Recent developments and key barriers to microbial CO2 electrobiorefinery

Enhanced astaxanthin production in Haematococcus lacustris by electrochemical stimulation of cyst germination

This study investigated the technical feasibility of using electrogermination to activate dormant cysts as an inoculum for subsequent 14-d photosynthetic astaxanthin production in Haematococcus lacustris. Electrotreatment affected the cell viability, surface charge, and morphology of H. lacustris cysts. At an optimal voltage of 2 V for 60 min, the cyst germination rate peaked at 44.6 % after 1 d, representing a 2.2-fold increase compared with that of the untreated control. Notably, electrogermination significantly enhanced both the astaxanthin content (44.9 mg/g cell) and productivity (13.2 mg/L/d) after 14 d of photobioreactor cultivation, corresponding to 1.7- and 1.5-fold increases compared with those in control, respectively. However, excessive electrotreatment, particularly at voltages exceeding 2 V or for durations beyond 60 min, did not enhance the astaxanthin production capability of H. lacustris. Proper optimization of renewable electrogermination can enable sustainable algal biorefinery to produce multiple bioactive products without compromising cell viability and astaxanthin productivity.

Impact of cell voltage on synthesis of caproic acid from carbon dioxide and ethanol in direct current powered microbial electrosynthesis cell

Production of medium chain fatty acids (MCFAs) from CO2 through microbial electrosynthesis (MES) holds great potential. The present study investigated the effect of cathode voltages of - 0.8 V (MES-1), -1.0 V (MES-2) and -1.2 V vs Ag/AgCl (MES-3), on the production of MCFAs from CO2 and ethanol using an enriched culture. Direct current (DC) power supply was used to maintain constant cathode voltages. The highest amounts of caproic acid were produced in MES-2 at an average concentration of 1.51 ± 0.14 g/L with a maximum selectivity of 68 ± 7 %. Microbial diversity analysis showed abundance of the Clostridiaceae family that allowed chain elongation in all MES reactors. This study shows that potentiostatic control approach for MCFA synthesis, can be replaced by DC power supply in future MES setups. Using selective culture enrichment, MES efficiently produces MCFAs from CO2 and ethanol, with -1.0 V yielding the highest caproic acid.

Waste Valorization in a Sustainable Bio-Based Economy: The Road to Carbon Neutrality

The development of sustainable chemistry underlying the quest to minimize and/or valorize waste in the carbon-neutral manufacture of chemicals is followed over the last four to five decades. Both chemo- and biocatalysis have played an indispensable role in this odyssey. in particular developments in protein engineering, metagenomics and bioinformatics over the preceding three decades have played a crucial supporting role in facilitating the widespread application of both whole cell and cell-free biocatalysis. The pressing need, driven by climate change mitigation, for a drastic reduction in greenhouse gas (GHG) emissions, has precipitated an energy transition based on decarbonization of energy and defossilization of organic chemicals production. The latter involves waste biomass and/or waste CO2 as the feedstock and green electricity generated using solar, wind, hydroelectric or nuclear energy. The use of waste polysaccharides as feedstocks will underpin a renaissance in carbohydrate chemistry with pentoses and hexoses as base chemicals and bio-based solvents and polymers as environmentally friendly downstream products. The widespread availability of inexpensive electricity and solar energy has led to increasing attention for electro(bio)catalysis and photo(bio)catalysis which in turn is leading to myriad innovations in these fields.

Comparing the performance of fluidized and fixed granular activated carbon beds as cathodes for microbial electrosynthesis of carboxylates from CO2

Microbial electrosynthesis (MES) can use renewable electricity to power microbial conversion of carbon dioxide (CO2) into carboxylates. To ensure high productivities in MES, good mass transfer must be ensured, which could be accomplished with fluidization of granular activated carbon (GAC). In this study, fluidized and fixed GAC bed cathodes were compared. Acetate production rate and current density were 42 % and 47 % lower, respectively, in fluidized than fixed bed reactors. Although similar microbial consortium dominated by Eubacterium and Proteiniphilum was observed, lowest biomass quantity was measured with fixed GAC bed indicating higher specific acetate production rates compared to fluidized GAC bed. Furthermore, charge efficiency was the highest and charge recovery in carboxylates the lowest in fixed GAC beds indicating enhanced hydrogen evolution and need for enhancing CO2 feeding to enable higher production rates of acetate. Overall, fixed GAC beds have higher efficiency for acetate production in MES than fluidized GAC beds.

Enhancing microbial CO2 electrocatalysis for multicarbon reduction in a wet amine-based catholyte

Microbial CO2 electroreduction (mCO2ER) offers a promising approach for producing high-value multicarbon reductants from CO2 by combining CO2 fixing microorganisms with conducting materials (i. e., cathodes). However, the solubility and availability of CO2 in an aqueous electrolyte pose significant limitations in this system. This study demonstrates the efficient production of long-chain multicarbon reductants, specifically carotenoids (~C40), within a wet amine-based catholyte medium during mCO2ER. Optimizing the concentration of the biocompatible CO2 absorbent, monoethanolamine (MEA), led to enhanced CO2 fixation in the electroautotroph bacteria. Molecular biological analyses revealed that MEA in the catholyte medium redirected the carbon flux towards carotenoid biosynthesis during mCO2ER. The faradaic efficiency of mCO2ER with MEA for carotenoid production was 4.5-fold higher than that of the control condition. These results suggest the mass transport bottleneck in bioelectrochemical systems could be effectively addressed by MEA-assissted mCO2ER, enabling highly efficient production of valuable products from CO2.

Metabolic engineering strategies to enable microbial electrosynthesis utilization of CO2: recent progress and challenges

Microbial electrosynthesis (MES) is a promising technology that mainly utilizes microbial cells to convert CO2 into value-added chemicals using electrons provided by the cathode. However, the low electron transfer rate is a solid bottleneck hindering the further application of MES. Thus, as an effective strategy, genetic tools play a key role in MES for enhancing the electron transfer rate and diversity of production. We describe a set of genetic strategies based on fundamental characteristics and current successes and discuss their functional mechanisms in driving microbial electrocatalytic reactions to fully comprehend the roles and uses of genetic tools in MES. This paper also analyzes the process of nanomaterial application in extracellular electron transfer (EET). It provides a technique that combines nanomaterials and genetic tools to increase MES efficiency, because nanoparticles have a role in the production of functional genes in EET although genetic tools can subvert MES, it still has issues with difficult transformation and low expression levels. Genetic tools remain one of the most promising future strategies for advancing the MES process despite these challenges.

Enhancing CH4 production in microbial electrolysis cells: Optimizing electric field via carbon cathode resistivity

Microbial electrolysis cells (MECs) are increasingly recognized as a promising technology for converting CO2 to CH4, offering the dual benefits of energy recovery from organic wastewater and CO2 emission reduction. A critical aspect of this technology is the enhancement of the electron-accepting capacity of the methanogenic biocathode to improve CH4 production efficiency. This study demonstrates that adjusting the cathode resistivity is an effective way to control the electric field intensity, thereby enhancing the electron accepting capacity and CH4 production. By maintaining the electric field intensity within approximately 8.50-10.83 mV·cm-1, the CH4 yield was observed to increase by up to two-fold. The improvement in CH4 production under optimized electric field conditions was attributed to the enhancement of the direct accepting capacity of the biocathode. This enhancement was primarily due to an increase in the relative abundance of Methanosaeta by approximately 10 % and an up to 83.78 % rise in the electron-accepting capacity of the extracellular polymeric substance. These insights offer a new perspective on the operation of methanogenic biocathodes and propose a novel biocathode construction methodology based on these findings, thus contributing to the enhancement of MEC efficiency.

Novel electrochemical strategies for the microbial conversion of CO2 into biomass and volatile fatty acids using a fluid-like bed electrode in a three-phase reactor

Microbial electrosynthesis (MES) constitutes a bioelectrochemical process where bacteria uptake electrons extracellularly from a polarized electrode to incorporate them into their anabolic metabolism. However, the efficiency of current MES reactor designs can be lower than expected due to limitations regarding electron transfer and mass transport. One of the most promising bioreactor configurations to overcome these bottlenecks is the Microbial Electrochemical Fluidized Bed Reactor (ME-FBR). In this study, microbial CO2 fixation is investigated for the first time in a ME-FBR operated as a 3-phase reactor (solid-liquid-gas). An electroconductive carbon bed, acting as a working electrode, was fluidized with gas and polarized at different potentials (-0.6, -0.8 and -1 V vs. Ag/AgCl) so it could act as an electron donor (biocathode). Under these potentials, CO2 fixation and electron transfer were evaluated. Autotrophic electroactive microorganisms from anaerobic wastewater were enriched in a ME-FBR in the presence of 2-bromoethanosulfonic acid (BES) to inhibit the growth of methanogens. Cyclic voltammetry analysis revealed interaction between the microorganisms and the cathode. Furthermore, volatile fatty acids like propionate, formate and acetate were detected in the culture supernatant. Acetate production had a maximum rate of ca. 1 g L-1  day-1 . Planktonic cell biomass was produced under continuous culture at values as high as ca. 0.7 g L-1 dry weight. Overall, this study demonstrates the feasibility of employing a fluidized electrode with gaseous substrates and electricity as the energy source for generating biomass and carboxylic acids.

Purification mechanism of microbial metabolism in kitchen-oil wastewater enhanced by cationic vacancies on γ-Al2O3

The use of catalyst materials to mediate the enhancement of microbial degradation in wastewater is a new economic and energy saving breakthrough in water treatment technology. In this study, γ-Al2O3, which is commonly used as catalyst/carrier, is used as biological filler to treat kitchen-oil wastewater with low biodegradability, and the COD removal rate is about 50 %. It is found that the complexation of cationic vacancies on Al2O3 surface with extracellular polymeric substance (EPS) secreted by microorganisms in wastewater lead to the polarization of electron distribution on biofilm. The efficient degrading bacteria are enriched on reaction interface and obtain electrons to maintain electron dynamic balance by enhancing the transmembrane metabolism of pollutants. The aluminum vacancies on Al2O3 surface accelerate the microbial degradation of pollutants. The cationic vacancies in the structure of catalyst accelerate the acquisition of exogenous electrons by microorganisms without the addition of external energy, which provides a new idea for catalytic fillers to enhance wastewater degradation.

Perspectives for Using CO2 as a Feedstock for Biomanufacturing of Fuels and Chemicals

Microbial cell factories offer an eco-friendly alternative for transforming raw materials into commercially valuable products because of their reduced carbon impact compared to conventional industrial procedures. These systems often depend on lignocellulosic feedstocks, mainly pentose and hexose sugars. One major hurdle when utilizing these sugars, especially glucose, is balancing carbon allocation to satisfy energy, cofactor, and other essential component needs for cellular proliferation while maintaining a robust yield. Nearly half or more of this carbon is inevitably lost as CO2 during the biosynthesis of regular metabolic necessities. This loss lowers the production yield and compromises the benefit of reducing greenhouse gas emissions-a fundamental advantage of biomanufacturing. This review paper posits the perspectives of using CO2 from the atmosphere, industrial wastes, or the exhausted gases generated in microbial fermentation as a feedstock for biomanufacturing. Achieving the carbon-neutral or -negative goals is addressed under two main strategies. The one-step strategy uses novel metabolic pathway design and engineering approaches to directly fix the CO2 toward the synthesis of the desired products. Due to the limitation of the yield and efficiency in one-step fixation, the two-step strategy aims to integrate firstly the electrochemical conversion of the exhausted CO2 into C1/C2 products such as formate, methanol, acetate, and ethanol, and a second fermentation process to utilize the CO2-derived C1/C2 chemicals or co-utilize C5/C6 sugars and C1/C2 chemicals for product formation. The potential and challenges of using CO2 as a feedstock for future biomanufacturing of fuels and chemicals are also discussed.

Identification and synergetic mechanism of TCE, H2 and O2 metabolic microorganisms in the joint H2/O2 system

The sole H₂ and O₂ usually promote chlorinated hydrocarbons (CHCs) biotransformation by several mechanisms, including reductive dechlorination and aerobic oxidation. However, the mechanism of the CHCs transformation in joint H₂ and O₂ system (H₂/O₂ system) is still unclear. In this study, the degradation kinetics of trichloroethene (TCE) were investigated and DNA stable isotope probing (DNA-SIP) were used to explore the synergistic mechanism of functional microorganisms on TCE degradation under the condition of H₂/O₂ coexistence. In the H₂/O₂ microcosm, TCE was significantly removed by 13.00 μM within 40 days, much higher than N₂, H₂ and O₂ microcosms, and 1,1-DCE was detected as an intermediate. DNA-SIP technology identified three anaerobic TCE metabolizers, five aerobic TCE metabolizers, nine hydrogen-oxidizing bacteria (HOB), some TCE metabolizers utilizing limited O₂, and some anaerobic dechlorinating bacteria reductively using H₂ to dechlorinate TCE. It is also confirmed for the first time that 3 OUTs belonging to Methyloversatilis and SH-PL14 can simultaneously utilize H₂ and O₂ as energy sources to grow and metabolize TCE or 1,1-DCE. HOB may provide carbon sources or electron acceptors or donors for TCE biotransformation. These findings confirm the coexistence of anaerobic and aerobic TCE metabolizers and degraders, which synergistically promoted the conversion of TCE in the joint H₂/O₂ system. Our results provide more information about the functional microbe resources and synergetic mechanisms for TCE degradation.

Simultaneous enhancement of lipid biosynthesis and solvent extraction of Chlorella using aminoclay nanoparticles

Magnesium aminoclay nanoparticles (MgANs) exert opposing effects on photosynthetic microalgae by promoting carbon dioxide (CO₂) uptake and inducing oxidative stress. This study explored the potential application of MgAN in the production of algal lipids under high CO₂ concentrations. The impact of MgAN (0.05-1.0 g/L) on cell growth, lipid accumulation, and solvent extractability varied among three tested oleaginous Chlorella strains (N113, KR-1, and M082). Among them, only KR-1 exhibited significant improvement in both total lipid content (379.4 mg/g cell) and hexane lipid extraction efficiency (54.5%) in the presence of MgAN compared to those of controls (320.3 mg/g cell and 46.1%, respectively). This improvement was attributed to the increased biosynthesis of triacylglycerols and a thinner cell wall based on thin-layer chromatography and electronic microscopy, respectively. These findings suggest that using MgAN with robust algal strains can enhance the efficiency of cost-intensive extraction processes while simultaneously increasing the algal lipid content.

Enhanced purification of kitchen-oil wastewater driven synergistically by surface microelectric fields and microorganisms

The stable structure and toxic effect of refractory organic pollutants in wastewater lead to the problem of high energy consumption in water treatment technology. Herein, we propose a synergistic purification of refractory wastewater driven by microorganisms and surface microelectric fields (SMEF) over a dual-reaction-center (DRC) catalyst HCLL-S8-M prepared by an in situ growth method of carbon nitride on the Cu-Al₂O₃ surface. Characterization techniques demonstrate the successful construction of SMEF with strong electrostatic force over HCLL-S8-M based on cation-π interactions between metal copper ions and carbon nitride rings. With the catalyst as the core filler, an innovative fixed bed bioreactor is constructed to purify the actual kitchen-oil wastewater. The removal efficiency of the wastewater even with a very low biodegradability (BOD₅/COD = 0.33) can reach 60% after passing through this bioreactor. An innovative reaction mechanism is revealed for the first time that under the condition of a small amount of biodegradable organic matter, the SMEF induces the enrichment of electric active microorganisms (Desulfobulbus and Geobacter) in the wastewater, accelerates the interspecies electron transfer of intertrophic metabolism with the biodegradable bacteria through the extracellular electron transfer mechanism such as cytochrome C and self-secreted electron shuttle. The electrons of the refractory organic pollutants adsorbed on the surface of the catalyst are delocalized by the SMEF, which can be directly utilized by microorganisms through EPS conduction. The SMEF generated by electron polarization can maximize the utilization of pollutants and microorganisms in wastewater and further enhance degradation without adding any external energy, which is of great significance to the development of water self-purification technology.

Microbial electrosynthesis: carbonaceous electrode materials for CO2 conversion

Microbial electrosynthesis (MES) is a sustainable approach to address greenhouse gas (GHG) emissions using anthropogenic carbon dioxide (CO₂) as a building block to create clean fuels and highly valuable chemicals. The efficiency of MES-based CO₂ conversion is closely related to the performance of electrode material and, in particular, the cathode for which carbonaceous materials are frequently used. Compared to expensive metal electrodes, carbonaceous materials are biocompatible with a high specific surface area, wide range of possible morphologies, and excellent chemical stability, and their use can maximize the growth of bacteria and enhance electron transfer rates. Examples include MES cathodes based on carbon nanotubes, graphene, graphene oxide, graphite, graphite felt, graphitic carbon nitride (g-C₃N₄), activated carbon, carbon felt, carbon dots, carbon fibers, carbon brushes, carbon cloth, reticulated vitreous carbon foam, MXenes, and biochar. Herein, we review the state-of-the-art MES, including thermodynamic and kinetic processes that underpin MES-based CO₂ conversion, as well as the impact of reactor type and configuration, selection of biocompatible electrolytes, product selectivity, and the use of novel methods for stimulating biomass accumulation. Specific emphasis is placed on carbonaceous electrode materials, their 3D bioprinting and surface features, and the use of waste-derived carbon or biochar as an outstanding material for further improving the environmental conditions of CO₂ conversion using carbon-hungry microbes and as a step toward the circular economy. MES would be an outstanding technique to develop rocket fuels and bioderived products using CO₂ in the atmosphere for the Mars mission.

Cell disruption and lipid extraction from Chlorella species for biorefinery applications: Recent advances

Chlorella is a promising microalga for CO₂-neutral biorefinery that co-produces drop-in biofuels and multiple biochemicals. Cell disruption and selective lipid extraction steps are major technical bottlenecks in biorefinement because of the inherent robustness and complexity of algal cell walls. This review focuses on the state-of-the-art achievements in cell disruption and lipid extraction methods for Chlorella species within the last five years. Various chemical, physical, and biological approaches have been detailed theoretically, compared, and discussed in terms of the degree of cell wall disruption, lipid extractability, chemical toxicity, cost-effectiveness, energy use, scalability, customer preferences, environment friendliness, and synergistic combinations of different methods. Future challenges and prospects of environmental-friendly and efficient extraction technologies are also outlined for practical applications in sustainable Chlorella biorefineries. Given the diverse industrial applications of Chlorella, this review may provide useful information for downstream processing of the advanced biorefineries of other algae genera.

Enhancing the selective synthesis of butyrate in microbial electrosynthesis system by gas diffusion membrane composite biocathode

The reduction of carbon dioxide (CO₂) to high value-added multi-carbon compounds at the cathode is an emerging application of microbial electrosynthesis system (MES). In this study, a composite cathode consisting of hollow fiber membrane (HFM) and the carbon felt is designed to enhance the CO₂ mass transfer of the cathode. The result shows that the main products are acetate and butyrate without other substances. The electrochemical performance of the electrode is significantly improved after biofilm becomes matures. The composite cathode significantly reduces the "threshold" for the synthesis of butyrate. Moreover, CO₂ is dissolved and protons are consumed by synthesizing volatile fatty acids (VFAs) to maintain a stable pH inside the composite electrode. The synthesis mechanism of butyrate is that CO₂ is converted sequentially into acetate and butyrate. The microenvironment of the composite electrode enriches Firmicute. This composite electrode provides a novel strategy for regulating the microenvironment.

Model development of bioelectrochemical systems: A critical review from the perspective of physiochemical principles and mathematical methods

Bioelectrochemical systems (BESs) are promising devices for wastewater treatment and bio-energy production. Since various processes are interacted and affect the overall performance of the device, the development of theoretical modeling is an efficient approach to understand the fundamental mechanisms that govern the performance of the BES. This review aims to summarize the physiochemical principle and mathematical method in BES models, which is of great importance for the establishment of an accurate model while has received little attention in previous reviews. In this review, we begin with a classification of existing models including bioelectrochemical models, electronic models, and machine learning models. Subsequently, physiochemical principles and mathematical methods in models are discussed from two aspects: one is the description of methodology how to build a framework for models, and the other is to further review additional methods that can enrich model functions. Finally, the advantages/disadvantages, extended applications, and perspectives of models are discussed. It is expected that this review can provide a viewpoint from methodologies to understand BES models.

Development of a rapid startup method of direct electron transfer-dominant methanogenic microbial electrosynthesis

The rapid startup of carbon dioxide reduction-methanogenic microbial electrosynthesis is crucial for its industrial application, and the development of cathode biofilm is the key to its industrialization. Based on the new discovery that biofilm formed by placing graphite felt in an anaerobic reactor was electroactive, with strong direct electron transfer and methanogenesis ability (24.52 mL/L/d), a new startup method was developed. The startup time was shortened by at least 20 days and charge transfer resistance was reduced by 4.45-10.78 times than common startup methods (inoculating cathode effluent or granular sludge into the cathode chamber). The new method enriched electroactive bacteria. Methanobacterium and Methanosaeta accounted for 62.04% and 34.96%, respectively. The common methods inoculating cathode effluent or granular sludge enriched hydrogenotrophic microorganisms (>95%) or Methanosaeta (54.10%) due to the local environments of cathode. This new rapid and easy startup method may support the scale-up of microbial electrosynthesis.

Effective salt removal from domestic reverse osmosis reject water in a microbial desalination cell

Microbial desalination cells (MDC) are evaluated as an environmentally friendly approach for purifying saline water by using power generated by the decomposition of organic materials in the wastewater. The present study is to evaluate the ferrocyanide-redox and biocathode approach in treating simulated saline water and subsequently recovering bio-electricity using actual domestic reverse osmosis reject water. For the desalination of simulated saline water and domestic reverse osmosis reject water, a three-chamber microbial desalination cell with graphite electrodes and anion and cation exchange membranes was constructed. When treating simulated saline water, the biocathode technique achieved a 5% improvement in salt removal and a 4.9% increase in current and power density when compared to the ferrocyanide-redox approach. When biocathode MDC was used to treat domestic reverse osmosis reject water, a maximum current and power density of 3.81 μA/cm² and 0.337 μW/cm², respectively, were recorded, as well as COD removal of 83.9% at the desalination chamber and ions reduction for Na, K, and Ca of up to 79%, 76.5%, and 72%, respectively, in a batch operation for 31 days with a stable pH (≈ 7). Thus, the study revealed a microbial desalination cell capable of recovering bioenergy and reducing salt from domestic reverse osmosis reject water with a consistent pH range.

Green Chemistry, Biocatalysis, and the Chemical Industry of the Future

In the movement to decarbonize our economy and move away from fossil fuels we will need to harness the waste products of our activities, such as waste lignocellulose, methane, and carbon dioxide. Our wastes need to be integrated into a circular economy where used products are recycled into a manufacturing carbon cycle. Key to this will be the recycling of plastics at the resin and monomer levels. Biotechnology is well suited to a future chemical industry that must adapt to widely distributed and diverse biological chemical feedstocks. Our increasing mastery of biotechnology is allowing us to develop enzymes and organisms that can synthesize a widening selection of desirable bulk chemicals, including plastics, at commercially viable productivities. Integration of bioreactors with electrochemical systems will permit new production opportunities with enhanced productivities and the advantage of using a low-carbon electricity from renewable and sustainable sources.

"Electroactive biofilms: how microbial electron transfer enables bioelectrochemical applications"

Microbial biofilms are ubiquitous. In marine and freshwater ecosystems, microbe–mineral interactions sustain biogeochemical cycles, while biofilms found on plants and animals can range from pathogens to commensals. Moreover, biofouling and biocorrosion represent significant challenges to industry. Bioprocessing is an opportunity to take advantage of biofilms and harness their utility as a chassis for biocommodity production. Electrochemical bioreactors have numerous potential applications, including wastewater treatment and commodity production. The literature examining these applications has demonstrated that the cell–surface interface is vital to facilitating these processes. Therefore, it is necessary to understand the state of knowledge regarding biofilms’ role in bioprocessing. This mini-review discusses bacterial biofilm formation, cell–surface redox interactions, and the role of microbial electron transfer in bioprocesses. It also highlights some current goals and challenges with respect to microbe-mediated bioprocessing and future perspectives.

Enhanced CO2 electroconversion of Rhodobacter sphaeroides by cobalt-phosphate complex assisted water oxidation

CO₂ can be a next generation feedstock for electricity-driven bioproduction due to its abundance and availability. Microbial electrosynthesis (MES), a promising technique for CO₂ electroconversion, provides an attractive route for the production of valuable products from CO₂, but issues surrounding efficiency and reasonable productivity should be resolved. Improving the anode performance for water oxidation under neutral pH is one of the most important aspects to advance current MES. Here, we introduce cobalt-phosphate (Co-Pi) assisted water oxidation at the counter electrode (i.e., anode) to upgrade the MES performance at pH 7.0. We show that CO₂ can be converted by photochemoautotrophic bacterium, Rhodobacter sphaeroides into organic acids and carotenoids in the MES reactor. Planktonic cells of R. sphareroides in the Co-Pi anode equipped MES reactor was ca. 1.5-fold higher than in the control condition (w/o Co-Pi). The faradaic efficiency of the Co-Pi anode equipped MES reactor was remarkably higher (58.3%) than that of the bare anode (27.8%). While the system can improve the CO₂ electroconversion nonetheless there are some further optimizations are necessary.

Yeast metabolic engineering for carbon dioxide fixation and its application

As numerous industrial bioprocesses rely on yeast fermentation, developing CO₂-fixing yeast strains can be an attractive option toward sustainable industrial processes and carbon neutrality. Recent studies have shown that the expression of ribulose-1,5-bisphosphate carboxylase-oxygenase (RuBisCO) in yeasts, such as Saccharomyces cerevisiae and Kluyveromyces marxianus, enables mixotrophic CO₂ fixation and production of biofuels. Also, the expression of a synthetic Calvin-Benson-Bassham (CBB) cycle including RuBisCO in Pichia pastoris enables autotrophic growth on CO₂. This review highlights recent advances in metabolic engineering strategies to enable CO₂ fixation in yeasts. Also, we discuss the potentials of other natural and synthetic metabolic pathways independent of RuBisCO for developing CO₂-fixing yeast strains capable of producing value-added biochemicals.

Modulation of Antioxidant Activity Enhances Photoautotrophic Cell Growth of Rhodobacter sphaeroides in Microbial Electrosynthesis

Global warming is currently accelerating due to an increase in greenhouse gas emissions by industrialization. Microbial electrosynthesis (MES) using electroactive autotrophic microorganisms has recently been reported as a method to reduce carbon dioxide, the main culprit of greenhouse gas. However, there are still few cases of application of MES, and the molecular mechanisms are largely unknown. To investigate the growth characteristics in MES, we carried out growth tests according to reducing power sources in Rhodobacter sphaeroides. The growth rate was significantly lower when electrons were directly supplied to cells, compared to when hydrogen was supplied. Through a transcriptome analysis, we found that the expression of reactive oxygen species (ROS)-related genes was meaningfully higher in MES than in normal photoautotrophic conditions. Similarly, endogenous contents of H2O2 were higher and peroxidase activities were lower in MES. The exogenous application of ascorbic acid, a representative biological antioxidant, promotes cell growth by decreasing ROS levels, confirming the inhibitory effects of ROS on MES. Taken together, our observations suggest that reduction of ROS by increasing antioxidant activities is important for enhancing the cell growth and production of CO2-converting substances such as carotenoids in MES in R. sphaeroides

Surface Modification of a Graphite Felt Cathode with Amide-Coupling Enhances the Electron Uptake of Rhodobacter sphaeroides

Microbial electrosynthesis (MES) is a promising technology platform for the production of chemicals and fuels from CO2 and external conducting materials (i.e., electrodes). In this system, electroactive microorganisms, called electrotrophs, serve as biocatalysts for cathodic reaction. While several CO2-fixing microorganisms can reduce CO2 to a variety of organic compounds by utilizing electricity as reducing energy, direct extracellular electron uptake is indispensable to achieve highly energy-efficient reaction. In the work reported here, Rhodobacter sphaeroides, a CO2-fixing chemoautotroph and a potential electroactive bacterium, was adopted to perform a cathodic CO2 reduction reaction via MES. To promote direct electron uptake, the graphite felt cathode was modified with a combination of chitosan and carbodiimide compound. Robust biofilm formation promoted by amide functionality between R. sphaeroides and a graphite felt cathode showed significantly higher faradaic efficiency (98.0%) for coulomb to biomass and succinic acid production than those of the bare (34%) and chitosan-modified graphite cathode (77.8%), respectively. The results suggest that cathode modification using a chitosan/carbodiimide composite may facilitate electron utilization by improving direct contact between an electrode and R. sphaeroides.

Recent advances in the improvement of bi-directional electron transfer between abiotic/biotic interfaces in electron-assisted biosynthesis system

As an important biosynthesis technology, electron-assisted biosynthesis (EABS) system can utilize exogenous electrons to regulate the metabolic network of microorganisms, realizing the biosynthesis of high value-added chemicals and CO₂ fixation. Electrons play crucial roles as the energy carriers in the EABS process. In fact, efficient interfacial electron transfer (ET) is the decisive factor to realize the rapid energy exchange, thus stimulating the biosynthesis of target metabolic products. However, due to the interfacial resistance of ET between the abiotic solid electrode and biotic microbial cells, the low efficiency of interfacial ET has become a major bottleneck, further limiting the practical application of EABS system. As the cell membrane is insulated, even the cell membrane embedded electron conduit (no matter cytochromes or channel protein for shuttle transferring) to increase the cell membrane conductivity, the ET between membrane electron conduit and electrode surface is kinetically restricted. In this review, the pathway of bi-directional interfacial ET in EABS system was summarized. Furthermore, we reviewed representative milestones and advances in both the anode outward interfacial ET (from organism to electrode) and cathode inward interfacial ET (from electrode to organism). Here, new insights from the perspectives of material science and synthetic biology were also proposed, which were expected to provide some innovative opinions and ideas for the following in-depth studies.

Electric Stimulation of Astaxanthin Biosynthesis in Haematococcus pluvialis

The green microalga Haematococcus pluvialis accumulates astaxanthin, a potent antioxidant pigment, as a defense mechanism against environmental stresses. In this study, we investigated the technical feasibility of a stress-based method for inducing astaxanthin biosynthesis in H. pluvialis using electric stimulation in a two-chamber bioelectrochemical system. When a cathodic (reduction) current of 3 mA (voltage: 2 V) was applied to H. pluvialis cells for two days, considerable lysis and breakage of algal cells were observed, possibly owing to the formation of excess reactive oxygen species at the cathode. Conversely, in the absence of cell breakage, the application of anodic (oxidation) current effectively stimulated astaxanthin biosynthesis at a voltage range of 2–6 V, whereas the same could not be induced in the untreated control. At an optimal voltage of 4 V (anodic current: 30 mA), the astaxanthin content in the cells electro-treated for 2 h was 36.9% higher than that in untreated cells. Our findings suggest that electric treatment can be used to improve astaxanthin production in H. pluvialis culture if bioelectrochemical parameters, such as electric strength and duration, are regulated properly.