A staphylococcal enterotoxin B magnetoelastic immunosensor

Recent advances in bioaffinity strategies for preclinical and clinical drug discovery: Screening natural products, small molecules and antibodies

Bioaffinity drug screening strategies have gained popularity in preclinical and clinical drug discovery for natural products, small molecules and antibodies owing to their superior selectivity, the large number of compounds to be screened and their ability to minimize the time and expenses of the drug discovery process. This paper provides a systematic summary of the principles of commonly used bioaffinity-based screening methods, elaborates on the success of bioaffinity in clinical drug development and summarizes the active compounds, preclinical drugs and marketed drugs obtained through affinity screening methods. Owing to the high demand for new drugs, bioaffinity-guided screening techniques will play a greater part in clinical drug development.

Magnetoelastic Resonance Sensors: Principles, Applications, and Perspectives

Magnetoelastic resonators are gaining attention as an incredibly versatile and sensitive transduction platform for the detection of varied physical, chemical, and biological parameters. These sensors, based on the coupling effect between mechanical and magnetic properties of ME platforms, stand out in comparison to alternative technologies due to their low cost and wireless detection capability. Several parameters have been optimized over the years to improve their performance, such as their composition, surface functionalization, or shape geometry. In this review, the working principles, recent advances, and future perspectives of magnetoelastic resonance transducers are introduced, highlighting their potentials as a versatile platform for sensing applications. First, the fundamental principles governing the magnetoelastic resonators performance are introduced as well as the most common magnetoelastic materials and their main fabrication methods are described. Second, the versatility and technical feasibility of magnetoelastic resonators for biological, chemical, and physical sensing are highlighted and the most recent results and functionalization processes are summarized. Finally, the forefront advances to further improve the performance of magnetoelastic resonators for sensing applications have been identified.

Advances in Chicken IgY-Based Immunoassays for the Detection of Chemical and Biological Hazards in Food Samples

As antibodies are the main biological binder for hazards in food samples, their performance directly determines the sensitivity, specificity, and reproducibility of the developed immunoassay. The overwhelmingly used mammalian-derived antibodies usually suffer from complicated preparation, high cost, frequent bleeding of animals, and sometimes low titer and affinity. Chicken yolk antibody (IgY) has recently attracted considerable attention in the bioanalytical field owing to its advantages in productivity, animal welfare, comparable affinity, and high specificity. However, a broad understanding of the application of IgY-based immunoassay for the detection of chemical and biological hazards in food samples remains limited. Here, we briefly summarized the diversity, structure, and production of IgY including polyclonal and monoclonal formats. Then, a comprehensive overview of the principles, designs, and applications of IgY-based immunoassays for these hazards was reviewed and discussed, including food-borne pathogens, food allergens, veterinary drugs, pesticides, toxins, endocrine disrupting chemicals, etc. Thus, the trend of IgY-based immunoassays is expected, and more IgY types, higher sensitivity, and diversification of recognition-to-signal manners are necessary in the future.

Applications and Advances of Magnetoelastic Sensors in Biomedical Engineering: A Review

We present a comprehensive investigation into magnetoelastic sensors (MES) technology applied to biomedical engineering. This includes the working principles, detection methods, and application fields of MES technology. MES are made of amorphous metallic glass ribbons and are wireless and passive, meaning that it is convenient to monitor or measure the parameters related to biomedical engineering. MES are based on the inverse magnetoelastic (Villari) effect. When MES are subjected to mechanical stress, their magnetic susceptibility will change accordingly. And the susceptibility of MES is directly related to their magnetic permeability. The varying permeability can positively reflect the applied stress. The various detection methods that have been developed for different field applications include measurement of force, stress, and strain, monitoring of various chemical indexes, and consideration of different biomedical parameters such as the degradation rate and force conditions of artificial bone, as well as various physiological indexes including ammonia level, glucose concentration, bacteria growth, and blood coagulation.

A fluorometric assay for staphylococcal enterotoxin B by making use of platinum coated gold nanorods and of upconversion nanoparticles

An aptamer based fluorometric assay is presented for fast and accurate detection of staphylococcal enterotoxin B (SEB). It is making use of platinum-coated gold nanorods (AuNR@Pt) and upconversion nanoparticles (UCNPs). The aptamer against SEB is immobilized on AuNR@Pt while the complementary DNA fragment of SEB aptamer is immobilized on UCNPs. As the concentration of SEB increases, the fluorescence of the satellite assembly (AuNR@Pt-UCNPs) is gradually restored. Under the optimized conditions, fluorescence (best measured at excitation/emission wavelengths of 980/543 nm) linearly increases in the 2.0-400 pg·mL^-1 SEB concentration range. The limit of detection is as low as 0.9 pg·mL^-1 (at an S/N of 3), significantly lower than existing methods. The method was applied to the determination of SEB in spiked milk samples. The average recoveries ranged from 91.2% to 104.6%, confirming the practicality of this method. Graphical abstract Schematic illustration of a fluorometric assay based on inner filter effect (IFE) between platinum coated gold nanorods (AuNR@Pt) and upconversion nanoparticles (UCNPs) for the determination of staphylococcal enterotoxin B (SEB).

Highly Sensitive Colorimetric Biosensor for Staphylococcal Enterotoxin B by a Label-Free Aptamer and Gold Nanoparticles

A simple, sensitive and selective colorimetric biosensor for the detection of Staphylococcal enterotoxin B (SEB) was developed using SEB-binding aptamer (SEB2) as recognition element and unmodified gold nanoparticles (AuNPs) as colorimetric probes. The assay is based on color change from red to purple due to conformational change of aptamer in the presence of SEB, and the phenomenon of salt-induced AuNPs aggregation which could be monitored by naked eye or UV–vis spectrometer. Results showed that the AuNPs can effectively differentiate the SEB induced conformational change of the aptamer in the presence of a given high salt concentration. A linear response in the range of 50 μg/mL to 0.5 ng/mL of SEB concentration was obtained. The assay was highly specific to SEB as compared to other related toxins. The limit of detection (LOD) of SEB achieved within few minutes was 50 ng/mL visually and spectrometric method improved it to 0.5 ng/mL. Robustness of the assay was tested in artificially spiked milk samples and cross-checked using in house developed sandwich ELISA (IgY as capturing and SEB specific monoclonal as revealing antibody) and PCR. This colorimetric assay could be a suitable alternative over existing methods during biological emergencies due to its simplicity, sensitive and cost effectiveness.

Rapid detection of staphylococcal enterotoxin B in milk samples based on fluorescence hybridization chain reaction amplification

A rapid, simple, and sensitive method has been developed to detect staphylococcal enterotoxin B (SEB). To establish the hybridization chain reaction-based aptasensor, we described the new probes of two hairpins (H1 and H2), which were first designed based on the partial complementary sequence of the SEB aptamer (cDNA). The H1 labeled with a fluorophore and a quencher can act as a molecular fluorescence “switch”. Hence, in the presence of SEB, the aptamer binds SEB, while the unbound cDNA triggers HCR to carry out the cyclic hybridization of H1 and H2 so as to turn “ON” the fluorescence through forming long nicked DNA. By using this new strategy, SEB can be sensitively detected within the range of 3.13 ng mL⁻¹ to 100 ng mL⁻¹ with a detection limit of 0.33 ng mL⁻¹ (S/N = 3). Furthermore, the developed method could facilitate the detection of SEB effectively in milk samples.

A new competitive aptasensor combined with HCR was developed for SEB detection.

Wireless Biological Electronic Sensors

The development of wireless biological electronic sensors could open up significant advances for both fundamental studies and practical applications in a variety of areas, including medical diagnosis, environmental monitoring, and defense applications. One of the major challenges in the development of wireless bioelectronic sensors is the successful integration of biosensing units and wireless signal transducers. In recent years, there are a few types of wireless communication systems that have been integrated with biosensing systems to construct wireless bioelectronic sensors. To successfully construct wireless biological electronic sensors, there are several interesting questions: What types of biosensing transducers can be used in wireless bioelectronic sensors? What types of wireless systems can be integrated with biosensing transducers to construct wireless bioelectronic sensors? How are the electrical sensing signals generated and transmitted? This review will highlight the early attempts to address these questions in the development of wireless biological electronic sensors.

A Review of the Methods for Detection of Staphylococcus aureus Enterotoxins

Food safety has attracted extensive attention around the world, and food-borne diseases have become one of the major threats to health. Staphylococcus aureus is a major food-borne pathogen worldwide and a frequent contaminant of foodstuffs. Staphylococcal enterotoxins (SEs) produced by some S. aureus strains will lead to staphylococcal food poisoning (SFP) outbreaks. The most common symptoms caused by ingestion of SEs within food are nausea, vomiting, diarrhea and cramps. Children will suffer SFP by ingesting as little as 100 ng of SEs, and only a few micrograms of SEs are enough to cause SPF in vulnerable populations. Therefore, it is a great challenge and of urgent need to detect and identify SEs rapidly and accurately for governmental and non-governmental agencies, including the military, public health departments, and health care facilities. Herein, an overview of SE detection has been provided through a comprehensive literature survey.

Biosensor: an emerging safety tool for meat industry

The meat industry associated with the health hazards like deadly pathogens, veterinary drugs, pesticide residues, toxins and heavy metals is in need of a tool to tackle the awful situation and ensure safer product to consumer. The growth in the industry, global trade scenario, stringent laws and consumer awareness has placed an extra onus on the meat industry to meet out the expectations and demands. Biosensors are the latest tool of detection in the fast growing industries including the food industry. Hence an attempt is envisaged here to review the possibility of harnessing biosensors as tool of safety to safe guard the consumer health and address safety issues in reference to the common threats of concern in the meat industry.

A novel IgY-Aptamer hybrid system for cost-effective detection of SEB and its evaluation on food and clinical samples

In the present study, we introduce a novel hybrid sandwich-ALISA employing chicken IgY and ssDNA aptamers for the detection of staphylococcal enterotoxin B (SEB). Cloning, expression and purification of the full length recombinant SEB was carried out. Anti-SEB IgY antibodies generated by immunizing white leg-horn chickens with purified recombinant SEB protein and were purified from the immunized egg yolk. Simultaneously, ssDNA aptamers specific to the toxin were prepared by SELEX method on microtiter well plates. The sensitivity levels of both probe molecules i.e., IgY and ssDNA aptamers were evaluated. We observed that the aptamer at 250 ngmL(-1) concentration could detect the target antigen at 50 ngmL(-1) and the IgY antibodies at 250 ngmL(-1), could able to detect 100 ngmL(-1) antigen. We further combined both the probes to prepare a hybrid sandwich aptamer linked immune sorbent assay (ALISA) wherein the IgY as capturing molecule and biotinylated aptamer as revealing probe. Limit of detection (LOD) for the developed method was determined as 50 ngmL(-1). Further, developed method was evaluated with artificially SEB spiked milk and natural samples and obtained results were validated with PCR. In conclusion, developed ALISA method may provide cost-effective and robust detection of SEB from food and environmental samples.

A highly sensitive fluorescence resonance energy transfer aptasensor for staphylococcal enterotoxin B detection based on exonuclease-catalyzed target recycling strategy

An ultrasensitive fluorescence resonance energy transfer (FRET) bioassay was developed to detect staphylococcal enterotoxin B (SEB), a low molecular exotoxin, using an aptamer-affinity method coupled with upconversion nanoparticles (UCNPs)-sensing, and the fluorescence intensity was prominently enhanced using an exonuclease-catalyzed target recycling strategy. To construct this aptasensor, both fluorescence donor probes (complementary DNA1-UCNPs) and fluorescence quencher probes (complementary DNA2-Black Hole Quencher3 (BHQ3)) were hybridized to an SEB aptamer, and double-strand oligonucleotides were fabricated, which quenched the fluorescence of the UCNPs via FRET. The formation of an aptamer-SEB complex in the presence of the SEB analyte resulted in not only the dissociation of aptamer from the double-strand DNA but also both the disruption of the FRET system and the restoration of the UCNPs fluorescence. In addition, the SEB was liberated from the aptamer-SEB complex using exonuclease I, an exonuclease specific to single-stranded DNA, for analyte recycling by selectively digesting a particular DNA (SEB aptamer). Based on this exonuclease-catalyzed target recycling strategy, an amplified fluorescence intensity could be produced using different SEB concentrations. Using optimized experimental conditions produced an ultrasensitive aptasensor for the detection of SEB, with a wide linear range of 0.001-1 ng mL(-1) and a lower detection limit (LOD) of 0.3 pg mL(-1) SEB (at 3σ). The fabricated aptasensor was used to measure SEB in a real milk samples and validated using the ELISA method. Furthermore, a novel aptasensor FRET assay was established for the first time using 30 mol% Mn(2+) ions doped NaYF4:Yb/Er (20/2 mol%) UCNPs as the donor probes, which suggests that UCNPs are superior fluorescence labeling materials for food safety analysis.

Magnetoelastic vibrational biomaterials for real-time monitoring and modulation of the host response

Magnetoelastic (ME) biomaterials are ferromagnetic materials that physically deform when exposed to a magnetic field. This work describes the real-time control and monitoring capabilities of ME biomaterials in wound healing. Studies were conducted to demonstrate the capacity of the materials to monitor changes in protein adsorption and matrix stiffness. In vitro experiments demonstrated that ME biomaterials can monitor cell adhesion and growth in real-time, and a long-term in vivo study demonstrated their ability to monitor the host response (wound healing) to an implant and control local cell density and collagen matrix production at the soft tissue-implant interface. This approach represents a potentially self-aware and post-deployment activated biomaterial coating as a means to monitor an implant surface and provide an adjuvant therapy for implant fibrosis.

A novel electrochemical immunosensor based on magnetosomes for detection of staphylococcal enterotoxin B in milk

In this paper, a novel electrochemical immunosensor to detect staphylococcal enterotoxin B based on bio-magnetosomes, polyaniline nano-gold composite and 1,2-dimethyl-3-butylimidazolium hexafluorophosphate ionic liquid, was developed, and found to exhibit high sensitivity and stability. The specific antibody to staphylococcal enterotoxin B conjugated with the magnetosomes showed rapid immunoreactions and good dispersion, which contributed to the formation of a nanostructurally smooth and dense film on the surface of a gold electrode. Polyaniline nano-gold composite and 1,2-dimethyl-3-butylimidazolium hexafluorophosphate ionic liquid were used to modify the electrode as mediators to improve the electron transfer and offer an excellent biocompatible microenvironment for the antibody to retain its activity to enhance the response of the electrochemical sensor. Under optimal conditions, the developed immunosensor showed a good linear response in the range from 0.05 to 5 ng/mL (R(2)=0.9957) with a detection limit as low as 0.017 ng/mL, compared with the one without magnetosomes (0.05-5 ng/mL, 0.033 ng/mL), this developed immunosensor showed a wider response range and a reduced detection limit. And a good specificity with little adsorption to staphylococcal enterotoxin A, C and Na(+), K(+), Ca(2+) was obtained. Moreover, the immunosensor exhibited a good long-time stability at 4 °C reaching up to 60 days, which showed a relatively long working life. Meanwhile the immunosensor could be regenerated four times using NaOH elution. The sensor also displayed a good repeatability with a relative standard deviation of 5.02% for staphylococcal enterotoxin B detection (1 ng/mL, n=9). Furthermore, high recoveries in milk samples from 81% to 118% were achieved and successfully applied to milk sample detection. The obtained results demonstrate that the developed electrochemical immunosensor is a promising tool for the detection of staphylococcal enterotoxin B in food.

Attomole sensitivity of staphylococcal enterotoxin B detection using an aptamer-modified surface-enhanced Raman scattering probe

In this report, we present a new homogeneous detection method for staphylococcal enterotoxin B (SEB) utilizing core-shell-structured iron-gold magnetic nanoparticles and a gold nanorod surface-enhanced Raman scattering (SERS) probe in solution. Peptide ligand (aptamer) functionalized magnetic gold nanorod particles were used as scavengers for target SEB. After the SEB molecules were separated from the matrix, the sandwich assay procedure was tested by gold nanorod particles that act as SERS probes. The binding constant between SEB and peptide-nanoparticle complex was determined as 8.0 × 10(7) M(-1). The correlation between the SEB concentration and SERS signal was found to be linear within the range of 2.5 fM to 3.2 nM. The limit of detection for the homogeneous assay was determined as 224 aM (ca. 2697 SEB molecules/20 μL sample volume). Also, gold-coated surfaces were used as capture substrates and performances of the two methods were compared. Furthermore, the developed method was evaluated for investigating the SEB specificity on bovine serum albumin (BSA) and avidin and detecting SEB in artificially contaminated milk, blood, and urine.

Interfacial structures and properties of organic materials for biosensors: an overview

The capabilities of biosensors for bio-environmental monitoring have profound influences on medical, pharmaceutical, and environmental applications. This paper provides an overview on the background and applications of the state-of-the-art biosensors. Different types of biosensors are summarized and sensing mechanisms are discussed. A review of organic materials used in biosensors is given. Specifically, this review focuses on self-assembled monolayers (SAM) due to their high sensitivity and high versatility. The kinetics, chemistry, and the immobilization strategies of biomolecules are discussed. Other representative organic materials, such as graphene, carbon nanotubes (CNTs), and conductive polymers are also introduced in this review.

A bioanalytical platform for simultaneous detection and quantification of biological toxins

Prevalent incidents support the notion that toxins, produced by bacteria, fungi, plants or animals are increasingly responsible for food poisoning or intoxication. Owing to their high toxicity some toxins are also regarded as potential biological warfare agents. Accordingly, control, detection and neutralization of toxic substances are a considerable economic burden to food safety, health care and military biodefense. The present contribution describes a new versatile instrument and related procedures for array-based simultaneous detection of bacterial and plant toxins using a bioanalytical platform which combines the specificity of covalently immobilized capture probes with a dedicated instrumentation and immuno-based microarray analytics. The bioanalytical platform consists of a microstructured polymer slide serving both as support of printed arrays and as incubation chamber. The platform further includes an easy-to-operate instrument for simultaneous slide processing at selectable assay temperature. Cy5 coupled streptavidin is used as unifying fluorescent tracer. Fluorescence image analysis and signal quantitation allow determination of the toxin's identity and concentration. The system's performance has been investigated by immunological detection of Botulinum Neurotoxin type A (BoNT/A), Staphylococcal enterotoxin B (SEB), and the plant toxin ricin. Toxins were detectable at levels as low as 0.5-1 ng · mL(-1) in buffer or in raw milk.

Analysis of staphylococcal enterotoxin A in milk by matrix-assisted laser desorption/ionization-time of flight mass spectrometry

Staphylococcal enterotoxin A (SEA) is an exotoxin excreted mainly by Staphylococcus aureus and nowadays is the most prevalent compound in staphylococcal food poisoning worldwide. SEA is highly heat-resistant, and usual cooking times and temperatures are unlikely to completely inactivate it. A procedure for extraction of this toxin based on protein precipitation with a mixture of dichloromethane and acidified water was used before SDS-PAGE separation of soluble proteins. Finally, bands of interest were excised from the gel and in-gel enzymatic digestion was done. SEA from pasteurized milk was detected with matrix-assisted laser-desorption/ionization-time of flight (MALDI-TOF) mass spectrometry. Nineteen peptides (range 800-2400 Da) were identified as products of trypsin cleavage of the SEA standard with a score of 204 and 73% coverage of the protein sequence, whereas thirteen peptides were revealed for SEA extracted from milk with a score of 148 and 58% sequence coverage obtained. This procedure has been applied successfully for identification of SEA in milk.

Theory, instrumentation and applications of magnetoelastic resonance sensors: a review

Thick-film magnetoelastic sensors vibrate mechanically in response to a time varying magnetic excitation field. The mechanical vibrations of the magnetostrictive magnetoelastic material launch, in turn, a magnetic field by which the sensor can be monitored. Magnetic field telemetry enables contact-less, remote-query operation that has enabled many practical uses of the sensor platform. This paper builds upon a review paper we published in Sensors in 2002 (Grimes, C.A.; et al. Sensors2002, 2, 294–313), presenting a comprehensive review on the theory, operating principles, instrumentation and key applications of magnetoelastic sensing technology.

Carbon nanotubes with enhanced chemiluminescence immunoassay for CCD-based detection of Staphylococcal enterotoxin B in food

Enhanced chemiluminescence (ECL) detection can significantly enhance the sensitivity of immunoassays but often requires expensive and complex detectors. The need for these detectors limits broader use of ECL in immunoassay applications. To make ECL more practical for immunoassays, we utilize a simple cooled charge-coupled device (CCD) detector combined with carbon nanotubes (CNTs) for primary antibody immobilization to develop a simple and portable point-of-care immunosensor. This combination of ECL, CNT, and CCD detector technologies is used to improve the detection of Staphylococcal enterotoxin B (SEB) in food. Anti-SEB primary antibodies were immobilized onto the CNT surface, and the antibody-nanotube mixture was immobilized onto a polycarbonate surface. SEB was then detected by an ELISA assay on the CNT-polycarbonate surface with an ECL assay. SEB in buffer, soy milk, apple juice, and meat baby food was assayed with a LOD of 0.01 ng/mL using our CCD detector, a level similar to the detection limit obtained with a fluorometric detector when using the CNTs. This level is far more sensitive than the conventional ELISA, which has a LOD of approximately 1 ng/mL. Our simple, versatile, and inexpensive point-of-care immunosensor combined with the CNT-ECL immunoassay method described in this work can also be used to simplify and increase sensitivity for many other types of diagnostics and detection assays.

Eliminating unwanted nanobubbles from hydrophobic solid/liquid interfaces: a case study using magnetoelastic sensors

Air bubbles are known to form at the liquid/solid interface of hydrophobic materials upon immersion in a liquid (Holmberg, M.; Kdühle, A.; Garnaes, J.; Mørch, K. A.; Boisen, A. Langmuir 2003, 19, 10510-10513). In the case of gravimetric sensors, air bubbles that randomly form at the liquid-solid interface result in poor sensor-to-sensor reproducibility. Herein a superhydrophilic ZnO nanorod film is applied to the originally hydrophobic surface of a resonance-based magnetoelastic sensor. The superhydrophilic coating results in the liquid completely spreading across the surface, removing unwanted air bubbles from the liquid/sensor interface. The resonance amplitude of uncoated (bare) and ZnO-modified sensors are measured in air and then when immersed in saline solution, ethylene glycol, or bovine blood. In comparison to the bare, hydrophobic sensors, we find that the standard deviation of the resonance amplitudes of the liquid-immersed ZnO-nanorod-modified sensors decreases substantially, ranging from a 27% decrease for bovine blood to a 67% decrease for saline. The strategy of using a superhydrophilic coating can be applied to other systems having similar interfacial problems.

Application of magnetoelastic sensors for quantifying sediment deposition rates and sizes

This paper describes the application of magnetoelastic sensors for quantifying the size and deposition rate of sediment samples in costal areas, lakes, and rivers. The magnetoelastic sensor, which is made of inexpensive amorphous ferromagnetic alloy, measures parameters of interest by tracking the changes in its resonant frequency and/or amplitude. Since an increase in mass loading on the sensor surface changes its resonant frequency and amplitude, the deposition rate of sediment particles can be determined in real time by tracking these two quantities. Based on a theoretical model, the size distribution of the sediment particles was also estimated from the deposition rate.

Measurement of staphylococcal enterotoxin B in serum and culture supernatant with a capture enzyme-linked immunosorbent assay

Staphylococcal enterotoxin B (SEB) is a select agent because it is a potent mitogen that elicits life-threatening polyclonal T-cell proliferation and cytokine production at very low concentrations. Efforts are in progress to develop therapeutic reagents and vaccines that neutralize or prevent the devastating effects of this toxin. Because of its rapid binding to in vivo receptors, this toxin is difficult to detect in serum. This rapid binding also constitutes a major challenge for the development of effective therapeutic reagents that can neutralize the effects of the toxin in vivo. We have developed a highly sensitive capture enzyme-linked immunosorbent assay that detects SEB in body fluids at very low levels. With this assay, the peak levels of SEB in serum and renal clearance can be measured in mice. After either oral ingestion or nasal inhalation of SEB by mice, this assay documents the transcytosis of SEB across the mucosal membranes into serum within 2 h. Furthermore, this assay was used to compare the SEB levels in different murine models for SEB-induced lethal shock and demonstrated that the coadministration of toxin-enhancing chemicals, such as D-galactosamine and lipopolysaccharide, can alter the peak serum SEB levels. Hence, this assay is a potentially useful tool for the study of the pharmacokinetics of SEB and the effects of potential therapeutic reagents on serum SEB levels.

A wireless pH sensor using magnetoelasticity for measurement of body fluid acidity

The determination of body fluid acidity using a wireless magnetoelastic pH-sensitive sensor is described. The sensor was fabricated by casting a layer of pH-sensitive polymer on a magnetoelastic ribbon. In response to an externally applied time-varying magnetic field, the magnetoelastic sensor mechanically vibrates at a characteristic frequency that is inversely dependent upon the mass of the pH polymer film, which varies as the film swells and shrinks in response to pH. As the magnetoelastic sensor is magnetostrictive, the mechanical vibrations of the sensor launch magnetic flux that can be detected remotely using a pickup coil. The sensor can be used for direct measurements of body fluid acidity without a pretreatment of the sample by using a filtration membrane. A reversible and linear response was obtained between pH 5.0 and 8.0 with a measurement resolution of pH 0.1 and a slope of 0.2 kHz pH(-1). Since there are no physical connections between the sensor and the instrument, the sensor can be applied to in vivo and in situ monitoring of the physiological pH and its fluctuations.

Magnetic biosensor for the detection of Yersinia pestis

A novel type of magnetic-beads based magnetic biosensor is described for the detection of Yersinia pestis. Experiments were performed with the antigen fraction F1 of these bacteria. The magnetic sensor platform offers easy and reliable detection of Y. pestis by the use of magnetic beads for labelling and quantification in a single step due to their paramagnetic features. The system uses antiYPF1 antibodies as capture element on ABICAP columns as core element of the magnetic sensor. Several immobilization methods for antibodies on polyethylene were exploited. The established biosensor has a linear detection range of 25-300 ng/ml Y. pestis antigen F1 and a detection limit of 2.5 ng/ml in buffer and human blood serum. The presented sensor system is small, simple, portable and therefore usable as off-lab detection unit for medical and warfare analytes.

A quantitative real-time immuno-PCR approach for detection of staphylococcal enterotoxins

Bacterial intoxications represent a substantial public health concern with enterotoxins produced by Staphylococcus aureus among the most common causes of food poisoning. In addition to their role in the pathogenicity of food poisoning, staphylococcal enterotoxins have profound effects on the immune system as members of the family of pyrogenic toxin superantigens. As the classical diagnostic bioassays as well as the routinely used immunological methods are hampered by several drawbacks regarding sensitivity, specificity, and practicability, there is a need for the timely identification of toxins by highly sensitive and specific methods. To combine the versatility of an enzyme immunoassay (EIA) with the amplification power of the PCR, a quantitative real-time immuno-PCR (qRT-iPCR) was developed for the detection of staphylococcal enterotoxins A and B and compared to a commercially available EIA. A broadly applicable tool for signal amplification of pre-formed immunocomplexes was established by covalent binding of a reporter DNA to secondary detection antibodies. Therefore, the amino-modified reporter DNA was coupled successfully to N-succinimidyl-S-actyl-thioacetate-activated secondary detection antibodies. The qRT-iPCR was able to detect highly reproducibly as low as approximately 0.6 to 6 pg (4 to 40 amol/microl) of staphylococcal enterotoxin B and staphylococcal enterotoxin A, respectively. In conclusion, the qRT-iPCR approach was shown to overcome clearly the sensitivity limit of traditional immunological detection procedures for bacterial toxins, as demonstrated in this study for staphylococcal enterotoxins. The development of a stable antibody-DNA conjugate providing a universal signal amplification offers a versatile as well as a highly sensitive and specific tool for diagnostic and research purposes generally applicable for pre-formed antibody-antigen complexes.

CRP determination based on a novel magnetic biosensor

The c-reactive protein (CRP) is a very significant human blood marker for inflammatory processes and is routinely determined for many clinical purposes. The widespread and well established detection method for this approximately 115 kDa hepatic protein is the high-sensitivity ELISA assay (hsCRP-ELISA) in blood serum. New approaches in medical CRP diagnosis (e.g. for CVD, inflammatory bowel disease) require rapid quantification in native matrices. A novel CRP determination method based on magnetic detection is described and tested for human blood serum, saliva and urine. The detection principle is based on two different anti-CRP antibodies (monoclonal, IgG) for CRP trapment and labelling. The linear detection range of this immunosensor ranged from 25 ng/ml to 2.5 microg/ml and is therefore much more sensitive than typical hsCRP-ELISA-assays.

Trends in detection of warfare agents. Detection methods for ricin, staphylococcal enterotoxin B and T-2 toxin

An overview of the different detection methods available for ricin, staphylococcal enterotoxin B (SEB) and T-2 toxin is presented here. These toxins are potential biological warfare agents (BWA). The aim of this review is not to cover all the papers that had been published but rather to give an overall picture of the trend in the detection methodologies for potential biological warfare agents as we do see the emerging threats from these three toxins. The advantages and disadvantages of each methodology as well as the detection limit will be reviewed. It seems that mass spectrometry has created a niche for analysis of proteinaceous toxins, ricin and SEB as well as molecular toxin, T-2 toxin given its high sensitivity, high selectivity, high specificity and capability to identify and quantify unknown agents simultaneously in a short time frame. But its main drawbacks are its sophisticated instrumentation and its high cost. Improvised immunoassay may be an alternative.

Current and developing technologies for monitoring agents of bioterrorism and biowarfare

Recent events have made public health officials acutely aware of the importance of rapidly and accurately detecting acts of bioterrorism. Because bioterrorism is difficult to predict or prevent, reliable platforms to rapidly detect and identify biothreat agents are important to minimize the spread of these agents and to protect the public health. These platforms must not only be sensitive and specific, but must also be able to accurately detect a variety of pathogens, including modified or previously uncharacterized agents, directly from complex sample matrices. Various commercial tests utilizing biochemical, immunological, nucleic acid, and bioluminescence procedures are currently available to identify biological threat agents. Newer tests have also been developed to identify such agents using aptamers, biochips, evanescent wave biosensors, cantilevers, living cells, and other innovative technologies. This review describes these current and developing technologies and considers challenges to rapid, accurate detection of biothreat agents. Although there is no ideal platform, many of these technologies have proved invaluable for the detection and identification of biothreat agents.