Magnetite-loaded rice husk biochar promoted the denitrification performance of Aquabacterium sp. XL4 under low carbon to nitrogen ratio: Optimization and mechanism

Enhanced denitrification and p-nitrophenol removal performance via hydrophilic sponge carriers fixed with dual-bacterial: Optimization, performance, and enhancement mechanism

Effective treatment of industrial wastewater containing complex pollutants, such as nitrate (NO3--N) and organic pollutants, remains a significant challenge to date. Here, a strain Nocardioides sp. ZS2 with denitrification and degradation of p-nitrophenol (PNP) was isolated and its culture conditions were optimized by kinetic analysis. Hydrophilic sponge carriers were prepared using polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC), and chitosan (CS) to construct bioreactors. Furthermore, to further enhance the PNP degradation and denitrification performance of bioreactors, Pseudomonas stutzeri GF2 with denitrification capability was introduced. The results revealed that the removal efficiencies of PNP and NO3--N reached 97.9 % and 91.9 %, respectively, when hydraulic retention time (HRT) of 6 h, C/N of 2.0, and pH of 6.5. The bioreactor exhibited stable denitrification performance even with fluctuations in the influent PNP concentration. The potential functional prediction results revealed that the abundance of amino acids, fatty acids, and carbohydrates increased as the influent C/N decreased, reflecting a tendency of the microbial community to adjust carbon source utilization to maintain cell growth, metabolic balance, and resist adverse C/N environments. This research provides new insights into the effective removal of organic pollutants and NO3--N in wastewater treatment.

Simultaneous removal of ammonia nitrogen, calcium and cadmium in a biofilm reactor based on microbial-induced calcium precipitation: Optimization of conditions, mechanism and community biological response

With the enhancement of environmental governance regulations, the discharge requirements for reverse osmosis wastewater have become increasingly stringent. This study proposes an innovative approach utilizing heterotrophic nitrification and aerobic denitrification (HNAD)-based biomineralization technology, combined with coconut palm silk loaded biochar, to offer a novel solution for resource-efficient and eco-friendly treatment of reverse osmosis wastewater. Zobellella denitrificans sp. LX16 were loaded onto modified coir silk and showed removal efficiencies of up to 97.38, 94.58, 86.24, and 100% for NH4+-N (65 mg L-1), COD (900 mg L-1), Ca2+ (180 mg L-1), and Cd2+ (25 mg L-1). Analysis of the metabolites of microorganisms reveals that coconut palm silk loaded with deciduous biochar (BCPS) not only exerts a protective effect on microorganisms, but also enhances their growth, metabolism, and electron transfer capabilities. Characterization of precipitation phenomena elucidated the mechanism of Cd2+ removal via ion exchange, precipitation, and adsorption. Employing high-throughput and KEGG functional analyses has confirmed the biota environmental response strategies and the identification of key genes like HNAD.

Denitrification driven by additional ferrous (Fe2+) and manganous (Mn2+) and removal mechanism of tetracycline and cadmium (Cd2+) by biogenic Fe-Mn oxides

Zoogloea sp. MFQ7 achieved excellent denitrification of 91.71% at ferrous to manganous ratio (Fe/Mn) of 3:7, pH of 6.5, nitrate concentration of 25 mg L-1 and carbon to nitrogen ratio of 1.5. As the Fe/Mn ratio increasd, the efficiency of nitrate removal gradually decreased, indicating that strain MFQ7 had a higher affinity for Mn2+ than Fe2+. In situ generated biogenic Fe-Mn oxides (BFMO) contained many iron-manganese oxides (MnO2, Mn3O4, FeO(OH), Fe2O3, and Fe3O4) as well as reactive functional groups, which play an significant part in tetracycline (TC) and cadmium (Cd2+) adsorption. The adsorption of TC and Cd2+ by BFMO can better fit the pseudo-second-order and Langmuir models. In addition, multiple characterization results of before and after adsorption indicated that the removal mechanism of BFMO on TC and Cd2+ was probably surface complexation adsorption and redox reactions.

Thermochemical conversion of silkworm by-product into syngas

This study explored the valorisation of silkworm by-product, a major by-product of the silk industry (sericulture), which amounts to 16 million tonnes annually. The focus was on transforming waste into energy resources through pyrolysis under CO2 conditions. In one-stage pyrolysis, the evolution of syngas under N2 was found to be comparable to that under CO2. A notable allocation of carbon to biocrude rather than syngas was observed. The two-stage pyrolysis resulted in increased syngas production. However, achieving a homogeneous reaction between CO2 and the volatiles liberated from silkworm byproduct proved challenging. Indeed, the reaction kinetics governing CO2 reactivity was not fast although the temperature windows of the reaction were aligned in the two-stage pyrolysis. To address this issue, pyrolysis was performed using a Ni-based catalyst to expedite the reaction kinetics. Consequently, syngas formation, particularly CO formation, was significantly enhanced under CO2 conditions compared to that under N2 conditions. The syngas yield under CO2 was 36.42 wt% which was 2-fold higher than that of N2. This suggested the potential of CO2 altering the carbon distribution from biocrude to syngas. This strategy would contribute to the establishment of sustainable production of silk by converting sericulture by-product into energy/chemical resources.

Advances in Fe-modified lignocellulosic biochar: Impact of iron species and characteristics on wastewater treatment

Lignocellulosic biomass is an attractive feedstock for biochar production owing to its high abundance and renewability. Various modified biochars have been extensively studied for wastewater treatment to improve the physical and chemical properties of lignocellulosic biochar (L-BC). Particularly, Fe-modified L-BCs have garnered attention owing to the abundance and eco-friendliness of Fe and the outstanding ability to remove various organic and inorganic contaminants via adsorption, oxidation, reduction, and catalytic reactions. Different iron species (e.g., Fe(0), Fe (hydr)oxide, Fe sulfide, and Fe-Metal) are formed during the preparation of Fe-L-BCs, which can completely differentiate the physical and chemical properties of BCs. This review discusses the advances in the synthesis of different Fe-L-BCs, specific changes in the physical and chemical properties of Fe-L-BCs upon Fe addition, and their impacts on wastewater treatment. The results of this review can demonstrate the unique advantages and drawbacks of Fe-L-BCs for the removal of different types of pollutants.

Mechanisms of nanoscale zero-valent iron mediating aerobic denitrification in Pseudomonas stutzeri by promoting electron transfer and gene expression

Aerobic denitrification and its mechanism by P. stutzeri was investigated in the presence of nanoscale zero-valent iron (nZVI). The removal of nitrate and ammonia was accelerated and the nitrite nitrogen accumulation was reduced by nZVI. The particle size and dosage of nZVI were key factors for enhancing aerobic denitrification. nZVI reduced the negative effects of low carbon/nitrogen, heavy metals, surfactants and salts to aerobic denitrification. nZVI and its dissolved irons were adsorbed into the bacteria cells, enhancing the transfer of electrons from nicotinamide adenine dinucleotide (NADH) to nitrate reductase. Moreover, the activities of NADH-ubiquinone reductase involved in the respiratory system, and the denitrifying enzymes were increased. The expression of denitrifying enzyme genes napA and nirS, as well as the iron metabolism gene fur, were promoted in the presence of nZVI. This work provides a strategy for enhancing the biological denitrification of wastewater using the bio-stimulation of nanomaterials.

Microbially driven Fe-N cycle: Intrinsic mechanisms, enhancement, and perspectives

The iron‑nitrogen (FeN) cycle driven by microbes has great potential for treating wastewater. Fe is a metal that is frequently present in the environment and one of the crucial trace elements needed by microbes. Due to its synergistic role in the microbial N removal process, Fe goes much beyond the essential nutritional needs of microorganisms. Investigating the mechanisms behind the linked Fe-N cycle driven by microbes is crucial. The Fe-N cycle is frequently connected with anaerobic ammonia oxidation (anammox), nitrification, denitrification, dissimilatory nitrate reduction to ammonium (DNRA), Feammox, and simultaneous nitrification denitrification (SND), etc. Although the main mechanisms of Fe-mediated biological N removal may vary depending on the valence state of the Fe, their similar transformation pathways may provide information on the study of certain element-microbial interactions. This review offers a thorough analysis of the facilitation effect and influence of Fe on the removal of nitrogenous pollutants in various biological N removal processes and summarizes the ideal Fe dosing. Additionally, the synergistic mechanisms of Fe and microbial synergistic N removal process are elaborated, covering four aspects: enzyme activity, electron transfer, microbial extracellular polymeric substances (EPS) secretion, and microbial community interactions. The methods to improve biological N removal based on the intrinsic mechanism were also discussed, with the aim of thoroughly understanding the biological mechanisms of Fe in the microbial N removal process and providing a reference and thinking for employing Fe to promote microbial N removal in practical applications.

Long-term performance and biofilms of the novel nano manganese dioxide coupling carbon source pre-loaded biological activated carbon filters for drinking water

In order to accelerate the start-up of biological activated carbon (BAC) filters and enhance ammonium (NH4+-N) removal performance, three substrates (sucrose and/or nano manganese dioxide (nMnO2)) pre-loaded BAC filters were set up to investigate the pollutants removals and microbiological characteristics for a long-term operation of 197 days. The average NH4+-N removal performance treated by the sucrose coupled with nMnO2 loaded BAC filter was the highest (71.18 %), which was 3.83 times of that by the control filter (18.58 %). 29 % of NH4+-N treated by the sucrose coupled with nMnO2 loaded BAC removed through the traditional nitrification and denitrification, or simultaneous nitrification and denitrification (SND) pathways according to the calculation of the alkalinity consumption (6.12 mmol/L). There was no leakage of carbon source and Mn, and no accumulation of nitrite from the substrates loaded BAC. The dominant bacteria in the sucrose coupled with nMnO2 loaded BAC were Dechloromona (accounting for 8.02% of the total bacterial) and Acidaminobacter (accounting for 15.16% of total bacterial) on the Day 180, which had the capacity of nitrification or denitrification. NH4+-N and micropollutants removals treated by the combined process of peracetic acid (PAA) pre-oxidation and substrates loaded BAC were significant due to the generation of assimilable organic carbon (AOC) (5.98 ± 1.93 μg-C/mL) by PAA (100 μM)/Fe2+ pre-oxidation and the higher biomass ((4.57 ± 3.07) × 107 cells/g DW BAC) in the sucrose coupled with nMnO2 loaded BAC filter. Therefore, nMnO2 coupling carbon source pre-loading strategy could not only enhance initial colonization, but also promote pollutants removals for long-term operation.

Microbial induced calcium precipitation by Zobellella denitrificans sp. LX16 to simultaneously remove ammonia nitrogen, calcium, and chemical oxygen demand in reverse osmosis concentrates

In recent years, with the rapid development of industrial revolution and urbanization, the generation and treatment of a large number of salt-containing industrial wastewater has attracted wide attention. A novel salt-tolerant Zobellella denitrificans sp. LX16 with excellent nitrogen removal and biomineralization capabilities was isolated in this experiment. Kinetic experiments were conducted to determine the optimal condition. Under this condition, chemical oxygen demand (COD) can be entirely removed together with ammonia nitrogen, and the removal efficiency of calcium was 88.09%. Growth curves and nitrogen balance tests showed that strain LX16 not only had good HNAD and MICP capabilities, but also had high nitrite reductase and nitrate reductase activities during this process. Three-dimensional fluorescence results reflected that when external carbon sources were lacking or salinity was high, humic acid could effectively enhance the metabolic activity of heterotrophic nitrifying aerobic denitrifying microorganisms through extracellular electron transfer, and the substances produced in the metabolic process could promote biommineralization. Moreover, combined with SEM, SEM-EDS, XRD and FTIR analysis, it is concluded that the microbial surface can provide nucleation sites to form calcium salts, and with the increase of alkalinity to generate Ca5(PO4)3OH. The theoretical basis for the use of biological treatment in reverse osmosis wastewater have been proved by this experiment.

Use of magnetic powder to effectively improve the denitrification employing the activated sludge fermentation liquid as carbon source

Nitrogen removal is often limited in municipal wastewater treatment due to the lack of sufficient carbon source. Utilizing volatile fatty acids (VFAs) from waste activated sludge (WAS) fermentation broth as a carbon source is an ideal alternative to reduce the cost for wastewater treatment plants (WWTPs) and improve denitrification efficiency simultaneously. In this study, an anaerobic system was applied for simultaneous denitrification and WAS fermentation and the addition of magnetic microparticles (MMP) were confirmed to enhance both denitrification and WAS fermentation. Firstly, the addition of MMP increased the nitrate reduction rate by over 25.36% and improve the production of N2. Additionally, the equivalent chemical oxygen demand (COD) of the detected VFAs increased by 7.06%-14.53%, suggesting that MMP promoted the WAS fermentation. The electron transfer efficiency of denitrifies was accelerated by MMP via electron-transporting system (ETS) activity and cyclic voltammetry (CV) experiments, which might result in the promotional denitrification and WAS fermentation performance. Furthermore, the high-throughput sequencing displayed that, MMP enriched key microbes capable of degrading the complex organics (Chloroflexi, Synergistota and Spirochaetota) as well as the typical denitrifies (Bacteroidetes_vadinHA17 and Denitratisoma). Therefore, this study provides a novel strategy to realize simultaneous WAS utilization and denitrification for WWTPs.

Nitrification-denitrification co-metabolism in an algal-bacterial aggregates system for simultaneous pyridine and nitrogen removal

Photosynthetic oxygenation in algal-bacterial symbiotic (ABS) system was mainly concerned to enhance contaminant biodegradation by developing an aerobic environment, while the role of nitrification-denitrification involved is often neglected. In this study, an algal-bacterial aggregates (ABA) system was developed with algae and activated sludge (PBR-1) to achieve simultaneous pyridine and nitrogen removal. In PBR-1, as high as 150 mg·L-1 pyridine could be completely removed at hydraulic residence time of 48 h. Besides, total nitrogen (TN) removal efficiency could be maintained above 80%. Nitrification-denitrification was verified as the crucial process for nitrogen removal, accounting for 79.3% of TN removal at 180 μmol·m-2·s-1. Moreover, simultaneous pyridine and nitrogen removal was enhanced through nitrification-denitrification co-metabolism in the ABA system. Integrated bioprocesses in PBR-1 including photosynthesis, pyridine biodegradation, carbon and nitrogen assimilation, and nitrification-denitrification, were revealed at metabolic and transcriptional levels. Fluorescence in situ hybridization analysis indicated that algae and aerobic species were located in the surface layer, while denitrifiers were situated in the inner layer. Microelectrode analysis confirmed the microenvironment of ABA with dissolved oxygen and pH gradients, which was beneficial for simultaneous pyridine and nitrogen removal. Mechanism of nitrification-denitrification involved in pyridine and nitrogen removal was finally elucidated under the scale of ABA.

Microbially induced calcium precipitation driven by denitrification: Performance, metabolites, and molecular mechanisms

Microbially induced calcium precipitation (MICP) driven by denitrification has attracted extensive attention due to its application potential in nitrate removal from calcium-rich groundwater. However, little research has been conducted on this technique at the molecular level. Here, Pseudomonas WZ39 was used to explore the molecular mechanisms of nitrate-dependent MICP and the effects of Ca²⁺ on bacterial transcriptional regulation and metabolic response. The results exhibited that appropriate Ca²⁺ concentration (4.5 mM) can promote denitrification and the production of ATP, EPSs, and SMPs. Genome-wide analysis showed that the nitrate-dependent MICP was accomplished through heterotrophic denitrification and CO₂ capture. During this process, EPS biosynthesis and Ca²⁺ signaling regulation were involved in the nucleation template supply and Ca²⁺ homeostasis balance. Untargeted transcriptome- and metabolome-association analyses revealed that the addition of Ca²⁺ triggered the significant up-regulation in several key pathways, such as transmembrane transporter and channel activities, amino acid metabolism, fatty acid biosynthesis, and carbon metabolism, which played a momentous role in the mineral nucleation and energy provision. The detailed information provided novel insights for understanding the active control of bacteria on MICP, and has great significance for deepening the cognition of groundwater remediation using nitrate-dependent MICP technique.

Biotransformation of sulfamethoxazole by newly isolated surfactant-producing strain Proteus mirabilis sp. ZXY4: Removal efficiency, pathways, and mechanisms

In this study, the SMX degrading strain Proteus mirabilis sp. ZXY4 with surfactant manufacturing potential was isolated from sludge utilizing blood agar and CTAB agar plate. FTIR analysis indicated that the biosurfactant generated by strain ZXY4 was glycolipid. 3D-EEM demonstrated that SMX biodegradation was strongly connected to biosurfactants, the synergistic effect of biodegradation and biosurfactant made strain ZXY4 have excellent SMX degradation performance. Under the optimal conditions of inoculation dosage of 15%, temperature of 30 ℃, pH of 7 and initial SMX concentration of 5 mg L^-1, strain ZXY4 could completely degrade SMX within 24 h. SMX biodegrades at low concentrations (less than5 mg L^-1) followed by the zero-order kinetic model, high concentration (>5 mg L^-1) is more consistent with the first-order kinetic model. LC-MS analysis revealed 14 SMX degradation intermediates, and five potential biodegradation mechanisms were postulated. The findings provide new insights into the biodegradation of SMX.

Sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms in the aquatic environment

Microorganisms can oxidize Mn(II) to biogenic Mn oxides (BioMnOx), through enzyme-mediated processes and non-enzyme-mediated processes, which are generally considered as the source and sink of heavy metals due to highly reactive to sequestrate and oxidize heavy metals. Hence, the summary of interactions between Mn(II) oxidizing microorganisms (MnOM) and heavy metals is benefit for further work on microbial-mediated self-purification of water bodies. This review comprehensively summarizes the interactions between MnOM and heavy metals. The processes of BioMnOx production by MnOM has been firstly discussed. Moreover, the interactions between BioMnOx and various heavy metals are critically discussed. On the one hand, modes for heavy metals adsorbed on BioMnOx are summarized, such as electrostatic attraction, oxidative precipitation, ion exchange, surface complexation, and autocatalytic oxidation. On the other hand, adsorption and oxidation of representative heavy metals based on BioMnOx/Mn(II) are also discussed. Thirdly, the interactions between MnOM and heavy metals are also focused on. Finally, several perspectives which will contribute to future research are proposed. This review provides insight into the sequestration and oxidation of heavy metals mediated by Mn(II) oxidizing microorganisms. It might be helpful to understand the geochemical fate of heavy metals in the aquatic environment and the process of microbial-mediated water self-purification.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

Design of biorefineries towards carbon neutrality: A critical review

The increase in worldwide demand for energy is driven by the rapid increase in population and exponential economic development. This resulted in the fast depletion of fossil fuel supplies and unprecedented levels of greenhouse gas in the atmosphere. To valorize biomass into different bioproducts, one of the popular and carbon-neutral alternatives is biorefineries. This system is an appropriate technology in the circular economy model. Various research highlighted the role of biorefineries as a centerpiece in the carbon-neutral ecosystem of technologies of the circular economy model. To fully realize this, various improvements and challenges need to be addressed. This paper presents a critical and timely review of the challenges and future direction of biorefineries as an alternative carbon-neutral energy source.

Enhanced nitrate and cadmium removal performance at low carbon to nitrogen ratio through immobilized redox mediator granules and functional strains in a bioreactor

The coexistence of multiple pollutants and lack of carbon sources are challenges for the biological treatment of wastewater. To achieve simultaneous removal of nitrate (NO₃^--N) and cadmium (Cd²⁺) at low carbon to nitrogen (C/N) ratios, 2-hydroxy-1,4-naphthoquinone (HNQ) was selected from three redox mediators as an accelerator for denitrification of heterotrophic strain Pseudomonas stutzeri sp. GF2 and autotrophic strain Zoogloea sp. FY6. Then, halloysite nanotubes immobilized with 2-hydroxy-1,4-naphthoquinone (HNTs-HNQ) were prepared and a bioreactor was constructed with immobilized redox mediator granules (IRMG) as the carrier, which was immobilized with HNTs-HNQ and inoculated with the two strains. The immobilized HNQ and the inoculated strains jointly improved the removal ability of NO₃^--N and Cd²⁺ and the removal efficiency of NO₃^--N (25.0 mg L^-1) and Cd²⁺ (5.0 mg L^-1) were 92.81% and 93.94% at C/N = 1.5 and hydraulic retention time (HRT) = 4 h. The Cd²⁺ was removed by adsorption of iron oxides (FeO(OH) and Fe₃O₄) and IRMG. The electron transport system activity (ETSA) of bacteria was improved and the composition of dissolved organic matter in the effluent was not affected by HNQ. The HNQ promoted the production of FeO(OH) and up-regulated the proportion of Zoogloea (54.75% in the microbial community), indicating that Zoogloea sp. FY6 was dominant in the microbial community. In addition, HNQ influenced the metabolic pathways and improved the relative abundance of some genes involved in nitrogen metabolism and the iron redox cycle.

Effect of fungal pellets on denitrifying bacteria at low carbon to nitrogen ratio: Nitrate removal, extracellular polymeric substances, and potential functions

This research aims to elucidate the effect of fungal pellets (FP) on denitrifying bacteria regarding nitrate (NO₃^--N) removal, extracellular polymeric substances (EPS), and potential functions at a low carbon to nitrogen (C/N) ratio. A symbiotic system of FP and denitrifying bacteria GF2 was established. The symbiotic system showed 100% NO₃^--N removal efficiency (4.07 mg L^-1 h^-1) at 6 h and enhanced electron transfer capability at C/N = 1.5. The interactions between FP and denitrifying bacteria promoted the production of polysaccharides (PS) in EPS. Both the increased PS and the PS provided by FP as well as protein and humic acid-like substances in EPS could be consumed by denitrifying bacteria. FP acted as a protector and provided habitat and nutrients for denitrifying bacteria as well as improved the ability of carbohydrate metabolism, amino metabolism, and nitrogen metabolism of denitrifying bacteria. This study provides a new perspective on the relationship between FP and denitrifying bacteria.

Synchronous removal of ammonia nitrogen, phosphate, and calcium by heterotrophic nitrifying strain Pseudomonas sp. Y1 based on microbial induced calcium precipitation

Pseudomonas sp. Y1, a strain with superior synchronous removal ability of ammonia nitrogen (NH₄⁺-N), phosphate (PO₄^3--P), and calcium (Ca²⁺) was isolated, with the removal efficiencies of 92.04, 99.98, and 83.40 %, respectively. Meanwhile, the chemical oxygen demand (COD) was degraded by 90.33 %. Through kinetic analysis, the optimal cultivated conditions for heterotrophic nitrification-aerobic denitrification (HNAD) and biomineralization were determined. The growth curves experimental results of different nitrogen sources indicated that strain Y1 could remove NH₄⁺-N through HNAD. The results of excitation-emission matrix (EEM) proved that the appearance of extracellular polymeric substances (EPS) promoted the precipitation of phosphate minerals. Finally, the characterization results of the bioprecipitates showed that the HNAD process produced the alkalinity required for microbial induced calcium precipitation (MICP), resulting in the removal of PO₄^3- via adsorption and co-precipitation. This study provides a theoretical basis for the application of microorganisms to achieve synchronous nutrient removal and phosphorus recovery in wastewater.

Enhanced nitrate, fluoride, and phenol removal using polyurethane sponges loaded with rice husk biochar in immobilized bioreactor

Polyurethane sponges loaded with rice husk biochar were prepared to immobilize Aquabacterium sp. CZ3 for intensified removal of nitrate, fluoride (F-), and phenol, with the maximum efficiency of 100 %, 91 %, and 99 %, respectively. The biochar load and increased carbon-to-nitrogen (C:N) ratio (below 3.0) stimulated the secretion of soluble microbial product, improved the electron transport system activity, and promoted denitrification, phenol co-metabolism, and F- and calcium crystallization. The characterization results suggested that F- was removed as fluoride-containing calcium precipitates. According to the microbial community analyses, Aquabacterium was the dominant bacterium. PICRUSt analyses showed that biochar and adequate carbon sources (C:N ratio 3.0) significantly increased the functional abundances of amino acid metabolism, carbohydrate metabolism, energy metabolism, and cell motility. The introduction of biochar reduces the demand for C:N ratio in the system, and expands the application potential of biomineralization technique in the remediation of multiple pollutants contaminated water.

Performance of hydrogel immobilized bioreactors combined with different iron ore wastes for denitrification and removal of copper and lead: Optimization and possible mechanism

Reasonable and efficient removal of mixed pollutants (nitrate and heavy metals) in industrial wastewater under heavy metal pollution has attracted more attention in recent years. The target strain Aquabacterium sp. XL4 was immobilized with different iron ore wastes (IOW) using polyvinyl alcohol (PVA) to construct four immobilized bioreactors. The results showed that when the ratio of C/N was 1.5 and the hydraulic retention time (HRT) was 8.0h, the denitrification performance of the bioreactor was the best, and the maximum denitrification efficiency of the bioreactor with sponge iron (SI) as the iron source was 97.19% (2.42mg L^-1 h^-1). Furthermore, by adjusting the concentration of Cu²⁺ and Pb²⁺, the stress behavior of the bioreactor to heavy metals under the influence of each IOW was investigated. The bioreactor has stronger tolerance and removal efficiency to Pb²⁺ and Cu²⁺ in the presence of pellets ore (PO) and refined iron ore (RO), respectively. Moreover, the high-throughput data showed that Aquabacterium accounted for a high proportion in the immobilized bioreactor, and the prediction of functional genes based on the KEGG database showed that the addition of IOW was closely related to the acceleration of nitrate transformation and the inflow and outflow of iron in cells.

Biological denitrification potential of cellulase-producing Cupriavidus sp. ZY7 and denitrifying Aquabacterium sp. XL4 at low carbon-to-nitrogen ratio: Performance and synergistic properties

This study emphasizes on the cellulase production characteristics of strain ZY7 and its collaboration with nitrate-dependent ferrous oxidizing (NFO) strain XL4 to achieve efficient denitrification at low carbon-to-nitrogen (C/N) ratio. Results indicated that the denitrification efficiency increased from 65.47 to 97.99% at 24 h after co-culture at C/N of 1.0. Three-dimensional fluorescence excitation-emission matrix (3D-EEM) showed significant changes in the intensity of soluble microbial products (SMP), fulvic-like materials, and aromatic proteins after co-culture. Bio-precipitates were characterized by Scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), and X-ray diffraction (XRD), which showed that cellulose structure was disrupted and the metabolites were potential carbon source for denitrification. In addition, cellulase activity suggested that the hydrolysis of β-1,4-glycosidic bonds and oligosaccharides may be the rate-limiting steps in cellulose degradation. This work promoted the understanding of denitrification characteristics of co-culture and expanded the application of cellulose degrading bacteria in sewage treatment.

Simultaneous removal of nitrate, tetracycline, and Pb(II) by iron oxidizing strain Zoogloea sp. FY6: Performance and mechanism

Based on the prevalence of combined antibiotics and heavy metals contamination in the aquatic environment, this study utilized a microbial approach to achieve simultaneous removal of nitrate (NO₃^--N), tetracycline (TTC), and Pb(II). Zoogloea sp. FY6 could achieve an optimal NO₃^--N removal efficiency of 91.5% under C/N ratio of 2.0, at a pH of 6.3, and Fe(II) concentration of 20.23 mg L^-1 based on response surface methodology. Additionally, strain FY6 was further found to achieve 89.9 and 81.7% removal of TTC and Pb(II) at 6 h under the optimal conditions. Finally, the results of Fluorescence excitation-emission matrix, X-ray diffraction, Fourier transform infrared spectrometer, and X-ray photoelectron spectroscopy further proved that the biologically formed nanoscale iron oxides and biological action jointly led to the removal of TTC and Pb(II). This study provided a theoretical basis for the application of microbially driven process to remove multi-pollutants in micro-polluted water bodies.

Enhanced performance and electron transfer of sulfur-mediated biological process under polyethylene terephthalate microplastics exposure

Microplastics are ubiquitous in estuaries, coasts, sewage and wastewater treatment plants (WWTPs), which could arouse unexpected effects on critical microbial processes in wastewater treatment. In this study, polyethylene terephthalate microplastics (PET-MPs) were selected to investigate the mechanism of its influence on the performance of sulfur-mediated biological process from the perspective of microbial metabolic activity, electron transfer capacity and microbial community. The results indicated that the exposure of 50 particles/L PET-MPs improved the chemical oxygen demand (COD) and sulfate removal efficiencies by 6.6 ± 0.5% and 4.5 ± 0.3%, respectively, due to the stimulation of microbial metabolic activity and the enrichment of sulfate-reducing bacteria (SRB) species, such as Desulfobacter. In addition, we found that the PET-MPs promoted Cytochrome C (Cyt C) production and improved the direct electron transfer (DET) capacity mediated by Cyt C. The long-term presence of PET-MPs stimulated the secretion of extracellular polymeric substance (EPS), especially the proteins and humic substances, which have been verified to be electroactive polymers to act as electron shuttles to promote the interspecies electron transfer pathway in sulfur-mediated biological process. Meanwhile, the transformation products (bis-(2-hydroxyethyl) terephthalate (BHET) and Mono (2-hydroxyethyl) terephthalic acid (MHET) of PET-MPs were detected in sulfur-mediated biological process. These findings indicate that the sulfur-mediated biological process has good adaptability to the toxicity of PET-MPs, which strengthens a deeper understanding of the dual function of microplastics in WWTPs.

Newly isolated lysozyme-producing strain Proteus mirabilis sp. SJ25 reduced the waste activated sludge: Performance and mechanism

To promote aerobic digestion of sludge, a lysozyme-producing strain was screened and identified as Proteus mirabilis sp. SJ25. The results of response surface methodology (RSM) showed that at the temperature of 30.8 °C, pH of 6.69, and the inoculum amount of 2.81%, the sludge reduced by 26.58%. Compared with the control group, the removal efficiency of suspended solids (SS) from sludge in the experimental group increased by 14.60%, the release of soluble chemical oxygen demand (SCOD) increased by 2.21 times, and the release of intracellular substances increased significantly. Actinobacteriota, Chloroflexi, Proteobacteria, Bacteroidota, and Firmicutes were the main phyla involved in the sludge reduction process. Strain SJ25 enhanced the degradation rate of sludge by releasing lysozyme lysis to lyse bacteria, enhancing the metabolism and membrane transport of carbohydrates and amino acids. This study provides a new perspective in the field of efficient degradation of waste sludge.

Fungal-sponge composite carriers coupled with denitrification and biomineralization bacteria to remove nitrate, calcium, and cadmium in a bioreactor

The coexistence of nitrate (NO₃^--N) and heavy metals in the aquatic environment causes harm to both the aquatic ecosystem and human health. Here, fungal-sponge composite carriers (FSC) were assembled and immobilized with strain WZ39 in a bioreactor to remove NO₃^--N, Ca²⁺, and Cd²⁺. Stable bioreactor performance under heavy metal pressure was achieved. The highest removal efficiencies of NO₃^--N, Ca²⁺, and Cd²⁺ reached 100, 71.81, and 92.50%, respectively. Bacteria and precipitates were found in fungal mycelium and sponge. The precipitates composed of Ca_3.9(Ca_4.7Cd_0.7)(PO₄)₆(OH)_1.8, CaCO₃, and CdCO₃. Fluorescence excitation-emission matrix (EEM) and flow cytometric (FCM) analysis indicated bacteria in FSC exhibited a strong metabolic activity and high percentage of intact cells under heavy metal stress. High-throughput sequencing results showed Pseudomonas sp. WZ39 played a major role in the bioreactor. The potential functions associated with metabolism, heavy metal transfer, and biofilm formation had high relative abundance in the bioreactor.