Granule size informs the characteristics and performance of microalgal-bacterial granular sludge for wastewater treatment

Optimal algae species inoculation strategy for algal-bacterial granular sludge: Sludge characteristics, performance and microbial community

The algal-bacterial granular sludge (ABGS) system is emerging as a promising technology for future wastewater treatment. This study assessed the impact of different algae species inoculation on granulation, performance, and microbial communities within ABGS systems. The experimental setup included single-species inoculations (Chlorella sp. (R1), Scenedesmus sp. (R2), and Desmodesmus sp. (R3)) and a mixed-species inoculation strategy (R4). Results revealed that R4 achieved the fastest completed granulation process (15 days) with the largest average granule diameter (772.93 μm) and highest physical strength (2.24 ± 0.26%) in the end of the experiment. The relative abundance of extracellular polymeric substances secreting bacteria of R4 maintained high level in whole operation time. Algae assimilation capacity and the abundance of functional bacteria can also influence removal performance. In mature stage, only the average effluent total nitrogen (3.15 ± 2.87 mg/L), total phosphorus (0.37 ± 0.27 mg/L), chemical oxygen demand (25.25 ± 2.98 mg/L) concentration in R4 was lower than that of Grade I discharge standard of municipal wastewater treatment plants in China. The best inorganic carbon utilization and lipid production ability were observed in R4 and R3, respectively. The choice of inoculated algae species was identified as a key factor for bacterial community dynamics. Overall, above results demonstrated that mixed algae species inoculation can be selected as the optimal algae inoculation strategy due to its excellent granulation, performance, and acceptable carbon utilization and lipid production.

Performance enhancement, bacterial communities optimization and emerging pollutants elimination by microalgal-bacterial consortium for treating aquaculture pond sediments

Aquaculture pond sediments have a notable influence on the ecosystem balance and farmed animal health. In this study, microalgal-bacterial immobilization (MBI) was designed to improve aquaculture pond sediments via synergistic interactions. The physicochemical characteristics, bacterial communities, and the removal efficiencies of emerging pollutants were systematically investigated. The consortium containing diatom Navicula seminulum and Alcaligenes faecalis was cultivated and established in the free and immobilized forms for evaluating the treatment performance. The results indicated that the immobilized group exhibited superior performance in controlling nutrient pollutants, shaping and optimizing the bacterial community compositions with the enrichment of functional bacteria. Additionally, it showed a stronger positive correlation between the bacterial community shifts and nutrient pollutants removal compared to free cells. Furthermore, the immobilized system maintained the higher removal performance of emerging pollutants (heavy metals, antibiotics, and pathogenic Vibrios) than free group. These findings confirmed that the employment of immobilized N. seminulum and A. faecalis produced more synergistic benefits and exerted more improvements than free cells in ameliorating aquaculture pond sediments, suggesting the potential for engineering application of functional microalgal-bacterial consortium in aquaculture.

Oxygen affinity and light intensity induced robust phosphorus removal and fragile ammonia removal in a non-aerated bacteria-algae system

Non-aerated bacteria-algae system gaining O2 through photosynthesis presents an alternative for costly mechanical aeration. This study investigated oxygen supply and performance of nutrients removal at low and high light intensity (LL and HL). The results showed that P removal was high and robust (LL 97 ± 1.8 %, HL 95 % ± 2.9 %), while NH4+-N removal fluctuated dramatically (LL 66 ± 14.7 %, HL 84 ± 8.6 %). Oxygen generated at illumination of 200 μmol m-2 s-1, 6 h was sufficient to sustain aerobic phase for 2.25 g/L MLSS. However, O2 produced by algae was preferentially captured in the order of heterotrophic bacteria (HB), ammonia oxidizing bacteria (AOB), nitrite oxidizing bacteria (NOB). Oxygen affinity coupled with light intensity led to NOB suppression with stable nitrite accumulation ratio of 57 %. Free nitrous acid (FNA) and light stimulated the abundance of denitrifying polyphosphate accumulating organism (DPAO) of Flavobacterium, but with declined P-accumulating metabolism (PAM) of P release, P/C, K/P and Mg/P ratios. Flavobacterium and cyanobacteria Leptolyngbya, along with biologically induced CaP in extracellular polymeric substances was the key to robust P removal. AOB of Ellin6067 and DPAO of Flavobacteria offer a promising scenario for partial nitrification-denitrifying phosphorus removal.

Application of ANN-MOGA for nutrient sequestration for wastewater remediation and production of polyunsaturated fatty acid (PUFA) by Chlorella sorokiniana MSP1

Chlorella bears excellent potential in removing nutrients from industrial wastewater and lipid production enriched with polyunsaturated fatty acids. However, due to the changing nutrient dynamics of wastewater, growth and metabolic activity of Chlorella are affected. In order to sustain microalgal growth in wastewater with concomitant production of PUFA rich lipids, RSM (Response Surface Methodology) followed by heuristic hybrid computation model ANN-MOGA (Artificial Neural Network- Multi-Objective Genetic Algorithm) were implemented. Preliminary experiments conducted taking one factor at a time and design matrix of RSM with process variables viz. Sodium chloride (1 mM-40 mM), Magnesium sulphate (100 mg-800 mg) and incubation time (4th day to 20th day) were validated by ANN-MOGA. The study reported improved biomass and lipid yield by 54.25% and 12.76%, along with total nitrogen and phosphorus removal by 21.92% and 18.72% respectively using ANN-MOGA. It was evident from FAME results that there was a significantly improved concentration of linoleic acid (19.1%) and γ-linolenic acid (21.1%). Improved PUFA content makes it a potential feedstock with application in cosmeceutical, pharmaceutical and nutraceutical industry. The study further proves that C. sorokiniana MSP1 mediated industrial wastewater treatment with PUFA production is an effective way in providing environmental benefits along with value addition. Moreover, ANN-MOGA is a relevant tool that could control microalgal growth in wastewater.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Adaptation mechanisms of microalgal-bacterial granular sludge to outdoor light-limited conditions

Microalgal-bacterial granular sludge (MBGS) has attached attention for sustainable wastewater treatment, but it remains elusive whether it can adapt to outdoor light-limited conditions. This paper investigated the biological adaptation mechanisms of MBGS to outdoor light-limited diel conditions using real municipal wastewater. The results indicated that MBGS still had excellent pollutants removal performance, and that both the extracellular polymeric substances and glycogen content of MBGS increased significantly. The main functional microalgae and bacteria were revealed to be Leptolyngbyaceae and Rhodanobacteria, respectively. Further analyses indicated that the abundance of genes encoding PsbA, PsbD, PsbE, PsbJ, PsbP, Psb27, Psb28-2, PsaC, PsaE, PsaL, PsbX, PetB, PetA, and PetE increased in photosystem. Meanwhile, the abundance of gene encoding Rubisco decreased but the gene abundance regarding to crassulacean acid metabolism cycle increased. These suggested that MBGS could adjust the photosynthetic pathway to ensure the completion of photosynthesis. This study is anticipated to add fundamental insights for the MBGS process operated under outdoor light-limited conditions.

Effect of different inocula on the granulation process, reactor performance and biodiesel production of algal-bacterial granular sludge (ABGS) under low aeration conditions

The algal-bacterial granular sludge (ABGS) system is a prospective wastewater treatment technology, but few studies focused on the effects of different inoculum types on the establishment of the ABGS system under low aeration conditions (step-decrease superficial gas velocity from 1.4 to 0.5 cm/s). Results from this study indicated that compared with other inocula, the ABGS formed by co-inoculating aerobic granular sludge (AGS) and targeted algae (Chlorella) exhibited a shorter granulation period (shortened by 15 days), higher total nitrogen (89.4%) and PO43--P (95.0%) removal efficiencies, and a greater yield of fatty acid methyl esters (FAMEs) (9.04 mg/g MLSS). This was possibly attributed to that the functional bacteria (e.g. Thauera, Gemmobacter and Rhodobacter) in the inoculated AGS facilitated the ABGS granulation. The inoculated algae promoted their effective enrichment under illumination conditions and enhanced the production of extracellular polymeric substances, thus improving the stability of ABGS. The enriched algae were attached to the outer layer of the granules, which could provide sufficient oxygen for bacterial metabolism, revealing the inherent mechanisms for the good stability of ABGS under low aeration intensity. Overall, the rapid granulation of ABGS can be achieved by inoculating optimal inocula under low aeration conditions, which is convenient and economically feasible, and motivates the application of algal-bacterial consortia.

Filamentous cyanobacteria and hydrophobic protein in extracellular polymeric substances facilitate algae-bacteria aggregation during partial nitrification

In algae-bacteria symbiotic wastewater treatment, the excellent settling performance of algae-bacteria aggregates is critical for biomass separation and recovery. Here, the composition of extracellular polymeric substances (EPS), microbial profiles, and functional genes of algae-bacteria aggregates were investigated at different solid retention times (SRTs) (10, 20, and 40 d) during partial nitrification in photo sequencing bioreactors (PSBRs). Results showed that SRTs greatly influenced the nitrogen transformation and the formation and morphological structure of algae-bacteria aggregates. The highest nitrite accumulation, the largest particle size (~1.54 mm) and the best settling performance were observed for the algae-bacteria aggregates in the PSBR with an SRT of 10 d, where the abundant occurrence of filamentous cyanobacteria with the highest ratio of chlorophyll a/b and the lowest EPS amount with the highest protein-to-polysaccharide ratio were observed. In particular, the EPS at 10 d of SRT contained a higher amount of protein-related hydrophobic groups and a lower ratio of α-helix/(β-sheet + random coil), indicating a looser protein structure, which might facilitate the formation and stabilization of algae-bacteria aggregates. Moreover, algal-bacterial aggregation greatly depended on the composition and evolution of filamentous cyanobacteria (unclassified _o__Oscillatoriales and Phormidium accounted for 56.29 % of the identified algae at SRT 10 d). The metagenomic analysis further revealed that functional genes related to amino acid metabolism (e.g., genes of phenylalanine, tyrosine, and tryptophan biosynthesis) were expressed at high levels within 10 d of SRT. Overall, this study demonstrates the influence of EPS structures and filamentous cyanobacteria on algae-bacteria aggregation and reveals the biological mechanisms driving photogranule structure and function.

A novel membrane bioreactor inoculated with algal-bacterial granular sludge for sewage reuse and membrane fouling mitigation: Performance and mechanism

In this study, a novel membrane bioreactor (MBR) inoculated with algal-bacterial granular sludge (ABGMBR) was established to improve pollutant removal and alleviate membrane fouling. The ABGMBR system showed higher pollutant removal rate and longer operation time (152 day) compared to the control MBR (AGMBR). Moreover, the contents of the pollutants such as granular sludges, extracellular polymeric substances (EPS), and soluble microbial products on the membrane were remarkably reduced, leading to the formation of a porous and loose cake layer on the membrane and a slow increase in transmembrane pressure. Standard blocking was the main mechanism of membrane fouling; however, the membrane pore blockage was significantly reduced in ABGMBR. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory suggested that the aggregation and adhesion of foulants on the membrane were greatly inhibited in ABGMBR. Furthermore, correlation analysis showed significant differences in membrane fouling characteristics between AGMBR and ABGMBR. The ABGMBR system effectively retarded sludge disintegration and increased the repulsion between the sludge and membrane owing to the favorable mixed liquor characteristics. This study showcases the superior operational efficiency and anti-fouling performance of ABGMBR, offering a novel perspective on sewage reuse and membrane fouling mitigation.

Enhanced fixation of dissolved inorganic carbon by algal-bacterial aerobic granular sludge during treatment of low-organic-content wastewater

The microalgae-based wastewater treatment technologies are believed to contribute to carbon neutrality. This study investigated the inorganic carbon fixation performance in the algal-bacterial aerobic granular sludge (A-BAGS) process under cultivation at different concentrations of organic carbon (OC) and inorganic carbon (IC). The results indicated that A-BAGS in treating wastewater containing organics of 77 mg-C/L contributed little to the fixation of inorganic carbon, while the highest inorganic carbon removal efficiency of 50 % was achieved at the influent IC of 100 mg/L and OC of 7 mg/L. This high IC condition contributed to enhanced biomass growth rate and enhanced extracellular polymeric substances, while it did not affect the granular stability and nitrification efficiency. The microbial diversity was also largely enhanced. The results demonstrated the great potential of A-BAGS for simultaneous resource recovery in wastewater and inorganic carbon fixation, while operation conditions need to be further optimized.

Cultivation of algal-bacterial granular sludge and degradation characteristics of tetracycline

Due to the increasing use of antibiotics, tetracycline was frequently detected in wastewater. As a novel technology, algal-bacterial granular sludge process is expected to be widely used in wastewater treatment. However, the degradation effect of tetracycline by algal-bacterial granular sludge process and its degradation path is still unknown. In this study, mature and stable algal-bacterial granular sludge was cultured and the degradation of tetracycline by it was investigated. The results showed that the removal amount of 1-25 mg/L tetracycline by algal-bacterial granular sludge was 0.09-1.45 mg/g volatile suspended solids (VSS), in which the adsorption amount was 0.06-0.17 mg/g VSS and the degradation amount was 0.03-1.27 mg/g VSS. Tetracycline biosorption was dominant at its concentration of 1-3 mg/L, while biodegradation was predominant at 5-25 mg/L of tetracycline. At tetracycline concentration of 3-5 mg/L, the contribution of biosorption and biodegradation to tetracycline removal by algal-bacterial granular sludge process was almost equal. Algal-bacterial granular sludge could effectively degrade tetracycline through demethylation, dehydrogenation, deacylation, and deamination or their combination. In addition, the degradation products were nontoxic and hardly pose a threat to environmental health. The research results of this paper provide a solid theoretical basis for tetracycline removal by algal-bacterial granular sludge and a reference for the development of algal-bacterial granular sludge process for wastewater treatment in the presence of tetracycline. PRACTITIONER POINTS: Mature and stable algal-bacterial granular sludge was cultured. Tetracycline was removed by algal-bacterial granular sludge through biosorption and biodegradation. Algal-bacterial granular sludge could degrade tetracycline through demethylation, dehydrogenation, deacylation, and deamination or their combination. The degradation products were nontoxic.

The long overlooked microalgal nitrous oxide emission: Characteristics, mechanisms, and influencing factors in microalgae-based wastewater treatment scenarios

Microalgae-based wastewater treatment is particularly advantageous in simultaneous CO₂ sequestration and nutrients recovery, and has received increasing recognition and attention in the global context of synergistic pollutants and carbon reduction. However, the fact that microalgae themselves can generate the potent greenhouse gas nitrous oxide (N₂O) has been long overlooked, most previous research mainly regarded microalgae as labile organic carbon source or oxygenic approach that interfere bacterial nitrification-denitrification and the concomitant N₂O production. This study, therefore, summarized the amount and rate of N₂O emission in microalgae-based systems, interpreted in-depth the multiple pathways that lead to NO formation as the key precursor of N₂O, and the pathways that transform NO into N₂O. Reduction of nitrite could take place in either the cytoplasm or the mitochondria to form NO by a series of enzymes, while the NO could be enzymatically reduced to N₂O at the chloroplasts or the mitochondria respectively under light and dark conditions. The influences of abiotic factors on microalgal N₂O emission were analyzed, including nitrogen types and concentrations that directly affect the nitrogen transformation routes, illumination and oxygen conditions that regulate the enzymatic activities related to N₂O generation, and other factors that indirectly interfere N₂O emission via NO regulation. The uncertainty of microalgae-based N₂O emission in wastewater treatment scenarios were emphasized, which would be particularly impacted by the complex competition between microalgae and ammonia oxidizing bacteria or nitrite oxidizing bacteria over ammonium or inorganic carbon source. Future studies should put more efforts in improving the compatibility of N₂O emission results expressions, and adopting consistent NO detection methods for N₂O emission prediction. This review will provide much valuable information on the characteristics and mechanisms of microalgal N₂O emission, and arouse more attention to the non-negligible N₂O emission that may impair overall greenhouse gas reduction efficiency in microalgae-based wastewater treatment systems.

Auto-floating oxygenic microalgal-bacterial granular sludge

As an emerging green wastewater treatment technology, the microalgal-bacterial granular sludge (MBGS) process has attracted increasing interest under the current situation of global climate change. However, little information is available for its performance in treating municipal wastewater under outdoor conditions. Thus, this study evaluated the behaviors of MBGS for treating simulated and real municipal wastewater under natural diel conditions. The results showed that a significant accumulation of oxygen bubbles during daily operation led to the auto-floating of the conventional settable MBGS. The removal of organics was relatively stable during day-night cycles, while the removals of total nitrogen and total phosphorus were dependent on the saturated oxygen concentration over 10 mg/L in MBGS system. Furthermore, oxygen bubbles generated by photosynthesis of microalgae (Scenedesmaceae and Cyanobacteria) due to microalgae phototaxis were found to be attached onto the surface of granules, causing the auto-flotation of MBGS. The formation process of the auto-floating oxygenic MBGS was clarified and further analysis suggested that the non-aerated settable MBGS would be able to auto-float at an average outdoor light intensity of 140 μ mol/m²/s. Overall, the auto-floating oxygenic MBGS process was demonstrated to be feasible for real municipal wastewater treatment, even under rainy and cloudy days, advancing the knowledge and adding theoretical basis for its further applications.

Microalgal remediation and valorisation of polluted wastewaters for zero-carbon circular bioeconomy

Overexploitation of natural resources to meet human needs has considerably impacted CO₂ emissions, contributing to global warming and severe climatic change. This review furnishes an understanding of the sources, brutality, and effects of CO₂ emissions and compelling requirements for metamorphosis from a linear to a circular bioeconomy. A detailed emphasis on microalgae, its types, properties, and cultivation are explained with significance in attaining a zero-carbon circular bioeconomy. Microalgal treatment of a variety of wastewaters with the conversion of generated biomass into value-added products such as bio-energy and pharmaceuticals, along with agricultural products is elaborated. Challenges encountered in large-scale implementation of microalgal technologies for low-carbon circular bioeconomy are discussed along with solutions and future perceptions. Emphasis on the suitability of microalgae in wastewater treatment and its conversion into alternate low-carbon footprint bio-energies and value-added products enforcing a zero-carbon circular bioeconomy is the major focus of this review.

Using carbon dioxide-added microalgal-bacterial granular sludge for carbon-neutral municipal wastewater treatment under outdoor conditions: Performance, granule characteristics and environmental sustainability

Microalgal-bacterial granular sludge (MBGS) process has a gorgeous prospect for municipal wastewater treatment, but the research on the treatment of complex organic wastewater by MBGS process with CO₂ addition under outdoor conditions is not enough. Therefore, this paper evaluated the feasibility of CO₂-added MBGS process for complex organic wastewater disposal under natural day-night cycles. The results showed that the addition of CO₂ overall improved the removal efficiency of pollutants. Typically, the removal efficiency of total phosphorus increased averagely from 88.5 % to 95.0 % in 12-h day cycle and from 26.2 % to 45.3 % in 12-h night cycle. The addition of CO₂ increased the size of MBGS from 1.0 mm to 16.5 mm within 30 days due to extracellular polymeric substances secretion and the dominant filamentous microalgae on granules. The decrease of catalase activity and malondialdehyde content indicated that CO₂ reduced oxidative damage and maintained the normal growth of MBGS. Further estimates of the collected gas showed that CO₂-added MBGS process could reduce global CO₂ emissions by one hundred million tons per year. This study is expected to contribute to the goal of carbon neutrality in the area of wastewater treatment by MBGS process.

Advanced insights on removal of antibiotics by microalgae-bacteria consortia: A state-of-the-art review and emerging prospects

Antibiotics abuse has triggered a growing environmental problem, posing a major threat to both ecosystem and human health. Unfortunately, there are still several shortcomings to current antibiotics removal technologies. Microalgae-bacteria consortia have been shown to be a promising antibiotics treatment technology owing to advantages of high antibiotics removal efficiency, low operational cost, and carbon emission reduction. This review aims to introduce the removal mechanisms, influencing factors, and future research perspectives for using microalgae-bacteria consortia to remove antibiotics. The interaction mechanisms between microalgae and bacteria are comprehensively revealed, and their exclusive advantages have been summarized in a "Trilogy" strategy, including "reinforced physical contact", "upgraded substance utilization along with antibiotics degradation", and "robust biological regulation". What's more, the relationship between different interaction mechanisms is emphatically analyzed. The important influencing factors, including concentration and classes of antibiotics, environmental conditions, and operational parameters, of antibiotics removal were also assessed. Three innovative treatment systems (microalgae-bacteria fuel cells (MBFCs), microalgae-bacteria membrane photobioreactors (MB-MPBRs), and microalgae-bacteria granular sludge (MBGS)) along with three advanced techniques (metabolic engineering, machine learning, and molecular docking and dynamics) are then introduced. In addition, concrete implementing schemes of the above advanced techniques are also provided. Finally, the current challenges and future research directions in using microalgae-bacteria consortia to remove antibiotics have been summarized. Overall, this review addresses the current state of microalgae-bacteria consortia for antibiotics treatment and provides corresponding recommendations for enhancing antibiotics removal efficiency.

Resource recovery from municipal wastewater: A critical paradigm shift in the post era of activated sludge

The conventional activated sludge (CAS) process as one of the greatest engineering marvels has made irreplaceable contributions towards the human development in the past one hundred years. However, the underlying principle of CAS which is primarily based on biological oxidation has been challenged by accelerating global climate change. In such a situation, a fundamental question that urgently needs to be answered is what wastewater treatment technology would be in the post era of activated sludge? Thus, this article illustrates the necessity of a technology paradigm shift from the current linear economy to circular economy with the energy and resource recovery from municipal wastewater being a major driver. It is argued that ammonium recovery should be considered towards the sustainable municipal wastewater reclamation. Meanwhile, the potential novel processes with enhanced energy and resource recovery are also discussed, which may offer useful insights into the ways to achieve the carbon-neutral municipal wastewater reclamation.

Effect of filamentous algae in a microalgal-bacterial granular sludge system treating saline wastewater: Assessing stability, lipid production and nutrients removal

In this study modified microalgal-bacterial granular sludge (MBGS) was constructed and employed to compare the performance for treating 1%-5% saline wastewater with aerobic granular sludge (AGS). Filamentous algae were found to flourish at 1% salinity when nutrients were temporarily restricted to low level (COD 0, N 10 mg/L, P 0.5 mg/L). A significant improvement of granule stability was detected as the integrity coefficients of MBGS was only 0.12-0.24 rather than 0.19-0.48 of AGS under 1%-5% salinities, which reduced the risk of particle disintegration. Filamentous algae including Leptolyngbya and Geitlerinema occupied 91.2% of identified algae, and were beneficial for enhancing the biomass content and lipid production to about 1.27-1.37, 3.1-5.0 times than AGS. The MBGS had best nitrogen and phosphorus removal efficiencies of 93.4% and 64.6% at 1% salinity, and showed higher resistance to 3%-5% salinities. This study could provide meaningful information for using this modified MBGS technology in practice.

Granular indigenous microalgal-bacterial consortium for wastewater treatment: Establishment strategy, functional microorganism, nutrient removal, and influencing factor

Granular indigenous microalgal-bacterial consortium (G-IMBC) system integrates the advantages of the MBC and granular activated sludge technologies, also with superior microalgal wastewater adaptation capacity. In this review, the concept of IMBC was firstly described, followed by its establishment and acclimation strategies. Characteristics and advantages of G-IMBC system compared to other IMBC systems (i.e., attached and floc IMBC systems) were then introduced. Moreover, the involved functional microorganisms and their interactions, as well as nutrient removal mechanisms were systematically and critically reviewed. Finally, the influencing factors including wastewater characteristics and operation factors were discussed. This study aims to provide a comprehensive up-to-date summary of the G-IMBC system for sustainable wastewater treatment.

Microalgal-bacterial granular sludge for municipal wastewater treatment: From concept to practice

Recently, increasing interest has been placed in microalgal-bacterial granular sludge (MBGS) in the journey towards the energy and carbon neutrality of municipal wastewater treatment. Different from aerobic granular sludge, the performance of MBGS is mainly determined by the mutualism and symbiosis between coexisting microalgae and bacteria. It appears from the literature that most of studies on MBGS were conducted at small benchtop scales under controlled conditions with synthetic wastewater. Therefore, this article attempts to look into the major engineering gaps between the knowledge generated from numerous laboratory research works and the large-scale application of MBGS, including massive production of MBGS, type of bioreactor, effect of alternate photo and dark metabolisms on effluent quality, resource recovery from waste MBGS, etc. It is clearly demonstrated that MBGS is still at its infant stage, and more effort is strongly needed to identify the technological bottlenecks of full-scale applications, while providing corresponding engineering solutions.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.