Simultaneous removal and high tolerance of norfloxacin with electricity generation in microbial fuel cell and its antibiotic resistance genes quantification

Rational Design and Synthesis of Fe-Doped Co-Based Coordination Polymer Composite Photocatalysts for the Degradation of Norfloxacin and Ciprofloxacin

The solar light-responsive Fe-doped Co-based coordination polymer (Fe@Co-CP) photocatalyst was synthesized under mild conditions. [Co(4-padpe)(1,3-BDC)]n (Co-CP) was first constructed using mixed ligands through the hydrothermal method. Then, Fe was introduced into the Co-CP framework to achieve the enhanced photocatalytic activity. The optimal Fe@Co-CP-2 exhibited excellent catalytic degradation performance for norfloxacin and ciprofloxacin under sunlight irradiation without auxiliary oxidants, and the degradation rates were 91.25 and 92.66% in 120 min. These excellent photocatalytic properties were ascribed to the generation of the Fe-O bond, which not only enhanced the light absorption intensity but also accelerated the separation efficiency of electrons and holes, and hence significantly improved the photocatalytic property of the composites. Meanwhile, Fe@Co-CP-2 displayed excellent stability and reusability. In addition, the degradation pathways and intermediates of antibiotic molecules were effectively analyzed. The free radical scavenging experiment and ESR results confirmed that •OH, •O2-, and h+ active species were involved in the catalytic degradation reaction; the corresponding mechanisms were deeply investigated. This study provides a fresh approach for constructing Fe-doped Co-CP-based composite materials as photocatalysts for degradation of antibiotic contaminants.

Mechanisms Underlying the Overlooked Chiral Fungicide-Driven Enantioselective Proliferation of Antibiotic Resistance in Earthworm Intestinal Microbiome

From a "One Health" perspective, the global threat of antibiotic resistance genes (ARGs) is associated with modern agriculture practices including agrochemicals application. Chiral fungicides account for a considerable proportion of wildly used agrochemicals; however, whether and how their enantiomers lead to differential proliferation of antibiotic resistance in agricultural environments remain overlooked. Focused on the soil-earthworm ecosystem, we for the first time deciphered the mechanisms underlying the enantioselective proliferation of antibiotic resistance driven by the enantiomers of a typical chiral fungicide mandipropamid (i.e., R-MDP and S-MDP) utilizing a multiomic approach. Time-series metagenomic analysis revealed that R-MDP led to a significant enhancement of ARGs with potential mobility (particularly the plasmid-borne ARGs) in the earthworm intestinal microbiome. We further demonstrated that R-MDP induced a concentration-dependent facilitation of plasmid-mediated ARG transfer among microbes. In addition, transcriptomic analysis with verification identified the key aspects involved, where R-MDP enhanced cell membrane permeability, transfer ability, biofilm formation and quorum sensing, rebalanced energy production, and decreased cell mobility versus S-MDP. Overall, the findings provide novel insights into the enantioselective disruption of microbiome and resistome in earthworm gut by chiral fungicides and offer significant contributions to the comprehensive risk assessment of chiral agrochemicals in agroecosystems.

Environmental remediation of the norfloxacin in water by adsorption: Advances, current status and prospects

Antibiotics are considered as the new generation water pollutants as these disturb endocrine systems if water contaminated with antibiotics is consumed. Among many antibiotics norfloxacin is present in various natural water bodies globally. This antibiotic is considered an emerging pollutant due to its low degradation in aquatic animals. Besides, it has many side effects on human vital organs. Therefore, the present article discusses the recent advances in the removal of norfloxacin by adsorption. This article describes the presence of norfloxacin in natural water, consumption, toxicity, various adsorbents for norfloxacin removal, optimization factors for norfloxacin removal, kinetics, thermodynamics, modeling, adsorption mechanism and regeneration of the adsorbents. Adsorption takes place in a monolayer following the Langmuir model. The Pseudo-second order model represents the kinetic data. The adsorption capacity ranged from 0.924 to 1282 mg g-1. In this sense, the parameters such as the NFX concentration added to the adsorbent textural properties exerted a great influence. Besides, the fixed bed-based removal at a large scale is also included. In addition to this, the simulation studies were also discussed to describe the adsorption mechanism. Finally, the research challenges and future perspectives have also been highlighted. This article will be highly useful for academicians, researchers, industry persons, and government authorities for designing future advanced experiments.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Emerging soil contamination of antibiotics resistance bacteria (ARB) carrying genes (ARGs): New challenges for soil remediation and conservation

Soil plays a vital role as a nutrient source for microflora and plants in ecosystems. The accumulation and proliferation of antibiotics resistance bacteria (ARB) and antibiotics resistance genes (ARGs) causes emerging soil contamination and pollution, posing new challenges for soil remediation, recovery, and conservation. Fertilizer application in agriculture is one of the most important sources of ARB and ARGs contamination in soils. The recent existing techniques for the remediation of soil polluted with ARB and ARGs are very limited in terms of ARB and ARGs removal in soil. Bioelectrochemical remediation using bioelectrochemical systems such as microbial fuel cells and microbial electrolysis cells are promising technologies for the removal of ARB and ARGs in soil. Herein, diverse sources of ARB and ARGs in soil have been reviewed, their effects on soil microbial diversity have been analyzed, and the causes of ARB and ARGs rapid proliferation in soil are explained. Bioelectrochemical systems used for the remediation of soil contaminated with ARB and ARGs is still in its infancy stage and presents serious disadvantage and limits, therefore it needs to be well understood and implemented. In general, merging soil contamination of ARB and ARGs is an increasing concern threatening the soil ecosystem while the remediation technologies are still challenging. Efforts need to be made to develop new, effective, and efficient technologies for soil remediation and conservation to tackle the spread of ARB and ARGs and overcome the new challenges posed by ARB and ARGs contamination in soil.

Quorum-quenching potential of recombinant PvdQ-engineered bacteria for biofilm formation

Quorum sensing (QS) is a core mechanism for bacteria to regulate biofilm formation, and therefore, QS inhibition or quorum quenching (QQ) is used as an effective and economically feasible strategy against biofilms. In this study, the PvdQ gene encoding AHL acylase was introduced into Escherichia coli (DE3), and a PvdQ-engineered bacterium with highly efficient QQ activity was obtained and used to inhibit biofilm formation. Gene sequencing and western blot analysis showed that the recombinant pET-PvdQ strain was successfully constructed. The color reaction of Agrobacterium tumefaciens A136 indicated that PvdQ engineering bacteria had shown strong AHL signal molecule quenching activity and significantly inhibited the adhesion (motility) of Pseudomonas aeruginosa and biofilm formation of activated sludge bacteria in Membrane Bio-Reactor (MBR; inhibition rate 51-85%, p < 0.05). In addition, qRT-PCR testing revealed that recombinant PvdQ acylase significantly reduced the transcription level of QS biofilm formation-related genes (cdrA, pqsA, and lasR; p < 0.05). In this study, QQ genetically engineered bacteria enhanced by genetic engineering could effectively inhibit the QS signal transduction mechanism and have the potential to control biofilm formation of pathogenic bacteria in the aquaculture environment, providing an environmentally friendly and alternative antibiotic strategy to suppress biofilm contamination.

Simultaneous removal of sediment and water contaminants in a microbial electrochemical system with embedded active electrode by in-situ utilization of electrons

In the water environment such as lakes, there is a phenomenon that the sediment and overlying water are polluted at the same time. In this study, A microbial electrochemical system with an embedded active electrode was developed for simultaneous removal of polycyclic aromatic hydrocarbons in sediment and antibiotics in overlying water by in-situ utilization of electrons. In the closed-circuit group, the pyrene concentration in sediment decreased from 9.94 to 2.08 mg/L in 96 d, and the sulfamethoxazole concentration in water decreased from 5.12 to 1.12 mg/L in 168 h. These values were 18.71 % and 31.21 % higher, respectively, than those of the open-circuit group. The pyrene degradation pathway may be from polycyclic aromatic substances to low-cyclic aromatic hydrocarbons via successive breakdown of benzene rings. Multiple metabolites produced by reduction verified that SMX or its intermediates were reductively degraded in water. On the active electrode, the relative abundances of Acetobacterium and Piscinibacter, which were genera related to SMX degradation, was promoted, while the electricity-producing genus Pseudomonas was inhibited. ccdA, pksS, torC, and acsE genes related to extracellular electron transport may accelerate electron transport. Electrons could be transferred to SMX under the influence of proteins involved in extracellular electron transport, and SMX could be degraded reductively as an electron acceptor by microbes. Generation of electrons and in-situ utilization for simultaneous removal of solid-liquid two-phase pollutants will provide mechanistic insight into pollutant biodegradation by microbial electrochemistry and promote the development of sustainable bioremediation strategies for surface water.

A review of the adsorption method for norfloxacin reduction from aqueous media

Norfloxacin (NRFX) is one of a class of antibiotics known as broad-spectrum fluoroquinolone antibiotic that is frequently used to treat infectious disorders in both animals and humans. NRFX is considered an emergent pharmaceutical contaminate. This review's objective is to evaluate empirical data on NRFX's removal from aqueous medium. The environmental danger of NRFX in the aquatic environment was validated by an initial ecotoxicological study. Graphene oxide/Metal Organic Framework (MOF) based composite, followed by Magnesium oxide/Chitosan/Graphene oxide composite gave the highest NRFX adsorption capacities (Qmax) of 1114.8 and 1000 mg/g, respectively. The main adsorption mechanisms for NRFX uptake include electrostatic interactions, H-bonds, π-π interactions, electron donor-acceptor interactions, hydrophobic interactions, and pore diffusion. The adsorptive uptake of NRFX were most suitably described by Langmuir isotherm and pseudo-second order implying adsorbate-to-adsorbent electron transfer on a monolayer surface. The thermodynamics of NRFX uptake is heavily dependent on the makeup of the adsorbent, and the selection of the eluent for desorption from the solid phase is equally important. There were detected knowledge gaps in column studies and adsorbent disposal method. There's great interest in scale-up and industrial applications of research results that will aid in management of water resources for sustainability.

A critical review on retaining antibiotics in liquid digestate: Potential risk and removal technologies

Substantial levels of antibiotics remain in liquid digestate, posing a significant threat to human safety and the environment. A comprehensive assessment of residual antibiotics in liquid digestate and related removal technologies is required. To this end, this review first evaluates the potential risks of the residual antibiotics in liquid digestate by describing various anaerobic digestion processes and their half-lives in the environment. Next, emerging technologies for removing antibiotics in liquid digestate are summarized and discussed, including membrane separation, adsorption, and advanced oxidation processes. Finally, this study comprehensively and critically discusses these emerging technologies' prospects and challenges, including techno-economic feasibility and environmental impacts.

In-situ degradation of Amphotericin B in a microbial electrochemical cell containing wastewater

Antimicrobial resistance raises serious medical implications and is primarily caused by indiscriminate usage and environmental contamination with antimicrobial agents. To prevent microbes from developing resistance against antimicrobial agents, they must be effectively degraded. This is the first study that investigates the degradation of Amphotericin B(AmB) with simultaneous wastewater treatment in a Microbial Peroxide producing cell (MPPC). Two sets of MPPCs (A and B) were used to degrade AmB oxidatively, one with H₂O₂ and the other with the microbial electro Fenton process in a catholyte containing 0.1% AmB. MPPC A and B had voltage outputs of 0.356 ± 3 V and 0.411 ± 2 V, producing 26 ± 0.04 mM and 44 ± 0.8 mM of H₂O₂ respectively. The structural changes of treated samples were analyzed using Fourier Transformed Infrared Spectroscopy, which revealed the disappearance of major characteristic bands such as the NH band (1556 cm^-1), the CH band Polyene ring (3358 cm^-1), and others, implying the disruption of multiple double bonds in polyene, resulting in the structure's lactone ring breakdown. Liquid chromatography quadrupole time-of-flight revealed the changes in retention time and peak area of treated samples in comparison to native AmB which also confirmed its structural changes. Such structural disruption induced the drug to lose its antifungal action since no zones of inhibition were detected in an antimicrobial susceptibility test against Candida albicans. The degradation of 57.05% and 69.83% of AmB by H₂O₂ and the Fenton process was also correlated with a reduction in COD. Simultaneously the anodic wastewater treatment in both the MPPCs had COD removal efficiency of 78% and 82% and the BOD removal efficiency was 75.38% and 90% respectively. The MPPC system's process conditions and reactor design could be optimized further to enhance antimicrobial degradation and wastewater treatment. This research offers a sustainable and efficient method for expediting antimicrobial degradation while simultaneously treating wastewater.

Maximizing electron flux, microbial diversity and gene abundance in MFC powered electro-Fenton system by optimizing co-addition of lysozyme and 2-bromoethanesulfonate

In this study, a microbial fuel cell powered electro-Fenton system (MFCⓅEFs) was established in order to overcome the shortcomings of low electron flux and unexpected methane production, while simultaneously treating excess sludge (ES, substrate) and refractory syringic acid (SA). A strategy of co-adding lysozyme (LZ, as ES degradation catalyst) and 2-bromoethanesulfonate (BES, as methane inhibitor) into ES was optimized in MFCⓅEFs to maximize electron flux, microbial community diversity and functional gene abundance. The removal of sludge total chemical oxygen demand (TCOD) achieved 81.69% in 25 d under an optimal co-addition strategy (40.41 mg/gSS of LZ, 27.03 mmol/L of BES, adding on 22.8 h of the7th day), with a simultaneous high degradation of SA (99.30% in 25 h). Correspondingly, a maximum power density of 3.35 W/m³ was achieved (only 0.62 W/m³ from the control), which effectively realizes in-situ micro-electricity generation and utilization for bioelectric Fenton processes. Moreover, 42.25% of the total charges were employed for bio-electricity generation. The electricigens of Pseudomonas, Acinetobacter and Chlorobium showed effective enrichment, while the abundance of methanogenesis archaea was extremely decreased. Functional genes associated with methanogenesis including mtaA, hdra, and mcrA were effectively inhibited. The life cycle assessment along with an optimized co-addition strategy illustrated a beneficial environmental effect, particularly in terms of ecosystem quality and climate change. Above all, an enhanced synchronous degradation of excess sludge and refractory pollutants had been realized in a green and environmentally friendly way.

Deciphering the fate of antibiotic resistance genes in norfloxacin wastewater treated by a bio-electro-Fenton system

The misuse of antibiotics has increased the prevalence of antibiotic resistance genes (ARGs), considered a class of critical environmental contaminants due to their ubiquitous and persistent nature. Previous studies reported the potentiality of bio-electro-Fenton processes for antibiotic removal and ARGs control. However, the production and fate of ARGs in bio-electro-Fenton processes triggered by microbial fuel cells are rare. In this study, the norfloxacin (NFLX) average residual concentrations within two days were 2.02, 6.07 and 14.84 mg/L, and the average removal efficiency of NFLX was 79.8 %, 69.6 % and 62.9 % at the initial antibiotic concentrations of 10, 20 and 40 mg/L, respectively. The most prevalent resistance gene type in all processes was the fluoroquinolone antibiotic gene. Furthermore, Proteobacteria was the dominant ARG-carrying bacteria. Overall, this study can provide theoretical support for the efficient treatment of high antibiotics-contained wastewater by bio-electro-Fenton systems to better control ARGs from the perspective of ecological security.

High concentration of ammonia sensitizes the response of microbial electrolysis cells to tetracycline

Microbial electrolysis cell (MEC) is a promising technology for effective energy conversion of wastewater organics to biogas. Yet, in swine wastewater treatment, the complex contaminants including antibiotics may affect MEC performance, while the high ammonia concentration might increase this risk by increasing cell membrane permeability. In this work, the responses of MECs on tetracycline (TC) with low and high ammonia loadings (80 and 1000 mg L^-1) were fully investigated. The TC of 0 to 1 mg L^-1 slightly improved MEC performance in current production and electrochemical characteristics with low ammonia loading, while TC ≥ 4 mg L^-1 started to show negative effects. Generally, the high ammonia loading sensitized MECs to TC concentration, inducing the current and COD removal of MECs to sharply decline with TC ≥ 0.5 mg L^-1. The positive effect of high ammonia loading on MEC due to conductivity increase was counteracted with TC ≥ 1 mg L^-1. The co-contamination of TC and ammonia significantly decreased the bioactivity and biomass of anode biofilm. Although the high concentration of co-existing TC and ammonia inhibited MEC performance, the reactors still obtained positive energy feedback. The network analyses indicated that the effluent suspension contributed much to antibiotic resistance gene (ARG) transmission, while the microplastics (MPs) in wastewater greatly raised the risks of ARGs spreading. This work systematically examined the synergetic effects of TC and ammonia and the transmission of ARGs in MEC operation, which is conducive to expediting the application of MECs in swine wastewater treatment.

Application of Microbial Fuel Cell (MFC) for Pharmaceutical Wastewater Treatment: An Overview and Future Perspectives

Pharmaceutical wastewater (PWW) is rapidly growing into one of the world’s most serious environmental and public health issues. Existing wastewater treatment systems carry numerous loopholes in supplying the ever-increasing need for potable water resulting from rises in population, urbanization, and industrial growth, and the volume of wastewater produced is growing each day. At present, conventional treatment methods, such as coagulation, sedimentation, oxidation, membrane filtration, flocculation, etc., are used to treat PWW. In contrast to these, the application of microbial fuel cells (MFCs) for decontaminating PWW can be a promising technology to replace these methods. MFC technologies have become a trending research topic in recent times. MFCs have also garnered the interest of researchers worldwide as a promising environmental remediation technique. This review extensively discusses the flaws in standalone conventional processes and the integration of MFCs to enhance electricity production and contaminant removal rates, especially with respect to PWW. This article also summarizes the studies reported on various antibiotics and wastes from pharmaceutical industries treated by MFCs, and their efficiencies. Furthermore, the review explains why further research is needed to establish the actual efficiency of MFCs to achieve sustainable, environmentally friendly, and cost-effective wastewater treatment. A brief on technoeconomic impacts has also been made to provide a glimpse of the way these technologies might replace present-day conventional methods.

N-acyl-homoserine lactones in extracellular polymeric substances from sludge for enhanced chloramphenicol-degrading anode biofilm formation in microbial fuel cells

Exploring an efficient acclimation strategy to obtain robust bioanodes is of practical significance for antibiotic wastewater treatment by bioelectrochemical systems (BESs). This study investigated the effects of two acclimation conditions on chloramphenicol (CAP)-degrading anode biofilm formation in microbial fuel cells (MFCs). The one was continuously added the extracellular polymeric substances (EPS) extracted from anaerobic sludge and increasing concentrations of CAP after the first start-up phase, while the other was added the EPS-1 (N-acyl-homoserine lactones, namely AHLs were extracted from the EPS) at the same conditions. The results demonstrated that AHLs in the sludge EPS played a crucial role for enhanced CAP-degrading anode biofilm formation in MFCs. The AHL-regulation could not only maintain stable voltage outputs but also significantly accelerate CAP removal in the EPS MFC. The maximum voltage of 653.83 mV and CAP removal rate of 1.21 ± 0.05 mg/L·h were attained from the EPS MFC at 30 mg/L of CAP, which were 0.84 and 1.57 times higher than those from the EPS-1 MFC, respectively. These improvements were largely caused by the thick and 3D structured biofilm, strong and homogeneous cell viability throughout the biofilm, and high protein/polysaccharide ratio along with more conductive contents in the biofilm EPS. Additionally, AHLs facilitated the formation of a biofilm with rich biodiversity and balanced bacterial proportions, leading to more beneficial mutualism among different functional bacteria. More bi-functional bacteria (for electricity generation and antibiotic resistance/degradation) were specifically enriched by AHLs as well. These findings provide quorum sensing theoretical knowledge and practical instruction for rapid antibiotic-degrading electrode biofilm acclimation in BESs.

A Review of Stand-Alone and Hybrid Microbial Electrochemical Systems for Antibiotics Removal from Wastewater

The growing concern about residual antibiotics in the water environment pushes for innovative and cost-effective technologies for antibiotics removal from wastewater. In this context, various microbial electrochemical systems have been investigated as an alternative to conventional wastewater technologies that are usually ineffective for the adequate removal of antibiotics. This review article details the development of stand-alone and hybrid or integrated microbial electrochemical systems for antibiotics removal from wastewater. First, technical features, antibiotics removal efficiencies, process optimization, and technological bottlenecks of these systems are discussed. Second, a comparative summary based on the existing reports was established to provide insights into the selection between stand-alone and hybrid systems. Finally, research gaps, the relevance of recent progress in complementary areas, and future research needs have been discussed.

Efficient removal of tetracycline using U-type continuous-flow bioelectrochemical system without ion exchange membrane or cathodic catalyst

A U-type membraneless continuous-flow bioelectrochemical system was developed to efficiently remove tetracycline and antibiotic resistance genes from synthetic wastewaters at hydraulic retention time of only eight hours. At the TC concentration of 20-80 mgL^-1 in feed, the removals of tetracycline all exceeded 95%, over 60-1200 mgL^-1 chemical oxygen demand, 30-150 mgL^-1 NH₄⁺-N, and at 5-25 °C, superior to the performances reported in literature. The maximum power of the BES system peaked at 0.416 Wm^-3 at 20 mgL^-1 TC feeding, corresponding to open circle voltage of 0.90 V and internal resistance of 799.8 Ω. The community analysis showed that the elevated TC loadings forced the predominate population to be evolved to TC-degrading consortium. The relative abundances of tetA, tetC, tetO, tetQ, and tetW in treated effluent ranged 1.20 × 10^-6 to 2.60 × 10^-4, revealing that the present BES reactor has superior removal efficiency of antibiotic resistance genes.

Degradation of pyrene using single-chamber air-cathode microbial fuel cells: Electrochemical parameters and bacterial community changes

Pyrene, a typical four-ring polycyclic aromatic hydrocarbon, is abundantly present in the environment and is potentially harmful to the human body. In this study, single-chamber air-cathode microbial fuel cells (MFCs) were used to treat pyrene, and the ensuing degradation, electrical parameters, and microbial changes were analyzed. The results showed that MFCs could degrade pyrene, and the maximum degradation rate for 30 mg/L reached 88.1 ± 5.4%. The addition of pyrene reduced the electrical performance of the MFCs and suppressed the power output. Analysis of the anodic microbial community showed that the proportion of Alcaligenes and Stenotrophomonas increased with an increase in pyrene concentration, which may explain the high degradation rate of pyrene.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

A review of the bioelectrochemical system as an emerging versatile technology for reduction of antibiotic resistance genes

Antibiotic contamination and the resulting resistance genes have attracted worldwide attention because of the extensive overuse and abuse of antibiotics, which seriously affects the environment as well as human health. Bioelectrochemical system (BES), a potential avenue to be explored, can alleviate antibiotic pollution and reduce antibiotic resistance genes (ARGs). This review mainly focuses on analyzing the possible reasons for the good performance of ARG reduction by BESs and potential ways to improve its performance on the basis of revealing the generation and transmission of ARGs in BES. This system reduces ARGs through two pathways: (1) the contribution of BES to the low selection pressure of ARGs caused by the efficient removal of antibiotics, and (2) inhibition of ARG transmission caused by low sludge yield. To promote the reduction of ARGs, incorporating additives, improving the removal rate of antibiotics by adjusting the environmental conditions, and controlling the microbial community in BES are proposed. Furthermore, this review also provides an overview of bioelectrochemical coupling systems including the BES coupled with the Fenton system, BES coupled with constructed wetland, and BES coupled with photocatalysis, which demonstrates that this method is applicable in different situations and conditions and provides inspiration to improve these systems to control ARGs. Finally, the challenges and outlooks are addressed, which is constructive for the development of technologies for antibiotic and ARG contamination remediation and blocking risk migration.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

Neolignans from Piper betle Have Synergistic Activity against Antibiotic-Resistant Staphylococcus aureus

A phytochemical investigation of an extract of the leaves of Piper betle, guided by a synergistic antibacterial screen, led to the isolation and structural elucidation of 10 new neolignans, Pibeneolignan A-J (1-10), together with 11 known compounds. The structures and absolute configurations of the new compounds were elucidated on the basis of spectroscopic data, single-crystal X-ray diffraction analysis, and experimental and calculated ECD investigations. Compounds 1 and 2 are new naturally occurring neolignan skeletons, based on the cyclohept-2-ene-1,4-dione framework. We propose that these natural products are biosynthetically formed from bicyclic [3.2.1] neolignans by oxidative cleavage and ring opening at C-1' and C-2'. Among these compounds, 9, 13, 15, and 16, in combination with norfloxacin against an effluxing S. aureus strain (SA1199B), exhibited significant synergistic activity with fractional inhibitory concentration indices (FICIs) of 0.078, 0.156, 0.125, and 0.25, respectively. Bacterial growth curves, ethidium bromide (EtBr) efflux, and qRt-PCR were further employed to verify their synergistic antibacterial mechanism. Furthermore, computational molecular modeling suggested the binding of compounds 14-17 and 19 to the active site of the modeled structure of the NorA efflux pump, which is the main efflux pump in SA1199B.

Rapid degradation of norfloxacin by VUV/Fe2+/H2O2 over a wide initial pH: Process parameters, synergistic mechanism, and influencing factors

Vacuum UV (VUV) technology has attracted much attention because it effectively splits water to generate reactive oxygen species (ROS) in situ and has the advantages of UV. So far, the synergistic mechanisms, formation pathways and contributions of ROS in VUV/Fe²⁺/H₂O₂ process have not been extensively studied. Herein, complete removal (at 4 min) and 63.3% mineralization (at 8 min) of 45 μM norfloxacin (NOR) were achieved at neutral pH by VUV/Fe²⁺/H₂O₂ (90 μM Fe²⁺ and 3 mM H₂O₂). Compared with its subsystems, VUV/Fe²⁺/H₂O₂ can not only increase the pseudo-first-order reaction rate constant of NOR removal by 2.3-14.9 times and increase the mineralization by 20.4-59.4%, but also reduce the residual ratio of H₂O₂ by 19.9-70.1% and reduce total cost by 20.0-68.0%. The synergy factor of VUV/Fe²⁺/H₂O₂ was 3.97, which was attributed to the VUV irradiation promoting iron redox cycle and H₂O₂ decomposition. Moreover, hydroxyl radical and superoxide radical, which were identified as the main ROS, contributed 79.07% and 18.47% to NOR removal, respectively. Degradation pathways of NOR were proposed. Furthermore, effects of coexisting ions and dissolved organic matter were investigated. As an energy-saving and efficient process, the satisfactory results of VUV/Fe²⁺/H₂O₂ applied in real waters also highlight its application potential.

Simultaneous sulfamethoxazole degradation with electricity generation by microbial fuel cells using Ni-MOF-74 as cathode catalysts and quantification of antibiotic resistance genes

Antibiotic wastewater presents serious challenges in water treatment. Metal-organic frameworks (MOFs) have received significant attention as promising precursors and sacrificial templates in the preparation of porous carbon-supported catalysts. Herein, we investigated the sulfamethoxazole (SMX) degradation and electrochemical performance of microbial fuel cells (MFCs) that applied as-prepared Ni-MOF-74 and Ni-N-C (Ni-MOF-74 underwent pyrolysis treatment at different temperatures) as air-cathode catalyst. Firstly, the electrocatalytic activity towards oxygen reduction reaction (ORR) of the catalyst was investigated by rotating disk electrode. The results showed that electron transfer number for Ni-MOF-74 was 2.12, while that of 800Ni-N-C was 3.44, which was close to four-electron reduction. Applying Ni-MOF-74 in MFCs, a maximum power density of 446 mW/m² was obtained, which was close to that of 800Ni-N-C. Besides, using Ni-MOF-74 as cathode catalyst, a chemical oxygen demand removal rate of about 84% was obtained, and the degradation rate of 10 mg/L SMX was 61%. The degradation rate decreased with increasing antibiotic concentration, but the average degradation efficiency increased stepwise. Additionally, the relative abundance of resistant gene sul1 in the reactors of the new catalytic material was about 62% lower than that of sul1 in the control (Pt/C) reactors, and the relative abundance of sul2 was about 73% lower. Moreover, cost assessments related to the catalyst performance are presented. The findings of this study demonstrated that Ni-MOF-74 could be considered as a two-electron transfer ORR catalyst, and offers a promising technique for preparation of Ni-N-C for use as four-electron transfer ORR catalysts. In comparison, Ni-MOF-74 could be a promising ORR catalyst of MFCs for antibiotic degradation.

Antibiotics in wastewater: From its occurrence to the biological removal by environmentally conscious technologies

In this critical review, we explored the most recent advances about the fate of antibiotics on biological wastewater treatment plants (WWTP). Although the occurrence of these pollutants in wastewater and natural streams has been investigated previously, some recent publications still expose the need to improve the detection strategies and the lack of information about their transformation products. The role of the antibiotic properties and the process operating conditions were also analyzed. The pieces of evidence in the literature associate several molecular properties to the antibiotic removal pathway, like hydrophobicity, chemical structure, and electrostatic interactions. Nonetheless, the influence of operating conditions is still unclear, and solid retention time stands out as a key factor. Additionally, the efficiencies and pathways of antibiotic removals on conventional (activated sludge, membrane bioreactor, anaerobic digestion, and nitrogen removal) and emerging bioprocesses (bioelectrochemical systems, fungi, and enzymes) were assessed, and our concern about potential research gaps was raised. The combination of different bioprocess can efficiently mitigate the impacts generated by these pollutants. Thus, to plan and design a process to remove and mineralize antibiotics from wastewater, all aspects must be addressed, the pollutant and process characteristics and how it is the best way to operate it to reduce the impact of antibiotics in the environment.