Natural pigments from microalgae grown in industrial wastewater

Resource recovery and valorization of food wastewater for sustainable development: An overview of current approaches

The food processing industry is one of the world's largest consumers of potable water. Agri-food wastewater systems consume about 70% of the world's fresh water and cause at least 80% of deforestation. Food wastewater is characterized by complex composition, a wide range of pollutants, and fluctuating water quality, which can cause huge environmental pollution problems if discharged directly. In recent years, food wastewater has attracted considerable attention as it is considered to have great prospects for resource recovery and reuse due to its rich residues of nutrients and low levels of harmful substances. This review explored and compared the sources and characteristics of different types of food wastewater and methods of wastewater treatment. Particular attention was paid to the different methods of resource recovery and reuse of food wastewater. The diversity of raw materials in the food industry leads to different compositional characteristics of wastewater, which determine the choice and efficiency of wastewater treatment methods. Physicochemical methods, and biological methods alone or in combination have been used for the efficient treatment of food wastewater. Current approaches for recycling and reuse of food wastewater include culture substrates, agricultural irrigation, and bio-organic fertilizers, recovery of high-value products such as proteins, lipids, biopolymers, and bioenergy to alleviate the energy crisis. Food wastewater is a promising substrate for resource recovery and reuse, and its valorization meets the current international policy requirements regarding food waste and environment protection, follows the development trend of the food industry, and is also conducive to energy conservation, emission reduction, and economic development. However, more innovative biotechnologies are necessary to advance the effectiveness of food wastewater treatment and the extent of resource recovery and valorization.

The Experimental Development of Emulsions Enriched and Stabilized by Recovering Matter from Spirulina Biomass: Valorization of Residue into a Sustainable Protein Source

Spirulina consists of a cluster of green-colored cyanobacteria; it is commonly consumed as a food or food supplement rich in bioactive compounds with antioxidant activity, predominantly C-phycocyanin (C-PC), which is related to anti-inflammatory action and anticancer potential when consumed frequently. After C-PC extraction, the Spirulina residual biomass (RB) is rich in proteins and fatty acids with the potential for developing food products, which is interesting from the circular economy perspective. The present work aimed to develop a vegan oil-in-water emulsion containing different contents of Spirulina RB, obtaining a product aligned with current food trends. Emulsions with 3.0% (w/w) of proteins were prepared with different chickpea and Spirulina RB ratios. Emulsifying properties were evaluated regarding texture and rheological properties, color, antioxidant activity, and droplet size distribution. The results showed that it was possible to formulate stable protein-rich emulsions using recovering matter rich in protein from Spirulina as an innovative food ingredient. All the concentrations used of the RB promoted the formulation of emulsions presenting interesting rheological parameters compared with a more traditional protein source such as chickpea. The emulsions were also a source of antioxidant compounds and maintained the color for at least 30 days after production.

Phycobiliprotein recovery coupled to the tertiary treatment of wastewater in semi-continuous photobioreactors. Tracking contaminants of emerging concern

This study evaluated a tertiary wastewater treatment technology using cyanobacteria to recover value-added phycobiliproteins. The presence of contaminants of emerging concern (CECs) in wastewater, cyanobacteria biomass and pigments recovered were also analyzed. For this, a wastewater-borne cyanobacterium (Synechocystis sp. R2020) was used to treat secondary effluent from a municipal wastewater treatment plant, with and without nutrients supplementation. Then, the stability of phycobiliprotein production was assessed by operating the photobioreactor in semi-continuous mode. Results showed similar biomass productivity with and without nutrients supplementation (153.5 and 146.7 mg L^-1 d^-1, respectively). Upon semi-continuous operation, the phycobiliprotein content was stable and reached up to 74.7 mg gDW^-1. The phycocyanin purity ratio ranged from 0.5 to 0.8, corresponding to food grade (> 0.7). Out of 22 CECs detected in secondary effluent, only 3 were present in the phycobiliprotein extract. In order to identify applications, prospective research should focus on CECs removal during pigment purification.

Heavy metal tolerance in microalgae: Detoxification mechanisms and applications

The proficiency of microalgae to resist heavy metals has potential to be beneficial in resolving various environmental challenges. Global situations such as the need for cost-effective and ecological ways of remediation of contaminated water and for the development of bioenergy sources could employ microalgae. In a medium with the presence of heavy metals, microalgae utilize different mechanisms to uptake the metal and further detoxify it. Biosorption and the next process of bioaccumulation are two such major steps and they also include the assistance of different transporters at different stages of heavy metal tolerance. This capability has also proved to be efficient in eradicating many heavy metals like Chromium, Copper, Lead, Arsenic, Mercury, Nickel and Cadmium from the environment they are present in. This indicates the possibility of the application of microalgae as a biological way of remediating contaminated water. Heavy metal resistance quality also allows various microalgal species to contribute in the generation of biofuels like biodiesel and biohydrogen. Many research works have also explored the capacity of microalgae in nanotechnology for the formation of nanoparticles due to its relevant characteristics. Various studies have also revealed that biochar deduced from microalgae or a combination of biochar and microalgae can have wide applications specially in deprivation of heavy metals from an environment. This review focuses on the strategies adopted by microalgae, various transporters involved in the process of tolerating heavy metals and the applications where microalgae can participate owing to its ability to resist metals.

Enhanced production of bioactive compounds from marine microalgae Tetraselmis tetrathele under salinity and light stresses: A two-stage cultivation strategy

This study leveraged the salinity and light intensity stresses during the stationary phase for enhancing the pigment contents and antioxidant capacity of Tetraselmis tetrathele. The highest pigments content was obtained in cultures under salinity stress (40 g L^-1) illuminated using fluorescent light. Furthermore, the best inhibitory concentration (IC₅₀) for scavenging the 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals was found as 79.53 µg mL^-1 in ethanol extract and cultures under red LED light stress (300 µmol m^-2 s^-1). The highest antioxidant capacity in a ferric-reducing antioxidant power (FRAP) assay (1,778.6 µM Fe⁺²) was found in ethanol extract and cultures under salinity stress illuminated using fluorescent light. Maximum scavenging of the 2.2-diphenyl-1-picrylhydrazyl (DPPH) radical was found in ethyl acetate extracts under light and salinity stresses. These results indicated that abiotic stresses could enhance the pigment and antioxidant components of T. tetrathele, which are value-added compounds in the pharmaceutical, cosmetic, and food industries.

Wastewater from textile digital printing as a substrate for microalgal growth and valorization

This study aims at evaluating an innovative biotechnological process for the concomitant bioremediation and valorization of wastewater from textile digital printing technology based on a microalgae/bacteria consortium. Nutrient and colour removal were assessed in lab-scale batch and continuous experiments and the produced algae/bacteria biomass was characterized for pigment content and biomethane potential. Microbial community analysis provided insight of the complex community structure responsible for the bioremediation action. Specifically, a community dominated by Scenedesmus spp. and xenobiotic and dye degrading bacteria was naturally selected in continuous photobioreactors. Data confirm the ability of the microalgae/bacteria consortium to grow in textile wastewater while reducing the nutrient content and colour. Improvement strategies were eventually identified to foster biomass growth and process performances. The experimental findings pose the basis of the integration of a microalgal-based process into the textile sector in a circular economy perspective.

Biopigments of Microbial Origin and Their Application in the Cosmetic Industry

Along with serving as a source of color, many microbial pigments have gained attention as interesting bioactive molecules with potential health advantages. These pigments have several applications in the food, agrochemical, medicine, and cosmetic industries. They have attracted the attention of these industries due to their high production value, low cost, stability, and biodegradability. Recently, many consumers worldwide have noted the impact of synthetic dyes; thus, natural pigments are more in demand than synthetic colors. On the other hand, the cosmetic industry has been moving toward greener manufacturing, from the formulation to the packaging material. Microbial pigments have several applications in the field of cosmetics due to their photoprotection, antioxidant, and antiaging properties, including inhibiting melanogenesis and acting as natural colorants for cosmetics, as some microorganisms are rich in pigments. More investigations are required to estimate the safety and efficacy of employing microbial pigments in cosmetic products. Furthermore, it is necessary to obtain information about DNA sequencing, metabolic pathways, and genetic engineering. In addition, unique habitats should be explored for novel pigments and new producing strains. Thus, new microbial pigments could be of consideration to the cosmetic industry, as they are ideal for future cosmetics with positive health effects.

Erythroprotective Potential of Phycobiliproteins Extracted from Porphyridium cruentum

There are multiple associations between the different blood groups (ABO and RhD) and the incidence of oxidative stress-related diseases, such as certain carcinomas and COVID-19. Bioactive compounds represent an alternative to its prevention and treatment. Phycobiliproteins (PBP) are bioactive compounds present in the microalga Porphyridium cruentum and, despite its antioxidant activity, their inhibitory effect on hemolysis has not been reported. The aim of this work was to evaluate the erythroprotective potential of phycobiliproteins from P. cruentum in different blood groups. The microalga was cultured in F/2 medium under controlled laboratory conditions. Day 10 of culture was determined as the harvest point. The microalgal biomass was lyophilized and a methanolic (MetOH), Tris HCl (T-HCl), and a physiological solution (PS) ultrasound-assisted extraction were performed. Extract pigments were quantified by spectrophotometry. The antioxidant activity of the extracts was evaluated with the ABTS+•, DPPH•, and FRAP methods, finding that the main antioxidant mechanism on the aqueous extracts was HAT (hydrogen atom transfer), while for MetOH it was SET (single electron transfer). The results of the AAPH, hypotonicity, and heat-induced hemolysis revealed a probable relationship between the different antigens (ABO and RhD) with the antihemolytic effect, highlighting the importance of bio-directed drugs.

Emerging trends in the pretreatment of microalgal biomass and recovery of value-added products: A review

Microalgae are a promising source of raw material (i.e., proteins, carbohydrates, lipids, pigments, and micronutrients) for various value-added products and act as a carbon sink for atmospheric CO₂. The rigidity of the microalgal cell wall makes it difficult to extract different cellular components for its applications, including biofuel production, food and feed supplements, and pharmaceuticals. To improve the recovery of products from microalgae, pretreatment strategies such as biological, physical, chemical, and combined methods have been explored to improve whole-cell disruption and product recovery efficiency. However, the diversity and uniqueness of the microalgal cell wall make the pretreatment process more species-specific and limit its large-scale application. Therefore, advancing the currently available technologies is required from an economic, technological, and environmental perspective. Thus, this paper provides a state-of-art review of the current trends, challenges, and prospects of sustainable microalgal pretreatment technologies from a microalgae-based biorefinery concept.

Production of phycobiliproteins, bioplastics and lipids by the cyanobacteria Synechocystis sp. treating secondary effluent in a biorefinery approach

Cyanobacteria have been identified as promising organisms to reuse nutrients from waste effluents and produce valuable compounds such as lipids, polyhydroxyalkanoates (PHAs), and pigments. However, almost all studies on cyanobacterial biorefineries have been performed under lab scale and short cultivation periods. The present study evaluates the cultivation of the cyanobacterium Synechocystis sp. in a pilot scale 30 L semi-continuous photobioreactor fed with secondary effluent for a period of 120 days to produce phycobiliproteins, polyhydroxybutyrate (PHB) and lipids. To this end, the harvested biomass from the semi-continuous photobioreactor was transferred into 5 L vertical column batch photobioreactors to perform PHB and lipid accumulation under nutrient starvation. Three hydraulic retention times (HRT) (6, 8 and 10 days) were tested in the semi-continuous photobioreactor to evaluate its influence on biomass growth and microbial community. A maximum biomass concentration of 1.413 g L^-1 and maximum productivity of 173 mg L^-1 d^-1 was reached under HRT of 8 days. Microscopy analysis revealed a shift from Synechocystis sp. to Leptolyngbya sp. and green algae when HRT of 6 days was used. Continuous, stable production of phycobiliproteins in the semi-continuous photobioreactor was obtained, reaching a maximum content of 7.4%_dcw in the biomass. In the batch photobioreactors a PHB content of 4.8%_dcw was reached under 7 days of nitrogen and phosphorus starvation, while a lipids content of 44.7%_dcw was achieved under 30 days of nitrogen starvation. PHB and lipids production was strongly dependent on the amount of nutrients withdrawn from the grow phase. In the case of lipids, their production was stimulated when there was only phosphorus depletion. While Nitrogen and phosphorus limitation was needed to enhance the PHB production. In conclusion, this study demonstrates the feasibility of cultivating cyanobacteria in treated wastewater to produce bio-based valuable compounds within a circular bioeconomy approach.

Electrospinning Composites as Carriers of Natural Pigment: Screening of Polymeric Blends

Several studies have already demonstrated that electrospinning is an excellent tool for forming nano/microfibers. However, the number of parameters affecting the formation of the structures has become a great challenge, including the polymeric solutions’ rheological properties, directly affecting the morphology of the fibers formed. The present work aimed to produce polymeric composites and determine their rheological properties, comparing them to the morphology of the fibers formed by electrospinning. Also, to evaluate their potential use as the carriers of natural pigments. To this end, a distinct combination of solutions containing Chitosan/Gelatin, Chitosan/poly(ethylene) oxide (PEO) and Zein/PEO was produced and submitted to electrospinning. The sample containing zein manufactured the structures smaller in diameter (201.3 ± 58.6 nm) among those studied. Besides, it was observed that adding PEO to the solutions impacts the increase in viscosity and shear thinning behavior, guaranteeing uniformity in the structures formed. Natural pigments were successfully incorporated into the chosen zein/PEO solution, and it was observed that adding these compounds led to changes in the rheological characteristics, as expected. Nevertheless, it was possible to produce uniform fibers with diameters ranging from 665.68 ± 249.56 to 2874.44 ± 1187.40 nm, opening the possibility of using these natural pigments in biotechnological processes.

Potential use of algae for the bioremediation of different types of wastewater and contaminants: Production of bioproducts and biofuel for green circular economy

Remediation by algae is a very effective strategy for avoiding the use of costly, environmentally harmful chemicals in wastewater treatment. Recently, industries based on biomass, especially the bioenergy sector, are getting increasing attention due to their environmental acceptability. However, their practical application is still limited due to the growing cost of raw materials such as algal biomass, harvesting and processing limitations. Potential use of algal biomass includes nutrients recovery, heavy metals removal, COD, BOD, coliforms, and other disease-causing pathogens reduction and production of bioenergy and valuable products. However, the production of algal biomass using the variable composition of different wastewater streams as a source of growing medium and the application of treated water for subsequent use in agriculture for irrigation has remained a challenging task. The present review highlights and discusses the potential role of algae in removing beneficial nutrients from different wastewater streams with complex chemical compositions as a biorefinery concept and subsequent use of produced algal biomass for bioenergy and bioactive compounds. Moreover, challenges in producing algal biomass using various wastewater streams and ways to alleviate the stress caused by the toxic and high concentrations of nutrients in the wastewater stream have been discussed in detail. The technology will be economically feasible and publicly accepted by reducing the cost of algal biomass production and reducing the loaded or attached concentration of micropollutants and pathogenic microorganisms. Algal strain improvement, consortium development, biofilm formation, building an advanced cultivation reactor system, biorefinery concept development, and life-cycle assessment are all possible options for attaining a sustainable solution for sustainable biofuel production. Furthermore, producing valuable compounds, including pharmaceutical, nutraceutical and pigment contents generated from algal biomass during biofuel production, could also help reduce the cost of wastewater management by microalgae.

Therapeutic efficacy of spirulina against ovalbumin and cigarette smoke-induced asthma-specific stress biomarkers in Sprague-Dawley rats

Due to the high prevalence of allergies and asthma, awareness about allergens and therapeutic use of functional foods and nutraceuticals have gained immense attention. Spirulina powder is being used as health-boosting and antioxidant agent against several ailments owing to its unique nutritional profile. Considering its antioxidant role, the current study was focused on exploring therapeutic role of spirulina against stress biomarkers in asthmatic model. To assess the therapeutic efficacy of spirulina against allergic asthma-specific oxidative stress biomarkers, a model feed trial was conducted and rats were divided into four groups (n = 10). G_0-I (negative control), G_0-II (positive control), whereas G_I (spirulina) and G₂ (salbutamol) served as treatment groups. Salbutamol is a chemical compound which is used in several antiallergic medicines because it works as bronchodilator. G₂ group was given salbutamol for comparison of results. For asthma induction, rats were given intraperitoneal injection of ovalbumin on 7th, 14th, and 21st day. Treatment groups were given spirulina powder (500 mg/kg body weight) and salbutamol (1 mg/kg), respectively, after the induction of asthma. All three asthmatic groups were also exposed to cigarette smoke daily along with respective treatment for 4 weeks. Asthma induction caused an increase in total cell count in bronchioalveolar fluid (BALF), while spirulina treatment reduced total cells in BALF by 33.50% and salbutamol by 41.7%. Level of interleukins (IL) like IL-4 decreased by 33.32% & 48.56% in G₁ and G₂. Similarly, IL-5 and IL-13 levels reduced by 40.9% & 49.9% and 18.62% & 38.02%, respectively, in G₁ and G₂. Serum levels of Immunoglobin-E (Ig-E) declined by 29.70% and 52.82%, while histamine levels were 26.23% & 45.58% less at the end of study in comparison to positive control. Moreover, histological analysis of lung tissue revealed that both spirulina and salbutamol effectively reduced ovalbumin and cigarette smoke-induced moderate to severe necrosis, architectural changes, and congestion. It was concluded that salbutamol showed better results however, spirulina also effectively reduced mild to moderate allergic symptoms in dose-dependent manner. Nutraceutical and functional foods are considered helpful in mitigating oxidative stress-mediated health problems. Spirulina has its unique nutritional profile including phycobiliproteins, phytochemicals, and antioxidant vitamins which make it useful against several ailments. Considering its antioxidant role, current study was focused on exploring therapeutic efficacy of spirulina against stress biomarkers in asthmatic model. Outcomes of present research also demonstrated beneficial effect of spirulina in modulating allergic symptoms. In this regard, ancient concept of "medicine food homology" can be implemented and spirulina can be incorporated in food for additional benefits. However, further research regarding safety aspects is needed for its use in clinical practice for humans.

Bioproducts from microalgae biomass: Technology, sustainability, challenges and opportunities

Microalgae are a potential feedstock for several bioproducts, mainly from its primary and secondary metabolites. Lipids can be converted in high-value polyunsaturated fatty acids (PUFA) such as omega-3, carbohydrates are potential biohydrogen (bioH₂) sources, proteins can be converted into biopolymers (such as bioplastics) and pigments can achieve high concentrations of valuable carotenoids. This work comprehends the current practices for the production of such products from microalgae biomass, with insights on technical performance, environmental and economical sustainability. For each bioproduct, discussion includes insights on bioprocesses, productivity, commercialization, environmental impacts and major challenges. Opportunities for future research, such as wastewater cultivation, arise as environmentally attractive alternatives for sustainable production with high potential for resource recovery and valorization. Still, microalgae biotechnology stands out as an attractive topic for it research and market potential.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Microalgae-based wastewater treatment for developing economic and environmental sustainability: Current status and future prospects

Over the last several decades, concerns about climate change and pollution due to human activity has gained widespread attention. Microalgae have been proposed as a suitable biological platform to reduce carbon dioxide, a major greenhouse gas, while also creating commercial sources of high-value compounds such as medicines, cosmetics, food, feed, and biofuel. Industrialization of microalgae culture and valorization is still limited by significant challenges in scaling up the production processes due to economic constraints and productivity capacities. Therefore, a boost in resource usage efficiency is required. This enhancement not only lowers manufacturing costs but also enhancing the long-term viability of microalgae-based products. Using wastewater as a nutrient source is a great way to reduce manufacturing costs. Furthermore, water scarcity is one of the most important global challenges. In recent decades, industrialization, globalization, and population growth have all impacted freshwater resources. Moreover, high amounts of organic and inorganic toxins in the water due to the disposal of waste into rivers can have severe impacts on human and animal health. Microalgae cultures are a sustainable solution to tertiary and quaternary treatments since they have the ability to digest complex contaminants. This review presents biorefineries based on microalgae from all angles, including the potential for environmental pollution remediation as well as applications for bioenergy and value-added biomolecule production. An overview of current information about microalgae-based technology and a discussion of the associated hazards and opportunities for the bioeconomy are highlighted.

Microalgae-Based Biorefineries: Challenges and Future Trends to Produce Carbohydrate Enriched Biomass, High-Added Value Products and Bioactive Compounds

Simple Summary

Microalgae-based biorefineries allow the simultaneous production of microalgae biomass enriched in a particular macromolecule and high-added and low-value products if a proper selection of the microalgae species and the cultivation conditions are adequate for the purpose. This review discusses the challenges and future trends related to microalgae-based biorefineries stressing the multi-product approach and the use of raw wastewater or pretreated wastewater to improve the cost-benefit ratio of biomass and products. Emphasis is given to the production of biomass enriched in carbohydrates. Microalgae-bioactive compounds as potential therapeutical and health promoters are also discussed. Future and novel trends following the circular economy strategy are also discussed.

Abstract

Microalgae have demonstrated a large potential in biotechnology as a source of various macromolecules (proteins, carbohydrates, and lipids) and high-added value products (pigments, poly-unsaturated fatty acids, peptides, exo-polysaccharides, etc.). The production of biomass at a large scale becomes more economically feasible when it is part of a biorefinery designed within the circular economy concept. Thus, the aim of this critical review is to highlight and discuss challenges and future trends related to the multi-product microalgae-based biorefineries, including both phototrophic and mixotrophic cultures treating wastewater and the recovery of biomass as a source of valuable macromolecules and high-added and low-value products (biofertilizers and biostimulants). The therapeutic properties of some microalgae-bioactive compounds are also discussed. Novel trends such as the screening of species for antimicrobial compounds, the production of bioplastics using wastewater, the circular economy strategy, and the need for more Life Cycle Assessment studies (LCA) are suggested as some of the future research lines.

Promising Biomolecules with High Antioxidant Capacity Derived from Cryptophyte Algae Grown under Different Light Conditions

The accumulation and production of biochemical compounds in microalgae are influenced by available light quality and algal species-specific features. In this study, four freshwater cryptophyte strains (Cryptomonas ozolinii, C. pyrenoidifera, C. curvata, and C. sp. (CPCC 336)) and one marine strain (Rhodomonas salina) were cultivated under white (control), blue, and green (experimental conditions) lights. Species-specific responses to light quality were detected, i.e., the color of light significantly affected cryptophyte biomass productivity and biochemical compositions, but the optimal light for the highest chemical composition with high antioxidant capacity was different for each algal strain. Overall, the highest phycoerythrin (PE) content (345 mg g−1 dry weight; DW) was reached by C. pyrenoidifera under green light. The highest phenolic (PC) contents (74, 69, and 66 mg g−1 DW) were detected in C. curvata under control conditions, in C. pyrenoidifera under green light, and in C. ozolinii under blue light, respectively. The highest exopolysaccharide (EPS) content (452 mg g−1 DW) was found in C. curvata under the control light. In terms of antioxidant activity, the biochemical compounds from the studied cryptophytes were highly active, with IC50 -values < 50 µg mL−1. Thus, in comparison to well-known commercial microalgal species, cryptophytes could be considered a possible candidate for producing beneficial biochemical compounds.

Bioenergy, Biofuels, Lipids and Pigments—Research Trends in the Use of Microalgae Grown in Photobioreactors

This scientometric review and bibliometric analysis aimed to characterize trends in scientific research related to algae, photobioreactors and astaxanthin. Scientific articles published between 1995 and 2020 in the Web of Science and Scopus bibliographic databases were analyzed. The article presents the number of scientific articles in particular years and according to the publication type (e.g., articles, reviews and books). The most productive authors were selected in terms of the number of publications, the number of citations, the impact factor, affiliated research units and individual countries. Based on the number of keyword occurrences and a content analysis of 367 publications, seven leading areas of scientific interest (clusters) were identified: (1) techno-economic profitability of biofuels, bioenergy and pigment production in microalgae biorefineries, (2) the impact of the construction of photobioreactors and process parameters on the efficiency of microalgae cultivation, (3) strategies for increasing the amount of obtained lipids and obtaining biodiesel in Chlorella microalgae cultivation, (4) the production of astaxanthin on an industrial scale using Haematococcus microalgae, (5) the productivity of biomass and the use of alternative carbon sources in microalgae culture, (6) the effect of light and carbon dioxide conversion on biomass yield and (7) heterotrophy. Analysis revealed that topics closely related to bioenergy production and biofuels played a dominant role in scientific research. This publication indicates the directions and topics for future scientific research that should be carried out to successfully implement economically viable technology based on microalgae on an industrial scale.

Microalgae Strain Porphyridium purpureum for Nutrient Reduction in Dairy Wastewaters

This paper has approached the study of dairy wastewater treatment and the simultaneous biocompound production by Porphyridium purpureum under continuous light and under a day–night cycle. The main goals were to achieve a reduction in the lactose content of the cheese wastewater that was tested and, at the same time, to obtain added value from the produced compounds, so as to increase the economic value of the process. The results show that biomass production increases proportionally with the concentration of lactose for both of the illumination options. The lactose concentration in the waste stream was reduced over 90% in just 7 days. The exopolysaccharide concentration in the growth medium increased with lactose availability. For the samples that were under constant light stress, the concentration of phycobiliproteins was highest when there was small amounts of lactose in the medium. The content of pigments was higher in the case of the day–night cycle of illumination; these being affected by stress factors such as continuous light and high lactose concentration. The results that were obtained prove that dairy wastewaters that are rich in lactose can be used efficiently for the growth of Porphyridium purpureum, achieving an increase in the biomass concentration and a large reduction of the lactose from this waste stream while obtaining a microalgae biomass that is rich in valuable compounds.

The Effect of Colored and White Light on Growth and Phycobiliproteins, Chlorophyll and Carotenoids Content of the Marine Cyanobacteria Phormidium sp. and Cyanothece sp. in Batch Cultures

Two local marine cyanobacteria, Phormidium sp. and Cyanothece sp., were batch-cultured under 18–19.5 °C, at 40 ppt salinity, using white LED light of low (40 μmol photons/m²/s) and high (160 μmol/m²/s) intensity and, additionally, blue, green and red LED light. Yield was highest in high white light in both species (2.15 g dw/L in Phormidium, 1.47 g/L in Cyanothece), followed by green light (1.25 g/L) in Cyanothece and low white and green (1.26–1.33 g/L) in Phormidium. Green light maximized phycocyanin in Phormidium (0.45 mg/mL), while phycoerythrin was enhanced (0.17 mg/mL) by blue light and allophycocyanin by all colors (~0.80 mg/mL). All colors maximized phycocyanin in Cyanothece (~0.32 mg/mL), while phycoerythrin and allophycocyanin peaked under green light (~0.138 and 0.38 mg/mL, respectively). In Phormidium, maximization of chlorophyll-a (9.3 μg/mL) was induced by green light, while total carotenoids and b-carotene (3.05 and 0.89 μg/mL, respectively) by high white light. In Cyanothece, both white light intensities along with green maximized chlorophyll-a (~9 μg/mL) while high white light and green maximized total carotenoids (2.6–3.0 μg/mL). This study strongly indicates that these cyanobacteria can be cultured at the first stage under white light to accumulate sufficient biomass and, subsequently, under colored light for enhancing phycobiliproteins.

Cultivation of Arthrospira platensis in Brewery Wastewater

Cultivation of photosynthetic microorganisms in wastewater is a potential cost-effective method of treating wastewater and simultaneously providing the essential nutrients for high-value biomass production. This study investigates the cultivation of the cyanobacterium Arthrospira platensis in non-diluted and non-pretreated brewery wastewater under non-sterile and alkaline growth conditions. The system’s performance in terms of biomass productivity, pollutant consumption, pigment production and biomass composition was evaluated under different media formulations (i.e., addition of sodium chloride and/or bicarbonate) and different irradiation conditions (i.e., continuous illumination and 16:8 light:dark photoperiod). It was observed that the combination of sodium bicarbonate with sodium chloride resulted in maximum pigment production recorded at the end of the experiments, and the use of the photoperiod led to increased pollutant removal (up to 90% of initial concentrations) and biomass concentration (950 mg/L). The composition of the microbial communities established during the experiments was also determined. It was observed that heterotrophic bacteria dominated by the phyla of Pseudomonadota, Bacillota, and Bacteroidota prevailed, while the cyanobacteria population showcased a dynamic behavior throughout the experiments, as it increased towards the end of cultivation (relative abundance of 10% and 30% under continuous illumination and photoperiod application, respectively). Overall, Arthrospira platensis-based cultivation proved to be an effective method of brewery wastewater treatment, although the large numbers of heterotrophic bacteria limit the usage of the produced biomass to applications such as biofuel and biofertilizer production.

Enhanced carbon capture and utilization (CCU) using heterologous carbonic anhydrase in Chlamydomonas reinhardtii for lutein and lipid production

Chlamydomonas reinhardtii is a model microalga that has a higher growth rate and produces high levels of lutein and lipids, but biomass production is limited. Carbonic anhydrase (CA) converts atmospheric CO₂ to bicarbonate which is crucial for carbon-concentrating mechanism (CCM) in microalgae and boosts cell density. Therefore, C. reinhardtii harboring the heterologous CA from Mesorhizobium loti (MlCA) and Sulfurihydrogenibium yellowstonense (SyCA) were explored to increase CO₂ capture and utilization (CCU) through different culture devices. Genetically modified C. reinhardtii was able to grow from mixotrophic to autotrophic conditions. Subsequently, biomass, lutein, and lipid were maximized to OD₆₈₀ of 4.56, 21.32 mg/L and 672 mg/L using photo-bioreactor (PBR) with 5% CO₂. Moreover, CO₂ assimilation rate was 2.748 g-CO₂/g-DCW and 2.792 g-CO₂/g-DCW under mixotrophic and autotrophic conditions, respectively. The biomass accumulation correlated with CA activity. In addition, the transcript levels of major genes in metabolic pathways of lutein and lipid were dramatically increased.

Innovative and Healthier Dairy Products through the Addition of Microalgae: A Review

In recent years, the development of healthier foods, richer in nutraceutical or functional compounds, has been in great demand. Microalgae are attracting increasing attention, as their incorporation in foods and beverages can be a promising strategy to develop sustainable foods with improved nutritional profiles and a strong positive impacts on health. Despite the increasing market demand in plant-based foods, the popularity of fermented dairy foods has increased in the recent years since they are a source of microorganisms with health-promoting effects. In this context, the incorporation of microalgae in cheeses, fermented milks and other dairy products represents an interesting approach towards the development of innovative and added-value hybrid products based on animal proteins and enriched with vegetable origin ingredients recognized as extremely valuable sources of bioactive compounds. The effect of the addition of microalgal biomass (Chlorella vulgaris, Arthrospira platensis, Pavlova lutheri, and Diacronema vlkianum, among others) and its derivates on the physicochemical composition, colorimetric and antioxidant properties, texture and rheology behavior, sensory profile, and viability of starter cultures and probiotics in yogurt, cheese and ice cream is discussed in the current work. This review of the literature on the incorporation of microalgae in dairy products aims to contribute to a better understanding of the potential use of these unique food ingredients in the development of new sustainable products and of their beneficial effects on health. Considering the importance of commercialization, regulatory issues about the use of microalgae in dairy products are also discussed.

Food waste bioconversion into new food: A mini-review on nutrients circularity in the production of mushrooms, microalgae and insects

The global challenge of feeding an ever-increasing world population is leading scientists' attention towards nutritious and sustainable foods whose production should have low impacts on environment, economy and society. In case the input feedstock can be waste nutrients, the label of such productions becomes even greener. Nutrients circularity is nowadays an important circular economy practice. This mini-review focuses on the valorisation of food waste as precious biomass to grow new food and feed. In particular, three functional edibles are discussed in the present paper: mushrooms, microalgae and insects. These foods are part of people diets since ages in certain areas of the world and the original aspect of their cultivation and breeding found on waste nutrients recovery is here reviewed. Proofs of such food waste biorefinery viability are already given by several researches featuring the main traits of a suitable growing medium: optimal pool of nutrients and optimal pH. However, lot of work still needs to be done in order to assess the optimal growth and cultivation conditions and the health security of the harvested/bred edibles. A SWOT factors analysis was performed.

Current perspective of innovative strategies for bioremediation of organic pollutants from wastewater

Organic contaminants in water are a growing environmental threat to sustainable development, with detrimental effects on the biosphere. In recent years, researchers have increasingly focused their attention on the area of bioremediation as an important tool to eliminate harmful pollutants from the environment. This review examines the application of bioremediation technologies to the removal of organic pollutants, with an emphasis on hydrocarbons and textile dyes. It applies a descriptive bibliometric analysis to study statistical practicality-vs-applicability of bioremediation of emerging organic pollutants. The paper identifies efficient pathways for bioremediation of different types of organic pollutants and outlines the potential for an eco-friendly and economical approach for the biological remediation of micropollutants by microalgae. Facts and figures on various hazardous pollutants, constraints in their current removal from water at an industrial level, and promising future solutions are carefully presented here.

Advances in microalgal research for valorization of industrial wastewater

This review article focuses on recent updates on remediation of industrial wastewater (IWW) through microalgae cultivation. These include how adding additional supplements of nutrient to some specific IWWs lacking adequate nutrients improving the microalgae growth and remediation simultaneously. Various pretreatments strategy recently employed for IWWs treatment other than dealing with microalgae was discussed. Various nutrient-rich IWW could be utilized directly with additional dilution, supplement of nutrients and without any pretreatment. Recent advances in various approaches and new tools used for cultivation of microalgae on IWW such as two-step cultivation, pre-acclimatization, novel microalgal-bioelectrical systems, integrated catalytic intense pulse-light process, sequencing batch reactor, use of old stabilized algal-bacterial consortium, immobilized microalgae cells, microalgal bacterial membrane photobioreactor, low-intensity magnetic field, BIO_ALGAE simulation tool, etc. are discussed. In addition, biorefinery of microalgal biomass grown on IWW and its end-use applications are reviewed.

Towards a general kinetic microalgae model: Extending a semi-deterministic green microalgae model for the cyanobacterium Arthrospira platensis and red alga Porphyridium purpureum

Mathematical models for microalgae and cyanobacteria are seldomly validated for different algal species, as such limiting their applicability. Therefore, in this research, a previously developed kinetic model describing the growth of the green microalgae species Chlorella vulgaris was used to simulate the growth of the cyanobacterium Arthrospira platensis and the red alga Porphyridium purpureum. Based on a global sensitivity analysis, the model parameter µ_max,A was calibrated using respirometric-titrimetric data. Calibration yielded values of 5.76 ± 0.17 d^-1, 2.06 ± 0.16 d^-1 and 1.06 ± 0.09 d^-1 for Chlorella vulgaris, Arthrospira platensis and Porphyridium purpureum, respectively. Model simulations revealed that the biological growth equations in this model are adequate. However, increased light intensities triggered a survival mechanism for Arthrospira platensis, which is currently not taken into account by the model, leading to bad model accuracy under these circumstances. Future work should address the most important survival mechanisms and include those in the model to widen its applicability.

A review on cyanobacteria cultivation for carbohydrate-based biofuels: Cultivation aspects, polysaccharides accumulation strategies, and biofuels production scenarios

Cyanobacterial biomass has constituted a crucial third and fourth-generation biofuel material, with great potential to synthesize a wide range of metabolites, mainly carbohydrates. Lately, carbohydrate-based biofuels from cyanobacteria, such as bioethanol, biohydrogen, and biobutanol, have attracted attention as a sustainable alternative to petroleum-based products. Cyanobacteria can perform a simple process of saccharification, and extracted carbohydrates can be converted into biofuels with two alternatives; the first one consists of a fermentative process based on bacteria or yeasts, while the second alternative consists of an internal metabolic process of their own in intracellular carbohydrate content, either by the natural or genetic engineered process. This study reviewed carbohydrate-enriched cyanobacterial biomass as feedstock for biofuels. Detailed insights on technical strategies and limitations of cultivation, polysaccharide accumulation strategies for further fermentation process were provided. Advances and challenges in bioethanol, biohydrogen, and biobutanol production by cyanobacteria synthesis and an independent fermentative process are presented. Critical outlook on life-cycle assessment and techno-economical aspects for large-scale application of these technologies were discussed.

Challenges and opportunities for more efficient water use and circular wastewater management. The case of Campania Region, Italy

By 2050, global demand for water is expected to increase by some 55% due to population growth and urbanization. The utilization of large amounts of freshwater in the world, generate huge volumes of wastewater of which, globally, more than 80% is discharged without treatment, thus causing impacts on aquatic ecosystems, human health and economic productivity. More sustainable practices of wastewater management are expected as a way towards circular bioeconomy (CBE) processes, whose goal is to implement closed systems promoting the systematic use of recycling, reuse and recovery of bioproducts and by-products and the reduction of waste generation. This approach, if adopted in the water and wastewater sector, can ensure environmental, economic and social benefits. The reuse of wastewater, on the one hand, reduces the volume of wastewater and the pressure on water bodies; on the other hand, the recovery of nutrients (P or N) and/or other high value bioproducts (biogas, cellulose, biopolymers) from wastewater offers numerous advantages in terms of supplying new raw bio-based materials that can be refed back to supply chains (thus substituting fossil resources) and, at the same time, producing cleaner water to be reused. Nevertheless, while in Europe many industries have demonstrated the ability to recycle and reuse water, in many regions of Italy the sustainable management of water and wastewater is not yet consolidated. In this study we explore the available technological, economic and environmental options concerning water use and wastewater treatment and we apply them to design appropriate scenarios for improved use efficiency and circular management. A comprehensive literature review of the most promising wastewater treatment processes for resources and energy valorization was conducted. The recovery of PHAs, struvite, nitrogen and algal biomass, as potential substitutes for conventional PET, phosphate and nitrogen chemical fertilizers and electricity, respectively, in addition to reusable treated water, were hypothesized and carefully discussed. Resulting scenarios are tested against the present situation of Campania Region (situated in Southern Italy) based on population and demand statistics, in order to develop strategies and policies potentially applicable locally and elsewhere.

Sustainable valorization of meat processing wastewater with synergetic eutectic mixture based purification of R-Phycoerythrin from porphyrium cruentium

Wastewater effluent from meat processing industries are enriched with nutrients but remain underutilized. Therefore, an efficient method was administered by employing this resource for the cultivation of Porphyreum cruentium. The cultured biomass was exposed to a one-step disruption and selective purification method using a protic deep eutectic solvent to obtain a commercially significant pigment, R-Phycoerythrin (R-PE). Six protic deep eutectic solvents (pDES) were synthesized and their thermophysical activity determined. A synergy between microwave and cavitation (MACE-DLPME) has been achieved for the effective recovery of these membrane proteins. The addition of pDES provides the selective medium for the concentration of R-PE. Optimization of the MACE-DLPME method yields 95.9% (w/w) of R-PE. Preparative size exclusion chromatography resulted in (28 µg/g) of R-PE. Further ultra-purification by anion exchange chromatography enhances the purity fold of R-PE to 125. The resulting ultrapure fraction exhibits enhanced anti-platelet activity (1.56 mg/g ascorbic acid equivalent).

Model based analysis of carbon fluxes within microalgae-bacteria flocs using respirometric-titrimetric data

With the emerging need of nutrient recycling in resource recovery facilities, the use of microalgae-bacteria flocs has received considerable attention in the past few years. However, although the main biological processes are already known, the complex interactions occurring between algae and bacteria are not fully understood. In this work, a combined respirometric-titrimetric unit was used to assess the microorganisms' kinetics within microalgae-bacteria flocs under different growth regimes (i.e. photoautotrophic, heterotrophic and mixotrophic) and different ratios of inorganic (IC) to organic carbon (OC) (IC:OC-ratios). Using this respirometric-titrimetric data, a new model was developed, calibrated and successfully validated. The model takes into account the heterotrophic growth of bacteria, the photoautotrophic, heterotrophic and mixotrophic growth of algae and the production and consumption of extracellular polymeric substances (EPS) by both bacteria and algae. As such, the model can be used for detailed analysis of the carbon fluxes within microalgae-bacteria flocs in an efficient way. Model analysis revealed the high importance of the EPS regulatory mechanism. Firstly, under heterotrophic growth conditions, OC-uptake occurred during the first 10-15 min. This was linked with internal OC storage (49% of added OC) and EPS production (40%), as such providing carbon reserves which can be consumed during famine conditions. Moreover, the algae were able to compete with bacteria for OC. Secondly, under photoautotrophic conditions, algae used the added IC to grow (57% of added IC) and to produce EPS (29%), which consecutively stimulated heterotrophic bacteria growth (20%). Finally, under mixotrophic conditions, low IC:OC-ratios resulted in an extensive OC-storage and EPS production (50% of added C) and an enhanced microalgal CO₂ reuse, resulting in an increased algal growth of up to 29%.

Production of selenium-enriched microalgae as potential feed supplement in high-rate algae ponds treating domestic wastewater

This study assessed the selenium (Se) removal efficiency of two pilot-scale high-rate algae ponds (HRAPs) treating domestic wastewater and investigated the production of Se-enriched microalgae as potential feed supplement. The HRAP-Se had an average Se, NH₄⁺-N, total phosphorus and COD removal efficiency of, respectively, 43%, 93%, 77%, and 70%. Inorganic Se taken up by the microalgae was mainly (91%) transformed to selenoamino acids, and 49-63% of Se in the Se-enriched microalgae was bioaccessible for animals. The crude protein content (48%) of the microalgae was higher than that of soybeans, whereas the essential amino acid content was comparable. Selenium may induce the production of the polyunsaturated fatty acids omega-3 and omega-6 in microalgae. Overall, the production of Se-enriched microalgae in HRAPs may offer a promising alternative for upgrading low-value resources into high-value feed supplements, supporting the drive to a circular economy.

Enhancing growth, phycoerythrin production, and pigment composition in the red alga Colaconema sp. Through optimal environmental conditions in an indoor system

Phycoerythrin (PE) is a compound with strong potential for both basic research and industrial applications, but short supply and high prices have so far hindered its development. One common problem is a shortage of biomass for extraction. The aim of the present study was to determine a cultivation strategy (optimizing temperature, irradiance, photoperiod, and light quality) to produce greater biomass and higher PE concentrations in the alga Colaconema sp. We found that an optimized culture process could increase algae growth 7-9 fold while allowing extraction of 9-10 mg g^-1 total phycobiliproteins, containing 60%-65% PE. Low energy costs make this approach economically feasible and competitive when compared with existing methods. Our results suggest an improved strategy for the large-scale production of PE and offer valuable applications in the algae industry.

Culture Growth of the Cyanobacterium Phormidium sp. in Various Salinity and Light Regimes and Their Influence on Its Phycocyanin and Other Pigments Content

A strain of the filamentous non N-fixing cyanobacterium Phormidium sp. isolated from the Messolonghi (W. Greece) saltworks, was cultured in the laboratory at six different combinations of salinity (20-40-60 ppt) and illumination (low-2000 lux and high-8000 lux). At salinities of 60 and 40 ppt and in high illumination (XL-8000 lux), the growth rate (μmax) presented the highest values (0.491 and 0.401, respectively) compared to the corresponding at 20 ppt (0.203). In general and at all salinities, the higher illumination (XL) gave the highest growth rates and shorter duplication time (tg) in comparison to the lower illumination (L). On the contrary, phycocyanin, phycoerythrin and allophycocyanin production was extremely increased in the lower illumination (L) in all salinities, from ~14 fold at 40 and 60 ppt to 269 fold at 20 ppt of those corresponding to higher illumination (XL). Similar analogies were also recorded for the other two billiproteins. Chlorophyll-a content was also higher in lower illumination at all salinities in contrast to total carotenoids that did not exhibit such a pattern. The high growth rate and high phycocyanin content along with the rapid sedimentation of its cultured biomass can set this marine Phormidium species as a promising candidate for mass culture.

Reuniting the Biogeochemistry of Algae for a Low-Carbon Circular Bioeconomy

Given their advantages of high photosynthetic efficiency and non-competition with land-based crops, algae, that are carbon-hungry and sunlight-driven microbial factories, are a promising solution to resolve energy crisis, food security, and pollution problems. The ability to recycle nutrient and CO₂ fixation from waste sources makes algae a valuable feedstock for biofuels, food and feeds, biochemicals, and biomaterials. Innovative technologies such as the bicarbonate-based integrated carbon capture and algae production system (BICCAPS), integrated algal bioenergy carbon capture and storage (BECCS), as well as ocean macroalgal afforestation (OMA), can be used to realize a low-carbon algal bioeconomy. We review how algae can be applied in the framework of integrated low-carbon circular bioeconomy models, focusing on sustainable biofuels, low-carbon feedstocks, carbon capture, and advances in algal biotechnology.

Recycling industrial wastewater for improved carbohydrate-rich biomass production in a semi-continuous photobioreactor: Effect of hydraulic retention time

This study aimed to investigate a mixed microalgae culture's capacity to simultaneously remove nutrients and organic matter from industrial effluents while producing carbohydrate-rich biomass. A culture initially dominated by filamentous cyanobacteria Geitlerinema sp. was inoculated in a lab-scale stirred tank photobioreactor, operating at 10, 8, and 6 days hydraulic retention time (HRT). The results show that different HRT led to different inorganic carbon profiles and N:P ratios in the culture, influencing microbial changes, and carbohydrate content. Hence, higher N-NH₄⁺ removal efficiencies were obtained at HRT of 10 d and decreased with decreasing HRT. Whereas, complete depletion of P-PO₄^3- was achieved only at HRT of 8 d and 6 d. Also, the highest COD removal efficiency (60%) was achieved at 6 d of HRT. The maximum accumulation of carbohydrates was achieved at HRT of 8 d, which presented an N:P ratio of 22:1 and carbon availability, recording a constant carbohydrate content of 57% without any additional carbon source. Furthermore, this operational condition reached the best biomass production of 0.033 g L^-1d^-1 of easy-settling cyanobacteria dominated culture. According to the results, this process presents an alternative to recycling industrial effluents and, at the same time, grow valuable biomass, closing a loop for sustainable economy.

Removal and environmental risk assessment of contaminants of emerging concern from irrigation waters in a semi-closed microalgae photobioreactor

The present study evaluated the efficiency of a semi-closed, tubular, horizontal photobioreactor (PBR) to treat a mixture of irrigation and rural drainage water, focusing in the removal of different contaminants of emerging concern (CECs), and evaluating the environmental impact of the resulting effluent. Target CECs included pharmaceuticals, personal care products and flame retardants. Of the 13 compounds evaluated, 11 were detected in the feed water entering the PBR, and diclofenac (DCF) (1107 ng L^-1) and N,N-diethyl-toluamide (DEET) (699 ng L^-1) were those present at the greatest concentrations. The best removal efficiencies were achieved for the pharmaceuticals diazepam (94%), lorazepam (LZP) (83%) and oxazepam (OXA) (71%), and also for ibuprofen (IBU) (70%). For the rest of the CECs evaluated, attenuation was similar to that obtained after conventional wastewater treatment, ranging from basically no elimination (carbamazepine (CBZ) and tris-(2-chloroethyl) phosphate (TCEP)) to medium efficiencies (DCF and tributyl phosphate (TBP) (50%)). Environmental risk assessment based on hazard quotients (HQs) resulted in HQ values < 0.1 (no risk associated) for most of the compounds and most of the trophic levels considered. Values between 1 and 10 (moderate risk) were obtained for tonalide (AHTN) (fish) and CBZ (invertebrates). The most sensitive trophic level was green algae, whereas fish and aquatic plants were the most resilient. Our results suggest that microalgae-based treatments could become a green, cost-effective alternative to conventional wastewater treatment regarding the efficient elimination of these contaminants.

Bioremediation of Pyropia-processing wastewater coupled with lipid production using Chlorella sp

Pyropia-processing wastewater (PPW) contains diverse organic nutrients and causes environmental pollution. To explore the nutrient removal efficiency and growth performance of Chlorella sp. on PPW, the cultures were conducted in different culture substrates. Results showed that, after 7 days of incubation, the removal rates of total nitrogen (TN), total phosphorus (TP) and phycobiliprotein (PP) all reached more than 90% by cultivating Chlorella sp. C2 and C. sorokiniana F-275 in PPW. The chemical oxygen demand (COD) removal efficiencies could be over 50%. Meanwhile, the increments of biomass in two tested Chlorella strains were 1.39 and 4.89 times higher than those of BG11 and BBM substrates and the increases in lipid productivity were 1.34 and 10.18- fold, respectively. The C18:3 fatty acid proportions were markedly reduced by 27.89% and 29.10%. These results suggest that Chlorella sp. could efficiently reduce various nutrients in PPW and simultaneously accumulate higher biomass with higher biodiesel characteristics.

Ammonium Utilization in Microalgae: A Sustainable Method for Wastewater Treatment

In plant cells, ammonium is considered the most convenient nitrogen source for cell metabolism. However, despite ammonium being the preferred N form for microalgae, at higher concentrations, it can be toxic, and can cause growth inhibition. Microalgae’s tolerance to ammonium depends on the species, with various taxa showing different thresholds of tolerability and symptoms of toxicity. In the environment, ammonium at high concentrations represents a dangerous pollutant. It can affect water quality, causing numerous environmental problems, including eutrophication of downstream waters. For this reason, it is important to treat wastewater and remove nutrients before discharging it into rivers, lakes, or seas. A valid and sustainable alternative to conventional treatments could be provided by microalgae, coupling the nutrient removal from wastewater with the production of valuable biomass. This review is focused on ammonium and its importance in algal nutrition, but also on its problematic presence in aquatic systems such as wastewaters. The aim of this work is to provide recent information on the exploitation of microalgae in ammonium removal and the role of ammonium in microalgae metabolism.

Microalgae-based bioremediation of water contaminated by pesticides in peri-urban agricultural areas

The present study evaluated the capacity of a semi-closed, tubular horizontal photobioreactor (PBR) to remove pesticides from agricultural run-off. The study was carried out in summer (July) to study its efficiency under the best conditions (highest solar irradiation). A total of 51 pesticides, including 10 transformation products, were selected and investigated based on their consumption rate and environmental relevance. Sixteen of them were detected in the agricultural run-off, and the estimated removal efficiencies ranged from negative values, obtained for 3 compounds, namely terbutryn, diuron and imidacloprid, to 100%, achieved for 10 compounds. The acidic herbicide MCPA was removed by 88% in average, and the insecticides 2,4-D and diazinon showed variable removals, between 100% and negative values. The environmental risk associated to the compounds still present in the effluent of the PBR was evaluated using hazard quotients (HQs), calculated using the average and highest measured concentrations of the compounds. HQ values > 10 (meaning high risk) were obtained for imidacloprid (21), between 1 and 10 (meaning moderate risk) for 2,4-D (2.8), diazinon (4.6) and terbutryn (1.5), and <1 (meaning low risk) for the remaining compounds diuron, linuron and MCPA. The PBR treatment yielded variable removals depending on the compound, similarly to conventional wastewater treatment plants. This study provides new data on the capacity of microalgae-based treatment systems to eliminate a wide range of priority pesticides under real/environmental conditions.

Experimental assessment and mathematical modelling of the growth of Chlorella vulgaris under photoautotrophic, heterotrophic and mixotrophic conditions

Microalgae show great potential for wastewater treatment and nutrient recovery. However, microalgae cultivation and harvesting are affected by the low biomass concentrations which are inherent to the photoautotrophic growth process. Mixotrophic growth can be a solution as it increases microalgae biomass concentration independently from the incident light intensity. In this work, a combined respirometric-titrimetric unit was used to assess the microalgae kinetics during such mixotrophic growth conditions for Chlorella vulgaris. Based on the experimental results, a microalgae model was extended in order to gain more insight in the delicate balance between photoautotrophic and heterotrophic growth. The results suggest that during heterotrophic growth with light in absence of external inorganic carbon sources (i.e. photoheterotrophic growth), all CO₂ produced by the heterotrophic pathway is internally recycled for photoautotrophic growth. Moreover, it was shown that photoautotrophic growth is the preferential growth mechanism under mixotrophic cultivation conditions (i.e. light + inorganic carbon + organic carbon), but that high oxygen concentrations activate the heterotrophic growth pathway to avoid photorespiration. The extended microalgae model supports these findings, with good model performance for all conducted experiments.