemical methods with less hydraulic retention time is costly, produces large sludge, requires high dissolved oxygen and ecologically inefficient. Since, biological treatment is more advantageous over physical and chemical methods, researchers are concentrating on bioremediation for eliminating harmful azo dye pollutants from nature. This article provides a thorough analysis of the state-of-the-art biological treatment technologies with their developments and effectiveness in the removal of azo dyes. The mechanism by which genes encoding azoreductase enzymes (azoG, and azoK) enable the natural degradation of azo dyes by bacteria and convert them into less harmful compounds is also extensively examined. Therefore, this review also focuses on the use of genetically modified microorganisms and nano-technological approaches for bioremediation of azo dyes.

A review on the application of biochar as an innovative and sustainable biocarrier material in moving bed biofilm reactors for dye removal from environmental matrices

Dye decolorization through biological treatment techniques has been gaining momentum as it is based on suspended and attached growth biomass in both batch and continuous modes. Hence, this review focused on the contribution of moving bed biofilm reactors (MBBR) in dye removal. MBBR have been demonstrated to be an excellent technology for pollution extraction, load shock resistance, and equipment size and energy consumption reduction. The review went further to highlight different biocarrier materials for biofilm development this review identified biochar as an innovative and environmentally friendly material produced through the application of different kinds of reusable or recyclable wastes and biowastes. Biochar as a carbonized waste biomass could be a better competitor and environmentally friendly substitute to activated carbon given its lower mass costs. Biochar can be easily produced particularly in rural locations where there is an abundance of biomass-based trash. Given that circular bioeconomy lowers dependency on natural resources by turning organic wastes into an array of useful products, biochar empowers the creation of competitive goods. Thus, biochar was identified as a novel, cost-effective, and long-term management strategy since it brings about several essential benefits, including food security, climate change mitigation, biodiversity preservation, and sustainability improvement. This review concludes that integrating two treatment methods could greatly lead to better color, organic matter, and nutrients removal than a single biological MBBR treatment process.

Sodium alginate based adsorbent: Facile fabrication, extraordinary removal efficacy of anionic dyes and adsorption mechanism

Eco-friendly and renewable sodium alginate, as a potential alternative to fossil resources, has attracted considerable attention in wastewater treatment field. Herein, we develop a SA/PEI/PEG (sodium alginate/polyethyleneimine/polyethylene glycol diglycidyl ether) adsorbent in which SA was functionalized by PEI/PEG via a facile but effective strategy of one-pot gelation of aqueous SA/PEI/PEG solution. Systematic investigations were accomplished to explore the effects of adsorbent factors on the adsorption performances of the adsorbent towards the anionic dyes CR (congo red), AB-10B (amido black-10B), and AB-25 (acid blue-25). Strikingly, the SA/PEI/PEG exhibited exceptional adsorption performance to CR (2782 mg g-1, 90.6 %), AB-10B (1369 mg g-1, 90.9 %) and AB-25 (4221 mg g-1, 92.6 %) at 30 °C, pH = 3, 200 r min-1 and oscillated 24 h, and demonstrating exceptional reusability after six cycles of adsorption-desorption cycles. Furthermore, the three kinetic, four isothermic and one thermodynamic models were used to investigate the adsorption behaviors of the adsorbent towards these dyes. The possible adsorption mechanism is suggested: Hydrogen bond interactions and electrostatic attractions between SA/PEI/PEG and the dyes primarily contribute to exceptional adsorption capacity. The SA/PEI/PEG adsorbent endowed with easy fabrication, extraordinary adsorption capacity and excellent reusability promises potential application prospects in wastewater purification industry.

Sequential use of a continuous-flow electrocoagulation reactor and a (photo)electro-Fenton recirculation system for the treatment of Acid Brown 14 diazo dye

The decolorization and TOC removal of solutions of Acid Brown 14 (AB14) diazo dye containing 50 mg L-1 of total organic carbon (TOC) have been first studied in a continuous-flow electrocoagulation (EC) reactor of 3 L capacity with Fe electrodes of ∼110 cm2 area each. Total loss of color with poor TOC removal was found in chloride, sulfate, and/or hydrogen carbonate matrices after 18 min of this treatment. The best performance was found using 5 anodes and 4 cathodes of Fe at 13.70 A and low liquid flow rate of 10 L h-1, in aerated 39.6 mM NaCl medium within a pH range of 4.0-10.0. The effluent obtained from EC was further treated by electro-Fenton (EF) using a 2.5 L pre-pilot flow plant, which was equipped with a filter-press cell comprising a Pt anode and an air-diffusion cathode for H2O2 electrogeneration. Operating with 0.10-1.0 mM Fe2+ as catalyst at pH 3.0 and 50 mA cm-2, a similar TOC removal of 68 % was found as maximal in chloride and sulfate media using the sequential EC-EF process. The EC-treated solutions were also treated by photoelectro-Fenton (PEF) employing a photoreactor with a 125 W UVA lamp. The sequential EC-PEF process yielded a much higher TOC reduction, close to 90 % and 97 % in chloride and sulfate media, respectively, due to the rapid photolysis of the final Fe(III)-carboxylate complexes. The formation of recalcitrant chloroderivatives from generated active chlorine limited the mineralization in the chloride matrix. For practical applications of this two-step technology, the high energy consumption of the UVA lamp in PEF could be reduced by using free sunlight.

Biodegradation and detoxification study of triphenylmethane dye (Brilliant green) in a recirculating packed-bed bioreactor by bacterial consortium

In the last few decades, Brilliant green (BG) dye is widely employed to colour the fabric materials in various industries (e.g. textile, pulp and paper, etc.). The wastewater containing BG dye emerges as a major challenge among the researchers due to its toxic, mutagenic, and carcinogenic effects on human beings and marine life. In this context, the present study is mainly focused on the biodegradation of BG dye present in wastewater. The biodegradation of BG dye was performed in an indigenously designed recirculating packed bed bioreactor (RPBBR). Modified Polypropylene-Polyurethane foam (PP-PUF), a support packing material, was immobilised with a newly isolated bacterial consortium of Enterobacter asburiae strain SG43 (BGT1) and Alcaligenes sp. SY1 (BGT2). The bioreactor was operated under various organic loading rates (OLRs) of 2.7, 1.27, 0.93, 0.71, and 0.53 kg COD/m3.d-1 with a hydraulic retention time (HRT) of 4 days. The bioreactor exhibited the maximum BG dye removal efficiency of 91%. Proton Nuclear Magnetic Resonance (1H NMR), UV-Vis spectroscopy, Gas chromatography-mass spectrometry (GC-MS), and Fourier Transform Infrared Spectroscopy (FTIR) depicted the biodegradation of BG dye. Phaseolus mungo seeds germinated in BG dye biodegraded wastewater was significantly high (83.56%) than the untreated wastewater (32.4%), which was reasonably subjected to the detoxification of treated wastewater.

A synergistic approach combining Adsorption and Biodegradation for effective treatment of Acid Blue 113 dye by Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel Beads

This study investigated the degradation of Acid Blue 113 (AB 113) dye using Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel beads (KG-GO-CA) in a Fluidized Bed Bioreactor (FBBR) under varying inlet loading rates. The minimum fluidization velocity of the KG-GO-CA hydrogel beads in FBBR was found to be 0.15 mm/s. The KG-GO-CA beads showed a maximum removal efficiency of 94.6% at an inlet flow rate of 20 mL/h over 15 days. Reusability studies indicated a removal efficiency of 70.6 ± 2.5% for AB 113 after the 12th cycle. Langmuir adsorption isotherm showed the best fit (R2 = 0.98724) with model parameters of Qm (203.83 mg/g) and Ki (0.0101 L/g). The study also confirmed that treated wastewater was more environmentally safe for domestic and commercial uses than untreated wastewater. The research highlights the potential use of KG-GO-CA hydrogel beads for removing dyes from wastewater.

Recent progress in the production and application of biochar and its composite in environmental biodegradation

Over the past few decades, extensive research has been conducted to develop cost-effective and high-quality biochar for environmental biodegradation purposes. Pyrolysis has emerged as a promising method for recovering biochar from biomass and waste materials. This study provides an overview of the current state-of-the-art biochar production technology, including the advancements and biochar applications in organic pollutants remediation, particularly wastewater treatment. Substantial progress has been made in biochar production through advanced thermochemical technologies. Moreover, the review underscores the importance of understanding the kinetics of pollutant degradation using biochar to maximize its synergies for potential environmental biodegradation. Finally, the study identifies the technological gaps and outlines future research advancements in biochar production and its applications for environmental biodegradation.

Mathematical modeling for operative improvement of the decoloration of Acid Red 27 by a novel microbial consortium of Trametes versicolor and Pseudomonas putida: A multivariate sensitivity analysis

In this work, it is presented a first approach of a mathematical and kinetic analysis for improving the decoloration and further degradation process of an azo dye named acid red 27 (AR27), by means of a novel microbial consortium formed by the fungus Trametes versicolor and the bacterium Pseudomonas putida. A multivariate analysis was carried out by simulating scenarios with different operating conditions and developing a specific mathematical model based on kinetic equations describing all stages of the biological process, from microbial growth and substrate consuming to decoloration and degradation of intermediate compounds. Additionally, a sensitivity analysis was performed by using a factorial design and the Response Surface Method (RSM), for determining individual and interactive effects of variables like, initial glucose concentration, initial dye concentration and the moment in time for bacterial inoculation, on response variables assessed in terms of the minimum time for: full decoloration of AR27 (R1 = 2.375 days); maximum production of aromatic metabolites (R2 = 1.575 days); and full depletion of aromatic metabolites (R3 = 12.9 days). Using RSM the following conditions improved the biological process, being: an initial glucose concentration of 20 g l-1, an initial AR27 concentration of 0.2 g l-1 and an inoculation moment in time of P. putida at day 1. The mathematical model is a feasible tool for describing AR27 decoloration and its further degradation by the microbial consortium of T. versicolor and P. putida, this model will also work as a mathematical basis for designing novel bio-reaction systems than can operate with the same principle of the described consortium.

Biodegradation of Congo Red Dye Using Lysinibacillus Species in a Moving Bed Biofilm Reactor: Continuous Study and Kinetic Evaluation

The objective of this work was to develop a low-cost and efficient biocarrier for biodegradation of azo dye (i.e., Congo red (CR) dye). The potential bacterial species, i.e., Lysinibacillus fusiformis KLM1 and Lysinibacillus macrolides KLM2, were isolated from the dye-contaminated site. These bacterial species were immobilized onto the polypropylene-polyurethane foam (PP-PUF) and employed in a moving bed biofilm reactor (MBBR) for the treatment of CR dye. The effectiveness of the MBBR was investigated by operating the bioreactor in a continuous mode at various initial CR dye concentrations (50-250 mg/L) for 113 days. The removal efficiency was found in the range of 88.4-64.6% when the initial dye concentration was varied from 50 to 250 mg/L. The maximum elimination capacity (EC) of 213.18 mg/L.d was found at 250 mg/L of CR dye concentration. In addition, the CR dye utilization rate in the MBBR was studied by using two kinetics, namely, first-order and second-order (Grau) models. The high regression coefficients (R2 > 0.97) and the satisfactory root mean square (RMSE) values (0.00096-0.02610) indicated the reasonable prediction of CR dye degradation rate by the Grau model.

Biodegradation of di(2-ethylhexyl) phthalate by a new bacterial consortium

Di(2-ethylhexyl) phthalate (DEHP) with continuous high concentration was used as the sole carbon and energy source to isolate a new bacterial consortium (K1) from agricultural soil covered with plastic film for a long time. Unclassified Comamonadaceae, Achromobacter, and Pseudomonas in K1 were identified as major genera of the consortium by high-throughput sequencing, and unclassified Commanadaceae was first reported to be related to DEHP degradation. Response surface method (RSM) showed that the optimum conditions for K1 to degrade DEHP were 31.4 °C, pH 7.3, and a concentration of 420 mg L^-1. K1 maintains normal cell viability and stable DEHP degradation efficiency in the range of 10-3000 mg L^-1 DEHP concentration, which is superior to existing research. The biodegradation of DEHP followed first-order kinetics when the initial concentration of DEHP was between 100 and 3,000 mg L^-1. GC-MS analysis of different treatment groups showed that DEHP was degraded by the consortium group through the de-esterification pathway, and treatment effect was significantly better than that of the single bacteria treatment group. The subsequent substrate utilization experiment further confirmed that K1 could quickly mineralize DEHP. In addition, K1 has high degradation capacity for the most common phthalate acid esters in the environment.

Designed Construction of 2D Honeycomb Cationic MOF Materials for Selective Removal of Sulfonic Anionic Dyes

Various carcinogenic dyes in water bodies are difficult to degrade due to their stability to light and oxidants, causing extended pollution. In this study, MOF 1 ({[Co(tib)₂]·(H₂O)₂·SO₄}_n) and MOF 2 ({[Cu(tib)₂]·(H₂O)₂·SO₄}_n) (tib = 1,3,5-tirs(1-imidazolyl)benzene) were synthesized by the solvothermal method. MOFs 1 and 2 were successfully characterized by single-crystal X-ray diffraction (XRD) and powder X-ray diffraction (PXRD). Based on the structural characteristics of MOFs 1 and 2, we designed two cationic MOF material skeletons, namely, MOFs I and II ([Co(tib)₂²⁺]_n and [Cu(tib)₂²⁺]_n), which were obtained by calcination in combination with the thermogravimetric curve to remove the free components in the lattice. As expected, MOFs I and II showed an excellent adsorption effect on sulfonic anionic dyes. Notably, the adsorption capacity of MOF I can reach 2922.8 mg g^-1 for Congo Red (CR) at room temperature (RT). The adsorption process fits the pseudo-second-order kinetic model and Freundlich isotherm model. Moreover, zeta potential tests and quantum chemical calculations indicate that electrostatic interactions and hydrogen bond between the hydroxyl group on the sulfonic acid group and the N atom on the imidazole ring mainly promote the adsorption of CR dyes on MOF I. MOFs I and II are revealed as a promising novel adsorption material to remove hazardous organic aromatic pollutants with high efficiency in future endeavors.

Assessment of biodegradation kinetics and mass transfer aspects in attached growth bioreactor for effective treatment of Brilliant green dye from wastewater

In this study, Bacillus licheniformis immobilized with low-density polyethylene (LDPE) was employed to degrade Brilliant Green (BG) dye from wastewater in a packed bed bioreactor (PBBR). Bacterial growth and extracellular polymeric substance (EPS) secretion were also assessed under different concentrations of BG dye. The impacts of external mass transfer resistance on BG biodegradation were also evaluated at different flow rates (0.3 - 1.2 L/h). A new mass transfer correlation [Formula: see text] was proposed to study the mass transfer aspects in attached-growth bioreactor. The intermediates, namely 3- dimethylamino phenol, benzoic acid, 1-4 benzenediol, and acetaldehyde were identified during the biodegradation of BG and, subsequently degradation pathway was proposed. Han - Levenspiel kinetics parameters μ_max and K_s were found to be 0.185 per day and 115 mg/L, respectively. The new insight into mass transfer and kinetics support the design of efficiently attached growth bioreactor to treat a wide range of pollutants.

Microbial biosorbent for remediation of dyes and heavy metals pollution: A green strategy for sustainable environment

Toxic wastes like heavy metals and dyes are released into the environment as a direct result of industrialization and technological progress. The biosorption of contaminants utilizes a variety of biomaterials. Biosorbents can adsorb toxic pollutants on their surface through various mechanisms like complexation, precipitation, etc. The quantity of sorption sites that are accessible on the surface of the biosorbent affects its effectiveness. Biosorption’s low cost, high efficiency, lack of nutrient requirements, and ability to regenerate the biosorbent are its main advantages over other treatment methods. Optimization of environmental conditions like temperature, pH, nutrient availability, and other factors is a prerequisite to achieving optimal biosorbent performance. Recent strategies include nanomaterials, genetic engineering, and biofilm-based remediation for various types of pollutants. The removal of hazardous dyes and heavy metals from wastewater using biosorbents is a strategy that is both efficient and sustainable. This review provides a perspective on the existing literature and brings it up-to-date by including the latest research and findings in the field.

Removal of the Pigment Congo Red from Synthetic Wastewater with a Novel and Inexpensive Adsorbent Generated from Powdered Foeniculum Vulgare Seeds

In this research, powdered Foeniculum vulgare seed (FVSP) was treated separately with H2C2O4, ZnCl2, and a mixture of ZnCl2-CuS. The characteristics of the treated and untreated FVSP samples, as well as their abilities to eliminate Congo red (CR) from solutions, were investigated. The influences of the empirical circumstances on CR adsorption by the ideal adsorbent were studied. The thermodynamic, isothermal, and dynamic constants of this adsorption were also inspected. The ideal adsorbent was found to be the FVSP sample treated with a ZnCl2-CuS mixture, which eliminated 96.80% of the CR dye. The empirical outcomes proved that this adsorption was significantly affected by the empirical circumstances, and the second-order dynamic model as well as the Langmuir isotherm model fit the empirical data better than the first-order model and the Freundlich model. The values of Ea (15.3 kJ/mol) and ∆Ho (32.767 kJ/mol ≤ ∆Ho ≤ 35.495 kJ/mol) evidence that CR anions were endothermally adsorbed on Zn/Cu-FVSP via the ionic exchange mechanism. The superior Qmax values (434.78, 625.00, 833.33 mg/g), along with the cheapness and stability of the adsorbent used in this work, are evidence to confirm that this adsorbent will receive special interest in the field of contaminated water purification.

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

In this work, natural biopolymer stemming from lignocellulosic peanut hull biomass was used as a green and low-cost adsorbent to eliminate anionic Congo red (CR) and Cr(VI) ions from aqueous sample. In order to enhance the removal performance, the lignocellulosic biopolymer was subjected to amino-modification by the graft copolymerization of (3-acrylamidopropyl) trimethylammonium chloride and N, N'-methylenebisacrylamide. The property of the prepared amino-functionalized biopolymer (AFB) was examined through FTIR, TG, SEM, particle size analysis, zeta potential determination and XPS. The adsorption efficacy of AFB for CR and Cr(VI) was tested at different pH, contact time and initial concentration. The kinetic, isotherm and thermodynamics investigations revealed that the uptakes of CR and Cr(VI) were the combination processes of chemical and physical interactions, and both endothermic in nature. The AFB exhibited good reusability without significant loss in adsorption capacity after five consecutive cycles. Mechanistic analysis indicated that the quaternary ammonium groups in AFB contributed a lot to the binding of anionic compounds through electrostatic attraction. In addition, n-π and hydrogen bonding while reduction and coordination were also responsible for the removal of CR and Cr(VI), respectively. The present study provides a favorable strategy for the removal of anionic contaminates in water by using green and sustainable lignocellulosic wastes.

A sustainable remediation of Congo red dye using magnetic carbon nanodots and B. pseudomycoides MH229766 composite: mechanistic insight and column modelling studies

In the present investigation, a biocomposite, magnetic carbon nanodot immobilized Bacillus pseudomycoides MH229766 (MCdsIB) was developed and consequently characterized using SEM-EDX, FTIR, XRD, and VSM analyses to effectively biotreat hazardous Congo red (CR) dye present in water bodies. The adsorptive efficiency of MCdsIB for the detoxification of CR from wastewater was investigated both in batch and column schemes. Optimum batch parameters were found as pH 3, 50 mg L-1 dye concentration, 150 min equilibrium time, and 2 g L-1 MCdsIB dosage. The Freundlich isotherm model best fit the experimental data, and the maximum adsorption capacity of MCdsIB was observed as 149.25 mg g-1. Kinetic data were in accordance with the pseudo-second-order model where the adsorption rate reduced with the rise in the initial concentration of dye. Intra-particle diffusion was discovered as the rate-limiting step following 120 min of the adsorption process. Furthermore, despite being used continually for five consecutive cycles, MCdsIB demonstrated excellent adsorption capacity (> 85 mg g-1), making it an outstanding recyclable material. The CR dye was efficiently removed in fixed-bed continuous column studies at high influent CR dye concentration, low flow rate, and high adsorbent bed height, wherein the Thomas model exhibited an excellent fit with the findings acquired in column experiments. To summarize, the current study revealed the effectiveness of MCdsIB as a propitious adsorbent for CR dye ouster from wastewater.

A comprehensive evaluation of the integrated photocatalytic-fixed bed bioreactor system for the treatment of Acid Blue 113 dye

This work investigated the performance of the integrated system (i.e., a Photocatalytic reactor followed by a Fixed bed bioreactor (PC-FBR)) for the degradation of complex Acid Blue 113 from wastewater. Initially, a Photocatalytic reactor was employed to improve the biodegradability index (i.e., BOD/COD) of wastewater from 0.21 ± 0.0062 to 0.395 ± 0.0058. The preliminary photocatalytic oxidation study revealed a maximum of 86.42 ± 0.33 % dye removal at TiO2 loading of 1.5 g/L and an initial concentration of 50 mg/L of AB 113. An integrated reactor system significantly achieved a maximum of 92 ± 2.6 % of dye removal efficiency under a retention time of 120 hr. The stand-alone FBR dye shock loading study suggested that the reactor system was reasonably able to further restore its degradation efficiency. Langmuir-Hinshelwood kinetic model, Monod model, and Andrew-Haldane model were fitted. The bacterial toxicity assessment was carried out using the Pseudomonas fluorescens.

Adsorption Properties of Modified ATP-RGO Composite Aerogel for Removal of Malachite Green and Methyl Orange from Unitary and Binary Aqueous Solutions

In this paper, the modified attapulgite-reduced graphene oxide composite aerogel (ATP-RGO CA) was prepared by sol-gel method using modified attapulgite as silica source. The removal of the cationic dye malachite green (MG) and azo dye methyl orange (MO) onto ATP-RGO CA from unitary and binary systems was investigated. Morphology and microstructure studies of ATP-RGO CA were investigated by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and specific surface area and porosity analysis. Experiments were carried out as a function of pH, contact time, initial dye concentration, and temperature in unitary and binary systems. The adsorption kinetics, isotherms, thermodynamics, and dye desorption were studied in unitary and binary dye systems. The adsorption kinetics was modeled using the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics equations. The equilibrium adsorption data of MG and MO dyes on ATP-RGO CA were analyzed. Thermodynamic parameters of dye adsorption were obtained. In addition, the regeneration of ATP-RGO CA was studied using dye desorption in unitary and binary dye systems. The adsorption kinetics of the dyes followed pseudo-second-order kinetics. The results indicate that the Langmuir model provides the best correlation of the experimental data. The thermodynamic studies showed that the dye adsorption onto ATP-RGO CA was a spontaneous and endothermic reaction. High desorption of MG and MO showed the regeneration of ATP-RGO CA. It can be concluded that ATP-RGO CA is suitable as an adsorbent material to remove MG and MO dyes from unitary and binary systems.

In situ fabrication of porous biochar reinforced W18O49 nanocomposite for methylene blue photodegradation

In this paper, a novel cow dung based activated carbon (CDAC) was successfully modified by W18O49 nanowires as a photocatalyst using KOH activation and a hydrothermal method. The activity of photocatalytic degradation of methylene blue (MB) under full-spectrum light illumination shows great improvement, and the degradation rate of MB could reach 98% after 240 min (67% for W18O49), with a final degradation rate of 98%. The porous structure with specific surface area of CDAC (∼479 m2 g-1) increases the adsorption of W18O49 reactants and also raises the concentration of reactants in the photocatalytic region. The high electrical conductivity and good electron storage capacity of CDAC allow the electrons excited in the conduction band (CB) of W18O49 to migrate smoothly into CDAC, which are the keys to enhancing the photocatalytic activity. Moreover, the photocatalytic mechanism was proposed. The results show that the CDAC/W18O49 nanowire composite can be used as an efficient photocatalyst for removal of MB dye from wastewater and indicate remarkable future potential in dye wastewater treatment technologies.

Effect of mixing intensity on biodegradation of phenol in a moving bed biofilm reactor: Process optimization and external mass transfer study

In this work, an effort has been made to design the process variables and to analyse the impact of mixing intensity on mass transfer diffusion in a moving bed biofilm reactor (MBBR). A lab-scale MBBR, filled with Bacillus cereus GS2 IIT (BHU) immobilized-polyethylene biocarriers, was employed to optimize the process variables, including mixing intensity (60-140 rpm), phenol concentration (50-200 mg/L), and hydraulic retention time (HRT) (4-24 h) using response surface methodology. The optimum phenol removal of 87.64 % was found at 100 rpm of mixing intensity, 200 mg/L of phenol concentration, and 24 h of HRT. The higher mixing intensity improved the substrate diffusion between the liquid phase and the surface of the biofilm. The external mass transfer coefficients were found in the range of 1.431 × 10^-5-1.845 × 10^-5 m/s. Moreover, the detection of catechol and 2-hydroxymuconic semialdehyde revealed that the Bacillus sp. followed the meta-cleavage pathway during the biodegradation of phenol.

Enhancement of wastewater treatment performance using 3D printed structures: A major focus on material composition, performance, challenges, and sustainable assessment

In order to enhance the performance and sustainability of wastewater treatment technologies, researchers are showing keen interest in the development of novel materials which can overcome the drawbacks associated with conventional materials. In this context, 3D printing gained significant attention due to its capability of fabricating complex geometrics using different material compositions. The present review focuses on recent advancements of 3D printing applications in various physicochemical and biological wastewater treatment techniques. In physicochemical treatment methods, substantial research has been aimed at fabricating feed spacers and other membrane parts, photocatalytic feed spacers, catalysts, scaffolds, monoliths, and capsules. Several advantages, such as membrane fouling mitigation, enhanced degradation efficiency, and recovery and reusability potential, have been associated with the aforementioned 3D printed materials. While in biofilm-based biological treatment methods, the use of 3D printed bio-carriers has led to enhanced mass transfer efficiency and microbial activities. Moreover, the application of these bio-carriers has shown better removal efficiency of chemical oxygen demand (∼90%), total nitrogen (∼73%), ammonia nitrogen (95%), and total phosphorous (∼100%). Although the removal efficiencies were comparable with conventional carriers, 3D printed carriers led to ∼40% reduction in hydraulic retention time, which could significantly save capital and operational expenditures. This review also emphasizes the challenges and sustainability aspects of 3D printing technology and outlines future recommendations which could be vital for further research in this field.

Green synthesis of zinc oxide nanoparticles loaded on activated carbon prepared from walnut peel extract for the removal of Eosin Y and Erythrosine B dyes from aqueous solution: experimental approaches, kinetics models, and thermodynamic studies

Water contamination due to release of dye containing effluents is one of the environmental problems of serious concern today. The present study investigate the green synthesis of zinc oxide nanoparticles (ZnO-NPs) doped on activated carbon (AC) prepared from walnut peel extract and to estimate its efficiency in the removal of Eosin Y (Eo-Y) and Erythrosine B (Er-B) from its aqueous solution. The synthesized AC-ZnO was identified by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and the Brunauer-Emmett-Teller. The influence of various parameters such as pH, dosage of AC-ZnO, contact time, and concentrations of Eo-Y and Er-B was also studied. The pH 3 was observed as the optimum pH while the equilibrium was noticed to reach in 30 min at dosage of 1 g/L and initial concentration 100 mg/L for Eo-Y and Er-B adsorption onto AC-ZnO. The maximum adsorption capacity of Eo-Y and Er-B onto AC-ZnO was found to be 163.9 and 144.92 mg/g (and removal efficiencies of 95.11 and 98.31 %), respectively. The process of Eo-Y and Er-B adsorption on AC-ZnO was observed to be depended on the pseudo-second-order kinetic model which indicates chemisorption processes. Langmuir adsorption isotherm model test described the removal of Eo-Y and Er-B on AC-ZnO. The thermodynamic data indicated that the adsorption was endothermic process. Also, the values, S_BET and V_TOTAL, for the AC-ZnO were equal to 725.65 m²/g and 0.6004 cm³/g, respectively. The results of this study exhibited that AC-ZnO was a very effective method that can be used for the removal of Eo-Y and Er-B from aqueous solutions.

Current perspective of innovative strategies for bioremediation of organic pollutants from wastewater

Organic contaminants in water are a growing environmental threat to sustainable development, with detrimental effects on the biosphere. In recent years, researchers have increasingly focused their attention on the area of bioremediation as an important tool to eliminate harmful pollutants from the environment. This review examines the application of bioremediation technologies to the removal of organic pollutants, with an emphasis on hydrocarbons and textile dyes. It applies a descriptive bibliometric analysis to study statistical practicality-vs-applicability of bioremediation of emerging organic pollutants. The paper identifies efficient pathways for bioremediation of different types of organic pollutants and outlines the potential for an eco-friendly and economical approach for the biological remediation of micropollutants by microalgae. Facts and figures on various hazardous pollutants, constraints in their current removal from water at an industrial level, and promising future solutions are carefully presented here.

A comprehensive review on MXenes as new nanomaterials for degradation of hazardous pollutants: Deployment as heterogeneous sonocatalysis

MXene-based nanomaterials (MBNs) are two-dimensional materials that exhibit a series of sought after properties, including rich surface chemistry, adjustable bandgap structures, high electrical conductivity, hydrophobicity, thermal stability, and large specific surface area. MBNs have an exemplar performance when applied for the degradation of hazardous pollutants with various advanced oxidation processes such as heterogeneous sonocatalysis. As such, this work focuses on the sonocatalytic degradation of various hazardous pollutants using MXene-based catalysts. First, the general principles of sonocatalysis are examined, followed by an analysis of the main components of the MXene-based sonocatalysts and their application for pollutant degradation. Lastly, ongoing challenges are highlighted with recommendations to address the issues.

Facile Synthesis of Cobalt Ferrite (CoFe2O4) Nanoparticles in the Presence of Sodium Bis (2-ethyl-hexyl) Sulfosuccinate and Their Application in Dyes Removal from Single and Binary Aqueous Solutions

A research study was conducted to establish the effect of the presence of sodium bis-2-ethyl-hexyl-sulfosuccinate (DOSS) surfactant on the size, shape, and magnetic properties of cobalt ferrite nanoparticles, and also on their ability to remove anionic dyes from synthetic aqueous solutions. The effect of the molar ratio cobalt ferrite to surfactant (1:0.1; 1:0.25 and 1:0.5) on the physicochemical properties of the prepared cobalt ferrite particles was evaluated using different characterization techniques, such as FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption analysis, and magnetic measurements. The results revealed that the surfactant has a significant impact on the textural and magnetic properties of CoFe₂O₄. The capacity of the synthesized CoFe₂O₄ samples to remove two anionic dyes, Congo Red (CR) and Methyl Orange (MO), by adsorption from aqueous solutions and the factors affecting the adsorption process, such as contact time, concentration of dyes in the initial solution, pH of the media, and the presence of a competing agent were investigated in batch experiments. Desorption experiments were performed to demonstrate the reusability of the adsorbents.

Construction of integrated system for the treatment of Acid orange 7 dye from wastewater: Optimization and growth kinetic study

In this work, an effort has been made to develop an integrated system (ozonation followed by biodegradation) for the treatment of Acid orange 7 (AO 7) dye. The process parameters such as pH (3.0-11) and ozone dosage (5-25 mg/L) were optimized and obtained as 3.0 and 25 mg/L, respectively to treat the AO 7 by ozonation. Similarly, the process parameters, namely pH (5.0-9.0) and temperature (25-45 °C) were optimized and found to be 7.0 and 35 °C, respectively by biological treatment. Bacillus sp. was found to be the most effective bacteria to remove the AO 7. An integrated system obtained an overall 98.7% removal of AO 7 under optimum conditions. Andrews-Haldane model was best to predict the experimental data and the bio-kinetic constants; µ_max: 0.1875 day^-1; K_s: 49.53 mg/L; K_i: 133.32 mg/L were obtained. The developed integrated system can be a promising option for the treatment of azo dye containing-wastewaters.

A detailed insight on fabricated porous chitosan in eliminating synthetic anionic dyes from single and multi-adsorptive systems with related studies

Chitosan was fabricated via gelation method using CaBr₂.xH₂O/methanol solution and was studied as a potential adsorbent (MCh) in adsorbing anionic synthetic dyes like Bromophenol blue (BB), Direct blue 6 (DB) and Congo red (CR) from single (one dye species at a time) and multi (having two dyes; binary and all three dyes; tertiary) adsorptive systems. Physico-chemical modifications of MCh surface prior and post modification and dye adsorption were evaluated using scanning electron microscopy, Energy-dispersive X-ray spectroscopy, powder X-ray diffraction analysis, surface area analysis and Fourier-transformed infrared spectroscopy. Influential parameters influencing the adsorption process viz. initial pH of dye solution, MCh dosage, adsorption temperature and initial concentration of dye species were optimised. Adsorptive studies involving single adsorptive setups verified formation of sorbate's (dye species) monolayer over the sorbent's (MCh) surface via chemisorption; as established by Langmuir isotherm and pseudo-second order kinetics model analysis. Theoretical maximum adsorption capacities of MCh for BB, DB and CR was found to be 81.301 mg/g, 163.934 mg/g and 75.758 mg/g, respectively. Meanwhile, for all multi-adsorptive systems, competitive Langmuir isotherm model verified antagonistic behaviour of an individual dye over other dye adsorption over MCh surface in their respective adsorptive systems. Thermodynamics of the sorbate-sorbent interaction was exothermic, spontaneous, with elevated degree of disorderedness; concluding the interaction as thermodynamically favourable. Co-existing metal cations and anionic salts had minimal effect on MCh's adsorption efficiency. Phytotoxicity assay via germination of Vigna mungo seeds verified the efficacy of the adsorbent in eliminating the dye species from single and multi-adsorptive systems.

Adsorptive removal of eriochrome black T (EBT) dye by using surface active low cost zinc oxide nanoparticles: A comparative overview

The ecological toxicity imparted by non-biodegradable organic dyes has been considered as a major risk to handle in front of mankind. In this view, the low-cost zinc oxide nanoparticles (ZnO-NPs) were facially synthesized by coating the surface with surfactant (CTAB) and ionic liquid (BMTF) molecules for the effective removal of Eriochrome Black T (EBT) from aqueous media. Various advanced characterization techniques have given insight into the morphological features, crystalline structure and physio-chemical properties of as-synthesized ZnO-NPs. The systematic analysis of the adsorption isotherms and kinetics models specifies that the adsorption of EBT follow Freundlich model and pseudo-second-order kinetics. The intraparticle diffusion model displayed a linear relationship (R² = 0.98, 0.97 and 0.94 for BMTF@ZnO, CTAB@ZnO and bare ZnO-NPs), which shows that pore diffusion rate is affected by surface modification and effects the overall EBT adsorption process. Furthermore, after the removal of 87% and 84% of EBT dye by BMTF@ZnO-NPs and CTAB@ZnO-NPs, the fabricated nanoadsorbents of ZnO were successfully regenerated and reused after the treatments up to four times. The adsorption aptitude of ZnO-NPs towards EBT dye was systematically explored in real wastewater samples and interference study of inorganic metallic salts was also performed. The toxicity estimations of the treated dye solutions were made using floral and fungal activities, to ascertain their non-toxic nature before releasing into the environment. These outcomes have supported the immense potential of ZnO-NPs towards the removal of EBT in a cost effective manner.

Elimination of Congo Red Dye from Industrial Wastewater Using Teucrium polium L. as a Low-Cost Local Adsorbent

A novel adsorbent prepared from the leaf powder of Teucrium polium L. (TPLLP) was characterized and its ability for adsorption of Cong red (CR) was inspected. Influences of CR concentration, adsorbent dosage, time of agitation, pH of solution, and temperature on the performance of this adsorption were also examined. Three models of kinetic along with three different isotherm models were applied for analyzing the empirical data of this adsorption. Additionally, the thermodynamic constants of were decided. The surface area, pore volume, pore size, and pHZPC of Zn/Cu-TPLLP were found to be 2.6436 m2.g-1, 0.013317 cm3.g-1, 527.393 Å, and 8.8, respectively. The achieved outcomes indicate the positive influence of temperature, concentration of CR in the range of 20 to 900 mg/L, adsorbent mass in the range of 0.005 to 0.02 g, time of adsorption from 0 to 120 min, and pH from 5.5 to 8.5. Models of the 2nd order with $R^2\ge 0.995$ and Langmuir with $R^2\ge 0.990$ were the best among the other kinetic and isotherm models applied in this research. Moreover, superior capacities of 526.32, 666.67, and 909.09 (mg.g-1) were stemmed at 27, 42, and 57°C, respectively. The outcomes of the thermodynamic evidenced that this adsorption is spontaneous and a heat absorber.

Simulating the synergy of electron donors and different redox mediators on the anaerobic decolorization of azo dyes: Can AQDS-chitosan globules replace the traditional redox mediators?

During anaerobic treatment of azo dye wastewater, the decolorization efficiency is low and dissolved redox mediators (RMs) added to the system are easy lost. In order to solve these issues, immobilized RMs have been a hot area of research. In this study a novel immobilized RM material, disodium anthraquinone-2,6-disulfonate (AQDS)-chitosan globules, which is natural, highly efficient and environmentally friendly, was prepared. Compared with natural immobilized RMs (activated carbon) and dissolved RMs (AQDS), it can be considered that it has a significant strengthening effect on the anaerobic biological degradation and decolorization of azo dye wastewater. An electron donor (ED, glucose) or RM (AQDS solution) was dosed into an anaerobic reactor to determine the enhancing effect and appropriate concentration for the decolorization treatment. The results indicate that a certain concentration of ED or RM [300 mg/L (1.667 mmol/L) glucose or 200 μmol/L AQDS solution] can improve effectively the anaerobic biological degradation and decolorization effect of azo dye wastewater. While by adding both 300 mg/L (1.667 mmol/L) glucose and 300 μmol/L AQDS (the concentrations were the initial reactive concentrations) together the decolorization efficiency was improved further. At the same time, the synergy of ED (glucose) and RM (AQDS solution) on the anaerobic decolorization of azo dye was simulated by the central combination design. A mathematical model for the decolorization efficiency has been established. According to this model, the hydraulic retention time of the best decolorization speed and efficiency has been obtained.

Strategy for the advanced treatment of simulated tail water of dyeing wastewater based on a short-cut photocatalysis/algal degradation hybrid technology

Refractory organic pollutants in tail water of dyeing wastewater treatment have aroused wide concern. Their efficient and cost-effective removal reduced their threat to public health and ecosystem. Herein, a novel short-cut photocatalysis/algal degradation-based hybrid technology was implemented in efficient removal of methylene blue (MB) in simulated tail water using reliable titanium dioxide and common Chlorella pyrenoidosa, and the mechanisms in processes were emphasized. The treatment efficiency was significantly improved via pretreatment before chemical and biological degradation. MB of 79.71% was concentrated as the adsorption of the modified titanium dioxide and the collection of titanium dioxide by inorganic coagulant. The supernatant with low concentration of MB after coagulation was able to be directly treated by Chlorella pyrenoidosa. MB of 93.7% was degraded and transformed to intermediates in short-cut photocatalysis under visible light in 1 h. The intermediates owning the low biological inhibition were easily further degraded by Chlorella pyrenoidosa in 6 days. Mechanism analysis implied that the modified titanium dioxide was not simple monolayer adsorption, and physical adsorption was dominant. The coagulant played an essential role of charge neutralization in collection of the modified titanium dioxide. The removal of photocatalytic intermediates was divided to fast adsorption of Chlorella pyrenoidosa, low desorption in lag period of algae, and gradual biodegradation that accompanied with the increase of algal cell quantity.

Recent Achievements in Dyes Removal Focused on Advanced Oxidation Processes Integrated with Biological Methods

In the last 3 years alone, over 10,000 publications have appeared on the topic of dye removal, including over 300 reviews. Thus, the topic is very relevant, although there are few articles on the practical applications on an industrial scale of the results obtained in research laboratories. Therefore, in this review, we focus on advanced oxidation methods integrated with biological methods, widely recognized as highly efficient treatments for recalcitrant wastewater, that have the best chance of industrial application. It is extremely important to know all the phenomena and mechanisms that occur during the process of removing dyestuffs and the products of their degradation from wastewater to prevent their penetration into drinking water sources. Therefore, particular attention is paid to understanding the mechanisms of both chemical and biological degradation of dyes, and the kinetics of these processes, which are important from a design point of view, as well as the performance and implementation of these operations on a larger scale.

Abdel Mageid R, Radwan EK, Khattab TA, Olson MA, El Malah T. Adsorption isotherms and kinetic studies for the removal of toxic reactive dyestuffs from contaminated water using a viologen-based covalent polymer

A polyviologen-based adsorbent was prepared via polymerization of a viologen-dialdehyde with a hydroxyl-substituted aryl-dihydrazide in acidified water.

Surface treated acid-activated carbon for adsorption of anionic azo dyes from single and binary adsorptive systems: A detail insight

Current study deals with the surface modification of acid activated carbon (prepared from Pongamia pinnata shells) with Cetyltrimethylammonium bromide (CTAB) and its role as an adsorbent in eliminating anionic azo dyes viz. Congo red (CR) and Direct blue 6 (DB) from single and binary adsorptive systems. Binary adsorptive system involved the synergistic and antagonistic influence of one dye over the adsorption of other dye. Physico-chemical alterations due to surfactant modification and post adsorption were studied using atomic force microscopy (AFM), Zeta Potential, scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), surface area analysis and Fourier-transformed infrared spectroscopy (FTIR). Process parameters influencing efficient adsorption of CR and DB species viz. initial pH of dye solution, adsorbent dosage, incubation temperature and initial concentration of dye species were optimised. Sorbate-sorbent interaction studies for single adsorptive system revealed sorbate's monolayer formation over adsorbent's surface and the involvement of chemisorption, as verified by Langmuir isotherm model and pseudo-second order model, respectively. Langmuir maximum adsorption capacity of the adsorbent was 555.56 mg/g for CR and 625.00 mg/g for DB. Meanwhile, for binary adsorptive system, competitive Langmuir model verified both CR and DB had antagonistic/competitive effect over each other's adsorption. Thermodynamic analysis revealed the adsorptive process as exothermic, spontaneous and thermodynamically favourable with an elevated degree of dis-orderedness. Co-existing cations and anions has nominal effect on the adsorption capacity of dyes. Recyclability studies verified a modest efficiency of 62.52% for CR and 50.47% for DB species after the end of 4th adsorption-desorption cycle; thus affirming its recyclability potential. Phytotoxic assay affirmed the effectivity of the adsorbent in adsorbing dye species from aqueous solutions using Vigna mungo seeds as the model.

Removal of methylene blue dye using rice husk, cow dung and sludge biochar: Characterization, application, and kinetic studies

The present studies aimed for the removal of Methylene blue (MB) dye using the rice husk biochar (RHB), cow dung biochar (CDB) and domestic sludge biochar (SB) synthesized through slow pyrolysis at 500 °C. The biochar was used for the adsorption of synthetic aqueous MB dye. The removal efficiencies of MB by CDB, RHB and SB in a batch experiment were 97.0-99.0; 71.0-99.0 and 73.0-98.9% at conditions, pH (2.0-11.0); Biochar dosage (0.5-6.0 g/100 mL) for 5 days. Adsorption isotherm of Langmuir constant (K_L) were obtained 0.101, 0.583 and 0.128 for RHB, CDB and SB respectively. Further, adsorption kinetics of pseudo first order for RHB, CDB and SB were 0.068, 0.018, and 0.066 while it was 0.031, 0.023 and 0.273 for pseudo second order kinetics. Thus, CDB was more effective adsorbent for the dye removal. The pHz values were 7.8, 6.3 and 6.0 for the CDB, RHB, and SB, respectively.