Recent advances in green solvents for lignocellulosic biomass pretreatment: Potential of choline chloride (ChCl) based solvents

Developing endophytic Penicillium oxalicum as a source of lignocellulolytic enzymes for enhanced hydrolysis of biorefinery relevant pretreated rice straw

Endophytic fungi, as plant symbionts, produce an elaborate array of enzymes for efficient disintegration of lignocellulosic biomass into constituent monomeric sugars, making them novel source of lignocellulolytic CAZymes with immense potential in future biorefineries. The present study reports lignocellulolytic enzymes production potential of an endophytic halotolerant Penicillium oxalicum strain isolated from Citrus limon, under submerged and solid-state fermentation (SmF & SSF, respectively), in the presence and absence of salt (1 M NaCl). The comparative QTOF-LC/MS-based exoproteome analysis of the culture extracts unveiled differential expression of CAZymes, with the higher abundance of GH6 and GH7 family cellobiohydrolase in the presence of 1 M salt. The strain improvement program, employing cyclic mutagenesis and diploidization, was utilized to develop hyper-cellulase producing mutant strains of P. oxalicum. The enzyme production of the developed strain (POx-M35) was further enhanced through statistical optimization of the culture conditions utilizing glucose mix disaccharides (GMDs) as an inducer. This optimization process resulted in the lignocellulolytic cocktail that contained high titers (U/mL) of endoglucanase (EG) (146.16), cellobiohydrolase (CBHI) (6.99), β-glucosidase (β-G) (26.21), xylanase (336.05) and FPase (2.02 U/mL), which were 5.47-, 5.54-, 8.55-, 4.96-, and 4.39-fold higher when compared to the enzyme titers obtained in wild HP1, respectively. Furthermore, the lignocellulolytic cocktails designed by blending secretome produced by mutant POx-M35 with xylanases (GH10 and GH11) derived from Malbranchea cinnamomea resulted in efficient hydrolysis of unwashed acid pretreated (UWAP) rice straw slurry and mild alkali deacetylated (MAD) rice straw. This study underscores the potential of bioprospecting novel fungus and developing an improved strain for optimized production and constitution of lignocellulolytic cocktails that can be an important determinant in advancing biomass conversion technologies.

Pretreatment of Vine Shoot Biomass by Choline Chloride-Based Deep Eutectic Solvents to Promote Biomass Fractionation and Enhance Sugar Production

Vine shoots hold promise as a biomass source for fermentable sugars with efficient fractionation and conversion processes. The study explores vine shoots as a biomass source for fermentable sugars through pretreatment with two deep eutectic solvents mixtures: choline chloride:lactic acid 1:5 (ChCl:LA) and choline chloride:ethylene glycol 1:2 (ChCl:EG). Pretreatment conditions, such as temperature/time, solid/liquid ratio, and biomass particle size, were studied. Chemical composition, recovery yields, delignification extent, and carbohydrate conversion were evaluated, including the influence of washing solvents. Temperature and particle size notably affected hemicellulose and lignin dissolution, especially with ChCl:LA. Pretreatment yielded enriched cellulose substrates, with high carbohydrate conversion rates up to 75.2% for cellulose and 99.9% for xylan with ChCl:LA, and 54.6% for cellulose and 60.2% for xylan with ChCl:EG. A 50% acetone/water mixture increased the delignification ratios to 31.5%. The results underscore the potential of this pretreatment for vine shoot fractionation, particularly at 30% solid load, while acknowledging the need for further process enhancement.

Maximizing Degumming Efficiency for Firmiana simplex Bark Using Deep Eutectic Solvents

Degumming is a critical process in the purification of natural fibers, essential for enhancing their quality and usability across various applications. Traditional degumming methods employed for natural fibers encounter inherent limitations, encompassing prolonged procedures, excessive energy consumption, adverse environmental impact, and subpar efficiency. To address these challenges, a groundbreaking wave of degumming technique has emerged, transcending these constraints and heralding a new era of efficiency, sustainability, and eco-friendly techniques. This study represents the Firmiana simplex bark (FSB) fiber's delignification by using deep eutectic solvents (DESs). The study explores the application of deep eutectic solvents, by synthesizing different types of DES using a hydrogen bond acceptor (HBA) and four representative hydrogen bond donors (HBDs) for FSB fiber degumming. This study investigates the morphologies, chemical compositions, crystallinities, and physical properties of Firmiana simplex bark fibers before and after the treatment. Furthermore, the effects and mechanisms of different DESs on dispersing FSB fibers were examined. The experimental results showed that choline chloride-urea (CU)-based DES initiates the degumming process by effectively disrupting the hydrogen bond interaction within FSB fibers, primarily by outcompeting chloride ions. Following this initial step, the DES acts by deprotonating phenolic hydroxyl groups and cleaving β-O-4 bonds present in diverse lignin units, thereby facilitating the efficient removal of lignin from the fibers. This innovative approach resulted in significantly higher degumming efficiency and ecofriendly as compared to traditional methods. Additionally, the results revealed that CU-based DES exhibits the utmost effectiveness in degumming FSB fibers. The optimal degumming conditions involve a precise processing temperature of 160 °C and a carefully controlled reaction time of 2 h yielding the most favorable outcomes. The present study presents a novel straightforward and environmentally friendly degumming method for Firmiana simplex bark, offering a substantial potential for enhancing the overall quality and usability of the resulting fibers. Our findings open new pathways for sustainable fiber-processing technologies.

Recent developments on sustainable biobutanol production: a novel integrative review

Renewable and sustainable biofuel production, such as biobutanol, is becoming increasingly popular as a substitute for non-renewable and depleted petrol fuel. Many researchers have studied how to produce butanol cheaply by considering appropriate feedstock materials and bioprocess technologies. The production of biobutanol through acetone-butanol-ethanol (ABE) is highly sought after around the world because of its sustainable supply and lack of competition with food. The purpose of this study is to present the current biobutanol production research and to analyse the biobutanol research conducted during 2006 to 2023. The keyword used in this study is "Biobutanol," and the relevant data was extracted from the Web of Science database (WoS). According to the results, institutions and scholars from the People's Republic of China, the USA, and India have the highest number of cited papers across a broad spectrum of topics including acetone-butanol-ethanol (ABE) fermentation, biobutanol, various pretreatment techniques, and pervaporation. The success of biobutanol fermentation from biomass depends on the ability of the fermentation operation to match the microbial behaviour along with the appropriate bioprocessing strategies to improve the entire process to be suitable for industrial scale. Based on the review data, we will look at the biobutanol technologies and appropriate strategies that have been developed to improve biobutanol production from renewable biomass.

A Choline-Based Antifreezing Complexing Agent with Selective Compatibility for Zn-Br2 Flow Batteries

The high freezing point of polybromides, charging products, is a significant obstacle to the rapid development of zinc-bromine flow batteries (Zn-Br2 FBs). Here, a choline-based complexing agent (CCA) is constructed to liquefy the polybromides at low temperatures. Depending on quaternary ammonium group, choline can effectively complex with polybromide anions and form dense oil-phase that has excellent antifreezing property. Benefiting from indispensable strong ion-ion interaction, the highly selectively compatible CCA, consisting of choline and N-methyl-N-ethyl-morpholinium salts (CCA-M), can be achieved to further enhance bromine fixing ability. Interestingly, the formed polybromides with CCA-M are able to keep liquid even at -40 °C. The CCA-M endows Zn-Br2 FBs at 40 mA cm-2 with unprecedented long cycle life (over 150 cycles) and high Coulombic efficiency (CE, average ≈98.8%) at -20 °C, but also at room temperature (over 1200 cycles, average CE: ≈94.7%). The CCA shows a promising prospect of application and should be extended to other antifreezing bromine-based energy storage systems.

Machine learning prediction of higher heating value of biochar based on biomass characteristics and pyrolysis conditions

The higher heating value of biochar is an important parameter for the utilization of biomass energy. In this work, extreme gradient boosting regression and artificial neural network were used to predict it based on the characteristics of biomass and pyrolysis conditions. Besides, empirical correlations were developed for comparison. Results showed that the extreme gradient boosting regression models showed better performance (R2 = 0.83-0.94). The shapley additive explanations and partial dependence plot indicated that lignin content and higher heating value of raw material were highly positively correlated with higher heating value of biochar, and found the better conditions such as pyrolysis temperature (>550 °C), lignin content (>40 wt%) for high-higher heating value biochar preparation. What's more, a program that predicted higher heating value of biochar was developed through PySimpleGUI library. It offered a new optimization idea for the directional preparation process of biochar.

A critical assessment on scalable technologies using high solids loadings in lignocellulose biorefinery: challenges and solutions

The pretreatment and the enzymatic saccharification are the key steps in the extraction of fermentable sugars for further valorization of lignocellulosic biomass (LCB) to biofuels and value-added products via biochemical and/or chemical conversion routes. Due to low density and high-water absorption capacity of LCB, the large volume of water is required for its processing. Integration of pretreatment, saccharification, and co-fermentation has succeeded and well-reported in the literature. However, there are only few reports on extraction of fermentable sugars from LCB with high biomass loading (>10% Total solids-TS) feasible to industrial reality. Furthermore, the development of enzymatic cocktails can overcome technology hurdles with high biomass loading. Hence, a better understanding of constraints involved in the development of technology with high biomass loading can result in an economical and efficient yield of fermentable sugars for the production of biofuels and bio-chemicals with viable titer, rate, and yield (TRY) at industrial scale. The present review aims to provide a critical assessment on the production of fermentable sugars from lignocelluloses with high solid biomass loading. The impact of inhibitors produced during both pretreatment and saccharification has been elucidated. Moreover, the limitations imposed by high solid loading on efficient mass transfer during saccharification process have been elaborated.

Combined sulfuric acid and choline chloride/glycerol pretreatment for efficiently enhancing enzymatic saccharification of reed stalk

In this study, an efficient combination of pretreatment solvents involving Choline chloride/Glycerol (ChCl/Gly) and H2SO4 was firstly developed to assess the pretreatment performance and determine optimal pretreatment conditions. The results illustrated that the H2SO4-[ChCl/Gly] combination efficiently removed lignin (52.6%) and xylan (80.5%) from the pretreated reed stalk, and subsequent enzymatic hydrolysis yielded 91.1% of glucose. Furthermore, several characterizations were conducted to examine the structural and morphological changes of the reed stalk, revealing apparently enhanced accessibility (128.4 to 522.6 mg/g), reduced lignin surface area (357.9 to 229.5 m2/g), and substantial changes on biomass surface. Based on the aforementioned study, possible mechanisms for the H2SO4-[ChCl/Gly] pretreatment of reed stalks were proposed. The comprehensive understanding of combined H2SO4-[ChCl/Gly] pretreatment system for enhancing the saccharification of the reed stalk was interpreted in this work. Overall, this novel approach could be efficiently applied to pretreat and saccharify reed stalks, empowering the biomass refining industry.

A review on natural based deep eutectic solvents (NADESs): fundamentals and potential applications in removing heavy metals from soil

Natural based deep eutectic solvent (NADES) is a promising green solvent to replace the conventional soil washing solvent due to the environmental benign properties such as low toxicity, high biodegradability, high polarity or hydrophilicity, and low cost of fabrication process. The application of NADES is intensively studied in the extraction of organic compounds or natural products from vegetations or organic matters. Conversely, the use of the solvent in removing heavy metals from soil is severely lacking. This review focuses on the potential application of NADES as a soil washing agent to remove heavy metal contaminants. Hydrophilicity is an important feature of a NADES to be used as a soil washing solvent. In this context, choline chloride is often used as hydrogen bond acceptor (HBA) whereby choline chloride based NADESs showed excellent performance in the extraction of various solutes in the past studies. The nature of NADES along with its chemistry, preparation and designing methods as well as potential applications were comprehensively reviewed. Subsequently, related studies on choline chloride-based NADES in heavy metal polluted soil remediation were also reviewed. Potential applications in removing other soil contaminants as well as the limitations of NADES were discussed based on the current advancements of soil washing and future research directions were also proposed.

Chemobiocatalytic transfromation of biomass into furfurylamine with mixed amine donor in an eco-friendly medium

Biobased furfurylamine (FAM) is a versatile platform molecule for producing additives, pharmaceuticals, and pesticides. Recombinant E. coli HNND-AlaDH was created by co-expressing L-alanine dehydrogenase (AlaDH) and mutated Aspergillus terreus ω-transaminase (HNND), aiming to convert furfural (FUR) into FAM using inexpensive L-alanine and isopropylamine as mixed amine donors. In ChCl:FA:OA (10 wt%), pineapple peel, bagasse, barley shell, peanut shell, and corn stalk could be efficiently transformed into FUR under 170 °C for 10 min. Pineapple peel produced a high titer of FUR (183.3 mM). Additionally, the viscosity, surface tension and polarity of ChCl:FA:OA were explored. The biomass-derived FUR was fully transformed to FAM by HNND-AlaDH with amine donor (1:1:1 of L-Ala/isopropylamine/FUR mol/mol/mol) within 300 min. Accordingly, the FAM productivity was 0.58 g/(g xylan in pineapple peel). This chemobiocatalytic strategy established through the combination of chemocatalysis and biocatalysis could be applied to convert renewable biomass into valuable organic amines.

Green solvents extraction-based detoxification to enhance the enzymatic hydrolysis of steam-exploded lignocellulosic biomass and recover bioactive compounds

A novel strategy for pre-treated biomass detoxification combining emerging green solvents and low environmental impact extraction technologies was evaluated. Steam-exploded biomass was subjected to microwave-assisted or orbital shaking extraction using bio-based or eutectic solvents. The extracted biomass was enzymatically hydrolysed. The potential of this detoxification methodology was studied in terms of phenolic inhibitors extraction and sugar production improvement. The effect of adding a post-extraction water washing step before hydrolysis was also evaluated. Excellent results were achieved when steam-exploded biomass was subjected to the microwave-assisted extraction combined with the washing step. The highest sugar production was achieved when ethyl lactate was used as extraction agent (49.80 ± 3.10 g total sugar/L) over the control (30.43 ± 0.34 g total sugar/L). Results suggested that a detoxification step based on green solvents would be a promising option to extract phenolic inhibitors, which can be revalorized as antioxidants, and improve the sugar production from the extracted pre-treated biomass.

Enhancing saccharification of bamboo shoot shells by rapid one-pot pretreatment of hydrated deep eutectic solvent

In this work, a rapid one-pot hydrated deep eutectic solvent (DES) pretreatment was proposed to facilitate the conversion of carbohydrates from lignocellulosic biomass to monosaccharides. Specifically, the pure and hydrated DES based on benzyl triethylammonium chloride (BTEAC), formic acid (FA) and water was used to pretreat bamboo shoot shells (BSS) by microwave heating. The pretreated solid residues were enzymatically saccharified to produce fermentable sugars, and the hydrolyzed carbohydrates and lignin remained in the hydrolyzate. The results showed that the yield of monosaccharides from the hydrated DES hydrolyzate (193.7-228.4 g/kg) was significantly higher than that (45.9-66.1 g/kg) of pure DES. The 30% hydrated DES pretreatment achieved the best glucose yield (89.03%) and a total monosaccharides yield of 555.4 g/kg, which corresponded to a conversion ratio of carbohydrates to monosaccharides of 87.0%. The proposed process is a robust method for the efficiently convert carbohydrates from BSS into monosaccharides.

A novel cetyltrimethylammonium bromide-based deep eutectic solvent pretreatment of rice husk to efficiently enhance its enzymatic hydrolysis

Deep eutectic solvent (DES) has caught widely attention of researchers in biomass pretreatment. As a highly efficient surfactant, cetyltrimethylammonium bromide (CTAB) was expected to be used for synthesizing new DESs with additional functions in pretreatment. In this work, an efficient pretreatment method using a mixture of CTAB and lactic acid (LA) as a novel functional DES was established to improve enzymatic digestion efficiency of rice husk (RH). The results showed that DES CTAB:LA effectively removed lignin (51.5%) and xylan (79.9%) and the enzymatic hydrolysis activity of CTAB:LA-treated RH was 5 times that of RH. Then, a series of characterization demonstrated that a substantial accessibility increased, a hydrophobicity and lignin surface area decreased, and great surface morphology alternation were observed on the treated RH, which explained the increase in enzymatic hydrolysis efficiency. Overall, the discovery of more functional DESs might be motivated and biorefinery pretreatment processes might be greatly promoted.

Selective degradation of hemicellulose and lignin for improving enzymolysis efficiency via pretreatment using deep eutectic solvents

Deep eutectic solvents (DESs) with different acidity and alkalinity were applied for biomass pretreatment, and the conditions were optimized by response surface methodology. The results showed that lactic acid/betaine hydrochloride had the optimal pretreatment efficiency, where the removal rates of hemicellulose and lignin came up to 89% and 73%, and the enzymolysis efficiency was as high as 92%. Furthermore, eight types of chloride salts with different valence states were introduced into the DESs as the third component. The chloride salts could improve the pretreatment efficiency and positively correlated with the metal valence state. Specifically, AlCl₃ was significantly superior in improving the pretreatment efficiency, where the enzymolysis efficiency reached 96% due to the destruction of crystalline region and the esterification of partial cellulose. Therefore, it is proposed that adding highly valent metal salts to acidic DESs has higher pretreatment and enzymatic efficiency.

Dissolution of lignocellulose with high lignin content in AlCl3/ZnCl2 aqueous system and properties of the regenerated cellulose film

Herein, a novel method for dissolving lignocellulose at room temperature is proposed by combining deep eutectic solvents (DES) pretreatment and subsequent dissolution in AlCl₃/ZnCl₂ aqueous system. Results showed that DES pretreatment could significantly increase the dissolubility of lignin-containing cellulose (CL) samples in AlCl₃/ZnCl₂ aqueous system. The dissolution ratio of the CL sample with 15.6 % lignin content in AlCl₃/ZnCl₂·3H₂O solvent was as high as 90 %. Besides, the mechanism for the remarkable dissolution of CL samples in low water AlCl₃/ZnCl₂ aqueous solvent was also proposed. Moreover, the dissolved CL sample was regenerated for the production of lignocellulose films, which have excellent ultraviolet (UV) blocking, hydrophobic, mechanical strength, and natural degradation properties. In particular, the films could be completely naturally degraded after 10 days, which provided a promising way to prepare biodegradable lignocellulose materials, and to encourage the potential utilization of renewable lignocellulose in packaging industry.

Acidic and alkaline deep eutectic solvents (DESs) pretreatment of grapevine: Component analysis, characterization, lignin structural analysis, and antioxidant properties

Deep eutectic solvents (DESs) have been extensively applied to pretreat lignocellulose; however, comparative research on acidic and alkaline DES pretreatment is relatively lacking. Herein, pretreatment of grapevine agricultural by-products with seven DESs were compared in terms of removal of lignin and hemicellulose and component analysis of the pretreated residues. Among the tested DESs, both acidic choline chloride-lactic (CHCl-LA), and alkaline potassium carbonate-ethylene glycol (K₂CO₃-EG) were effective in delignification. Thereafter, the CHCl-LA and K₂CO₃-EG extracted lignin was compared by analyzing their physicochemical structure changes and antioxidant properties. The results showed that the thermal stability, molecular weight, and phenol hydroxyl percentage of CHCl-LA lignin were inferior to K₂CO₃-EG lignin. It was found that the high antioxidant activity of K₂CO₃-EG lignin was mainly attributed to the abundant phenol hydroxyl, guaiacyl (G), and para-hydroxy-phenyl (H). By comparing acidic and alkaline DES pretreatments and their lignin nuances in biorefining, novel insights are derived for the scheduling and selection of DES for lignocellulosic pretreatment.

Exposing and understanding synergistic effects in co-pyrolysis of biomass and plastic waste via machine learning

During co-pyrolysis of biomass with plastic waste, bio-oil yields (BOY) could be either induced or reduced significantly via synergistic effects (SE). However, investigating/ interpreting the SE and BOY in multidimensional domains is complicated and limited. This work applied XGBoost machine-learning and Shapley additive explanation (SHAP) to develop interpretable/ explainable models for predicting BOY and SE from co-pyrolysis of biomass and plastic waste using 26 input features. Imbalanced training datasets were improved by synthetic minority over-sampling technique. The prediction accuracy of XGBoost models was nearly 0.90 R² for BOY while greater than 0.85 R² for SE. By SHAP, individual impact and interaction of input features on the XGBoost models can be achieved. Although reaction temperature and biomass-to-plastic ratio were the top two important features, overall contributions of feedstock characteristics were more than 60 % in the system of co-pyrolysis. The finding provides a better understanding of co-pyrolysis and a way of further improvements.

High solids loading pretreatment: The core of lignocellulose biorefinery as an industrial technology - An overview

Pretreatment is the first and most determinative, yet the least mature step of lignocellulose biorefinery chain. The current stagnation of biorefinery commercialization indicates the barriers of the existing pretreatment technologies are needed to be unlocked. This review focused on one of the core factors, the high lignocellulose solids loading in pretreatment. The high solids loading of pretreatment significantly reduces water input, energy requirement, toxic compound discharge, solid/liquid separation costs, and carbon dioxide emissions, improves the titers of sugars and biproducts to meet the industrial requirements. Meanwhile, lignocellulose feedstock after high solids loading pretreatment is compatible with the existing logistics system for densification, packaging, storage, and transportation. Both the technical-economic analysis and the cellulosic ethanol conversion performance suggest that the solids loading in the pretreatment step need to be further elevated towards an industrial technology and the effective solutions should be proposed to the technical barriers in high solids loading pretreatment operations.

Are natural deep eutectic solvents always a sustainable option? A bioassay-based study

The traditional use of organic solvents in various branches of industry is being rethought as these compounds very often display high volatility, toxicity and lipophilicity (related to the ability to interact with biological membranes). More recently, developments in the field of Green Chemistry are focusing on the design of more sustainable and cost-effective solvent alternatives like Ionic Liquids (ILs), bio-based solvents and natural deep eutectic solvents (NADESs). The present study aimed at performing an ecotoxicological screening of 15 NADESs using an extensive set of marine and freshwater bioassays, based on different endpoints as the following: immobilization of the crustacean Daphnia magna, growth inhibition of Raphidocelis subcapitata and of Phaeodactylum tricornutum, larval development alterations on the serpulid Ficopomatus enigmaticus and bioluminescence inhibition of Aliivibrio fischeri. What emerged was a general absence of toxicity of all samples. However, both algal assays showed a certain degree of biostimulation, up to over 100% growth increase in respect to controls with 8 out of 15 compounds tested with Raphidocelis subcapitata. Despite NADESs-induced negligible toxicity effects to invertebrates, encouraging their labelling as "sustainable" solvents, the liability of their intentional or accidental release into aquatic systems may represent a serious risk in terms of ecosystem functioning impairments.

Structural evolution of lignin after selective oxidation of lignin-carbohydrate complex by chlorine dioxide

Lignin-carbohydrate complexes (LCCs) are important from the perspective of the anti-depolymerization barrier of lignocellulosic biomass, as it limits the high-value utilization of lignocellulosic biomass resources. In this study, the unit structure of lignin in the LCC has been investigated in depth. Oxidation of a selective lignin unit by chlorine dioxide revealed that the LCC structures are enriched with xylanase-macroporous resins, and the structure that was not oxidized in LCC was also identified. At a chlorine dioxide concentration of 90.93 mg/L, 1 g of LCC lignin is oxidized by 0.7 g chlorine dioxide. The purified residual hemicellulose lignin was mainly H-type. The β-O-4' signal was the strongest for the bond between lignin and carbohydrates. Therefore, it is speculated that most of the residual lignin in bamboo-alkali hemicellulose exists in the form of non-phenolic structural units. This study provides a reference for further studies on the specific structures of LCC.

One pot bioprocessing in lignocellulosic biorefinery: A review

Practically, high-yield conversion of biomass into value-added products at low cost is a primary goal for any lignocellulosic refinery. In the industrial context, the limitation in the practical adaptation of the conventional techniques practically involves multiple reactors for the conversion of biomass to bioproducts. Therefore, the present manuscript critically reviewed the advancements in one-pot reaction systems with a major focus on the scientific production of value-added products from lignocellulosic biomass. In view of that, the novelty of one-pot reactions is shown during the fractionation of biomass into their individual constituents. The importance of the direct conversion of cellulose and lignin into a range of valuable products including organic acids and platform chemicals are separately discussed. Finally, the article is concluded with the opportunities, existing troubles, and possible solutions to overcome the challenges in lignocellulosic biorefinery. This article will assist the readers to identify the economic-friendly-one-pot conversion of lignocellulosic biomass.

Double Valorization for a Discard-α-Chitin and Calcium Lactate Production from the Crab Polybius henslowii Using a Deep Eutectic Solvent Approach

Polybius henslowii, an abundant yet unexploited species of swimming crab, was investigated as a potential source of α-chitin and calcium lactate using deep eutectic solvents (DES) as extracting solvents. Choline chloride-malonic acid (CCMA) and choline chloride-lactic acid (CCLA) were used to obtain high purity α-chitin from ball-milled P. henslowii exoskeleton in 2 h at 120 °C, with yields of 12.05 ± 2.54% and 12.8 ± 1.54%, respectively. The physical and chemical characteristics of the obtained chitins were assessed using CHN elemental analysis, attenuated total reflectance-Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Furthermore, the CCLA solvent was reusable three times with little effect on the extract purity, and calcium lactate was produced at the end of the recycling cycles. The ensuing calcium lactate was also characterized in terms of chemical and physical properties. The obtained chitin is a promising raw material for downstream processing and the double valorization pathway with the obtention of calcium salts may increase the viability of a DES-based approach for the processing of mineralized substrates.

Enhancement of separation selectivity of hemicellulose from bamboo using freeze-thaw-assisted p-toluenesulfonic acid treatment at low acid concentration and high temperature

The cellulose-rich residual solids are obtained with p-toluenesulfonic acid (p-TsOH) treatment. However, better fractionation of hemicellulose and separation is difficult to obtain during treatment. This study aims at investigating the separation selectivity of bamboo hemicellulose using freeze-thaw-assisted p-TsOH (F/p-TsOH) treatment. The desired separation effect was achieved at freezing temperature -40 °C, freezing time 20 h, p-TsOH concentration 3.0 %, treatment temperature 130 °C and time 80 min. 93.26 % hemicellulose separation was found, which was 32.88 % higher than that of conventional p-TsOH treatment. Furthermore, the separation yield of lignin decreased significantly from 69.29 % to 13.98 %. The distinct lignin characteristic absorption peaks were found, while that of hemicellulose was difficult to observe. The fiber crystallinity index increased from 50.42 to 56.55 %. Furthermore, greater selectivity for hemicellulose separation was achieved. The results provide a new research thinking for efficient fractionation of lignocellulosic biomass by organic acid treatment.

A review on potential of green solvents in hydrothermal liquefaction (HTL) of lignin

One of the greatest challenges in biorefinery is to reduce biomass' recalcitrance and enable valorization of lignin into higher value compounds. Likewise, green solvents and hydrothermal liquefaction (HTL) with feasible economic viability, functionality, and environmental sustainability have been widely introduced in extraction and conversion of lignin. This review starts with the underscore of disadvantages and limitations of conventional pretreatment approaches and role of green solvents in lignin extraction. Subsequently, the effect of process parameters along with the reaction mechanisms and kinetics on conversion of lignin through HTL were comprehensively reviewed. The limitations of green solvents in extraction and HTL of lignin from biomass were discussed based on the current advancements of the field and future research scopes were also proposed. More details info on HTL of biomass derived lignin which avoid the energy-intensive drying procedures are crucial for the accelerated development and deployment of the advanced lignin biorefinery.

Comparison of alkali and ionic liquid pretreatment methods on the biochemical methane potential of date palm waste biomass

Date palm waste biomass is a readily accessible agricultural waste biomass that may be used to produce biogas. Because the complex structure of date palm waste biomass prevents the embedded holo-cellulosic sugars from biodegrading, pretreatment is required to increase methane (CH₄) yield. The present investigation aimed to comparatively determine the impact of alkali and ionic liquid pretreatment on the biochemical methane potential (BMP) of different types of date palm waste biomass. The findings revealed that ionic liquid pretreated Palm and Fruit bunch showed the highest BMP (321.67 mL CH₄/g-TS) and substrate conversion efficiency (68.01%), respectively, over other biomass samples. In alkali pretreatment, the highest BMP and substrate conversion efficiency were detected with Palm (309.76 mL CH₄/g-TS) and Spathe (62.09%). The high BMP and substrate conversion efficiency of date palm waste biomass may be harnessed for bioenergy production when this ionic liquid pretreatment technology is used.

Recent Advances in the Catalytic Conversion of Biomass to Furfural in Deep Eutectic Solvents

Lignocellulose is recognized as an ideal raw material for biorefinery as it may be converted into biofuels and value-added products through a series of chemical routes. Furfural, a bio-based platform chemical generated from lignocellulosic biomass, has been identified as a very versatile alternative to fossil fuels. Deep eutectic solvents (DES) are new “green” solvents, which have been employed as green and cheap alternatives to traditional organic solvents and ionic liquids (ILs), with the advantages of low cost, low toxicity, and biodegradability, and also have been proven to be effective media for the synthesis of biomass-derived chemicals. This review summarizes the recent advances in the conversion of carbohydrates to furfural in DES solvent systems, which mainly focus on the effect of adding different catalysts to the DES system, including metal halides, water, solid acid catalyst, and certain oxides, on the production of furfural. Moreover, the challenges and perspectives of DES-assisted furfural synthesis in biorefinery systems are also discussed in this review.

Impact of catalytic hydrothermal treatment and Ca/Al-modified hydrochar on lability, sorption, and speciation of phosphorus in swine manure: Microscopic and spectroscopic investigations

The effects of catalytic hydrothermal (HT) pretreatment on animal manure followed by the addition of hydrochar on the nutrients recovery have not yet been investigated using a combination of chemical, microscopic, and spectroscopic techniques. Therefore, a catalytic HT process was employed to pretreat swine manure without additives (manure-HT) and with H₂O₂ addition (manure-HT- H₂O₂) to improve the conversion efficiency of labile or organic phosphorus (P) to inorganic phase. Then, a Ca-Al layered double hydroxide hydrochar (Ca/Al LDH@HC) derived from corn cob biomass was synthesized and applied to enhance P sorption. Scanning electron microscopy (SEM), and three-dimensional excitation emission matrix (3D-EEM), X-ray photoelectron spectroscopy (XPS), P k-edge X-ray absorption near edge structure (XANES), were used to elucidate the mechanisms of P release and capture. The H₂O₂ assisted HT treatment significantly enhanced the release of inorganic P (251.4 mg/L) as compared to the untreated manure (57.2 mg/L). The 3D-EEM analysis indicated that the labile or organic P was transformed and solubilized efficiently along with the deconstruction of manure components after the H₂O₂ assisted HT pretreatment. Application of Ca/Al LDH@HC improved the removal efficiency of P from the derived P-rich HT liquid. This sorption process was conformed to the pseudo-second-order model, suggesting that chemisorption was the primary mechanism. The results of SEM and P k-edge XANES exhibited that Ca, as the dominated metal component, could act as a reaction site for the formation of phosphate precipitation. These results provide critical findings about recovering P from manure waste, which is useful for biowastes management and nutrients utilization, and mitigating unintended P loss and potential environmental risks.

Deep eutectic solvent with bifunctional Brønsted-Lewis acids for highly efficient lignocellulose fractionation

Green and low cost deep eutectic solvents (DESs) are promising to replace the solid acids and ionic liquids in biomass fractionation process. To enhance the lignocellulose pretreatment efficiency, an acidic DES that composed of Brønsted acid (ZnCl₂) as hydrogen bond acceptor and Lewis acid (lactic acid) as hydrogen bond donator was designed. This bifunctional DES was used for the extraction of lignin from poplar sawdust. Under the optimal pretreatment condition, the ZnCl₂-lactic acid DES could recover 95.2 wt% of lignin with a purity of 92.1%. The recovered lignin demonstrated a low polydispersity of 1.67 and small amount of β-aryl-ethers. Moreover, the acidic DES had a good recyclability and reusability. Such performance was attributed to the presence of bifunctional acid sites, which help selectively cleave lignin-carbohydrate complex linkages. The acidity and polarity of Brønsted acid can be modulated by the Lewis acid, thus synergistically promote the lignin extraction and production.

Hydrodynamic cavitation for lignocellulosic biomass pretreatment: a review of recent developments and future perspectives

The hydrodynamic cavitation comes out as a promising route to lignocellulosic biomass pretreatment releasing huge amounts of energy and inducing physical and chemical transformations, which favor lignin-carbohydrate matrix disruption. The hydrodynamic cavitation process combined with other pretreatment processes has shown an attractive alternative with high pretreatment efficiency, low energy consumption, and easy setup for large-scale applications compared to conventional pretreatment methods. This present review includes an overview of this promising technology and a detailed discussion on the process of parameters that affect the phenomena and future perspectives of development of this area.

Recent advances in lignocellulosic biomass for biofuels and value-added bioproducts - A critical review

Lignocellulosic biomass is a highly renewable, economical, and carbon-neutral feedstock containing sugar-rich moieties that can be processed to produce second-generation biofuels and bio-sourced compounds. However, due to their heterogeneous multi-scale structure, the lignocellulosic materials have major limitations to valorization and exhibit recalcitrance to saccharification or hydrolysis by enzymes. In this context, this review focuses on the latest methods available and state-of-the-art technologies in the pretreatment of lignocellulosic biomass, which aids the disintegration of the complex materials into monomeric units. In addition, this review deals with the genetic engineering techniques to develop advanced strategies for fermentation processes or microbial cell factories to generate desired products in native or modified hosts. Further, it also intends to bridge the gap in developing various economically feasible lignocellulosic products and chemicals using biorefining technologies.

Removal of wood extractives as pulp (pre-)treatment: a technological review

Wood extractives usually do not exceed five percent of dry wood mass but can be a serious issue for pulping as well as for the pulp itself. They cause contamination and damages to process equipment and negatively influence pulp quality. This paper addresses not only the extractives-related problems but also different solutions for these issues. It is an extensive review of different technologies for removing wood extractives, starting with methods prior to pulping. Several wood yard operations like debarking, knot separation, and wood seasoning are known to significantly decreasing the amount of wood extractives. Biological treatment has also been proven as a feasible method for reducing the extractives content before pulping, but quite hard to handle. During pulping, the extractives reduction efficiency depends on the pulping method. Mechanical pulping removes the accessory compounds of wood just slightly, but chemical pulping, on the other hand, removes them to a large extent. Organosolv pulping even allows almost complete removal of wood extractives. The residual extractives content can be significantly reduced by pulp bleaching. Nevertheless, different extraction-based methods have been developed for removing wood extractives before pulping or bleaching. They range from organic-solvent-based extractions to novel processes like supercritical fluid extractions, ionic liquids extractions, microwave technology, and ultrasonic-assisted extraction. Although these methods deliver promising results and allow utilization of wood extractives in most cases, they suffer from many drawbacks towards an economically viable industrial-scale design, concluding that further research has to be done on these topics.

Graphical abstract

Wood‑feeding termites as an obscure yet promising source of bacteria for biodegradation and detoxification of creosote-treated wood along with methane production enhancement

This study aims to explore distinct bacterial strains from wood-feeding termites and to construct novel bacterial consortium for improving the methane yield during anaerobic digestion by degrading birchwood sawdust (BSD) and removing creosote (CRO) compounds simultaneously. A novel bacterial consortium CTB-4 which stands for the molecularly identified species Burkholderia sp., Xanthomonas sp., Shewanella sp., and Pseudomonas mosselii was successfully developed. The CTB-4 consortium showed high efficiency in the removal of naphthalene and phenol. It also revealed reduction in lignin, hemicellulose, and cellulose by 19.4, 52.5, and 76.8%, respectively. The main metabolites after the CRO degradation were acetic acid, succinate, pyruvate, and acetaldehyde. Pretreatment of treated BSD mixed with CRO enhanced the total methane yield (162 L/kg VS) by 82.7% and biomass reduction by 54.7% compared to the untreated substrate. CRO showed a toxicity decrease of >90%, suggesting the efficiency of constructed bacterial consortia in bioremediation and biofuel production.