Bio-based rhamnolipids production and recovery from waste streams: Status and perspectives

Microbially derived surfactants: an ecofriendly, innovative, and effective approach for managing environmental contaminants

The natural environment is often contaminated with hydrophobic pollutants such as long-chain hydrocarbons, petrochemicals, oil spills, pesticides, and heavy metals. Hydrophobic pollutants with a toxic nature, slow degradation rates, and low solubility pose serious threats to the environment and human health. Decontamination based on conventional chemical surfactants has been found to be toxic, thereby limiting its application in pharmaceutical and cosmetic industries. In contrast, biosurfactants synthesized by various microbial species have been considered superior to chemical counterparts due to their non-toxic and economical nature. Some biosurfactants can withstand a wide range of fluctuations in temperature and pH. Recently, biosurfactants have emerged as innovative biomolecules not only for solubilization but also for the biodegradation of environmental pollutants such as heavy metals, pesticides, petroleum hydrocarbons, and oil spills. Biosurfactants have been well documented to function as emulsifiers, dispersion stabilizers, and wetting agents. The amphiphilic nature of biosurfactants has the potential to enhance the solubility of hydrophobic pollutants such as petroleum hydrocarbons and oil spills by reducing interfacial surface tension after distribution in two immiscible surfaces. However, the remediation of contaminants using biosurfactants is affected considerably by temperature, pH, media composition, stirring rate, and microorganisms selected for biosurfactant production. The present review has briefly discussed the current advancements in microbially synthesized biosurfactants, factors affecting production, and their application in the remediation of environmental contaminants of a hydrophobic nature. In addition, the latest aspect of the circular bioeconomy is discussed in terms of generating biosurfactants from waste and the global economic aspects of biosurfactant production.

Microbial biosurfactants: Green alternatives and sustainable solution for augmenting pesticide remediation and management of organic waste

Pesticide pollution remains a significant environmental challenge, necessitating the exploration of sustainable alternatives. Biosurfactants are a class of unconventional surface-active chemicals that are produced by microorganisms. Biosurfactants have many applications in treating oil spills, emulsifiers, pharmaceuticals, and agriculture. Compared to chemical surfactants, they have benefits such as biodegradability, less toxicity, and a greener option because they are derived from microbes. Biosurfactants have recently been shown to have the potential to speed up pesticide cleanup. Biosurfactants are used in pesticide remediation because of their exceptional foaming ability, high selectivity, and wide range of pH, salinity, and temperature operating windows. Microbial biosurfactants emerged as potential agents for the treatment of organic waste and agricultural residue. This review unfolds the promising realm of microbial biosurfactants as green solutions for environmental sustainability, particularly in agricultural practices, with special reference to pesticide remediation. This article highlights the escalating need for eco-friendly alternatives, paving the way for discussing biosurfactants. Moreover, the articles discuss in detail various advancements in the field of rapid screening of biosurfactants, either using a conventional approach or via advanced instruments such as GC-MS, HPLC, NMR, FTIR, etc. Furthermore, the article unveils the molecular mechanisms and the microbial genes driving biosurfactant synthesis, offering insights into enhancing production efficiency. Moreover, the article explores diverse applications of microbial biosurfactants in sustainable agriculture, ranging from soil remediation to crop protection. The article also highlights the various functions of microbial biosurfactants for enhancing the decomposition and recycling of organic waste and agricultural residues, emphasizing their potential for sustainable waste management strategies. Overall, the review underscores the pivotal role of microbial biosurfactants as green alternatives for addressing pesticide pollution and advancing environmental sustainability.

Valorization of waste engine oil to mono- and di-rhamnolipid in a sustainable approach to circular bioeconomy

This study aims to valorize waste engine oil (WEO) for synthesizing economically viable biosurfactants (rhamnolipids) to strengthen the circular bioeconomy concept. It specifically focuses on investigating the influence of key bioprocess parameters, viz. agitation and aeration rates, on enhancing rhamnolipid yield in a fed-batch fermentation mode. The methodology involves conducting experiments in a stirred tank bioreactor (3 L) using Pseudomonas aeruginosa gi |KP 163922| as the test organism. Central composite design and response surface methodology (CCD-RSM) are employed to design the experiments and analyze the effects of agitation and aeration rates on various parameters, including dry cell biomass (DCBM), surface tension, tensoactivity, and rhamnolipid yield. It is also essential to determine the mechanistic pathway of biosurfactant production followed by the strain using complex hydrophobic substrates such as WEO. The study reveals that optimal agitation and aeration rates of 200 rpm and 1 Lpm result in the highest biosurfactant yield of 29.76 g/L with minimal surface tension (28 mN/m). Biosurfactant characterization using FTIR, 1H NMR, and UPLC-MS/MS confirm the presence of dominant molecular ion peaks m/z 543.9 and 675.1. This suggests that the biosurfactant is a mixture of mono- and di-rhamnolipids (RhaC10C10, RhaRhaC10C12:1, RhaRhaC12:1C10). The findings present a sustainable approach for biosurfactant production in a fed-batch bioreactor. This research opens the possibility of exploring the use of pilot or large-scale bioreactors for biosurfactant production in future investigations.

Pseudomonas putida as a platform for medium-chain length α,ω-diol production: Opportunities and challenges

Medium-chain-length α,ω-diols (mcl-diols) play an important role in polymer production, traditionally depending on energy-intensive chemical processes. Microbial cell factories offer an alternative, but conventional strains like Escherichia coli and Saccharomyces cerevisiae face challenges in mcl-diol production due to the toxicity of intermediates such as alcohols and acids. Metabolic engineering and synthetic biology enable the engineering of non-model strains for such purposes with P. putida emerging as a promising microbial platform. This study reviews the advancement in diol production using P. putida and proposes a four-module approach for the sustainable production of diols. Despite progress, challenges persist, and this study discusses current obstacles and future opportunities for leveraging P. putida as a microbial cell factory for mcl-diol production. Furthermore, this study highlights the potential of using P. putida as an efficient chassis for diol synthesis.

Rhamnolipids: A biosurfactant for the development of lipid-based nanosystems for food applications

Biosurfactants (surfactants synthesized by microorganisms) are produced by microorganisms and are suitable for use in different areas. Among biosurfactants, rhamnolipids are the most studied and popular, attracting scientists, and industries' interest. Due to their unique characteristics, the rhamnolipids have been used as synthetic surfactants' alternatives and explored in food applications. Besides the production challenges that need to be tackled to guarantee efficient production and low cost, their properties need to be adjusted to the final application, where the pH instability needs to be considered. Moreover, regulatory approval is needed to start being used in commercial applications. One characteristic of interest is their capacity to form oil-in-water nanosystems. Some of the most explored have been nanoemulsions, solid-lipid nanoparticles and nanostructured lipid carriers. This review presents an overview of the main properties of rhamnolipids, asserts the potential and efficiency of rhamnolipids to replace the synthetic surfactants in the development of nanosystems, and describes the rhamnolipids-based nanosystems used in food applications. It also discusses the main characteristics and methodologies used for their characterization and in the end, some of the main challenges are highlighted.

Enhancing rhamnolipid production through a two-stage fermentation control strategy based on metabolic engineering and nitrate feeding

Nitrate plays a crucial role in the high-efficient fermentation production of rhamnolipids (RLs). However, the underlying mechanism remains unclear. Firstly, by knocking out the restriction endonuclease PaeKI and utilizatiing the endogenous CRISPR-Cas-mediated single-plasmid recombineering system, a genome editing system for P. aeruginosa KT1115 has been established. Secondly, an engineered strain KT1115ΔpaeKIΔnirS was obtained with a 87% of reduction in nitric oxide (NO) accumulation and a 93% of reduction in RLs production, revealing the crucial role of NO signaling molecule produced from nitrate metabolism in RLs production. Finally, by combining metabolic engineering of the nitrate metabolism pathway with nitrogen feeding, a new two-stage fermentation process was developed. The fermentation production period was reduced from 168 h to 120 h while achieving a high yield of 0.8 g/g, and the average productivity increased by 55%. In all, this study provides a novel insights in the RLs biosynthesis and fermentation control strategy.

Simultaneous methanogenesis and denitrification in an anaerobic moving bed biofilm reactor for landfill leachate treatment: Ameliorative effect of rhamnolipids

In this study, an anaerobic moving bed biofilm reactor (AnMBBR) was developed for simultaneous methanogenesis and denitrification (SMD) to treat high-strength landfill leachate for the first time. A novel strategy using biosurfactant to ameliorate the inhibition of landfill leachate on the SMD performance was proposed and the underlying mechanisms were explored comprehensively. With the help of rhamnolipids, the chemical oxygen demand (COD) removal efficiency of landfill leachate was improved from 86.0% ± 2.9% to 97.5% ± 1.6%, while methane yields increased from 50.1 mL/g-COD to 69.6 mL/g-COD, and the removal efficiency of NO3--N was also slightly increased from 92.5% ± 1.9% to 95.6% ± 1.0%. The addition of rhamnolipids increased the number of live cells and enhanced the secretion of extracellular polymeric substances (EPS) and key enzyme activity, indicating that the inhibitory effect was significantly ameliorated. Methanogenic and denitrifying bacteria were enhanced by 1.6 and 1.1 times, respectively. Analysis of the microbial metabolic pathways demonstrated that landfill leachate inhibited the expression of genes involved in methanogenesis and denitrification, and that their relative abundance could be upregulated with the assistance of rhamnolipids addition. Moreover, extended Deraguin - Landau - Verwery - Oxerbeek (XDLVO) theory analysis indicated that rhamnolipids reduced the repulsive interaction between biofilms and pollutants with a 57.0% decrease in the energy barrier, and thus accelerated the adsorption and uptake of pollutants onto biofilm biomass. This finding provides a low-carbon biological treatment protocol for landfill leachate and a reliable and effective strategy for its sustainable application.

Basic principles for biosurfactant-assisted (bio)remediation of soils contaminated by heavy metals and petroleum hydrocarbons - A critical evaluation of the performance of rhamnolipids

Despite the fact that rhamnolipids are among the most studied biosurfactants, there are still several gaps which must be filled. The aim of this review is to emphasize and to indicate which issues should be taken into account in order to achieve efficient rhamnolipids-assisted biodegradation or phytoextraction of soils contaminated by heavy metals and petroleum hydrocarbons without harmful side effects. Four main topics have been elucidated in the review: effective concentration of rhamnolipids in soil, their potential phytotoxicity, susceptibility to biodegradation and interaction with soil microorganisms. The discussed elements are often closely associated and often overlap, thus making the interpretation of research results all the more challenging. Each dedicated section of this review includes a description of potential issues and questions, an explanation of the background and rationale for each problem, analysis of relevant literature reports and a short summary with possible application guidelines. The main conclusion is that there is a necessity to establish regulations regarding effective concentrations for rhamnolipids-assisted remediation of soil. The use of an improper concentration is the direct cause of all the other discussed phenomena.

Cassava wastewater valorization for the production of biosurfactants: surfactin, rhamnolipids, and mannosileritritol lipids

The global production of cassava was estimated at ca. 303 million tons. Due to this high production, the cassava processing industry (cassava flour and starch) generates approximately ca. 0.65 kg of solid residue and ca. 25.3 l of wastewater per kg of fresh processed cassava root. The composition of the liquid effluent varies according to its origin; for example, the effluent from cassava flour production, when compared to the wastewater from the starch processing, presents a higher organic load (ca. 12 times) and total cyanide (ca. 29 times). It is worthy to highlight the toxicity of cassava residues regarding cyanide presence, which could generate disorders with acute or chronic symptoms in humans and animals. In this sense, the development of simple and low-cost eco-friendly methods for the proper treatment or reuse of cassava wastewater is a challenging, but promising path. Cassava wastewater is rich in macro-nutrients (proteins, starch, sugars) and micro-nutrients (iron, magnesium), enabling its use as a low-cost culture medium for biotechnological processes, such as the production of biosurfactants. These compounds are amphipathic molecules synthesized by living cells and can be widely used in industries as pharmaceutical agents, for microbial-enhanced oil recovery, among others. Amongst these biosurfactants, surfactin, rhamnolipids, and mannosileritritol lipids show remarkable properties such as antimicrobial, biodegradability, demulsifying and emulsifying capacity. However, the high production cost restricts the massive biosurfactant applications. Therefore, this study aims to present the state of the art and challenges in the production of biosurfactants using cassava wastewater as an alternative culture medium.

The Influence of Hydrodynamic Conditions in a Laboratory-Scale Bioreactor on Pseudomonas aeruginosa Metabolite Production

Hydrodynamic conditions are critical in bioprocessing because they influence oxygen availability for cultured cells. Processes in typical laboratory bioreactors need optimization of these conditions using mixing and aeration control to obtain high production of the desired bioproduct. It could be done by experiments supported by computational fluid dynamics (CFD) modeling. In this work, we characterized parameters such as mixing time, power consumption and mass transfer in a 2 L bioreactor. Based on the obtained results, we chose a set of nine process parameters to test the hydrodynamic impact on a selected bioprocess (mixing in the range of 0-160 rpm and aeration in the range of 0-250 ccm). Therefore, we conducted experiments with P. aeruginosa culture and assessed how various hydrodynamic conditions influenced biomass, pyocyanin and rhamnolipid production. We found that a relatively high mass transfer of oxygen (k_La = 0.0013 s^-1) connected with intensive mixing (160 rpm) leads to the highest output of pyocyanin production. In contrast, rhamnolipid production reached maximal efficiency under moderate oxygen mass transfer (k_La = 0.0005 s^-1) and less intense mixing (in the range of 0-60 rpm). The results indicate that manipulating hydrodynamics inside the bioreactor allows control of the process and may lead to a change in the metabolites produced by bacterial cells.

Utilization of surface-active compounds derived from biosolids to remediate polycyclic aromatic hydrocarbons contaminated sediment soil

In the present study, surface-active compounds (SAC) were extracted from biosolids using an alkaline treatment process. They were tested for their remediation efficiency of crude oil-contaminated sediment soil and was compared with Triton x-100. The SAC exhibited a similar soil washing efficiency to that of the commercial Triton x-100, and under the optimized soil washing parameters, SAC exhibited a maximum of 91% total polycyclic aromatic hydrocarbons removal. Further, on analysing the toxicity of the soil residue after washing, it was observed that SAC from biosolids washed soil exhibited an average of 1.5-fold lesser toxicity compared to that of Triton x-100 on different test models-earthworm, a monocot, and dicot plants. The analysis of the key soil parameters revealed that the commercial surfactant reduced the soil organic matter and porosity by an average of 1.3-fold compared to SAC. Further, the ability of surfactants to induce toxicity was confirmed by the adsorption of the surfactants on the surface of the soil particles which was in the order of Triton x-100 > SAC. Thus, this study suggests that SAC can be applied as an effective bioremediation approach for contaminated soil for a greener and sustainable ecosystem.

Integration of green economy concepts for sustainable biosurfactant production - A review

The link between increasing global population, food demand, industrialization, and agricultural waste is strong. Decomposing by-products from food cycles can introduce harmful toxic heavy metals, active degrading microbes, and enzymes to the environment. Additionally, high greenhouse gas emissions from the decomposing wastes contribute to global change and a high carbon economy. The bioeconomy and circular economy of biosurfactant production utilize these cheap feedstocks and promote waste to valuable product initiatives. Waste reduction, reuse, and recycling in an integrating green economy bioprocess ensure the sustainability of novel, cost-effective, safe, and renewable health-grade biosurfactants. This work reviews green economy concepts integration with sustainable biosurfactant production and its application in health-related industries. Benefits from recent advances in the production, characterization, and health-wise classification of biosurfactants were further discussed, including its limitations, techno-economic assessment, market evaluations, possible roadblocks, and future directions.

Cost-effective rhamnolipid production by Burkholderia thailandensis E264 using agro-industrial residues

The agro-industrial by-products corn steep liquor (CSL) and olive mill wastewater (OMW) were evaluated as low-cost substrates for rhamnolipid production by Burkholderia thailandensis E264. In a culture medium containing CSL (7.5% (v/v)) as sole substrate, B. thailandensis E264 produced 175 mg rhamnolipid/L, which is about 1.3 times the amount produced in the standard medium, which contains glycerol, peptone, and meat extract. When the CSL medium was supplemented with OMW (10% (v/v)), rhamnolipid production further increased up to 253 mg/L in flasks and 269 mg/L in a bioreactor. Rhamnolipids produced in CSL + OMW medium reduced the surface tension up to 27.1 mN/m, with a critical micelle concentration of 51 mg/L, better than the values obtained with the standard medium (28.9 mN/m and 58 mg/L, respectively). However, rhamnolipids produced in CSL + OMW medium displayed a weak emulsifying activity when compared to those produced in the other media. Whereas di-rhamnolipid congeners represented between 90 and 95% of rhamnolipids produced by B. thailandensis E264 in CSL and the standard medium, the relative abundance of mono-rhamnolipids increased up to 55% in the culture medium containing OMW. The difference in the rhamnolipid congeners produced in each medium explains their different surface-active properties. To the best of our knowledge, this is the first report of rhamnolipid production by B. thailandensis using a culture medium containing agro-industrial by-products as sole ingredients. Furthermore, rhamnolipids produced in the different media recovered around 60% of crude oil from contaminated sand, demonstrating its potential application in the petroleum industry and bioremediation. KEY POINTS: • B. thailandensis produced RL using agro-industrial by-products as sole substrates • Purified RL displayed excellent surface activity (minimum surface tension 27mN/m) • Crude RL (cell-free supernatant) recovered 60% of crude oil from contaminated sand.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Bioreactor-scale production of rhamnolipids from food waste digestate and its recirculation into anaerobic digestion for enhanced process performance: Creating closed-loop integrated biorefinery framework

Reaching industrially relevant productivities in bioprocesses and their efficient integration in the existing industrial infrastructure remain as important challenges in the circular economy to create closed loop sustainability framework. Using anaerobic digestion (AD) biorefinery as a model, the present work addressed these problems via integration of next-generation rhamnolipids production with AD. A high rhamnolipids concentration of 10.25 ± 1.34 g/L was obtained by fed-batch fermentation using food waste digestate as medium. Digestate-derived rhamnolipids contained Rha-C₁₀-C₁₀ and Rha-Rha-C₁₀-C₁₀ as the predominant congeners. These were used back in single-phase AD to demonstrate their effect on sludge solubilization and digestion efficiency. A dosage of 0.02 g rhamnolipids/g total suspended solids was found to be optimal which enhanced the hydrolysis-acidogenesis reactions to up to 27% over control. It however retarded methane production which could be overcome by the prolongation of digestion time. Finally, the value chain appreciation by the proposed process was demonstrated by a feasibility analysis.

Sustainable strategies for combating hydrocarbon pollution: Special emphasis on mobil oil bioremediation

The global rise in industrialization and vehicularization has led to the increasing trend in the use of different crude oil types. Among these mobil oil has major application in automobiles and different machines. The combustion of mobil oil renders a non-usable form that ultimately enters the environment thereby causing problems to environmental health. The aliphatic and aromatic hydrocarbon fraction of mobil oil has serious human and environmental health hazards. These components upon interaction with soil affect its fertility and microbial diversity. The recent advancement in the omics approach viz. metagenomics, metatranscriptomics and metaproteomics has led to increased efficiency for the use of microbial based remediation strategy. Additionally, the use of biosurfactants further aids in increasing the bioavailability and thus biodegradation of crude oil constituents. The combination of more than one approach could serve as an effective tool for efficient reduction of oil contamination from diverse ecosystems. To the best of our knowledge only a few publications on mobil oil have been published in the last decade. This systematic review could be extremely useful in designing a micro-bioremediation strategy for aquatic and terrestrial ecosystems contaminated with mobil oil or petroleum hydrocarbons that is both efficient and feasible. The state-of-art information and future research directions have been discussed to address the issue efficiently.

Bacillus licheniformis: The unexplored alternative for the anaerobic production of lipopeptide biosurfactants?

Microbial biosurfactants have attracted the attention of researchers and companies for the last decades, as they are considered promising candidates to replace chemical surfactants in numerous applications. Although in the last years, considerable advances were performed regarding strain engineering and the use of low-cost substrates in order to reduce their production costs, one of the main bottlenecks is their production at industrial scale. Conventional aerobic biosurfactant production processes result in excessive foaming, due to the use of high agitation and aeration rates necessary to increase dissolved oxygen concentration to allow microbial growth and biosurfactant production. Different approaches have been studied to overcome this problem, although with limited success. A not widely explored alternative is the development of foam-free processes through the anaerobic growth of biosurfactant-producing microorganisms. Surfactin, produced by Bacillus subtilis, is the most widely studied lipopeptide biosurfactant, and the most powerful biosurfactant known so far. Bacillus licheniformis strains produce lichenysin, a lipopeptide biosurfactant which structure is similar to surfactin. However, despite its extraordinary surface-active properties and potential applications, lichenysin has been scarcely studied. According to previous studies, B. licheniformis is better adapted to anaerobic growth than B. subtilis, and could be a good alternative for the anaerobic production of lipopeptide biosurfactants. In this review, the potential and limitations of surfactin and lichenysin production under anaerobic conditions will be analyzed, and the possibility of implementing foam-free processes for lichenysin production, in order to expand the market and applications of biosurfactants in different fields, will be discussed.

Valorization of citrus peel waste for the sustainable production of value-added products

Globally the generation and mismanagement of waste from fruit processing and post-harvest impose a severe burden on waste management strategies along with environmental pollution, health hazards. Citrus waste is one of such worrying fruit waste, which is rich in several value-added chemicals, including pectin. Pectin is a prebiotic polysaccharide possessing a multitude of health benefits. Citrus pectin has excellent gelling, thickening, water holding capacity, and encapsulating properties, which pave its functionality in versatile industrial fields including food processing and preservation, drug and therapeutic agents, cosmetics, and personal care products. The utilization of citrus wastes to derive valuable bioproducts can offer an effective approach towards sustainable waste management. With the ever-increasing demand, several strategies have been devised to increase the efficiency of pectin recovery from citrus waste. This review article discusses the sources, effect, and technology-mediated valorization of citrus waste, the functional and nutritive application of pectin along with its socio-economic and environmental perspective.

Optimization of conditions for a surfactant-producing strain and application to petroleum hydrocarbon-contaminated soil bioremediation

Petroleum hydrocarbon-contaminated sites have been mainly remediated through the surfactant-enhanced soil leaching method. However, the commonly used chemical surfactants have poor biocompatibility and are prone to form residues in fields. Therefore, the purpose of this research is to establish an effective system of biosurfactant remediation in the field and provide instructions for common bioremediation challenges. First, wild-type Bacillus amyloliquefaciens A3, which produced lipopeptide biosurfactant, was used to improve the production of biosurfactant by atmosphere and room temperature plasma (ARTP) mutagenesis. Second, the mutant 1-24 was selected from a total of 174 mutants due to the outstanding yield. Subsequently, 1-24 was applied in the soil column leaching experiments and removed 45.44% of petroleum hydrocarbons by changing the relevant enzyme activities. Biosurfactant addition and 1-24 inoculation effectively activated a portion of the petroleum hydrocarbons in the soil columns, and 1-24 presented potential as a desired candidate for bioremediation. This is the first report of using ARTP mutagenesis to improve the production of biosurfactants. Simultaneously, we first propose a theoretical system in which the yield of biosurfactant was increased using ARTP mutagenesis for strains and applied the mutants in situ soil bioremediation. This research indicated that the theoretical system was useful in soil columns to simulate field remediation conditions, providing practical references for the bioremediation of contaminated soil.

Rhamnolipids as Green Stabilizers of nZVI and Application in the Removal of Nitrate From Simulated Groundwater

Environmental contamination caused by inorganic compounds is a major problem affecting soils and surface water. Most remediation techniques are costly and generally lead to incomplete removal and production of secondary waste. Nanotechnology, in this scenario with the zero-valent iron nanoparticle, represents a new generation of environmental remediation technologies. It is non-toxic, abundant, cheap, easy to produce, and its production process is simple. However, in order to decrease the aggregation tendency, the zero-iron nanoparticle is frequently coated with chemical surfactants synthesized from petrochemical sources, which are persistent or partially biodegradable. Biosurfactants (rhamnolipids), extracellular compounds produced by microorganisms from hydrophilic and hydrophobic substrates can replace synthetic surfactants. This study investigated the efficiency of a rhamnolipid biosurfactant on the aggregation of nanoscale zer-valent iron (nZVI) and its efficiency in reducing nitrate in simulated groundwater at pH 4.0. Two methods were tested: 1) adding the rhamnolipid during chemical synthesis and 2) adding the rhamnolipid after chemical synthesis of nZVI. Scanning electron microscopy field emission, X-ray diffractometry, Fourier transform infrared spectroscopy, thermogravimetric analysis, Dynamic Light Scattering, and zeta potential measurements were used to characterize bare nZVI and rhamnolipid-coated nZVI. The effects of the type of nZVI and initial NO3 concentration were examined. Nanoscale zer-valent iron with the addition of the rhamnolipid after synthesis achieved the best removal rate of nitrate (about 78%), with an initial nitrate concentration of 25 mg L−1. The results suggest that nZVI functionalized with rhamnolipids is a promising strategy for the in situ remediations of groundwater contaminated by NO3, heavy metal, and inorganic carbon.

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Majority of industries, in order to meet the technological development and consumer demands generate waste. The untreated waste spreads out toxic and harmful substances in the environment which serves as a breeding ground for pathogenic microorganisms thus causing severe health hazards. The three industrial sectors namely food, agriculture, and oil industry are among the primary organic waste producers that affect urban health and economic growth. Conventional treatment generates a significant amount of greenhouse gases which further contributes to global warming. Thus, the use of microbes for utilization of this waste, liberating CO₂ offers an indispensable tool. The simultaneous production of value-added products such as bioplastics, biofuels, and biosurfactants increases the economics of the process and contributes to environmental sustainability. This review comprehensively summarized the composition of organic waste generated from the food, agriculture, and oil industry. The linkages between global health hazards of industrial waste and environmental implications have been uncovered. Stare-of-the-art information on their subsequent utilization as a substrate to produce value-added products through bio-routes has been elaborated. The research gaps, economical perspective(s), and future research directions have been identified and discussed to strengthen environmental sustainability.

Conversion of Waste Cooking Oil to Rhamnolipid by a Newly Oleophylic Pseudomonas aeruginosa WO2

The components of waste cooking oil (WCO) are complex and contain toxic substances, which are difficult to treat biologically. Pseudomonas aeruginosa WO2 was isolated from oily sludge by an anaerobic enrichment–aerobic screening method, which could efficiently utilize WCO and produce rhamnolipid. The effects of nutrients and culture conditions on bacterial growth and lipase activity were investigated to optimize the fermentation of WCO. The results showed that strain WO2 utilized 92.25% of WCO and produced 3.03 g/L of rhamnolipid at 120 h. Compared with inorganic sources, the organic nitrogen source stabilized the pH of fermentation medium, improved lipase activity (up to 19.98 U/mL), and promoted the utilization of WCO. Furthermore, the WO2 strain exhibited inferior utilization ability of the soluble starch contained in food waste, but superior salt stress up to 60 g/L. These unique characteristics demonstrate the potential of Pseudomonas aeruginosa WO2 for the utilization of high-salinity oily organic waste or wastewater.

Revealing the mechanisms of rhamnolipid enhanced hydrogen production from dark fermentation of waste activated sludge

Rhamnolipid (RL), as an environmentally compatible biosurfactant, has been used to enhance waste activated sludge (WAS) fermentation. However, the effect of RL on hydrogen accumulation in anaerobic fermentation remains unclear. Therefore, this work targets to investigate the mechanism of RL-based dark fermentation system on hydrogen production of WAS. It was found that the maximum yield of hydrogen increased from 1.76 ± 0.26 to 11.01 ± 0.30 mL/g VSS (volatile suspended solids), when RL concentration increased from 0 to 0.10 g/g TSS (total suspended solids). Further enhancement of RL level to 0.12 g/g TSS slightly reduced the production to 10.80 ± 0.28 mL/g VSS. Experimental findings revealed that although RL could be degraded to generate hydrogen, it did not play a major role in enhancing hydrogen accumulation. Mechanism analysis suggested that RL decreased the surface tension between sludge liquid and hydrophobic compounds, thus accelerating the solubilization of WAS, improving the proportion of biodegradable substances which could be used for subsequent hydrogen production. Regardless of the fact that adding RL suppressed all the fermentation processes, the inhibition effect of processes associated with hydrogen consumption was much severer than that of hydrogen production. Further investigations of microbial community revealed that RL enriched the relative abundance of hydrogen producers e.g., Romboutsia but reduced that of hydrogen consumers like Desulfobulbus and Caldisericum.

Valorization of dairy waste and by-products through microbial bioprocesses

Waste is an inherent and unavoidable part of any process which can be attributed to various factors such as process inefficiencies, usability of resources and discarding of not so useful parts of the feedstock. Dairy is a burgeoning industry following the global population growth, resulting in generation of waste such as wastewater (from cleaning, processing, and maintenance), whey and sludge. These components are rich in nutrients, organic and inorganic materials. Additionally, the presence of alkaline and acidic detergents along with sterilizing agents in dairy waste makes it an environmental hazard. Thus, sustainable valorization of dairy waste requires utilization of biological methods such as microbial treatment. This review brings forward the current developments in utilization and valorization of dairy waste through microbes. Aerobic and anaerobic treatment of dairy waste using microbes can be a sustainable and green method to generate biofertilizers, biofuels, power, and other biobased products.

Production of biosurfactants from agro-industrial waste and waste cooking oil in a circular bioeconomy: An overview

Waste generation is becoming a global concern owing to its adverse effects on environment and human health. The utilization of waste as a feedstock for production of value-added products has opened new avenues contributing to environmental sustainability. Microorganisms have been employed for production of biosurfactants as secondary metabolites by utilizing waste streams. Utilization of waste as a substrate significantly reduces the cost of overall process. Biosurfactant(s) derived from these processes can be utilized in environmental and different industrial sectors. This review focuses on global market of biosurfactants followed by discussion on production of biosurfactants from waste streams such as agro-industrial waste and waste cooking oil. The need for waste stream derived circular bioeconomy and scale up of biosurfactant production have been narrated with applications of biosurfactants in environment and industrial sectors. Road blocks and future directions for research have also been discussed.

Tapping the Role of Microbial Biosurfactants in Pesticide Remediation: An Eco-Friendly Approach for Environmental Sustainability

Pesticides are used indiscriminately all over the world to protect crops from pests and pathogens. If they are used in excess, they contaminate the soil and water bodies and negatively affect human health and the environment. However, bioremediation is the most viable option to deal with these pollutants, but it has certain limitations. Therefore, harnessing the role of microbial biosurfactants in pesticide remediation is a promising approach. Biosurfactants are the amphiphilic compounds that can help to increase the bioavailability of pesticides, and speeds up the bioremediation process. Biosurfactants lower the surface area and interfacial tension of immiscible fluids and boost the solubility and sorption of hydrophobic pesticide contaminants. They have the property of biodegradability, low toxicity, high selectivity, and broad action spectrum under extreme pH, temperature, and salinity conditions, as well as a low critical micelle concentration (CMC). All these factors can augment the process of pesticide remediation. Application of metagenomic and in-silico tools would help by rapidly characterizing pesticide degrading microorganisms at a taxonomic and functional level. A comprehensive review of the literature shows that the role of biosurfactants in the biological remediation of pesticides has received limited attention. Therefore, this article is intended to provide a detailed overview of the role of various biosurfactants in improving pesticide remediation as well as different methods used for the detection of microbial biosurfactants. Additionally, this article covers the role of advanced metagenomics tools in characterizing the biosurfactant producing pesticide degrading microbes from different environments.

Membrane Distillation of Saline Water Contaminated with Oil and Surfactants

Application of the membrane distillation (MD) process for the treatment of high-salinity solutions contaminated with oil and surfactants represents an interesting area of research. Therefore, the aim of this study is to investigate the effect of low-concentration surfactants in oil-contaminated high-salinity solutions on the MD process efficiency. For this purpose, hydrophobic capillary polypropylene (PP) membranes were tested during the long-term MD studies. Baltic Sea water and concentrated NaCl solutions were used as a feed. The feed water was contaminated with oil collected from bilge water and sodium dodecyl sulphate (SDS). It has been demonstrated that PP membranes were non-wetted during the separation of pure NaCl solutions over 960 h of the module exploitation. The presence of oil (100–150 mg/L) in concentrated NaCl solutions caused the adsorption of oil on the membranes surface and a decrease in the permeate flux of 30%. In turn, the presence of SDS (1.5–2.5 mg/L) in the oil-contaminated high-salinity solutions slightly accelerated the phenomenon of membrane wetting. The partial pores’ wetting accelerated the internal scaling and affected degradation of the membrane’s structure. Undoubtedly, the results obtained in the present study may have important implications for understanding the effect of low-concentration SDS on MD process efficiency.

PSU-g-SBMA hollow fiber membrane for treatment of oily wastewater

Ultrafiltration membranes can intercept oil particles smaller than 10 μm, but the membranes are easily contaminated by oil due to their hydrophobicity. To treat various oily wastewaters, we prepared a hydrophilic hollow fiber membrane (HFM) with anti-fouling property by grafting sulfobetaine methacrylate (SBMA) onto polysulfone (PSU). For six simulated wastewaters containing emulsified oil at 1,000 mg/L, the PSU-g-SBMA HFM was able to remove 98.5-99.7% of oil, higher than that of PSU HFM at 91.1-98.9%. The oil concentration in filtrate was less than 15 mg/L, which could meet the discharge standard of wastewater. The water flux of PSU-g-SBMA HFM can be completely recovered after being washed by rhamnolipid and alkali solution, while the same cleaning process could not recover the PSU HFM. As found, the contact angles of oil droplets on the PSU-g-SBMA membrane were larger than those on PSU membrane, which indicated the improved hydrophilicity by PSU-g-SBMA. For 48 h of filtration to soybean and diesel oil/water emulsion, the effect of PSU-g-SBMA HFM was stable and the flux could be completely recovered by cleaning. Therefore, we provided a new method for oily wastewater treatment, which can efficiently and energy-saving remove various oil substances in wastewater.

Lipolytic Nocardiopsis for reduction of pollution load in textile industry effluent and SWISS model for structural study of lipase

The aim of this work was to study the reduction of pollution load in the textile industry effluent by lipase producing Nocardiopsis alba. Nocardiopsis alba was isolated from the soap-stock of an oil refinery located in North Gujarat, India. Lipase 2 (EC 3.1.1.3) protein sequence was identified from Nocardiopsis alba and the 3D model was predicted by SWISS Modeling. Lipolytic Nocardiopsis alba showed 84 ± 0.3 %, 75 ± 0.4 %, and 81 ± 0.3 % reduction of Chemical Oxygen Demand, Biochemical Oxygen Demand and Total Solids, respectively when was grown in textile industrial wastewater at 37 ± 1 °C, 120 rpm for 15 days. The findings of this research offer potential environmental benefits along with socio-economic benefits as well if implemented suitably.

Surface Properties and Liquid Crystal Properties of Alkyltetra(oxyethyl) β-d-Glucopyranoside

Hydrophilic alkyl polyglycosides (APGs) and alkyl glycosides (AGs) with anomeric pure are a class of important substitutes for petroleum-based surfactants. Improving their water solubility should make such hydrophilic glycosurfactants have more excellent potential application value. To solve the inherent problem of poor water solubility of traditional alkyl β-d-glucopyranoside (5), a series of alkyltetra(oxyethyl) β-d-glucopyranosides (4a-4g, n = 7-18) were successfully synthesized by introducing tetra(oxyethylene) fragments to carry out the structural modification. The relationship between the related structure and the physicochemical properties was further investigated, including their hydrophilic-lipophilic balance (HLB), water-solubility, foaming performance, emulsification, hygroscopicity, surface activity, and thermotropic/lyotropic liquid crystal phase behavior. The results showed that the water solubility gradually decreased as the alkyl chain length increased due to the gradual decrease of their HLB number. Octadecyltetra(oxyethyl) β-d-glucopyranoside (4g, n = 18) was found to be insoluble in water at 25 °C. Taken together, long-chain alkyl glycosides had good foaming properties and excellent emulsifying properties. Among them, dodecyltetra(oxyethyl) β-d-glucopyranoside (4d, n = 12) had the best foaming performance. In the rapeseed oil/water system, cetyltetra(oxyethyl) β-d-glucopyranoside (4f, n = 16) had the best emulsifying ability. With the increase of the alkyl chain length, the critical micelle concentration (C_cmc), γ_cmc, Γ_max, and hygroscopicity of this series of glycosides showed a downward trend. Differential scanning calorimetry (DSC) and polarizing optical microscopy (POM) showed that the thermal stability increased with the increase of the alkyl chain length, and alkyltetra(oxyethyl) β-d-glucopyranosides (4d-4g, n = 12-18) had the corresponding melting points and clearing points. Alkyltetra(oxyethyl) β-d-glucopyranosides (4b-4g, n = 8-18) formed a smectic phase with a typical fan-shaped and focal conic texture during the cooling process. In the water contact experiments, it was found that glycosides (4b-4g, n = 8-18) at high concentrations transformed into various lyotropic liquid crystal including hexagonal phase, bicontinuous cubic phase, and lamellar phase phases. Therefore, such green nonionic glycosurfactants alkyltetra(oxyethyl) β-d-glucopyranosides should have potential practical application prospects.

Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils

Heavy metal toxicity has become a pressing ecological problem that affects the ecosystems through bioaccumulation, representing a serious public health hazard. Many conventional strategies have been developed and applied to decontaminate and restore metal-contaminated areas. However, these conventional approaches are not very suitable and environmentally safe for heavy metal remediation because of their high operational costs, high energy requirements, post-waste disposal problems, and secondary pollutant generation. Thus, biosurfactant-based bioremediation of heavy metals is a sustainable and promising approach because of its biodegradation capability, economic effectiveness, and ecofriendly nature. Pseudomonas sp., Bacillus sp., Citrobacter freundii, and Candida tropicalis have been isolated as potential sources of biosurfactants and produce compounds such as surfactin, rhamnolipids, and sophorolipids. Owing to the severity of heavy metal pollution in certain parts of the environment, biosurfactants have garnered great interest and attention as an emerging multi-functional technology of the new century for successful removal of heavy metal pollutants. The present study describes the role of biosurfactants in the bioremediation of heavy metals from contaminated environments. Moreover, the interaction mechanism underlying biosurfactant-metal complexation and metal remediation are discussed. Based on the review of the literature, further research is warranted to elucidate the mechanistic roles and explore the structural characterization and gene regulation of biosurfactants to improve their productivity and expand their applicability in bioremediation.

Valorization of Dairy Wastes: Integrative Approaches for Value Added Products

The era of rapid industrialization succeeded by a shift in organizational focus on research and technology development which has fueled many industries along with the dairy industry to grow at an exponential rate. The dairy industry has achieved remarkable growth in the last decade in India. Waste produced by dairy industry consists of a high organic load thus cannot be discharged untreated. Even though treatment and management of waste are well documented, but the main problem is concerned with sludge produced after treatment. There is a gap in the application of various methods for effective treatment of the waste, hence there is a need for technology-oriented research in this area because of a paradigm shift in perspectives towards sustainable management of waste to recover value added products including energy as energy demand is also rising. Sludge which is generally land spread can also be used for energy generation. This paper discusses the environmental effects of waste generated due to dairy industrial activities; various methods used for the advanced treatment of dairy waste. This review article aims to present and discuss the state-of-art information for recovery of value-added products (single cell protein, biofertilizers, biopolymers and biosurfactants) from dairy waste with emphasis on integration of technologies for environmental sustainability. This paper also includes challenges and future perspectives in this field.

Exploiting Microbes in the Petroleum Field: Analyzing the Credibility of Microbial Enhanced Oil Recovery (MEOR)

Crude oil is a major energy source that is exploited globally to achieve economic growth. To meet the growing demands for oil, in an environment of stringent environmental regulations and economic and technical pressure, industries have been required to develop novel oil salvaging techniques. The remaining ~70% of the world’s conventional oil (one-third of the available total petroleum) is trapped in depleted and marginal reservoirs, and could thus be potentially recovered and used. The only means of extracting this oil is via microbial enhanced oil recovery (MEOR). This tertiary oil recovery method employs indigenous microorganisms and their metabolic products to enhance oil mobilization. Although a significant amount of research has been undertaken on MEOR, the absence of convincing evidence has contributed to the petroleum industry’s low interest, as evidenced by the issuance of 400+ patents on MEOR that have not been accepted by this sector. The majority of the world’s MEOR field trials are briefly described in this review. However, the presented research fails to provide valid verification that the microbial system has the potential to address the identified constraints. Rather than promising certainty, MEOR will persist as an unverified concept unless further research and investigations are carried out.

A critical review on various feedstocks as sustainable substrates for biosurfactants production: a way towards cleaner production

The quest for a chemical surfactant substitute has been fuelled by increased environmental awareness. The benefits that biosurfactants present like biodegradability, and biocompatibility over their chemical and synthetic counterparts has contributed immensely to their popularity and use in various industries such as petrochemicals, mining, metallurgy, agrochemicals, fertilizers, beverages, cosmetics, etc. With the growing demand for biosurfactants, researchers are looking for low-cost waste materials to use them as substrates, which will lower the manufacturing costs while providing waste management services as an add-on benefit. The use of low-cost substrates will significantly reduce the cost of producing biosurfactants. This paper discusses the use of various feedstocks in the production of biosurfactants, which not only reduces the cost of waste treatment but also provides an opportunity to profit from the sale of the biosurfactant. Furthermore, it includes state-of-the-art information about employing municipal solid waste as a sustainable feedstock for biosurfactant production, which has not been simultaneously covered in many published literatures on biosurfactant production from different feedstocks. It also addresses the myriad of other issues associated with the processing of biosurfactants, as well as the methods used to address these issues and perspectives, which will move society towards cleaner production.

A review on biosurfactants: properties, applications and current developments

Microbial surfactants are a large number of amphipathic biomolecules with a myriad of biomolecule constituents from various microbial sources that have been studied for their surface tension reduction activities. With unique properties, their applications have been increased in different areas including environment, medicine, healthcare, agriculture and industries. The present review aims to study the biochemistry and biosynthesis of biosurfactants exhibiting varying biomolecular structures which are produced by different microbial sources. It also provides details on roles played by biosurfactants in nature as well as their potential applications in various sectors. Basic biomolecule content of all the biosurfactants studied showed presence of carbohydrates, aminoacids, lipids and fattyacids. The data presented here would help in designing, synthesis and application of tailor-made novel biosurfactants. This would pave a way for perspectives of research on biosurfactants to overcome the existing bottlenecks in this field.

Rhamnolipid pretreatment enhances methane production from two-phase anaerobic digestion of waste activated sludge

In this work, a rhamnolipid (RL) pretreatment technology was proposed to promote methane production from two-phase anaerobic digestion of waste activated sludge. In the first phase (i.e., acidogenic phase), the WAS hydrolysis and acidogenesis were significantly enhanced after RL pretreatment for 4 day, under which the concentration of soluble protein and the short-chain fatty acids (SCFA) in the presence of RL at 0.04 g/g TSS was respectively 2.50 and 5.02 times higher than that without RL pretreatment. However, methane production was inhibited in the presence of RL. In the second phase (i.e., methanogenic phase), batch biochemical methane potential tests suggested that the addition of RL is effective in promoting anaerobic methane production. With an increase of RL dosage from 0 to 0.04 g/g TSS, the cumulative methane yield increased from 100.42 ± 3.01 to 168.90 ± 5.42 mL. Although the added RL could be utilized to produce methane, it was not the major contributor to the enhancement of methane yield. Further analysis revealed that total cumulative yield from the entire two-phase anaerobic digestion (sum of the yield of the acidogenic phase and methanogenic phase) increased from 113.42 ± 3.56 to 164.18 ± 5.20 mL when RL dosage increased from 0 to 0.03 g/g TSS, indicating that the addition of RL induced positive effect on the methane production of the entire two-phase anaerobic digestion. The enzyme activity analysis showed that although higher dosages of RL still inhibited the microorganisms related to methanogenesis to some extends in the methanogenic phase, the inhibitory effect was significantly weakened compared to the acidogenic phase. Microbial analysis revealed that RL reduced the abundance of Candidatus_Methanofastidiosum sp. while increased the abundance of Methanosaeta sp., causing the major methanogenesis pathway to change from hydrogenotrophic to aceticlastic. Moreover, the community of hydrolytic microbes and acidogens was shifted in the direction that is conducive to hydrolysis-acidogenesis. The findings reported not only expand the application field of RL, but also may provide supports for sustainable operation of wastewater treatment plants (WWTPs).