Bilayer lipid membranes supported on Teflon filters: A functional environment for ion channels

Measurement and Monitoring of Particulate Matter in Construction Sites: Guidelines for Gravimetric Approach

Studies on particulate matter (PM) from construction activities are still at an early stage. Thus, there is still no consensus on standardized experimental methods for monitoring PM in construction sites, which impedes the advancement of knowledge on this subject. This work proposes guidelines for measuring and monitoring the concentration of suspended PM and the annoyance generated by sedimented particles on construction sites in urban areas. These guidelines aim to reduce the variability and uncertainties that exist during the PM sampling processes at construction sites. This study adopts a literature review strategy in order to update the available scientific literature based on empirical evidence obtained in experimental PM studies and relevant documents from government agencies. The proposed guidelines were applied in a study protocol for gravimetric monitoring PM and annoyance tracking generated by sedimented particles using sticky pads. As a result, this article details sampling techniques, procedures, and instruments, focusing on gravimetric sampling, highlighting their characteristics compared to other monitoring approaches. Additionally, it points out a series of parameters for the measurement and monitoring of PM. This paper seeks to support future researchers in this area, inform decision making for experimental sampling, and provide a benchmark for measuring and monitoring PM at construction sites.

Influence of Substrate Hydrophilicity on Structural Properties of Supported Lipid Systems on Graphene, Graphene Oxides, and Silica

Pristine graphene, a range of graphene oxides, and silica substrates were used to investigate the effect of surface hydrophilicity on supported lipid bilayers by means of all-atom molecular dynamics simulations. Supported 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid bilayers were found in close-contact conformations with hydrophilic substrates with as low as 5% oxidation level, while self-assembled monolayers occur on pure hydrophobic graphene only. Lipids and water at the surface undergo large redistribution to maintain the stability of the supported bilayers. Deposition of bicelles on increasingly hydrophilic substrates shows the continuous process of reshaping of the supported system and makes intermediate stages between self-assembled monolayers and supported bilayers. The bilayer thickness changes with hydrophilicity in a complex manner, while the number of water molecules per lipid in the hydration layer increases together with hydrophilicity.

Lipid membrane-based therapeutics and diagnostics

Success rates in drug discovery are extremely low, and the imbalance between new drugs entering clinical research and their approval is steadily widening. Among the causes of the failure of new therapeutic agents are the lack of safety and insufficient efficacy. On the other hand, timely disease diagnosis may enable an early management of the disease, generally leading to better and less costly outcomes. Several strategies have been explored to overcome the barriers for drug development and facilitate diagnosis. Using lipid membranes as platforms for drug delivery or as biosensors are promising strategies, due to their biocompatibility and unique physicochemical properties. We examine some of the lipid membrane-based strategies for drug delivery and diagnostics, including their advantages and shortcomings. Regarding synthetic lipid membrane-based strategies for drug delivery, liposomes are the archetypic example of a successful approach, already with a long period of well-succeeded clinical application. The use of lipid membrane-based structures from biological sources as drug carriers, currently under clinical evaluation, is also discussed. These biomimetic strategies can enhance the in vivo lifetime of drug and delivery system by avoiding fast clearance, consequently increasing their therapeutic window. The strategies under development using lipid membranes for diagnostic purposes are also reviewed.

Rapid Access to Giant Unilamellar Liposomes with Upper Size Control: Membrane-Gated, Gel-Assisted Lipid Hydration

Combining gel-assisted lipid hydration with membrane-based lipid extrusion, we demonstrate here a general procedure for rapid preparation of giant unilamellar liposomes with upper size control. Featured in this procedure are planar lipid stacks deposited on poly(vinyl alcohol) gel, which are further laminated atop with microporous polycarbonate membranes. Control of liposome size is thus realized through the uniform-sized pores of the latter, which provide the only access for the underlying lipids to enter the main aqueous phase upon hydration. Production of both single-phased and biphasic (Janus) liposomes using several commonly employed model lipids, including 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and cholesterol, is presented. The size distribution, yield and lamellarity of these liposome products are characterized and analyzed in detail by confocal fluorescence microscopy. This procedure thus offers a simple and fast alternative route to giant unilamellar liposomes with upper size control.

Lysenin Channels as Sensors for Ions and Molecules

Lysenin is a pore-forming protein extracted from the earthworm Eisenia fetida, which inserts large conductance pores in artificial and natural lipid membranes containing sphingomyelin. Its cytolytic and hemolytic activity is rather indicative of a pore-forming toxin; however, lysenin channels present intricate regulatory features manifested as a reduction in conductance upon exposure to multivalent ions. Lysenin pores also present a large unobstructed channel, which enables the translocation of analytes, such as short DNA and peptide molecules, driven by electrochemical gradients. These important features of lysenin channels provide opportunities for using them as sensors for a large variety of applications. In this respect, this literature review is focused on investigations aimed at the potential use of lysenin channels as analytical tools. The described explorations include interactions with multivalent inorganic and organic cations, analyses on the reversibility of such interactions, insights into the regulation mechanisms of lysenin channels, interactions with purines, stochastic sensing of peptides and DNA molecules, and evidence of molecular translocation. Lysenin channels present themselves as versatile sensing platforms that exploit either intrinsic regulatory features or the changes in ionic currents elicited when molecules thread the conducting pathway, which may be further developed into analytical tools of high specificity and sensitivity or exploited for other scientific biotechnological applications.

Lipid membranes supported by planar porous substrates

Biological membranes play key roles in cell life, but their intrinsic complexity motivated the study and development of artificial lipid membranes with the primary aim to reconstitute and understand the natural functions in vitro. Porous-supported lipid membrane (pSLM) has emerged as a flexible platform for studying the surface chemistry of the cell due to their high stability and fluidity, and their ability to study the transmembrane process of the molecules. In this review, the pSLM, for the first time, to our knowledge, was divided into three types according to the way of the porous materials support the lipid membrane, containing the lipid membrane on the pores of the porous materials, the lipid membrane on both sides of the porous materials, the lipid membrane in the pores of the porous materials. All of these pSLMs were systematically elaborated from several aspects, including the substrates, formation, and characterization. Meanwhile, the advantages and disadvantages of each model membranes were summarized. Finally, suggestions for selecting appropriate pSLM and future directions in this area are discussed.

Passive permeability assay of doxorubicin through model cell membranes under cancerous and normal membrane potential conditions

Doxorubicin is an anti-cancer drug that is important for breast cancer therapy. In this study, the effects of the membrane potential of breast cancer cells (-30 mV) and normal breast epithelial cells (-60 mV) on doxorubicin (DOX) permeability was studied. To achieve this goal, black lipid membranes (BLMs) as a model cell membrane were formed with DPhPC phospholipids in a single aperture of a Teflon sheet by the Montal and Mueller method. The presence of the BLM was characterized by capacitive measurements. The measured specific capacitance of 0.6 µF/cm² after applying the Montal and Mueller method, confirming the presence of a BLM in the aperture. In addition, the very low current leakage of the BLM (9-24 pA) and ClyA-protein channel insertion in the BLM indicate the compactness, high quality, and thickness of 3-5 nm of the BLM. Afterwards, the permeability of doxorubicin through the BLM was studied at defined cell conditions (37 °C and pH 7.4), as well as cancerous and healthy epithelial-cell membrane potentials (-30 mV and -60 mV, respectively). The results show a slow DOX penetration within the first few hours, which increases rapidly with time. The initial slow penetration can be attributed to an electrostatic interaction between doxorubicin and DPhPC molecules in the model cell membrane. Furthermore, a MTT assay on MCF-10A and MCF-7 under different concentrations of doxorubicin confirmed that the cancerous MCF-7 cell line is more resistant to doxorubicin in comparison with the non-cancerous MCF-10A. Such studies highlight important strategies for designing and tuning the interaction efficacy of novel pharmaceuticals at molecular level.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Recent Lipid Membrane-Based Biosensing Platforms

The investigation of lipid films for the construction of biosensors has recently given the opportunity to manufacture devices to selectively detect a wide range of food toxicants, environmental pollutants, and compounds of clinical interest. Biosensor miniaturization using nanotechnological tools has provided novel routes to immobilize various “receptors” within the lipid film. This chapter reviews and exploits platforms in biosensors based on lipid membrane technology that are used in food, environmental, and clinical chemistry to detect various toxicants. Examples of applications are described with an emphasis on novel systems, new sensing techniques, and nanotechnology-based transduction schemes. The compounds that can be monitored are insecticides, pesticides, herbicides, metals, toxins, antibiotics, microorganisms, hormones, dioxins, etc.

Lipid Membrane Nanosensors for Environmental Monitoring: The Art, the Opportunities, and the Challenges

The advent of nanotechnology has brought along new materials, techniques, and concepts, readily adaptable to lipid membrane-based biosensing. The transition from micro-sensors to nano-sensors is neither straightforward nor effortless, yet it leads to devices with superior analytical characteristics: ultra-low detectability, small sample volumes, better capabilities for integration, and more available bioelements and processes. Environmental monitoring remains a complicated field dealing with a large variety of pollutants, several decomposition products, or secondary chemicals produced ad hoc in the short- or medium term, many sub-systems affected variously, and many processes largely unknown. The new generation of lipid membranes, i.e., nanosensors, has the potential for developing monitors with site-specific analytical performance and operational stability, as well as analyte-tailored types of responses. This review presents the state-of-the art, the opportunities for niche applicability, and the challenges that lie ahead.

Gramicidin ion channels in a lipid bilayer supported on polyelectrolyte multilayer films: an electrochemical impedance study

Supported membranes on polymer cushions are of fundamental interest as models for cell membranes. The use of polyelectrolyte multilayers (PEMs) assembled by the layer by layer (LbL) technique as supports for a bilayer allows for easy integration of the lipid bilayer on surfaces and devices and for nanoscale tunable spacing of the lipid bilayer. Controlling ionic permeability in lipid bilayers supported on PEMs triggers potential applications in sensing and as models for transport phenomena in cell membranes. Lipid bilayers displaying gramicidin channels are fabricated on top of polyallylamine hydrochloride (PAH) and polystyrene sulfonate (PSS) multilayer films, by the assembly of vesicles of phosphatidylcholine and phosphatidylserine, 50 : 50 M/M, carrying gramicidin (GA). Quartz crystal microbalance with dissipation shows that the vesicles with GA fuse into a bilayer. Atomic force microscopy reveals that the presence of GA alters the bilayer topography resulting in depressions in the bilayer of around 70 nm in diameter. Electrochemical impedance spectroscopy (EIS) studies show that supported bilayers carrying GA have smaller resistances than the bilayers without GA. Lipid layers carrying GA display a higher conductance for K⁺ than for Na⁺ and are blocked in the presence of Ca²⁺.

Electrophysiology of Epithelial Sodium Channel (ENaC) Embedded in Supported Lipid Bilayer Using a Single Nanopore Chip

Nanopore-based technologies are highly adaptable supports for developing label-free sensor chips to characterize lipid bilayers, membrane proteins, and nucleotides. We utilized a single nanopore chip to study the electrophysiology of the epithelial Na⁺ channel (ENaC) incorporated in supported lipid membrane (SLM). An isolated nanopore was developed inside the silicon cavity followed by fusing large unilamellar vesicles (LUVs) of DPPS (1,2-dipalmitoyl-sn-glycero-3-phosphoserine) and DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) to produce a solvent-free SLM with giga-ohm (GΩ) sealed impedance. The presence and thickness of SLM on the nanopore chip were confirmed using atomic force spectroscopy. The functionality of SLM with and without ENaC was verified in terms of electrical impedance and capacitance by sweeping the frequency from 0.01 Hz to 100 kHz using electrochemical impedance spectroscopy. The nanopore chip exhibits long-term stability for the lipid bilayer before (144 h) and after (16 h) incorporation of ENaC. Amiloride, an inhibitor of ENaC, was utilized at different concentrations to test the integrity of fused ENaC in the lipid bilayer supported on a single nanopore chip. The developed model presents excellent electrical properties and improved mechanical stability of SLM, making this technology a reliable platform to study ion channel electrophysiology.

Solid-phase biological assays for drug discovery

In the past 30 years, there has been a significant growth in the use of solid-phase assays in the area of drug discovery, with a range of new assays being used for both soluble and membrane-bound targets. In this review, we provide some basic background to typical drug targets and immobilization protocols used in solid-phase biological assays (SPBAs) for drug discovery, with emphasis on particularly labile biomolecular targets such as kinases and membrane-bound receptors, and highlight some of the more recent approaches for producing protein microarrays, bioaffinity columns, and other devices that are central to small molecule screening by SPBA. We then discuss key applications of such assays to identify drug leads, with an emphasis on the screening of mixtures. We conclude by highlighting specific advantages and potential disadvantages of SPBAs, particularly as they relate to particular assay formats.

Optical waveguide lightmode spectroscopic techniques for investigating membrane-bound ion channel activities

Optical waveguide lightmode spectroscopic (OWLS) techniques were probed for monitoring ion permeation through channels incorporated into artificial lipid environment. A novel sensor set-up was developed by depositing liposomes or cell-derived membrane fragments onto hydrophilic polytetrafluoroethylene (PTFE) membrane. The fibrous material of PTFE membrane could entrap lipoid vesicles and the water-filled pores provided environment for the hydrophilic domains of lipid-embedded proteins. The sensor surface was kept clean from the lipid holder PTFE membrane by a water- and ion-permeable polyethylene terephthalate (PET) mesh. The sensor set-up was tested with egg yolk lecithin liposomes containing gramicidin ion channels and with cell-derived membrane fragments enriched in GABA-gated anion channels. The method allowed monitoring the move of Na⁺ and organic cations through gramicidin channels and detecting the Cl^–-channel functions of the (α₅β₂γ₂) GABA_A receptor in the presence or absence of GABA and the competitive GABA-blocker bicuculline.

Engineering lipid bilayer membranes for protein studies

Lipid membranes regulate the flow of nutrients and communication signaling between cells and protect the sub-cellular structures. Recent attempts to fabricate artificial systems using nanostructures that mimic the physiological properties of natural lipid bilayer membranes (LBM) fused with transmembrane proteins have helped demonstrate the importance of temperature, pH, ionic strength, adsorption behavior, conformational reorientation and surface density in cellular membranes which all affect the incorporation of proteins on solid surfaces. Much of this work is performed on artificial templates made of polymer sponges or porous materials based on alumina, mica, and porous silicon (PSi) surfaces. For example, porous silicon materials have high biocompatibility, biodegradability, and photoluminescence, which allow them to be used both as a support structure for lipid bilayers or a template to measure the electrochemical functionality of living cells grown over the surface as in vivo. The variety of these media, coupled with the complex physiological conditions present in living systems, warrant a summary and prospectus detailing which artificial systems provide the most promise for different biological conditions. This study summarizes the use of electrochemical impedance spectroscopy (EIS) data on artificial biological membranes that are closely matched with previously published biological systems using both black lipid membrane and patch clamp techniques.

hERG ion channel pharmacology: cell membrane liposomes in porous-supported lipid bilayers compared with whole-cell patch-clamping

The purpose of this study was to obtain functional hERG ion channel protein for use in a non-cell-based ion channel assay. hERG was expressed in Sf9 insect cells. Attempts to solubilise the hERG protein from Sf9 insect cell membranes using non-ionic detergents (NP40 and DDM) were not successful. We therefore generated liposomes from the unpurified membrane fraction and incorporated these into porous Teflon-supported bilayer lipid membranes. Macroscopic potassium currents (1 nA) were recorded that approximated those in whole-cell patch-clamping, but the channels were bidirectional in the bilayer lipid membrane (BLM). Currents were partially inhibited by the hERG blockers E4031, verapamil, and clofilium, indicating that the protein of interest is present at high levels in the BLM relative to endogenous channels. Cell liposomes produced from Sf9 insect cell membranes expressing voltage-gated sodium channels also gave current responses that were activated by veratridine and inhibited by saxitoxin. These results demonstrate that purification of the ion channel of interest is not always necessary for liposomes used in macro-current BLM systems.

Natural and artificial ion channels for biosensing platforms

The single-molecule selectivity and specificity of the binding process together with the expected intrinsic gain factor obtained when utilizing flow through a channel have attracted the attention of analytical chemists for two decades. Sensitive and selective ion channel biosensors for high-throughput screening are having an increasing impact on modern medical care, drug screening, environmental monitoring, food safety, and biowarefare control. Even virus antigens can be detected by ion channel biosensors. The study of ion channels and other transmembrane proteins is expected to lead to the development of new medications and therapies for a wide range of illnesses. From the first attempts to use membrane proteins as the receptive part of a sensor, ion channels have been engineered as chemical sensors. Several other types of peptidic or nonpeptidic channels have been investigated. Various gating mechanisms have been implemented in their pores. Three technical problems had to be solved to achieve practical biosensors based on ion channels: the fabrication of stable lipid bilayer membranes, the incorporation of a receptor into such a structure, and the marriage of the modified membrane to a transducer. The current status of these three areas of research, together with typical applications of ion-channel biosensors, are discussed in this review.

Potential analytical applications of lysenin channels for detection of multivalent ions

Transmembrane protein transporters possessing binding sites for ions, toxins, pharmaceutical drugs, and other molecules constitute excellent candidates for developing sensitive and selective biosensing devices. Their attractiveness for analytical purposes is enhanced by the intrinsic amplification capabilities shown when the binding event leads to major changes in the transportation of ions or molecules other than the analyte itself. The large-scale implementation of such transmembrane proteins in biosensing devices is limited by the difficulties encountered in inserting functional transporters into artificial bilayer lipid membranes and by the limitations in understanding and exploiting the changes induced by the interaction with the analyte for sensing purposes. Here, we show that lysenin, a pore-forming toxin extracted from earthworm Eisenia foetida, which inserts stable and large conductance channels into artificial bilayer lipid membranes, functions as a multivalent ion-sensing device. The analytical response consists of concentration and ionic-species-dependent macroscopic conductance inhibition most probably linked to a ligand-induced gating mechanism. Multivalent ion removal by chelation or precipitation restores, in most cases, the initial conductance and demonstrates reversibility. Changes in lipid bilayer membrane compositions leading to the absence of voltage-induced gating do not affect the analytical response to multivalent ions. Microscopic current analysis performed on individual lysenin channels in the presence of Cu(2+) revealed complex open-closed transitions characterized by unstable intermediate sub-conducting states. Lysenin channels provide an analytical tool with a built-in sensing mechanism for inorganic and organic multivalent ions, and the excellent stability in an artificial environment recommend lysenin as a potential candidate for single-molecule detection and analysis.

Porous Materials to Support Bilayer Lipid Membranes for Ion Channel Biosensors

To identify materials suitable as membrane supports for ion channel biosensors, six filter materials of varying hydrophobicity, tortuosity, and thickness were examined for their ability to support bilayer lipid membranes as determined by electrical impedance spectroscopy. Bilayers supported by hydrophobic materials (PTFE, polycarbonate, nylon, and silanised silver) had optimal resistance (14–19 GΩ) and capacitance (0.8–1.6 μF) values whereas those with low hydrophobicity did not form BLMs (PVDF) or were short-lived (unsilanised silver). The ability of ion channels to function in BLMs was assessed using a method recently reported to improve the efficiency of proteoliposome incorporation into PTFE-supported bilayers. Voltage-gated sodium channel activation by veratridine and inhibition by saxitoxin showed activity for PTFE, nylon, and silanised silver, but not polycarbonate. Bilayers on thicker, more tortuous, and hydrophobic materials produced higher current levels. Bilayers that self-assembled on PTFE filters were the longest lived and produced the most channel activity using this method.