Recent advances in organosolv fractionation: Towards biomass fractionation technology of the future

ALACEN: A Holistic Herbaceous Biomass Fractionation Process Attaining a Xylose-Rich Stream for Direct Microbial Conversion to Bioplastics

Lignocellulose biorefining is a promising technology for the sustainable production of chemicals and biopolymers. Usually, when one component is focused on, the chemical nature and yield of the others are compromised. Thus, one of the bottlenecks in biomass biorefining is harnessing the maximum value from all of the lignocellulosic components. Here, we describe a mild stepwise process in a flow-through setup leading to separate flow-out streams containing cinnamic acid derivatives, glucose, xylose, and lignin as the main components from different herbaceous sources. The proposed process shows that minimal degradation of the individual components and conservation of their natural structure are possible. Under optimized conditions, the following fractions are produced from wheat straw based on their respective contents in the feed by the ALkaline ACid ENzyme process: (i) 78% ferulic acid from a mild ALkali step, (ii) 51% monomeric xylose free of fermentation inhibitors by mild ACidic treatment, (iii) 82% glucose from ENzymatic degradation of cellulose, and (iv) 55% native-like lignin. The benefits of using the flow-through setup are demonstrated. The retention of the lignin aryl ether structure was confirmed by HSQC NMR, and this allowed monomers to form from hydrogenolysis. More importantly, the crude xylose-rich fraction was shown to be suitable for producing polyhydroxybutyrate bioplastics. The direct use of the xylose-rich fraction by means of the thermophilic bacteria Schlegelella thermodepolymerans matched 91% of the PHA produced with commercial pure xylose, achieving 138.6 mgPHA/gxylose. Overall, the ALACEN fractionation method allows for a holistic valorization of the principal components of herbaceous biomasses.

Synthesis and Characterization of Lignin-Silver Nanoparticles

Metal nanoparticle synthesis via environmentally friendly methods is gaining interest for their potential advantages over conventional physico-chemical approaches. Herein, we propose a robust green synthesis route for lignin-modified silver nanoparticles, utilizing the recovery of lignin as a renewable raw material and exploring its application in valuable areas. Through a systematic approach combining UV-Vis spectroscopy with AAS and DLS, we identified repeatable and scalable reaction conditions in an aqueous solution at pH 11 for homogeneous silver nanoparticles with high uniformity. The TEM median sizes ranged from 12 to 15 nm with circularity between 0.985 and 0.993. The silver nanoparticles yield exceeded 0.010 mol L-1, comparable with traditional physico-chemical methods, with a minimal loss of silver precursor ranging between 0.5 and 3.9%. Characterization by XRD and XPS revealed the presence of Ag-O bonding involving lignin functional groups on the pure face-centered cubic structure of metallic silver. Moreover, the lignin-modified silver nanoparticles generated a localized thermal effect upon near-infrared laser irradiation (808 nm), potentially allowing for targeted applications in the biomedical field. Our study showcases the potential of lignin as a renewable reducing and capping agent for silver nanoparticle synthesis, addressing some shortcomings of green synthesis approaches and contributing to the development of suitable nanomaterials.

Extraction, recovery, and characterization of lignin from industrial corn stover lignin cake

Lignin utilization in value-added co-products is an important component of enabling cellulosic biorefinery economics. However, aqueous dilute acid pretreatments yield lignins with limited applications due to significant modification during pretreatment, low solubility in many solvents, and high content of impurities (ash, insoluble polysaccharides). This work addresses these challenges and investigates the extraction and recovery of lignins from lignin-rich insoluble residue following dilute acid pretreatment and enzymatic hydrolysis of corn stover using three extraction approaches: ethanol organosolv, NaOH, and an ionic liquid. The recovered lignins exhibited recovery yields ranging from 30% for the ionic liquid, 44% for the most severe acid ethanol organosolv condition tested, and up to 86% for the most severe NaOH extraction condition. Finally, the fractional solubilities of different recovered lignins were assessed in a range of solvents and these solubilities were used to estimate distributions of Hildebrand and Hansen solubility parameters using a novel approach.

Furan Distribution as a Severity Indicator upon Organosolv Fractionation of Hardwood Sawdust through a Novel Ternary Solvent System

Beech sawdust was treated with a ternary solvent system based on binary aqueous ethanol with partial substitution of ethanol by acetone at four different water contents (60, 50, 40, and 30%v/v). In addition to standard, i.e., noncatalyzed treatments, the application of inorganic acid in the form of 20 mm H2SO4 was evaluated. The various solvent systems were applied at 180 °C for 60 min. The obtained biomass fractions were characterized by standard biomass compositional methods, i.e., sugar monomer and oligomer contents, dehydration product contents of the aqueous product, and lignin, cellulose, and hemicellulose contents in isolated solid fractions. More advanced analyses were performed on the lignin fractions, including quantitative 13C NMR analyses, 1H-13C HSQC analysis, size exclusion chromatography, and pyrolysis-GC/MS, and the aqueous product, in the form of size exclusion chromatography and determination of total phenol contents. The picture emerging from the thorough analytical investigation performed on the lignin fractions is consistent with that resulting from the characterization of the other fractions: results point toward greater deconstruction of the lignocellulosic recalcitrance upon higher organic solvent content, replacing ethanol with acetone during the extraction, and upon addition of mineral acid. A pulp with cellulose content of 94.23 wt % and 95% delignification was obtained for the treatment employing a 55/30/15 EtOH/water/acetone mixture alongside 20 mm H2SO4. Furthermore, the results indicate the formation of two types of organosolv furan families during treatment, which differ in the substitution of their C1 and C5. While the traditional lignin aryl-ether linkages present themselves as indicators for process severity for the nonacid catalyzed systems, the distribution of these furan types can be applied as a severity indicator upon employment of H2SO4, including their presence in the isolated lignin fractions.

Lignin Modification for Enhanced Performance of Polymer Composites

The biopolymer lignin, which is heterogeneous and abundant, is usually present in plant cell walls and gives them rigidity and strength. As a byproduct of the wood, paper, and pulp manufacturing industry, lignin ranks as the second most prevalent biopolymer worldwide, following cellulose. This review paper explores the extraction, modification, and prospective applications of lignin in various industries, including the enhancement of thermosetting and thermoplastic polymers, biomedical applications such as vanillin production, fuel development, carbon fiber composites, and the creation of nanomaterials for food packaging and drug delivery. The structural characteristics of lignin remain undefined due to its origin, separation, and fragmentation processes. This comprehensive overview encompasses state-of-the-art techniques, potential applications, diverse extraction methods, chemical modifications, carbon fiber utilization, and the extraction of vanillin. Moreover, the review focuses on the utilization of lignin-modified polymer blends across multiple manufacturing sectors, providing insights into the advantages and limitations of this innovative approach for the development of environmentally friendly materials.

Organosolv pretreatment: an in-depth purview of mechanics of the system

The concept of biorefinery has been advancing globally and organosolv pretreatment strategy has seen an upsurge in research due to its efficiency in removing the recalcitrant lignin and dissolution of cellulose. The high-performance organosolv system uses green solvents and its reusability contributes concurrently to the biorefinery sector and sustainability. The major advantage of the current system involves the continuous removal of lignin to enhance cellulose accessibility, thereby easing the later biorefinery steps, which were immensely restricted due to the recalcitrant lignin. The current system process can be further explored and enhanced via the amalgamation of new technologies, which is still a work in progress. Thus, the current review summarizes organosolv pretreatment and the range of solvents used, along with a detailed mechanistic approach that results in efficient pretreatment of LCB. The latest developments for designing high-performance pretreatment systems, their pitfalls, and advanced assessments such as Life Cycle Assessment along with Techno-Economic Assessment have also been deliberated to allow an insight into its diverse potential applicability towards a sustainable future.

Advances on Cellulose Manufacture in Biphasic Reaction Media

Cellulose is produced industrially by the kraft and sulfite processes. The evolution of these technologies in biorefineries is driven by the need to obtain greater added value through the efficient use of raw materials and energy. In this field, organosolv technologies (and within them, those using liquid phases made up of water and one partly miscible organic solvent, known as "biphasic fractionation" in reference to the number of liquid phases) represent an alternative that is receiving increasing interest. This study considers basic aspects of the composition of lignocellulosic materials, describes the fundamentals of industrial cellulose pulp production processes, introduces the organosolv methods, and comprehensively reviews published results on organosolv fractionation based on the use of media containing water and an immiscible solvent (1-butanol, 1-pentanol or 2-methyltetrahydrofuran). Special attention is devoted to aspects related to cellulose recovery and fractionation selectivity, measured through the amount and composition of the treated solids.

Improvement of enzymatic saccharification by simultaneous pulping of sugarcane bagasse and washing of its cellulose fibers in a batch reactor

A modification of the conventional batch organosolv process is proposed in a way where the solid biomass remains inside a basket, physically separated from the liquid phase, with the vapor promoting the fractionation of the biomass and the extracted compounds and fragments being washed down to the liquid phase. The modified organosolv process applied to sugarcane bagasse (SB-M) delivers a rich cellulosic solid phase that after enzymatic hydrolysis leads to a hydrolyzed with approximately 100 g L-1 of glucose. At the same enzymatic hydrolysis conditions, the conventional organosolv process (SB-C) delivers a hydrolyzed with 80 g L-1 of glucose, while the autohydrolysis process (SB-A) leads to 55 g L-1 of glucose. These different results are related to the cellulose content: SB-M (70%), SB-C (57%), e SB-A (44%), as well the reduced lignin content in the SB-M. The novelty of this study is the confirmation that it is possible to degrade lignin from sugarcane bagasse and simultaneously remove its fragments from the cellulose fibers in a batch reactor containing an internal basket. This study describes a simple and rapid protocol for the isolation of the main components of lignocellulosic biomass (cellulose, hemicellulose, and lignin), which may lead to the study of new catalysts for the chemical transformation of these components separately or simultaneously to the step of pretreatment.

Lignins as Promising Renewable Biopolymers and Bioactive Compounds for High-Performance Materials

The recycling of biomass into high-value-added materials requires important developments in research and technology to create a sustainable circular economy. Lignin, as a component of biomass, is a multipurpose aromatic polymer with a significant potential to be used as a renewable bioresource in many fields in which it acts both as promising biopolymer and bioactive compound. This comprehensive review gives brief insights into the recent research and technological trends on the potential of lignin development and utilization. It is divided into ten main sections, starting with an outlook on its diversity; main properties and possibilities to be used as a raw material for fuels, aromatic chemicals, plastics, or thermoset substitutes; and new developments in the use of lignin as a bioactive compound and in nanoparticles, hydrogels, 3D-printing-based lignin biomaterials, new sustainable biomaterials, and energy production and storage. In each section are presented recent developments in the preparation of lignin-based biomaterials, especially the green approaches to obtaining nanoparticles, hydrogels, and multifunctional materials as blends and bio(nano)composites; most suitable lignin type for each category of the envisaged products; main properties of the obtained lignin-based materials, etc. Different application categories of lignin within various sectors, which could provide completely sustainable energy conversion, such as in agriculture and environment protection, food packaging, biomedicine, and cosmetics, are also described. The medical and therapeutic potential of lignin-derived materials is evidenced in applications such as antimicrobial, antiviral, and antitumor agents; carriers for drug delivery systems with controlled/targeting drug release; tissue engineering and wound healing; and coatings, natural sunscreen, and surfactants. Lignin is mainly used for fuel, and, recently, studies highlighted more sustainable bioenergy production technologies, such as the supercapacitor electrode, photocatalysts, and photovoltaics.

Covalently bound humin-lignin hybrids as important novel substructures in organosolv spruce lignins

Organosolv lignins (OSLs) are important byproducts of the cellulose-centred biorefinery that need to be converted in high value-added products for economic viability. Yet, OSLs occasionally display characteristics that are unexpected looking at the lignin motifs present. Applying advanced NMR, GPC, and thermal analyses, isolated spruce lignins were analysed to correlate organosolv process severity to the structural details for delineating potential valorisations. Very mild conditions were found to not fractionate the biomass, causing a mix of sugars, lignin-carbohydrate complexes (LCCs), and corresponding dehydration/degradation products and including pseudo-lignins. Employing only slightly harsher conditions promote fractionation, but also formation of sugar degradation structures that covalently incorporate into the oligomeric and polymeric lignin structures, causing the isolated organosolv lignins to contain lignin-humin hybrid (HLH) structures not yet evidenced as such in organosolv lignins. These structures effortlessly explain observed unexpected solubility issues and unusual thermal responses, and their presence might have to be acknowledged in downstream lignin valorisation.

Fractionation of lignin from rice straw using an acidified biphasic solvent system

To obtain lignin from lignocellulosic biomass, phenoxyethanol (EPH) was employed to construct a biphasic solvent system. The concentration of EPH in this biphasic solvent system was first studied to determine a pretreatment condition for fractionation of lignin. Then, the fractionation of lignin from rice straw was performed under the conditions of temperature 130 °C, cooking time 60 min and sulfuric acid concentration 0.1 M, in 70 % aqueous EPH solvent system. The results showed that 50.97 %, 49.52 % or 82.02 % of the removed lignin with the purity of 89.04 %, 91.30 % or 84.76 % was regenerated from EPH liquor using dimethyl carbonate (DMC), dimethoxymethane (DMM) or diethyl ether (DE) as precipitant, respectively. Additionally, the weight-average molecular weight (Mw) and dispersity index (Đ) of the regenerated lignin decreased to 4247-4809 g/mol and 1.26-1.60 compared with that of the original lignin (5654 g/mol and 4.78). Finally, the compositional and structural characteristics of lignin, e.g., molecular weight and molecular structure, were also investigated by DSC, HSQC and elemental analysis.

Diffusion in Intact Secondary Cell Wall Models of Plants at Different Equilibrium Moisture Content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na⁺, K⁺, Cu²⁺, Cl^-) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

Agricultural Residues as Raw Materials for Pulp and Paper Production: Overview and Applications on Membrane Fabrication

The need for pulp and paper has risen significantly due to exponential population growth, industrialization, and urbanization. Most paper manufacturing industries use wood fibers to meet pulp and paper requirements. The shortage of fibrous wood resources and increased deforestation are linked to the excessive dependence on wood for pulp and paper production. Therefore, non-wood substitutes, including corn stalks, sugarcane bagasse, wheat, and rice straw, cotton stalks, and others, may greatly alleviate the shortage of raw materials used to make pulp and paper. Non-woody raw materials can be pulped easily using soda/soda-AQ (anthraquinone), organosolv, and bio-pulping. The use of agricultural residues can also play a pivotal role in the development of polymeric membranes separating different molecular weight cut-off molecules from a variety of feedstocks in industries. These membranes range in applications from water purification to medicinal uses. Considering that some farmers still burn agricultural residues on the fields, resulting in significant air pollution and health issues, the use of agricultural residues in paper manufacturing can eventually help these producers to get better financial outcomes from the grown crop. This paper reviews the current trends in the technological pitch of pulp and paper production from agricultural residues using different pulping methods, with an insight into the application of membranes developed from lignocellulosic materials.

Efficient downstream valorization of lignocellulose after organosolv fractionation: Synergistic enhancement of waterborne coatings by co-assembled lignin@cellulose nanocrystals

The simultaneous downstream valorization of cellulose and lignin is an important aspect of efficiently extracting value from lignocellulose. The present work, we demonstrated the preparation of a novel bio-based filler by the co-assembly of cellulose and lignin obtained from a one-pot ethanosolv lignocellulose fractionation process. The cellulose was valorized by forming cellulose nanocrystals (CNCs) through simple bleaching and ultrasonication processes. The lignin fractions demonstrated greater solubility (19.2 mg/mL) and lower molecular weight (6980 g/mol) than conventional industrial lignins. Various lignin@CNCs specimens were prepared via a facile co-assembly of the lignin and CNCs. These entirely bio-based materials could be used as a multifunctional filler to enhance the properties of a waterborne coating (WBC). Specifically, the mechanical properties, coating performance and ultraviolet resistance of a WBC were all significantly improved, demonstrating a synergistic enhancement effect obtained from the CNCs and lignin. In this manner, both cellulose and lignin components were efficiently transformed to value-added fillers for WBC, demonstrating a highly efficient pathway for lignocellulose utilization and downstream value-added applications.

Challenges and perspectives of green-like lignocellulose pretreatments selectable for low-cost biofuels and high-value bioproduction

Lignocellulose represents the most abundant carbon-capturing substance that is convertible for biofuels and bioproduction. Although biomass pretreatments have been broadly applied to reduce lignocellulose recalcitrance for enhanced enzymatic saccharification, they mostly require strong conditions with potential secondary waste release. By classifying all major types of pretreatments that have been recently conducted with different sources of lignocellulose substrates, this study sorted out their distinct roles for wall polymer extraction and destruction, leading to the optimal pretreatments evaluated for cost-effective biomass enzymatic saccharification to maximize biofuel production. Notably, all undigestible lignocellulose residues are also aimed for effective conversion into value-added bioproduction. Meanwhile, desired pretreatments were proposed for the generation of highly-valuable nanomaterials such as cellulose nanocrystals, lignin nanoparticles, functional wood, carbon dots, porous and graphitic nanocarbons. Therefore, this article has proposed a novel strategy that integrates cost-effective and green-like pretreatments with desirable lignocellulose substrates for a full lignocellulose utilization with zero-biomass-waste liberation.

Biphasic fractionation of lignocellulosic biomass based on the combined action of pretreatment severity and solvent effects on delignification

A novel method based on pretreatment severity and solvent effects on delignification, was introduced to pretreat and fractionate lignocellulose in a 2-phenoxyethanol (EPH) biphasic solvent system. The combined severity factor (CSF) was used to regulate pretreatment severity, and the relative energy difference (RED) of solvent system to lignin was used to evaluate solvent effects. The combined action of pretreatment severity and solvent effects on delignification was first investigated by the response surface regression analysis on the pretreatment of Amorpha. Accordingly, pretreatment and fractionation of Amorpha, poplar and corn straw were then conducted under the optimized conditions. Results showed that >99 % lignin was removed after pretreatment with CSF 3.7845 in a solvent system with RED 0.9371, and 42.94 %, 39.41 % and 70.90 % lignin from Amorpha, poplar and corn straw were respectively regenerated from organosolv liquor after fractionation. Finally, the regenerated products were characterized by FTIR, TG and GPC analysis.

Organosolv pretreatment for biorefineries: Current status, perspectives, and challenges

Biorefineries integrate processes for the sustainable conversion of biomass into chemicals, materials, and bioenergy so that resources are optimized and effluents are minimized. Despite the vast potential of lignocellulosic biorefineries, their success depends heavily on effective, economically viable, and sustainable biomass fractionation. Although efficient, organosolv pretreatment still faces challenges that must be overcome for its widespread utilization, mainly related to solvent type and recycling, robustness regarding biomass type and integration of hemicellulose recovery and use. This review shows the recent advances and state-of-the-art of organosolv pretreatment, discussing the advances, such as the use of biobased solvents, whilst also shedding light on the perspectives of using the streams - cellulose, hemicellulose, and lignin - to produce biofuels and products of high added value. In addition, it presents an overview of the existing industrial implementations of organosolv processes and, lastly, shows the main scientific and industrial challenges and opportunities for this process.

Revealing the relationship between molecular weight of lignin and its color, UV-protecting property

Lignin has great potential as a natural, green, and sustainable broad-spectrum sunscreen active ingredient. However, the coexistence of dark color and sunscreen properties hinders its application in cosmetics. In this study, we focus on the effects of the molecular weight of lignin on tis UV-protecting property and color in order to prepare lignin-based sunscreen with high performance. A prepared sunscreen containing low molecular weight lignin (F5, <1000 g/mol) exhibits good UV-protecting property (sun protection factor (SPF) = 7.14) and light color advantages (ΔE = 46.2). Moreover, a strong synergistic effect on UV-protecting property exists between low molecular weight lignin and ethylhexyl methoxycinnamate (EHMC), resulting in high SPF of F5@EHMC-based sunscreen (55.56). Additionally, added TiO2 can efficiently mitigate the dark color of lignin-based sunscreens due to prominent covering power of TiO2. Moreover, lignin-based sunscreens have good biocompatibility with HaCaT cells. This work is useful for understanding the mechanism of the UV-protecting property and dark color of lignin, and for designing an efficient and safe lignin-based sunscreen.

Organosolv Lignin as a Green Sizing Agent for Thermoformed Pulp Products

The purpose of this study was to investigate the use of organosolv lignin as a sizing agent for thermoformed pulp products as a sustainable material with improved water resistance. For this purpose, an in-house-produced organosolv lignin from softwood (Norway Spruce) was mixed with bleached and unbleached chemi-thermomechanical pulp fibers. In addition, the isolated organosolv lignin was characterized by ATR-FTIR spectroscopy, size-exclusion chromatography, and thermogravimetric analysis. The analysis showed that organosolv lignin was of a high purity and practically ash-free, exhibiting low molecular weight, a glass transition temperature below the thermoforming temperature, and a high content of phenolic OH groups. The mechanical properties and water resistance of the organosolv lignin-sized thermoformed pulp materials were measured. A small decrease in strength and an increase in stiffness and density were observed for the lignin-sized thermoformed materials compared to the reference, that is, unsized materials. The addition of organosolv lignin decreased the wettability and swelling of the thermoformed product. These results are due to the distribution of organosolv lignin on the surface, filling in the pores and cavities, and providing a tighter fit within the thermoformed materials. In conclusion, the results from our study encourage the use of organosolv lignin as a sizing additive to thermoformed products, which can improve the water resistance to use it in sustainable packaging applications.

Synthesis and Characterization of Poly(lactic acid) Composites with Organosolv Lignin

Lignin, being one of the main structural components of lignocellulosic biomass, is considered the most abundant natural source of phenolics and aromatics. Efforts for its valorisation were recently explored as it is mostly treated as waste from heat/energy production via combustion. Among them, polymer-based lignin composites are a promising approach to both valorise lignin and to fine tune the properties of polymers. In this work, organosolv lignin, from beech wood, was used as fillers in a poly (lactic acid) (PLA) matrix. The PLA/lignin composites were prepared using melt mixing of masterbatches with neat PLA in three different lignin contents: 0.5, 1.0 and 2.5 wt%. Lignin was used as-isolated, via the organosolv biomass pretreatment/fractionation process and after 8 h of ball milling. The composites were characterised with Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, X-ray Diffraction (XRD), and Differential Scanning Calorimetry (DSC). Additionally, their antioxidant activity was assessed with the 2,2-Diphenyil-1-picrylhydrazyl (DPPH) method, the colour was measured with a colorimeter and the mechanical properties were evaluated with tensile testing. Ball milling, at least under the conditions applied in this study, did not induce a further substantial decrease in the already relatively small organosolv lignin primary particles of ~1 μm. All the produced PLA/lignin composites had a uniform dispersion of lignin. Compression-moulded films were successfully prepared, and they were coloured brown, with ball-milled lignin, giving a slightly lighter colour in comparison with the as-received lignin. Hydrogen bonding was detected between the components of the composites, and crystallization of the PLA was suppressed by both lignin, with the suppression being less pronounced by the ball-milled lignin. All composites showed a significantly improved antioxidant activity, and their mechanical properties were maintained for filler content 1 wt%.

Physicochemical characteristics of organosolv lignins from different lignocellulosic agricultural wastes

Lignin is a promising alternative to petrochemical precursors for conversion to industrial-needed products. Organosolv lignins were extracted from different agricultural wastes including sugarcane bagasse (BG) and trash (ST), corncob (CC), eucalyptus wood (EW), pararubber woodchip (PRW), and palm wastes (palm kernel cake (PKC), palm fiber (PF), and palm kernel shell (PKS), representing different groups of lignin origins. Physicochemical characteristics of lignins were analyzed by several principal techniques. Most recovered lignin showed high purity of >90 % with trace sugar contamination, while lower purities were found for lignin from palm wastes. Hardwood lignins (EW and PRW) mainly contained guaiacyl (G) and syringyl (S) units with a minor fraction of p-hydroxyphenyl units (H) with high molecular weight, glass transition temperature, phenolic hydroxy group and low aliphatic hydroxy group. Grass-type lignins (BG, ST, CC) and palm lignins (PKC, PF, and PKS) contained three monolignols of H, G, and S units with lower molecular weights and C₅-substituted hydroxy of S unit. Among the grass-type lignins, PKC lignin contained the highest nitrogen and lipophilic components with the lowest molecular weight, thermal stability, and glass transition temperature. This provides insights into properties of organosolv lignin as basis for their further applications in chemical, polymer and material industries.

Valorization of lignins from energy crops and agro-industrial byproducts as antioxidant and antibacterial materials

BACKGROUND

Developing eco-friendly antioxidant and antimicrobial substances originating from biomass residues has recently attracted considerable interest. In this study, two lignosulfonates and various oxidized water-soluble lignins were investigated for their antioxidant properties, as assessed by ABTS, DPPH and Folin-Ciocalteu methods, and their antimicrobial activity against some bacterial strains responsible for human pathologies.

RESULTS

The lignosulfonates showed the largest antiradical/antimicrobial capacity, whereas the other substrates were less effective. The observed antioxidant/antibacterial properties were positively correlated with lignin aromatic/phenolic content. The positive correlation between antiradical and antimicrobial activities suggests that lignin scavenging capacity was also involved in its antibacterial activity. A greater antimicrobial performance was generally observed against Gram-positive bacterial strains, and it was attributed to the intrinsic larger susceptibility of Gram-positive bacteria to lignin phenols. A significant though lesser inhibitory activity was also found against Escherichia coli.

CONCLUSION

Our results confirmed the dependence of lignin antioxidant/antibacterial power on its extraction method and chemical structure, as well as on the type of bacterial strains. Identifying the relationship between lignin molecular composition and its antioxidant/antibacterial features represents an advance on the potential future use of renewable and eco-compatible lignin materials in nutraceutical, pharmaceutical and cosmetic sectors. © 2021 Society of Chemical Industry.

Lignin valorization: Status, challenges and opportunities

As an abundant aromatic biopolymer, lignin has the potential to produce various chemicals, biofuels of interest through biorefinery activities and is expected to benefit the future circular economy. However, lignin valorization is hindered by a series of constraints such as heterogeneous polymeric nature, intrinsic recalcitrance, strong smell, dark colour, challenges in lignocelluloses fractionation and the presence of high bond dissociation enthalpies in its functional groups etc. Nowadays, industrial lignin is mostly combusted for electricity production and the recycling of inorganic compounds involved in the pulping process. Given the research and development on lignin valorization in recent years, important applications such as lignin-based hydrogels, surfactants, three-dimensional printing materials, electrodes and production of fine chemicals have been systematically reviewed. Finally, this review highlights the main constraints affecting industrial lignin valorization, possible solutions and future perspectives, in the light of its abundance and its potential applications reported in the scientific literature.

Lytic polysaccharide monooxygenases as powerful tools in enzymatically assisted preparation of nano-scaled cellulose from lignocellulose: A review

Nanocellulose, either in the form of fibers or crystals, constitutes a renewable, biobased, biocompatible material with advantageous mechanical properties that can be isolated from lignocellulosic biomass. Enzyme-assisted isolation of nanocellulose is an attractive, environmentally friendly approach that leads to products of higher quality compared to their chemically prepared counterparts. Lytic polysaccharide monooxygenases (LPMOs) are enzymes that oxidatively cleave the β-1,4-glycosidic bond of polysaccharides upon activation of O₂ or H₂O₂ and presence of an electron donor. Their use for treatment of cellulose fibers towards the preparation of nano-scaled cellulose is related to the ability of LPMOs to create nicking points on the fiber surface, thus facilitating fiber disruption and separation. The aim of this review is to describe the mode of action of LPMOs on cellulose fibers towards the isolation of nanostructures, thus highlighting their great potential for the production of nanocellulose as a novel value added product from lignocellulose.

Simulation and optimization of organosolv based lignocellulosic biomass refinery: A review

Organosolv pretreatment can be considered as the core of the lignocellulosic biomass fractionation within the biorefinery concept. Organosolv facilitates the separation of the major fractions (cellulose, hemicelluloses, lignin), and their use as renewable feedstocks to produce bioenergy, biofuels, and added-value biomass derived chemicals. The efficient separation of these fractions affects the economic feasibility of the biorefinery complex. This review focuses on the simulation of the organosolv pretreatment and the optimization of (i) feedstock delignification, (ii) sugars production (mainly from hemicelluloses), (iii) enzymatic digestibility of the cellulose fraction and (iv) quality of lignin. Simulation is used for the technoeconomic optimization of the biorefinery complex. Simulation and optimization implement a holistic approach considering the efficient technological, economic, and environmental performance of the biorefinery operational units. Consequently, an optimized organosolv stage is the first step for a sustainable, economically viable biorefinery complex in the concept of industrial ecology and zero waste circular economy.

Organosolv pretreated birch sawdust for the production of green hydrogen and renewable chemicals in an integrated biorefinery approach

Sustainable production of fuels and chemicals is the most important way to reduce the carbon footprint in the environment. Forest based abundant lignocellulosic biomass as a renewable feedstock can be an attractive source of biofuels and biochemicals. This study evaluated the production of hydrogen (H₂) along with platform chemicals from an organosol pretreated birch sawdust (SD). Acidogenic fermentation (AF) of pretreated SD resulted in production of green H₂ (121.4 mL/gVS) along with short (17.8 g/L) and medium (2.64 g/L) chain carboxylic acids. Further integration of AF with anaerobic digestion (AD) in a biorefinery framework offered production of biomethane (bioCH₄: 246 mL/gVS) from the leftover SD from AF. Integration of bioH₂ with bioCH₄ at different time interval of digestion showed 8-14 L biohythane formation ran with a H₂ fraction of 1.6-0.3 H₂/(H₂ + CH₄) documenting energy content of 8-9.08 kJ/gVS.

Organosolv fractionation of spruce bark using ethanol-water mixtures: Towards a novel bio-refinery concept

The aim of this study was to assess the effect of hot water extraction followed by organosolv pretreatment on the enzymatic hydrolysability of spruce bark biomass. To this end, samples were pretreated at five different temperatures in the presence or not of acid catalyst. The cellulose content of pretreated biomass reached 49.6% w/w. During the enzymatic hydrolysis trials with 3% w/w dry solids, the final hydrolysis yield reached up to 70.1%, which corresponded to the release of 7.8 g/L of glucose. Whereas, the final hydrolysis yield obtained during the high-gravity enzymatic hydrolysis reached up to 43.5%. The concentration of released glucose was in range of 33.3 - 40.0 g/L with a hemicellulose sugars in a range of 5.5 - 6.6 g/L. These values are suitable for downstream bioconversion processes and represent a significant improvement over existing steam pretreatment methods.

Organosolv processing of vine shoots: Fractionation and conversion of hemicellulosic sugars into platform chemicals by microwave irradiation

Vine shoots were subjected to a mild aqueous extraction (to remove water-soluble extractives), and the extracted solids were reacted in catalyzed media (containing water and 1-butanol) to achieve the one-stage solubilization of lignin and hemicelluloses, yielding a cellulose-rich solid. Operating in a microwave-heated reactor under optimized conditions (190 °C in media containing 2% of catalyst and 52% 1-butanol), 67.8% lignin was dissolved, and solids containing 75% cellulose were obtained. Lignin was recovered from the reaction medium and characterized, whereas the hemicellulose-derived products present in the aqueous phase (obtained under conditions leading to maximum concentrations of 17.7 g pentoses/L) were converted into furfural at 64.6% molar yield by acidic processing in the presence of recycled 1-butanol.

A one-step deconstruction-separation organosolv fractionation of lignocellulosic biomass using acetone/phenoxyethanol/water ternary solvent system

A novel ternary solvent system for organosolv fractionation of lignocellulosic biomass, named APW process, which is composed of acetone, phenoxyethanol and water with the advantages of monophasic deconstruction and biphasic separation of components was developed. Through fractionation of amorpha as a case study, a monophasic APW solution (acetone/phenoxyethanol/water = 5:11:4, volume ratio) with the best lignin affinity was constructed based on Hansen solubility parameters. According to Taguchi experimental design, the optimal conditions were 130 °C, 70 min, 0.15 M sulfuric acid and 20 LSR. Under optimal conditions, removal of lignin and hemicellulose reached 95.60% and 98.39%, respectively. While 80.48% of cellulose was retained in residue and its digestibility was 80.36%. Then, 83.74% of hemicellulose was recovered from aqueous as sugars, and 35.64% of lignin was recovered by precipitation. Moreover, APW process also have effective fractionation of sugarcane bagasse, corn cob and pine, cellulose and hemicellulose recovery were both over 80%.

Production of Bio-Based Chemicals, Acetic Acid and Furfural, through Low-Acid Hydrothermal Fractionation of Pine Wood (Pinus densiflora) and Combustion Characteristics of the Residual Solid Fuel

Low-acid hydrothermal (LAH) fractionation conditions were optimized for the effective degradation of hemicellulose from pine wood (Pinus densiflora). The hemicellulosic sugar yield was maximized at 82.5% when the pine wood was fractionated at 190 °C, with 0.5 wt.% of sulfuric acid, and for 10 min. Consecutively, acidified heat treatment with zinc chloride and solvent extraction with ethyl acetate were carried out for the recovery of bio-based platform chemicals, such as furfural and acetic acid, from liquid hydrolysate through liquid–liquid extraction (LLE). Overall, 61.5% of xylose was decomposed into furfural, and the yield of acetic acid was 62.3% and furfural 66.1%. After LAH fractionation, 64.8% of the solid remained and was pelletized. The pellets showed excellent fuel characteristics, i.e., significant ash rejection (74.5%) and high calorific values (4770 kcal/kg), and the precursors of NOx and SOx also decreased by up to 60.0% and 71.4%, respectively.

Mushroom Ligninolytic Enzymes―Features and Application of Potential Enzymes for Conversion of Lignin into Bio-Based Chemicals and Materials

Mushroom ligninolytic enzymes are attractive biocatalysts that can degrade lignin through oxido-reduction. Laccase, lignin peroxidase, manganese peroxidase, and versatile peroxidase are the main enzymes that depolymerize highly complex lignin structures containing aromatic or aliphatic moieties and oxidize the subunits of monolignol associated with oxidizing agents. Among these enzymes, mushroom laccases are secreted glycoproteins, belonging to a polyphenol oxidase family, which have a powerful oxidizing capability that catalyzes the modification of lignin using synthetic or natural mediators by radical mechanisms via lignin bond cleavage. The high redox potential laccase within mediators can catalyze the oxidation of a wide range of substrates and the polymerization of lignin derivatives for value-added chemicals and materials. The chemoenzymatic process using mushroom laccases has been applied effectively for lignin utilization and the degradation of recalcitrant chemicals as an eco-friendly technology. Laccase-mediated grafting has also been employed to modify lignin and other polymers to obtain novel functional groups able to conjugate small and macro-biomolecules. In this review, the biochemical features of mushroom ligninolytic enzymes and their potential applications in catalytic reactions involving lignin and its derivatives to obtain value-added chemicals and novel materials in lignin valorization are discussed.

Effects of Organic Solvents on the Organosolv Pretreatment of Degraded Empty Fruit Bunch for Fractionation and Lignin Removal

Empty fruit bunch (EFB), which is one of the primary agricultural wastes generated from the palm oil plantation, is generally discharged into the open environment or ends up in landfills. The utilization of this EFB waste for other value-added applications such as activated carbon and biofuels remain low, despite extensive research efforts. One of the reasons is that the EFB is highly vulnerable to microbial and fungi degradation under natural environment owning to its inherent characteristic of high organic matter and moisture content. This can rapidly deteriorate its quality and results in poor performance when processed into other products. However, the lignocellulosic components in degraded EFB (DEFB) still largely remain intact. Consequently, it could become a promising feedstock for production of bio-products after suitable pretreatment with organic solvents. In this study, DEFB was subjected to five different types of organic solvents for the pretreatment, including ethanol, ethylene glycol, 2-propanol, acetic acid and acetone. The effects of temperature and residence time were also investigated during the pretreatment. Organosolv pretreatment in ethylene glycol (50 v/v%) with the addition of NaOH (3 v/v%) as an alkaline catalyst successfully detached 81.5 wt.% hemicellulose and 75.1 wt.% lignin. As high as 90.4 wt.% cellulose was also successfully retrieved at mild temperature (80 °C) and short duration (45 min), while the purity of cellulose in treated DEFB was recorded at 84.3%. High-purity lignin was successfully recovered from the pretreatment liquor by using sulfuric acid for precipitation. The amount of recovered lignin from alkaline ethylene glycol liquor was 74.6% at pH 2.0. The high recovery of cellulose and lignin in DEFB by using organosolv pretreatment rendered it as one of the suitable feedstocks to be applied in downstream biorefinery processes. This can be further investigated in more detailed studies in the future.

Advances in Pretreatment of Straw Biomass for Sugar Production

Straw biomass is an inexpensive, sustainable, and abundant renewable feedstock for the production of valuable chemicals and biofuels, which can surmount the main drawbacks such as greenhouse gas emission and environmental pollution, aroused from the consumption of fossil fuels. It is rich in organic content but is not sufficient for extensive applications because of its natural recalcitrance. Therefore, suitable pretreatment is a prerequisite for the efficient production of fermentable sugars by enzymatic hydrolysis. Here, we provide an overview of various pretreatment methods to effectively separate the major components such as hemicellulose, cellulose, and lignin and enhance the accessibility and susceptibility of every single component. This review outlines the diverse approaches (e.g., chemical, physical, biological, and combined treatments) for the excellent conversion of straw biomass to fermentable sugars, summarizes the benefits and drawbacks of each pretreatment method, and proposes some investigation prospects for the future pretreatments.

Investigation of choline chloride-formic acid pretreatment and Tween 80 to enhance sugarcane bagasse enzymatic hydrolysis

In this study, a pretreatment that consisting of choline chloride (ChCl) and formic acid (FA) were performed to improve sugarcane bagasse (SCB) enzymatic hydrolysis. Results showed that the ChCl-FA pretreatment exhibited an extraordinary ability to selectively extract hemicellulose (~95.6%) and degrade a large number of lignin (~72.6%) at 110 °C for 120 min, which enhanced the enzymatic hydrolysis of pretreated SCB. Besides, the impact of various additives on pretreated substrate enzymatic hydrolysis confirmed that Tween 80 was the best enzymatic additive, which could significantly improve the glucose produced from pretreated SCB and remarkably reduce the hydrolysis time (from 72 h to 48 h) and enzyme dosage (from 20 FPU/g pretreated solid to 10 FPU/g pretreated solid). In summary, the coupling of ChCl-FA pretreatment and Tween 80 exhibited a promising way to enhance the sugar release from SCB.

Enzymatic conversion of pretreated lignocellulosic biomass: A review on influence of structural changes of lignin

The demands of energy sustainability drive efforts to bio-chemical conversion of biomass into biofuels through pretreatment, enzymatic hydrolysis, and microbial fermentation. Pretreatment leads to significant structural changes of the complex lignin polymer that affect yield and productivity of the enzymatic conversion of lignocellulosic biomass. Structural changes of lignin after pretreatment include functional groups, inter unit linkages and compositions. These changes influence non-productive adsorption of enzyme on lignin through hydrophobic interaction and electrostatic interaction as well as hydrogen bonding. This paper reviews the relationships between structural changes of lignin and enzymatic hydrolysis of pretreated lignocellulosic biomass. The formation of pseudo-lignin during dilute acid pretreatment is revealed, and their negative effect on enzymatic hydrolysis is discussed.

Delignification of Cistus ladanifer Biomass by Organosolv and Alkali Processes

Residues of Cistus ladanifer obtained after commercial steam distillation for essential oil production were evaluated to produce cellulose enriched solids and added-value lignin-derived compounds. The delignification of extracted (CLRext) and extracted and hydrothermally pretreated biomass (CLRtreat) was studied using two organosolv processes, ethanol/water mixtures (EO), and alkali-catalyzed glycerol (AGO), and by an alkali (sodium hydroxide) process (ASP) under different reaction conditions. The phenolic composition of soluble lignin was determined by capillary zone electrophoresis and by Py-GC/MS, which was also used to establish the monomeric composition of both the delignified solids and isolated lignin. The enzymatic saccharification of the delignified solids was also evaluated. The ASP (4% NaOH, 2 h) lead to both the highest delignification and enzymatic saccharification (87% and 79%, respectively). A delignification of 76% and enzymatic hydrolysis yields of 72% were obtained for AGO (4% NaOH) while EO processes led to lower delignification (maximum lignin removal 29%). The residual lignin in the delignified solids were enriched in G- and H-units, with S-units being preferentially removed. The main phenolics present in the ASP and AGO liquors were vanillic acid and epicatechin, while gallic acid was the main phenolic in the EO liquors. The results showed that C. ladanifer residues can be a biomass source for the production of lignin-derivatives and glucan-rich solids to be further used in bioconversion processes.

Isolation of Low Dispersity Fractions of Acetone Organosolv Lignins to Understand their Reactivity: Towards Aromatic Building Blocks for Polymers Synthesis

Two organosolv lignins extracted during pilot runs of the Fabiola process were analyzed, fractionated and chemically modified with ethylene carbonate (EC) to produce building blocks suitable for polymer synthesis. Isolation of low dispersity fractions relied on the partial solubility of the lignins in organic solvents. Lignins solubility was first evaluated and analyzed with Hansen and Kamlet-Taft solubility parameters, showing a good correlation with the solvents dipolarity/polarizability parameter π*. The results were then used to select a sequence of solvents able to fractionate the lignins into low dispersity fractions of increasing molar masses, which were analyzed by ³¹ P NMR, SEC and DSC. The lignins were then reacted with EC, to convert the phenolic OH groups into primary aliphatic OH groups. The reactivity of the organosolv lignins was high, and milder reaction conditions than previously reported were sufficient to fully convert the phenolic OH groups. A gradual reduction in reactivity with increasing molar mass was evidenced and attributed to reduced solubility of high molar mass fragments in EC. Undesirable crosslinking side reactions were evidenced by SEC, but were efficiently limited thanks to a fine control of the reaction conditions, helping to maximize the benefits of the developed lignin modification with EC.

One-step synthesis of biomass-based sulfonated carbon catalyst by direct carbonization-sulfonation for organosolv delignification

Biomass-based sulfonated carbon catalyst (SCC) was prepared from corncob via direct sulfuric acid carbonization-sulfonation treatment. Central composite design was used to evaluate temperature and time for optimizing SCC yield and sulfonic acid (SO₃H) density. The SO₃H groups were successfully introduced to the SCC as evidenced by FTIR and sulfur analysis. Numerical optimization results showed that 100 °C and 5.78 h are the optimal conditions for maximizing yield (61.24%) and SO₃H density (1.1408 mmol/g). The highest ethanol organosolv lignin (EOL) yield of 63.56% with a substrate yield of 39.08% was achieved at 20% SCC loading in the ethanol organosolv delignification of lignocellulosic biomass. The FTIR spectra of the isolated lignin revealed typical features of G-lignin, indicating that no drastic changes took place in the lignin structure during the process. This study developed a simple one-step preparation method of SCC, which was successfully used as a catalyst in an organosolv delignification of biomass.

Comparison of acid and alkali catalyzed ethylene glycol organosolv pretreatment for sugar production from bagasse

In this study, five acid or alkali catalyzed ethylene glycol (EG) organosolv pretreatments were proposed and compared for sugar production from bagasse. The results showed that compared with single EG/H₂O pretreatment, the EG/H₂O-HCl pretreatment was more efficient for both hemicellulose (~99.3%) and lignin (~67.1%) remove due to the synergistic effect of HCl and EG. The EG/H₂O-NaOH pretreatment was also beneficial for lignin remove (~90.9%), but it was weak for hemicellulose degradation (~28.8%). Both EG/H₂O-HCl and EG/H₂O-NaOH pretreatments have good capacity to reserve the cellulose in pretreated solids. Following enzymatic saccharification, the largest glucose recovery yield from EG/H₂O-HCl pretreatment was 94.3%, a slightly higher than this from EG/H₂O-NaOH pretreatment (92.5%). However, its xylose recovery yield was only 77.3%, significantly lower than that of EG/H₂O-NaOH pretreatment (93.5%). Besides, a certain amount of lignin also can be recovered from above acid or alkali catalyzed organosolv pretreatments through diluting or acidizing the pretreated liquids.

Molecular Insight into the Cosolvent Effect on Lignin-Cellulose Adhesion

Understanding and controlling the physical adsorption of lignin compounds on cellulose pulp are key parameters in the successful optimization of organosolv processes. The effect of binary organic-aqueous solvents on the coordination of lignin to cellulose was studied with molecular dynamics simulations, considering ethanol and acetonitrile to be organic cosolvents in aqueous solutions in comparison to their monocomponent counterparts. The structures of the solvation shells around cellulose and lignin and the energetics of lignin-cellulose adhesion indicate a more effective disruption of lignin-cellulose binding by binary solvents. The synergic effect between solvent components is explained by their preferential interactions with lignin-cellulose complexes. In the presence of pure water, long-lasting H-bonds in the lignin-cellulose complex are observed, promoted by the nonfavorable interactions of lignin with water. Ethanol and acetonitrile compete with water and lignin for cellulose oxygen binding sites, causing a nonlinear decrease in the lignin-cellulose interactions with the amount of the organic component. This effect is modulated by the water exclusion from the cellulose solvation shell by the organic solvent component. The amount and rate of water exclusion depend on the type of organic cosolvent and its concentration.

A novel hybrid organosolv-steam explosion pretreatment and fractionation method delivers solids with superior thermophilic digestibility to methane

Rising environmental concerns and the imminent depletion of fossil resources have sparked a strong interest towards the production of renewable energy such as biomethane. Inclusion of alternative feedstock's such as lignocellulosic biomass could further expand the production of biomethane. The present study evaluated the potential of a novel hybrid organosolv-steam explosion fractionation for delivering highly digestible pretreated solids from birch and spruce woodchips. The highest methane production yield was 176.5 mLCH₄ gVS^-1 for spruce and 327.2 mL CH₄ gVS^-1 for birch. High methane production rates of 1.0-6.3 mL min^-1 (spruce) and 6.0-35.5 mL min^-1 (birch) were obtained, leading to a rapid digestion, with 92% of total methane from spruce being generated in 80 h and 95% of that from birch in 120 h. These results demonstrate the elevated potential of the novel method to fractionate spruce and birch biomass and deliver cellulose-rich pretreated solids with superior digestibility.

Melt Stable Functionalized Organosolv and Kraft Lignin Thermoplastic

A shift towards an economically viable biomass biorefinery concept requires the use of all biomass fractions (cellulose, hemicellulose, and lignin) for the production of high added-value products. As lignin is often underutilized, the establishment of lignin valorization routes is highly important. In-house produced organosolv as well as commercial Kraft lignin were used in this study. The aim of the current work was to make a comparative study of thermoplastic biomaterials from two different types of lignins. Native lignins were alkylate with two different alkyl iodides to produce ether-functionalized lignins. Successful etherification was verified by FT-IR spectroscopy, changes in the molecular weight of lignin, as well as 13C and 1H Nuclear Magnetic Resonance (NMR). The thermal stability of etherified lignin samples was considerably improved with the T2% of organosolv to increase from 143 °C to up to 213 °C and of Kraft lignin from 133 °C to up to 168 °C, and glass transition temperature was observed. The present study shows that etherification of both organosolv and Kraft lignin with alkyl halides can produce lignin thermoplastic biomaterials with low glass transition temperature. The length of the alkyl chain affects thermal stability as well as other thermal properties.

New Intensification Strategies for the Direct Conversion of Real Biomass into Platform and Fine Chemicals: What Are the Main Improvable Key Aspects?

Nowadays, the solvothermal conversion of biomass has reached a good level of development, and now it is necessary to improve the process intensification, in order to boost its further growth on the industrial scale. Otherwise, most of these processes would be limited to the pilot scale or, even worse, to exclusive academic investigations, intended as isolated applications for the development of new catalysts. For this purpose, it is necessary to improve the work-up technologies, combining, where possible, reaction/purification unit operations, and enhancing the feedstock/liquid ratio, thus improving the final concentration of the target product and reducing the work-up costs. Furthermore, it becomes decisive to reconsider more critically the choice of biomass, solvent(s), and catalysts, pursuing the biomass fractionation in its components and promoting one-pot cascade conversion routes. Screening and process optimization activities on a laboratory scale must be fast and functional to the flexibility of these processes, exploiting efficient reaction systems such as microwaves and/or ultrasounds, and using multivariate analysis for an integrated evaluation of the data. These upstream choices, which are mainly of the chemist’s responsibility, are fundamental and deeply interconnected with downstream engineering, economic, and legislative aspects, which are decisive for the real development of the process. In this Editorial, all these key issues will be discussed, in particular those aimed at the intensification of solvothermal processes, taking into account some real case studies, already developed on the industrial scale.

Recovery of High Purity Lignin and Digestible Cellulose from Oil Palm Empty Fruit Bunch Using Low Acid-Catalyzed Organosolv Pretreatment

The lignocellulosic residue from the palm oil industry, oil palm empty fruit bunch (OPEFB), represents a challenge to both producing industries and environment due to its disposal difficulties. Alternatively, OPEFB can be used for the production of valuable products if pretreatment methods, which overcome OPEFB recalcitrance and allow tailored valorization of all its carbohydrates and lignin, are developed. Specifically, high-value applications for lignin, to increase its contribution to the feasibility of lignocellulosic biorefineries, demand high-purity fractions. In this study, acid-catalyzed organosolv using ethanol as a solvent was used for the recovery of high-purity lignin and digestible cellulose. Factors including catalyst type and its concentration, temperature, retention time, and solid-to-liquid (S/L) ratio were found to influence lignin purity and recovery. At the best conditions (0.07% H2SO4, 210 °C, 90 min, and S/L ratio of 1:10), a lignin purity and recovery of 70.6 ± 4.9% and 64.94 ± 1.09%, respectively, were obtained in addition to the glucan-rich fraction. The glucan-rich fraction showed 94.06 ± 4.71% digestibility within 18 h at an enzyme loading of 30 filter paper units (FPU) /g glucan. Therefore, ethanol organosolv can be used for fractionating OPEFB into three high-quality fractions (glucan, lignin, and hemicellulosic compounds) for further tailored biorefining using low acid concentrations. Especially, the use of ethanol opens the possibility for integration of 1st and 2nd generation ethanol benefiting from the separation of high-purity lignin.